Used Smg Ds 40 for sale (23,315)

Year of construction: 1978, condition: used, pressure 40 t Bwsdpjq Rhkwefx Abler distance between columns 600 mm stroke 150 mm table surface area 600x410 mm ram surface 220x130 mm table height 850 mm weight of the machine ca. 2,5 t

Year of construction: 1978, condition: used, pressure 25 t distance between columns 580 mm stroke 150 mm Bwjdpfx Abelp U Arjlsr dayligth 370 mm table surface area 560x400 mm ram surface 400x350 mm hole in the table 80 mm weight of the machine ca. 2,5 t dimensions of the machine ca. 1500x500x2500 m

Year of construction: 1999, condition: ready for operation (used), A direct warping machine Karl Mayer is available. Working width: 42inch, yarn feeding: NC. Including memory, roller unit and all reeds. Without creel. An inspection on site is possible. Bjdpfx Asyz Apkjblswr

Year of construction: 2014, condition: new, Double-disc grinding machine REMA DS 40/400 Bwodpfx Aogkrxcsblor Motor: 3 kW plus four boxes of grinding discs.

Condition: good (used), functionality: fully functional, Original CNC (not a retrofit from conventional to CNC) Control: Siemens 8-M Faceplate diameter: 3500 mm Max. turning diameter: 4000 mm Max. turning height: 2500 mm Vertical stroke of ram: 1600 mm Bjdpoxyh Hvefx Ablswr Horizontal stroke of ram: 2200 mm Ram cross-section: 250 x 210 mm Min. internal diameter: 360 mm Vertical travel of cross-slide: 2000 mm/min Chuck motor power: 71 kW Chuck speed: up to 90 rpm (2-speed gearbox) Table load capacity: 40 tons Feed rate: 1000 mm/min Rapid traverse: 6000 mm/min

Condition: excellent (used), For sale: a Getriebebau NORD gearmotor with a worm gear and a three-phase motor. The unit is fully functional, tested, and ready for operation. The technical condition is very good, with normal signs of wear and tear resulting from use. This gearmotor is ideally suited for driving conveyors, feeders, industrial machinery, mixers, and other devices requiring high torque at low speeds. Bwedpfsznk U Ejx Abler Technical data: Gear manufacturer: Getriebebau NORD Gear type: 1S50VZ.71 L/4 Gear ratio: i = 35.00 Output speed: 40 rpm Motor manufacturer: NORD Motor type: SK 71L/4 Power: 0.37 kW Supply voltage: 230/400 V Δ/Y (50 Hz) 265/460 V Δ/Y (60 Hz) Motor speed: 1360 rpm (50 Hz) 1630 rpm (60 Hz) Protection class: IP55 Insulation class: F Operating mode: S1

Condition: used, Year of construction: 1989, Pressure total: 1400 ton Stroke: 950 mm Daylight: 2000 mm Table surface area : 3600 x 2500 mm Slide area: 3600 x 2500 mm Die cushion capacity in table: 400 ton Die cushion stroke: 500 mm Bsdpfxouqdi Us Ablewr Die cushion pad area: 3060 x 1860 mm Approach speed: 400 mm / sec Working speed: 40 / 80 mm / sec Return speed: 400 mm / sec Oil volume: 5000 l Required power: 450 kW Weight of machine approx.: 240 ton Standard configuration with hydraulic tool clamps on the ram

Condition: good (used), axle configuration: 3 axles, first registration: 02/2005, total length: 13,600 mm, suspension: air, tire condition: 50 %, color: other, Year of construction: 2005, Equipment: ABS, = Additional options and accessories = - air suspension Bodpfx Abeza Diuslewr - Disc brakes = More information = Tyre profile: 50% Brakes: disc brakes Suspension: air suspension Technical condition: good Visual appearance: good

Condition: good (used), functionality: fully functional, REF: MM6465 1 x OK International Group SuperSealer continuous band sealer on mobile height adjustable stand. Manufacturer - OK International Group. Bjdpoznux Uefx Ablewr Model - SB-40 EU. Serial number - 218-2527-22. Speed - variable, up to 21.3 m/m. Bag material - Heat sealable materials up to 15 mils or 380 microns. Direction - Right to Left. PLEASE NOTE - There are 2 x units available for sale (4,800 EUROS/unit).

Condition: used, empty load weight: 8,910 kg, maximum load weight: 30,090 kg, overall weight: 39,000 kg, first registration: 04/2025, loading space length: 13,400 mm, loading space width: 2,500 mm, loading space height: 2,650 mm, loading space volume: 88 m³, suspension: air, color: other, gearing type: other, driver cabin: other, emission class: none, Equipment: ABS, cooling unit, electronic stability program (ESP), NEW!!! Schmitz deep-freeze trailer with Thermo King refrigeration - Refrigeration unit: Thermo King Advancer a400 - 13.40 x 2.50 x 2.65 m - Double deck - Flower width - Power connection - Disc brakes - Temperature recorder - Schmitz axles - Lift axle - 4x pallet box - aluminum floor - FRC 2030 - tires: 385/65/22,5 NEW! Net export price! NEW!!! Schmitz deep-freeze trailers with Thermo King refrigeration - Refrigeration unit: Thermo King Advancer a400 - 13.40 x 2.50 x 2.65 m - Double deck - Blummen width - Power connection - Disc brakes - Temperature recorder - Schmitz axles - Lift axle - 4x pallet box Bodpfxjvihz As Ablswr - Aluminum floor - FRC 2030 - Tyres: 385/65/22.5 NEW! Net export price! NOUVEAU !!! Schmitz semi-remorque frigorifique avec réfrigération Thermo King - Groupe frigorifique : Thermo King Advancer a400 - 13,40 x 2,50 x 2,65 m - double étage - Largeur de la fleur - Raccordement électrique - Freins à disques - Enregistreur de température - Essieux Schmitz - Relevant food - 4x caisses-palettes - Plancher en aluminum - FRC 2030 - Pneus : 385/65/22,5 NOUVEAU ! Prix net export ! Yourtrucks Group The Yourtrucks Group maintains business relationships around the globe. Both purchasing and sales extend beyond national borders, which is why you will always find the export price in our advertisements, as this is independent of the place of use. Yourtrucks GmbH compiles the content of this website with the utmost care and ensures that it is regularly updated. This information is to be regarded as non-binding general information and is no substitute for detailed individual advice when making a purchase decision. Only the provisions contained in the purchase contract are decisive. Subject to changes, errors, typing errors and prior sale. Our general terms and conditions apply exclusively. Languages - We speak english - On parle francais - ?? ????? ?? ????? - Mówimy po polsku - Hablamos español - Falamos português - Parliamo italiano

Year of construction: 2014, operating hours: 7,500 h, condition: used, Field of application: Construction Please contact Mohamad Fattah Ahmad for more information BAUER MC 96 BAUER HDS 100 BAUER BC 40 More informations on require! Bjdpfjh Tyzfox Ablewr

Condition: excellent (used), Catalog number: 8053 TECHNICAL DATA - Shaft width: 410mm - Noise-reducing comb - Number of knives: 4 pcs - Table length: 2000mm - Cast iron tables - Both tables are adjustable - Original, adjustable angled guide - Motor: 4kW - Dimensions (L/W/H): 2000x900x1300mm - Weight: 610kg ADVANTAGES - Made in Poland - Top control panel - 4-knife shaft Bwedpfxsznktho Ablsr - Used jointer - Very good condition Net price: 6900 PLN Net price: 1643 EUR, depending on the exchange rate of 4.20 EUR (Prices may vary due to exchange rate fluctuations)

Year of construction: 1991, operating hours: 19,888 h, condition: used, - Year: 1991 - Documentation available: No - CE certificate present: No - Serial number: 1844 - Operating hours: 19888 - Control: CNC Financial information Bsdpfx Abjzldwbsljwr VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,810 kg, maximum load weight: 34,190 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 12,660 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Chassis for semi-trailer containers Fine-grained steel welded construction, semi-trailer plate with replaceable kingpins Container mounts: 1 x 40-foot with gooseneck tunnel Transport of filled tank containers is not permitted. Without rear height adjustment and without foldable center supports, transport of containers without a tunnel is not possible. Front container guide, plug-in type 24-ton, 2-speed support jack, single-sided operation, with straight lower section, without thrust compensation Wheel chocks with holders Aluminum side impact protection Galvanized steel underrun protection Half-shell fenders With anti-spray flaps per EC Rear bumper Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-measured to reduce tire wear and fuel consumption Offset wheelbase mm (combined transport) up to 44-ton gross train weight Air suspension 1st axle: automatic lift axle, including forced lowering and start-up assist, operated by 3 brakes (start-up assist is functional up to a 30% axle load exceedance and up to a maximum speed of 25 km/h) Brake system 2-line air brake system; color-coded lines for easy servicing. Spring-loaded parking brake EBS, Electronic Braking System with front EBS socket, without connecting cable Warning: The trailer may only be towed by vehicles that ensure the effectiveness of the ABS! With lift & lower valve Vehicle stability control system Axle load detection via EBS CAN bus signal, for display in the cab; truck must be equipped accordingly; no truck installation required. Wheels and tires 385/55 R22.5, brand selected by the manufacturer Steel rims, factory silver Electrical System 24 volts, multi-chamber lights, LED taillights and brake lights, yellow LED side lighting 2 white front position lights 2 white/red rear lane-marking lights 1 x 15-pin socket at the front, without connecting cable LED work lights on both sides (activated via reverse light) Additional LED work light(s) at the rear, activated via reverse light Operating Instructions The specified gross weight is technically possible; however, depending on the load, the gross weight may not be achieved while complying with the permissible axle, support, and fifth-wheel loads Special permit required if the total train length exceeds 16,500 mm Caution: Transport of filled tank containers is prohibited! Country of registration/plates Germany With DEKRA approval and certificate (per §13 EC - FGV) Bwjdpjzlkgcsfx Ablor Prepared for single-line license plate holder Warning sign per ECE - 70 Contour marking with reflective strips per ECE R 048, white on the sides and red at the rear Paint finish Frame DB 7350 Novagrau *10-year warranty against rust-through* or hot-dip galvanized *15-year warranty against rust-through* Support legs black coated Customized transport solution Configure your Fliegl vehicle to meet your requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications.

Condition: excellent (used), Catalogue number 7835 TECHNICAL DATA - Shaft width: 410 mm - Noise-dampening comb - Number of knives: 4 pcs - Table length: 2500 mm - Cast iron tables - Both tables adjustable Bwedpfx Abszkrvcjler - Original angle-adjustable guide fence - Motor: 4 kW - Electric brake - Extraction port diameter: 125 mm - Dimensions (L/W/H): 2500x820x1210 mm - Weight: 910 kg ADVANTAGES – Made in Poland – Top control panel – 4-knife cutter block – Used jointer – Very good condition Net price: 15,900 PLN Net price: 3,790 EUR (depending on an exchange rate of 4.2 EUR) (Prices may vary with significant exchange fluctuations)

Condition: excellent (used), Catalogue number 7736 TECHNICAL DATA - shaft width: 410mm Bwsdpfezkrqgox Ablsr - number of knives: 4 - noise-damping comb at the shaft - table length: 2530mm - brake - cast iron tables - both tables adjustable - original, angle-adjustable guide - motor: 3kW - extraction port diameter: 140mm - dimensions L/W/H: 2530x850x1350mm - weight: 680kg ADVANTAGES – manufactured in Poland – 4-knife shaft – brake – upper control panel – noise-damping comb at the shaft – DTR documentation – used jointer, in very good condition Net price: 12,900 PLN Net price: 3,070 EUR depending on 4.2 EUR rate (Prices may vary with significant exchange rate fluctuations)

Condition: good (used), Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Festo type: DSW-40-600 PPV-A -Piston: Ø 40 mm -Stroke: 600 mm -Max. Pressure: 10 bar Bwjdpfx Abod Sti Dslsr -Price: per piece -Number: 4 pieces -Dimensions: Ø 46 x 800 mm -Weight: 2.15 kg

Condition: good (used), Electric motor, three-phase motor, brake motor -Manufacturer: SSB Antriebstechnik, electric motor with brake -Type: DS-0410.408.50-K1-B14 -Power: 0.55 kW -Speed: 1350 rpm -Brake: 5 Nm -Shaft: Ø 19 x 40 mm -Design: B14 -Protection class: IP 54 -Quantity: 1x motor available -Dimensions: 345/215/H160 mm Bwedpfxsy D Imtj Abljr -Weight: 16.3 kg

Condition: good (used), Pneumatic cylinder, air cylinder, pneumatic piston, air piston Bwsdpfxexwkvue Abler -Manufacturer: Festo, standard cylinder type DSBC-40-320-C-PPVA -Stroke travel: 320 mm -Piston: Ø 40 mm -Piston rod: Ø 16 mm -Hole: Ø 12 mm -Max. pressure: 12 bar -Number: 4 cylinders available -Price: per piece -Dimensions: 580/55/H130 mm -Weight: 2.6 kg/pc.

Condition: good (used), Pneumatic cylinder, air cylinder, pneumatic piston, air piston -Manufacturer: Festo, standard cylinder type DSBC-40-20-PPVA 2123166 -Stroke travel: 20 mm -Piston: Ø 40 mm -Piston rod: Ø 16 mm / M12 Bwodpfxexwvp Tj Abler -Max. pressure: 12 bar -Number: 16 cylinders available -Price: per piece -Dimensions: 180/55/H55 mm -Weight: 2.6 kg/pc.

Condition: good (used), Year of construction: 2006, Control cabinet - cooling unit, control cabinet air conditioning unit, distribution cabinet, heat exchanger, control cabinet cooler Bjdpfx Asvw Rzuoblowr -Switch cabinet cooling unit: from vertical lathe Scherer VDZ 80 DS -Type: K0154009 SK23 259603 -Dimensions: 950/215/H400 mm -Weight: 40 kg

Condition: good (used), functionality: fully functional, Year of construction: 2016, machine/vehicle number: 1930036, operating hours: 6,900 h, This is a used twin-screw extruder for processing moist materials. (A complete overhaul is included in the price and will be carried out by Brabender/now Anton Paar.) The machine was used to produce textured soy protein in a purely vegan facility. The textured soy protein is moist, and it was used to produce vegan products such as "cutlets," "fish," "nuggets," "bacon," etc. Bedpfxjzhnluo Ablewr

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 5,600 kg, maximum load weight: 32,400 kg, overall weight: 38,000 kg, axle configuration: 3 axles, loading space height: 1,295 mm, total length: 12,900 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22.5", tire condition: 100 %, Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer requirements. Chassis, saddle, container Fine-grain steel welded construction, saddle plate with 2 replaceable kingpins and 2 kingpin positions Front locking mechanism on the tipper ram mounting bracket with lateral locking Tapered locking wedges, rear locking mechanism on a continuous pivot shaft with return spring Without subframe for self-supporting containers Container mounts: Locking crossmember, 2-fold for locking 1 x 30 ft or 1 x 40 ft container. Adjustment via central telescope as an interlocking central tube frame with bolt lock. Optimal saddle load when transporting 30 ft and 40 ft containers. 24 tons, 2-speed support winch, single-sided operation, with straight lower part, without thrust compensation 2 support wedges with holder Aluminum side impact protection Galvanized steel underrun protection Half-shell fenders with anti-spray flaps according to EC Hydraulics 100 low-pressure cylinder, max. 150 bar, with HDK screw connection, fixed part, NW 48 mm. (without hose connection) Bedpsi Riv Eofx Ablswr Operation hydraulically via truck auxiliary drive, included. Hydraulic connection with hose and HDK screw connector NW = 48 mm with knurled nut Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-aligned, reduces tire wear and fuel consumption Axle spacing offset mm (combined transport) up to 44 tons total weight Air suspension Braking system 170 2-line compressed air braking system Color-coded line routing for easy service. Spring-loaded parking brake Tele Control Axle load adjustment for easy telescoping 2 fail-safe coupling heads at the front, without connection cable EBS, electronic braking system with EBS socket at the front, without connection cable Note: The trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS! with lifting and lowering valve Vehicle - driving stability system Axle load recognition via EBS-CAN bus signal, for display on the display in the driver's cab, the truck must be prepared accordingly Wheels and tires 385/65 R22.5, manufacturer at the manufacturer's choice Steel rims, factory silver Electrical system 24 volts, multi-chamber lights, yellow LED lighting on the side 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pole fail-safe sockets at the front, without connection cable 2 additional LED work lights at the rear, switched via reversing light Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer requirements.

Condition: ready for operation (used), Rexroth 3 DS 2 EH 10-20/A2X 40 Z8 servo-pressure control valve, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Bedpfxsi Ecn Uo Ablewr

Condition: new, Manufacturer: SBA TrafoTech GmbH Type: DS-UL-G140 Device type: Three-phase autotransformer Frequency: 50–60 Hz Protection class: I Degree of protection: IP23 Insulation class: B/F Maximum ambient temperature: 40 °C Bwjdpfezcgy Iox Ablor Design: UL-compliant transformer series DS-UL-G140