Used Shima Seiki Sfj 202-T for sale (72,206)

Condition: used, Shima Seiki SFJ 202-T Flat Bed Knitting Machine with Shimatronic Control 07G. S/No. 468. Country of Origin: Japan Bwodpfx Aoznkrkjf Der Please Note: These lots are located in Burton-on-Trent, UK. Unfortunately, there are no loading facilities on-site. Dismantling and loading will be at the cost of the purchaser.

Condition: good (used), Year of construction: 2003, Swing diameter 176 mm Turning length 570 mm Diameter over cross slides 510 mm Working diameter 420 mm Travel - z 570 mm Bedpfx Aezk D E Aof Dewr Travel - x 245 mm Spindle bore 43 mm Tailstock diameter 85 mm Tailstock quill travel 120 mm Spindle speed 60-6,000 rpm Rapid traverse rate in X and Z direction 24 m/min Control system MSG-805 V Total power consumption 5.5 kW Machine weight approx. 3,400 kg Space requirement approx. 2000x1700x1800 mm Operating hours: 4,256 h

Condition: used, maximum load weight: 14,350 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 03/2010, loading space length: 6,800 mm, loading space width: 2,500 mm, loading space height: 800 mm, Int.-No.: Schwarzmüller Schwarzmüller * T 202 * Dump body for construction materials * 2-axle * SAF axles * Permissible total weight 18,000 kg Trade-ins accepted Financing available from 3.99% Errors and prior sale excepted! The information in this advertisement is a non-binding description and does not constitute guaranteed characteristics. The seller assumes no liability for typographical and data transmission errors. Listed equipment must be checked separately. All information in the advertisements is non-binding! Delivery throughout Germany upon request Bedpfxezfw Tvo Af Dswr Opening hours: Monday to Thursday from 9:00 a.m. to 5:00 p.m. Friday from 9:00 a.m. to 2:00 p.m. and by appointment!!!

Condition: good (used), Year of construction: 1990, CNC machining center Manufacturer: MORI SEIKI Type: Partner M300 A-1 Year of manufacture: 1990 Control: FANUC O-M Travel ranges: X/Y/Z: 400 x 300 x 495 mm Distance between spindle center and pallet table (Y-axis): 25 – 325 mm Distance between spindle nose and pallet table (Z-axis): 125 – 620 mm Rapid traverse: 24 m/min Feed rate up to 5 m/min Spindle: Ball screw: 36 mm diameter Feed drives FANUC AC X/Y-axis model 5, Z-axis model 10 Main spindle speed: 100 – 6000 rpm Main spindle motor: AC 5.5 kW Main spindle taper: BT 40 Pallet: Pallet size: 315 x 315 mm Pallet indexing angle: 7.5 degrees Indexing accuracy: + / - 2 sec. Repeatability: + / - 1 sec. Bwjdpjt Rg E Ssfx Af Dsr Pallet clamping force: 3,400 kg Maximum workpiece weight: 150 kg Automatic tool changer: Number of tools: 30 Tool change time: 2.5 sec. Collet clamping time: 7 sec. Maximum tool diameter: 110 mm Maximum tool length: 250 mm Maximum tool weight: 8 kg Special accessories: Work end display with alarm light Magazine for 30 tools Operating hours display Tool life monitoring Coolant system Work area lighting Weight: approx. 4,500 kg Space requirement: 1,900 x 2,300 mm 3826

Condition: like new (used), functionality: fully functional, * Mori Seiki NMV 5000 DCG. * Year: 2008. * Equipment value, including zero points, chucks, BT taper chucks, turning tool chucks, and pallets: 50,000–55,000 euros. * 5-axis continuous machining center. * High-precision Heidenhain linear guides. * Interface for connecting a pallet loader and robot. * Table with turning function. * Independent high-pressure cooling system at 40 bar. * Spindle oil cooling system. * BT 40 tool magazine. Bedpfx Ajzp Emfof Djwr * Magazine capacity: 60 tools. * Maximum tool diameter: 125 mm. * Maximum tool length: 300 mm. * Maximum tool weight: 8 kg. * Travel on the X-axis: 730 mm. * Travel on the Y-axis: 510 mm. * Travel on the Z-axis: 510 mm. * Table with turning function. * Maximum workpiece diameter in turning mode: 450 mm. * Maximum turning diameter in turning mode: 700 mm. * Mori Seiki Mapps 4 conversational control. * Spindle speed: 20,000 rpm. * Spindle motor power: 18.5 / 15 kW. * Maximum cutting torque: 135 Nm. * C-axis table: 360,000 x 0.001 * B-axis rotation: +160 / -180 * Rapid traverse X/Y/Z: 50 / 50 / 50 m/min * Renishaw tool measurement system. * Renishaw workpiece measurement system. * Automatic zero-point adjustment. * Automatic cutting power control. * Program memory: 2 MB. * Dynamic zero-point correction (up to 8 points). * Pre-check of tool availability. * Custom macro (999 variables). * Rear chip conveyor. * Tool life management (128 x 2 groups). * Electrical transformer. * Documentation, parts list, electrical diagrams, programming, and instruction manual. * Weight: 13,500 kg. * Machine is currently in operation. * Available for inspection by an authorized Mori Seiki technician. * Immediate delivery, subject to immediate sale.

Condition: ready for operation (used), Year of construction: 2011, spindle motor power: 25,000 W, spindle speed (max.): 6,000 rpm, bar diameter (max.): 65 mm, travel distance X-axis: 210 mm, travel distance Y-axis: 110 mm, swivel angle B-axis (max.): 820 °, number of axes: 12, This 12-axis MORI SEIKI NZ2000 ST3Y3 was manufactured in 2011. It features a maximum machining diameter of 200 mm and a maximum machining length of 260 mm. The machine is equipped with twin spindles and three turrets, providing efficient multi-spindle turning capabilities. If you are looking to get high-quality turning capabilities, consider the MORI SEIKI NZ2000 ST3Y3 multi-spindle turning machine we have for sale. Contact us for further details. • Working capacity: • Max machining diameter: 200 mm • Max machining length: 260 mm • Axis travel: • Z-axis: 300 / 810 mm • B-axis (two spindles): 920 mm • Spindles: • Spindle power: 22 / 25 kW • Counter spindle: Yes • Feed rates: • Rapid traverse X / Z: 30 / 50 m/min • Driven tools: • Driven-tool power: 5.5 / 7.5 kW Additional equipment Bsdpfozpxupsx Af Djwr • TOP AUTOMAZIONI bar feeder (2018) • Chip conveyor Technical Specification Counter Spindle Yes

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, turning length: 1,530 mm, turning diameter over cross slide: 280 mm, turning diameter: 280 mm, spindle speed (max.): 4,000 rpm, spindle bore: 88 mm, travel distance X-axis: 565 mm, travel distance Y-axis: 230 mm, travel distance Z-axis: 1,599 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 16 m/min, spindle nose: 8, spindle diameter: 210 mm, Equipment: documentation/manual, CNC MSG 501 MAPPS II WORKING AREA Swing over bed: mm 910 Swing over cross slide: mm 850 Maximum distance between spindle noses: mm 1.828 Maximum turning diameter: mm 280 Maximum turning length: mm 1.530 Bar capacity – Main spindle: mm 75 Bar capacity – Sub-spindle: mm 65 AXES TRAVELS Milling head X-axis travel: mm 565 Milling head Y-axis travel: mm ±115 Milling head Z-axis travel: mm 1.599 Turret X-axis travel: mm 155 Turret Z-axis travel: mm 1.479 MAIN SPINDLE Maximum spindle speed: rpm 4.000 Spindle nose: JIS A2-8 Spindle bore: mm 88 Minimum spindle indexing angle: 0.001° Spindle torque (continuous / 30 min): Nm 490 / 583 SUB-SPINDLE Maximum spindle speed: rpm 4.500 Spindle nose: JIS A2-6 Spindle bore: mm 73 Minimum spindle indexing angle: 0.001° Spindle torque (continuous / 30 min): Nm 349 / 368 MILLING HEAD Minimum B-axis indexing angle: 0.001° Maximum spindle speed: rpm 8.000 Spindle taper: Capto C6 Tool magazine capacity: 40 tools Maximum tool diameter (without adjacent tool): mm 90 (125) Maximum tool length: mm 400 Maximum tool weight: kg 8 TOOL TURRET Number of tool stations: 12 tools Tool shank size: mm 25 Maximum boring bar diameter: mm 40 Driven tools speed range: rpm 4,000 FEED RATES Rapid traverse X-axis: mm/min 24,000 Rapid traverse Y-axis: mm/min 16.000 Rapid traverse Z-axis: mm/min 24.000 Rapid traverse B-axis: min⁻¹ 27 Rapid traverse C-axis: min⁻¹ 300 Rapid traverse turret X-axis: mm/min 20.000 Rapid traverse turret Z-axis: mm/min 24.000 MACHINE DIMENSIONS Machine height: mm 2.735 Floor space required: mm 5.130 × 3.194 Machine weight: kg 14.800 Machine equipped with: Bsdpfx Afszpybqo Dewr • Set of static and driven tool holders • Several Capto C6 tool holders • Ø 210 mm manual three-jaw chuck for the main spindle • Ø 210 mm manual three-jaw chuck for the sub-spindle • Instruction manuals and CE Declaration of Conformity

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, X-axis travel: 140 mm Y-axis travel: +/- 40 mm Z-axis travel (1+2): 450 / 410 mm Turning length: 750 mm Turning diameter over cross slide: 250 mm Turning diameter: 190 mm Distance between centres: 750 mm Bwedpfsyyupmex Af Dsr Max. bar diameter: 52 mm Spindle speed (max.): 4,000 rpm Main spindle speed range: 60 - 6,000 rpm Drive power - main spindle: 22 / 18.5 kW Max. torque: 198 Nm Counter spindle B-axis travel: 525 mm Feeds Feed rate X (1+2): 18,000 mm/min Feed rate Y: 6,000 mm/min Feed rate Z (1+2): 24,000 mm/min Feed rate B: 24,000 mm/min Number of turrets: 2 Number of tool stations: 2x 16 pos. Shank height for square tool: 20 mm Shank diameter for drills: 25 mm Turret indexing time: 0.2 s Tool holder: VDI 30 Speed range - driven tool stations (max.): 6,000 rpm Drive power - driven tool stations: 5.5 / 3.7 / 2.2 kW Rapid traverse X (1+2): 18 m/min Rapid traverse Y: 6 m/min Rapid traverse Z (1+2): 24 m/min Rapid traverse B: 24 m/min Rapid traverse C: 400 rpm MACHINE DETAILS Control: MSX 501 Fanuc drives Machine is in excellent condition

Condition: used, Year of construction: 2012, turning diameter 370 mm turning length 424 mm control MSX-711-IV Mori Seiki swing diameter 370 mm Bwodpfxjznnc Hs Af Dsr X1- Axis 380 mm X2- Axis 155 mm Z1- Axis 460+155 mm Z2- Axis 610 mm y-axis +/- 105 mm B - axis +/- 120 ° bar material dia. 65 mm speed spindle max. S1 5.000 / S2 6.000 U/min. spindle bore S1/S2 65/38 mm 12000 1/min tool taper Capto C5 toolpiece magazine: chain magazine 76 Stück total power requirement 45 kW weight of the machine ca. 10,5 t dimensions of the machine ca. 2,71 x 2,43 x 2,40 m MAPPS control system Renishaw HPRA (manual tool presetter) Blum Laser Control Direct measuring system X;Y;Z;B Collet chuck SMW Autoblok KSZ-MB-040-Z140 Workpiece conveyor belt Bar feeder Breuning Irco ILS-RBK-10012 Knoll band filter KF10/500 / IKZ with milling spindle 7 stages up to 70 bar Chip conveyor ConSep 2000

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, turning length: 920 mm, turning diameter: 400 mm, spindle speed (max.): 12,000 rpm, spindle bore: 65 mm, travel distance X-axis: 920 mm, rapid traverse Z-axis: 80 m/min, controller manufacturer: FANUC, controller model: 18iB, fuel: electricity, number of slots in tool magazine: 40, Equipment: chip conveyor, Mori Seiki Mod. MT 1500 SX 9-axis milling and turning machining center, manufactured in 2006, with Fanuc Series 18iB (MSX-501) control, maximum length between chucks of 920mm, maximum diameter of 400mm, bore of 65mm, spindle speeds of 4000 and 6000 rpm for chucks and 12,000 rpm for milling. 12-position turret with motorized tools, Y-axis, B-axis +/- 120, C-axis 0.001, ATC 40 tools and chip extractor. In excellent working order and can be seen working in Portugal. Bodpfx Aeh Elp Ejf Dewr

Condition: good (used), Year of construction: 2005, The machine is in good working condition; testing is possible upon prior arrangement. SPACESAVER SS 2101. Fanuc MSX-850 control system. Bodpfx Afsznl Nqe Djwr

Year of construction: 2008, condition: ready for operation (used), A Mori Seiki CNC turning and milling center with counter spindle including automation is available. Tool turrets: 3, tool stations: 3×16, live tools: all stations, X-axis travel: 210mm, Z1/Z2/Z3-axis travel: 300mm/810mm/300mm, main spindle bore: 55mm, spindle speed: 6000rpm, automation robot: LR Mate 200iC 5L, payload: 5kg, reach: 892mm, repeatability: 0.03mm. Machine dimensions X/Y/Z: approx. 3800mm/2700mm/2500mm, weight: approx. 8900kg, control: Fanuc 31i-A, power-on hours: 101035h, operating hours: 68322h, process hours: 34697h. Including an automated CO2 fire detection system, transformer, machine extraction system, 4× workpiece carriers and an automatic diameter detection system. Documentation available. An on-site inspection is possible. Bwjdpfxjzlt Sbj Af Der

Year of construction: 2008, condition: ready for operation (used), A Mori Seiki CNC turning and milling center with counter spindle including automation is available. Tool turrets: 3, tool stations: 3×16, live tools: all stations, X-axis travel: 210mm, Z1/Z2/Z3-axis travel: 300mm/810mm/300mm, main spindle bore: 55mm, spindle speed: 6000rpm, automation robot: LR Mate 200iC 5L, payload: 5kg, reach: 892mm, repeatability: 0.03mm. Machine dimensions X/Y/Z: approx. 3800mm/2700mm/2500mm, weight: approx. 8900kg, control: Fanuc 31i-A, power-on hours: 101035h, operating hours: 68322h, process hours: 34697h. Including an automated CO2 fire detection system, transformer, machine extraction system, 4× workpiece carriers and an automatic diameter detection system. Documentation available. An on-site inspection is possible. Bwjdpfx Aezlt R Dsf Der

Condition: ready for operation (used), Year of construction: 2005, operating hours: 11,026 h, spindle motor power: 18,500 W, spindle speed (max.): 5,000 rpm, travel distance X-axis: 140 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 700 mm, total height: 2,058 mm, total width: 2,066 mm, overall weight: 6,600 kg, product length (max.): 3,702 mm, number of slots in tool magazine: 12, number of axes: 5, This 5-axis MORI SEIKI ZT1500YB was manufactured in 2005. It features a maximum turning diameter of 190 mm and a maximum turning length of 235 mm. The machine includes a robust turret with 12 stations and a rapid traverse speed of up to 24,000 mm/min. If you are looking to get high-quality turning capabilities, consider the MORI SEIKI ZT1500YB horizontal turning machine we have for sale. Contact us for further details. - Head 1 Operating Time: 36,316 h- Head 1 Machining Time: 18,301 h- Head 2 Operating Time: 36,324 h- Head 2 Machining Time: 11,026 h- Turret Type: 12 stations [16 stations optional]- Number of Tools in Turret: 12 [16]- Shank Height for Square Tool: 20 mm- Shank Diameter for Boring Bar: 25 mm- Driven Tool Spindle 1 & 2 Speed: 6,000 rpm- Driven Tool Spindle 1 & 2 Capacity: Drill max. 13 mm diameter, Thread max. M12- Rapid Traverse Speed: X1, X2: 18,000 mm/min; Z1, Z2: 24,000 mm/min; Y: 6,000 mm/min; B: 24,000 mm/min- Jog Feedrate: X, Z, B: 0-1260 mm/min- Spindle Motor 1 & 2 (30 min / continuous): 22 / 18.5 kW- Driven Tool Drive Motor Spindle 1 & 2 (5 min / 15 min / continuous): 5.5 / 3.7 / 2.2 kW- Axis Motors: X1: 3 kW; X2: 2.5 kW; Z2: 3 kW; Y: 1.6 kW; B: 3 kW- Hydraulic Pump Motor: 0.75 kW- Lubricant Pump Motor: 0.02 kW- Coolant Pump Motor: 0.6 kW x 2, 1.2 kW x 1- Cooling Oil Pump Motor: Compressor: 0.65 kW; Lubricating pump: 0.4 kW; Blower: 0.045 kW- Required Power Supply: 63.37 kVA- Compressed Air Supply: 0.5 MPa, 100 L/min - Max. Workpiece Swing Diameter: 310 mm - Max. Distance Between Spindle Noses: 1000 mm- Max. Turning Diameter: 190 mm- Max. Turning Length: 235 mm- Standard Turning Diameter: 170 mm- Max. Bar Capacity: 65 mm- X-Axis Travel (Nr. 1 & Nr. 2): 140 mm- Z-Axis Travel: Z1: 700 mm, Z2: 690 mm- Y-Axis Travel: ±50 mm- Spindle 2 Travel (B-Axis): 775 mm- Number of Spindle Speed Ranges: 1 step- Spindle Nose (Spindle 1 & 2): JIS A2-6- Spindle Speed Range (Spindle 1 & 2): 50-5000 rpm- Spindle Bore (Spindle 1 & 2): 73 mm- Min. Spindle Indexing Angle: 0.001° - Spindle Bearing Inner Diameter: 120 mm- Chuck (Spindle 1 & 2): 8" power chuck & hollow clamping chuck- Hydraulic Oil Tank Capacity: 10 L- Lubricant Tank Capacity: 6 L- Coolant Tank Capacity: 285 L- Oil Cooler Tank Capacity: 12 L- Floor Space (without chip conveyor): 3702 x 2066 mm- Voltage: AC 200 V- Phase: 3 Phase- Frequency: 50 Hz- Full Load Current: 182 A- Spindle Motor Current Rating: 122 A- Interrupting Capacity: 5 kA- Rated Power: 63 kVA Bwodpfxezk Ev Nj Af Dor Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: used, Year of construction: 2011, Technical details: standard turning dia.: 200 turning length: max. 810 mm control: MSX-701 MAPPS IV greates pass round over bed: 800 mm Max. distance between centres: 1130 mm max. turning diameter: 320 mm max. workpiecediameter: 300 mm bar material dia.: 65 mm Traverse X-Axis 1: 210 Traverse X-Axis 2: 210 mm Traverse X-Axis 3: 210 mm Traverse Y-Axis 1: 110 (+65/-45) mm Traverse Y-Axis 2: 110 (+45,/-65) mm Bwodezk U Rpepfx Af Dor Traverse Z-Axis 1: 300 mm Traverse Z-Axis 3: 300 mm Traverse Z-Axis 2: 810 mm Traverse B-Axis: 870 mm turning speed range - spindle: 5.000 1/min Number of spindle speed ranges: 2 . spindle nose: JIS A2-6 spindle bore: 73 mm spindle bearing diameter: 120 mm C-Axis: 0,001 ° turning speed range - spindle: 5.000 1/min spindle nose: JIS A2-6 spindle bore: 73 mm bar material dia. max: 65/52 mm spindle bearing diameter: 120 mm C-Axis: 0,001 ° Number of Turrets: 3 . Number of tool stations: 16 x 3=48 pos Schank height for square tool: 20 mm Diameter of boring bar: 32 mm turret changing time (4-stations): 0,18 sec Number of driven tools: 16 x 3=48 pos max. spindle speed driven tools: 6.000 U/min. Rotary tool machining ability: M16 / Ø16 . rapid traverse X-axis: 30 m/min rapid traverse Y-axis: 20 m/min rapid traverse Z-axis: 50 m/min drive capacity - spindle motor: 25 / 22 kW power capacity - driven tools: 7,5 / 5,5 kW total power requirement: 92,7 kVA weight of the machine ca.: 9,4 t dimensions of the machine ca.: 4,0 x 2,8 x 2,4 m Accerories Chip conveyor Coolantsystem C-axis in main and sub spindle part counter total counter tool setting Overhead partsgripper with conveyor belt. Spindle 1 Chuck SMW KNCS-N 210 / 52 mm Spindle 2 Collet Chuck Hainbuch Spanntop nova Kombi Axfix 65 Robot interface CNC Turning- and Milling Center MORI SEIKI NZ 2000 T3Y2 The NZ2000 T3Y has 2 spindles and 3 turrets, and 2 turrets have the Y-axis function and built-in milling motors. This not only allows synchronized machining using 3 turrets, but also achieves heavy-duty cutting and high-speed machining using rotary tools thanks to the built-in motor turrets. The robot cell has been diemanteled, it is now a stand alone machine. A bar feeder can be added. *

Condition: ready for operation (used), A defective spare parts donor of a Hitachi Seiki lathe including an IEMCA bar feeder is available. 1) CNC lathe Hitachi Seiki GT 20 S II, travel X/Z: 200mm/400mm, max. turning diameter: 210mm, max. swing diameter over bed: 380mm, max. bar diameter: 51mm, spindle bore: 59mm, speed: 5000rpm, tool stations: 10, rapid traverse: 20m/min. Machine dimensions X/Y/Z: approx. 2350mm/1950mm/1850mm, weight: approx. 4100kg. The capacitors for the power connection are defective. 2) Hydraulic bar feeder IEMCA TAL/AUTO 65/32, max. bar diameter: 65mm, max. bar length: 3200mm, machine dimensions X/Y/Z: approx. 4200mm/800mm/1200mm, weight: approx. 800kg. The lathe is sold exclusively as a defective spare parts donor. An on-site inspection is possible. Bsdpozka I Tefx Af Dowr

Condition: used, Year of construction: 2006, x-travel 800 mm y-travel 530 mm z-travel 510 mm Control MSC 504 Mori Seiki turning speeds max. 10.000 min/-1 power capacity - main spindel 15 / 11 kW tool taper SK 40 spindle bearing diameter 70 mm distance spindle /table 150 - 660 mm table surface area 1.100 x 600 mm max. table load 800 kg T-slots 6x 18 mm table height over floor 900 mm number of toolpositions 30 pos. Bedpfjx R Emwsx Af Dewr tool taper SK 40 max. tool diameter 80 mm max. tool-dia with free toolbox 125 mm max. tool length 300 mm max. tool weight 8,0 kg change-time tool to tool 1,3 sec change-time chip to chip 4,1 - max. 9,2 sec rapid traverse ( X / Y / Z ) 36 / 36 / 20 m/min feed speeds max. 6.000 mm/min Tipp feed 1 - 5.000 mm/min total power requirement 27 kVA weight of the machine ca. 6,1 t dimensions of the machine ca. 3,5 x 3,0 x 2,8 m CNC - Machiningcenter Vertical MORI SEIKI - DuraVertical 5080 -038

Condition: used, Year of construction: 2007, x-travel 800 mm y-travel 530 mm z-travel 510 mm Control MSC 504 Mori Seiki turning speeds max. 10.000 min/-1 power capacity - main spindel 15 / 11 kW tool taper SK 40 spindle bearing diameter 70 mm distance spindle /table 150 - 660 mm table surface area 1.100 x 600 mm max. table load 800 kg Bjdsx R Emqopfx Af Dswr T-slots 6x 18 mm table height over floor 900 mm number of toolpositions 30 pos. tool taper SK 40 max. tool diameter 80 mm max. tool-dia with free toolbox 125 mm max. tool length 300 mm max. tool weight 8,0 kg change-time tool to tool 1,3 sec change-time chip to chip 4,1 - max. 9,2 sec rapid traverse ( X / Y / Z ) 36 / 36 / 20 m/min feed speeds max. 6.000 mm/min Tipp feed 1 - 5.000 mm/min total power requirement 27 kVA weight of the machine ca. 6,1 t dimensions of the machine ca. 3,5 x 3,0 x 2,8 m CNC - Machiningcenter Vertical MORI SEIKI - DuraVertical 5080 -413

Condition: used, optical rotary encoder -Shaft: Ø 15 x 30 mm -Type: TS1508N67 Bodpfx Asd Hachjf Djwr -Number: 3x available -Price: per piece -Dimensions: 68/68/131 mm -Weight: 620 g

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 540 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 700 mm, controller manufacturer: SIEMENS, controller model: 840D, number of axes: 5, This 5-axis DMG Mori Seiki LaserTec 50 was manufactured in 2019. It features a Celos with Siemens 840D sl Operate control, integrated ytterbium cw fiber laser, and a compact design with a 4 m² footprint. Ideal for machining diamond tools with dimensions up to Ø 355 mm and 420 mm in length. If you are looking to get high-quality laser machining capabilities, consider the DMG Mori Seiki LaserTec 50 machine we have for sale. Contact us for more information. • Control: CELOS with Siemens 840D sl Operate; 21.5" ERGOline Control with multi-touch screen • Processes: Laser fine cutting, laser drilling, laser welding • Work capacity: Machining diamond tools up to Ø 355 mm and 420 mm in length • Axes/table: NC swivel rotary table; 5-axis transformation; high-dynamic torque motors in B and C axes • Drives: Linear drives in X/Y with acceleration > 1 g • Laser source: Integrated ytterbium CW fiber laser; 450 W QCW ytterbium fiber laser with 4,500 W pulse peak power and 450 W average power • Processing head: 80 mm focal length; collision switch • Vision: Camera through beam path for fiber laser • Construction: Solid mineral cast base • Footprint: Approx. 4 m² • Condition/usage: ~100 working hours (as new) • Notes: CNC precision laser machine with high-speed processing; highly dynamic and precise Bwsdpjyfv Tvjfx Af Djr Additional equipment • Fanuc robot automation • Keller automatic extraction system • Basement exhaust extraction system

Condition: used, Year of construction: 1996, turning diameter 320 mm turning length 1100 mm Bodpfx Ajyg Rbdof Dewr control Fanuc

Condition: excellent (used), functionality: fully functional, Fixed tool holders Machine: MORI SEIKI SL2000 Turret manufacturer: SAUTER ---- 2x→ No. 444-119 Turning Tool Holder 25 mm steel holder Fixed turning tool holder Price: on request ----- 1x→ No. 444-201 Double Turning Tool Holder for main spindle and sub spindle with 1x clamping bar for 25 mm tool steels Fixed turning tool holder Price: on request ----- 1x→ No. 444-210 Boring Bar Holder Cylindrical mount ø 32 mm second mount ø 32 mm; 57 mm to the rear Price: on request ----- 1x→ No. 444-205 Turning Holder Mount 25 mm steel holder Price: on request Bedpfoynb E Nsx Af Dowr

Condition: ready for operation (used), Year of construction: 2010, operating hours: 5,002 h, functionality: fully functional, machine/vehicle number: NT100JG0126, turning length: 424 mm, turning diameter: 370 mm, travel distance X-axis: 380 mm, bar passage: 52 mm, controller model: FANUC FS-31iA5 (MAPPS 4), TECHNICAL DETAILS Turning length: 424 mm Maximum turning diameter: 370 mm (270 mm with turret 2) Bar capacity: 52 mm Turning-milling spindle Full indexing capabilities: Yes X-axis travel: 380 mm Y-axis travel: ± 105 mm Z-axis travel: 460 + 155 mm (ATC) B-axis: ± 120º Spindle speed: 12,000 rpm Drive power: 9/5.5 kW Tool magazine Number of magazine positions: 38 Tool holder: Capto C5 Maximum tool length: 250 mm (210 mm for tools under Ø70 mm) Maximum tool diameter: 70 mm / Ø130 mm (with/without adjacent tools) Bsdpfx Ajzf H Ezof Djwr Maximum tool weight: 5 kg Lower turret X-axis travel: 155 mm Z-axis travel: 610 mm Number of tool slots: 10 Tool speed: 6,000 rpm Drive power for driven tools: 1.5/1.2 kW Main spindle Spindle speed: 6,000 rpm Drive power: 11/7.5 kW Spindle bore: 73 mm Chuck type: Hollow chuck (8") Manufacturer: KITAGAWA Spindle nose: JIS A2-5 Maximum torque: 223 Nm Counter spindle Spindle speed: 1,000 rpm B-axis: 4 fixed positions, 0º, -30º, -180º (-225º for overhang onto conveyor, if available) MACHINE DETAILS Control: FANUC FS-31iA5 (MAPPS 4) Potential rated power: 39.24 kVA Dimensions & Weight Dimensions (L x W x H): 2,705 x 2,425 x 2,385 mm Weight: 8,800 kg Operating Hours Power on: 54,061 h Spindle 1 operating hours: 9,813 h Spindle 2 operating hours: 5,002 h EQUIPMENT Chip conveyor Signal lamp High-pressure pump Air blow nozzle outside the spindle Foot switch (dual) for main and counter spindle

Condition: used, Year of construction: 2008, Technical details: standard turning dia.: 200 turning length: max. 810 mm control: MSX-701 MAPPS III greates pass round over bed: 800 mm Max. distance between centres: 1130 mm max. turning diameter: 320 mm max. workpiecediameter: 300 mm bar material dia.: 65 mm Traverse X-Axis 1: 210 Traverse X-Axis 2: 210 mm Traverse X-Axis 3: 210 mm Traverse Y-Axis 1: 110 (+65/-45) mm Traverse Y-Axis 2: 110 (+45,/-65) mm Bjdpfx Afezd Su Es Dswr Traverse Z-Axis 1: 300 mm Traverse Z-Axis 3: 300 mm Traverse Z-Axis 2: 810 mm Traverse B-Axis: 870 mm turning speed range - spindle: 5.000 1/min Number of spindle speed ranges: 2 . spindle nose: JIS A2-6 spindle bore: 73 mm spindle bearing diameter: 120 mm C-Axis: 0,001 ° turning speed range - spindle: 5.000 1/min spindle nose: JIS A2-6 spindle bore: 73 mm bar material dia. max: 65/52 mm spindle bearing diameter: 120 mm C-Axis: 0,001 ° Number of Turrets: 3 . Number of tool stations: 16 x 3=48 pos Schank height for square tool: 20 mm Diameter of boring bar: 32 mm turret changing time (4-stations): 0,18 sec Number of driven tools: 16 x 3=48 pos max. spindle speed driven tools: 6.000 U/min. Rotary tool machining ability: M16 / Ø16 . rapid traverse X-axis: 30 m/min rapid traverse Y-axis: 20 m/min rapid traverse Z-axis: 50 m/min drive capacity - spindle motor: 25 / 22 kW power capacity - driven tools: 7,5 / 5,5 kW total power requirement: 92,7 kVA weight of the machine ca.: 9,4 t dimensions of the machine ca.: 4,0 x 2,8 x 2,4 m Accerories Chip conveyor Coolantsystem C-axis in main and sub spindle Y-axis 2 x part counter total counter tool setting Overhead partsgripper with conveyor belt. Spindle 1 Chuck SMW KNCS-N 210 / 52 mm Spindle 2 Collet Chuck Hainbuch Spanntop nova Kombi Axfix 65 Robot interface Lehmann Robot with parts belt for feeding and disposal CNC Turning- and Milling Center MORI SEIKI NZ 2000 T3Y2 The NZ2000 T3Y has 2 spindles and 3 turrets, and 2 turrets have the Y-axis function and built-in milling motors. This not only allows synchronized machining using 3 turrets, but also achieves heavy-duty cutting and high-speed machining using rotary tools thanks to the built-in motor turrets. For shaft parts loading and unloading there is a Lehmann Robot with conveyor belts for loading and unloading. The machine can also be sold without robot. *

Condition: good (used), Year of construction: 2010, operating hours: 5,750 h, functionality: fully functional, turning length: 393 mm, turning diameter: 200 mm, spindle bore: 51 mm, MSX 853 cnc control 3-jaw chuck diameter 210mm 12-fold revolver Bwsdpfszd S S Rjx Af Dor C-axis driven tools tail stock coolant device chip conveyor Technische Daten: / technical details Drehdurchmesser / turning diameter 200 mm Drehlänge / turning lenght 393 mm X-Weg / X-travel 160 mm Z-Weg / Z-travel 450 mm max. Drehzahl Spindel / max. spindle speed 50-3000 UpM /rpm Eilgang X/Z / rapid feed X/Z 24/30 Anzahl der Revolverplätze / number of tool places 12 max. Stangendurchmesser / max. bar diameter 51 mm Antriebsleistung Spindel / drive capacity spindle 13,5 kW Gewicht ca. / weight ca. 3500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.