Used Singpo Cmm 80 for sale (18,334)

Condition: like new (used), Year of construction: 2023, operating hours: 500 h, functionality: fully functional, machine/vehicle number: H32023/1001, Production line for manufacturing empty capsules Consisting of: • Mixing tank for preparing HPMC solution • Dipping process system for capsule forming with drying tunnel • Cutting machine for capsule cap Gsdpfoyyq Tbex Afuobu • Cutting machine for capsule body • Assembly machine • Sorting system with camera inspection and freely programmable individual reject • Compressed air system with refrigeration dryer and filtration system • Purified water system (under 10ppm) • Clean air system • Enclosed room with several compartments and airlock, 210 m² Turnkey solution including know-how transfer, installation, training, long-term consultancy, and technical service The system is commissioned and calibrated on-site. The plant is currently fully assembled and in production. Requirements: floor that is easy to clean, sufficient electrical power supply, adequate water supply, sufficient floor load capacity.

Condition: used, Year of construction: 2019, battery capacity: 1,376 Ah, battery voltage: 80 V, overall weight: 2,500 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Battery type: 8 PzS Nominal voltage: 80 V Capacity: 1,376 Ah Voltage in idle state: 88.89 V Suitable for: Linde E70 and E80 Dimensions & Weight Dimensions (L x W x H): 1,290 x 1,030 x 770 mm Net weight: 2,500 kg All dimensions are approximate values. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift truck on site. Loading is done at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Gbodpoz Iw N Tofx Afusu Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 1156

Condition: ready for operation (used), Year of construction: 2000, operating hours: 28,027 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain Mill Plus, spindle speed (max.): 18,000 rpm, No minimum price – guaranteed sale to the highest bidder! Vertical machining center with a virtually new spindle (the machine received a new spindle after 23,919 operating hours)! TECHNICAL DETAILS Travel in X-axis: 800 mm Travel in Y-axis: 700 mm Travel in Z-axis: 600 mm Spindle Spindle speed: 18,000 rpm Tool holder: HSK 63 MACHINE DETAILS Internal coolant supply: 40 bar Gsdpfxez Hu Sij Afujbu Control system Control system manufacturer: Heidenhain Control system model: Mill Plus Spindle operating hours: 28,027 h Spindle replacement at: 23,919 h EQUIPMENT NC rotary table with C-axis NC swiveling head FD function (free-form machining) Pallet changer Infrared measuring probe for workpiece measurement Additional magazine with 120 positions

Condition: used, Year of construction: 1999, operating hours: 43,000 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 550 mm, spindle speed (max.): 18,000 rpm, total height: 2,400 mm, total width: 2,600 mm, total length: 2,600 mm, type of input current: three-phase, overall weight: 6,000 kg, input voltage: 400 V, workpiece weight (max.): 500 kg, number of slots in tool magazine: 24, number of axes: 3, Equipment: documentation/manual, rotational speed infinitely variable, We are offering this used Deckel Maho DMU 80 E machining center, manufactured in 1999, for sale. Serial number: 1109.0001113 Year of manufacture: 1999 Can be inspected while powered on Control system: Heidenhain 426m with internal hard drive If you have any questions or require further information, please do not hesitate to contact us via message or phone. The machine can be disassembled by the buyer. Gsdoz E Dl Nopfx Afusbu No direct sales to countries outside the EU. We will not handle customs clearance.

Condition: used, functionality: unexamined, Year of construction: 2006, machine/vehicle number: 109, control type: NC control, actuation type: hydraulic, controller manufacturer: siemens, pipe diameter (max.): 80 mm, pipe length (max.): 4,500 mm, tube wall thickness (max.): 4 mm, bending angle (max.): 180 °, overall weight: 1,500 kg, Equipment: CE marking, emergency stop, Tracto Technik mandrel bending machine TB 80 L Year of manufacture 2006 with bending tools 11/4", 11/2", 2" gas with mandrel rods and mandrels Tube feed length 4500 mm Bending direction: right Bending capacity up to tube 76.1 x 4.0 mm Maximum bending radius 200 mm Electro-hydraulic drive 3.5 kW 400 volts 50 Hz 3-phase Overall length 5615 mm Weight 1500 kg Freestanding bending head for maximum bending freedom Electronic bending axis control via touch panel, with setpoint/actual value display, automatic angle adjustment Godpfx Aez Rn Srefujbu and memory function Tube clamping hydraulically, clamping pressure adjustable Glide block adjustment hydraulically Glide block unit rotating (glide guide) Bending mandrel extraction hydraulically Machine is mobile and can be used flexibly

Condition: like new (used), Year of construction: 2024, machine/vehicle number: 8445, functionality: fully functional, operating hours: 3,000 h, power: 80 kW (108.77 HP), input voltage: 380 V, input current: 126 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 750 °C, inner dimension height: 1,000 mm, total height: 4,425 mm, number of chambers: 1, control type: PLC-controlled, actuation type: electric, fuel type: electric, Equipment: CE marking, documentation/manual, We offer this Rohde SG 80/120 nitriding furnace, which is new and manufactured in 2024. Manufacturer: Rohde Schutzgasofen GmbH Model: SG 80/120 Year of manufacture: 2024 Gbodpfxezuabzj Afusu Condition: As new Category ID: 34 Type ID: 4293 Type: Nitriding furnace If you have any questions or need further information, please do not hesitate to send us a message or contact us by phone.

Condition: good (used), Year of construction: 2017, functionality: fully functional, We offer you: CNC machining center, universal Manufacturer: DMG MORI Type: DMU 80 evo Year of manufacture: 2017 Control: Heidenhain TNC 640 Technical data: Travel ranges: X-axis: 800 mm Y-axis: 650 mm Z-axis: 550 mm Rotary range C-axis: 360° Gsdpjz Eby Refx Afuobu Swivel range B-axis: -5° to +110° Main spindle: Tool interface: HSK-63A Speed range - main spindle: 20,000 rpm Drive power - main spindle (100/40%): 35 / 25 kW Torque: 130 / 86 Nm Rotary table: Table dimensions: 800 x 700 mm Max. table load: 600 kg Tool changer: Number of tool positions: 120 Feed rates: Rapid traverse (x/y/z): 50 m/min Operating hours: approx. 36,600 h Spindle hours: approx. 20,350 h Technical features & accessories: - Active cooler - Direct path measuring system in all axes - Full enclosure - Articulated belt chip conveyor - Coolant nozzle - MPC – Machine Protection Control - NC swivel rotary table incl. table cooling - Internal coolant supply 40 / 80 bar, consisting of: - 980 l tank - Purge air for linear measuring systems - Bed flushing - Extended chip flushing - Coolant temperature control - Oil and emulsion mist separator, mechanical - Blow-off air through the spindle center - Infrared measuring probe, manufacturer Heidenhain TS 649 - Laser tool measurement, manufacturer BLUM NT - Preparation for 3D quickSET - Preparation for handling system PH 150-8 - Operating mode 4 - Free M-functions - Automation, manufacturer Zero Clamp Zerobot 100P Accessories, tools and clamping devices shown in the pictures are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information, as well as prior sale, are reserved!

Condition: used, Year of construction: 2011, functionality: unexamined, machine/vehicle number: E17423-1, Avermann SSP-80 SIMPLEX stationary screw press | 11 kW | Year of construction 2011 For sale: Avermann SSP-80 SIMPLEX stationary screw press, year of construction 2011. Gbedpfx Asz Enz Isfusu This robust stationary screw press from Avermann is designed for the efficient compaction and transportation of various waste and material streams. The powerful screw continuously transports and compacts the material towards the connected container. The machine is heavy-duty and well-built, making it very suitable for professional use in industries such as manufacturing, logistics, recycling, and waste processing. Technical specifications: Brand: Avermann Type: SSP-80 SIMPLEX Year of construction: 2011 Serial number: E16732-1 Power supply: 400 V / 50 Hz Power: 11.0 kW Connected load: 63 A Stationary design Powerful screw drive Large feed opening Robust industrial construction Details: The machine is in good used condition. The screw and feed side are easily accessible, and the machine is equipped with an integrated electric drive and control system. A screw press has the advantage that the material is continuously fed and compacted. This makes the machine very interesting for companies with larger or constant waste streams that want to significantly reduce the volume. Inspection and testing are possible by appointment. Please feel free to contact us for more information, pricing, or technical questions. Keywords: Avermann, SSP-80, SSP 80, SIMPLEX, screw press, stationary screw press, waste compactor, waste compaction, compactor, recycling, press installation, screw compactor, Schneckenverdichter.

Condition: used, Year of construction: 2011, functionality: unexamined, machine/vehicle number: E17427-1, Avermann SSP-80 SIMPLEX stationary screw press | 11 kW | Year of construction 2011 For sale: Avermann SSP-80 SIMPLEX stationary screw press, year of construction 2011. This robust stationary screw press from Avermann is designed for the efficient compaction and transport of various waste and material streams. The powerful screw continuously transports and compacts the material towards the connected container. The machine is heavily built and very suitable for professional use in various industries, including manufacturing, logistics, recycling, and waste processing. Technical specifications: Brand: Avermann Type: SSP-80 SIMPLEX Year of construction: 2011 Godpfxez En A Sj Afujbu Serial number: E17427-1 Power supply: 400 V / 50 Hz Power: 11.0 kW Connected load: 63 A Stationary design Powerful screw drive Large feed opening Robust industrial construction Special features: The machine is in good used condition. The screw and feed side are easily accessible, and the machine is equipped with an integrated electric drive and control system. A screw press has the advantage that the material is continuously fed and compacted. This makes the machine very interesting for companies with larger or constant waste streams that want to significantly reduce the volume. Inspection and testing are possible by appointment. Please feel free to contact us for more information, pricing, or technical questions. Keywords: Avermann, SSP-80, SSP 80, SIMPLEX, screw press, stationary screw press, waste compactor, waste compaction, compactor, recycling, pressing system, screw compactor, Schneckenverdichter.

Condition: used, Year of construction: 2010, functionality: unexamined, machine/vehicle number: E16732-1, input current: 63 A, Avermann SSP-80 SIMPLEX stationary screw press | 11 kW | Year of manufacture 2010 For sale: Avermann SSP-80 SIMPLEX stationary screw press, manufactured in 2010. This robust stationary screw press from Avermann is designed for the efficient compaction and transport of various waste and material streams. The powerful screw continuously transports and compacts the material towards the connected container. The machine is heavy-duty and well-built, making it very suitable for professional use in industries such as manufacturing, logistics, recycling, and waste processing. Technical specifications: Brand: Avermann Type: SSP-80 SIMPLEX Year of manufacture: 2010 Serial number: E16732-1 Power supply: 400 V / 50 Hz Power: 11.0 kW Connected load: 63 A Stationary design Powerful screw drive Large feed opening Robust industrial construction Special features: The machine is in good, used condition. The screw and feed side are easily accessible, and the machine is equipped with an integrated electric drive and control system. Godez Eny Ropfx Afuobu A screw press has the advantage that the material is continuously fed and compacted. This makes the machine very interesting for companies with larger or constant waste streams that want to significantly reduce the volume. Inspection and testing are possible by appointment. Please feel free to contact us for more information, pricing, or technical questions. Keywords: Avermann, SSP-80, SSP 80, SIMPLEX, screw press, stationary screw press, waste compactor, waste compaction, compactor, recycling, press system, screw compactor, Schneckenverdichter.

Condition: used, Year of construction: 1989, operating hours: 2,500 h, functionality: fully functional, machine/vehicle number: 5399 195, type of input current: three-phase, total length: 6,830 mm, total height: 1,490 mm, total width: 1,400 mm, feed length X-axis: 80 mm, feed length Y-axis: 20 mm, feed length Z-axis: 80 mm, input voltage: 400 V, overall weight: 2,100 kg, compressed air connection: 60 bar, air demand: 60 m³/h, input current: 63 A, year of last overhaul: 2020, sheet thickness aluminum (max.): 40 mm, air pressure: 60 bar, power: 6 kW (8.16 HP), product height (max.): 100 mm, product height (min.): 70 mm, product length (max.): 135 mm, product length (min.): 110 mm, SL80 Bradman Machine – Used & Fully Functional SL80 Bradman machine for sale. The machine is used but in good working condition and is fully functional. It has been well maintained and is ready for use. Gbsdpezx Ehzefx Afuou Selling due to no longer being required. Buyer is welcome to inspect the machine before purchase. Please get in touch for more information or additional photos.

Condition: used, Year of construction: 2018, pressing force: 80 t, filling opening width: 1,040 mm, filling opening length: 1,110 mm, bale length: 1,200 mm, bale width: 1,120 mm, bale height: 1,120 mm, bale weight: 600 kg, total width: 1,830 mm, total height: 2,620 mm, total length: 4,200 mm, type of input current: three-phase, input voltage: 400 V, input current: 32 A, overall weight: 8,000 kg, input frequency: 50 Hz, DIXI 80 SLD Horizontal Baler – Year of Manufacture 2018 Used, fully functional DIXI 80 SLD horizontal baler for the economical compaction of cardboard, paper, and comparable recyclable materials. Technical data: Manufacturer: DIXI Model: 80 SLD Year of manufacture: 2018 Pressing force: 80 t Drive power: 11 kW Connection: 400 V / 32 A Feed opening: approx. 1,040 x 1,110 mm Bale size: approx. 1,120 x 1,120 x 1,200 mm Bale weight: approx. 500–600 kg, depending on the material Press cycle: approx. 35 seconds Throughput: up to approx. 1,000 kg/h, depending on the material Gbedsz Hqwbopfx Afuju Machine weight: approx. 8,000 kg Machine dimensions: approx. 4,200 x 1,830 x 2,620 mm (L x W x H) The machine is in used, fully functional condition. All information is provided without warranty. Subject to prior sale.

Condition: used, Year of construction: 2009, operating hours: 61,894 h, travel distance X-axis: 2,340 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, feed length X-axis: 2,340 mm, feed length Y-axis: 800 mm, feed length Z-axis: 600 mm, nominal power (apparent): 25 kVA, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, total height: 3,250 mm, total length: 6,200 mm, total width: 3,700 mm, table width: 750 mm, table height: 930 mm, table length: 1,400 mm, rotary table diameter: 800 mm, rotational speed (min.): 50 rpm, rotational speed (max.): 12,000 rpm, overall weight: 16,000 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 12,000 rpm, spindle nose: SK 40, number of slots in tool magazine: 30, tool length: 330 mm, tool diameter: 80 mm, tool weight: 15,000 g, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, We offer this used Hedelius RS 80-K-2300 5-axis machining center, manufactured in 2009. Key Data Manufacturer HEDELIUS GmbH Type RS 80-K-2300 Year of Manufacture 2009 Power Requirement / Voltage 29 kW / 400 V / 50 Hz (25 kVA) Total Weight 16000 kg Footprint Length 6.20 m Width 3.70 m Height 3.25 m Control System Program Input HEIDENHAIN Controller iTNC 530 NC Software Version 340490 04 SP4 PLC Software Version RS80_K V1.54 Development Level L4 Operating Hours Control System On 63333 Machine On 61894 Program Run Time 28295 Travel Ranges (Total Working Area) X-Axis 2340 Y-Axis 800 Z-Axis 600 Right Working Area (Fixed Machine Table Area) X-Axis 945 Y-Axis 800 Z-Axis 600 Left Working Area (Rotary/Swivel Table Area) (simultaneous machining possible) X-Axis 800 Y-Axis 800 Z-Axis 600 A-Axis +10° / -90° C-Axis 0 - 360° Clamping Surface - Fixed Machine Table Length 1400 Width 750 Clamping Surface - Rotary/Swivel Table Length Ø 800 Width 630 Work Table T-Slots DIN 650 Slot Width 18 / 18 mm Slot Pitch 125 / 125 mm Number 5 / 5 Table Height Fixed Machine Table 930 mm Celox Motor Spindle Manufacturer Kessler Type DMS 100.XL-633.607 Speed Range 50 – 12000 rpm Tool Shank SK 40 Tool Magazine Magazine Capacity 30 tools Max. Tool Diameter Ø 80 mm (with available free slots) Ø 125 mm Max. Tool Length 330 mm Max. Individual Tool Weight 15 kg Total Magazine Weight 450 kg Special Accessories Scraper Conveyor AME GmbH Total Length ≈ 5700 Height ≈ 1760 Depth ≈ 830 Weight 515 kg Band Filter System (High-Pressure Coolant System) Model PS 120 Tank Capacity 780 l Flow Rate 120 l/min Filter Fleece 670 mm 100 m on a roll Length ≈ 2320 Gbodpsz Hx Ihsfx Afusu Height ≈ 1060 Depth ≈ 850 Weight 515 kg Motor Spindle - Cooling Unit Manufacturer Hyfra GmbH Type Chilly-25-S Machine No. 09010098 Year of Manufacture 2009 Weight 65 kg Control Cabinet - Cooling Unit Manufacturer Pfannenberg Type DTS 7101 SC Model No. 08390173726 Laser Light Barrier Manufacturer BLUM Type P87.0634 Laser System MINI – MICRO - NANO Wireless Measuring Probe Manufacturer HEXAGON Model m&h Radio-wave Touch Probe Type RWP20.50-M Extra KinematicsOpt HEDELIUS Transformation Kit If you have any questions or require further information, please do not hesitate to contact us.

Condition: excellent (used), Year of construction: 2021, operating hours: 5,646 h, functionality: fully functional, clamping force: 800 kN, screw diameter: 40 mm, clearance between the columns: 420 mm, displacement volume: 201 cm³, plate length: 670 mm, plate height: 670 mm, total length: 4,300 mm, total width: 1,600 mm, total height: 2,000 mm, overall weight: 3,900 kg, Equipment: documentation/manual, KraussMaffei KM 80-380 CX Stock No.: 503703 Manufacturer: KRAUSS MAFFEI Type: KM 80-380 CX Control System: MC6 Year of Manufacture: 2021 Operating Hours: 5646 h Technical Data - Clamping Unit Clamping Force: 800 kN Tie Bar Spacing h x v: 420 x 420 mm Platen Size h x v: 670 x 670 mm Minimum Mold Height: 250 mm Maximum Mold Height: 750 mm Opening Stroke: 500 mm Ejector Stroke: 150 mm Ejector Force: 43 kN Gsdpfx Afez Ayi Ususbu Centering of Moving Platen D: 125 mm Centering of Fixed Platen D: 125 mm Technical Data - Injection Unit Screw Diameter: 40 mm Injection Volume: 201 cc Injection Pressure: 1860 bar Screw Length: 20 l/d Free Injection Flow Rate: 295 g/s Number of Heating Zones: 5 Dimensions & Weight Machine Dimensions L x W x H: 4.3 m x 1.6 m x 2 m Total Weight: 3900 kg Equipment 3 freely programmable inputs and outputs Screen text: German Screen text: Polish CEE socket 16A CEE socket 32A Increased ejector force Hydraulic core pull 1x Air valve 1x Machine with material hopper Machine with water manifold Leveling elements Plasticizing unit, highly wear-resistant and corrosion-resistant BDE interface Interface for color dosing unit USB interface Schuko socket 10A

Condition: excellent (used), Year of construction: 2013, Engel Victory 80/50 Spex with sprue picker Engel ER-USP5 / Hybrid machine Year of manufacture: 2013 Injection unit: Screw diameter: 18 mm Injection weight: approx. 22 g Injection pressure: 2200 bar Dosing volume: 25 ccm Clamping unit: Clamping force: 50 t Tie bar spacing: 0x0 mm Size of clamping plates: 500x450 mm Ejector: hydraulic Clamping unit: hydraulic Control system: CC 200 - Touchscreen Godpfx Asz Iqn Nsfujbu Additional equipment: Tie-bar-less, hybrid machine: energy-saving and very quiet Air valve x 2 Control system with hot runner system x 6 Injection unit is wear-resistant and resistant to corrosion Main motor of the machine - servo motor driven by an inverter - energy saving It is possible to change the screw diameter to 22 or 25 mm Purchase of the sprue picker at an additional cost Dimensions: Weight: 2900 kg Length/Width/Height: 3.30x1.60x2.30 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in technical live tests at our company in Łódź. Price: On request

Condition: used, Year of construction: 2006, Technical details: x-travel: 800 mm Gsdpfsz Rn E Ejx Afusbu y-travel: 800 mm z-travel: 800 mm control: HEIDENHAIN iTNC 530 power capacity - milling spindle: 28 / 19 kW tool taper: HSK 63 Tool changer: 40 pos. rotary table diameter: 900 x 700 mm table load capacity: 1.400 kg turning speeds: 12.000 1/min rapid traverse: 60 m/min : 62 kVA weight of the machine ca.: 13 t dimensions of the machine ca.: 4,1 x 3,2 x 3 m 5-axis simultaneously machining center, NC-round-table, B-axis, internal coolant supply 40 bar 600l incl. paperfilter, chipconveyor, mode 4, ROTOCLEAR, 3 D touch probe HEIDENHAIN TS 641 (defect), air blast through spindle, el. handwheel, BLUM laser, flushgun, oilmist suction, accessories: toolholders, clamping tools, vices (see photo) approx. 64.300h "machine on", approx. 25.700h "spindle on" in total, last spindle change in 2019 *

Condition: good (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, feed length X-axis: 800 mm, feed length Y-axis: 700 mm, feed length Z-axis: 600 mm, controller manufacturer: Siemens, controller model: 840D, spindle nose: SK-40, number of slots in tool magazine: 60, Deckel Maho DMC 80 U vertical machining center, year of construction 2003. Фрезерный станок с ЧПУ Deckel Maho DMC 80 U 2003 года производства. Находится на предприятии в г.Минске, подключен. Хорошее техническое состояние, стойка Siemens 840D. Ходы осей: X 800 мм / Y 700 мм / Z 600 мм. Магазин инструментов на 60шт. конус шпинделя SK-40. Двухпаллетная система Gbodez Hxryspfx Afuju

Condition: used, Year of construction: 2022, HORIZONTAL PANEL SIZING SAWS GABBIANI P KEY FEATURES INDIVIDUALLY SELECTABLE AIR CUSHION TABLE: AN INDISPENSABLE TOOL LATERAL SAFETY DEVICES: MORE SPACE FOR WORKING FLOATING CLAMPS: THE GUARANTEE FOR A PERFECT CUT TECHNICAL DATA GENERAL SPECIFICATIONS gabbiani p80 Saw blade overhang mm 80 Work table height mm 950 Number of clamps standard 5 Number of clamps maximum for versions 33 9 CUT DIMENSIONS Version 33 (Opt.) mm 3300x3200 AXIS SPEED Variable saw carriage speed m/min 6 – 60 Variable slider speed () m/min 60 MAIN SAW BLADE Motor power (S6 -40%) - 50hz (Star-delta start) kW (HP) 7 (9) (11) Speed – 50 hz U/min 4650 Saw blade diameter mm 340 Arbor diameter main saw blade mm 80 SCORING SAW Motor power (S6 -40%) - 50hz kW (HP) 1,5 (2) Speed – 50 hz U/min 5850 Scoring saw diameter mm 200 Arbor diameter scoring saw blade mm 80 INSTALLATION Installed power Kw 12÷15 Base machine voltage Euro Voltage (400 V / 50 hz) Compressed air requirement l/min 300 Required compressed air pressure bar 7 Extraction air requirement m3/h 2190 Extraction air speed m/sec 20 Extraction port diameter mm 4x120 () Note: for countries where EC standards apply, the forward feed speed of the slider is limited to 25 m/min. GENERAL FEATURES Automatically controlled horizontal panel sizing saw with PC/PLC control, for cutting panels made of solid wood, MDF, chipboard, plywood and similar materials. Machine frame and work table - Machine frame made as a steel tube construction - Work table made of rib-reinforced steel with Bakelite coating - Longitudinal stop on the left side Saw carriage made of steel, consisting of: - a motor for the main saw blade and a motor for the scoring saw blade - Vertical stroke of the saw blade on linear ball bearing guides and shoes - Running rollers made of hardened and ground steel - Balanced mass distribution to ensure the best cutting quality - Running direction against the longitudinal stop - Saw carriage drive via rack and pinion - Carriage run on cylindrical guides - Cylindrical guides made of hardened and ground steel (5-year guarantee), protected by special dust scrapers - Pneumatic switch for quick and safe changing of the main saw blade and the scoring saw Pressure beam - Pressure beam with uniform pressure on the workpiece over the entire cutting length with recesses to prevent collisions with the clamps; pneumatic height adjustment via high-precision racks and pinions, pressure adjustable from 1.5 to 6 bar - Double extraction system with a unit above the pressure beam to clean the work table and a unit below on the saw carriage - Lateral automatic aligner with pneumatic cylinder over the entire length. Sliding on linear ball bearing guides and shoes. * Travel: 1200 mm * minimum working width: 60 mm * maximum working width: 1200 mm Positioning slider and rear part of the machine - Positioning slider over the entire length with motor drive via a robust shaft. Positioning slider movement on a double T-beam. The drive is via 2 precision pinions, which guarantee constant parallelism between the slider and the cutting line. The slider is controlled by a brushless motor to enable the regulation of the speed according to the requirements for positioning and a quick return - Stepless dru Gedpsz Ehvxofx Afuobu

Condition: good (used), Year of construction: 2011, functionality: fully functional, We offer you: CNC machining center, universal Manufacturer: DMG MORI Type: DMU 80 P duoBlock Year of construction: 2011 Control system: Heidenhain iTNC 530 Technical data: Travel ranges: X-axis: 800 mm Y-axis: 1,050 mm Z-axis: 800 mm Main spindle: Max. spindle speed: 18,000 rpm Rotary table: Gedpoz Ebzusfx Afusbu Table diameter: d 900 x 700 mm Tool changer: Tool holder: HSK-A63 Number of tool positions: 60 Operating hours: approx. 49,285 h Spindle hours: approx. 15,380 h Technical features & accessories: - Universal milling head with controlled B-axis - Coolant tank 500 l - Internal coolant supply 40 bar - Chip conveyor with integrated fabric band filter - Rotating viewing window - Infrared measuring probe, manufacturer Heidenhain TS 649 (if available) - Preparation for 3D quickSET - Signal tower, 4 colors - Flushing gun - Cooling system with compressed air through the spindle center - Electronic handwheel (if available) - Operating mode 4 Accessories, tools and clamping devices shown in the pictures are only included in the scope of delivery if this is stated in the additional information. Subject to changes and errors in the technical data and information, as well as prior sale!

Condition: good (used), input voltage: 380 V, Alpina Cutter Model PB 80 990 80 Liters Gsdpfx Ajz N Aldjfusbu 27.9 kW Motor voltage 380V Control voltage 220V

Condition: good (used), Year of construction: 2007, operating hours: 14,000 h, functionality: fully functional, travel distance X-axis: 2,300 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, controller manufacturer: Heidenhain 530, controller model: Heidenhain ITNC 530, rotational speed (min.): 8,000 rpm, spindle speed (min.): 8,000 rpm, coolant supply: 20 bar, number of spindles: 1, input voltage: 29 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Hedelius C80, used, fully operational. The machine has always been maintained by Hedelius over the years to keep it up to standard. (New spindle, new guides, etc. – invoices and documentation available) Spindle hours: 14,000 h 3-axis machining Coolant filtration system Pendulum operation, mountable partition available Heidenhain 530 Gbjdpfx Aey Rmv Hefusu ICS 20 bar (internal cooling) Handwheel Measuring probe SK 40 Tool changer Total weight: 15 t, Transport dimensions approx. 6500x3000x3000 mm

Year of construction: 2002, condition: good (used), functionality: fully functional, machine/vehicle number: 023116, Wenzel RS 1012 CNC 3D Coordinate Measuring Machine The Wenzel RS 1012 is a CNC 3D coordinate measuring machine (CMM) with a horizontal arm design, intended for the precise measurement of medium to large-sized workpieces, such as components and assemblies. The machine concept is based on a stable cast iron or granite base plate that serves as a measuring table, with a laterally mounted guide system, enabling open loading from three sides. Technical Core Components & Specifications Machine Type: Horizontal Arm 3D Coordinate Measuring Machine (CMM) Manufacturer: WENZEL Präzision GmbH Model / Year of Manufacture: RS 1012 / 2002 Godpfszz Hywox Afuebu Serial Number: 023116 Measuring Volume (X/Y/Z): 2,000 mm × 1,000 mm × 1,200 mm Probing System: Renishaw PHC10-3 PLUS (interface/controller for motorized rotary-tilt head PH10) Design: Horizontal Arm Measuring Machine (Column Measuring Machine) with integrated base plate Measuring Accuracy (MPE): 15.0 µm+ (L / 45.0 mm, total maximum length measuring error in the measuring range is approximately 50.0 micrometers) Sensor System (Standard Configuration): Delivery: Without PC Key Features of the RS Series High Flexibility: The machine generally does not require a special foundation and can be flexibly integrated into existing production and laboratory spaces. Unobstructed Accessibility: Due to the lateral guidance of the horizontal arm, the measuring table is freely accessible, which facilitates the placement of heavy workpieces using a crane or forklift. Multi-Sensor Capability: In addition to tactile probing systems (such as the TP20), the series can often be equipped with optical line lasers or scanning sensors by the manufacturer. "One-stop shop: We would be happy to offer you suitable bank financing for your project." More new and used items can be found in our shop! International shipping costs on request!

Condition: ready for operation (used), Year of construction: 1995, Available immediately ex-yard: CNC tool milling machine, Deckel Type FP 5 – 80 Year of manufacture 1995 CNC control: Dialog 12 Universal table: 750 x 520 mm Travel distances X / Y / Z: 800 / 550 / 500 mm Drive power: 9 kW Spindle quill stroke: 80 mm Gbsdez Ixi Uopfx Afueu Electronic handwheel Spindle speeds: 32 – 5000 rpm Feed rates: 0 – 6000 mm/min Weight: 4.5 tons Price: Euro 2,500.00 (plus VAT), ex-yard.

Condition: good (used), Year of construction: 2011, Matador MD 80 C bakery oven - used - year of manufacture 2011 Gedsznwqyjpfx Afujbu - area 8 m² - 4 chambers (1.2 x 1.6 m) - one chamber with a pull-out function - hood with fan - computer control - gas or oil burner - good technical condition - collection from warehouse / shipping option available - possibility of refurbishment and installation - price on request

Condition: good (used), Year of construction: 2016, operating hours: 1,030 h, functionality: fully functional, Horizontal baling press Dixi 80 SLD, with lifting/tilting device, semi-automatic, year of manufacture 2016 Manufacturer: Dixi Type: Dixi 80 SLD Year of manufacture: 2016 Operating hours: 1030 Drive power: 11 kW, 400 V / 23 A Feed opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Pressing cycle: approx. 35 s Capacity: approx. 1000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500-600 kg Tying: 3-strand, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Materials: Paper, cardboard, film Note: The press is in very good condition. It has been inspected and tested by us in 28816 Stuhr. You can find the video on our website or our YouTube channel. The hydraulic hoses should be replaced. An operating manual is available. Gjdpfx Afoz A Tzbeujbu Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is non-binding, subject to prior sale, and may be revoked at any time. Inspections are possible by arrangement. The sale is made against advance payment, ex works, without warranty.