Used Single-Column Hydraulic Press 50 Tons, C-Frame Press, Workshop Press for sale (92,626)

Condition: used, Single-column hydraulic press MAE type S63SZ SO . 551277 Year of manufacture approx. 1977 Nominal pressing force: 63 tons Pressing force: 50 tons (practically tested) Throat depth: 320 mm Table area: 850 x 630 mm Ram area: 1050 x 500 mm Ram stroke: 500 mm Max. installation height: approx. 730 mm Table height above floor: 970 mm Hydraulic tank capacity: 600 liters Drive power: 15 kW Power supply: 380 Volt, 50 Hz - Hydraulic draw cushion below the table with bores through the tabletop - Two-hand operation - Electrical control cabinet damaged Required space (L x W x H): 2000 x 1200 x 3420 mm Nljdodzp Trspfx Akueb Weight approx. 5 tons The machine is operational, the control cabinet is mechanically damaged. During test run, the machine achieves a pressing force of 50 tons, presumably a pressure relief valve is venting.

Condition: used, Single column hydraulic press DUNKES type HZT 2,5 Machine No. H94-2558 Year of construction 1994 pressure force 2,5 ton. throat 180 mm table area 420 x 300 mm drop-through opening in table 60 x 185 mm ram surface Ø 40 mm clamping spigot bore Ø 20 mm ram stroke 160 mm Installation height max. 250 mm Rapid traverse downward 65 mm/sec. Rapid traverse upwards 160 mm/sec. Working speed 8,3 mm/sec. Table height above floor 950 mm Hydraulic operating pressure 135 bar Tank capacity hydraulics approx. 100 liters Drive power 1,5 kW Mains connection 400 Volt, 50 Hz - Installation height can be increased by shortening the piston rod by 80 mm - Pressure and travel cut-off - 2-hand operation at the machine - stroke counter - safe press control with 2 monitored hydraulic valves - UVV 11.064 VGB 7.n.5.2 (for manual insertion work) Nljdoh Uhqyspfx Akujb - 32047 read off operating hours - Electrical circuit diagram and hydraulic diagram available space requirement L x W x H 1100 x 980 x 1950 mm weight 700 kg very good condition

Condition: used, Single-column toggle press MAY - MAYPRES - KOMATSU Type MKN 1-63/6 Eccentric toggle press, eccentric press Year of manufacture approx. 1984 Pressing force 60 tons Thrust 160 mm Nledpfx Asv Uraajkujb Table size 580 x 360 mm Ram surface Ø 270 mm Clamping pin bore Ø 40 mm Distance between columns 218 mm Ram stroke 60 mm Ejector stroke 15 mm Ram adjustment travel 30 mm Max. installation height 300 mm (with intermediate table plate) Stroke rate 70 strokes per minute Motor speed 1400 rpm Motor power 3 kW Power supply 380 V, 50 Hz - Pneumatic clutch and mechanical brake with pneumatic release (separate clutch-brake combination) - Table intermediate plate L x W x H 580 x 360 x 58 mm, with holes and cutouts - Mechanical ejector, ejector device in the machine table, Ø 80 mm - Electric two-hand control and foot switch - Movable safety screen, UNIDOR protective housing with pneumatic front screen - BALLUFF cam switch Space requirement L x W x H 1400 x 1200 x 1850 mm Weight 3 tons Good condition

Condition: used, Single-column hydraulic press with draw cushion RÖCHER Type REP 100.01 SZ Hydraulic deep-drawing press Machine No. 15.499 Year of manufacture 2003 Pressing force: 100 tons Ram stroke: 500 mm Throat depth: 370 mm Installation height: 600 mm Table surface: 850 x 700 mm with a drop-through hole Ø 150 mm Ram surface: 700 x 600 mm Ram ejector force: 16 tons (160 kN) Ram ejector stroke: 100 mm Ram ejector with internal thread M24 x 1.5 mm Draw cushion force: 40 tons (400 kN) Draw cushion stroke: 200 mm Draw cushion area: 530 x 530 mm Pressure holding time: 0 to 90 sec. Table height above floor: 910 mm Hydraulic operating pressure: max. 300 bar Hydraulic tank capacity: 700 liters Approach speed (rapid traverse): approx. 400 mm/sec. Pressing speed up to 23.8 tons (238 kN): 5 to 68 mm/sec. Pressing speed up to 100 tons (1000 kN): 5 to 16 mm/sec. Return speed: 50 to 400 mm/sec. Main pump drive power: 18.5 kW Auxiliary pump drive power: 4 kW Power supply: 400 Volt, 50 Hz (63 Amps) - Operation and programming via PC 670 touch panel, keyboard and mouse Nsdpfx Akeyupuljuslb - Machine control via SIEMENS S7-300 PLC system - Ram stroke and press force programmable via control system - Draw cushion with drawing and ejector function - Draw cushion force infinitely adjustable - Ram and draw cushion equipped with direct linear measurement system - Draw cushion can be moved in and out under the press area, for punching work using the drop-through hole - Floor-level installation, draw cushion does not penetrate the floor - Pressure and stroke cutoff - Fixed stop with indirect measurement system - Pressure holding time infinitely programmable - Table with holes for the draw cushion ram rods - Ram with ejector - Knock-out damping - Stroke triggering via two-hand operation, foot switch, hand lever and push button on the control panel - LEUZE light barrier as reach-in protection for safety operation - Front mirror columns on the press table can be shifted laterally - Electrical control cabinet mounted on machine frame - Hydraulic oil cooler with fan motor (oil-air cooling) - Manual central lubrication pump - 2x hose connections for tool tempering or cooling at the ram - Piece counter in the control system - 306 read operating hours - Operating manual, hydraulic diagram, and electrical diagram available Space requirements (L x W x H): 3100 x 1800 x 4160 mm Weight: approx. 13 tons Very good condition, as new

Condition: new, Year of construction: 2026, power: 15 kW (20.39 HP), pressing force: 100 t, stroke length: 600 mm, table width: 650 mm, table length: 850 mm, throat depth: 300 mm, Equipment: CE marking, documentation/manual, safety light barrier, 100 Ton C-Frame Hydraulic Press – CHCP 100 – New / 24-Month Warranty Nlsdeyzb Dyjpfx Akuob Hydraulic presses are industrial machines that provide high force and precision for metal forming, deep drawing, cutting, and assembly operations. The CRONOSSTECH CHCP 100 C-Frame Hydraulic Press is engineered for heavy-duty manufacturing applications, featuring high tonnage capacity, a robust steel frame, and precision operation. Key Advantages - Rigid, vibration-free steel frame construction - High precision (≤120 micron/meter) - PLC-controlled, user-friendly system - PARKER / REXROTH hydraulic system - SIEMENS / SCHNEIDER electrical components - Long service life with low maintenance cost Applications - Metal forming - Deep drawing and stamping - Cutting and punching operations - Assembly and pressing applications - Automotive and supplier industry Standard Features - Steel frame stress relieved by vibration technique - PLC control and touchscreen panel - Argon welding applications - EN ISO 15614-1 / 2017 certified welding (WPQR & WPS approved) - Parallelism and perpendicularity tolerances in accordance with ISO & DIN standards (≤120 micron/meter) - PARKER or REXROTH hydraulic system - SIEMENS / SCHNEIDER electrical equipment - Automatic central lubrication system - Two-hand safety control system - Cooling system Technical Specifications – CHCP 100 Press Capacity: 100 Tons Stroke: 600 mm Throat Depth: 300 mm Table – Ram Distance: 700 mm Table Size: 650 x 850 mm Press Depth: 1300 mm Press Width: 650 mm Table Height from Floor: 900 mm Total Height: 2700 mm Main Cylinder Diameter: Ø220 mm Motor Power: 15 kW Weight: 8,500 kg General Information Country of Manufacture: Turkey Warranty: 24 Months Condition: New and unused This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, Year of construction: 2025, pressing force: 150 t, stroke length: 600 mm, table width: 800 mm, table length: 800 mm, clearance between the columns: 800 mm, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH 150/50 TON FOUR-COLUMN HYDRAULIC DEEP DRAWING PRESS General Description The CRONOSSTECH 150/50 ton four-column hydraulic deep drawing press is an industrial press solution developed for metal spinning, deep drawing, and precision pressing applications, featuring a robust four-column frame construction. The St52 grade steel construction frame undergoes stress relieving via vibration. This ensures high parallelism and vertical tolerance are maintained during prolonged operations. Ram and blank holder systems operate independently; stroke and pressure adjustments can be made precisely via the touchscreen panel. Equipped with REXROTH or PARKER hydraulic equipment, an IE3 classified motor, and PLC control, the press delivers high efficiency, reliability, and long service life. Automatic lubrication and electronic filter contamination alerts minimize maintenance requirements. With a 150/50 ton capacity, this model is an ideal solution for mass production, mold testing, and medium to heavy-duty deep drawing applications. Key Advantages - Rigid four-column press frame - Independent stroke and tonnage adjustment for ram and blank holder - Full control via touchscreen panel - High precision and repeatability - Low maintenance cost and long service life Fields of Application - Metal spinning processes - Deep drawing applications - Die testing and production processes - Auxiliary pressing operations ⚙️ STANDARD AND TECHNICAL FEATURES TYPE: Four-column FRAME MATERIAL: St52 – ERDEMIR COLUMN SHAFT DIAMETER: Ø 90 – 4 pcs, induction-hardened, chrome-plated shafts SLIDE BEARING: Bronze Zr14 CAPACITY (RAM): 150 ton CAPACITY (BLANK HOLDER): 50 ton DISTANCE BETWEEN COLUMNS: 800 × 800 mm PARALLELISM TOLERANCE: 120 micron/meter PERPENDICULARITY TOLERANCE: 60 micron/meter STROKE (RAM): 600 mm STROKE (BLANK HOLDER): 200 mm MIN. DAYLIGHT: 100 mm MAX. DAYLIGHT: 700 mm WELDING STRESS RELIEF: Vibration stress relief WELDING STANDARD: TÜRK-AK accredited WPQR & WPS – EN ISO 15614-1:2017 (EN ISO 14731) MAX. OPERATING PRESSURE: 250 Bar TOTAL MOTOR POWER: 18.5 kW – IE3 MAIN PUMP: 36 cm³ – REXROTH or PARKER MOVABLE TABLE FAST DESCENT SPEED: 150 mm/s MOVABLE TABLE DRAWING SPEED: 12 mm/s MOVABLE TABLE RETURN SPEED: 170 mm/s BLANK HOLDER FORWARD SPEED: 30 mm/s MAIN CYLINDER BORE: Ø 280 mm – Ck45 BLANK HOLDER CYLINDER BORE: Ø 160 mm – Ck45 AUXILIARY ACCELERATION CYLINDERS: 2 units APPROXIMATE PRESS HEIGHT: 3800 mm APPROXIMATE PRESS WIDTH: 1150 mm APPROXIMATE PRESS DEPTH: 1150 mm DISTANCE FROM FLOOR TO LOWER TABLE: 1200 mm PRIMARY FILLING VALVE: NG 125 HYDRAULIC UNIT: REXROTH or PARKER COOLING SYSTEM: EMMEGI – CIESSE – PARKER OFF-LINE FILTRATION: REXROTH or PARKER LUBRICATION TYPE: Automatic (adjustable from screen) RAM / BLANK HOLDER STROKE AND TONNAGE ADJUSTMENT: Adjustable from screen SYSTEM & PRESS STATUS INFORMATION: Viewable on screen DIE MEMORY: Adjustable from screen LINEAR DISPLACEMENT TRANSDUCER: NOVATECHNIK or TURCK PLC APPLICATION: DELTA TOUCHSCREEN PANEL: DELTA 7” SWITCHGEAR COMPONENTS: SIEMENS – SCHNEIDER APPROXIMATE WEIGHT: 9 ton Njdpfx Ajx N Ul Tekuelb Production Note This machine is manufactured in Turkey by CRONOSSTECH.

Condition: used, Single-column hydraulic press EXNER Type EEX 20 S - Machine no.: 1615 Year of manufacture: 1980 - Pressing force: 20 tons - Throat depth: 180 mm - Table size: 380 x 350 mm - Table opening: Ø 50 mm - Ram surface: 310 x 250 mm - Clamping shank: Ø 35 mm - Ram stroke: 100 mm - Max. installation height: 250 mm - Table height above floor: 900 mm - Descent speed: approx. 480 mm/s - Return speed: approx. 480 mm/s - Working speed: 20 mm/s - Hydraulic tank capacity: 110 liters - Hydraulic operating pressure at 20 tons: 200 bar - Motor output: 4 kW - Power connection: 400 Volt, 50 Hz - Stroke release via two-hand control or light barrier - Operating modes: setup, two-hand operation, BWS - SICK light curtain, type LVU, with single- and double-stroke settings and safety function - Rapid approach and working stroke - Stroke limitation dependent on pressure or travel Nledpfxoyz Dtdo Akusb - Mechanically adjustable solid stop - Press force adjustment manually via knurled wheel - Control cabinet mounted on the side of the machine - Operating manual and electrical schematics included - Stroke counter - Space requirement (L x W x H): 1250 x 750 x 2000 mm - Weight: 1.4 tons In good condition

Condition: used, Single-Column Eccentric Press WEINGARTEN Type EV 63 Machine No. 738 / 61 Year of manufacture: 1962 Pressing force: 63 tons Throat depth: 260 mm Table size: 630 x 530 mm Table opening: Ø 210 mm Ram area: 315 x 260 mm Adjustable ram stroke: 8–100 mm Ram adjustment: 63 mm Ram shank bore: Ø 40 mm, with clamping piece Installation height: max. 450 mm Strokes per minute: 115 spm Air requirement: min. 4.5 bar Motor power: 4 kW Electrical connection: 380 Volt, 50 Hz Table height above floor: approx. 750 to 900 mm - Electric stroke release via foot switch or two-hand control - Overload protection by shear plate - Clutch-brake combination via WEINGARTEN friction-threaded clutch with TDC safety Nsdpfsk S Htxjx Akuolb - Front crankshaft support bearing - Press table height adjustable via 2 threaded spindles - Manual central lubrication system - Free-standing electrical cabinet - UVV (accident prevention regulations) for manual loading operations Space requirements (L x W x H): 1750 x 1600 x 2430 mm Weight: 4.5 tons In good condition

Condition: used, Single-column hydraulic press HYDRAP type HPSK 25 No. 6312 Year of construction 1989 Pressure force 25 ton. Ram stroke 500 mm throat depth 300 mm Installation height 700 mm Table surface 1000 x 500 mm Table bore Ø 210 mm Plunger surface 400 x 360 mm Clamping pin bore Ø 40 mm Table height above floor 855 mm Feed speed in rapid traverse 280 mm/sec. Pressing speed 3.5 mm/sec. to 25 mm/sec. Return speed 280 mm/sec. Hydraulic tank capacity 240 liters Nsdpshrakvsfx Akuslb Drive power 7.5 kW Mains connection 400 Volt, 50 Hz. - Operation and programming via SIEMENS S5 with OP1 control system - Measuring system for stroke adjustment - Pressing speed infinitely variable via potentiometer - Pressure setting infinitely adjustable manually via pressure regulator - Short stroke device - Mechanical tool clamping on ram with T-slots and clamping pin hole - Switch cabinet with electrical control on the machine - Two-hand operation and electrical connection for foot control - Control provided for electrical mold monitoring - Hydraulic diagram and electrical diagram available Space requirement L x W x H 1800 x 1200 x 2930 mm Weight approx. 4 tons good condition

Condition: used, Single-column hydraulic press SCHÖN type FES / C 7 Machine no. No. 4281 Year of construction 1995 Pressure force 7 ton. throat 170 mm Projection round cycle station 60 mm Table size 310 x 200 mm Rotary indexing table Ø 400 mm, with 12 indexing stations Plunger surface approx. Ø 100 mm Plunger plate 315 x 200 x 35 mm Ram stroke 100 mm Installation height rotary table - ram plate max. 130 mm Table height above floor 890 mm Ram speed rapid traverse downwards approx. 300 mm/sec. Ram speed rapid traverse upwards approx. 300 mm/sec. Ram speed Working speed approx. 30 mm/sec. Drive power 1.5 kW Mains connection 380 Volt, 50 Hz Tank capacity approx. 50 liters hydraulic oil - Rotary indexing control via SIEMENS S7- 1200 - GECHTER pneumatic rotary indexing table with 12 indexing stations - Mechanically adjustable fixed stop - Adjustable pressure holding time in the UT - electrical 2- manual operation Space requirement L x W x H 1450 x 850 x 1900 mm weight 700 kg good condition Nljdjr I E Itopfx Akueb

Condition: used, Single-column hydraulic press, straightening press, punching frame ECKOLD Press frame with hydraulic cylinder, mobile press, punching unit Type RSD 1500 - 125 Machine. No. 317 / 690 Year of construction approx. 1986 Compressive force 150 ton. throat 125 mm ram stroke 35 mm Table size 280 x 210 mm Plunger surface Ø 125 mm Installation height (ram to table) max. 265 mm Table height above floor 403 mm Hydraulic operating pressure max. 500 bar - without hydraulic unit - Plunger surface with 4 M16 threads and 20 mm guide groove, central centering hole Ø 15 mm - 1 high-pressure hydraulic hose with external thread M30x1.5 mm, hose length 4 meters - 1 high-pressure hydraulic hose with union nut M30x1.5 mm, hose length 4 meters Nljdod Swtaopfx Akujb Space requirement L x W x H 700 x 300 x 1450 mm Weight 1250 kg Good condition

Condition: used, Single-column pneumatic press, hydraulic press PAUL ANTON type PVT 2 Pneumatic table press, embossing press No. 97148 Year of manufacture approx. 1980 Compressive force: 10 ton throat depth: 100 mm Ram stroke: approx. 25 mm Plunger surface: Ø 32 mm Table size: 250 x 220 mm Table opening: 53 x 53 mm Nodpfx Akjtrpiieuolb Table height: 1060 mm Installation height: 155 mm - Very stable construction - Hydro-pneumatic press with air to oil pressure ratio - Pneumatic foot switch - ram with M12 internal thread - Metal base Space requirement L x W x H 850 x 620 x 1560 mm Weight approx. 200 kg good condition

Condition: used, Single column eccentric press KRUPP type PEKRD 125 h Machine No. 2861 Year of construction 1977 pressure force 125 ton. throat 400 mm table size 950 x 750 mm ram area 800 x 540 mm table opening 100 x 250 mm stroke adjustment 8 to 160 mm ram adjustment 100 mm Nlodpfxedzqddj Akusb Installation height of largest stroke at top max. 550 mm Stroke rate 60 strokes/min. Table height above floor 800 mm Motor power 10 kW Mains connection 380 Volt, 50 Hz - Hydraulic overload in ram - Compressed air clutch-brake combination ORTLINGHAUS - ram weight balancing cylinder - motorized ram adjustment - Table plate with ball rollers - Two-hand operation - grease central lubrication HELIOS - stroke counter - UVV 7n 5.1 §4a, paragraph 2 No. 3b for manual insertion work Space requirement L x W x H 2300 x 1800 x 3200 mm weight approx. 10 ton. good condition (very little used)

Condition: used, Year of construction: 1982, Technical details: pressure: 16 t stroke: 250 mm Nlsdpfx Akeu Nfmyjueb throat: 270 mm dayligth: ca. 400 mm table surface area: 800 x 500 mm boring diameter: Ø 50 mm ram surface area: 220 x 360 mm mortise hole in ram: Ø 40 mm table height over floor: 970 mm voltage: 380 / 50 Hz V control voltage: 220 V / 50 Hz total power requirement: 3,0 kW weight of the machine ca.: 2,3 t dimension machine xH: 1,8 x 1,5 x 2,72 m Press frame in robust welded construction. Adjustment of the operating mode via switch: inching, two-hand, foot or continuous operation with feed Press has a piece counter on the side with overload protection (pressure relief valve) with cutting shock damping Light curtain SICK optical electronics (can be repaired optionally) *

Condition: used, Technical details: pressure: 40 t throat: 365 mm distance table/ram: 800 mm max. ram stroke: 500 mm ram speed - reverse: 0,45 m/sec ram speed - forward: 0,10 m/sec ram surface area: 450 x 360 x 74 mm table surface area: 630 x 500 x 73 mm Nedpfx Akou Nfuqouolb passage opening in table: Ø 205 mm table height over floor: 720 mm total power requirement: 13,0 kW weight of the machine ca.: 3,2 t dimension machine xH: 1,7 x 1,1 x 3,0 m Other technical features: -trailing time: 443ms -trailing distance: 9mm -Last machine inspection: May 2020 valid for 1 year *

Condition: used, Technical details: pressure: 0,9 t daylight dimension : table/slide up: 350 mm Njdpfx Aju Nfw Sekuolb throat: 295 mm ram diameter: 40 mm Table dimensions: 600 x 330 mm height over floor: 935 mm weight of the machine ca.: - t dimension machine xH: 1,2 x 0,8 x 2,1 m Punch holder with M24x60mm internal thread Hydraulic power unit Röhm-Gamet, type 1E1 HS299, pressure 38bar, tank capacity approx. 50 liters One-hand operation *

Condition: used, Year of construction: 2001, Technical details: pressure: 250 t throat: 360 mm distance table/ram: 800 mm max. ram stroke: 500 mm ram speed - reverse: 390 mm/sec. ram speed - forward: 450 mm/sec. hydraulic-pressure: 280 bar connected load: 43 kW Nljdpfoxna Uzjx Akueb work speed: 11....50 mm/s operating pressure: 20 MPa total power requirement: 20,5 kW weight of the machine ca.: 17 t dimension machine xH: 3,9 x 1,9 x 4,0 m

Condition: used, Technical details: pressure: 63 t distance between columns: 900 mm no. of strokes: ca. 75 Hub/min ram adjustment: 80 mm stroke adjustable from - to: 3-100 mm Table dimensions: 900 x 600 mm throat: 310 mm dayligth: max. 350 mm drive power: 11 kW Nljdpfxou Nfnko Akusb voltage: 380/220/24 V frequency: 50 Hz operating pressure: ca. 150 bar oil volume: 500 l safety distance: 150 mm passage opening in table: 200 mm total power requirement: 11 kW weight of the machine ca.: 4,0 t space requirements of the machine approx.: L:1,8 x B:1,8 x H:3,7 m DIFFERENTIAL PATH PRESS HIGH SPEED PRESS - High-speed press, C-stand - Compressed air connection: approx. 5 bar Condition. Press is not under power, without switch cabinet, sale as is. - Documentation available i.D. *

Condition: used, Technical details: pressure: 40 t distance between columns: - mm stroke: 500 mm throat: 360 mm distance table/ram: max. 800 mm daylight dimension : table/slide up: 600 mm ram stroke: 500 mm Nodpfow Smukjx Akuslb ram speed - forward: 0,100 m/s ram speed - reverse: 0,450 m/s Table dimensions: 750 x 500 mm passage inside table: 200 mm surface area of ram: 360 x 450 x 72 mm mortise hole in ram: 40 x 75 mm height over floor: 700 mm total power requirement: 13 kW weight of the machine ca.: 3,2 t dimension machine xH: 1,75 x 1,15 x 2,95 m Operation via two-hand control panel. (and one-hand operation) *

Condition: used, Technical details: pressure: 25 t stroke: 500 mm daylight dimension : table/slide up: 800 mm throat: 360 mm ram stroke: 500 mm Nodpfxjvc Awxj Akujlb ram speed - forward: 0,100 m/s ram speed - reverse: 0,45 m/s Table dimensions: 630 x 500 x 75 mm passage inside table: Ø 180 mm surface area of ram: 450 x 360 mm mortise hole in ram: Ø 32 mm height over floor: 710 mm total power requirement: 8,75 kW weight of the machine ca.: 2,2 t dimension machine xH: 1,7 x 1,1 x 2,95 m Operation via two-hand control panel. (and one-hand operation) *

Condition: used, Year of construction: 1991, Technical details: pressure: 40 t daylight dimension : table/slide up: 450 mm throat: 375 mm ram stroke: max. 300 mm Table dimensions: 900 x 500 x 85 mm passage inside table: Ø 120 mm height over floor: 900 mm total power requirement: 15,0 kW weight of the machine ca.: 5,8 t dimension machine xH: 2,3 x 1,45 x 2,40 m further technical data: -size of the ram plate W: 900 x D: 500mm -pivot hole in ram Ø 40 x 75mm -Hydraulics: tank capacity approx. 500Liter; operating pressure 275 bar; pump capacity 22,9 l/min. Nlodpfx Akju Nfp Ijujb Two-hand operation and/or control panel *

Condition: used, Year of construction: 1960, Technical details: pressure: 10 t Njdpfju Nfudjx Akujlb throat: 255 mm max. ram stroke: 400 mm ram speed - reverse: 0,180 m/sec. m/sec. ram speed - forward: 0,080 m/sec. m/sec daylight dimension : table/slide up: 630 mm daylight dimension : table/slide low: 230 mm table clamping surface:: 420 x 400 mm passage opening in table: 220 mm surface area of ram: 200 x 200 x 65 mm total power requirement: 1,6 kW weight of the machine ca.: 1,1 t dimension machine xH: 1,1 x 0,5 x 2,1 m

Condition: used, Technical details: pressure: 100 t daylight dimension : table/slide up: 800 mm throat: 360 mm ram stroke: 500 mm ram speed - forward: 200 m/s ram speed - reverse: 200 m/s Table dimensions: 750 x 560 x 90 mm Nodpfx Akevc Ax Neuslb passage inside table: Ø 26 mm clamping surface ram: BxT: 530 x 400 mm mortise hole in ram: Ø 50 mm cylinder diameter: Ø 250 mm height over floor: 720 mm total power requirement: 17,0 kW weight of the machine ca.: 5,5 t dimension machine xH: 1,8 x 1,2 x 3,2 m

Condition: like new (used), Year of construction: 2026, pressing force: 20 t, For sale is a C-frame assembly and small-series production press from the manufacturer DURENDUS with a maximum pressing force of 20 tons. The machine has a table size of 700 × 920 mm, a maximum installation height of 550 mm, and a stroke of 400 mm, making it suitable for assembly work, small-series production, pressing operations, and straightening processes in industrial applications. ##### Technical data + information: C-frame assembly and small-series production press – 20 tons – 700 × 920 mm ==== General information - Design: C-frame / single-column press - Manufacturer: DURENDUS - Pressing force: 5–20 tons (adjustable) - Maximum installation height: 550 mm - Table size: 700 × 920 mm - Press head: Ø 100 mm - Table height above the ground: 1,000 mm - Overall dimensions (W x D x H): 900 × 900 × 2,340 mm - Total weight: approx. 1,200 kg - T-slots: DIN 650 – 22 mm or according to customer requirements - Forklift pockets: available - Press area lighting: available ==== Hydraulic cylinder - Stroke: 0–400 mm (adjustable) - Cylinder diameter: Ø 110 mm - Piston rod diameter: Ø 65 mm - Maximum working pressure: 280 bar - Return speed: 50 mm/s Njdjy Sx Uwjpfx Akuolb - Working speed: 10 mm/s - Idle speed: 10 mm/s - Pressure build-up time: max. 2 sec. (steel on steel) ==== Hydraulics & drive - Hydraulic pump: ASC - Delivery rate: 24 l/min - Motor power: 3 kW - Pressure accuracy: ±5 bar - Tank volume: 60 l - Valve technology: DUPLOMATIC - Filter technology: FILTREC - Oil level monitoring: electronic - Cooling: oil-air cooling - Hydraulic unit: mounted at the top rear ==== Control system - Operation: foot pedal or hand lever - Pressure setting: via rotary control - Stroke limitation: via adjustable sensors - Selector switch: foot / hand operation - Switch cabinet components: mostly SIEMENS ==== Safety - Emergency stop switch - Stroke limitation - Stable steel construction - CE-compliant design ==== Electrical connection - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Main motor connection power: 3 kW - Total connection power: max. 5 kW ##### Application areas: Assembly work, small-series production, pressing, straightening, toolmaking, fixture construction, metalworking, maintenance, workshop operations, service applications (Hydraulic press, C-frame press, single-column press, assembly press, small-series production press, workshop press, 20-ton press, pressing press, straightening press, industrial press, C-frame press) Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German Machinery Directives and European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements as they meet all aspects of the national Brazilian safety regulation NR 12, which is based on these. Our strength lies in the design and construction of special machines and press automation. We distribute customized hydraulic presses at surprisingly affordable prices. The hydraulics of the presses predominantly use components from leading European manufacturers.

Condition: used, Year of construction: 1976, pressure 20 t throat 185 mm stroke 100 mm table surface area 380 x 350 mm Nlodjtqqwuspfx Akusb dayligth 250 mm table height over floor 840 mm total power requirement 4 kW weight of the machine ca. 1,3 t