Used Soest Line For Oil Application And Curing for sale (29,394)

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 157, working width: 400 mm, overall weight: 2,200 kg, total width: 400 mm, For sale: a complete, used line for applying and curing oil/oil-wax on wooden floors (Soest + Prochera). I am selling a set of four machines that form a line for oil-waxing floorboards, used in a production facility for two-layer parquet in Krotoszyn. The line has not been used for approximately 3 months and has been regularly maintained and repaired during this time. The set includes: 1. SOEST RC-L-400 (Netherlands): application unit with a roller, serial number 157, year of manufacture 05/2017, total weight 580 kg, CE marking. 2. SOEST VP-400-2P-B (Netherlands): spreading/brushing unit (spreading oil, stain, or other coatings using pads and brushes), serial number 264, year of manufacture 05/2017, total weight 480 kg. Crjdpfxozrm Uco Afnef 3. SOEST UV-3-400 (Netherlands): curing/drying unit, serial number 286, year of manufacture 04/2018, total weight 780 kg, CE marking. 4. PROCHERA SPL1-400C (Poland, Ziębice): brushing/polishing unit, no. 7, year of manufacture 2024, weight 355 kg, power 2 kW, CE marking. All units have a working width of 400 mm and are equipped with integrated conveyor belts and control/electrical cabinets. Total weight of the set: approx. 2,195 kg. Technical condition: unused for approx. 3 months, regularly maintained and repaired. Price: PLN 182,500 net (negotiable), plus VAT. Note: the line is sold as used, in its current condition. Before purchasing, an on-site inspection and individual verification of suitability for a specific type of finish are recommended (e.g., UV oil vs. classic oil-wax cured by air).

Condition: used, Line for forming cevapcici and cevapi (grinder with mixer, portioning device and belt transporter) Csdeg Atrvjpfx Afnjrf

Condition: like new (used), functionality: fully functional, Sheet Metal Perforating Line – For Sale Complete sheet metal perforating line manufactured by Sacform, suitable for perforating sheet metal and coils up to 1,200 mm wide. The line includes: Decoiler Feeder Perforating press - 1,200 mm width 2 punching dies: Die 1: 3×300 (2 mm hole diameter) Crodszix Atepfx Afnof Die 2: 1×1,200 (3 mm hole diameter) Pull-through cutting table Recoiler

Year of construction: 2007, condition: ready for operation (used), This HOMAG WEEKE industrial production line was manufactured in 2007. It features a comprehensive setup for high-volume panel processing and edge-banding, including automatic loading systems, a central roller conveyor, multiple edge-banding modules, and a portal manipulator for stacking. Ideal for streamlined wood production, ensuring efficient handling and precision. Consider the opportunity to buy this HOMAG WEEKE industrial production line. Contact us for more information about this machine. Application Types Complete Production Crjdpfx Afox D Dq Sonof

Year of construction: 2014, operating hours: 800 h, condition: like new (used), functionality: fully functional, We offer an automatic weighing and packaging line manufactured by BW Packaging Systems (formerly Simionato), built in 2014. The line is designed for the automatic portioning, weighing and packaging of dry food products such as nuts, dried fruits, seeds, cereals, confectionery and other free-flowing products. The machine is in excellent, like-new condition, has less than 1,000 operating hours and has been fully refurbished. It is fully operational, immediately available and ready for production. Crsdpfxjznlbgo Afnef The weighing system has a capacity of up to 80 portions per minute, while the intermittent packaging unit operates at speeds of up to 40 packages per minute, depending on the product and packaging format. The line is also equipped with a combined metal detector and checkweigher for automatic detection and rejection of metal contamination and underfilled or overfilled packages, ensuring consistent product quality and compliance with food safety standards. A complete maintenance history is available for every individual module of the line, including all service records and invoices. Full original CE documentation for the complete system is included, ensuring complete traceability and compliance. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: as good as new (ex-display), Year of construction: 2021, Direct from closed meat-free factory which opened in 2021. All machinery in near new condition and from 2021 and 2022. Very low running hours. Can be sold as whole line. Priced for end users only. New cost from GEA £1.66M Crodeyvav Nepfx Afnef

Condition: as good as new (ex-display), Year of construction: 2021, Direct from closed meat-free factory which opened in 2021. All machinery in near new condition and from 2021 and 2022. Very low running hours. Can be sold as whole line. Priced for end users only. New cost from GEA £1.66M Csdsyvau Espfx Afnsrf

Condition: used, Type Production Line Radiator production line Further information can be found in the attached PDF document. Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Cedpfxjzpbl De Afnsrf Subject to change, errors in technical data and specifications, and prior sale.

Condition: good (used), functionality: fully functional, Lubeca LW792 filler and LW303 seamer Diameter range: 50 - 160 mm Height range: 65 - 300 mm Production capacity: up to 70 c.p.m. Tooling for approx.: 160 x 90 mm Lubeca LW792 can filler Credpetqmwgofx Afnef Lubeca LW303 can seamer

Condition: like new (used), Year of construction: 2008, functionality: fully functional, Complete factory equipment for sale: weaving, embroidery, dyeing, finishing, and processing. Many more machines are available. Textile Department * Jacquard Weaving: 11 × Picanol looms, Model 2004, XC 870 (Belgian) * Air-Jet Jacquard Weaving: 8 × Picanol looms, Model 2004 XL * Air-Jet Jacquard Weaving: 6 × Picanol looms, Model 2004, 5400 Jacquard Bonas, Jumbo * Complete set of air compressors, dryers, and air tanks required for operating the weaving machines. * Dobby Weaving: 4 × Picanol Omni looms, Model 1999 * Air-Jet Dobby Weaving: 8 × 2004 looms, 2.5 m working width, suitable for producing linen, gabardine, and dress fabrics (Picanol Omni Plus) * Rapier Weaving Machines (Chinese): Model 2014 – 4 units * Modern Warping Machine: 720 / 11 cones – 1 unit * Karl Mayer Weaving Machines: Model 2021 – 4 units * Karl Mayer Weaving Machines: Model 2017 – 2 units * Sizing Machine: 3 units ⸻ Credpjziz Dysfx Afnsf Embroidery Department * Saurer Epoca Embroidery Machines: 4 machines, equipped with 5 special attachments * Spooling/Winding Machines: Belinda – 9 units * Spooling/Winding Machines: Barmag – 1 unit, Kaltema – 2 units * Complete set of air compressors, dryers, and air tanks required for operation. * Mouline Thread Production Line with all accessories (embroidery threads). ⸻ Finishing Department * Rams: 1 × Brückner, 6-chamber, with Mahlo, Model 2002 * Stenters: 3 Turkish Damson machines * Fabric Inspection Machine: 1 unit * Sewing Machines: 30 units * Fabric Pressing and Packaging Machine ⸻ General Factory Utilities * Industrial Chillers: 2 units * Steam Boiler: 6 tons, Riello burner, 2018 * Steam Boiler: 0.5 ton * Fabric Dyeing Jet Machine: 50 kg * Yarn Dyeing Machine (Hank): 600 kg * Yarn Dyeing Machine: 2 × 300 kg, complete with winding and unwinding system * Hydro Extractor: 1 for yarn + 1 for fabrics + 1 for hanks

Condition: used, Year of construction: 2018, functionality: fully functional, number of straightening rollers: 6, conveyor belt width: 1,300 mm, sheet thickness steel (max.): 1 mm, coil width: 1,250 mm, cutting length (max.): 6,400 mm, straightening roller diameter: 70 mm, space requirement width: 3,500 mm, space requirement length: 18,275 mm, space requirement height: 4,000 mm, Single-person operation, rapid access to a wide variety of sheets, automatic sheet changeover, standard sheets remain loaded in the system; the upper sheets are less common types; secure solution with a movable access aid for loading the upper decoilers; programmable slitting line with 8 pairs of knives in station version; slitting knives are alternately arranged for distortion-free cutting; rotary knives of the AL p with 100 mm diameter to achieve minimal incision; 7.2 m long conveyor belt for discharging the strips. Crsdpfoxwc E Isx Afnef The system layout PDF is shown as a mirror image!

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Complete beer canning line for beer (standard 330 and 500 ml can): 10 000 cans per hour (500ml), fully optimized and calibrated. Only 4 machine operators/workers in filling process. The offer includes: Depalletization, rinser, filles, seamer, RTG level inspection, dryer, carton machine, palletization, CIP, flas pasteurization Padovan, HGB,chiller, compressor etc. Cjdpouq Sb Sefx Afnorf

Condition: used, functionality: fully functional, With this offer, you are purchasing a used “Summa 1400 FME-p” production system Item for sale: Csdpfszb Aktox Afnorf 1 x Summa 1400 FME-p Condition: This listing is for a used device, which may show signs of wear (minor scratches or discoloration). The device has been tested for functionality. A test print can be seen in the photo. Packaging and Shipping: You are welcome to view the device during our business hours. Please schedule an appointment! Sea-worthy packaging and worldwide shipping are available upon request! Before shipping or pickup, we’ll record a video of a functional test for you. For more information, you’re welcome to contact us directly.

Condition: excellent (used), Year of construction: 1991, Сryogenic gas tank used for oxygen, nitrogen, argon, and carbon dioxide (CO2). Manufacturer: Harsco (Germany) Year of production: 1991 Vacuum isolation: with certificate. Cjdpfx Afoyuu Scjnerf We also have a variety of other tanks available for different industrial gases. Please contact us with your specific requirements, and we would be happy to assist you.

Condition: good (used), functionality: fully functional, Glass jar filling and closing line. 12 filling heads and 4 closing heads. Codpstqmvrsfx Afnjrf

Condition: like new (used), Year of construction: 2014, Complete Bottle Filling Line for non-aseptic milk and other dairy product Capability 270, 540 ml PET/Plastic bottles with the cap D- 38 mm Bottle size: 270mm: D-60mm, H-132mm 540mm: D-70mm, H-180mm Capacity: 270mm: 2500 bottles per hour Credsyiptqspfx Afnef 540mm: 2000 bottles per hour Made by SELO, Netherlands. YOM 2014 Consisting of: 1. 2x Accumulation Tables 150 cm diameter Motorised 2. Rotary Bottle Washer 15 bottle capacity Siemens Logo TD touch screen With Associated Conveyor 3. Selo 6 Head Filling Machine 6 head fully automated filling station With Selo pressure tank Schneider touch screen control Pump and associated pipework 4. Capper Rotary 3 Head fully automated bottle capper with Mobile Cap Hopper/ Swan Neck cap Feeder 5. Albertina/Etipak In Line Labeller 6. Associated conveyors AS NEW CONDITION

Condition: excellent (used), functionality: fully functional, Line of Quenching and Tempering Furnaces Bought new in Asia rebuilt with German technology Dephosphating washing machine Automatic weighing to dose the load Software with batch traceability management New thermal insulation on top, bottom and walls New refractory stainless steel mesh belt New Ceramic Recuperative Burners from IBS Crjdpfxot Ty Sdo Afnjf General retrofitting for electrical panels and automation Mainly is used to quenching and tempering, fasteners, nuts and special parts for automotive industry Class 8.8, 10.9 and 12.9 Capacity: 1.000 kg/hour Possibility to load, transport and install the line at your facilities Price to be agreed

Condition: new, functionality: fully functional, Year of construction: 2026, Dry and Wet Ball Mill: Structure, Operation, and Technical Details A ball mill is a fundamental grinding device used in mineral processing, cement manufacturing, chemical production, and other industrial applications. It works by rotating a cylindrical shell filled with grinding media—usually steel balls—causing impact and friction that reduce materials to fine powder. Based on the grinding environment, ball mills are classified into dry and wet types, each suited for specific materials and process requirements. Working Principle Both dry and wet ball mills operate on the same mechanical principle. The rotating cylinder, driven by a motor through a gear system, lifts the grinding media and material along the inner wall. As the rotation continues, the balls fall under gravity, striking and grinding the material. The difference lies in the presence or absence of a liquid medium during grinding. Dry Ball Mill A dry ball mill is used when the material must remain moisture-free or when water could affect product quality. It is commonly applied in cement clinker, limestone, quartz, and refractory material grinding. The discharge can be either grate type or overflow type, depending on the desired fineness. Technical Features: Feeding size: ≤25 mm Discharge size: 0.075–0.4 mm Capacity: 0.65–90 t/h Csdpfx Aeq Nx Alefnsrf Liner material: High manganese steel or wear-resistant alloy Drive system: Gear-driven or direct-coupled motor Dust control: Equipped with air exhaust and dust collector Advantages: Suitable for materials sensitive to moisture No drying process required after grinding Lower corrosion risk and simpler maintenance Easier material classification and separation Limitations: Dry grinding produces more dust and heat, requiring efficient ventilation and dust collection systems. Wet Ball Mill A wet ball mill operates with water or another liquid medium added to the material. The slurry formed during grinding improves efficiency by reducing friction and preventing excessive heat buildup. It is widely used in ore beneficiation, ceramics, and chemical industries. Technical Features: Feeding size: ≤25 mm Discharge size: 0.074–0.2 mm Capacity: 0.65–615 t/h Liner material: Rubber or high-chromium steel Discharge method: Overflow or grate type Auxiliary equipment: Classifier, pump, and thickener for slurry circulation Advantages: Higher grinding efficiency and finer particle size Reduced dust and noise levels Continuous operation suitable for beneficiation circuits Better control of particle uniformity Limitations: Requires drying if the final product must be in powder form and involves more complex slurry handling. The selection between dry and wet grinding depends on the material characteristics, downstream process, and environmental conditions. Dry mills are preferred for materials that must stay moisture-free, while wet mills are ideal for fine grinding and slurry-based processes. Conclusion Dry and wet ball mills share the same mechanical structure but differ in their grinding environment and application scope. The dry type offers simplicity and low maintenance for moisture-sensitive materials, while the wet type provides higher efficiency and finer output for mineral and chemical processing. Understanding their technical parameters and operational differences ensures optimal equipment selection, improved productivity, and reliable performance in industrial grinding operations.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, Complete Kempner automatic L-sealing, shrink wrapping and labelling system, manufactured in 2024 and in excellent working condition. This system comprises of the following machines: Cedpfxoyrup Ao Afnsrf 1 x Kempner automatic L-sealer. Model - ZF-A6345-T. Serial number - 13677. Sealing bars - 560mm x 380mm. Electrical requirements - 220 V / 50 hz / 1 phase. Power - 2.5 kW. 1 x Kempner shrink heat tunnel (electric). Model - ZF-S550. Serial number - 22097. Electrical requirements - 380 V / 50 hz / 3 phase. Power - 12 kW / 27 Amps. 1 x Kempner automatic easy tear label applicator. Model - ZD-L1. Serial number - KL-24022-4. Electrical requirements - 220 V / 50 hz / 1 phase. Power - 2 kW. This system was previously used to pack donuts and was in production for approximately 9 months in total. Manufacturer - Kempner.

Condition: used, Year of construction: 2021, Oil Application Machine LW100.6/300 Two-Roller Machine – Roller width: 300 mm, material passage up to 80 mm. Oil application on top and bottom. Adjustable feed speed approx. 6–35 m/min. Motor 0.37 kW, 400 Volt, 50 Hz. CE certificate. Machine table working height 900 mm, powder-coated. Additional safety hood with adjustable pass-through thickness, with plexiglass insert. Non-driven roller conveyor 1300 mm, working height 900 mm, height adjustable. Storage location: Nattheim. Cjdpfxexy Tmus Afnorf

Condition: excellent (used), functionality: fully functional, grinding width: 1,350 mm, overall weight: 4,200 kg, Fine and smoothing sanding machine Heesemann, model: FGA 6 For intermediate lacquer sanding, wood surface smoothing, and sanding of foils The machine is fully functional, well maintained, and in very good technical condition. The conveyor belt has been replaced. Sanding width: 1300 mm Working height: 880 mm, constant Maximum workpiece thickness: 3–80 mm Codpfx Aeya I Iuefnorf Transport bed: with individual transport belts Drive: 2.5 kW three-phase motor, including blow-off unit Feed speed: 4.5–22 m/min, adjustable Units Brush roller unit: centrally height-adjustable Diameter: 150 mm Drive power: 1.5 kW Bristle material: Fibre Longitudinal sanding unit Continuous electronic adjustment of the sanding belt speed via frequency inverter Wear-free brake unit Pneumatic belt tensioning Intermittent belt blow-off device Infrared belt control Counter-rotating sanding belt Sanding belt dimensions: 2620 x 1350 mm Belt sanding speed: 0.3–12 m/s Drive power: 11 kW Graphical operator terminal for inputting machine settings, including numeric thickness adjustment and displays for fault sources, workpiece throughput, and feed speed Electronically controlled pressure beam Control roller spacing: 40 mm Pneumatic belt tensioning The pressure beam's contact surfaces automatically adjust to the shape of the passing workpieces Workpiece vacuum hold-down system: Fan with 5.5 kW drive power Operator side and terminal: left Operating voltage: 400 V, 50 Hz Space requirements: 2550 x 2220 x 2300 mm Weight approx.: 4200 kg (Technical specifications are subject to change and errors, as well as prior sale.)

Condition: excellent (used), functionality: fully functional, total length: 1,205 mm, total width: 1,000 mm, total height: 1,890 mm, REF: MM6147 30 x Stainless-steel hanging racks for curing meat, previously used for hanging chorizo. These racks can be stacked one on top of each other. Csdpfxjx Tg Axo Afnorf Overall dimensions - 1205mm long x 1000mm wide x 1890mm high. 

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, EV Car Motor Assembly and Testing Line (2021) Designed to produce EV motors in the power range of 180–300 kW Including manual, semi-automated, and automated operations Cycle time: 86s Stations and Equipment Component loading - KUKA KR15 R2700-2/FLR robot (2021) - Material infeed - Inner housing heating with induction coil up to 240 °C - Stator pressing into housing - 1T TOX press - Keyence CA-DQP25X - Cooling tunnel - Cooldown to 24 °C - Cycle time: 600 s X-ring and D-ring inner housing assembly - X-ring and D-ring seal insertion into housing - Dedicated round assembly tool available Outer housing pre-assembly - Flange screw into housing with Bosch Rexroth ESA013G-G0 screwdriver - Automatic inner and outer housing joining Outer housing assembly - 3T TOX EQK 030 press - 2x Cognex scanners - 2x Keyence Camera V3 - 3x VS camera systems Rotor magnetization and measurement - Magnet magnetization - MagSys magnetizer MC3K82 (2020) - Magnetizing fixture MFFer8/160/250 A-shield pre-assembly and rotor insertion - Rotor bearing and resolver pressing - 3T TOX press Crodpozhub Asfx Afnsf A-shield assembly into outer housing - 1T TOX EQK press - A-shield screwing into outer housing with pneumatic screwdriver (5 Nm) Mounted component fastening - Fastening with 4GE59 Rexroth screwdriver - Manipulator system Handyflex 400 Inter-connector connection - Manual mounting of inter-connector and insulating tube Counter ring insertion, cooling cover, and vent assembly - 3T TOX EQK 030 press Rotor cooling cover mounting - Screwing with 4 Nm End-of-line (EOL) electrical testing loop - 5x Deutronic testers, including: - ETL ATS 400 high-voltage testers - HIOKI RM3545 resistance testers - Reilhofer EOL analyzers Inter-connector disconnection station - Disconnection of the inter-connector - Insertion of 2 screws and screwing with Rexroth screwdriver (13 Nm) - Manipulator system Handyflex 300 - Washer control - Motor rotation Leak testing - 2x Leak test stations with Innomatec LTC-902 testers - Vacuum and overpressure leak tests - Tested quantity: approx. 50,000 pcs per test station Rotation, laser marking, stamping, engraving, and inspection - ADT stamping machine - Arex Laser 450 - Keyence CA-H camera system - Datalogic CBX 100 reader - Tested quantity: approx. 130,000 pcs Transportation protection - Yellow transportation cover/cap and plug assembly - Manual insertion of caps and hole securing Packaging and final inspection - Dalmec manipulator (2022)

Year of construction: 2013, condition: used, JASA Packaging Systems Complete Cup Weighing, Filling & Closing Line Complete line available – Individual machines can also be purchased separately. This complete JASA Packaging Systems weighing, filling and cup closing line is offered directly from production and will be carefully dismantled in early July. Besides the complete line, the Multiweigh multihead weigher, elevator and other individual components are also available for separate purchase. The line has been used for packaging cherry tomatoes into shaker cups and is ideally suited for similar fresh produce applications. It is a reliable, hygienic and well-maintained solution for automatic weighing, filling and closing of plastic cups. Line Configuration - JASA Packaging Systems elevating belt - Type: TB BCK C83 - Year: 2013 - Plastic belt with flights - Elevating height: 2,800 mm - Multiweigh 14-head multihead weigher - Type: HDW 14 1.0 15KG - Year: 2011 - Weighing range: 22 – 1,000 grams - 4 discharge outlets - JASA cup denester - Filling station - JASA lid denester - Cup closing system - Markem-Imaje inkjet printer - Stainless steel conveyors - PLC controlled system - Stainless steel hygienic construction Applications The line was used for packing cherry tomatoes in plastic shaker cups, but is also suitable for products such as: - Grapes - Mushrooms - Snack vegetables - Fresh fruit - Other free-flowing fresh produce Key Features - Complete turnkey packaging line - Individual machines also available separately - Directly from production - Used until dismantling - Well maintained - Hygienic food-grade design - Ideal for fresh produce packaging - Available immediately after dismantling in early July The complete line can be inspected by appointment before dismantling. For additional technical specifications, photos, videos or pricing, please contact STC Food Solutions. Credjzh U Dkepfx Afnjf * Year: 2013 * Elevating height: 2,800 mm * Type: HDW 14 1.0 15KG

Condition: used, Year of construction: 2006, Overview  This complete filling line was manufactured in 2005 by German company Breitner Abfüllanlagen GmbH. The line is designed for mayonnaise, dressing and ketchup in glass and PEHD bottles with diameters up to 110 mm. It is reported to be in good condition. Information about the reason for sale and exact availability was not provided. Technical data - Capacity: - 212 ml round plastic: up to 2,700 bph - 250 ml oval plastic: up to 2,700 bph - 1,000 ml round plastic: up to 900 bph - 1,000 ml oval plastic: up to 900 bph - Application: - Glass & PEHD (plastic) - Neck finish: - Screw-on caps Ø 30–40 mm - Twist-off caps - Formats: - 212 ml, 250 ml, 1,000 ml Scope of Delivery  - Inductive Linear Filling Machine | Breitner | IDL 2047 | 2006 | 15–45 b/min - Conveyor | Breitner | TP 6052 | 2006 | — - Capping Machine | Breitner | VS 5012-S | 2006 | Up to 60 b/min - Rotary Sorter | Breitner | DS 8003 | 2006 | — - Feeder | Breitner | SFB 8001 | 2006 | — - Conveyor | Breitner | TPK 6042 | 2006 | — - Labeller | Breitner | EM 4322 | 2006 | Up to 70 b/min Cedpjyighiofx Afnerf - Conveyor | Breitner | TPE 6032 | 2006 | —