Used Seny D-75 H for sale (85,431)

Condition: good (used), Rolling pressure 220 kN Ø Pieces 3mm min; 70mm max Pitch 6mm max Nedpfxevyyyxo Ai Tjwn Grooving pitch 2.25mm max Roller width 160mm max Ø Roller 133mm min; 170mm max Roller shaft speed 24 30 38 45 62 72 90 114 rpm Ø Roller carrier shaft 54mm standard; 69.85 special Distance between shafts 135mm min; 230mm max Working stroke 15min max Feed rate 0.5mm/s to 6mm/s Laminating time 0.1s to 100s Pause time 0.1s to 100s Main motor 5.5 Kw Electrical power consumption 8.6 Kw Tank capacity 130 L Weight approx 2100 Kg

Condition: used, functionality: limited functionality, overall weight: 2,100 kg, workpiece diameter (max.): 70 mm, spindle diameter: 54 mm, type of input current: three-phase, spindle speed (max.): 114 rpm, spindle speed (min.): 24 rpm, roll width: 160 mm, stroke length: 15 mm, SENY D-75-B – Hydraulic Thread Rolling Machine – 220 kN For sale is a fully functional hydraulic thread rolling machine from the Spanish manufacturer SENY, model D-75-B, with a maximum rolling force of 220 kN. Due to operational changes, the machine has been taken out of service and is no longer in productive use. However, it is still operational and can be inspected and demonstrated under power after prior appointment. The machine is designed for chip-free cold forming of external threads, as well as for knurling and profile rolling operations. The thread rolling process enables the production of high-strength threads with very good surface quality, without removing material. Technical data General information Manufacturer: SENY Country of manufacture: Spain Type: D-75-B Factory number: 327 Machine type: Hydraulic thread rolling machine Year of manufacture: Unknown Operating voltage: 380 V three-phase Rolling capacity and machining range Maximum rolling force: 220 kN (approx. 22.4 t) Workpiece diameter: 3–70 mm Maximum thread pitch: 6 mm Maximum knurling pitch: 2.25 mm Maximum rolling width: 160 mm Rolling spindles Rolling diameter: 133–170 mm Rolling spindle diameter: 54 mm (standard version) Rolling spindle spacing: 135–230 mm Rolling spindle speeds: 24 / 30 / 38 / 45 / 62 / 72 / 90 / 114 rpm Hydraulics and feed Hydraulic roller feed Maximum working stroke: 15 mm Feed speed: 0.5–6 mm/s Adjustable rolling time: 0.1–100 seconds Adjustable pause time: 0.1–100 seconds Hydraulic oil tank: approx. 130 liters Drive power Main motor: 5.5 kW Total electrical power consumption: approx. 8.6 kW Nwedpfxez Sl Aro Ai Ten Weight Machine weight: approx. 2,100 kg Condition and scope of supply Used industrial machine Fully functional Taken out of service due to operational changes Machine is still operational Inspection and demonstration under power possible after prior appointment No thread rolling tools or rolling sets included in the scope of supply Possible applications The machine is particularly suitable for the production of external threads on screws, bolts, threaded rods and other cylindrical workpieces. In addition, knurling and profile rolling operations are possible with the appropriate tools. The robust machine design and hydraulic feed enable use in both single-piece production and series production. Inspection and further information The machine can be inspected and demonstrated under power after prior appointment. Further information and pictures are available on request. Note: The technical data is based in part on manufacturer and comparative documentation of the SENY D-75-B series. Deviations due to the year of manufacture or design may occur. All information without guarantee. Subject to prior sale.

Condition: used, Year of construction: 2000, functionality: fully functional, machine/vehicle number: 308, Technical characteristics: ⚙️ Core Specifications Nwodpfxjxx Nuxo Ai Ton Attribute Value Thread Diameter Range: 3 mm to 75 mm Rolling Pressure: 0.5 to 20 tons Max Thread Length (Plunge): 160 mm Max Thread Length (Through): 2000 mm Speed Range: 24 to 114 rpm (8-step gearbox) Tool Diameter: 145 mm to 200 mm Roll Spindle Diameter: 54 mm Shaft Distance: 130 mm to 200 mm Machine Dimensions (L×W×H): 1880 (INCLUDING HYDRAULIC UNIT) × 991 × 1270 mm Weight: ~1.6 tons 🧰 Features & Capabilities Variable Rolling Pressure: Adjustable to suit different materials and thread profiles. Heavy-Duty Construction: Built for long-term industrial use with high repeatability. Manual or Semi-Automatic Operation: Depending on configuration and accessories. Machine status: WORKING

Condition: excellent (used), Year of construction: 2005, Shinohara 75 V H Year: 2005 Counter: 21 million Nedpfx Aie Adzguj Tewn 5 colors Maximum format: 520 x 750 mm Maximum plate format: 745 x 605 mm Thickness: 0.04–0.60 mm Maximum speed: 16,000 sheets/hour Double impression cylinder CIP 3 IR Powder sprayer Alcohol-based dampening system Baldwin cooling and circulation system High-pile delivery Remote ink fountain control Semi-automatic plate changing (Autoplate) Automatic washing of rollers and rubber blankets

Condition: ready for operation (used), Year of construction: 2023, operating hours: 362 h, functionality: fully functional, machine/vehicle number: 12430021383, travel distance X-axis: 750 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 560 mm, controller model: Siemens 840D sl Operate, spindle speed (max.): 20,000 rpm, Auction of a DMG DMU 75 Monoblock + Pallet Handling PH150! Only 362 spindle hours! TECHNICAL DETAILS Travel in X-axis: 750 mm Travel in Y-axis: 650 mm Travel in Z-axis: 560 mm Main drive and spindle Main drive: AC motor, digitally controlled Motor spindle: speedMASTER Warranty period of the motor spindle: 36 months Speed range: max. 20,000 rpm Spindle mount: HSK-A 63 Acceleration time: approx. 2.6 s Deceleration time: approx. 2.6 s Drive power at 40% duty cycle: 35 kW Drive power at 100% duty cycle: 25 kW Spindle torque at 40% duty cycle: 130 Nm Spindle torque at 100% duty cycle: 86 Nm Spindle bearing inner diameter (front): 80 mm Spindle bearing inner diameter (rear): 55 mm Number of T-slots: 4 × 14 H12 T-slot spacing: 63 mm Centering bore: 50 mm Thread: 8 × M12 Tilting axis A Tilting angle towards the working spindle: +120° Tilting angle away from the working spindle: −120° Torque of tilting axis: 3,400 Nm Holding torque of tilting axis: 3,400 Nm Holding torque of tilting axis with hydraulic clamping: 6,200 Nm Rapid traverse of tilting axis: 40 rpm Feed rate of tilting axis: 20 rpm Input and display resolution: 0.001° Bidirectional accuracy of tilting axis A: A ≤ 9 arc seconds Permissible moment of inertia of tilting axis: max. 59 kg·m² Rotary axis C Rotary range of C-axis: 360° Torque of rotary axis: 2,000 Nm Holding torque of rotary axis: 2,000 Nm Feed rate of rotary axis: 7,200°/min Bidirectional accuracy of rotary axis C: A ≤ 7 arc seconds Table load: max. 600 kg Permissible moment of inertia of rotary axis: max. 48 kg·m² Workpiece diameter: max. 840 mm Machinable diameter: 650 mm Workpiece height: 500 mm MACHINE DETAILS Control system: Siemens 840D sl Operate Cooling system: Liquid cooling Lubrication: Oil-air lubrication Operating hours Nwodpfxoz I Tcij Ai Tsn Power-on hours (according to counter): 1,166 h Spindle hours (according to counter): 362 h Further technical data can be found in the attached offers.

Condition: used, Year of construction: 1988, Technical details: pressure: 10 t workpiece diameter - max.: 40 mm threading length: 70-80 mm workpiece diameter min/max: 3 / 40 mm revolution per minute: 47-94 U/min feed speed: 0,5 - 6 mm/s Nwjdew D Aq Tepfx Ai Ten work stroke: max. 7 mm total power requirement: 4,68 kW Weight approx.: 1,4 t dimensions of machine: 1,4 x 1,4 x 1,7 B T H m dimensions of hydaulic: 0,8 x 1,2 m Hydraulic drive manual and automatic cycle adjustable roller speed max. thread diameter 40mm min. thread diameter 3mm up to 3.5 mm pitch max. pitch 1.75mm roller width min. 80 mm max. 120mm shaft speed 47-94 roller shaft diameter 40 various rollers as accessories *

Year of construction: 1995, condition: good (used), 2 Die Thread Rolling machine SENY, Type D-44 EH, Versatile for all types of work, manual and automatic cycles, easily adapted to automating loading,range of cycle times and roll speeds.operating pressure 100Kn, workpiwcw min 3mm max 40mm,lead 3,5 max, pitch of serrations 1,75mm max, roll length 80mm, diameter roll min 80mm max 120mm,roll spindle speeds 47-94, roll spindle diameter 40mm,distance between rolling spindles 80mm minim 165mm max, working stroke 7, feed 0,5mm/s minim 6mm/s maxim, rolling time,variable 0,1-100 seg, swivelling roll spindles +-5º,main motor 3Kw, connected electrical load 4,68kw, tank capacity 150L,aprox weigth 1100kg Nedpfspwbvkjx Ai Tjwn

Condition: like new (used), Year of construction: 2007, operating hours: 106 h, functionality: fully functional, color channels: 5-colour with coater, paper width (min.): 585 mm, paper width (max.): 740 mm, Great XL 75 machine in excellent condition and equipment Nwedex S Npfjpfx Ai Ton Lacquer tower (chamber blade system) Prinect Axis Control Prinect Press Center with remote control for ink zones, ink ducts, and circumferential, lateral, and diagonal register with Job Memory Card and touch screen Alcolor Vario film dampening units with recirculation and cooling CombiStar ink unit temperature control (water-cooled) Autoplate XL fully automatic simultaneous plate changing system (plate change in 1 minute for 5 plates!!) Preset automatic format adjustment automatic ink roller cleaning device automatic blanket and impression cylinder cleaning device Grafix powder sprayer IR dryer DryStar 2000 Extended high pile delivery Standard accessories

Condition: used, Year of construction: 2021, Chamber dryer for recycled plastics. Nsdsztzzgopfx Ai Tewn Manufacturer: Creative Machine Building Center Year of manufacture: 2021 Power supply: 400 V Power: 75 kW Capacity: 700 kg/h (soft plastics) 1000 kg/h (hard plastics) External dimensions of the machine: - length: 4,000 mm - width: 1,500 mm - height: 2,600 mm Includes a belt conveyor. Technical condition: used

Condition: new, Year of construction: 2023, functionality: fully functional, overall weight: 17,400 kg, power: 257 kW (349.42 HP), We offer this new Lindner Urraco 75 D twin-shaft shredder, manufactured in 2023. Serial number: 8185 Type: Urraco 75 D Year of manufacture: 2023 Power: 257 kW Weight: 17.4 t Magnet: 1.0 t Nwsdsz Sqzfepfx Ai Tsn If you have any further questions or require more information, please send us a message or call.

Condition: used, Year of construction: 2021, operating hours: 4,119 h, functionality: fully functional, machine/vehicle number: 7187, overall weight: 20,000 kg, year of last overhaul: 2026, fuel type: diesel, We are offering this used Lindner crusher, model Urraco 75D, manufactured in 2020, for sale. The installed grinding unit has been completely refurbished. An additional grinding unit (unrefurbished) is included in the price. Nodpszc Izmjfx Ai Tswn If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, functionality: fully functional, Year of construction: 2001, operating hours: 13,363 h, load capacity: 4,500 kg, lifting height: 4,350 mm, free lift: 150 mm, fuel type: diesel, mast type: simplex, construction height: 3,031 mm, fork carriage width: 1,350 mm, fork length: 2,200 mm, drive type: Diesel, construction width: 1,350 mm, Diesel forklift Load center: 500 Fork width: 150 mm Fork thickness: 50 mm ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Standard Transmission: Hydrostatic / 2-pedal Speed class: 20 Condition: Ready for use and fully functional Technical condition: good Front tire type: Superelastic Front tire size: 250-15 Nodpe Admd Sefx Ai Town Front tire condition: New Rear tire type: Superelastic Rear tire size: 250-15 Rear tire condition: New Description: Delivery with new maintenance / FEM 4.004 inspection including inspection certificate. If you have any further questions, please do not hesitate to call us. In addition to this model, we have approximately 150 other forklifts in stock. Visit our website for leasing & financing options. We will gladly provide you with a quote for delivery at favorable conditions. Trade-in of Linde equipment is also possible – even without purchasing a device from us. The stated operating hours were recorded as of the date of listing. Subject to prior sale, changes and errors. Push forks, side shifters, fork positioner Kaup fork positioner with separate side shifter 3rd valve, 4th valve, rear work light, front work light, heater, full cabin, safety light, LED

Condition: like new (used), Year of construction: 1998, functionality: fully functional, Swivel spindle milling machine VEMA TFMS 2-4 Nwodpfx Ais Afaugs Tjn in very good condition, like new; the machine comes from a correctional facility and has only been idle for the past few years; it has been used very little and operated by only one person. VEMA is a company from Northern Germany; the machine's design is similar to the KÖLLE F45 or the PANHANS 240. everything functions perfectly all bearings and guides are in good condition year of manufacture 1998 the machine has the control panel on top with a milling stop that can be adjusted on one side or completely in depth; this is possible with a handwheel in each case. For complete adjustment, there is a mechanical counter; the counter can be set to zero at any point by pressing a button, allowing the stop to be adjusted quickly and very precisely. both stop jaws can also be adjusted individually; there are also 2 mechanical counters, which allow for one-sided adjustment and also enable facing operations, for example, on a gluing profile. the milling stop can be rotated on the machine table the machine has an extra-powerful motor with 7500 watts with pneumatic spindle locking the chips can be removed very well, with 2 extraction ports 120mm with a 30mm spindle that can be adjusted steplessly from -10 to 45°; the spindle is adjusted by handwheel with a mechanical counter. with right/left rotation we will personally deliver and demonstrate the machine anywhere in Germany for 220.00 euros; this means you have no risk when purchasing. Shipping to Austria and the rest of the EU is also possible upon request. with a large table opening that can be reduced by means of various rings; this means that milling cutters with a very large diameter can also be used, and you can also mill safely with small milling cutters (the rings are included, but they are not visible in the pictures). with 3000, 6000, 4500, 7500 and 9000 rpm the spindle height adjustment is also done by handwheel; here too, there is a very precise mechanical counter for reading the height. the table is made of highly ribbed cast iron with an interchangeable spindle (a 40mm spindle can also be used) very robust and durable design; the machine was built for the most demanding milling operations and is suitable for all milling operations. optimal power transmission through belt drive with instruction manual with 3-roller feed HOLZ HER ETX the feed has right/left rotation; the feed rollers are individually mounted and all are like new; it has 8 speeds the machine table is 1020mm wide and 980mm deep + 500mm wide extensions on the left and right the machine can be used immediately 380V, 7500W Weight: approx. 1000kg with all necessary safety devices; the machine is approved by the Holz-BG (German Wood and Furniture Employers' Accident Insurance Association). the machine weighs approx. 1000kg with motor protection switch against overload professional equipment, not cheap hardware store junk optimal, simple, fast and safe handling

Condition: excellent (used), Year of construction: 2020, operating hours: 1,743 h, functionality: fully functional, power: 257 kW (349.42 HP), Mobile shredder LINDNER URRACO 75. Foldable discharge conveyor, overband magnet, radio remote control. Nwsdpfx Aieydmgde Tjn Service new in February 2026.

Condition: used, Year of construction: 2020, Digital UV Coating and Finishing System MGI JETvarnish 3D Evo 75 Maximum sheet size: 1,200 × 750 mm Processable material: 135–800 g/m² Coating unit: 135–400 g/m² Suitable for coated and uncoated papers and cardboard, pre-coated as well as laminated/cashed substrates, and suitable plastic media. Coating: Varnish High-Gloss clear coat 18-liter tank Coating layer thickness: 7–232 µm Nodpszqyrrjfx Ai Tswn Digital UV coating finishing, partial and full-area coating, as well as 3D/relief coating effects. Machine is operational and available for immediate delivery. Location: Western Europe Price on request.

Condition: good (used), Year of construction: 1990, 1 x tool grinding machine Doebelie D 175 combination grinding Year of manufacture: 1990 with coolant system. + machine lamp Njdpfxexza Nxj Ai Town The machine can be inspected under power.

Condition: used, functionality: fully functional, Year of construction: 1995, operating hours: 1,041 h, load capacity: 1,200 kg, lifting height: 3,200 mm, fuel type: diesel, mast type: duplex, construction height: 2,070 mm, drive type: Diesel, Diesel forklift Load center: 500 Mast type: Duplex Transmission: Hydrostatic Nsdpfx Aez Sv Iwoi Town Condition: Ready for use and fully functional Technical condition: good Front tire type: Superelastic Rear tire type: Superelastic Description: 3rd valve

Condition: used, functionality: fully functional, Year of construction: 1989, operating hours: 3,209 h, load capacity: 1,500 kg, lifting height: 4,800 mm, free lift: 1,550 mm, fuel type: diesel, mast type: triplex, construction height: 2,080 mm, fork carriage width: 1,040 mm, fork length: 1,200 mm, empty load weight: 2,640 kg, drive type: Diesel, construction width: 1,040 mm, Diesel forklift Load center: 500 ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Transmission: Dual pedal Speed class: 15 Nwsdoz Iungopfx Ai Tsn Condition: Ready for use and fully functional Technical condition: good Front tire type: Superelastic Front tire size: 18x7-8 Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire size: 18x7-8 Rear tire condition: 80 - 100% Description: Handover with new FEM 4.004 inspection including inspection certificate. If you have any further questions, please do not hesitate to call us. In addition to this model, we have approximately 150 other forklifts in stock. Feel free to browse our website at fleischmann-foerdertechnik. We will be happy to provide you with a quote for leasing & financing, as well as delivery at favorable conditions. A trade-in of Linde equipment is also possible – even if you do not purchase a device from us. The stated operating hours were recorded as of the date of posting. Subject to prior sale, changes and errors. Without attachments, without additional hydraulics Work light in front, half cabin.

Condition: used, functionality: fully functional, Year of construction: 2001, operating hours: 2,126 h, load capacity: 2,500 kg, lifting height: 3,450 mm, free lift: 150 mm, fuel type: diesel, mast type: simplex, construction height: 2,350 mm, fork carriage width: 1,150 mm, fork length: 1,200 mm, drive type: Diesel, Diesel forklift Load center: 500 Fork width: 100 mm Fork thickness: 40 mm ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Standard Transmission: Hydrostatic/dual pedal Condition: Refurbished, no warranty Nedpoz Sfrtofx Ai Tswn Technical condition: very good Front tire type: Superelastic Front tire size: 7.00-12 Front tire condition: New Rear tire type: Superelastic Rear tire size: 6.50-10 Rear tire condition: New Description: Handover with new maintenance & new FEM 4.004 inspection incl. inspection certificate. Like-new condition / incl. all original documents / operating manual / parts list / purchase invoice etc. If you have any further questions, please do not hesitate to call us. In addition to this model, we have approximately 150 other material handling vehicles in stock. Feel free to browse our website at fleischmann-foerdertechnik. We will gladly provide you with a quote for leasing & financing as well as delivery under favorable conditions. Trade-in of Linde equipment is also possible – even without purchasing equipment from us. The stated operating hours were recorded at the time of the listing date. Subject to prior sale, changes and errors. Side shifter, integrated side shifter 3rd valve, work light rear, work light front, roof protection, windshield

Condition: used, functionality: fully functional, Year of construction: 2004, operating hours: 13,167 h, load capacity: 2,500 kg, lifting height: 4,000 mm, fuel type: diesel, mast type: telescopic, construction height: 2,580 mm, fork length: 1,200 mm, drive type: Diesel, Diesel forklift Mast type: Telescopic Condition: Ready for operation and fully functional Technical condition: Normal Front tire type: Superelastic Front tire condition: 60 - 80% Rear tire type: Superelastic Rear tire condition: 60 - 80% Side shifter, integrated 3rd valve Nwodpfxs Aat Rdo Ai Tsn

Condition: used, Year of construction: 1993, operating hours: 6,740 h, load capacity: 4,000 kg, lifting height: 4,400 mm, fuel type: diesel, construction height: 2,970 mm, gearing type: automatic, Equipment: cabin, H 40 D front loader with full cab own forklift truck from GLW Nwjdpfx Aiourpwts Tsn various repairs, always serviced Total operating hours 6,740 h Lifting height 4.4m Total height 2.97 m Subject to errors and prior sale. Price ex warehouse Riederich.

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 2,832 h, load capacity: 1,600 kg, lifting height: 3,145 mm, free lift: 1,518 mm, fuel type: diesel, mast type: duplex, construction height: 2,121 mm, fork carriage width: 980 mm, fork length: 1,150 mm, empty load weight: 2,950 kg, total length: 2,450 mm, drive type: Diesel, construction width: 1,100 mm, Diesel forklift Load center: 500 Fork width: 80 mm Fork thickness: 40 mm ISO class: FEM 2 A Mast type: Duplex Transmission: Hydrostatic Technical condition: good Front tire type: Superelastic Front tire size: 2 x 18x7-8 Front tire condition: 20 - 40% Rear tire type: Superelastic Nwodpfx Aj Adxmrji Tjn Rear tire size: 2 x 19x7-8 Rear tire condition: 40 - 60% Battery year of manufacture: 2017 Double auxiliary hydraulics, integrated side shifter, cabin with heater, full free lift, 2x work lights at the front, 1x work light at the rear.

Condition: used, functionality: fully functional, Year of construction: 2001, operating hours: 7,155 h, load capacity: 3,000 kg, lifting height: 3,950 mm, free lift: 1,160 mm, fuel type: diesel, mast type: triplex, construction height: 1,890 mm, fork carriage width: 1,150 mm, fork length: 1,100 mm, empty load weight: 5,025 kg, total length: 2,750 mm, drive type: Diesel, construction width: 1,300 mm, Diesel forklift Load center: 500 ISO class: FEM 3 A Mast type: Triplex Njdpfez H E Ihox Ai Town Transmission: Hydrostatic Technical condition: good Front tire type: Superelastic Front tire size: 2 x 23x10-12 Front tire condition: 60 - 80% Rear tire type: Superelastic Rear tire size: 2 x 200/50-10 Rear tire condition: 20 - 40% Battery year of manufacture: 2001 Additional single hydraulic circuit, integrated side shifter, single-pedal and single-lever design, semi-cab, suitable for container handling, 1 x work light at the front

Condition: good (used), functionality: fully functional, Year of construction: 1988, Profile steel shears Peddinghaus Peddycut 275, 6-way combination Immediately available ex works: Profile steel shears Peddinghaus Type Peddycut 275 Year of manufacture 1987 Pressing force 27 tons Table 400 x 250 mm Overhang 90 mm Capacity 10 mm Drive 1.5 kW Strokes/min 15 Flat steel 50 x 15 mm Angle steel 65 x 6 mm Round steel 28 mm Square steel 25 mm Blade length 175 mm Nwodpfezkg Rnsx Ai Tjn Punch stroke 24 mm Pierces 20 mm holes in 19 mm or 30 mm thick sheet metal Foot switch Bobmewfdbpsm Av Euedc Various punch dies Transport: ex works

Condition: used, functionality: fully functional, Year of construction: 2012, operating hours: 9,236 h, load capacity: 2,500 kg, lifting height: 3,450 mm, fuel type: diesel, mast type: simplex, construction height: 2,377 mm, fork carriage width: 1,080 mm, fork length: 1,200 mm, empty load weight: 3,715 kg, total length: 2,850 mm, drive type: Diesel, construction width: 1,200 mm, Diesel forklift Nedpfoz H E Afjx Ai Tswn Load center: 500 ISO class: FEM 2 A Mast type: Standard Transmission: Hydrostatic Technical condition: good Front tire type: Superelastic Front tire size: 2 x 23x9-10 Front tire condition: 60 - 80% Rear tire type: Superelastic Rear tire size: 2 x 23x9-10 Rear tire condition: 80 - 100% Battery year of manufacture: 2012 Double auxiliary hydraulics, fork positioner with side shift, dust protection, Blue Spot, 2x work lights at the front, 1x work light at the rear.