Used Slit-Coiler for sale (517)

Year of construction: 1986, condition: ready for operation (used), A complete slitting line Burghardt & Schmidt including a Grindingmaster is available. Uncoiler load capacity: 3000kg, expansion range: 375mm-420mm, knife inner/outer diameter: 80mm/180mm, separator disc dimensions X/Y/Z: 130mm/80mm/1.5mm, recoiler load capacity: 2500kg, usable width: 250mm, cutting performance: 0.1/0.3/0.5/0.8, cuts: 25/20/12/25, material strength: 1800N/m². System dimensions X/Y/Z: approx. 11000mm/5600mm/2000mm, weight: approx. 8000kg. Dokumentation vorhanden. An on-site inspection is possible. Bodpfx Ajxxziusfwodg

Condition: used, 72”x 0.5” x 60,000Lb Braner Turret Type Loop Slitting Line Braner Turret Type Loop Slitting Line is used for coil metal cross cutting with maximum width 72”, maximum 0,5” metal thcikness and 60,000Lb coil capacity Make: Braner Year New: 1996 Material Thickness: .060″ – .500″ Material Width: 12″ – 72″ Coil Weight: 60,000Lb Line Speed: 120 – 250 feet per minute Coil ID: 20″ – 24″ Coil OD: 75″ Slitting Cap: .500″ / 4 cuts – .125″ / 40 cuts Entry L-Type Coil Car Hydraulic Lift & Traverse Self Contained Hydraulics Control Panel Mandrel Uncoiler Powered Hold – Down Roll Outboard Bearing Support Hydraulic Feed-Up Drive Water Cooled Brake Hydraulic Peeling Table Driven Entry Pinch Rolls Adjustable Edge Guides Entry Mechanical Crop Shear Two Turret Type Slitting Heads Arbor Diameter: 12″ Powered Arbor Adjustment Powered Head Rotation Motor: 100HP DC Drive Lots of Knives & Tooling Two (2) Scrap Winders Powered Open / Close Heavy Duty Design Looping Pit Cross Over Table Drag Board Tension Stand Material Feeding Table Bdjdpfxsrn Sqhs Afweg Recoiler Hydraulic Drum Powered Push Off Hydraulic Over-Arm Separator Outboard Bearing Support 300HP DC Motor Drive Exit L-Type Coil Car Hydraulic Lift & Traverse Self Contained Hydraulics Upgraded Siemens Digital Drives, Electrics, Controls, Knives & Tooling

Condition: used, Slitting line SECO 60″ x 0.375″ x 50,000Lb (A3791) is perfect solution for longitudinal coil metal cutting into strips with maximum metal thickness 0.375” and maximum coil width 60” Cold Rolled and Hot Rolled Steel 18-60” Strip Width 2 Speed Gear Box 200-500 FPM Thickness: .032″-.375” Complete Line with the Following Components: L-Type Entry Coil Car 40,000# Max Coil Weight Uncoiler: Coil ID: 23-30.50” Coil OD: 72” Maximum Coil Weight: 40,000# Maximum Sliding Base Hydraulic Expansion Peeler and Hold Down Roll 5 Roll Coil Breaker Entry Adjustable Edge Guides Entry Crop Shear Slitting Head: 10” Arbors 40 HP Motor Drive 2 Scrap Winders Recoiler: Coil OD: 72” Max Coil ID: 24” Bdjdpfx Ajtiy Ntofwjg 150HP DC Motor 3 Arm Exit Turnstile 40,000# per Arm Motorized Turn Complete Line with Knives, Rubbers, and Spacers Controls, Hydraulics, and Electrics

Condition: used, MANFACTURER - PRO-ECO TYPE - PRECISION DOUBLE LOOP SLITTING LINE MATERIAL - GRAIN ORIENTED, NON-GRAIN ORIENTED, SILICON STEEL, COLD ROLLED STEEL SHEAR STRESS - 100,000 PSI - SILICON STEEL | 60,000 COLD ROLLED STEEL MAX YIELD STRESS - 80,000 PSI MIN YIELD STRESS - 30,000 PSI MAX COIL WEIGHT - 50,000 LBS ENTRY/EXIT MAX COIL WIDTH - 48" NOMIMAL (50" MAXIMUM) ENTRY/EXIT MIN COIL WIDTH - 8" ENTRY / 1" EXIT MAX COIL OD - 72" ENTRY / EXIT MIN COIL OD - 36" ENTRY / EXIT MAX STRIP THICKNESS - 0.025" IN - SILICON STEEL / 0.050" CRS MIN STRIP THICKNESS - 0.010" MAX CUTS - 32 LINE SPEED - 1200 FPM ELECTRICAL - 575 V, 3 PH, 60 CYCLE AIR SUPPLY - 80 PSI Bodszk Nitopfx Afwsdg LINE DIRECTION - LEFT TO RIGHT MODE OF OPERATION - FULL LOOP DRIVE-SLIT, DOUBLE LOOP LINE COMPONENTS: COIL CAR MANDREL UNCOILER PEELER TABLE ENTRY PIT GUIDE TABLES INTERMEDIATE GUIDES FELT STAND BEFORE ENTRY SHEAR ENTRY SHEAR SIDE GUIDES SLITTING HEAD BUTECH SCRAP CHOPPERS EXIT TABLE PRESSURE & TENSION ROLL STAND EXIT SHEAR RECOILER WITH OVERARM SEPARATOR EXIT COIL CAR ALSO AVAILABLE: INTEGRATED PACKAGAING LINE, INCLUDING: EXIT TURNSTILE DOWNENDER WEIGHT SCALE UNDER SEMI-AUTOMATED BANDING LINE 5/8" STEEL BANDING PICK AND PLACE STACKER MAX CAPACITY 6000 LBS PER SLIT COIL ROTATING CAROUSEL EXIT CONVEYOR SEMI-AUTOMATIC STRETCH WRAPPING MACHINE WEIGHT STATION CONTROLS, HYDRAULICS AND ELECTRICS FOR LINE

Condition: used, Material: 1095 High Carbon Steel Tensile Strength: 120,000 PSI Shear Strength: 96,000 PSI Thickness Range: .0045" - .025" Line Direction: Left to Right Cut Width & Thickness .0045" = 1/4" , 3/8" , 1/2" , 3/4" , 1" .0051" = 3/8" , 1/2" , 5/8" , 7/8" .0062" = 3/8" Line Speed: 1500 FPM Entry Strip Width: 18' Traverse Wider Coil Width: 8" Entry Coil ID: 15" - 22" Traverse Winder Coil ID: 11" Exit Coil ID: 16" Entry Coil OD: 54" Ribbon Wound Coil OD: 39" Exit Coil OD: 54" Entry & Exit Coil Weight: 10,000# Bodpeztc Tdsfx Afwedg Traverse Winder Coil Weight: 2250#` Complete Line With: Mandrel Uncoiler Hold Down Roll 3 Leaf Hydraulic Expansion 15 HP Drive Disc Drake Edge Control Unit Peeler Table / Deflector Roll Newcor Strip Welder with Planishing 2 Roll Material: 1095 High Carbon Steel Tensile Strength: 120,000 PSI Shear Strength: 96,000 PSI Thickness Range: .0045" - .025" Line Direction: Left to Right Cut Width & Thickness .0045" = 1/4" , 3/8" , 1/2" , 3/4" , 1" .0051" = 3/8" , 1/2" , 5/8" , 7/8" .0062" = 3/8" Line Speed: 1500 FPM Entry Strip Width: 18' Traverse Wider Coil Width: 8" Entry Coil ID: 15" - 22" Traverse Winder Coil ID: 11" Exit Coil ID: 16" Entry Coil OD: 54" Ribbon Wound Coil OD: 39" Exit Coil OD: 54" Entry & Exit Coil Weight: 10,000# Traverse Winder Coil Weight: 2250#` Complete Line With: Mandrel Uncoiler Hold Down Roll 3 Leaf Hydraulic Expansion Sliding Base 15 HP Motor 15 HP Motor Disc Brake Edge Control Peeler Table / Deflector Roll Newcor Strip Welder with Planishing 2 Roll Bridal Unit for Tension Control Double Roll Tracking Roll for Strip Alignment 2 Sets of Rubber Coated Deflector Rolls Edge Guides Andritz Slitter Head New in 2016 5" Diameter Arbors 12 Sets of Quick Change Tooling Arbors Pre-Packed Arbors Shimless Tooling Anti Friction Bearings 25 HP DC Drive, 1750/2000 RPM Scrap Baller Recoiler 16" Diameter Drum 10,000# Coil Capacity 30 HP DC Drive Hydraulic Push-Off Hold Down Roll 21" Drum Face 1 Arm Exit Turnstile Vertical Strand Separator Aligns Strips after Exiting the Slitter Deflector Rolls 12 Oscillating Recoilers 11" Diameter Drums Hydraulic Push-Off Vertical Edge Conditioners S Bridal Strip Tension Rolls (2) Hydraulic Traversing Oscillating Wheel 7.5 HP Drive 1 Arm Exit Turnstiles Powerflex Digital Drives 755 Allen Bradley PLC Digital Drives Digital Readouts Central Hydraulic Units Operator Push Button Stations Slitter Tooling Hydraulics & Electrics

Condition: used, Slitting line McKay 60''x0.625''x100,000Lb Make: McKay Material Thickness: .065″ – .625″ Maximum Material Width: 66″ Weight Capacity: 100,000Lb Coil ID: 24″ – 30″ Exit ID: 30″ Coil OD: 90″ Maximum Speed: 450 fpm Direction: L-R Pit Type Entry Coil Car Double Mandrel Uncoiler with Hold-Down Roll Hydraulic Peeler Bedpfx Afslwtzyowjdg Driven Pinch Rolls Coil Flattener with 200HP Drive Slitting Head with 16″ Arbor Diameter 250HP Drive Knives & Tooling Two (2) Scrap Choppers Recoiler with Over-Arm Separator 250HP DC Drive Exit Pit Type Coil Car Electrics, Hydraulics Controls, Tooling

Condition: used, 72″ x .187″ x 50,000Lb Paxson Loop Slitting Line Make: Paxson Material Width: 12″ – 72″ (Uncoiler 60″) Material Width: .010″ – .187″ Coil Weight: 50,000Lb Coil ID: 20″ – 24″ Coil OD: 72″ Speed: 500 /1000 fpm Bdodeihf Ufjpfx Afwsg Direction: Right to Left Material Strength: 40,000 yield / 50,000 psi shear Material: CR, HR, Galvanized Entry Transfer Cart Entry Coil Car Mandrel Uncoiler Powered Hold-Down Roll Powered Expansion Sliding Base Hydraulic Peeling Table Driven Pinch Rolls

Condition: used, 72″ x .187″ x 20,000Lb Universal Slitting Line Material Width: 12″ – 72″ Material Thickness: .015″ – .187″ Coil Weight: 20,000Lb Coil ID: 20″ Coil OD: 72″ Direction: Left to Right Entry Floor Standing Coil Car L-Type Design Hydraulic Lift & Traverse Mandrel Uncoiler Powered Hold-Down Roll Hydraulic Expansion Air Cooling Brake Sliding Base Hydraulic Peeling Table Slitting Head Arbor Diameter: 7″ Powered Arbor Adjustment 100HP DC Motor Knives & Tooling Recoiler Powered Push-Off Hydraulic Over-Arm Separator Hydraulic Expansion 100HP DC Motor Bjdpfxjihf Twj Afwedg Exit 2-Arm Turnstile Arm Width: 72″ Powered Rotation Complete Slitter with Electrics, Hydraulics, Controls, Tooling

Condition: used, Manufacturer: Burghardt + Schmidt Yom: 1999 Slitting shaft OD: 145mm Tool OD: 240mm Material that has been slit: Stainless Aluminium Coated / Paint coated material, Colours, stripes, etc. Coil weight: 5Tons (coil cars 6ton) Width: Entry min/max: 35 - 590mm (600mm) Slit strip Min/max: 19,5mm - 585mm - Less is possible with different tooling Thickness: Min/Max: 0,1mm - 2mm Bjdpfx Afozv Un Ejwjdg Speed: Stainless: 120m/min (Thicker end) Aluminium: 370m/min Coil ID's: 300; 400; 500mm Power: Pay off winder - 86kW DC Slitter - 82kW DC Re-Coiler - 230kW DC Scrap winder - 46kW DC Includes Leicht stamping + welding unit (WIG(TIG) 120/05/2/75/D-Z) EMG edge control at pay-off Entry bridle stand with edge control, camera control for e.g perfect parallelism of striped strips (painted etc.) Fume exhaust Scrap winder 2 Coil tilting tables, packaging table Fume exchaust at tension stand Siemens S7 controls On floor coil cars Overarm separation at rewinder Rewinder with hydraulic push off plate Traveling tension stand on linear guides 4 - arm coil turnstile at re-coiler Large set of tooling Required space aprox 16 x 12m (16 x 16 with the tilting tables, packaging area etc.)

Condition: excellent (used), Overall dimensions: 3700 x 1070 x 1700 mm Disc coil inner diameter: 460 - 600 mm Maximum sheet roll width: 1000 mm Direction of rotation: Bidirectional Bdodpfx Afjpvia Eoweg Hydraulic operation: - rotation - transverse movement on the chassis - shaft grip Pneumatic operation: - brake

Condition: used, Year of construction: 2022, functionality: fully functional, sheet thickness steel (max.): 1 mm, Forstner nuSLIT PRO – Cross and longitudinal slitting line with automatic knife adjustment and guillotine shear Year of manufacture: 2022 – factory overhauled Manufacturer: Forstner Bdsdpfx Afoyw Hxhewjg Equipment: - Control: Siemens SPS-F3 - Speed: 45 m/min - Standard entry shaft - Standard feeding table Slitting: - Upper shaft adjustment: Motorized (MOV) - Number of slitting knives: 5 pairs - Slitting knife type: Stainless steel Cross cutting: - Guillotine shear – cross cutting up to 1.5 mm steel possible - Knife type: Stainless steel The machine is being sold because the customer has purchased a new Forstner Coil Cell.

Year of construction: 2020, condition: like new (used), functionality: fully functional, For sale: A.Celli Nonwovens Stream In Line, manufactured in 2020 Industrial in-line winding and slitting system designed for the processing of nonwoven materials. Machine details: Manufacturer: A.Celli Nonwovens S.p.A. Machine type: Stream In Line Machine version: 668 Serial number: 2020026 Year of manufacture: 2020 CE marked Country of manufacture: Italy Bdedpfx Aszudfdefweg The machine comes from an industrial nonwoven production facility and is offered as shown in the photos. The system includes the main machine structure, winding and roller assemblies, drives and associated machine components. A detailed PDF with the complete technical specification of the machine is available upon request. We will be happy to provide it to seriously interested customers. Additional photos and further information are also available upon request. Price: on request / negotiable. Please contact us for further information.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 133/SCS, cutting speed: 35,000 mm/min, working width: 1,250 mm, feed rate X-axis: 35 m/min, product width (max.): 1,250 mm, number of straightening rollers: 7, We are offering a very well-maintained Krasser CENTURIO 1250 stand-alone slitting line, manufactured in 2023, for sale. Highlights Reinforced 7-roll leveling unit Max. coil width 1,250 mm Cutting speed up to 35 m/min Suitable for longitudinal and transverse cutting as well as leveling of strip steel Modern control system with touch operation Very well-maintained condition Ready for immediate use Technical data Bodpfx Afezvgbqswsdg Manufacturer: Krasser Model: CENTURIO 1250 Type: Stand-alone slitting line Year of manufacture: 2023 Condition: Very good Max. coil width: 1,250 mm Min. coil width: 250 mm Description The Krasser CENTURIO 1250 is a powerful sheet metal cutting system for the precise processing of steel, stainless steel, aluminum, copper, and zinc sheets. The reinforced 7-roll leveling unit is particularly noteworthy, as it enables excellent leveling quality and reliable processing of a wide variety of materials. The system is currently still in operation and can therefore be inspected at any time by appointment while running. This offers interested parties the opportunity to directly verify the condition, performance, and functionality of the machine. The machine is expected to be available in the first quarter of 2027. The exact date may vary slightly depending on the project, but we currently anticipate a release around February 2027. Early reservation or coordination of the delivery date is possible and desirable. Contact For further information, technical details, or to arrange a viewing appointment, we look forward to receiving your message or call. Category ID: 1052 Type ID: 136 Type: Slitting line

Condition: excellent (used), Year of construction: 2020, operating hours: 97 h, functionality: fully functional, machine/vehicle number: 098 / SCS, # KRASSER Centurio 1250 – Year of Manufacture 2020 – Slitting Line with 5 Automatic Knife Pairs, Leveling Unit, and Guillotine Shear For sale is a very well-maintained KRASSER Centurio 1250 from the year 2020. The machine was taken from an operational business and is in very good, immediately operational condition. It is ideally suited for sheet metal workshops, roofing companies, facade builders, and sheet metal processing companies for the economical processing of coil material. A special advantage: the machine recently underwent a comprehensive service by the manufacturer, Krasser, as part of the take-back process. ## Technical Data Bdsdpfozcunasx Afwog * Manufacturer: KRASSER GmbH, Austria * Type: Centurio 1250 * Year of Manufacture: 2020 * Machine Number: 098 / SCS * Power: 32 kW * Connection: 3 x 400–488 V AC, N + PE, 50–60 Hz * Weight: approx. 3,600 kg ## Equipment * 5 automatic knife pairs * Integrated guillotine shear * Leveling unit * Robust industrial design * High production output * Precise slitting results The KRASSER Centurio 1250 impresses with its high manufacturing quality, reliability, and economy. The extensive equipment enables efficient and precise processing of coil material while simultaneously reducing setup times. The machine is immediately available and ready for sale. Inspection is possible by appointment.

Year of construction: 2008, condition: ready for operation (used), functionality: fully functional, paper width (max.): 1,800 mm, Unwind diameter: 1,000 mm Rewind diameter: 800 mm Max. speed: 400 m/min Friction shafts for 3 and 6 inch Hydraulic lift at the unwind station Splicing table Bedpfx Afoywl D Nowodg Web edge control Tidland knife holders, 20 pieces Semi-automatic knife setting system from Tidland Recipe management Laser positioning We will also dismantle and load the machine onto a truck or sea container at our own expense.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: Nr/ 531, We offer this Concept Stal - CS-GPW cut-to-length and slitting line, as new, year of manufacture 2020. Manufacturer: Concept Stal Model: - CS-GPW Year: 2020 Condition: as new Category ID: 1043 Type ID: 1660 Type: Cut-to-length and slitting line If you have any questions or require further information, please send us a message or call us. The line consists of: 1. Sheet steel feeder stand, max coil weight 6000 kg 2. Working module 3. Guillotine 1250 mm 4. Sheet feeding and slitting module (roller blades) 5. Production table (automatic) 6. Product collection trolley 7. Protective film application module Bdedpfjyi U Ugox Afweg 8. Hydraulic-electric sheet coiling module 9. Compressor

Condition: excellent (used), functionality: fully functional, coil weight: 8 kg, sheet thickness (max.): 3 mm, sheet thickness steel (max.): 3 mm, total width: 1,250 mm, Slitting line for sale Bdsdpfx Afjv Twi Rewjg

Condition: good (used), Year of construction: 2023, functionality: fully functional, number of straightening rollers: 7, conveyor belt width: 1,250 mm, sheet thickness aluminum (max.): 2 mm, sheet thickness steel (max.): 15 mm, Automatic slitting system – Krasser Centurio (straightening, cross, and longitudinal slitting system) Automatic blade adjustment with 5 slitting blades for longitudinal slitting Automatic straightening unit with 7 rollers (reinforced) Bedpfxjziypbj Afwjdg Cross slitting using a table shear (reinforced beam shear) Max. cutting capacity: Steel 400N/mm2: 1.50 mm Stainless steel 550N/mm2: 1.00 mm Aluminum 190N/mm2: 2.00 mm The machine is currently located in Germany and can be inspected by arrangement.

Condition: used, Cut-to-length line Delta-Alcos 72”x0.5”x60,000Lb (A3770) Make: Delta / Alcos Material Width: 36" - 72" Thickness Capacity: .048" - .530" Weight Capacity: 60,000Lbs Coil ID: 16" - 24" Coil OD: 72" Yield Strength: 50,000PSI Direction: Right to Left Coil Storage Conveyor Entry Coil Car Hydraulic Lift and Traverse Cone Uncoiler DC Motorized Brake Sliding Base Wichita Cooled Brake Powered Hold-Down Roll Hydraulic Peeling Table Powered In & Out Set of Driven Pinch Rolls Delta Corrective Plate 4-Hi Leveler Number of Work Rolls: 9 Work Roll Diameter: 8" Work Roll Width: 82" Powered Up & Down Back-Up Flights DC Motor & Drive Delta Corrective 4-Hi Leveler Number of Work Rolls: 19 Work Roll Diameter: 4" Work Roll Width: 82" Motorized Back-Up Flights Powered Work Roll Adjustment DC Motor & Drive Alcos Mechanical Shear Down Cut Shear Driven Entry Pinch Rolls Pneumatic Clutch & Brake AC Motor Drive Alcos Drop Type Stacker 40' Sheet Length Driven Exit & End Conveyrors Touch Screen Digital Panel Operator Push Botton Station Digital Read Outs Hydraulics, Electrics, Controls, Presently Installed Bdjdpfxeixqg Ns Afwsg

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, working width: 1,250 mm, warranty duration: 12 months, number of feed rollers: 1, Demonstration Machine Slit Cut 1250 mm Manufacturer: CIDAN Forstner Year of manufacture: 2025 Motorized feed Longitudinal slitting with 5 pairs of knives with automatic infeed Crosscutting with rotary shear SPS1 control for automatic feed, longitudinal and crosscutting The Forstner SLIT longitudinal and crosscutting line is optimally suited for all sheet metal shops, drawing from years of experience. The system consists of a proven combination of traditional Forstner machines and can be combined with any manual or motorized decoiling unit. Key advantages: - The new design makes your SLIT line even better. - Now even more space-saving with the same strength. - LED slit knife illumination. - Table can be operated from both sides. - Simplest knife adjustment. Standard equipment: - Roller feeder hopper - Feeder table - 5 pairs of longitudinal knives - Crosscut rotary shear - SPS1 touch control - Speed: 25 m/min Cutting capacity in steel for longitudinal slitting: Bdodpfx Ajwy Hwpsfwjg - With 3 pairs of knives: 1.5 mm - With 4 pairs of knives: 1.25 mm - With 5 pairs of knives: 1.0 mm

Condition: like new (used), Year of construction: 2025, functionality: fully functional, FORSTNER nuSLIT longitudinal slitting and cut-to-length line, year 2025. The machine is in excellent condition and fully operational. It was used only at several exhibitions and in a demo center. The machine is designed for longitudinal slitting and sheet cutting operations. It is fully programmable, with automatic adjustment of the longitudinal slitting knives. Longitudinal slitting into 6 strips (5 pairs of knives) with the possibility to mount up to 7 pairs. Equipped with a modern F3 control system featuring a touchscreen interface, which allows easy programming of different lengths, widths, and quantities. The controller communicates with an electronic eye, automatically sets the zero point, and enables precise, clean perpendicular cuts. Integrated material-saving function – the machine stops, the slitting knives are raised, and the sheet is automatically fed into the shears. Bdodey Dfnnjpfx Afwjg Comes with complete technical documentation. Specification: Model: FORSTNER nuSLIT 1250 Made in: Austria Year: 2025 Working width: 1250 mm Max. thickness: up to 1.0 mm Longitudinal slitting knives: 5 pairs Cutting: rotary shears Controller: F3 Other features: automatically adjustable longitudinal slitting knives If you have any further questions, we will be happy to assist you.

Condition: used, Year of construction: 2018, functionality: fully functional, number of straightening rollers: 6, conveyor belt width: 1,300 mm, sheet thickness steel (max.): 1 mm, coil width: 1,250 mm, cutting length (max.): 6,400 mm, straightening roller diameter: 70 mm, space requirement width: 3,500 mm, space requirement length: 18,275 mm, space requirement height: 4,000 mm, Single-person operation, rapid access to a wide variety of sheets, automatic sheet changeover, standard sheets remain loaded in the system; the upper sheets are less common types; secure solution with a movable access aid for loading the upper decoilers; programmable slitting line with 8 pairs of knives in station version; slitting knives are alternately arranged for distortion-free cutting; rotary knives of the AL p with 100 mm diameter to achieve minimal incision; 7.2 m long conveyor belt for discharging the strips. The system layout PDF is shown as a mirror image! Bdodjxwc E Ispfx Afwsg

Year of construction: 1972, condition: good (used), strip width: max. 830 mm strip thickness: 0,3 - 4 mm blade shaft Ø: 140 mm Bdodpfx Afegrykhjweg No. of slits/material thickness: 25/0,5 mm 4/4 mm

Condition: like new (used), Year of construction: 2024, functionality: fully functional, Equipment: documentation/manual, KONICA MINOLTA ACCURIOLABEL 230 Digital Label Printing Press • Manufacturer: Konica Minolta • Model: AccurioLabel 230 • Year of manufacture: 2024 • Machine has been continuously maintained under a service contract _____ TECHNICAL SPECIFICATION Printing System • Digital toner-based label printing system • Resolution: 1,200 × 1,200 dpi × 8 bit • Equivalent image quality up to 1,200 × 3,600 dpi • Maximum print image size: 1,195 × 320 mm • Web width in present configuration: 325 – 333 mm Production Speeds Depending on substrate: • 23.4 m/min • 18.9 m/min • 13.5 m/min • 9.45 m/min The machine has mainly been operated at 13.5 m/min, as the current owner achieved the preferred print quality at this speed. All four production speed levels are available. _____ CONTROLLER • Konica Minolta IC-605B • Integrated controller • Operator screen • Direct PDF printing from USB stick possible • Patlite LR4-PP signal tower _____ UNWINDER / REWINDER The machine is supplied complete with: • Integrated BST web guiding system • BST web guiding at both winding units This provides stable and accurate web transport throughout the production process. _____ OVERPRINT EQUIPMENT The machine is equipped with: • Overprint Kit with impression / registration sensor This allows accurate overprinting onto previously conventionally printed label material, making the machine particularly interesting for hybrid production environments. _____ WEB CLEANING & STATIC CONTROL Bjdpfx Aszx Ri Dsfwedg Included: • Web cleaning system for AccurioLabel • Static Eliminator • SWG-400 antistatic brush These systems support clean substrate handling and reliable production, particularly when processing sensitive label materials. _____ SLITTING EQUIPMENT Included: • Longitudinal crush knife system • 3 pneumatic knives • Knife holders According to the present owner, this equipment has never been used. _____ COMPRESSED AIR EQUIPMENT Included:

Condition: used, Unwinding reel, reversing reel, LIV type O 2X20/360 H - DZ - AP Bdodpjzwz Sysfx Afwsg Double unwinding reel Manufacturer's No. 11154298, Year of manufacture 1998 Coil weight max. 2000 kg per side Coil width max. 360 mm Coil outer diameter max. 1200 mm Coil inner diameter approx. 350 - 450 mm Distance from center of reel shaft to floor 1200 mm Distance from center of reel shaft to reel base 1030 mm Hydraulic motor power 0.75 kW Mains connection 400 volts, 50 Hz - pneumatic disc brake for each side, separate - without drive for the reel core - hydraulic spreading of the reel core - pneumatic pressure arm with roller - reel structure can be manually rotated by 180° with locking positions - coil guide ring Ø 1240 mm, for lateral coil guidance - pivoting arm for mounting and dismounting the coil guide ring - electrical control for each coil side, separate Space requirement L x W x H 2050 x 1700 x 2350 mm Weight 1950 kg in good condition