Used Single Temperiertechnik Gmbh Chill Advanced C-25-L for sale (118,298)

Condition: new, *Technical specification: -air-cooled, 25.5 kW referred to +10°C flow temperature at an ambient temperature of +32°C. -temperature range flow: +5°C to +30°C (optionally lower temperatures down to -5°C possible) -air flow rate: 8,000 m³/h -max. air inlet temperature: +30°C -Optionally with heating capacity up to 24kW *Pumps: -Delivery capacity up to 150 ltr/ min. -Delivery pressure up to max. 4 or 7 bar -Motor output 1.1 or 2.2 kW *Dimensions: -L/W/H: 1,450 mm x 750 mm x 1,680 mm -empty weight: approx. 480 kg -Circulation medium connection: DN 32 IG *Details & Highlights: -Internal refrigerant: R 123 a -Power supply: 380-425V/ 50Hz -Regulation and control unit SBC-T -Setpoint and actual value display, alarm display -Fully hermetic reciprocating compressor -Refrigerant receiver with safety valve according to DIN EN 378 -capacity control -frost protection monitoring -Flow monitoring -grid cover over condenser -oil sump heater -drainage device -Level monitoring by magnetic float switch -installed dirt trap in the return line in the circulating medium -overflow valve between flow and return as pump protection, fixed setting -high and low pressure limiter according to DIN EN 378 -stainless steel tank, capacity: 80 litres, open system completely insulated Self-supporting housing with castors, mobile -system for indoor installation Pgjdpfx Ajg Ewwrjirot -control box IP 54 Other performance classes are available on request. Visit our homepage for further details. *This unit conforms to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: good (used), Year of construction: 2016, power: 18 kW (24.47 HP), Single Advanced Oil D2-180-18-0 – Oil Temperature Control Unit Manufacturer: Single Temperiertechnik GmbH Model: Advanced Oil D2-180-18-0 Pgodpfx Aoyrncieirjt Year of manufacture: 2016 Heating capacity: 18 kW Specific heating output: 23.2 kVA Rated current: 32 A Supply voltage: 3×400 V / N / PE Frequency: 50 Hz Max. temperature: 180°C Max. operating pressure: 3.1 bar Safety valve: 6.0 bar Medium: heat transfer oil Max. external filling quantity: 22 litres Net weight: 169 kg Dimensions: standard design (according to unit type) Application: temperature control for industrial processes, tooling, plant modules Location: Schierling

Condition: like new (used), Year of construction: 2014, functionality: fully functional, GHD Georg Hartmann Maschinenbau GmbH, SELECTRA 25, 2014, good condition. Capacity: Up to 3000 products /h Product dimensions: Length: 160 - 400 mm, Height: 50 - 150 mm Power input: 5 kW Air: 6,0 bar Pgedeylurkepfx Airjt Ready to ship

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2018, input frequency: 50 Hz, input voltage: 400 V, empty load weight: 50 kg, Tool tempering heating: 9 kW. Temperature: 150°C. Podpozab A Esfx Airegt

Condition: used, functionality: fully functional, Year of construction: 2012, operating hours: 15,000 h, includes 3x Brabender gravimetric dosing units includes stand includes chiller includes temperature control unit includes 1x side feed; a second LSB (lateral screw feeder) is also included, and installation is possible on each cylinder. More information available upon request. Pgjdpsz Eu S Tsfx Airst Inspection is possible in Hilpoltstein.

Year of construction: 2022, operating hours: 6,123 h, condition: used, functionality: fully functional, machine/vehicle number: 20-22-004, Like new, hardly used. Pgedpfx Aieziaqforet

Condition: repair required (used), Year of construction: 2010, operating hours: 7,700 h, functionality: not functional, machine/vehicle number: 15158-10, working range: 4,000 mm, sheet thickness (max.): 12 mm, sheet thickness steel (max.): 12 mm, CNC plasma cutting system BACH ThermoCut 2000 with pipe cutting device, TEKA dust extraction system, and plasma source. Manufacturer: BACH Maschinenfabrik GmbH Type: ThermoCut 2000 Year of construction: 2010 For sale is a used CNC plasma cutting system BACH ThermoCut 2000, including pipe cutting device, plasma source, dust extraction system, and complete piping. The system was used in our machine manufacturing company until recently and is suitable for cutting sheet metal as well as processing pipes. Technical data: Working area: 4,000 x 2,000 mm Plasma source: Thermal Dynamics Ultra-Cut 100 CNC control: myBach Pipe cutting device included Pipe diameter: min. 50 mm max. 320 mm Max. cutting thickness: Mild steel: up to 12 mm Stainless steel: up to 10 mm TEKA filter and dust extraction system included Complete dust extraction piping system included CE marking available Maintenance and condition The system was regularly maintained during its entire service life. Official maintenance by the manufacturer was last performed on August 20, 2013. After that, ongoing maintenance was carried out in-house. Filters of the TEKA dust extraction system were renewed approximately 6 months ago. Cutting torch head was renewed approximately 4 years ago. Cooling water filter is changed regularly, approximately once a year. The operating hour counter of the dust extraction system currently shows approximately 7,700 hours. Since the system was operated exclusively with the dust extraction system running, this value can be used as a good indication of the total operating time of the system. Known defect The system is currently not operational. After consultation with Voortman and Mr. Sobiech from Magma Industries, the cause is likely to be in the cooling circuit of the plasma source. According to the experts, the most likely causes of the fault are: Defective cooling water pump Defective flow sensor Leakage on the suction side of the cooling water system A final fault diagnosis has not yet been carried out. Spare parts for the installed Thermal-Dynamics plasma source are now only available to a limited extent. The machine is therefore explicitly sold as a system requiring repair or for refurbishment. Scope of delivery BACH ThermoCut 2000 CNC system Thermal Dynamics Ultra-Cut 100 plasma source Pipe cutting device TEKA filter and dust extraction system Control panel with controller Dust extraction piping Accessories according to existing equipment Special features ✅ Pipe cutting up to Ø 320 mm ✅ Complete package including dust extraction ✅ Solid industrial machine made in Germany ✅ Easy-to-disassemble gantry design ✅ Also interesting for buyers who already have a suitable plasma source Location 24161 Altenholz, Germany Price Pjdpfx Aozizkyoirsgt Negotiable €21,900 Inspection possible by appointment. Sale exclusively to commercial businesses, excluding any warranty for defects. Loading / Dismantling The system is offered exclusively for self-dismantling and self-collection. The buyer assumes full responsibility for the dismantling, loading, and removal of the machine at their own cost and risk. To assist with loading, a hall crane with a maximum lifting capacity of 10 tons is available on site. Use of the crane can be arranged in advance. Due to the size and weight of the system, we recommend an inspection before submitting an offer.

Year of construction: 2011, condition: used, functionality: unexamined, US welding system with UPS 20L - Ultrasonic generator Martin Walter MW 2000 WMI - The previously installed printer is missing - One or two air hoses are leaking Pgsdpfx Aszlnb Rjirst - A test camera is missing - Shipping is possible for an additional charge.

Condition: good (used), Year of construction: 2003, machine/vehicle number: 371, total length: 2,200 mm, total width: 1,250 mm, total height: 2,150 mm, input voltage: 400 V, power: 10 kW (13.60 HP), input frequency: 50 Hz, 1 x Weber high-speed slicer suitable for the industrial slicing of various products such as meats, sausage and cheese. Manufacturer - Weber Maschinenbau. Model - CCS-602. Serial number – 371. Date of manufacture - 2003. Knife – 460mm diameter circular knife. Speed / output – up to 600 slices / minute. Maximum product length – 1,200mm long. Product cutting thickness – 0.1mm to 50mm (depending on product). Electrical requirements – 400 V / 50 hz / 3 phase. Power – 10 kW. Air (pneumatic) requirements – 10 bar. Psdpfx Aiozvx Dksregt Overall dimensions – 2200mm long x 1250mm wide x 2150mm high.

Condition: like new (used), Year of construction: 2021, We are offering this like-new Beckhoff Automation GmbH & Co. KG C6525-1018-0050 controller, manufactured in 2021. Manufacturer: Beckhoff Automation GmbH & Co. KG Model: C6525-1018-0050 Year of manufacture: 2021 Condition: like new Category ID: 102 Type ID: 994 Pedez Dg Drspfx Airegt Type: Controller If you have any questions or require further information, please do not hesitate to send us a message or call us.

Year of construction: 2022, condition: used, functionality: fully functional, Single-Use Support Ultra-Freezer RoSS.FRDG Temperature range: +10° to -80°C Capacity: up to 300L Pgjdpfxozhuuvs Airjt Shelf system for 20L Meissner containers included Highest storage density for frozen biopharmaceuticals Easy installation and loading with frozen active ingredients Net weight: 600 kg Currently, up to 5 units are available for sale. The units are currently out of service and stored. The new price per unit was >40,000 EUR.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Manufacturer: Speidel Tank and Vessel Construction Year of manufacture: 2020 Technical specifications: Net capacity: approx. 1,250 liters Material: Stainless steel 1.4404 / AISI 316L Design: insulated (with thermal jacket/insulation jacket) Internal surface: suitable for food/pharmaceutical use Operating pressure: atmospheric (storage tank) Temperature range: suitable for temperature-controlled media Connections: hygienic clamp fittings Manway: available Bottom: conical (complete drainage) Legs: height adjustable Application: The tank is ideally suited for the storage of pharmaceutical, cosmetic, or food-grade liquids. The tank was used as a CIP vessel in a pharmaceutical facility and was operated under hygienic conditions accordingly. Typical applications include: - Intermediate storage of bulk goods - CIP feed tank - Storage of alcohol, cleaning, or disinfectant solutions - Process integration in filling lines Psdjy I Skwspfx Airjgt Construction: - Premium stainless steel construction (316L) - Insulated tank for temperature-controlled processes - Hygienic design with clamp fittings - Conical bottom for complete residue drainage - Industrial-grade build from German manufacturer Speidel Condition: - Very good condition - Used, well maintained - Immediately available FAT / Documentation: - Operation manual available - Manufacturer documentation included Scope of delivery / Documentation: - Complete stainless steel tank - Insulation jacket - Documentation / operation manual - Nameplate present Special features: - German brand quality (Speidel) - Suitable for pharmaceutical, cosmetic, and food applications - Ideal as a CIP feed or buffer tank - Compact design with high quality

Condition: new, Year of construction: 2026, operating hours: 10 h, functionality: fully functional, machine/vehicle number: Parmel_042026PA, type of input current: three-phase, total width: 2,504 mm, total length: 5,768 mm, input voltage: 400 V, feed length Y-axis: 2,500 mm, working width: 1,800 mm, total height: 1,330 mm, repeat accuracy: 0.01 mm, cutting width (max.): 1,600 mm, cutting height (max.): 50 mm, compressed air connection: 4 bar, BUFFALO Cutter – Fabric & Textile Cutting Machine Our BUFFALO Cutters are the ideal solution for the precise cutting of textiles, leather, technical fabrics, and composite materials. With state-of-the-art CNC technology, they guarantee: • Highest cutting precision for patterns, prototypes, and series production • Flexibility for different materials and formats • Efficiency through short setup times and automated processes Whether in the fashion, furniture, or automotive industry – our fabric & textile cutting machines deliver perfect results with maximum productivity. Model PC W16L25 • Single-layer cutting up to 50 mm height • Working area (W × L): 1600 mm × 2500 mm • 2 cutting heads, double cutting head, needle punch, and plotter pen holder • Tool kit: ERT, EOT, VPT (electric rotary knife, oscillating knife, punching module) • KIS (Knife Initialization System) • Vacuum pump • Air compressor • Passive roller feeder for non-elastic fabrics • Parmel Cutting Software • 12 months warranty Pedpozf Ifvsfx Airsgt We offer installation, training, spare parts, consumables, and guarantee smooth operation both during and after the warranty period.

Condition: good (used), Year of construction: 2011, machine/vehicle number: 11095150, IPG Laser GmbH used 4kW laser source with cooling unit 400-460V AC 3P/PE 50/60 Hz 30.8A year of construction 2011 DWG number: G25-16-100920-2 Pgodpfxerq D D Ej Airjt Cooling unit: LC170.01-W3.5 Year of construction 2010 3/PE - 400V 50Hz 21,8A 4pcs available

Year of construction: 2011, condition: not inspected (used), Complete gas treatment and catalytic oxidation system with heat recovery – built in 2011 On behalf of our client, we offer a high-quality industrial gas treatment and catalytic oxidation system for sale. The system was originally designed and built for the treatment of methane, hydrogen sulfide, and hydrocarbon-containing gas streams from a geothermal application. It is still fully assembled and can be inspected by appointment. The system was taken out of service in 2015 in functional condition and subsequently decommissioned professionally. All components in contact with the process medium were emptied and cleaned. Since the decommissioning, the system has neither been operated nor regularly maintained. A current functional test has not been carried out. Before recommissioning, a technical inspection and, if necessary, the modernization of individual components – in particular, the control and automation technology – are required. Technical data Manufacturer: KOPF Holding GmbH (complete system) Model: Customer-specific special system Year of construction: 2011 Process air/exhaust gas flow rate: up to 6,000 Nm³/h Methane conversion according to original design: 90% Burner output: 250 kW Waste heat utilization: up to approx. 370 kW thermal output System scope Vacuum degassing system Hydrogen sulfide absorber Vacuum compressor system Water treatment Catalytic oxidation system Catalytic reactor up to 750 °C Two-stage pre-filtration Stainless steel main heat exchanger Waste heat recovery heat exchanger Gas burner Frequency-controlled main fan Dräger gas measurement technology Siemens S7 control system with process visualization Extensive measuring, control and safety technology Documentation Extensive original documents are available for the system, including: Process description Pgjdpezr T Dkofx Airot Layout drawings Piping and instrumentation diagrams (P&IDs) Isometrics Quotation and project documentation The completeness of Ex certificates and pressure vessel documentation is currently being checked. Condition System completely assembled Taken out of service in functional condition in 2015 Components in contact with the process medium emptied and cleaned Not operated since decommissioning Sale in current condition Inspection possible by appointment The system is particularly suitable for applications in gas treatment, methane oxidation, VOC/exhaust gas purification, biogas, landfill gas or comparable industrial processes. Sale is on behalf of the client. Technical data is provided to the best of our knowledge based on the available original documents. A current functional test has not been carried out. Errors, changes and prior sale are reserved.

Year of construction: 2022, condition: like new (used), functionality: fully functional, We are presenting the almost brand-new EyeC GmbH EyeC Proofiler 1200 DT (EyeC 3023) Print Inspection & Quality Control System. HIGH CONVERSION DESCRIPTION Like New - Immediate Availability - Priced to Sell - Ready for Export Model: EyeC Proofiler 1200 DT Condition: Like New - barely used EyeC Proofiler 1200DT print inspection system in excellent condition, barely used and fully operational. This is a great opportunity to acquire a high-end inspection system at a significantly lower price. ✔ Print-to-Print & Print-to-File Comparison ✔ High-precision defect detection ✔ Suitable for pharmaceutical, packaging, and commercial printing The machine is installed and can be tested. Additional photos and videos are available upon request. 🌍 Available for export 📍 Located in Turkey ✈️ Delivery Terms: EXW Turkey – ready for export ⚠️ Serious buyers only - quick decision preferred 📧 Contact now for price discussion and details ▪️ Inspection Type: Print-to-print & Print-to-file comparison ▪️ Application: Print Inspection & quality control ▪️ Max. inspection width: approx. 1200 mm ▪️ Camera system: High-resolution line scan camera ▪️ Lighting: Integrated LED illumination system ▪️ Defect detection: Missing print, color deviation, misalignment, defects ▪️ Software: EyeC Proofiler Software (original) ▪️ Operation: PC-Controlled System ▪️ Speed: High-speed automated inspection ▪️ Industry: Pharmaceutical, packaging, commercial printing Pedpfx Aijyxfrperjgt The machine is installed and can be demonstrated upon request. If you have any questions or need further information, you can send us a message or call us. You can also reach us via email or WhatsApp.

Year of construction: 2019, condition: used, We are offering this used SM Innotech GmbH & Co.KG Incapcell 22-18 laminator, year of manufacture 2019. The system has very low operating hours, as it was used as a test machine for trial purposes. Individual software updates or other modifications can be provided according to requirements and at additional cost. The system is available for immediate delivery. Pgjdpfey Dq D Isx Airst If you have any questions or need further information, please feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, measuring range X-axis: 700 mm, measuring range Y-axis: 700 mm, measuring range Z-axis: 600 mm, Equipment: type plate available, Eclipse 7/7/6 CNC Technical specifications: Measuring range X = 700 mm, Y = 700 mm, Z = 700 mm C99 control system with BP26_SE operating panel Renishaw TP20 probing system Pgodpfx Aiez Egllorjt Equipment: Calibration sphere Probing accessories HP computer with 27" monitor Software: Calypso Basic 2017 CNC Preset module Freeform surface Upgrade to the latest version possible The machine is in excellent technical and visual condition and has very few operating hours. Available immediately.

Condition: ready for operation (used), Year of construction: 2010, RHV-C&V GmbH & Co. KG glass jar capper type: LW560 Podpfoyxgxwex Airogt serial number: 10172/4184 year of construction: 09/2010 stainless steel conveyor belt, belt width: 120 mm

Year of construction: 2018, condition: as good as new (ex-display), functionality: fully functional, We are offering this display machine SM Innotech Laminator Incapcell 35-18, year of manufacture 2018. Manufacturer: SM Innotech GmbH & Co.KG Model: Incapcell 35-18 Year of manufacture: 2018 Condition: Display machine Category ID: 33 Machine type: Laminator There are 2 units of this system available; both are new as they have never been used. Pgodpfx Aoy Druusirjt If you have any questions or require further information, please send us a message or call us.

Condition: used, Year of construction: 2006, Stamping Press Manufacturer: Schuler Pressen GmbH & Co. KG, Göppingen, Germany Type: SAL 250-1.9 Mark II Serial number: A/260156 (Machine No. 2006-260156) Year of manufacture: 2006 Press force: 2,500 kN (250 tons) Stroke rate: 80–400 strokes/min Drive power: 51 kW at 2,000 rpm Ram stroke: 30 mm Ram adjustment: 100 mm Ram lift: 75 mm Installation height (table plate to ram, ram stroke bottom, ram adjustment top): 550 mm Table dimensions: 1,950 x 1,060 mm (as per drawing) Ram face: 1,950 x 800 mm (as per drawing) Compressed air: 5.5 bar Total weight (excl. feed): 48,000 kg Control system: SYS PACO 8000 Sound-insulating enclosure (orange) Strip Feed Unit Manufacturer: Kohler Maschinenbau GmbH, Friesenheim, Germany Type: KRS 18.260/19-2000.2H-BF1 Serial number: 40 871 Year of manufacture: 2006 Connected load: 15.5 kW Supply voltage: 400 V, 50 Hz Decoiler Manufacturer: Kohler Maschinenbau GmbH, Friesenheim, Germany Model: 18 260-1000.2 Serial number: 40 466 Year of manufacture: 1984 Pgjdpfezil S Ijx Airjt Connected load: 8 kW Supply voltage: 380 V, 50 Hz

Year of construction: 2014, condition: excellent (used), functionality: fully functional, For sale is an SMD pick-and-place machine from Fritsch GmbH, model placeALL 610, equipped with a single placement head featuring laser centering. The machine is fully operational and ready for use after programming. Technical Data: Type: placeALL 610 Year of manufacture: 2014 Placement rate: 600 components/hour Component sizes: 0402 chips up to 22x22 mm (alternatively up to 32x32 mm) Laser centering: non-contact, on-the-fly Slots: 108 Feed positions: 208 for 8 mm tapes Placement table: 520 x 370 mm Placement area: 620 x 450 mm Tool: 5 x standard Additionally: Camera system: Vision System II + lighting Dispensing system: CD-05 placement tool & air blow function Frame adjustment; access for robot arm from the left Universal CAD conversion Barcode reader for ID barcode Camera attachment for LM, SM, FP systems and much more. Feeders: - 2 pcs feeder racks with 16 slots each, for tape/tube feeders, front and rear side PA610 - 1 pc feeder rack with 22 slots, for tape/tube feeders, left and right side PA610/L - 20 pcs tape feeders 8 mm, max. tape thickness 1.1 mm, max. tape height 6.0 mm, max. tape width 8.3 mm, max. roll width 17.5 mm, 1 slot each, barcode configurable - 4 pcs tape feeders 12 mm, max. tape thickness 1.4 mm, max. tape height 6.0 mm, max. tape width 12.3 mm, max. roll width 17.5 mm, 1 slot each, barcode configurable - 2 pcs tape feeders 16 mm, max. tape thickness 1.4 mm, max. tape height 13.0 mm, max. tape width 16.3 mm, max. roll width 30.5 mm, 2 slots each, barcode configurable, incl. feeder extension 908.120.007 - 1 pc tape feeder 24 mm, max. tape thickness 1.4 mm, max. tape height 13.0 mm, max. tape width 24.3 mm, max. roll width 30.5 mm, 2 slots, barcode configurable, incl. feeder extension 908.120.007 - 1 pc vibration tube feeder, processes max. 10*SO sticks, 5 slots, barcode configurable - 1 pc feeder setup station with software for setting up and creating a complete component, PC connection via RS232 (PC not included) - 1 special PA wire feeder for feeding and cutting wire pins, including placement tool - 5 pcs tape feeder TF 943 cassettes for 8 mm rolls, width 11 mm Transport and loading can be organized Europe-wide upon request for an additional fee. Prices are exclusive of VAT. Viewing available by appointment. Contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase/sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY, ETC. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or to get in touch, please visit our website. Pgsdpfxewy U Nmj Airst

Condition: used, functionality: unexamined, Ultrasonic welding system, Ecoline 20L model - Ultrasonic generator K5 2000W/20kHz - Shipping available for an additional charge. Pedszlchlspfx Airsgt

Condition: good (used), Year of construction: 2023, functionality: fully functional, type of input current: three-phase, total height: 1,200 mm, total width: 790 mm, total length: 1,200 mm, input voltage: 380 V, ground cable length: 3,000 mm, overall weight: 205 kg, warranty duration: 12 months, type of cooling: water, hose package length: 5,000 mm, input current: 16 A, laser power: 2,000 W, laser wavelength: 1,080 nm, Equipment: documentation/manual, type plate available, Handheld Laser Welding Machine AIRTECH 2kW – Top Technology for Efficient Sheet Metal Welding Demonstration Unit – Excellent Condition Discover the smart and high-performance solution for precise laser welding: the Airtech handheld laser welding system with 2,000 watts of power! Perfectly suited for demanding sheet metal fabrication – efficient, safe, and highly versatile. Highlights and Features: - Power output: 2,000 watts for superior weld quality and speed - Laser wavelength: 1080 nm, continuous operation with modulation frequency up to 20 kHz - Handheld laser welding head – ideally designed for ergonomic operation - Robust housing and intelligent internal structure for maximum durability - Touchscreen display for intuitive operation - Optional automatic multifunctional wire feeder - Safety features: three-color alarm, safety interlocks, and protection against operating errors Pgodpfx Asn Sl Dbeirjt - Cooling via separate water circuit with 13-liter tank capacity - CE-certified components according to European standards Your Benefits - Work safely thanks to comprehensive protection mechanisms and alarm systems - Flexible applications, including automatic wire feed and robot integration - Low operating costs and easy maintenance due to well-designed engineering and long-life components For more information or consultation, the Airtech team will be happy to assist you!

Condition: excellent (used), Year of construction: 2019, Laser source: Manufacturer: SYNRAD, a Novanta Company Model: FSV40SFD Type: V40 Series: firestar Year of manufacture: 2018 Pgsdjxzuimjpfx Airet