Used Single Wood Sander for sale (14,069)

Condition: used, Year of construction: 1985, used cleaned, function checked, test run, partly revised, new ball bearing Tsdpfx Akovwfaleloa manufactured by Maweg type Saturn D built in 1985 Masch.-No. 85-12-018 number of band aggregates 2 piece number of Finishaggregate 2 piece motors 4 kW sanding width ca. 150 mm sanding height ca. 150 mm belt oscillation band blow out feed speed 4 - 16 m/min. belt length ca. 1800 mm belt width ca. 200 mm height indicator  digital - mechanical Siko adjustment electrical fixed sanding pad 2-belt table height constant lateral moveable exhaust connection D 4 x 80 mm required space ca. l x w x h mm 2000 x 1200 x 2000 located in 97447 Gerolzhofen sale in current condition as seen - free on truck -

Condition: used, Year of construction: 1975, with new feed carpet, not installed second hand Make Löwer Type RSM 280 S Year of construction 1975 Machine no. 3528 Number of belt units 1 piece Engines 5.5 hp Sanding width approx. 140 / 150 mm Grinding height approx. 120 mm band oscillation tape blow-off Feed speed 6 / 11 / 16 m/min. Band length approx. 1600 mm Band width approx. 160 mm Extraction connection D 100 mm Space requirement approx. LxWxH mm 1400x1000x1600 Weight approx. 650 kg Tedpfovwgczox Akloa Storage location 97447 Gerolzhofen Handover in the current condition as seen without guarantee and guarantee - free loaded -

Condition: new, Year of construction: 2026, functionality: fully functional, power: 11 kW (14.96 HP), A triple pass rotary drum dryer is a type of industrial dryer that is used to reduce or remove moisture from a material. It gets its name from the three rotating drums through which the material passes, each with a different purpose in the drying process. This type of dryer is commonly used in the production of various bulk solids, including minerals, agricultural products, and biomass. Here are the key features and components of a triple pass rotary drum dryer: 1. Triple Pass Design: - The material being dried passes through three rotating drums or cylinders, hence the term "triple pass." Each drum serves a specific purpose in the drying process. 2. Material Flow: - The material enters the dryer and first passes through the innermost drum. After the initial drying phase, it moves to the middle drum and then to the outer drum, undergoing additional drying in each pass. 3. Heat Source: - Heat is typically provided by a combustion system, such as a burner or furnace, located at one end of the drum dryer. The hot gases generated by the combustion process flow through the rotating drums, transferring heat to the material. 4. Air Flow: - The dryer is designed to optimize air flow through the drums, ensuring efficient drying. In a triple pass design, the material and hot gases move counter-currently through the three drums, enhancing heat transfer and drying efficiency. Tedpfeq Nfuzjx Aklsa 5. Lifting Flights or Lifters: - Lifters are internal components inside the drums designed to lift and cascade the material as it rotates. This movement promotes good heat transfer and uniform drying. 6. Retention Time: - The triple pass configuration allows for an extended retention time of the material in the drying system. This longer exposure to heat enhances the drying efficiency, making the triple pass rotary drum dryer suitable for materials with high moisture content. 7. Cooling Section: - After the material completes the three passes and reaches the end of the drum dryer, a cooling section may be included to reduce the temperature of the dried material before it is discharged. 8. Applications: - Triple pass rotary drum dryers are used in various industries, including agriculture (drying crops like grains), minerals (drying ores or concentrates), and biomass (drying wood chips or other organic materials). 9. Efficiency and Energy Consumption: - Triple pass rotary drum dryers are known for their high efficiency due to the extended drying time and effective heat transfer. However, they may have higher energy consumption compared to single or double pass dryers. When selecting a triple pass rotary drum dryer, it's essential to consider factors such as the type of material to be dried, required moisture reduction, and overall processing requirements. Proper design and operation are crucial to achieving optimal drying performance. Technical details We have different options for different requirements, please contact our team for more info.

Condition: used, Year of construction: 1995, Constant machine - combination station, dust brush - thickness measuring device - electronic segmented sanding pad MCS System Weber 32 mm - grooved steel calibrating roller - belt blow-off - vacuum conveyor belt. Sanding width: 1100 mm Drive: 15 kW Feed approx. 1.1 kW Height adjustment 0.25 kW Sanding belt dimensions: 1150 x 2500 mm Max. workpiece thickness: 150 mm Machine width: 1700 mm Machine length: 2000 mm Machine height: 2160 + 150 mm Machine weight: 1900 kg Constant working height: 850 mm Extraction connector: belt 180 mm / brush 120 mm Suction air volume: 0.74 m³/s Connected load: 23 kW Compressed air supply: 7 bar Feed speed: 3-15 m/min. Operating hours: 7000 h Location: Nattheim Tsdpfx Akox Twcpeloa

Condition: good (used), Year of construction: 1992, Single-piece sanding machine sanding from top and bottom electric height adjustment with digital display continuously variable feed speed star/delta starter pneumatic belt tensioning main switch sanding belt oscillation finishing brush unit top and bottom, manual height adjustment Working width: 190 mm Working height: 4 - 150 mm Min. workpiece length: approx. 280 mm Abrasive belt dimensions (L x W): 1850 x 200 mm Feed speed: 5 - 25 m/min Installed power: approx. 14 kW Extraction port diameter: 2 x 180 mm Dimensions (L x W x H): 2000 x 1000 x 2050 mm Weight: approx. 1800 kg Tjdpfjwyda Ujx Aklja Incl. infeed and outfeed roller conveyor (L = 1600 mm, non-driven) Note on used machines: • Technical data subject to errors and prior sale. • Quoted prices are ex-works – loaded free of charge! • The machines have been cleaned and function-tested. • All machines are sold as inspected, with no claims to warranty. Buyers are welcome to inspect machines at the location. • Special agreements are only valid in written form. (We answer inquiries only when your address and telephone number are provided!)

Condition: used, Year of construction: 1988, - Grinding width: 190 mm - Grinding height: 4 - 150 mm - 2 grinding units - Belt speed: 25 m/s - Feed speed: 5 - 25 m/min - Sanding belts: 1850 x 200 mm - Electrical connection: 400 V, 3/N, 50 Hz - Ex stock Tjdjymnz Uspfx Aklea

Condition: used, Year of construction: 2004, machine/vehicle number: 1609, The BACCI FC 8CN machine is an advanced device for copying, milling and grinding wooden elements, This model is equipped with 8 working heads, which allows for simultaneous performance of many machining operations. Numerical control (CNC) allows for precise machine setting and ease of programming. Thanks to this, operators can quickly adapt the machine to various tasks, which increases productivity. - Maximum machining length (X axis): 2500 mm - Unit strokes: A, B, C, D, U, V, W axis Z: 370 mm - Work table tilt angles: -10°, 0°, 10° - Maximum vertical spindle stroke: 20 mm - Spindle diameter: 40 mm Maximum tool size: - Diameter x Height: 160 x 180 mm - Sandpaper dimensions (L x W): 2360–2400 x 180 mm Spindle speeds: Tsdewptnyspfx Aklja - Spindles 1-A and 2-B: 8500 rpm - Spindles 3-C, 4-D, 5-U, 6-V, 7-W, 8-Z: 500–8500 rpm Aggregates: - Milling units (1-8): with 15 HP motors Power and air requirements: - Total installed power: 120 kW - Air pressure: 6 bar Machining capabilities: - Maximum machining length (with standard roundings): 250 mm - Maximum machining width (with roundings): 500 mm - Maximum machining height: 180 mm Speeds and acceleration: - Maximum table feed speed: 30 m/min - Maximum table return speed: 100 m/min - Maximum unit acceleration: 5 m/sec Additional functions: - Control system: OSAI - Machine weight: approx. 8500 kg - Windows 2000 Professional - machine cabinet (housing) Dismantling on the Buyer's side The price given is a net price

Year of construction: 2011, operating hours: 34,000 h, condition: used, functionality: fully functional, We have one dual temperature control unit from Single for sale. The original purchase price was approximately €5,100. Medium: Water Reinforced pump Tedozbx Rpspfx Akloa Heating capacity: 9 kW per unit Cooling capacity: 20 kW per unit Mobile Interface: 20 mA PT 100 sensor Flow measurement Alarm

Condition: used, 1 water chiller, model SINGLE STW150/1-3-10-HK 400 V, 5.7 A, 50 Hz, self-disassembly Color: as shown in the pictures, according to the images and inspection Tedezqck Rspfx Aklsa Dimensions L/W/H: 300x92x100 cm Condition: used

Condition: good (used), Engine: 18.5 kW Todpfx Akexhb Uvsloa Cutting dimensions Max log diameter: 95 cm Clearance between rollers: 73 cm Max cutting width (cant): 64 cm Max cutting height above blade: 39 cm Max cutting length: 12 m Head unit equipment Automatic cutting thickness adjustment device Head feed up/down: Electric Head feed forward/back: Electric Blade guide arm: Electric Blade tensioning system: Hydraulic with air cushion Debarking unit Sawdust extraction opening diameter: 150 mm Blade Length: 4670 mm Width: 38 mm / 50 mm Blade guide wheels Diameter: 600 mm Type: With belt Material: Cast iron Full hydraulics

Condition: new, Year of construction: 2026, Engine Electric 30 kW Electric 37 kW Electric 45 kW Cutting dimensions Max. log diameter 105 cm Max. log length 4.5 m (Bed S) 8.4 m (Bed L) Up to 12 m (non-standard) Clearance between rollers 90 cm Max. cutting width (cant) 85 cm Headstock equipment Automatic cutting thickness adjustment device (Setworks) Industrial PLC controller with automatic mode Headstock up/down feed Electric (Servo) Headstock forward/backward feed Electric Saw blade guide arm Electric (joystick controlled) Saw blade cleaning system Automatic oil mist lubrication with pneumatic assistance Saw blade tensioning system Electric hydraulic with pressure accumulator Debarker Optional Chip outlet diameter 150 mm (6") Headstock features Four cameras Board discharge system Additional options Laser Saw blade Length 6270 mm Width 50 mm 75 mm (Standard) 100 mm 120 mm Saw blade guide wheels Diameter 800 mm Type Beltless Material Convex cast iron Bed equipment Bed structure Dual-sided headstock guide system Bed features Board conveyor belt Shock-absorbing roller Additional options Tsdozqz T Repfx Aklea Saw-following conveyor Log maneuvering kit Industrial hydraulics 1 or more log clamps on two rods 1 or more bidirectional chain turners 2 or more driven leveling rollers 2 or more stops 7.5 kW or 11 kW hydraulic unit

Condition: new, Year of construction: 2026, Electric Motor 22 kW Cutting Dimensions Max. log diameter 105 cm Max. log length 6.1 m 7.9 m (with BX6 bed extension) 9.7 m (with BX12 bed extension) Min. log length 1.8 m Clearance between rollers 84 cm Max. cutting width (cant) 78 cm Max. cutting height above the blade 34 cm Max. width of clamped material 66 cm Min. width of clamped material 5 cm Max. log weight 2.5 t Head Equipment Automatic thickness setting device (Setworks) Industrial PLC controller Head feed up/down Electric (Servo) Head feed forward/backward Electric Blade guide arm Electric (joystick controlled) Blade cleaning system LubeMizer Blade tensioning system Hydraulic with air cushion Debarker Optional Chip outlet diameter 150 mm (6") Head Features Board discharge system Laser Blade Length 5000 mm Width 38 mm 50 mm (Optional) Blade guide wheels Diameter 600 mm Type With flange-pressed and brush belt Material Cast iron Bed Equipment Bed construction Single-sided head guide system Cribbing beds Standard Bed extension BX6 bed extension: 1.8 m BX12 bed extension: 3.6 m Bed Features Board conveyor belt Todpfjzqz Sgsx Aklja Shock-absorbing roller Log maneuvering kit Industrial hydraulics Center clamp with two bars 2 double-sided clamping devices (optional) 2 two-way chain log turners 2 driven leveling rollers 3 stoppers on two bars 7.5 kW hydraulic unit

Condition: as good as new (ex-display), Year of construction: 2025, warranty duration: 12 months, • 3 kW electric motor • Cutting height: 103 mm • Distance between the circular saw and the parallel guide: 800 mm Tedpfxozqz Dpo Akloa • Sliding table length: 1100 mm • Sliding table width: 350 mm • Work table length: 900 mm • Overall table width: 950 mm

Condition: as good as new (ex-display), Year of construction: 2024, warranty duration: 12 months,  Control panel  5 cutting heads  The angle of the 5th head can be adjusted within a range of 270 degrees  5 feed and pressure rollers  Adjustable feed speed: 3 – 15 m/min  4 dust extraction points  Height indicator allowing for precise adjustment of the table and machine height  Width indicator allowing for precise adjustment of the timber dimensions  Infeed table with a length of 1.9 m and outfeed table with a length of 1 m Technical data CAPACITY  Four-sided planing • Maximum width 350 mm • Height range 10 - 160 mm  Two-sided planing • Planing width 410 mm • Height range 10 - 230 mm  Single-sided planing • Maximum width 510 mm • Height 230 mm TOP HEAD Tjdpfx Aozqzy Rjkloa • Diameter 88 mm • Width 510 mm • Motor power 5.5 kW (7.5 HP) • Rotational speed 6000 rpm • Max. planing depth 8 mm • Max. profiling depth 20 mm BOTTOM HEAD • Diameter 72 mm • Width 410 mm • Motor power 4 kW (5.5 HP) • Rotational speed 6000 rpm • Max. planing depth 8 mm • Max. profiling depth 10 mm (15 mm drill) SIDE HEADS • Spindle diameter 30 mm • Max. Knife height 160 mm • Max. Diameter 160 mm • Motor power 3 kW (4 HP) • Rotational speed 6000 rpm • Max. planing depth 30 mm ADDITIONAL HEAD • Spindle diameter 30 mm • Max. Knife height 130 mm • Max. Diameter 200 mm • Motor power 3 kW (4 HP) • Rotational speed 3000, 6000, 9000 rpm • Tilt angle 270 degrees

Condition: new, Year of construction: 2025, • 3kW electric motor Tsdezqzuhjpfx Aklja • infeed and outfeed table • milling head with adjustable tilt angle up to 270° and vertical travel of 500mm and horizontal travel of 350mm • safety clamp for the sliding table • spindle diameter, standard: 30mm • max. tool diameter: 200mm • max. tool height: 130mm • guide length: 152mm • sliding table length: 1100mm • sliding table width: 350mm • overall table width: 750mm

Condition: new, Year of construction: 2026, • Two main electric motors, each with a power of 11 kW • Maximum material thickness: 250 mm • Maximum material width: 300 mm • Minimum cutting height: 10 mm • Adjustable feed rate: 5-25 m/min • Lower saw blade stroke: 10-150 • Upper saw blade stroke: 20-190 • Minimum distance between the saw blades: 15 mm • Saw blade lubrication: pneumatic sprayers • Hydraulic saw blade tensioning • Manual setting marker • Wheel diameter: 710 mm Tedpfjzqzgwjx Akloa • Outfeed table length: 2.5 m • Double pressure rollers

Condition: new, Year of construction: 2026, functionality: fully functional, • 22 kW electric main motor • Maximum material width: 550 mm • Maximum cutting width: 410 mm Tjdpfx Akezqyq Uslea • Minimum material thickness: 18 mm • Maximum material thickness: 100 mm • Minimum board length: 800 mm • Minimum cutting width: 6 cm (trimmer), 2 cm (multi-blade saw) • 5 circular saws – 4 fixed and 1 movable • Adjustable feed speed: 0-20 m/min • Complete set of two lasers • Infeed and outfeed table • Setworks device for automatic adjustment of cutting parameters

Condition: used, Woodmizer EG100 double-blade edger, in good condition, 520 mm material width, 300 mm edging width, 7.5 kW, 250 mm blade diameter, 50 mm cutting height. Tjdpszqq R Ssfx Aklja

Condition: used, Woodmizer EG250 double-blade sawmill, like new, maximum 80 operating hours, 15 kW, saw blades, continuously variable feed. Tedpfxozqqn Do Aklea

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, type of input current: three-phase, cutting length (max.): 3,600 mm, cutting width (max.): 400 mm, year of last overhaul: 2024, For sale is a complete stationary sawmill including a dust extraction system and a log infeed system! The new price for the sawing line alone was over €285,000! TECHNICAL DETAILS Cutting length (max.): 3,600 mm Cutting width (max.): 400 mm MACHINE DETAILS Type of input current: Three-phase Year of last overhaul: 2024 EQUIPMENT Log deck LD1-20LH-3SLP-002 Incline chain conveyor 517100-slp2-002 Log turner 517180-SLP2-002 Wood Mizer set works control unit with chair and joystick controls TBS01 setworks First set of vertical saws TVSSC/002/2018 Outfeed conveyor TVSEH15S-SC3.6-SD-SLP2-002 Waste chain conveyor for slab wood removal CC4-3.6H-SLP2-002 Roller conveyor CR8.3.6H-SLP2-002 Roller conveyor with centralising bed CR8-3.6H-SLP2-002 Roller conveyor with air ram stabilising arms TVSEH15S-FT3.6 Second set of vertical saws TVSEH15S-FT3.6-SLP2-002 Flat chain conveyor with stabilising arms TVSEH15S-FT3.6-SLP2-002 Waste chain conveyor for slab wood removal CC4-3.6H-SLP2-002 Horizontal saw HR700EH15S-1-SLP2-002 Roller conveyor with cross transfer chains CR6.5.4H-P-SLP2-002 Tedpfx Akozki Txelsa Transfer chain conveyer x 8 CC2-2.7H-4-P-SLP-002 Cross cut saw 00/19079 1.65-3.6 Dust extraction system with bag filter and blower unit into trailer.

Condition: used, Year of construction: 2005, functionality: fully functional, cutting length (max.): 6,500 mm, input voltage: 400 V, - Year of manufacture: 2005 - Electrical diagram - Electric motor: 15 kW - Log cutting length: up to 6.5 meters - Control: stationary control panel - Additional equipment: - Hydraulic loading - Hydraulic hold-down - Hydraulic log turner - Roller adjustment - Debarker (for removing bark prior to cutting) - Dual-function hold-down - Side stops - Leveling rollers Machine dimensions: - length: 750 cm Tsdjyrdg Depfx Aklsa - width: 220 cm - height: 240 cm - weight ~1700 kg

Condition: used, Year of construction: 2010, functionality: fully functional, type of input current: three-phase, cutting length (max.): 12,000 mm, cutting width (max.): 640 mm, saw drive: 15,000 W, input voltage: 400 V, wheel diameter: 600 mm, – Year of manufacture: 2010 TECHNICAL SPECIFICATIONS: – Motor: 15 kW Cutting dimensions: – max. log diameter: 95 cm – clearance between rollers: 73 cm – max. cutting width (square timber): 64 cm – max. cutting height above saw blade: 39 cm – max. cutting length: 12 m Saw head equipment: – automatic cutting thickness adjustment device – electric head height adjustment: up/down – electric forward/reverse head feed: infinitely variable feed speed – electric saw blade guide arm – hydraulic sawblade tension system with air cushion – debarking unit Sawblade: – length: 4670 mm – width: 38 mm - 50 mm – sawblade guide wheels diameter: 600 mm – belt type: Z – material: cast iron Todpoy Na Hvofx Akloa The sawmill is equipped with full hydraulics: – hydraulic leveling system – side stops – material clamp – comb-type log turner – 3 loading arms Machine dimensions: – length: 1520 cm – width: 235 cm – height: 240 cm

Condition: as good as new (ex-display), Segment for the LT15 Start/Classic machine Cutting length: 1.95 m Tedpfx Akjzn Natolja Bed width: 0.91 m 2 supports, 1 clamp Non-adjustable legs

Condition: as good as new (ex-display), CC2-2.7H chain conveyor with drive Length: 2.7 m Tsdpfozn I Tlsx Aklea Width: 3 m, distance between chains: 1.5 m Height: 0.89 m

Condition: as good as new (ex-display), Bed segment for the LT15 Start/Classic machine Cutting length: 2.7 m Bed width: 0.91 m Tjdpfxjzn I R Re Aklsa 2 supports, 1 clamp Adjustable legs