Used Sheetmetalworking Tooling Multi V Lower for sale (67,387)

Year of construction: 1994, condition: good (used), Sheetmetalworking tooling Multi V Lower tooling 75 x 75 x 3100 mm MACH-ID 4131 Type: Multi V Lower tooling 75 x 75 x 3100 mm Year: 1994 Hodjzc Iztepfx Ac Nofh Total length:3100mm Total hight:75mm Length: 3100mm Width: 75mm Height: 75mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Sheetmetalworking tooling Multi V Lower tooling 140 x 140 x 6000 mm Total length:6000mm Total hight:140 x 140mm V-size: 8 - 10 - 16 - 20 - 24 - 30 - 40mm Hfodpfx Aszc Izgec Njh Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Sheetmetalworking tooling Multi V Lower tooling 100 x 100 x 5400 mm Total length:3100mm Hjdezc Iypepfx Ac Nofh Total hight:75mm V-size: 10 - 20 - 24 - 30 - 40mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, press brake die Multi-V dies Hsdpfxeip Dayo Ac Njfh

Condition: used, axle configuration: 3 axles, first registration: 05/2008, total length: 9,480 mm, total width: 2,470 mm, suspension: air, tire size: 385/65 R 22.5, wheelbase: 7,330 mm, Year of construction: 2008, Equipment: ABS, = Additional options and accessories = - Air suspension = Further information = Axle configuration Tyre size: 385/65 R 22.5 Axle brand: SAF Brakes: drum brakes Suspension: air suspension Rear axle 1: tyre tread left: 35%; tyre tread right: 35% Rear axle 2: tyre tread left: 35%; tyre tread right: 35% Rear axle 3: tyre tread left: 35%; tyre tread right: 35% Weights Unladen weight: 5,300 kg Payload: 37,700 kg Gross vehicle weight: 43,000 kg Condition Damages: none Hfedpfx Acezb Hlzj Neh Identification Registration number: OK-97-KH

Condition: new, Die block, 80 x 80 mm with V-grooves approx. 86°, length 2500 mm Hfsdpfey Uxw Dox Ac Noh

Year of construction: 2025, condition: new, functionality: fully functional, Partial segment UKB die / lower tool system AMADA 415 mm Hjdpsyqyc Sofx Ac Nsfh V16 R2 85° V22 R2.5 85° V35 R3 85° V50 R4 85° Partial segments UKB upper tool system AMADA 415 mm, 150 mm, 35 mm, 15 mm and horn left/right 100 mm R 0.8 / 85° H 66.5 Furthermore, we offer a 835 mm die (manufacturer Eurostamp) which is structurally identical to the offered UKB dies. This die is slightly damaged, but fully functional and is offered for €70.00 if interested.

Condition: used, 12-piece die block for GEWA press brake Bending tool for press brake, lower tool Type: 0255/14 V-block size: 16 mm for 90° V-block angle: 88° Die depth: approx. 8 mm Height: 120 mm Hfsdpfx Acswbvmij Noh Max. pressure per meter: 100 t/m Die base width: 60 mm Total length: 4175 mm Segment lengths: 4 x 835 mm, 1 x 400 mm, 1 x 200 mm, 1 x 100 mm, 1 x 50 mm, 1 x 40 mm, 1 x 20 mm, 1 x 15 mm, 1 x 10 mm Weight: 110 kg Very good condition

Condition: used, axle configuration: 3 axles, first registration: 06/2008, total length: 9,480 mm, total width: 2,470 mm, suspension: air, tire size: 385/65 R 22.5, wheelbase: 7,330 mm, Year of construction: 2008, Equipment: ABS, = Additional options and equipment = - Air suspension = Further information = Axle configuration Tyre size: 385/65 R 22.5 Axle brand: SAF Brakes: Drum brakes Suspension: Air suspension Rear axle 1: tread left: 25%; tread right: 25% Rear axle 2: tread left: 25%; tread right: 25% Rear axle 3: tread left: 25%; tread right: 25% Weights Unladen weight: 5,300 kg Payload: 37,700 kg Gross vehicle weight: 43,000 kg Condition Damages: none Identification Registration number: OK-95-KH Hfodpoy Rt Ipofx Ac Nsh

Condition: used, edge dimension: 65 x 65 mm Hfjdpfebruw Eex Ac Neh length: 2600 mm weight: 70 kg

Year of construction: 2025, condition: new, functionality: fully functional, Rolleri segmented die / lower tool system AMADA: 835 mm x 2, 200 mm, 100 mm, 50 mm, 40 mm, 20 mm, 15 mm, 10 mm. V16 R2 85°, V22 R2 85°, V35 R2 85°, V50 R3 85°. Hsdpfx Ajyqyfmsc Nofh Rolleri segmented upper tool system AMADA: 455 mm, 300 mm, 150 mm, 100 mm, 50 mm, 40 mm, 20 mm, 15 mm x 2, 10 mm and left horn 100 mm + right horn 415 mm. R 0.8 / 85° H 66.5.

Condition: like new (used), Year of construction: 2024, Traverses XYZ: 625 x 450 x 400mm, 500 x 450mm diameter table, max table weight 400kg, maximum workpiece size 550mm dimeter x 450mm high, Hedpfxoyia T So Ac Nefh B axis table tilt +30°, -110°, C axis 360degrees, 18.5kW, 12000rpm, BT40, 24 pallets 120 station tool changer, Fanuc I series control, swarf conveyor,

Condition: good (used), Die block, W x H approx. 3500 x 260 x 190 mm, . Total length = 3500 mm Length of the reducers = 2600 mm . V-groove, without reducers, opening width approx. 100 mm Hodpfx Ajynhttec Njfh V-groove, with reducers, opening width approx. 150 mm, H = 220 mm . .

Condition: used, For sale are the Multivac forming and closing tools shown in the pictures. There are 2 sets. Each for a foil width of 420mm. Hfjdpfjwth Uiex Ac Noh Multivac 19.200.1240.95 6x11cmx18cm tray size. Price: 2000 eur the other is 9x11.5cmx11cm item number 105793236, price 2000 eur.

Condition: used, functionality: fully functional, Simatic Multi Panel Touch Siemens Siemens MP 277 10-inch Touch 6AV6 643-0CD01-1Ax1 Made in Germany Stock: 2 units Condition: Used Price per unit External width: approx. 330 mm Hjdpfx Ajwg Tmdoc Njfh External depth: approx. 275 mm Internal width: approx. 305 mm Internal depth: approx. 245 mm Professionally dismantled and packaged Pick-up address: Industriestraße 5 (47918 Tönisvorst) The conveyor system has been in operation until dismantling. Thanks to the excellent workmanship of the conveyor system, your material glides smoothly to its destination, even under heavy loads. Customized solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined conveyors, or telescopes for loading and unloading your goods! We would be happy to provide you with a customized quote or advise you on design or installation issues. Simply let us know your needs and local conditions. Take advantage of our many years of experience and our excellent network of specialists. We have successfully implemented projects for companies in a wide range of industries, including logistics, the pharmaceutical industry, skilled trades, and the electronics sector. Together, we will develop ways to optimize your processes and material flow cost-effectively and sustainably. We can even offer you fully automated sorting technology or additional components such as picking racks or containers.

Condition: used, operating hours: 3,596 h, mileage: 73,289 km, power: 78 kW (106.05 HP), first registration: 09/2008, overall weight: 5,000 kg, fuel type: diesel, color: orange, axle configuration: 4x4, maximum load weight: 2,180 kg, empty load weight: 2 kg, wheelbase: 2,450 mm, brakes: other, driver cabin: day cab, gearing type: mechanical, emission class: euro3, number of seats: 2, Equipment: ABS, additional headlights, all wheel drive, cabin, differential lock, power assisted steering, * German vehicle * Condition, see photos * original ONLY 73,289 km * ONLY 3,594 operating hours * Structure from premium manufacturer TRILETY, type MCK * Dirt collection unit at the rear, consisting of 2 disc brushes, each 900 mm Ø, as well as suction mouth and suction channel with wear protection coating, sweeping width approx. 2000 mm * Hydraulically driven high-performance suction fan, suction capacity approx. 11,000 m³/h, negative pressure in the container max. 1,100 mm/WS * Dirt container made of stainless steel (DIN 1.4301) with a volume of approx. 2.3 m³, 2 observation flaps (left and right). High-tip emptying with an emptying height of approx. 1,400 mm. Separate fresh water tank (stainless steel DIN 1.4301) with approx. 400l * Control panel for controlling the sweeper in the driver's cab of the vehicle * Water spray system with electric pump 12V, solenoid valves and spray nozzles on the disc brush and in the suction mouth, connection for spray hose for machine cleaning * Leaf suction hose 130 or 150 mm Ø, 3 m long, with shock tube made of sheet steel and water spray nozzle, mounted on the tailgate * Front brush can be extended hydraulically to the right, pulled with disc brush 1,000 mm Ø, including hydraulic tilt adjustment from the driver's cab and contact pressure control on the brush unit * High-pressure water pump Additional, hydraulically driven high-pressure water pump for machine cleaning, 15 l/min at max. 150 bar, including hose reel with 10 m hose and washing lance with adjustable jet * Sweeping speed 2 - 15 km/h * Emptying height 1,450 mm * Tipping hydraulics * Change system for 3-way tipping body or holding frame for attachments * All-wheel drive * 5-speed manual transmission Hfedpfx Acjvtnvhs Neh * Creep gear * ABS (anti-lock braking system) * Windscreen heating * Comfortable driver suspension seat * Driver's cab rear wall with window * Surface-mounted headlights * Rotating beacons * Wheelbase: 2,450 mm * GVW: 5,000 kg * Payload: 2,820 kg * Payload 2,180 kg If you require a new TÜV inspection, we will be happy to provide you with an offer from our partner workshops. Our offer is generally WITHOUT a new TÜV inspection, without new DGUV, without new SP, without new UVV.  You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note:  We offer and strongly recommend an inspection and testing of the goods so that the buyer does not have any false impressions about their quality and suitability. Inspections and tests are possible at any time by appointment and are expressly desired.   All information is provided without guarantee. We are not liable for errors or incorrect information in the offer. The buyer is obliged to check the condition and equipment of the goods/vehicles for themselves. Subject to changes, prior sale and errors. - .

Condition: ready for operation (used), Number of sanding units 4 St. sanding width 190 mm Sanding height max. 180 mm Control ja weight 3300 kg Dimensions (L/W/H) 2600x920x1890 mm Dust suction hood 2x180, 2x120 mm Löwer DSM 2004 Double-Sided Sanding Machine ----- 4-Belt Sander + Disc Unit (Top/Bottom) Manufacturer's Description: ----- Double-sided, four-belt, single-wood sander for sanding solid wood such as window frames, etc. Highly stable, top-quality design with innovative details. Suitable for high continuous loads, even with high material removal rates. - Sequentially arranged grinding units for roughing, fine grinding, and finishing, each from above and below 1. Belt grinding unit with heavy steel roller 2. Belt grinding unit with rubberized roller and shoe 3. Finishing unit with fiber brush (see optional equipment below) - Direct-drive grinding rollers for slip-free power transmission - Maintenance-free and wear-free CERMET-coated grinding shoes with very good thermal conductivity and absolute dimensional accuracy - External cooling of the grinding zones for cooler grinding and longer belt life - Forced pneumatically controlled grinding belt oscillation - Effective grinding dust extraction directly at the grinding rollers - Airborne dust extraction at the tension rollers - Integrated brushing and finishing unit with large grinding dust extraction - Motorized grinding thickness adjustment via precision threaded spindles and large linear ball bearing sets on hardened and ground precision shafts with dust and Dirt protection - Chip removal adjustment at the bottom via precision threaded spindle with dimension display via scale ring (0.1 mm resolution) - Sanding belt tension via pneumatic cylinder with constant tension pressure - Sanding belt change with pneumatic belt release in seconds - Sanding belt tracking adjustment during belt change - Electropneumatic compressed air monitoring - Infeed protection via contact roller for workpieces that are too thick - Workpiece transport via calibrated, non-slip and adhesive conveyor belts over heavy-duty cast iron tables with a finely planed surface and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and consistent workpiece transport Hjdpfsvu Hgbex Ac Nsfh - Geared feed motor with infinitely variable speed 4-20 m/min - All motors electrically protected - Ergonomically arranged operating elements - Digital thickness display (0.1 mm resolution) with modern magnetic tape system Technical data: ----- - Sanding belt speed 22 m/s - Sanding belt length 1800 mm - Sanding belt width 200 mm - Working width 190 mm - Sanding thickness 2-180 mm - Four brake motors for drive 5.5 kW - Feed motor 1.5 kW - Feed speed 4-20 m/min - Automatic height adjustment 0.37 kW - Two brush units with fiber brushes D 120 x 200 mm at 0.37 kW each - Extraction ports 2 x 180 mm, 2 x 120 mm - Extraction air velocity 20 m/s - Pneumatic connection 6 bar - Working height 870 mm - Length (with soft disc 2740 mm) 2600 mm - Length with control unit (with soft disc 3035 mm) 2985 mm - Width 880 mm - Height 1910 mm - Weight approx. 3300 kg - Operating voltage 400 volts, 50 Hz, 3P - CE compliant Equipped with the following special options: -----...

Condition: new, Number of sanding units 8 st. sanding width 180 (260) mm Sanding height max. 160 mm Dimensions (L/W/H) 3065x1600x1900 mm weight of the machine ca. 1500 kg LÖWER Leistomat SD ----- Automatic fine grinding machine for wood grinding (smoothing, defibering and Edge breaking) or intermediate sanding of profiled window bars. With soft disc Technology for the visible surfaces as well as automatically safe profile and Width adjustment. - 2 lamella roller units on the side, each 0.75kW, L=120mm, D=200mm 1 softisc unit Ø=200mm above 0.75kW, 1 slat roller unit L=200mm top 0.75kW, 1 soft disc unit Ø=200mm bottom 0.75kW, 1 slat roller unit L=200mm bottom 0.75kW, 2 lamella roller units on the side, each 0.75kW, L=120mm, D=200mm - Linear guidance of all grinding units Linear ball bearing sets on hardened shafts - time-controlled immersion of all lamella roller units directly above the incoming workpiece edges. By the It is possible to immerse the aggregates deeper into the profiles to be able to deliver. - Motorized workpiece thickness adjustment of the machine - variable grinding flap speed via frequency converter for adjusting the grinding intensity using frequency converters (separate for discs, surface rollers and side rollers) - Disc aggregates as soft discs with Velcro fastener for Grinding wheels (wood pulp) - Feed via three lower and one upper conveyor belts and Spring-loaded pressure rollers with infinitely variable speed 4-15m/min - Parameters that can be set using the touch panel are workpiece thickness, Workpiece width (left side units individually), immersion depth Side units, spindle speed, feed speed - Saving the parameters as machine programs in program mode - Working in automatic mode with non-contact Workpiece width detection and profile detection as well as automatic Adjustment of the sanding units to the workpiece width and the Profile shape (workpiece height is set in advance) - pneumatically clocked driven feed roller, automatic Clamping of the workpiece and feeding in after unit adjustment - Red/green indicator lights to indicate operational readiness - shortest workpiece length 380mm - Transport belt width 200mm - max. workpiece width 180mm (260mm in the envelope process) - Workpiece height 12-160mm - Suction connection 4 x 100mm and 2x80mm diameter - Sensor-controlled tool blow-off directly on the discs - Length (case) x width x height (mm): 3065x 1600 x 1900 Complete length: 4365mm (including roller conveyor with integrated workpiece width detection) - Weight: 1500kg - Operating voltage 400V, 50Hz, 3P, air connection 6 bar - CE version ----- Price of the above machine on request! ----- Special accessories with additional costs: Set of replacement slats for Leistomat SD-200 consisting of Area aggregates: 30 strips EH45 / 200 - 7 (rolls) 30 strips EH45 / 200 - 20 (rolls) Folding units: 96 strips M55 / 120 - 4 SmartFlex slat disc Ø200 solid with 30 grooves 50mm long Set of replacement slats for SmartFlex slat disc Hodpfjvnv Uhsx Ac Njfh consisting of 60 strip M35 / 50 K 180-7 p Sandpaper disc VB for soft disc D=200mm grit 220 with velor backing (Velcro), pack of 100. Sandpaper disc VB for soft disc D=200mm grit 280 with velor backing (Velcro), pack of 100. ----- Price of the above-mentioned special accessories on request! -----...

Condition: used, total length: 10,500 mm, Year of construction: 2016, load capacity: 14,000 kg, Trailer Multi-Trans VAL 30 Drive No Drive Year built 2016 Lifting weight (kg) 14,000 Hfedpfx Acsxd Edmj Noh

Condition: like new (used), total length: 4,000 mm, total width: 2,500 mm, total height: 665 mm, color: blue, Operating conditions: The trailer is designed for use on level, paved surfaces in internal company transport. The trailer components are not designed for combined operation with multiple trailers in a train. Hsdpfx Acjxrtqws Nefh Payload: 10 t at 6 km/h with evenly distributed load (surface load) on the loading area between the axles. Point or strip loads are only permissible upon prior notification. Loading area: Dimensions approx. 4000×2500 mm, loading height approx. 665 mm, loading surface covered with softwood planks, all-round edge protection. Main frame: Robust welded construction made of profile steel sections. Steering: Four-wheel kingpin steering, drawbar can be raised, removed, and swapped from front to rear. Coupling height at towing vehicle approx. 350–600 mm (other coupling heights only permissible upon prior notification), towing eye according to DIN 74054, Ø 40 mm, drawbar drop guard according to accident prevention regulations (UVV). Running gear: Both axles steered, super-elastic tyres 21×8-9 (approx. 517×186 mm), wheel hubs with tapered roller bearings and lifetime lubrication. Paintwork: Topcoat RAL 5002 ultramarine blue

Condition: excellent (used), total length: 6,000 mm, total width: 2,400 mm, total height: 670 mm, OPTIONALLY ALSO AVAILABLE WITH ROOF STRUCTURE! Operating Conditions: The trailer is designed for use on flat, paved surfaces in internal company transport. Combined Operation: The trailer components are not (without a trailer coupling) designed for combined operation with multiple trailers. Payload: 16 t at 6 km/h with evenly distributed loading (area load) of the loading platform between the axles. Point or line loads are only permitted upon notification. Loading Platform: Approx. 6000 x 2400 mm, loading height approx. 670 mm, platform covering made of softwood planks, all-round edge protection. Steering: Four-wheel stub-axle steering, drawbar tiltable, removable, and can be repositioned from front to back, coupling height at the towing vehicle approx. 320 mm (other coupling heights only permitted upon notification), towing eye according to DIN 74054, diameter 40 mm, drawbar drop protection according to UVV. Hsdpfx Acoxrtdqs Nsfh Chassis: Both axles steered, solid rubber elastic tyres approx. 425 x 300 mm, wheel hubs with tapered roller bearings and permanent grease lubrication. Paintwork: Topcoat RAL 5002 Ultramarine Blue. Optional Equipment: - 2 lashing rods made of round steel welded vertically into the outer frame on each long side - Double-acting wheel chock with holder and chain

Condition: excellent (used), total length: 6,000 mm, total width: 2,400 mm, total height: 750 mm, color: blue, Operating conditions: The industrial trailer is designed for use on level, paved surfaces in internal transport operations. Multiple trailer operation: The trailer components are not designed (without a coupling device) for combined operation with multiple trailers. Payload: The industrial trailer can carry loads up to a maximum of 25 t at 6 km/h with evenly distributed loading (surface load) between the axles. Point or line loads are only permissible upon notification. Base frame: The base frame of the industrial trailer consists of a robust welded construction made of profile steel. Loading platform: Dimensions are approx. 6000 x 2400 mm. Loading height approx. 750 mm. The platform is covered with softwood planks and bordered with all-round edge protection. Steering: Four-wheel axle pivot steering, drawbar can be raised, detached, and swapped from front to rear. Drawbar eye height at towing vehicle approx. 285 – 775 mm (other heights only possible upon notification), drawbar eye according to DIN 74054, diameter 40 mm, drawbar drop safety device according to UVV. Chassis: Both axles of the industrial trailer are steered. Solid elastic rubber tires approx. 559 x 356 mm, wheel hubs with tapered roller bearings and long-life grease lubrication. Hsdpfx Asxrtb Nec Nofh Paintwork: Finish in RAL 5002 ultramarine blue. Additional equipment: Two lashing rods made of round steel are welded vertically into the outer side frames on each longitudinal side of the industrial trailer. Rental or sale EU-wide.

Condition: excellent (used), total length: 4,100 mm, total width: 2,100 mm, total height: 560 mm, color: blue, OPTIONALLY ALSO AVAILABLE WITH ROOF STRUCTURE! Operating Conditions: The trailer is designed for use on flat, paved roadways in internal company transport operations. Payload: 6 t at 6 km/h with evenly distributed load (surface load) on the loading area between the axles. Point or line loads are only permitted upon notification. Main Frame: Robust welded construction made of profile steel sections. Loading Area: Dimensions approx. 4100 x 2100 mm, loading height approx. 560 mm, equipped with phenolic resin-coated plywood panels. Bumpers at the ends of the frame. Steering: Four-wheel pivot steering, drawbar tiltable, non-reversible, and non-removable. Drawbar automatic safety lock according to UVV regulations. Chassis: Both axles steered, wheels with solid rubber tyres approx. 425 x 150 mm, wheel hubs with tapered roller bearing and permanent grease lubrication. Paintwork: Top coat RAL 5002 ultramarine blue. Miscellaneous: Hfedpfexrtgfsx Ac Njh - Collision guards at the frame ends made of drop-shaped half-shells. - All-round anti-slip protection, approx. 25 mm high. - Side underrun protection at the height of the diagonal bar. - Pin coupling with captive bolt, bolt with spring safety, diameter 30 mm at the rear end. - Double-acting wheel chock with chain. - Two rear reflectors at the rear end. - Prepared for roof structure.

Condition: good (used), Rotary 2 large rack (1m x 1m x 2m) multi purpose oven / protein cooker. Previously used for cooking poultry meat but can be used for fish, meat, vegetables and ready meals. Can cook with steam only, steam and elevated temperature, dry roast and bake. These are the industry standard in UK ready meals factories. Hfodpemrqqdsfx Ac Noh

Condition: used, maximum load weight: 36,040 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 05/2025, next inspection (TÜV): 05/2027, Equipment: ABS, Excerpt from the equipment list. Complete equipment available upon request. Hfjdpfx Ajzc A Afoc Njh Chassis * Regular ladder frame in lightweight steel construction with continuous cross members * With extension of the chassis frame, the coupling plate is approximately 8 mm thick * Equipped with a 2-inch kingpin according to DIN 74080 / ISO 337 Suspension * Axle lift mechanism on axle 1 * Three-axle unit SAF INTRADISC * With disc brakes Ø 430 mm * ET 120 air suspension with approximately 180 mm of travel Tires * Wheels with internal sensors according to UN ECE R141 * 6 x 385/65 R 22.5 UNIROYAL TH 50 * 6 steel rims 22.5 x 11.75 * Offset approximately 120 mm (ET 120) Chassis components * Mechanical landing gear with leveling foot, approximately 24 tons lifting capacity * Single-side operation on the right side in the direction of travel. Storage compartment for: 10 side panels, folding stakes, and rear tailgate, completely closed, protected against spray water, and simultaneously serves as a side protective device. * 2 plastic toolboxes, waterproof, dimensions (internal) approximately 545 x 400 x 400 mm * Installed at the rear, 1x left and 1x right. Braking / air suspension system: EBS system 2S/2M with stability program (includes ABS/ALB function). EBS connector ISO 7638, (without connecting cables). Parking brake as spring-loaded brake, external pneumatic connections as well as external EBS diagnostic connection via ISO 7638 connector. WABCO EBS system. Air suspension system including 1 lifting and lowering valve, mounted on the left side in the direction of travel behind the axle unit. Driving position is automatically engaged. 2 tamper-proof coupling heads at the front ISO 1728. Air tanks for braking system and air supply made of steel (EN 286-2). Floor: Plate floor approximately 30 mm thick, multi-layer glued plywood. Floor sealed around the perimeter. Stake pockets for square tube inserts approximately 80 x 80 mm. Storage for max. 14 square tube inserts approximately 80 x 80 (length 1,990 mm) on the inner front wall. Front wall: Storage for max. 14 square tube inserts approximately 80 x 80 (length 1,990 mm) on the inner front wall, approximately 2,000 mm high with steel corner posts, with profiled steel sheet, screwed/riveted to the frame. 2 pairs of lashing points (permissible lashing force approximately 1,000 kg per ring) on the front wall according to EN 12640. Note: When using the front wall for load securing, suitable lashing straps must be used to secure the load, if the vehicle is operated without side panels and a rear tailgate. Rear wall: Folding rear wall approximately 600 mm made of aluminum hollow profiles with 3 tensioning bars and T-handle locks. 2 folding steps on the inside. Folding steel corner posts at the rear at the height of the side panels. Side wall: 4 pairs of folding stakes at the height of the side panels. VarioFix steel hollow-profile outer frame. 4 pairs of stake holders for folding stakes on the outer frame (evenly distributed). 24 pairs of lashing brackets in the outer frame (according to EN 12640), permissible tensile force approximately 5,000 kg per ring. Side panels: 5 pairs of folding side panels approximately 600 mm made of aluminum hollow profiles with tensioning bars. Electrical / Electronic: Light bar made of steel, arranged above the under-run protection. KÖGEL LUXIMA Premium Package, consisting of: LED license plate light, LED side marker lights and reflectors at the front, flashing LED side marker lights, Supers