Used Smt L Plus for sale (69,595)

Year of construction: 2018, condition: used, Operational machine with maintenance history. Ask for additional information! Laedsyxfzkopfx Amzoh

Year of construction: 2017, condition: ready for operation (used), Reflow oven in operational condition. Ask for additional information. Ledpfow Hfp Rex Amzsah Located within EU.

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, L&Z Lathe KMUTH BASIC Plus incl. 3-axis digital display - Year of manufacture 2011 - CE marking - Three-axis digital display - Center height 150mm - Max. turning diameter 300mm - Max. turning diameter over support 178mm - Max. turning diameter without bridge 430mm - Center distance 810mm - Spindle bore 38mm - Spindle speeds (geared) 60 - 1550 rpm (9 steps) - Automatic longitudinal / facing feeds - Spindle mount - Camlock D1 - 4" - Tailstock taper MK 3 - Quill travel 100mm - Bed width 180mm - Multifix base with insert Laodpfx Amsz Hwx Eszoh - Electric chuck guard - Work light - Coaxial center - 3-jaw chuck - 2 x steady rests - Documentation Dimensions: L x W x H 1.6 x 0.7 x 1.6 meters / Weight 550 kg Errors and omissions excepted.

Condition: ready for operation (used), Year of construction: 2005, operating hours: 15,202 h, laser power: 2,700 W, travel distance X-axis: 2,500 mm, number of axes: 3, This 3-axis TRUMPF TRUMATIC L 2530 Plus was manufactured in 2005 and will come with a Storemaster. It features a powerful 2700 W laser and includes advanced equipment such as a laser cutting head with 3.75" and 7.5" lenses, automatic sheet edge detection, and programmable cutting gas selection. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF TRUMATIC L 2530 Plus CO2 laser cutting machine we have for sale. Contact us for further details. Laodpfsz R Aa Rex Amzeh - Mains Supply: 400 V / 50 Hz- Connected Load: 63 kVA- Control Voltage: 24 V =- Required Fuse Protection: 3x 100 A- Compressed Air Connection: 7-10 bar- Nitrogen Connection (N2): 30 bar- Oxygen Connection (O2): 16 bar- Standard Equipment: Hi-Las high-pressure cutting, Laser cutting head with 3.75" lens, Laser cutting head with 7.5" lens, Cutting head quick-change device, Automatic sheet outer edge detection, Positioning laser diode, Programmable cutting gas selection/pressure setting, Microweld, SprintLas, Capacitive height control (DIAS III), ContourLas, AutoLas Plus, Oil spray device, Automatic pallet changer, Working area lighting, Slag/small parts chute, Multi-chamber dust extraction, Compact dust extractor, Automatic shut-off, Safety devices, ToPs 100 lite, Tele-diagnosis device, RJ45 network connection- Special Equipment & Accessories: 3.5" floppy disk drive, Detailed operating manual, Automatic pallet changer with safety light barrier, AutoLas Plus, Clamping jaws for Pallet A+B (4 pcs each), Additional 3.75" laser cutting head, Loading device (overhauled in workshop 2017), Programming software TRUMPF TruTops Laser, Gas fittings, Teleservice via Internet- Chiller Unit (Riedel L15/21-TR3.23, YOM: 10/2004): 400 V / 50 Hz, 42 A, IP54, Refrigerant R134a (11.5 kg), Max working pressure 20.2 barStoremaster:- Drawer Usable Area: 2,500 x 1,250 mm- Max Load per Drawer (evenly distributed): 3,000 kg- Max Load per Top Level (evenly distributed): 3,000 kg- Max Load per Rack Block (evenly distributed): 60,000 kg- Max Load at Crane Hook: 325 kg- Max Load under Vacuum Lifter (evenly distributed): 180 kg- Special Equipment: SCHMALZ vacuum lifter- Dimensions (from technical drawing): Height ca. 3,500 mm / 4,170 mm (modified/adjusted height ca. 3,500 mm), Width ca. 3,600 mm - 5,900 mm depending on layout/extension, Depth ca. 2,700 mm - 4,700 mm- Upper Grid Floors Capacity: 7,500 kg surface load each

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 490000709, pressing force: 25 t, bale length: 1,200 mm, bale width: 780 mm, bale height: 700 mm, bale weight: 280 kg, total width: 1,700 mm, total height: 2,370 mm, total length: 1,248 mm, type of input current: three-phase, input voltage: 400 V, input current: 8 A, overall weight: 1,210 kg, power: 4 kW (5.44 HP), input frequency: 50 Hz, Turn your waste paper into money! With the HSM V-Press 825 plus pro, you can transform loose cardboard and waste paper into compact, marketable bales. We sell our own cardboard bales to a recycling company – take advantage of the potential of your recyclable materials! The purchase conditions depend on the material quality, quantity, and regional buyer. At the same time, you reduce cardboard piles, gain valuable storage space, and create order in your business. We are selling our vertical baling press, the HSM V-Press 825 plus pro, model year 2016, directly from our facility. Your advantages: • Fully functional • Maintained by a specialist company • DEKRA-certified • Suitable for cardboard, paper, and film • Inspection and demonstration possible while powered Ideal for production companies, warehouses, mail-order businesses, and commercial enterprises that want to collect their packaging waste in a space-saving manner and prepare it for recycling. Technical data: Ljdpfez Ad Rpox Amzeah • Model: HSM V-Press 825 plus pro • Year of manufacture: 2016 • Pressing force: 250 kN (approx. 25 tons) • Bale dimensions: 1,200 × 780 × max. 700 mm (L × W × H) • Bale weight: up to 280 kg, depending on the material • Motor power: 4.0 kW • Power connection: 400 V three-phase / 50 Hz • Rated current: 8.5 A • Machine dimensions: 1,700 × 1,248 × 2,370 mm (W × D × H) • Machine weight: approx. 1,210 kg • Machine number: 6152.314 • Serial number: 490000709 See for yourself how the press works! Arrange an inspection appointment now in Simmozheim near Stuttgart. Send us your desired date via "Send Inquiry" or call us directly.

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, total height: 325 mm, total width: 185 mm, total length: 483 mm, overall weight: 16 kg, type of cooling: water, electrical fuse: 16 A, welding current at 100% duty cycle: 175 A, welding current (min.): 5 A, welding current (max.): 250 A, Equipment: documentation/manual, type plate available, Complete set: LORCH T 250 DC Basic Plus TIG welding machine with WUK 7 water cooling unit and accessories For sale is a professional industrial welding machine from the premium brand LORCH, model T 250 DC Basic Plus, combined with the innovative water cooling unit WUK 7. The system is designed as a mobile all-rounder as well as a fully-fledged workshop device and shines with state-of-the-art inverter technology. Manufacturer: LORCH (Made in Germany) Model: T250 DC Basic Plus incl. optional WUK 7 water cooling unit Condition: very good, fully functional Location: Graz _____ Scope of delivery (Full Set): • LORCH T 250 DC Basic Plus TIG inverter welding machine • LORCH WUK 7 water cooling unit (direct LorchNET connection) • TIG welding torch incl. 8-meter hose package • Ground cable • Maintenance unit for gas / pressure regulator _____ The new price was approximately €6,000 Lajdpfxjyxvwis Amzjh _____ Highlights: • Innovative single-cable solution: Thanks to the modern cooling unit connection, the entire system (inverter + water cooling) now only requires a single power cable. The power supply and intelligent, demand-based control of the WUK 7 are carried out directly via the rear of the welding power source. No cable clutter during assembly! • High-end inverter technology: Full 250 A welding power in a compact design. • FastPuls function (up to 2 kHz): Perfect for distortion-free welding of extremely thin sheets. • Robust mobility: Extremely lightweight base unit (only 16 kg), ideal for rough use in vehicle construction, metalworking, and tank and pipeline construction. _____ Technical data: • Power range: 5 – 250 A • Duty cycle (ED) at 40°C: 60% = 200 A / 100% = 175 A • Mains voltage: 400 V (mains fuse 16 A) • Cooling capacity (WUK 7): 0.53 kW • Weight: approx. 16 kg • Dimensions welding inverter Lorch T 250 DC: 483 x 185 x 325 mm (L x W x H) • Dimensions water cooling unit Lorch WUK 7: 547 x 212 x 265 mm (L x W x H) _____ The device is in a ready-to-use condition. Inspection and test run are possible by arrangement.

Condition: ready for operation (used), HSM V-Press 860 baler, year 2008–2009, price: €5,800 Pressing force: 54 kN Specific pressing force: 63.46 N/cm² Drive power: 7.5 kW Cycle time: 25 s Loading height: 1,110 mm Feed opening width x height: 1,195 x 650 mm Bale dimensions (L x W x H): 1,200 x 780 x 1,200 mm Bale weight: 480 kg Machine dimensions (W x D x H): 1,797 x 1,247 x 2,985 mm Machine weight: 2,008 kg Binding material: wire Materials processed: foil, mixed paper, cardboard, die-cut waste, textiles, Big Bags, polystyrene Lodpfx Aora Rbgsmzeah HSM V-Press 860 plus, year 2013–2015, price: €8,000 HSM V-Press 860 L, year 2015, price: €9,000 HSM V-Press 860 plus, year 2019, price: €9,000 HSM V-Press 860 plus, year 2024, price: €10,000 HSM V-Press 860, new/ex-demo, year 2020, price: €13,000 4-fold bale wire tying Bale dimensions (L x W x H, mm): 1,200 x 800 x 1,000–1,200 Bale weight: approx. 500 kg Technical data (L x W x H, mm): 1,213 x 1,824 x 2,987 Feed opening (mm): 1,200 x 565 Cycle (s): 35 Pressing force (t): 54 Power supply (V): 400 (three-phase) HSM V-Press 860 plus B, year 2020, price: €14,000 Pressing force: 594 kN Voltage/Frequency: 400 V/50 Hz Drive power: 4 kW Feed opening width x height: 1,500 x 651 mm Bale dimensions (L x W x H): 1,500 x 780 x 1,200 mm Bale weight: 550 kg Feeding type: Manual Machine dimensions (W x D x H): 2,099 x 1,245 x 2,985 mm Machine weight: 2,336 kg Binding material: wire Material processed: foil, cardboard Idle cycle time: 25 s

Condition: used, Year of construction: 2004, functionality: fully functional, pressing force: 59 t, filling opening width: 1,190 mm, filling opening length: 600 mm, bale length: 1,200 mm, bale width: 730 mm, bale height: 1,100 mm, bale weight: 500 kg, total width: 1,047 mm, total height: 3,079 mm, total length: 1,850 mm, type of input current: three-phase, input voltage: 400 V, overall weight: 2,300 kg, input frequency: 50 Hz, Strautmann PP 1207 Plus Baler – Year of manufacture 2004 Used vertical baler, Strautmann PP 1207 Plus, for the efficient compaction of cardboard, paper, film and other suitable recyclable materials. Technical data: Manufacturer: Strautmann Model: PP 1207 Plus Year of manufacture: 2004 Pressing force: 580 kN / approx. 59 tons Motor power: 4 kW Power supply: 400 V / 50 Hz Bale dimensions: approx. 1,200 x 1,100 x 730 mm Bale weight: approx. 400–500 kg, depending on the material Feed opening: approx. 1,190 x 600 mm Machine weight: approx. 2,300 kg Dimensions: approx. 1,850 x 1,047 x 3,079 mm (L x W x H) Transport height: approx. 2,170 mm Noise level: below 80 dB(A) The machine is suitable for volume reduction and compaction of cardboard, paper and film. Ledpfxjz Ht Ezo Amzeah For transport, the machine can be partially disassembled. The hydraulic ram must then be reassembled professionally. Inspection possible by appointment. All information without guarantee. Subject to prior sale.

Condition: like new (used), Year of construction: 2015, functionality: fully functional, Kilia Bowl Cutter 50 Litres Meister Plus Vario with Hand and Knee Operation Condition: Factory reconditioned with 6 months warranty. The Kilia 50 litre Meister Plus Vario is a powerful universal high-speed bowl cutter for the production of fine and coarse sausage products as well as many other products. The machine impresses with its compact design, high-quality stainless steel construction and modern, infinitely variable drive technology for precise mixing and cutting. The machine is equipped with a 6-knife head, infinitely variable knife shaft drive with forward and reverse operation, infinitely variable bowl drive, electric knife shaft brake, temperature cut-off, revolution counter with automatic stop, central lubrication for the knife shaft and plate shaft bearings, as well as a 7-inch touch display as an alternative operating solution. In addition, the machine features hand control and knee control for particularly practical and ergonomic operation. The noise protection cover is included, and the knife cover is manually operated. An electric knife cover drive is optionally available. Technical Data: Bowl volume: 50 l Capacity: approx. 35 kg Knife speed mixing/cutting: 50 to 5,100 rpm Reverse knife shaft operation: 50 to 500 rpm Knife tip speed: up to 97 m/s Bowl speed: 7 to 20 rpm Knife drive: infinitely variable Bowl drive: infinitely variable Time/revolution cut-off: yes Temperature cut-off: yes Central lubrication: yes Remote control: yes Touch control / hand control / knee control: yes / yes / yes Hydraulic knife cover drive: – Hydraulic ejector: – Manual ejector: – Recipe manager KPV: optional Scale: optional Standard Electrical Data: Knife shaft drive power: 12 kW Bowl drive power: 1.5 kW Voltage: 400 V Frequency: 50 Hz Laedpfxjzcux Ss Amzoh Customer-side pre-fuse: 32 A

Condition: excellent (used), Year of construction: 1993, Technical specifications: Manufacturer: Striebig Year of manufacture: 9/1993 Type: Standard II Plus 5220A Feed: manual Design: automatically adjusting aluminum slat bed Laedpfx Ameiwlz Ajzsh Saw carriage locking: manual Lowering of saw unit: manual Swivel adjustment 0 to 90°: manual Motor power: 4.4 kW Cutting range: 4600 × 2200 × 60 mm Speed: 5250 rpm Saw blade diameter: 300 mm Space required: L × H × W 5700 × 3000 × 1400 Condition: very good Location: warehouse Saw blade: 1 piece Can be loaded onto a truck using a forklift on site. Delivery and assembly possible by arrangement.

Condition: good (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, controller manufacturer: Matsuura G-tech (Fanuc), controller model: 16i, workpiece height (max.): 750 mm, workpiece diameter (max.): 650 mm, workpiece weight (max.): 400 kg, total height: 2,635 mm, total length: 5,870 mm, total width: 3,440 mm, table width: 500 mm, table length: 500 mm, table load: 400 kg, overall weight: 13,700 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 15,000 rpm, coolant supply: 25 bar, number of slots in tool magazine: 240, Equipment: chip conveyor, documentation/manual, We are pleased to offer this well-maintained Matsuura H-Plus 405 with pallet pool. This is a highly compact machine with extensive machining capabilities and 240 tool positions in the magazine. The machine was manufactured in 2004 and is equipped with the Matsuura G-Tech 16i (Fanuc 16i) control system. Technical specifications: Table dimensions: 500 x 500 mm Number of pallets: 6 Table load capacity: 400 kg X-axis travel: 600 mm Y-axis travel: 600 mm Z-axis travel: 600 mm Laedpfoz Rmk Tsx Amzoh Table indexing: 0.001° Spindle mount: Mas BT40 Big Plus Spindle speed: 50 – 15,0001 rpm Spindle motor: 22/18.5 kW Magazine capacity: 240 We realise that you may wish to receive further information or view the machine. In that case, please contact us, providing your company details so that we can get in touch with you. About Mamach Machinehandel: With over 40 years experience in the CNC machinery sector, we are now one of Europe’s leading suppliers of metalworking machinery. Our success is based on high quality, customer-focused service and a strong international network. Discover our wide range of used CNC lathes and machining centres – we’d be happy to advise you personally!

Condition: like new (used), Year of construction: 2020, functionality: fully functional, type of input current: three-phase, control type: manual, total height: 1,400 mm, total length: 1,640 mm, total width: 750 mm, overall weight: 295 kg, table height: 900 mm, Equipment: CE marking, cooling unit, lighting, Technical specifications: Bevel cutting on two sides, Cutting speed: 40/80 m/min, Motor power: 0.9/1.4 kW; 400 V / 50 Hz, Machine dimensions (L x W x H): 1640 x 750 x 1400 mm, Machine weight: 295 kg, Saw blade dimensions: 2710 x 27 x 0.9 mm, Working height: 900 mm, Cutting range (90°): Ø 235 mm (300 x 200 mm), Main motor: 400 V, 50 Hz, 0.9/1.4 kW, Pump motor: 400 V, 50 Hz, 0.05 kW, Belt speed: 35/70 m/min, Vice working height: 900 mm, Coolant tank capacity: approx. 15 l. Lsdjz Tdcxepfx Amzeah The saw is in very good technical condition and can be tested at our warehouse in Přerov.

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, operating hours: 200 h, machine/vehicle number: 230608, 4. Main Extruder Type: CWT95-Plus co-rotating twin-screw extruder; L/D 48 Machine Description: *IE5 AC 250 kW motor *Gearbox: Precise balancing principle applied to increase torque level; High safety factor design; Latest steel alloy material for gears, applied with special heat treatment and manufactured to a high level of precision; Laodpfezxxifjx Amzoh Imported NSK bearings and sealing rings; Special lubrication system combined with immersion and forced lubrication solutions; Latest generation plate heat exchanger configured for optimal cooling; Input/output rotation speed: 1480/600 rpm; Torque: 2x1990 N.M Oil pump: 1.5 kW With heat exchanger, flow meter, oil pressure gauge *Power Transmission: Compomac safety clutch torque limiter from Italy, with speed sensor *Extrusion Line: Screw diameter: 93 mm, L/D: 48:1; Maximum screw speed: 600 rpm; Screw configuration: modular structure, torque transmission via splines; Screw material: W6Mo5Cr4V2, surface hardness HRC58～64; Barrel configuration: modular structure, each barrel with a length of 4L/D; The inner surface of the linear material is made of α101, surface hardness is HRC62-64; Barrel No.1: Feeder for all possible components, No. 4 and No. 6 with a side feed port and a venting port. No. 8, 9, 11 with a suction port for degassing. The screw profile will be determined based on the requirement. *2 side feeders for lateral feeding *1 set of degassing adapted to the needs Liquid ring pump, 1m3 water tank, gas and vapor recovery system *Electrical Cabinet Enclosure: Rittal Heat Exchanger: Apex Variable Frequency Drives: ABB PLC: Siemens Components: Schneider Electric *Spare Parts One set of screw and barrel elements and one set of shafts will be delivered with the machine.

Condition: like new (used), Year of construction: 2012, operating hours: 4,541 h, functionality: fully functional, machine/vehicle number: SN:79004, travel distance X-axis: 1,035 mm, travel distance Y-axis: 540 mm, travel distance Z-axis: 620 mm, feed rate X-axis: 35 m/min, feed rate Y-axis: 35 m/min, feed rate Z-axis: 35 m/min, nominal power (apparent): 14 kVA, torque: 96 Nm, controller manufacturer: Heidenhain, controller model: TNC 620, workpiece weight (max.): 1,000 kg, total height: 2,850 mm, total length: 2,500 mm, total width: 2,910 mm, table width: 540 mm, table length: 1,200 mm, table load: 1,000 kg, rotational speed (min.): 10 rpm, rotational speed (max.): 10,000 rpm, overall weight: 5,100 kg, spindle speed (min.): 10 rpm, spindle speed (max.): 10,000 rpm, operating hours of spindle: 4,541 h, coolant supply: 3 bar, distance table to spindle center: 150 mm, spindle motor power: 1,400 W, number of spindles: 1, number of slots in tool magazine: 24, input voltage: 400 V, type of input current: AC, Equipment: documentation/manual, rotational speed infinitely variable, The machine is in excellent condition and is almost like new. It has been used almost exclusively for aluminum prototype construction. Disassembly upon request. Here are all the details from the technical description. SN: 79004, Year: 2012 Commissioned: February 2014 UVA 1035 PLUS Heidenhain Vertical machining center with HEIDENHAIN TNC 620 control, new price, after discount, net 79,900.00 Standard equipment of the UVA 1035 PLUS as ex works: - Computer-optimized, vibration-damping machine base made of gray cast iron - Large linear guides with 45 mm width in all axes Description Overall price - CNC control Heidenhain TNC 620 - Ergonomically arranged control panel with electronic handwheel - Digital Heidenhain drives in all axes - Ball screws (supported on both sides and preloaded) diameter 40 mm - Pitch 12 mm in all axes - Rapid traverse rate 35 m/min in all axes - Guide covers (telescopic) in all axes - Spindle taper SK 40 DIN 69871 A - Tool pull stud DIN 69872 - Main drive with 13 kW, 96 Nm - Main spindle speed range 10 - 10,000 1/min - Preparation for internal cooling 20 bar - Tool changer (dual-arm gripper) with 24 storage locations - Work area full protection with large viewing doors and 2 work area lights - Large coolant tank with 380 l capacity - 2 chip drawers for easy and quick manual chip disposal - Flood coolant 3 bar / 60 l/min - Chip flushing in the work area - Spray gun for cleaning the inside of the machine - Signal light 2-color - Festo pneumatic system - Automatic central lubrication in all axes - All axes: Positioning accuracy +/- 0.005 mm - Repeat accuracy +/- 0.003 mm (ISO 230-3) - Painting in light gray (RAL 7035) and blue gray (RAL 7031) - Documentation - UVA Unverzagt machining centers comply with the CE standard UVA 1035 PLUS Heidenhain Technical details of the machine Travel ranges Travel X-axis [mm] 1,035 Travel Y-axis [mm] 540 Travel Z-axis [mm] 620 Distance spindle bottom edge to table [mm] 150 - 770 Work table Table length [mm] 1,200 Table width [mm] 540 Number of T-slots 5 Slot width [mm] 18 Table load max. [kg] 1,000 Feed Rapid traverse X and Y axis [m/min] 35 Rapid traverse Z axis [m/min] 35 Diameter ball screw X and Y axis [mm] 40 Diameter ball screw Z axis [mm] 40 Main spindle Main spindle speed max. [1/min] 10,000 Main spindle power [S6-40% ED kW] 14 Main spindle torque max. [Nm] [S6-25%] 96 Tool holder SK 40 Tool magazine Number of tool magazine positions 24 Tool change time [sec] 2.8 Ljdpfx Aozzrmpomzjah max. tool diameter [mm] 80 max. tool length [mm] 300 max. tool weight [kg] 7 Coolant system Volume coolant tank [l] 380 Through coolant pressure [bar] 3 Through coolant [l/min] 60 Internal coolant supply pressure [bar] 20 (optional) Air blow external yes Basic machine data Installation area width [mm] 2,910 Installation area depth [mm] 2,500 Machine height [mm] 2,850 Weight of the basic machine [kg] 5,100 Electrical connection power [kVA] 30 Required pneumatic connection [bar] 6 Required compressed air [l/min] 260 Control Manufacturer Heidenhain Control type TNC 620

Condition: used, PCB handling equipment from E-Flex SMT microsystems: WHM-106SD3TM-Al (2022) price: €6,878 WHM-330SD0TXL-AIR(UXL)C (2023) price: €5,367 WHM-201SDNTM-I (2022) price: €3,832 WHM-201SDNTM-I (2022) price: €3,832 WHM-200SD3TM-I (2022) price: €3,338 WHM-201SDNTM-I (2022) price: €2,899 Laedpex Tzn Aefx Amzjh WHM-201SDNTXL-IA(SD2) (2023) price: €5,739 WHM-200SD3TM-IA (2022) price: €3,439 WHM-200SD3TM-l (2022) price: €3,738

Condition: used, Year of construction: 2006, controller manufacturer: Siemens, controller model: 840D - Powerline, _____ Description: Year of manuf. : 2006 Control : Siemens 840D - Powerline Turning diam. : 140 mm Turning length : 480 mm Mainspindle: Technology:Belt-driven spindle Speed:6.300 rpm Power (max.):10 kW Torque (max.):78 Nm C-Axis:0,001° Barcapacity:45 mm Workpiececlamping:Collet chuck, Hainbuch Spanntop nova Kombi Axfix Gr. 65 Subspindle: Technology:Belt-driven spindle Speed:7.000 rpm Power (max.):10 kW Torque (max.):45 Nm C-Axis:0,001° Workpiececlamping:3-Jaw chuck, Röhm KFD-HS 130-3 Movement in Z:510 mm Rapid travers in Z:24 m/min Toolcarrier I (X/Z): Technology:Turret with 12 stations Taper:VDI25 Tooldrive:6.000 rpm, 7,5 kW, 12 Nm Movement in X/Z:160/510 mm Rapid travers in X/Z:20/24 m/min Toolcarrier II (X): Technology:Turret with 12 stations Taper:VDI25 Tooldrive:6.000 rpm, 7,5 kW, 12 Nm Movement in X:140 mm Rapid travers in X:20 m/min Equipment/Accessory: Chipmanagement:Chip conveyor Lasdpfxo Aa Hm Ee Amzoh Coolingmanagement:Cooling pumps with Highpressure, 14 bar Raw materialfeed:Bar loader, EMCO Top Load 8-45 Finishpart removal:Part catcher with conveyor belt Extraction:Interface mechanical prepared Further Equipment:Rinsing pistol Further Accessory:Misc. used static and driven Toolholder

Condition: ready for operation (used), Year of construction: 2013, Brand: HSM Model: V-Press 1160 plus Lajdpfxs Adrwdo Amzeh Year of manufacture: 2013 Pressing force: 532 kN Voltage: 400 V Max. bale weight: up to 550 kg (depending on the material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2403 kg Machine dimensions: 180 x 157 x 298.5 cm Feed opening dimensions: 119.5 cm x 65 cm

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 43,209 h, control type: CNC control, degree of automation: automatic, laser type: CO₂ laser, laser hours: 26,141 h, laser power: 2,500 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, type of cooling: water, Equipment: cooling unit, documentation/manual, emergency stop, safety light barrier, We are offering this used LVD SIRIUS 3015 Plus laser cutting machine, manufactured in 2015. Manufacturer: LVD Model: SIRIUS 3015 Plus Year of manufacture: 2015 Condition: Used Category ID: 1041 Type ID: 1180 Machine type: Laser cutting machine LVD Sirius 2.5 kW CO₂ laser cutting system with exchange table – large format 3,000 × 1,500 mm – fully functional For sale is an LVD Sirius laser cutting system with a CO₂ laser power of 2.5 kW (2500 W). The machine is fully functional and can be inspected on-site and tested in operation after prior arrangement. Technical data / Equipment Lsdpsz Iha Aefx Amzjah * Manufacturer: LVD * Model: Sirius * Laser power: 2.5 kW / 2500 W * Laser type: CO₂ laser * Table format / working area: approx. 3,000 × 1,500 mm * Large format laser cutting system * Exchange table with 2 tables * Suitable for industrial metal processing * Used, fully functional Inspection and functional test An on-site inspection and functional test is explicitly possible. The machine can be inspected and tested in operation after scheduling an appointment. Dismantling and collection The machine will be ready for dismantling from December 15th. The complete dismantling, transport and loading will be carried out by the buyer at their own cost and responsibility. The buyer is responsible for the necessary organization, personnel and suitable equipment and tools for dismantling and loading. If you are interested or have any questions about the machine, please do not hesitate to contact us. An on-site inspection is possible after prior arrangement.

Condition: used, Year of construction: 2015, functionality: fully functional, overall weight: 1,500 kg, # PILOUS ARG 500 plus S.A.F. The PILOUS ARG 500 plus S.A.F. is a heavy-duty horizontal band saw designed for the precise and efficient cutting of metal profiles, solid materials, pipes, and structural sections. The machine is suitable for industrial applications and offers adjustable blade speed, hydraulic clamping, and a robust construction for reliable long-term operation. ### Technical Specifications * Model: PILOUS ARG 500 plus S.A.F. * Blade dimensions: 6040 × 41 × 1.3 mm * Blade speed: 15–90 m/min * Main motor: 400 V, 50 Hz, 4 kW * Pump motor: 400 V, 50 Hz, 0.12 kW * Hydraulic motor: 400 V, 50 Hz, 0.55 kW * Working height of vice: 870 mm * Hydraulic system oil capacity: 26 l * Hydraulic oil: ISO 6743-4/HM, DIN 51524 Part 2-HLP * Coolant tank capacity: 35 l Laedjzvhw Topfx Amzsh * Machine dimensions, minimum: 1410 × 2370 × 1580 mm * Machine dimensions, maximum: 2000 × 2800 × 2150 mm * Machine weight: 1530 kg ### Cutting Capacity | Cutting angle | Round material | Square material | Rectangular material | | ----- | -----: | -----: | -----: | | 90° | Ø500 mm | 450 mm | 620 × 450 mm | | 45° | Ø500 mm | 440 mm | 440 × 450 mm | | +45° | Ø500 mm | 440 mm | 430 × 450 mm | | ±60° | Ø350 mm | 310 mm | 310 × 400 mm | The PILOUS ARG 500 plus S.A.F. combines high cutting capacity, variable blade speed, and hydraulic operation, making it a suitable solution for demanding industrial metal-cutting applications.

Condition: used, Year of construction: 2005, functionality: unexamined, Equipment: CE marking, Belt grinding machine Manufacturer: Falcioni Type: Profitech Plus 5 Year of manufacture: 2005 1 belt grinding unit, swiveling 4 brush grinding units, swiveling Conveyor belt width approx. 75 mm Lajdjz Ritqspfx Amzeh Dimensions approx. 5000 x 1700 x 2300 mm (L x W x H)

Condition: ready for operation (used), Year of construction: 2019, operating hours: 5,180 h, total height: 1,070 mm, total width: 1,120 mm, overall weight: 211 kg, travel distance X-axis: 294 mm, travel distance Y-axis: 211 mm, travel distance Z-axis: 144 mm, product length (max.): 740 mm, number of axes: 3, This 3-axis 3DSYSTEMS ProJet MJP 2500 Plus was manufactured in 2019. It features a build volume of 294 x 211 x 144 mm and a build material capacity of 352.4 kg. The printer is equipped with the MJP EasyClean System for automatic support material removal. If you are looking to get high-quality 3D printing capabilities, consider the 3DSYSTEMS ProJet MJP 2500 Plus machine we have for sale. Contact us for further details. Laodpfxez U Ap Hj Amzjh - Machine Dimensions: 112 x 74 x 107 cm - Machine Weight: 211 kg - Voltage: 100 - 240V~ - Frequency: 50/60 Hz - Phase: 1 PH - Current: 12 - 9.5A - Software: 2 lifetime 3D Sprint licenses - Included Platforms: 2 print platforms - Included Accessories: MJP EasyClean System (steam bath for automatic removal of support material)

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, UNOX XECC-0513-EPR CHEFTOP MIND.Maps COMPACT PLUS | Electric convection-steam oven, 5x GN 1/1 Manufacturer: UNOX S.p.A. Model / Type: CHEFTOP MIND.Maps™ COMPACT PLUS XECC-0513-EPR Ljdpfjz Tdkpjx Amzsah Serial number: 2019E0037931 Year of manufacture: 2019 Power supply: 380–415 V 3N~ / 220–240 V 3~ / 50/60 Hz Power: 9.3 kW Overall / internal dimensions: 535 x 872 x 649 mm Chamber capacity: 5 trays / GN 1/1 racks (rack spacing: 67 mm) Net weight: 65 kg, gross weight: 80 kg Other parameters: Protection rating: IPX4 Water pressure: 150–600 kPa (1.5–6 bar) Certificates: CE, EAC, NSF The professional UNOX CHEFTOP MIND.Maps™ COMPACT PLUS electric convection-steam oven (model XECC-0513-EPR) is a technologically advanced piece of catering equipment, designed for kitchens, restaurants, catering services, and delicatessens, where maximizing space efficiency without compromising performance is crucial. The COMPACT series stands out with its width of only 535 mm while maintaining full compatibility with GN 1/1 gastronorm containers. The device is controlled via an intuitive touchscreen panel with MIND.Maps™ technology, which allows for precise design and storage of custom thermal processing cycles. The oven is equipped with advanced chamber climate control systems: STEAM.Maxi™ (steam generation and precise humidification), DRY.Maxi™ (forced and rapid moisture removal for crispness), and AIR.Maxi™ (multi-point air circulation with auto-reverse, ensuring perfectly even baking on all 5 levels). The PLUS version designation guarantees the highest level of intelligent performance, supported by algorithms for automatic adjustment of baking parameters (ADAPTIVE.Cooking™). It is an ideal choice for continuous operation in roasting, frying, steaming, regeneration, and baking of meat and bakery products.

Condition: ready for operation (used), Year of construction: 2014, Brand: HSM Model: V-Press 1160 plus Year of manufacture: 2014 Pressing force: 532 kN Lodpfx Amsz Rmg Uozsah Voltage: 400 Max. bale weight: up to 550 kg (depending on the material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2403 kg Machine dimensions: 180 x 157 x 298.5 cm Feed opening dimensions: 119.5 cm x 65 cm The HSM 1160 V-Press offers simple operation, a powerful pressing force, and is energy-efficient. Are you looking for a more compact model? Then take a look at the HSM 860 – ideal for those who want to save space without compromising on pressing force. Video available upon request!

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, pressing force: 60 t, input voltage: 400 V, Used HSM V-Press 1160 Plus vertical baler, manufactured in 2014. The unit has been regularly serviced by an authorized service provider since new. The baler is fully functional and in very good technical and visual condition. Lsdpo Adrmfjfx Amzeah Pressing force: 594 kN Voltage / frequency: 400 V / 50 Hz Loading opening width x height: 1195 x 650 mm Bale dimensions (length x width x height): 1200 x 1100 x 1200 mm Machine dimensions (width x depth x height): 1780 x 1568 x 2985 mm Machine weight: 2403 kg Materials to be baled: plastic film, mixed paper, cardboard, die-cutting waste We also have other balers in stock. Transport costs depend on weight, volume, and, most importantly, distance. When inquiring, please provide the delivery address (postal code and town/city). For further details, please contact us by phone to discuss transport costs and other delivery options. We sell and export worldwide; thanks to our extensive storage capacity, we can also supply larger quantities quickly and flexibly. We issue intra-Community invoices (VAT-exempt). Opening hours: Mon–Fri: 8:00 AM – 4:00 PM Sat: Closed

Condition: used, Year of construction: 2009, functionality: fully functional, space requirement length: 14,000 mm, space requirement width: 2,000 mm, total height: 1,500 mm, total length: 12,000 mm, total width: 1,500 mm, year of last overhaul: 2025, Equipment: documentation/manual, Folding-Gluing machine Inramik Vesta 800 Plus 2009 - In production, 2 shifts per day, first owner - Up to 3 gluing points, Velco gluing system - Minimum box width 65mm - Maximum box width 800mm - Glue line monitoring/detection system - 1 ejector unit - Press section equipped with an acceleration/speed-up feature - Air nozzles and full tooling for CD envelopes and sleeves - Suction system at the feeder - Support rails (2 per section, 8 in total) - Central guides, including the upper assembly for packaging alignment - Glue pot converted to a conical fitting (similar to Bobst machines) – a more advanced solution - Two glue wheels, 5mm and 3mm - Belts replaced on a regular schedule The machine has been continuously maintained by our in-house maintenance team; in excellent working condition throughout its entire service life. Ledpfx Amo Aa I Nnozsah - Price includes dismantling and loading. Price: 45,000 EUR