Used Spot Welding Machine, Projection Welding Machine, Ac Resistance Welding Machine for sale (77,889)

Condition: used, AC spot welding machine, projection welding machine ARO Type MA 350 DC AC resistance welding machine Machine No. MA35031332 / 9731122B110 / Year of manufacture 1997 Power at 50% duty cycle 30 kVA Power at 100% duty cycle 21 kVA Maximum welding power 156 kVA Reach 550 mm Electrode arm diameter 60 mm Electrode holder diameter 25 mm Cylinder stroke max. 80 mm Electrode force max. 730 daN (at 6 bar), continuously adjustable Operating air pressure 0.5 to 6 bar Mains connection 400 Volt, 50 Hz Connected power 75 kVA / 63 Amps / Conductor cross-section 3x 16 mm² Possible sheet metal combination max. 5 mm + 5 mm - Welding control ARO Micro 2X16 III Version 6Z2P Type 1B (6 times - 2 programs) - Continuously adjustable welding current via thyristor module - Parallel electrode guidance - Double-stroke welding cylinder (pre-stroke / welding stroke) - Operating mode: single stroke and series of spots - Electrode force continuously adjustable via air pressure - Water-cooled via external water cooling (water chiller not included) - Electric foot switch - Control cabinet with control unit permanently mounted on the machine - PC interface RS 485 - Welding point counter - Operating manual for control unit, spot welding machine and electrical diagram available Space requirement W x H x D 520 x 1550 x 1150 mm Weight 290 kg Hjdpshpf Iysfx Akronu Very good condition

Condition: used, Spot welding machine, projection welding machine DALEX type PL 63 Serial No. N-0051390 Year of manufacture 2018 Output at 50% duty cycle: 63 kVA Output at 100% duty cycle: 44.5 kVA Maximum welding power: 182 kVA Rated welding current: 8.77 kA Throat depth: 250 - 550 mm Maximum arm spacing: 150 to (310 mm) Upper electrode arm diameter: 50 mm Lower electrode arm diameter: 60 mm Electrode holder diameter: 25 mm Electrode stroke max.: 65 mm Electrode force: 100 - 600 daN Operating air pressure: 1 to 6 bar Power supply: 400 Volt, 50 Hz Rated current: 158 A Hjdpfxsycv Sas Akrsnu Connected load: 137 kVA - Thyristor power stage - Welding control HARMS+WENDE - HWH MPS 10β - 5-stage control, single spot, series spot, 8 programs - Electrode force infinitely adjustable via air pressure - Parallel electrode guidance - Single-stroke welding cylinder - Water-cooled via external water cooling system (recirculating water cooler not included) - Electric foot switch - Control cabinet with controller fixed to machine - Operating manual Required space (L x W x H): 1150 x 700 x 1600 mm Weight: 335 kg As-new condition

Condition: used, Spot welding machine, projection welding machine, NIMAK Type PMP 5 / 35 Manufacturer's number: 88100, Year of manufacture: approx. 1988 Power at 50% duty cycle: 35 kVA Reach: 250 - 450 mm Working stroke: 40 mm Electrode force: 100 - 460 kp, steplessly adjustable Electrode force at 6 bar: 460 daN Operating air pressure: 2 to 6 bar Electrode arm: Ø 60 mm Electrode holder: Ø 30 mm Insert electrodes, cone: MK 2, Ø 17.78 mm Arm distance: 200 / 400 mm Adjustability of the electrode holder: 200 mm Connected load: 83 kVA Mains connection: 380 Volt, 50 Hz - 4-cycle control - Stepless power adjustment - Single-point and multi-point welding - Parallel electrode guidance - Water-cooled (without cooling unit) - Electric foot switch Space requirement L x W x H: 1200 x 650 x 1500 mm Hnsdpfehubgzex Akreu Weight: 300 kg Good condition

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, WELIDING WORK STATION SCHLATTER WITH NEW MIYACHI WELDING CONTROLS. 1. 56 kWA - SERIAL NR: PS1/3111/9955 - MIYACHI DIGITAL CONTROLS 2. 80 kWA - SERIAL NR: PS1/9231/9956 - ORIGINAL SCHLATTER ANALOG CONTROLS Included with safety glass and two button pust operational system. with all safety system integrated and working table. WELDING NOMINAL POWER - 56 kWA AT 50% THROAT IN 450mm Specifications Manufacturer SCHLATTER Model P1-42-11-22 1C VU122S S55S Year 1989 Hnsdovk Ukmspfx Akrju Condition Used Stock Number 0048 Connection 380V/50Hz S max 135 kWA Arm distance min /max 218/468 in mm Closing force 4KN Cooling water requirement 6 liter / min

Condition: new, Year of construction: 2005, functionality: fully functional, Description Manufacturer: Amada Miyachi Type: STA-100A Model Number: 1-1-BAKA -AEA-01 Serial Number: 17010009 Condition: Used, New AC Resistance Weld Control Easy to use programming interface For controlling and integrating projection welders, press welders, multi-gun machines, portable welding guns, seam welders, robotic systems, swing-arm welders and other special purpose machines. Examples: Consumer Appliances Nuts and Studs Projection Welding Electronics and Automotive Parts Aerospace Parts Office Furniture Hsdpfjwcax Eox Akrjnu Automotive Sheet Metal Input Power: 230-460 VAC Output Range: 1000-80,000 A Phase: Single Welding Period Range: 0-99 Description Manufacturer: Amada Miyachi Type: STA-100A Model Number: 1-1-BAKA -AEA-01 Serial Number: 17010009 Condition: Used, New AC Resistance Welding Controller Easy to use programming interface Used to control and integrate projection welders, press welders, multi-gun machines, portable welding guns, seam welders, robotic systems, swing-arm welders and other special purpose machines. Examples: Consumer appliances Nuts and studs projection welding Electronic and automotive components Aerospace components Office furniture Automotive sheet metal Input power: 230-460 VAC Output range: 1000-80,000 A Phase: single Welding period Range: 0-99

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 00117, type of input current: three-phase, nominal power at 50% duty cycle: 90 kVA, input voltage: 400 V, type of cooling: water, welding power (max.): 245 kVA, nominal power (apparent): 90 kVA, air pressure: 6.5 bar, input frequency: 50 Hz, Equipment: type plate available, TECNA 2117 industrial DC inverter resistance welding machine, manufactured in Italy in 2004. The machine was previously used in production for resistance welding of aluminum trays. It is offered as a complete welding system as shown in the photos, including the custom-built supporting base/workstation and the integrated water cooling/chiller system used for cooling the welding arms and electrodes. The machine is equipped with programmable electronic welding control, pneumatic electrode actuation, program selection, and water-cooled welding electrodes. Technical specifications: Manufacturer: TECNA Model / Item: 2117 Serial No.: 00117 Year of manufacture: 2004 Type: DC inverter resistance welder Supply voltage: 400 V Frequency: 50 Hz Phases: 3 Nominal power at 50% duty cycle: 90 kVA Maximum welding power: 245 kVA Secondary no-load voltage: 9.4 V Maximum welding current: 32 kA Maximum electrode force: 736 daN Water cooling requirement: 10 l/min Compressed air supply pressure: 6.5 bar TECNA machine net weight: 178 kg Equipment and features: Programmable electronic welding controller Multiple welding program selection Pneumatic welding head Copper welding electrodes Water-cooled welding arms/electrodes Custom-built supporting base/workstation Integrated water cooling/chiller system Pressure regulation and pressure gauge Emergency stop Three-phase industrial power supply The complete assembly shown in the photos is included in the sale, including the TECNA welding machine, control equipment, custom-built supporting structure, and cooling/chiller unit. Previously used in an industrial production environment for welding aluminum trays. The machine is currently installed on its supporting structure and is available for inspection in Greece. EXW Greece. Loading and transport are at the buyer's cost and responsibility. Hjdpfozx D Tcex Akrenu

Condition: used, Capacitor discharge welding machine MEGATRONIC, type CD-1200 / QB 2 / 6P Capacitor discharge welding with high currents and minimal welding times. Spot and projection welding machine The CD (Capacitor Discharge) welding technology works according to the principle of transformed capacitor discharge. Year of manufacture: 1993 Very high welding performance with a relatively small mains connection. - very short welding times, welding process with current rise and high welding current in milliseconds - no distortion or annealing - no significant heating of the edge areas, ideal for heat-sensitive components - welding of steels with high carbon content - welding of surface-coated workpieces Rated power: 12288 Ws Uc: 3200 Volt Capacity: 2400 µF Open-circuit voltage: 10 Volt Electrode force: 200-2000 daN, continuously adjustable Operating air pressure: 6 bar Mains fuse: min. 35 Amp. Operating current: 32 Amp. Mains connection: 400 Volt, 50 Hz - Programmable control unit megapuls CD-12000 - Parallel electrode guidance - Electrical 2-hand control panel located beside the machine - Control cabinet with control unit fixed to the machine Hnedeguvtdspfx Akrju Weight: 3000 kg Good condition

Condition: good (used), Year of construction: 2014, Tecna 3484 Universal Spot Welding System, 8 kVA Universal welding station, 8 kVA, manually operated welding gun, dual program. Simultaneous connection of two tools with automatic selection of the corresponding welding program, which saves time and avoids errors, ensuring a simple and safe workflow. Body repairs: Resistance spot welding of sheet metal, smoothing with a dent puller (pins and washers), localized heating (carbon electrode), screw and rivet welding, dent removal from stainless steel sheet metal. Synchronous SCR welding control, adjustment of welding time in cycles and pulses, adjustment of welding current and compensation function. Mains connection: 400V Mains frequency: 50 / 60 Hz Fuse: 25 A Rated power at 50% duty cycle: 8 kVA Max. welding power: 35 kVA Max. secondary current: 6.4 kA Hodpfel Smn Sjx Akronu Heat current 100%: 0.88 kA Year of manufacture: 2014 Weight: 85 kg More items – new and used – can be found in our shop! International shipping costs available upon request!

Condition: used, Spot Welding Machine DALEX Type SL 16 - 2 Machine No. ZZH/N-10183 Year of manufacture: approx. 2002 Rated power at 50% duty cycle: 16 KVA Maximum welding power: 50 KVA Max. throat depth: 500 mm Max. electrode force: 17 - 278 daN Electrode arm Ø 45 mm Hnodpfoy N Dukjx Akrou Electrode holder Ø 25 mm Arm spacing: 150 mm / 300 mm Operating pressure: 1–6 bar Open circuit voltage: up to 3.6 Volt Connected load: 37 kVA Mains connection: 400 Volt, 50 Hz - Weld control MPS 200-003 - Welding cycle triggered via electric foot switch - Water-cooled Required space (L x W x H): 1100 x 720 x 1450 mm Weight: 230 kg Very good condition

Year of construction: 2010, condition: good (used), functionality: fully functional, The Branson ultrasonic welder is used for joining plastic parts without the use of joining material. Frequency 20 kHz, power 1000-2000W, voltage 230 V AC, stroke 100 mm LxWxH: 400 x 500 x 1200 mm Hnjdpjvt Sc Eofx Akrsu

Condition: new, HAHN-Automation Type: BDE11154003 Resistance welding system The system is designed for the automated resistance welding of the following components: Housing + QLT Housing + Heater Service Unit P450 Welding pump + Flange P 800 The system is manually loaded and unloaded by an operator. Any other use of the system than that described above is not intended and is therefore not permitted! System layout Welding unit Sledge unit Cleaning unit for welding electrode Base Linear unit Analysis unit DMC Dimensions (l x w) mm 1700x1200 Cycle time sec. ≤ 30 - 35 Technical availability % ≥ 95 Operator 1 Voltage V 400 AC Frequency Hz 50 Control voltage V 24 DC Fuse A 50 Rated current A approx. 17 Compressed air supply bar 6 Year of manufacture 2020 System components - Control cabinet - Protective enclosure - Linear unit Timing belt axis Festo DGE-25-700-ZR-LKRV Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN Gear ratio i=5 Feed constant = 63 mm/rev Reference switch: BES 516-324-G-E5-C-S49 - Sledge unit Balluff BES M08EC-PSC15B-S49G - Evaluation unit DMC: Keyence SR-1000 - Welding unit Spindle axis horizontal Compact module CKK 110-250 without brake Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN i=1 p=5mm Integrated reference switch: Hall PNP normally closed Spindle axis vertical Compact module CKK 110-100 with brake Bosch servo motor: MSK030C-0900-NN-M1-UG1-NNNN i=1 p=5mm Integrated reference switch: Hall PNP normally closed Welding tongs Crede PSZ-K Controller: ST-T13V2.0 Power supply: LT-L05-T13V13.0 (5,000A) Water cooler: DLK 1002-C Interface: ProfiNet Proportional control valve block PVB V1.0 Adapter box AB V3.0 for SZ and PSZ Extraction system TBH GmbH GL 265 Z Flow monitor Turck GmbH & Co. KG FCS-M18-AP8X Condition: unused, machine has never been used in production Hnodjzd Rmgepfx Akrou Condition: used Scope of supply: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: excellent (used), functionality: fully functional, Description WE OFFER AN NICE CONDIUTION NIMAK WELDING GUN 22 Kwa power with balanser and top traverse rails. READY TO WORK. EASY TO OPERATE. Machine is still in production working Complete with balanser and traverse. Specifications Manufacturer NIMAK Model ZT 22/1 Condition Used Power 22 kwa Kuhl w. Q 4 L/MIN Hnjdpfjvk Ul Rsx Akrou

Condition: used, Spot and projection welding machine NIMAK type BMP 20/150 Spot welding machine, projection welding machine Mach. No. 81692 year of manufacture approx. 1980 Power at 50% duty cycle 150 kVA Clamping plate below 200 x 160 mm Clamping plate above 200 x 160 mm Hnsdpov Dxm Ssfx Akrou Power setting continuously variable Max. projection 150 mm Electrode force 200 - 2000 kp continuously variable Operating air pressure max. 6 bar Connection power 600 kVA Mains connection 380 volts, 50 Hz - Welding control DTW 4Z 2P - Single spots and series spots - Parallel electrode guidance - Water-cooled without cooling unit - Electric 2-hand control panel with emergency stop - Control cabinet with control permanently attached to the machine Space requirement L x W x H 1000 x 800 x 1800 mm Weight 900 kg good condition

Condition: good (used), Spot welding machine, spot welding system, spot welding gun, resistance spot welding machine, lever-operated spot welding machine, roller seam welding machine, projection welding machine -Manufacturer: Dalex, spot and projection welding machine with roller table Hnedpfoy Au Eyex Akrju -Type: PMS 14-4 -Rated power: 200 kVA -Protrusion: 740 mm -Operation: via foot pedal -Individual components: including documentation, see photos -Submission/Price: complete -Dimensions: Machine 2120/890/H1680 mm / Table 2730/800H1055 mm -Weight: 966 kg / 70 kg

Condition: used, Column resistance welding machine (spot welding machine) with a swing arm and mechanical drive, featuring a digital LCD multi-function control panel. Continuous and pulsed operation for welding steel, stainless steel, and galvanized sheets. Possible operating modes: EASY or EXPERT. Up to 20 individually configurable spot welding programs. Adjustment of spot welding current (%), spot welding time (cycles), pressure, and speed during electrode closing, as well as adjustment of the air flow to slow down the closing of the arms. Selection of various parameters of the spot welding cycle. The electrodes and arms must be cooled with liquid. Column resistance welding machine (spot welding machine) with a swing arm and digital microprocessor control. The digital LCD multi-function control panel enables the following operating modes: EASY (adjustment of spot welding current and spot welding time); EXPERT (adjustment of various spot welding parameters) with the ability to store up to 20 individually created programs. Continuous and pulsed operation ensures the best welds for different types of steel. Features: Spot welding current control (%), spot welding time (cycles), electrode closing force; Selection of various parameters of the spot welding cycle (holding time, ramp time, welding time, pause time, and pulse number); Easy-to-read LCD display; Mechanical drive via foot pedal; Adjustment of the arm span; Thermal protection with indicator. The electrodes and arms of this model must be water-cooled. CODE 824051 TWO-PHASE MAINS VOLTAGE 400 V MAINS FREQUENCY 50 / 60 Hz MAXIMUM SPOT WELDING CURRENT 16400 A MAXIMUM OPEN-CIRCUIT VOLTAGE 4.2 V MAXIMUM POWER CONSUMPTION Hnsdpfoz D Aa Ajx Akreu 60 kVA RATED POWER X=50% 25 POWER FACTOR 0.7 MAXIMUM WELDING THICKNESS FOR 2 SHEETS 5 + 5 mm MAXIMUM ELECTRODE FORCE 220 daN ELECTRODE PROTRUSION 330 mm DUTY CYCLE 5.5 % PROTECTION CLASS IP20 DIMENSIONS 79 x 32 x 128 cm WEIGHT 147 kg

Condition: good (used), Arm design: 270 mm Power: 125 kVA Hnsdpfx Aopy Dy Eokrou

Condition: ready for operation (used), Resistance Welding Machine, Resistance Welder, Meritus RAS 150 VSH, Used Machine Manufacturer: Meritus Type: RAS150VSH, MPW-RW 811-1410 Overall dimensions: 900 x 1370 x 2450 mm Electrical data: 415 V; 150 kVA; 50 Hz Hjderdf Acspfx Akrenu Equipped with light gate Tool water cooling

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: NS-009-0000-300, type of input current: AC, nominal power at 50% duty cycle: 250 kVA, throat depth: 300 mm, short-circuit current: 50,000 A, input voltage: 400 V, type of cooling: water, total width: 1,000 mm, total length: 1,000 mm, total height: 1,850 mm, overall weight: 1,000 kg, open-circuit voltage: 22 V, Zens Multifunction Resistance Welding Machine 250 kVA MF – 23 kN – 50 kA – Year of Manufacture 2013 For sale is a high-quality Zens multifunction resistance welding machine in a robust industrial design. The system was developed for demanding resistance welding processes and is ideally suited for series production in the automotive, supplier, electrical, and metal industries. The machine operates with modern medium frequency (MF) technology and achieves a welding power of 250 kVA at a 50% duty cycle. The powerful SER medium frequency inverter (700 A) enables a maximum welding current of 50 kA and ensures maximum process stability as well as reproducible welding results. With a maximum welding force of 23 kN and an overhang of 300 mm, the system is suitable for a wide range of resistance welding applications. Technical Data Manufacturer: Zens Machine Type: Multifunction Resistance Welding Machine Year of Manufacture: 2013 Welding Power: 250 kVA (Medium Frequency / MF) at 50% duty cycle Max. Welding Current: 50 kA SER Medium Frequency Inverter: 700 A Welding Control: SER-Mega1 Maximum Welding Force: 23 kN Overhang: 300 mm Equipment CE-compliant protective enclosure CE safety light curtain Welding table for welding forces up to 23 kN Pressure compensation tool QSF-M quality assurance system Position measuring system for process monitoring PLC control (Siemens S7) Robust industrial design for continuous industrial operation Hnsdezqucfopfx Akrou The combination of powerful medium frequency technology, precise force and position control, and modern PLC and SER welding control ensures high process reliability and consistently reproducible welding results. Thanks to the complete CE safety equipment, the machine can be easily integrated into existing production lines. The system is in good condition and can be inspected and demonstrated at any time by prior appointment.

Condition: excellent (used), Year of construction: 2019, We are selling a PCB spot welding system from AMADA, mounted on a workbench. The welding head is type FD 120-A/So, year of manufacture 2019. Hnsdpfx Aeyhwduokrju

Year of construction: 1991, condition: ready for operation (used), Dalex DR-F 2 0.35 m³/h 220 Volt Hsdpfx Akoftbtmjronu No. 109115732 Year of manufacture 1991 Refrigerant R12 – needs to be refilled.

Condition: used, Year of construction: 2022, operating hours: 10 h, functionality: fully functional, machine/vehicle number: NS-009-50Hz-11kN-300, type of input current: AC, nominal power at 50% duty cycle: 160 kVA, throat depth: 300 mm, short-circuit current: 25,000 A, input voltage: 400 V, type of cooling: water, total width: 1,000 mm, total length: 1,000 mm, total height: 1,850 mm, overall weight: 1,000 kg, open-circuit voltage: 15 V, Zens Multifunction Spot Welding Machine 160 kVA – 50 Hz – 11 kN – Year of Manufacture 2022 For sale is a Zens multifunction spot welding machine in a robust industrial design. The machine is designed as a 50 Hz alternating current system and is suitable for various spot welding applications. The machine features an integrated seam welding adapter. The corresponding seam welding heads are not included in the scope of delivery and can be purchased separately. Thanks to the modular design of the machine, it is possible to use different welding tools and applications. Technical Data Manufacturer: Zens Model: NS-009 Machine Designation: Multifunction Spot Welding Machine Year of Manufacture: 2022 Welding Technology: Alternating Current (AC), 50 Hz Welding Power: 160 kVA Hodpfx Aksztn Sxsrjnu Duty Cycle: 50% Max. Welding Force: 11 kN Welding Control: SER PLC Control: Siemens CE Safety: 2-Hand Control Seam Welding Adapter: Integrated Equipment Zens Multifunction Spot Welding Machine 50 Hz Alternating Current Technology Integrated Seam Welding Adapter SER Welding Control Siemens PLC Control Device Carrier System with Touchscreen 2-Hand Control as CE Safety Device Modular Machine Design Robust Industrial Design Available Separately The seam welding heads are not included in the machine's selling price and can be purchased separately. The "On Top" water cooling unit is also not included in the machine's selling price and can be purchased separately. The machine is in good condition and can be inspected and demonstrated by appointment. Note: Seam welding heads and the "On Top" water cooling unit are available separately and are not part of the machine offer. Subject to technical changes and errors.

Condition: good (used), – Power output: 15 kVA – Pneumatic – 380V Hjdpfezwkttsx Akronu

Condition: ready for operation (used), 6355 Resistance Welding Machine , Resistance Welding , Meritus RAS 150 VSH Resistance Welding Machine , Resistance Welding , Meritus RAS 150 VSH, Used machine Manufacturer : Meritus Hsdpfx Aou Nvh Uokrenu Type : RAS 150 VSH Overall dimensions : 1000 x 1620 x 2100 mm Weight : 840 kg Electrical data : 415 V ; 150 kVA ; 50 Hz - equipped with a photocell - tool water cooled

Condition: repair required (used), Full: 63 KVA Arm design: 400 mm Hnsdjpy Dx Ispfx Akrsu The machine is currently not working (control panel missing)

Condition: good (used), - Capacity 100 kVA - Pneumatic Hsdpfx Ajykcnqekronu - Throat depth 570 mm - 380 V