Used Sorma Brt 134 for sale (351)

Condition: used, Year of construction: 2006, Girsac net packing machine. Packing weight from 0.5 to 4 kg Klsdpsx Evu Usfx Anweu

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Used BRT Hartner BBS 16 Air Belt Separator Windsifter (Eggersman Company) Year 2014 Consists of 2 x 22kW fan units, 1.6m wide arched belt, expansion chamber, air filter unit Kodpfxey U Iivs Anwolu The BRT HARTNER BBS Air Belt Separator classifies the light fraction with its low specific weight from the heavy materials by air flow. Free-flowing mixed plastics and source materials for the production of substitute fuels are particularly suitable as input. For good separation results, the ratio of the smallest to the largest particle should be max. 1:4.

Condition: used, Technical data feed hopper with hydraulic moving floor and bag opener for recyclables from yellow bags and residual waste: Manufacturer BRT HARTNER GmbH Type HP5-3035 Year of construction 2015 Hopper volume 30 m³ Drive line 17.5 kW Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Condition of the machine: The feed hopper with bag opener was used at a large recycling plant, where recyclable materials from yellow bags or commercial waste were tipped into the hopper using wheel loaders, the bags were opened using the bag opener, and the recyclable materials were transported to a sorting plant or the commercial waste was transported in measured quantities for further processing. The system functioned flawlessly until it was dismantled and replaced with a larger system with higher throughput capacity. The machine was dismantled into individual parts in our workshop, partially overhauled, reassembled, and tested during operation. The following overhaul work was carried out and the following spare parts were replaced: Dismantling of the feed hopper and bag opener into individual parts. Cleaning, partial sandblasting, priming and painting of the steel parts. Various wear and cover plates were newly manufactured and installed. Cutting off the worn ends (approx. 40cm) of the push floor pipes. Welding on the new pipes and smoothing the push floor pipes. Replacement of all plastic sliding plates for the hydraulic push floor. Removal of the hydraulic unit from the push floor, emptying of the hydraulic oil tank, replacement of the oil filters, refilling with new hydraulic oil. Replacement of the three hydraulic blocks, all valves, the oil sight glass and all hydraulic hoses from the hydraulic unit. The seal kit and hydraulic hoses were replaced on all three hydraulic cylinders of the push floor. All six limit switches (proximity sensors) on the push floor were replaced. The conveyor chains on the left and right of the scraper conveyor were replaced. Seven carrier bars on the scraper conveyor were replaced. The drive motor for the ripper blades was replaced. All nine pneumatic cylinders for the pressure pipes were replaced. All pneumatic lines and connections were replaced. All of the plastic sliding plates for the hydraulic operation of the bag opener were replaced. The bag opener can be moved vertically so that the system can also be used for commercial waste or residual waste without the bag opener. The side impact protection plates on both sides were replaced. Klodsy Urtfopfx Anwju Various wear parts of the bag opener have been replaced. The entire system has been rewired and reconnected. The system control in the control cabinet has been retrofitted by the manufacturer BRT Hartner to a self-sufficient individual control system and the standard programme has been reloaded into the control system. The system has been commissioned and tested by the manufacturer BRT Hartner, see the function video. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: good (used), Year of construction: 1996, REF: MM5685 1 x Sorma Group automatic punnet netting machine. Model - PK8. Serial number - 1095. Date of manufacture - 1996. Speed - 35 packs/minute. Adjustable width of infeed conveyor by removing guides - 120mm to 140mm. Overall dimensions - 3.4m L x 1.1m W x 1.8m H. Kedpfxet Evzrs Anwolu

Condition: new, Faulhaber 3557K024C micromotor 30 / 1S 134:1 010678, unused, 100% functional, scope of delivery as shown in the photos. Klsdpfozffixsx Anweu

Year of construction: 2004, condition: excellent (used), functionality: fully functional, 2004 Elumatec AKS 134 Notching Saw – High-Precision Notching for Curtain Walls, Skylights & Conservatories Manufacturer: Elumatec Model: AKS 134 Year: 2004 Condition: Very Good Now available: Elumatec AKS 134 Notching Saw, manufactured in 2004 and in very good condition. This robust, German-engineered machine is purpose-built for precise notching in aluminium profiles, specifically designed for fabricators working on curtain walls, conservatories, skylights, and other complex architectural aluminium systems. The AKS 134 features a dual-saw unit design — vertical and horizontal — offering exceptional flexibility, accurate angles, and safe operation. Combined with digital angle displays, hydro-pneumatic feed, and automated cutting cycles, this is a premium choice for serious aluminium fabricators. 🛠️ Key Technical Specifications: 🔻 Lower Vertical Saw Unit: Saw Blade Diameter: 550 mm Tilting Range: +45° forward to -60° rear Max Cutting Height: 210 mm Motor Power: 3 kW (with motor brake) Speed: 2,800 rpm Manual Tilt Adjustment with Digital Display 400V, 3~, 50Hz 🔺 Upper Horizontal Saw Unit: Saw Blade Diameter: 500 mm Tilting Range: +55° down to -60° up Max Notching Depth: 190 mm Motor Power: 3 kW (with motor brake) Speed: 2,800 rpm Travel Distance: up to 830 mm Manual Tilt Adjustment with Digital Display 400V, 3~, 50Hz ⚙️ Machine Features: Dual saw blades for versatile and complex notching Workpiece stays fixed – only the saw units move, enhancing precision Simultaneous vertical saw unit height adjustment via handwheel (with analogue readout) Digital angle displays for both saws and pivoting back fence Manually adjustable support table Horizontal and vertical pneumatic clamping Automatic cutting cycle at 90° with two-hand safety control for angled cuts Hydro-pneumatic saw feed for smooth, consistent cutting Compressed Air Supply: 7 Bar (35–45L per cycle) 📏 Machine Dimensions & Weight: Footprint: 3000 × 1420 × 1600 mm Weight: 1,250 kg 🏗️ Ideal For: Aluminium façade and curtain wall manufacturers Skylight and conservatory fabricators Klodpfx Asxyupkonwou Precision aluminium notching applications Workshop environments needing multi-angle notching in high volumes 🧰 Reliable, accurate, and engineered for demanding tasks, the Elumatec AKS 134 is a proven performer in the architectural aluminium industry. Elumatec AKS 134 for sale Aluminium notching saw Ireland Curtain wall notching machine Elumatec saw for curtain wall systems Notching saw for aluminium profiles Elumatec AKS 134 specifications 550mm notching saw Double blade notching saw Used Elumatec machinery Aluminium construction saw Notes: *Specifications are given in good faith but not guaranteed*

Condition: new, INA x M-rail + V-rail + needle cage SN 42369-134 SET M6535x600 F-325147 87 K1203, unused, in sealed original packaging, 100% functional, scope of delivery as per photos. Ksdox Dw D Sjpfx Anwslu

Condition: used, Year of construction: 2004, Screen changer EREMA SW8/134 RTF Continuous partial area backwash filter with 4 carrier pistons (8 sieves) for heavily contaminated polymers Minimal pressure differences when backwashing or changing sieves The melt filter system meets the highest demands for fine filtration and is characterized by robustness, a high degree of automation and maximum availability, plus improved homogenization of the melt Main components: 1x continuous 4-piston backwash filter 1x control monitoring unit 1x operating unit for filter change 1x hydraulic unit System features: - Sieve diameter Ø 134mm - Active sieve area 1128cm² - fully automatic rinsing processes without interrupting production - Technical documents - Year of manufacture 2004 Subject to prior sale Please only send inquiries by email Kjdjualalepfx Anwslu Note: The machine is still installed and can be inspected on site. The buyer must dismantle it himself and organize the shipping. This is not part of the offer price.

Condition: new, functionality: fully functional, machine/vehicle number: NEW-15, empty load weight: 449 kg, maximum load weight: 901 kg, overall weight: 1,350 kg, axle configuration: 1 axle, loading space length: 2,560 mm, loading space width: 1,340 mm, loading space height: 1,500 mm, loading space volume: 5 m³, suspension: other, tire size: 185 R 14 C, maximum speed: 100 km/h, trailer brake: trailer braked, Year of construction: 2026, brakes: other, SARIS GO 256 134 150 1350 1 Box Trailer NEW VEHICLE Internal dimensions: 256cm x 134cm Internal height: 150cm Loading platform height: 54cm Gross vehicle weight: 1350kg Payload: 901kg Braked single-axle low-loader Overrun brake and handbrake by AL-KO 1350kg axle with brake Low chassis Fully welded, hot-dip galvanized steel frame 15mm phenolic plywood sidewalls and roof Interior: grey Exterior: white GRP layer Ideal base for wrapping or signage Rear double doors made of phenolic plywood with lockable latch Water drainage channel above the rear doors 15mm thick, slip-resistant and durable phenolic plywood floor Jockey wheel Integrated floor-mounted airline lashing rail (600kg tensile force) 4 moveable lashing points for airline rail LED interior light 14" reinforced C-rated tyres M+S tyres 13-pin plug Front marker lights Rear lamps with reversing light, rear fog lamp, and triangular reflector 2x wheel chocks OPTIONAL ACCESSORIES PERMANENTLY DISCOUNTED FROM FEBRUARY 2026 - Change internal height to 138cm or 180cm - Equipment for 100km/h (shock absorbers) - Spare wheel with holder - Loading ramps - Side door left or right, 72cm - Ramp instead of double doors, 750kg incl. lifting aid Kljdpfx Asghpb Senwsu - SARIS alloy wheels - Full LED lighting - Anti-theft device - Anchor rail with locking bar - Rear support stands Further accessories available on request! Plus shipping to Gera and vehicle registration document: €250 net Pictures are for illustration purposes and may show optional accessories subject to extra charge. Didn't find the right trailer? We always have 50–100 vehicles in stock and ready for immediate collection. Our workshop is open on weekdays from 8:00 a.m. to 5:00 p.m. for all kinds of repairs. Specialist for axle repair, including for caravan trailers. Large selection of rental trailers available. We also stock a wide range of spare parts and accessories for trailers of all manufacturers. Get advice by phone, visit our website, or come by directly.

Year of construction: 2026, condition: new, flat iron bender model BRT 100 Zopf Klodpefmy Ahsfx Anweu

Condition: used, Tempering Unit, Liquid Tempering Unit, Industrial Tempering Unit, Thermolator, Tool-Temp TT134, Used machine Manufacturer: Tool-Temp Type: TT 134 Overall dimensions: 390 x 1030 x 1070 mm Properties: Self-control system (microprocessor) Klsdpfx Anoy Uddpowsu Automatic drain system Temperature monitoring and indication Automatic water filling Remote and internal temperature control Automatic air vent Water and oil medium operation Max. Temperature: 140 °C | 18–24 kW Cooling: 50,000 kcal/h Max. pump pressure: 4 bar | 100 l/min

Year of construction: 2025, condition: like new (used), The machine is like new. The previous owner is out of business. Ksdpfxjy Rpyhs Anwslu

Condition: used, mileage: 134,894 km, power: 132 kW (179.47 HP), first registration: 12/2019, fuel type: diesel, tire size: 205/75/16, axle configuration: 4x2, fuel: diesel, color: grey, gearing type: automatic, emission class: euro6, suspension: steel, loading space length: 3,510 mm, loading space width: 2,110 mm, loading space height: 2,080 mm, Year of construction: 2019, Equipment: air conditioning, electric window regulation, navigation system, spoiler, trailer coupling, Cab: double Tyre size: 205/75/16 Kodpfxjy E I Tcs Anwolu Suspension: leaf suspension Rear axle: Double wheels Drive: Wheel Number of cylinders: 4 GVW: 3.500 kg = Additional options and accessories = - Roof spoiler

Condition: used, Tempering Unit, Liquid Tempering Unit, Industrial Tempering Unit, Thermolator, Tool-Temp TT134, Used machine Manufacturer: Tool-Temp Type: TT 134 Overall dimensions: 390 x 1030 x 1070 mm Year: 2012 Properties: Self-control system (microprocessor) Automatic drain system Temperature monitoring and indication Automatic water filling Klsdpfox Emd Tjx Anwju Remote and internal temperature control Automatic air vent Water and oil medium operation Max. Temperature: 140 °C | 18–24 kW Cooling: 50,000 kcal/h Max. pump pressure: 4 bar | 100 l/min

Condition: ready for operation (used), Year of construction: 2005, Circular Metal Saw manufactured in 2005. This Elumatec AKS 134 features a saw blade diameter of 550 mm vertically and 500 mm horizontally, with a maximum profile height of 250 mm and a maximum feed of 830 mm. If you are looking to get high-quality cutting capabilities, consider the Elumatec AKS 134 machine we have for sale. Contact us for further details. Klsdpfxsy H Ecds Anweu • Saw blade diameter (vertical): 550 mm • Saw blade diameter (horizontal): 500 mm • Maximum profile height: 250 mm • Maximum feed: 830 mm

Condition: excellent (used), Faceplate diameter 500 mm Weight 68 kg Bolt circle distance 134 mm Kjdpfofm Tqrsx Anwolu KKG diameter 96 mm

Year of construction: 2006, condition: used, Saw blade diameter (vertical): 550 mm Saw blade diameter (horizontal): 500 mm Max. profile height: 250 mm Ksdpfx Aneyybr Ujwslu Max. feed rate: 830 mm Digital angle displays for material stop and tilting of both saw units Pneumatic material clamps Minimum quantity spray device Hydropneumatic saw blade feed via 2-hand operation Weight: 1,000 kg

Year of construction: 2004, condition: not inspected (used), functionality: unexamined, machine/vehicle number: P04/034, SPARE PARTS DONOR!! - Non-functional device! Kljdpfx Asyymaqonwju EREMA SW4/134 RTF screen changer - Continuous partial-area backflush filter with 2 carrier pistons Main unit only, without accessories!

Condition: good (used), Complete trimming line with 2 trimmers RS 134 and a bump turn EM 130 Speed: up to 100.000 cph / 80 m/min (product permitting) min width product: ~122 mm max width product: ~530 mm min length product: ~122 mm max pagination product: 4-96p (product permitting) max thickness shingled stream: up to 13 mm infeed stream lap: ~25-100 mm min trim width: ~5 mm max trim width: ~65 mm min product width after trim: ~118 mm Infeed/delivery height: ~800 mm Trimmming line with 1st trimmer - right bump turn - 2nd trimmer Trimming line - 1st trimmer knife left Trimming line - 2nd trimmer knife left & right To be used with segmented knives Over all length equipment: ~1675 mm Over all width equipment: ~1530 mm Kedpfxsl Dn N Sj Anwolu Over all height equipment: ~1160 mm Input Power: 7,5 kW Voltage: 400 V, 3 Ph, N, PE Air requirement: practically no air requirement Suction capacity per nozzle: 900 m3/h, air speed 31m/s Weight: ~1100 kg per trimmer Optional equipment: second EM 130 bump turn

Condition: good (used), Year of construction: 2018, Machine from educational institute with 200 spindle hours Kledpfx Ajyh U U Ionwju Quaser MV 134 C Year of manufacture: 2018, Control: Fanuc Oi - MF, Travel X/Y/Z: 650/570/560 mm, Spindle speed up to 12,000 rpm, Taper: SK 40, Tool changer with 30 positions, Table size: 940 x 500 mm, Max. table load: 500 kg, High-pressure coolant through spindle (IKZ) / unused Chip conveyor, Rapid traverse 36 m/min,

Year of construction: 2007, condition: excellent (used), functionality: fully functional, machine/vehicle number: 1340020469, Mitre Saw Machine AKS 134/00 1 x Saw Blade Ø550mm Kodpfx Aox A D Ihjnwslu 1 x Saw Blade Ø500mm Equipped with digital angle setting readout

Condition: good (used), Controller, memory module, PLC controller, analog assembly, analog module, analog output, interface module, electronic modules, PLC controller, analog input module -Manufacturer: Siemens, Simatic S7 ET 200SP Analog Input Module with Base Unit -Type: 6ES7 134-6FB00-0BA1 -Base unit: SIMATIC ET 200SP 6ES7193-6BP00-0BA0 -Quantity: 1 module available -Dimensions: 120/20/H75 mm Kljdpfxex Tz Sbe Anwou -Weight: 0.1 kg

Condition: good (used), Controller, memory module, PLC controller, analog assembly, analog module, analog output, interface module, electronic modules, PLC controller, analog input module -Manufacturer: Siemens, Simatic S7 ET 200SP Analog Input Module with Base Unit -Type: 6ES7 134-6GB00-0BA1 -Base unit: SIMATIC ET 200SP 6ES7193-6BP20-0BA0 -Number: 3 modules available -Price: per piece -Dimensions: 140/20/H70 mm -Weight: 0.1 kg/pc Klodpfox Tz Ebox Anweu

Year of construction: 2025, condition: like new (used), Separator Terra-Star TSC.134, used, year of manufacture 2025 Maintenance-free, screening line 0- mm, mixing blocks M80X wear zones armoured with hardfacing wire. Application with mixing shafts: Mixing in lime or binding agents to dry soil, blending with compost, sand, other soils, etc. while simultaneously crushing soil clods. Aerating, shredding, tearing, and turning biomass, organic waste, and compost while simultaneously separating out branches, roots, etc. that cannot be shredded. Crushing friable stones from construction debris such as pumice, bricks, Poroton, while simultaneously separating pieces over mm in size; larger and hard parts remain in the separator. Feeding clumpy soil into a screen reduces waste and increases throughput. Kjdpfoyf Atvex Anwelu Equipped with OQ70/55. Price does not include adapter plate. For equipment returned from rental, the machine is inspected and comes with a 12-month warranty. For excavators from 12 t For wheel loaders from 8 t Weight in kg: 1200 Throughput: 50 m³/h Drain line connection required: 2 Series: TSC.134.018

Year of construction: 2025, condition: used, Separator Terra-Star TSC.134, used, year of manufacture 2025. Maintenance-free, screening size 0- mm, mixing blocks M80X welded with armored wire in the wear zones. Application with mixing shafts: - Mixing in lime or binder agents for soil drying, blending with compost, sand, various soils, etc., while simultaneously breaking up soil clods. - Aerating, shredding, tearing, turning biomass, organic waste, and compost while at the same time separating twigs, roots, etc. that cannot be shredded. - Fragmenting brittle stones in construction debris such as pumice, bricks, Poroton, while simultaneously separating chunks above mm in size; larger and hard parts remain in the separator. - Feeding lumpy soil into a screening plant reduces waste and increases throughput. Ksdeyf Atpepfx Anwelu Equipped with Lehnhoff MS10 adapter system. Price does not include top plate. On return from rental, the machine is inspected and comes with a 12-month warranty. Suitable for excavators from 12 t Suitable for wheel loaders from 8 t Weight (kg): 1200 Throughput: 50 m³/h Drain line required: 2 Series: TSC.134.015