Used Slot Milling Machine for sale (66,240)

Condition: not inspected (used), functionality: unexamined, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection either between 11/05/2026 and 13/05/2026, or between 18/05/2026 and 21/05/2026! TECHNICAL DETAILS Isdpfx Ajyn Ecxepcstf Dimensions & Weight Dimensions (L x W x H): 4000 x 1000 x 1600 mm Machine weight: 400 kg EQUIPMENT Support surfaces on the right and left External reference: Groven - Lot 8

Condition: new, Year of construction: 2025, Semiautomatic milling machine with four electrospindles for water slot MLA WS42 EVO, new Itsdpfx Ajwqlmdjpcjf

Condition: used, Table unit from a DROOP & REIN portal milling machine Clamping plate with T-slots made of cast steel gray cast iron Table unit with clamping plate and very solid guideway Table clamping surface 5500 x 2000 mm Travel of the table clamping plate approx. 3100 mm Table height 1050 mm Table load: max. 20 tons Ball screw: Ø 100 mm Thread pitch: 20 mm (single-start) - Processing table guided very stably on the bed - Metal telescopic guideway cover - comes from a DROOP & REIN portal milling machine - Longitudinal table movement via ball screw and SIEMENS servo motor Itodpfx Apsthuzpjcsf - Clamping surface with 11 T-slots 28 mm - Drive via SIEMENS 1FT6134-6AB71-1AG2 servo motor with IC200448S/R encoder (RN 000 B25) Total length 9500 mm Width 2000 mm Overall height 1050 mm dead weight 28 ton. good condition

Condition: used, Slotting head for milling machine, milling head, CCCP / UDSSR STANKO type 1502 No: 200 Year of manufacture 1974 Stroke size: max. 60 mm Stroke rate: approx. 200 - 500 strokes/min. Tool holder: 12 x 17 mm with clamping plate Itsdpfx Ajd Dk A Aopcef Hole spacing machine flange plate: 245 x 185 mm Mounting hole: Ø 17 mm Centering diameter on the machine flange plate: 190 mm - Stroke size adjustable via eccentric adjustment - The drive is like the normal vertical head from the machine gearbox - Drive via driver, centric in the centering diameter - Degree scaling on the flange plate +/- 45° steplessly pivotable - This grooving head is flange-mounted in place of the normal vertical milling head (mounting in place of the vertical milling head, milling head) Weight: 42 kg good condition Slotting head bearing number 58166 and vertical milling head bearing number 58164 from identical STANKO milling machine.

Condition: good (used), Year of construction: 1984, Water slot milling machine, water slot milling machine -Three-spindle -electropneumatic circuit Iedpfex R Sv Ssx Apcstf -pneumatic workpiece clamping -Fine adjustment via spindles and handwheels

Condition: new, Transportable and flexible table machine, mills a keyway for theSwallow sizes Wction:Adjust the stops to measure and insert the workpiece. When the handle is depressed, the workpiececurious, excited. At the same time, the milling group moves to the set milling depth. The milled part will be at start-upof the handle is released again, the motor switches off automatically. Finished!Technical specifications:Electrical connection values 1ph/N/PE 230 V 50/60Hz 1.0 kWMotor 1 x 1000WIdle speed 34000 ual controlWorkpiece clamping manuallyPassage height 130 mmMilling depth 0-85 mmSuction connection Ø 50 mmSwallow size W-0/1/2/3/4Dimensions W/D/H 740/650/835Weight 32kgOrder No. W1031000 Itedpfovwf Dkjx Apcsf

Condition: ready for operation (used), Year of construction: 1960, machine/vehicle number: 719, Manufacturer: Hurth Model : LF 00 Machine No. : 719 Year of manufacture : ca.1960 Weight: ca. 400 KG General / technical data: used horizontal grooving milling machine with crank gear controlled groove length adjustment and automatic depth adjustment groove width for cutter Ø: from 2 to 10mm length of grooves in one cut: from 0 to 60mm + cutter diameter Isdpfx Aeg Uq Dfspcstf 10 depth feeds feeds: 0,03 to 0,3 mm milling feed: 8 speeds of the milling carriage by crank stroke: 5,1 / 7,3 / 10,2 / 13,9 / 18,4 / 25,4 / 34,7 / 49,5 strokes/min spindle speeds: 4 pieces 970, 1370, 1950, and 2750 rpm table dimensions (rigid table): 160mm x 355mm table height adjustment: 40mm transversal movement of the table ( against the cutter ): 110mm power supply / spindle motor power: 380Volt 50 HZ / 0,8 KW / 920 1/min approx. space requirement of the machine: 670mm x 1100mm x 1200mm (bxtxh) Accessories / special equipment: Chip tray coolant device Machine documentation Remarks: The machine is in a condition corresponding to its age. The machine is preferably designed for production use in small and medium series. The machine has a simple crank gear adjustment to determine the length of the groove.

Condition: new, Centauro ALFA NC Machining Centre For Joinery Components & Doors A versatile and flexible NC controlled machining centre suitable for a variety of machining operations including hinge recessing, lock slots, handle holes, key slots and euro grooves etc. Programming is extremely simple thanks to the colour graphic touch screen controller using pre-installed electronic macros. As standard the machine can be equipped with one milling head that automatically moves for either vertical or horizontal machining. It also has interpolation of the axis. Optional additional machining operations include producing a square corner hinge plate recess or lock face recess by means of the additional milling unit. The operator simply selects in the program if they want a radius or square corner and the machine does the rest. In addition the same milling head can be used to make the small pilot hole for hinge screws etc. There is also the possibility to produce a square end tenon, round end tenon or dovetail / dovetail slot when the special front table is fitted. Lastly on request the machine can be configured to import ISO files from external design software (e.g ARTCAM Express) to enable detailed engraving of items such as name plates etc. Itedpsb Tmngsfx Apcjf Axis capacity - X 2800mm, Y 180mm, Z 150mm. (2400mm X capacity when optional drilling head fitted). 1 x ER32 collet for milling cutter 16mm max. dia. Max working table dimensions - 3000x618mm X axis positioning speed 35m/min. Y axis / Z axis positioning speed 6m/min. Retractable pneumatic positioning stops 2 off - on front of table Adjustable pneumatic workpiece clamps x 3 - mounted on rear of table. Left hand side ref. stop. Front table extension supports x 2 Router motor power 3.3kw. Router motor RPM 0-18,000 rpm. Touch screen controller - Elco Power 1000. Dust extraction outlet x 1 80mm dia, 2 x 100mm dia CE side and rear safety guards with front light curtain.

Condition: used, Universal milling machine table, angle table, setup angle, clamping table, presumed MAHO make T-slot table, add-on table for universal tool milling machine Table no.: 76-400-1 / 2210 05 00 Table size: 700 x 330 mm Overall height: 210 mm T-slot width: 12 mm Iedpfx Aexy Styjpcjtf T-slot pitch: 45 mm - Table plate with 7x T-slots, 12 mm each - Mounting surface 90°, 13 mm diameter holes, 14 mm elongated holes for fastening and 12 mm guide slot - Hole spacing, top mounting plate Ø 13 mm = 500 mm, 50 mm from the table surface (measured at center) - Hole spacing, middle mounting plate Ø 13 mm = 472 mm, 95 mm from the table surface (measured at center) - Elongated hole spacing, middle mounting plate = 475 mm, 140 mm from the table surface (measured at center) - Elongated hole spacing, bottom mounting plate = 475 mm, 185 mm from the table surface (measured at center) Dimensions (L x W x H): 820 x 330 x 210 mm Weight: 61 kg In good condition

Condition: used, Slotting head, suitable for DECKEL type FP 2 milling machine Manufacturer No. 2211 / 1895 Dovetail width: approx. 76 - 88 mm Dovetail height: approx. 14.5 mm Dovetail length: 320 mm Dovetail leading edge to gear center: approx. 235 mm Stroke size: max. 80 mm Stroke rate: max. 210 double strokes/min. Tool holder: square, 16 x 16 mm with clamping plate - Stroke size adjustable via eccentric adjustment - Driven by the machine gear, within the dovetail guide (as with a normal vertical head) - This slotting head is inserted into the dovetail guide in place of the normal vertical milling head (Mounted in place of the vertical milling head, milling head) - Drive gear in the slotting head, 39 teeth, gear width 16 mm, presumably 20° pressure angle - Slotting head on the flange plate can be rotated 360°, degree scale +/- 35° Weight: 32 kg Very good condition Ijdowbi Rbspfx Apcstf DECKEL FP1 has a pressure angle of 15° on the drive gear DECKEL FP2 + FP3 - has a pressure angle of 20° on the drive gear

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 06651, travel distance X-axis: 6,800 mm, travel distance Y-axis: 3,700 mm, travel distance Z-axis: 1,500 mm, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 10 m/min, total length: 15,000 mm, total width: 7,500 mm, spindle speed (max.): 4,000 rpm, total height: 7,000 mm, table height: 1,100 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 10 m/min, distance between stands: 3,300 mm, type of input current: three-phase, table load: 50,000 kg, rotational speed (max.): 4,000 rpm, distance table center to spindle nose: 2,110 mm, overall weight: 110,000 kg, spindle motor power: 50,000 W, control cabinet length: 7,000 mm, control cabinet height: 2,000 mm, control cabinet width: 600 mm, Equipment: rotational speed infinitely variable, MODEL: Portal Type AGE: 1992 S/N #: 06651 CATEGORY: Mills, Planer Type, CNC CAPACITY: X-Axis Travel: 6800 mm Y-Axis Head Travel: 3700 mm Z-Axis Ram Stroke: 1500 mm, fixed crossrail Ram Cross Section: 500 mm x 500 mm Distance Between Columns: 3300 mm Distance Table To Ram Face: 2110 mm, vertical passage 2000 mm Table Size: 6000 x 2500 mm Spindle (Quill) Diameter: 250 mm Spindle Taper: ISO #50 Spindle Speeds: 0-4000 RPM Spindle Motor: 50 KW EQUIPPED WITH: FIDIA System C20 CNC Control, new in 2002 Iedoyahv Sspfx Apcstf CNC biaxial continous milling head Universal Milling Head with Auto Indexing Right Angle Head with Auto Indexing Straight Milling Head Wagons for Head Change and Tool Pick-up Change Hydrostatic Bearings Coolant System Full Length Chip Conveyors both side Way Covers Rapid movements: Z-10.000 mm/min, X and Y-15.000 mm/min Table load: max 50.000 kg Weight of the machine: 110.000 kg Outside dimensions: 15.000 x 7.500 x 7050 mm Machine has been tested before dismantling and is fully operational, all mechanical components in excellent condition, electrics new in 2018. Machine available from stock. The price is now SPECIAL FROM STOCK. Once we will reassemble the machine, price will grow significantly. We can assist you to assemble and run up the machine.

Condition: excellent (used), Year of construction: 2021, XYZ RMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK RMX Control YOM 2021 Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar YOM 2021 For Sale with Jet Machinery Ltd Jet Machinery Stock Number: #78900 Machine Serial Number: RM310097 £35,000.00 + VAT Ijdpfx Aex D Tbmepcjtf Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2017, XYZ 2000 Turret Milling Machine (2017) (Ex College) 3 Axis Newhall DRO (X, Y & Knee) Spindle Taper R8 Spindle speeds to 500 – 4200 rev/min Table Size 1270 x 254mm Table Travel: X - 812mm Y - 406mm Knee Travel: Z - 406mm Quill Travel Z - 127mm Iedpfexxb Rrox Apcstf For sale with Jet Machinery Ltd Jet Machinery Stock No: #79047 Machine Serial Number: 12907 Cost: £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Year of construction: 2019, condition: not inspected (used), functionality: unexamined, travel distance X-axis: 300 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 150 mm, machine/vehicle number: 24952, No reserve price – guaranteed sale to the highest bidder! Iodpfx Apsyniuxocotf By placing a bid, you commit to timely collection either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026! TECHNICAL DETAILS Travel X-axis: approx. 300 mm Travel Y-axis: approx. 450 mm Travel Z-axis: approx. 150 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,300 x 800 x 1,500 mm Machine weight: 150 kg EQUIPMENT STEPCRAFT MM1000 milling unit External reference: Lot 64 / Wittner

Condition: ready for operation (used), functionality: fully functional, No reserve price – guaranteed sale to the highest bidder! Itedpfoym Ak Dex Apcsf Placing a bid obliges you to collect the item within the specified time frame: either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026. TECHNICAL DETAILS Travel X: 190 mm Travel Y: 140 mm Travel Z: 260 mm Tool holder: SK 30 (presumably) Maximum tool clamping length: 35 mm Table dimensions: 420 x 120 mm Jaw width: 60 mm MACHINE DETAILS Control: EMCO EASY 2 CONTROL (HEIDENHAIN TNC 640, SIEMENS SINUMERIC 840) Operating voltage: 230 V Frequency: 50 – 60 Hz Rated current: 2.8 A EQUIPMENT Special machine vice: EMCO vice with 2 slots Mobile workbench: incl. various suitable contents Tool changer: 7 positions Collets Various suitable tool holders Note: An identical machine with the same specifications will be delivered, but not necessarily the exact unit shown in the photos.

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,750 mm, travel distance Z-axis: 1,000 mm, controller model: Siemens NCU 840 W Serie 2, number of axes: 5, TECHNICAL DETAILS Travel X-axis: 2,500 mm Travel Y-axis: 1,750 mm Travel Z-axis: 1,000 mm A-axis: 20 arcseconds C-axis: 30 arcseconds Rapid traverse X-axis: 17 m/min Rapid traverse Y-axis: 17 m/min Rapid traverse Z-axis: 10 m/min Rapid traverse A-axis: 9 rpm Rapid traverse C-axis: 80 rpm Infinitely variable feed X and Y axes: up to 15,000 mm/min Feed Z-axis: up to 4,000 mm/min Table plate: St 52-3 Table dimensions (L x W): 3,631 x 1,200 mm Milling head: FK 115 - SK40 Speed: 14–1,000 rpm Bearing: A9 LC8 CNC A-axis: spindle swivel axis A-axis Swivel angle: ±120 degrees Torque: 450 Nm Speed: 8 rpm Resolution: 20 arcseconds Clamping: hydraulic C-axis Rotation angle: 365 degrees Torque: 580 Nm Speed: max. 8 rpm Resolution: 30 arcseconds Clamping: hydraulic MACHINE DETAILS Control: Siemens NCU 840 W Series 2 CNC controlled axes: 5 Voltage: 400 V 50 Hz Power: approx. 35 kW Weight: 18,500 kg EQUIPMENT Swarf conveyor Sliding door Side window Tool changer stationary at center of machine/ rear crossbeam Disc magazine with 16 stations SK40 Heidenhain length measuring system Iedpsyz Abtofx Apcjtf Note: The seller can arrange an external service provider for the removal of the machine.

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 111146, travel distance X-axis: 1,100 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, rotational speed (max.): 10,000 rpm, controller model: Heidenhain 530, TECHNICAL DETAILS Travel X-axis: 1,100 mm Travel Y-axis: 610 mm Travel Z-axis: 610 mm Spindle nose to table: 120–730 mm Machine table: 1,250 x 610 mm T-slots in table: 5 T-slot width: 18 mm T-slot spacing: 100 mm Spindle speed: 60–10,000 rpm Torque: 332 Nm Power: 13 kW Spindle cooling: Oil-cooled Rapid traverse X/Y/Z: 32 m/min Feed rate: 1–12,000 mm/min Positioning accuracy: ±0.005 mm Repeatability: ±0.003 mm Tool holder: SK40 Pull stud: DIN 69871/72 Tool changer: 30 stations Tool-to-tool change time: 1.5 s Tool weight: max. 7 kg Tool diameter: max. 76 mm Tool diameter with adjacent station free: max. 140 mm Tool length: max. 300 mm MACHINE DETAILS Control: Heidenhain 530 Compressed air: 3/8", 6–8 bar Power supply: 400 V / 75 A / 35 kVA Hydraulic oil: R32 (ISO 32) Central lubrication: R68 (ISO 68) Coolant tank: 250 l Guides X/Y/Z: Linear 45/45/45 mm Machine bed: Cast iron Machine weight: 7,500 kg EQUIPMENT IKZ 22 bar (internal coolant supply) Tool changer with 30 stations Oil-cooled spindle Central lubrication Coolant tank Ijdpfjyzxz Nsx Apcjtf Linear guides X/Y/Z Chip conveyor Handwheel Note: The machine is sold without tools and vise.

Condition: used, Year of construction: 1971, hobbing length 1750 mm milling width 260 mm max. module 10 table size incl. water gutter 460 x 2100 mm table clamping surface: 250 x 1850 mm cutter width - max. 100 mm feed of the milling slide, stepless 0 - 500 mm/min. rapid traverse feeds 3000 mm/min milling head -swivable +/- 30 ° Rotation speed range of milling head, in 9 steps 29 - 178 rpm Milling head swivable 2 sides helical gearcutting 30 ° total power requirement 4 kW weight of the machine ca. 4 t dimensions of the machine ca. 4 x 1,85 x 1,85 m Milling length 1750 mm Milling width 260 mm Module - max. 10 Table dimensions incl. water channel 460 x 2100 mm Table clamping surface: 250 x 1850 mm Milling cutter width - max. 100 mm Feed of the milling carriage, infinitely variable 0 - 500 mm/min. Rapid traverse 3000 mm/min Milling head - tiltable + / - 30 ° Speed range of the milling spindle, in 9 steps 29 - 178 rpm Milling head swivels on both sides for helical gearing 30 ° Machine weight approx. 4 t Space requirement approx. 4 x 1.85 x 1.85 m Equipment/accessories - 7 vices Ijdpfx Ajy Ayrrepcetf - change wheels - Clamping devices - documentation

Condition: used, Year of construction: 1988, x-travel 870 mm y-travel 370 mm z-travel 400 mm table-size 310 x 1370 mm distance vertical spindle / table 50 - 450 mm feed - longitudinal/cross 20 - 800 mm/min 9 - 355 mm/min rapid traverse longitudinal and cross 3000 / 1375 mm/min spindle taper SK 50 spindle turning speed range 40 - 1750 U/min spindle speed: 12 Stück Itodpoxlkw Usfx Apcsf total power requirement 5,5 kW weight of the machine ca. 2,4 t dimensions of the machine ca. 1,9 x 2,0 x 1,5 m - Powerful CNC universal milling machine - Includes Fanuc control system - Kneading milling head - Automatic feeds on X/Z/Y axes - Central lubrication system - Coolant system - Pivoting machine light - Splash guard tray - Separate transformer

Condition: used, Year of construction: 1998, functionality: fully functional, machine/vehicle number: 80317, travel distance X-axis: 4,400 mm, travel distance Y-axis: 2,300 mm, travel distance Z-axis: 235 mm, input voltage: 380 V, Machine full working order use every week Itedpfsy Au Rpex Apcof

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, TABLE Surface (mm): 1400×1200 T-slot / Width / Distance (mm): 9(11) / 22 / 125 Max permissible load (kg): 8000 Auto indexing, continuous (°): 0.001 TRAVEL Longitudinal (mm): 2500 / 3000 / 4000 Cross (mm): 1050 / 1250 (with flat ram) 1000 / 1250 (without flat ram) Vertical (mm): 1450 FEED Axis feed (mm/min): 5000 Rapid traverse (mm/min): 12000 (X, Y) Itsdjyfmtaepfx Apcjf 10000 (Z) 6 (C) Drive motor (Nm): T1400×1200: 50 (X), 27 (Y, Z), 50 (C) SPINDLE Taper: ISO50 Speed (rpm): 4000 2-step: 0–1000 / 1001–4000 Drive motor (kW): 28 / 38 WEIGHT Machine weight (kg): 30000

Condition: used, Year of construction: 2008, operating hours: 16,772 h, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,500 mm, position of the milling head: Automatico 2,5ºx2,5º, spindle speed (max.): 4,000 rpm, table width: 1,000 mm, table load: 10,000 kg, table length: 4,200 mm, total height: 4,000 mm, total width: 3,500 mm, total length: 10,000 mm, overall weight: 21,900 kg, Milling machine LAGUN GBM42 Itsdpoyiu Rnjfx Apcef

Condition: like new (used), Year of construction: 2001, operating hours: 20,000 h, functionality: fully functional, travel distance X-axis: 8,000 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 2,500 mm, position of the milling head: 0,001, rapid traverse X-axis: 10,000 m/min, rapid traverse Y-axis: 15,000 m/min, rapid traverse Z-axis: 15,000 m/min, spindle speed (max.): 3,000 rpm, table length: 9,000 mm, table width: 1,500 mm, year of last overhaul: 2025, ZAYER 30KCU 8000 Milling Machine Ijdpfxoyivdvs Apcetf Travel: 8000x1250x2500 mm Heidenhain 430 CNC 45° Head, 6000 rpm, thousandth precision Direct output head, 6000 rpm Fixed table, 9000 mm 60-tool magazine Chip extractor Rotary table 2000x2000 mm

Condition: excellent (used), fuel type: diesel, color: yellow, first registration: 01/2018, Year of construction: 2018, Drive: Track Unladen weight: 30,000 kg Technical condition: very good Visual condition: very good Price: On request CATERPILLAR PM 622 ASPHALT MILLING MACHINE 4 x track drive Working width: 2235 mm Working depth: 0-330 mm 193 milling picks Hydraulically foldable discharge conveyor CAT Grade Control automatic levelling 2 x operator consoles with LC display Hydraulically liftable side plates Rear-view camera Weather protection roof, foldable Iedpfsuxu Eqjx Apcetf Driver's seats Work lights Cleaning system CAT Diesel engine, C18 622 HP Original paint FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN WE SPEAK ENGLISH HABLAMOS ESPAÑOL

Condition: ready for operation (used), Year of construction: 1988, feed length X-axis: 1,500 mm, feed length Y-axis: 700 mm, feed length Z-axis: 550 mm, spindle speed (max.): 2,066 rpm, table length: 2,000 mm, table width: 460 mm, rotational speed (max.): 2,066 rpm, overall weight: 4,000 kg, Heidenhain visual display, 3 axes feed variator automatic clamping head maximum spindle speed 2066 rpm table 2000x460 mm travels 1500x700x550 mm weight 4000 kg Itsdpfx Asy Dq Efepcof