Used Stacker 1500 Kg / 3 M for sale (117,509)

Condition: new, Year of construction: 2026, Load capacity 1500 kg Lifting height 3000 mm Total mast height 3483 mm Nwodpfszr Ey Djx Agrel Battery voltage 24 V Battery weight 2×23.5 kg Battery capacity 85 Ah Drive motor power 0.75 kW Lift motor power 2.2 kW Travel speed (with / without load) 4.2 / 4.5 km/h Turning radius 1366 mm Fork length 1150 mm Maximum fork spread 700 mm Fork width 165 mm Total height (lowered forks) 1983 mm Own weight 560 kg Noise level < 70 dB(A) Wheel type Polyurethane (PU) Drive wheel Ø210 × 75 mm Load wheel Ø80 × 60 mm Stabilizer wheel Ø115 × 55 mm Wheel arrangement (front / rear, x = driven) 1x, 1/4

Condition: new, Year of construction: 2026, Load capacity 1500 kg Fork lift height 3000 mm Mast type Two-stage Fork length 1150 mm Fork width 550 mm Minimum fork height ≤ 90 mm Traction / lifting motor 0.75 kW AC / 2.2 kW DC Battery 24 V / 100 Ah (lead-acid) Battery weight 2×32.5 kg Charging time approx. 4 hours Nwedpfxezr E Dij Agrsl Charger power supply 230 V AC Travel speed (with / without load) 3.5 / 4.5 km/h Lift speed (with / without load) 100 / 155 mm/s Mast height (folded / extended) 2083 / 3568 mm Turning radius 1482 mm Weight 600 kg Operator platform: Foldable, with safety lock Noise level: < 70 dB(A) Wheel type: Polyurethane Drive wheel size: Ø250 × 80 mm Bearing wheel size: Ø80 × 60 mm Additional wheels (dimensions): Ø115 × 55 mm Wheel arrangement (front/rear, x = driven): 1x, 2/4

Condition: excellent (used), Approx. 1500 m² single-story steel platform Used, good condition, see pictures. Manufacturer: STOW Length approx. 58.5 m Width approx. 54.6 m Height (bottom edge) 3.4 m Height (top edge) 3.7 m Load capacity 500 kg/m² C-profile and Sigma-profile construction Fastened with screws and nuts Adjustable grid spacing in length Floor construction is 38 mm chipboard, highly compressed, tongue and groove Underside white, top side gray coated Negotiable price: Offer upon request! Partial sale possible! Dismantled and loaded. Goods are in stock. Transport costs available upon request. Inspection possible at any time by appointment. Further information available upon request. We constantly have over 5,000 linear meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, information and prices, as well as prior sale! See our terms and conditions, all prices excl. VAT, ex warehouse) Lenox Trading – Top warehouse technology & used & new heavy-duty racking Description: Are you looking for high-quality warehouse racking to buy? With approximately 100 employees, Lenox Trading is one of the largest dealers of new and used warehouse technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ PROMPTLY AVAILABLE: • Over 10,000 linear meters of racking promptly available Nodod S S N Repfx Agrewl • 20,000 m² of warehouse platforms & steel platforms immediately available • 30-50 semi-trailer loads of goods turnover weekly for maximum selection 📦 OUR ASSORTMENT (BUY CHEAPLY ONLINE): Whether pallet racking, heavy-duty racking, high-bay racking, shelving, tire racking or racking for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, disassembly and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / LIQUIDATION: • SSI Schäfer (Schäfer Lagertechnik, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, Heavy-duty racking Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi Cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND BUSINESS: ONLINE AUCTIONS & LIQUIDATION For disassembly and clearance orders, we offer a real all-round carefree package: 1. Lump-sum purchase: Purchase of merchandise, equipment & complete inventory including complete clearance. 2. Commission-based auction: Conducting auctions on behalf of others. Our full service is provided by our own employees: Cataloging, office preparation, inspection, goods dispatch, logistics, dismantling and complete handover. Whether you became aware of us through heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking system, we guarantee the best conditions. Contact us for a non-binding offer!

Condition: used, Year of construction: 2019, machine/vehicle number: AB00012078, functionality: fully functional, power: 20 kW (27.19 HP), input voltage: 380 V, input frequency: 50 Hz, cutting height (max.): 120 mm, saw blade diameter: 350 mm, actuation type: electric, rotational speed (max.): 4,200 rpm, total length: 2,100 mm, total width: 1,750 mm, total height: 1,600 mm, overall weight: 1,866 kg, table height: 900 mm, Equipment: CE marking, documentation/manual, saw blade guard, Band width 300 mm Maximum blade diameter 350 mm Minimum cutting length 390 mm Feed rate 6-48 m/min Blade holder device diameter 70 mm Spindle rotation speed 4200 rpm Exhaust port diameter 200+100 mm Spindle diameter: 50 mm Nwsdpfoz Enhzsx Agrel Bushing diameter: 70 mm Bushing equipped with spacer rings Centralized automatic lubrication Four upper pressure rollers Machine dimensions (L/W/H): 210 / 175 / 160 cm Equipped with: Laser device – projects the cutting line reference onto the workpiece. Mechanical device / programmable guide, controlled from the mobile screen, for laser-guided cutting. Some typical applications: - Trimming irregular edges without using a guide. - Selecting good portions on boards with knots or cracks, using a fast-moving guide and a single blade.

Condition: excellent (used), functionality: fully functional, load capacity: 1,500 kg, Equipment: foot remote control, 3-axis PEMA welding positioner APS 1500 - stepless height adjustment - includes hand-held remote control Nedoyupd Hepfx Agrewl - maximum load 15,000 N (1,500 kg) - rotation speed 0.07 - 1.3 rpm - rotational torque 1,000 Nm - hydraulic tilting up to 135° - tilting torque 3,000 N - max welding current 700 A - plate diameter 700 mm - height 780 - 1,550 mm - dimensions 1,640 x 810 mm - power supply 3 x 400 V / CEE 16A - weight 730 kg

Condition: like new (used), Year of construction: 2022, functionality: fully functional, load capacity: 1,500 kg, The Siegmund M positioner is ideal for welding, assembly and maintenance work. Positioning is carried out using a manually driven handwheel. Positioner with load capacities of up to 1,500 kg. Torque 900 Nm Handwheel with handle Ø 315 mm Nsdpfx Agevlgzaerswl U-angle compatibility System 28 Max. length of U-angle 3,000 mm A - Working height 850 mm B - Column height 955 mm C - Total height 1,140 mm D - Width of base plate 600 mm E - Length of base plate 600 mm Price does not include 3D accessories. Prices 3-D accessories, heavy cast parts, wall thickness 28mm, everything processed, special prices New: original angle 28 U-shape 500mm x 200mm x 200mm (surcharge 500.-€) or 2000mm x 200mm x 200mm (surcharge approx. 1000.-€) or 2400mm x 200mm x 200mm (surcharge 1300.-€) or with table top 28 hole, 2000mm x 1000mm x 200mm (surcharge 2000.-€) several positioners are available

Condition: like new (used), 1500 m² Schäfer R3000 warehouse racking system, 3 stories Used, in top condition, like new, see pictures. Ground floor: steel construction warehouse racking system, above: 2 floors of Schäfer shelving system Manufacturer: SCHÄFER R3000 CAD planning and assembly 3 stories Partial sale possible Negotiable price: upon request! Goods are in stock. Transport and assembly available upon request. Inspection possible at any time by appointment. Further information available upon request. We constantly have over 5000 linear meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, specifications, and prices, as well as prior sale! See our terms and conditions, all prices excl. VAT, ex warehouse). Lenox Trading – Top warehouse technology & used and new heavy-duty racking Description: Are you looking for high-quality warehouse racking to buy? With around 100 employees, Lenox Trading is one of the largest dealers of new and used warehouse technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 linear meters of racking immediately available • 20,000 m² of warehouse racking & steel construction racking immediately available • 30-50 semi-trailer loads of goods turnover weekly for maximum selection 📦 OUR RANGE (BUY CHEAP ONLINE): Whether it's pallet racking, heavy-duty racking, high-bay racking, shelving systems, tire racks or racks for IBC containers – we deliver and assemble throughout Europe with our OWN team! Including CAD planning, transport, disassembly and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / LIQUIDATION: • SSI Schäfer (Schäfer warehouse technology, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, heavy-duty racking Jungheinrich) Njdpfxohzw Hij Agrjwl • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND BUSINESS: ONLINE AUCTIONS & LIQUIDATION For disassembly and clearance projects, we offer a complete, all-round carefree package: 1. Fixed-price purchase: Purchase of merchandise, equipment & complete inventory including a thorough cleanup. 2. Commission auction: Conducting auctions on behalf of clients. Our full-service provided by our own employees: Cataloging, office preparation, inspection, goods handover, logistics, dismantling and thorough handover. Whether you found us through heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking systems – we guarantee the best conditions. Contact us for a non-binding offer!

Condition: new, New refrigeration compressor (compressor) from the renowned manufacturer Copeland. Condition: New – warehouse stock (old stock), with no signs of operation. The compressor is factory-prepared, protected, and equipped with safety labels. Identification data (from nameplate): • Manufacturer: Copeland • Type: D3RS/1500/EWM7000 • Catalog number: 606.110.14 • Serial number: 356784 (BBC-YORK) • Design: semi-hermetic • Application: refrigeration / air conditioning system • Configuration: Block 1 • Start-up: U. Direct start (direct-on-line starting) • Equipment: Oil sump heater (Kurbelwannenheizung) Electrical data (from Copeland nameplate): • Power supply: 3~ 50 Hz • Speed: 1,450 rpm • Volumetric capacity: 49.90 m³/h • Voltage: 380–420 V (Y) • Starting current (LRA): 117–129 A • Max. operating current (MRA): 28.8 A • Max. working pressure H/L: 25 / 20.5 bar • Test pressure H/L: 27.5 / 22.6 bar • Degree of protection: IP54 Njdpjyga Utefx Agrswl • Year: 1996 Oil (recommended): • Mineral: Fuchs KM / Suniso 3 GS / Capella WF 32 / Shell 22-12 The compressor is ideal as a new replacement part, for modernization of refrigeration or air-conditioning installations. Sale as shown in the pictures.

Year of construction: 2003, condition: used, We offer this used MAPLAN MHF 1500/300E Maplan MTF 1500/300 injection moulding machine, year 2003. Machine type: MHF 1500/300E Nodpfx Aoyf E Rwsgrewl Serial number: 20301386 Year of manufacture: 2003 Output power: 73 kW Voltage: 400 V Frequency: 50 Hz Number of phases: 3 Controller type: B&R - CP152 Panel type: Maplan PC 4000 - DOS Year of manufacture: 2003 Condition: ready for operation (used) Operating hours: 78,154h Description: Clamping force: 3000 kN Shot volume: 1500 ccm Tie bar distance, crosswise: 600 mm Tie bar distance, lengthwise: 600 mm Heater plate size (W/L): 550 / 630 mm Daylight between open platens: 640 mm Connected load: 73 kW Power supply: 3x 400V / 50Hz Machine dimensions (LxWxH): approx. 4.80 x 1.80 x 2.30 m Machine weight: approx. 7500 kg Input current type: standard industrial three-phase electrical connection Equipment: documentation If you have any further questions or require more information, please send us a message or call us.

Condition: refurbished (used), Year of construction: 2018, ALUMINIUM PRECISION HIGH-SPEED CUT-TO-LENGTH LINE 1500.3.12, made AUXMET Revamped and upgraded 2018 for aluminium. Thickness: 0,4 – 2 mm Coil width: 500 – 1.510 mm Exit sheet length: 500 – 4.000 mm Outer coil diameter: 800 - 1.800 mm Coil weight: 12 Tn N° of straightening rolls: 19 rolls Diameter of leveling rolls: 45 mm Nwsdpfx Agovtpdgsrjl

Condition: like new (used), Year of construction: 2022, Used HMZ-3 FR CNC miter saw with routing unit The miter line consists of: - a miter saw with a 5.5 KW braked motor and a 700 mm saw blade; - an infeed roller conveyor with a working length of 6,500 mm and a pusher unit; - an outfeed roller conveyor with a length of 6,000 mm; - an industrial computer with a 17” LCD color screen; - computer-controlled axes; - optimization software for importing Tekla/HSB CAD files, etc. Saw machine specifications: - motor power 5.5 KW; - saw blade diameter 700 mm, saw height 250 mm; - angle adjustment from 0 to 270 degrees; - noise level 81 dB; - combined guard/sound hood over the entire saw; - 2 dust extraction ports; - pneumatic material guiding system for the saw; - centerline adjustment 200 mm Infeed conveyor specifications: - robust steel construction. - working length 6,500 mm (- rollers with a diameter of approximately 50 mm and a load-bearing capacity of 125 kg each). - adjustable feet, 100 mm adjustment range. Outfeed conveyor specifications: - robust steel construction. - approximately 6,000 mm long. - equipped with an automatic scrap chute. Automatic positioning unit specifications: Nsdpozg Il Sefx Agrjwl - reading accuracy selectable: 1 or 0.1 mm. - positioning accuracy plus or minus 0.2 mm. - speed up to 80 m/min. - Servo motor with rack and pinion, driven by a frequency inverter. - steel guide with 8 adjustable bearings. Computer specifications: - Industrial computer with a 19” LCD touchscreen. - hard drive 200 Gb, and USB port. - network card and Windows 10. - special, H&M-developed, Dutch-language Windows software. - graphical display of the cutting pattern. - control from the office via a network or by importing a drawing program, e.g., HSB CAD. - integrated optimization module. Operation: A cutting list is created or called up on the control computer and activated. Then, the available lengths and quantities can be specified, so that the machine can optimize the cutting process. After that, the saw can be started, and the machine requests the desired length. The pusher is in the starting position, and the control system requests the correct length. After a start command is given, the pusher starts and the beam is pushed through the machine and automatically cut to the desired specifications. The cut product ends up on the outfeed table. Additional options on the machine: - Label printer with software and stand. - Supports for the saw (8 pieces). Routing unit The saw is combined with a routing unit with a 90-degree (vertical) stroke. Max. reach: - 150mm. Height - 120mm. Depth Dust extraction port for routing unit: 100mm.

Condition: used, machine/vehicle number: 008750, Position 1: introducer IMA-NOVIMAT/I/G80/440/R3 Position 2: Single Edgebanders IMA-NOVIMAT/I/G80/440/R3 Position 3: Panel Return Systems IMA-NOVIMAT/I/G80/440/R3 Nsdpfx Agsz Eyx Serowl

Year of construction: 2004, condition: used, We offer this used MAPLAN MHF 1500/300E1 Maplan MTF 1500/300, year of manufacture 2004. Machine type: MHF 1500/300E1 Serial number: 20401486 Year of manufacture: 2004 Rated connected power: 78 kW Voltage: 3~ 400 V 50 Hz Condition: ready for operation (used) Operating hours: 67,594h Description: Njdpjyf E Txsfx Agrowl Clamping force: 3000kN Injection volume: 1500ccm Tie bar spacing (transverse): 600mm Tie bar spacing (longitudinal): 600mm Heater plate size (W/D): 550 /630mm Daylight opening (open machine): 500mm Connected power: 78kW Power supply: 3x 400V/50Hz Machine dimensions (LxWxH): approx. 4.80 x 1.80 x 2.30 m Machine weight: approx. 7500kg Type of incoming current: standard industrial three-phase electricity supply Equipment: documentation If you have further questions or require more information, please send us a message or call us.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Ref. No.: LT-2418 Manufacturer: Okuma Model: Multus U3000 1SW-1500 Control: Okuma OSP-P300S-H Year of manufacture: 2014 Commissioning: 2.015 Language Keyboards / Software: International / English Country of origin: Japan Technical Characteristics: Capacity: Turning on bed: Ø 650 mm Distance between points: 1.500 mm Maximum turning diameter: Ø 650 mm Maximum turning length: 1.500 mm Bar pitch (main spindle): Ø 70 mm Bar passage (opposite spindle): Ø 70 mm Main spindle: Spindle diameter: Ø 140 mm Spindle nose (type): JIS A2-8 Spindle inside diameter: Ø 80 mm Speed ranges: 2 ranges, infinitely variable Spindle speed: 50 - 4.200 rpm Motor: 22/15 kW (30 min/cont) Opposing spindle: Spindle diameter: Ø 140 mm Spindle nose (type): JIS A2-8 Spindle inside diameter: Ø 80 mm Speed range: 2 ranges, infinitely variable Spindle speed: 50 - 4.200 rpm Motor: 22/15 kW (30 min/cont) X-axis: Stroke: 645 mm Rapid traverse: 50.000 mm/min Z axis: Stroke: 1,600 mm Rapid traverse: 50.000 mm/min Y-axis: Stroke: 250 [± 125] mm Rapid traverse: 40,000 mm/min W-axis: Stroke: 1,594 mm Rapid traverse: 30.000 mm/min B axis: Controlled angle: -30° to +210° (increment 0.001°) Rapid traverse: 30 rev/min Nwsdou U E Avjpfx Agrsl C axis: Controlled angle: 360° (0.0001° increment) Rapid traverse: 200 rpm Turret: Type: H1 Number of tools: 1 (L or M tool) Tool dimensions: Turning outside: 25 x 25 mm Turning inside: Ø 40 mm Milling head: Spindle speed: 50 - 12.000 rpm Speed ranges: 2 speed ranges, infinitely variable Motor: 25/19 kW (3 min/cont) Tool changer (ATC): Cone Toolholder: HSK-A63 Number of tools: 40 Max. diameter of adjacent tools: ø 90 mm Maximum diameter of non-adjacent tools: ø 130 mm Maximum tool length: 400 mm Maximum weight of each tool: 10 Kgf Dimensions and weights: Height of the machine: 2.905 mm Occupied floor area: 4,480 x 2,995 mm (4,480 x 2,995 mm) Machine weight: 16,200 kg

Condition: used, Pillar jib crane, indoor crane, workplace crane -Load capacity: 500 kg -with chain hoist: SWF type 50/F -Year of construction: 1980 -Main stroke: 4.5 m/min -Fine stroke: 0.75 m/min -Projection: 3000 mm -Total height: 3760 mm Nwodpefla Rnjfx Agrel -Hook height: 2940 mm -Swivel range: 360° -Transport dimensions: 3490/1100/H1400 mm -Own weight: 748 kg

Condition: used, mileage: 565,000 km, power: 243 kW (330.39 HP), fuel type: diesel, axle configuration: 4x2, wheelbase: 10 mm, fuel: diesel, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, loading space length: 8,150 mm, loading space width: 2,490 mm, loading space height: 2,650 mm, Year of construction: 2018, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, fog lights, navigation system, power mirror, spoiler, tail-lift, Year of manufacture: 2018 Front axle: Steering; Tyre profile left: 100%; Tyre profile right: 100% Rear axle: Double wheels; Tyre profile left inner: 100%; Tyre profile left outer: 100%; Tyre profile right outer: 100%; Tyre profile right outer: 100% Empty weight: 9.705 kg Carrying capacity: 8.895 kg GVW: 18.600 kg Tail lift: Dhollandia, 1500 kg APK (MOT): tested until 03/2027 Registration number: 41-BKR-3 = Additional options and accessories = - 3 Seats - Airbag - Air horn - Aluminium fuel tank - Camera system - Heavy duty engine brake - Lat to lath timbered Nwodjz Azr Djpfx Agrsl - LED- lighting - Lock diff - Radio - Rear air suspension - Reversing camera - Roof spoiler - Suspension seat 2x

Condition: good (used), Crane block, crane hook, load hook, single hook, lower block Nwedpfxowpfppj Agrol -Manufacturer: Verlinde, Crane hook: Crane hook type FEM 3 m -Load capacity: 3.2 t -Dimensions: 600/280/135 mm -Weight: 30 kg

Year of construction: 2026, condition: new, Bosporas Machinery | AYIKA is a manufacturer of coil processing lines, roll forming lines and press feeding systems, offering high-quality and customized industrial solutions. High-performance heavy-duty cut to length line designed for precise sheet cutting with advanced configurations and up to 20-ton coil capacity. TECHNICAL DETAILS Sheet Thickness: 0.5 – 3 mm / up to 4 mm (heavy-duty configuration) Coil Width: up to 1500 mm Coil Weight: up to 20 tons Cutting / Shear Type: Gear Driven Guillotine Shear, Pneumatic Clutch Eccentric Shear, Hydraulic Shear, Rotary Shear Line Speed: up to 40 m/min (depending on configuration) Leveling System: Multi-Rollers Fine Straightener, Precision Straightener (Leveler) Stacking System: Automatic stacker (single or double stack option) Material Type: CR, HR, Galvanized, Stainless Steel, Aluminium, Hot Rolled Steel, Cold Rolled Steel This heavy-duty cut to length line is designed for precise and efficient processing of steel coils with widths up to 1500 mm and coil weights up to 20 tons. The system ensures high accuracy, stable operation and long-term reliability in industrial production environments. The line consists of integrated units including hydraulic decoiler, coil loading system, leveling unit, feeding system, cutting unit, conveyor system and automatic stacking unit. CONFIGURATION & FLEXIBILITY The system can be configured based on production requirements and material specifications: 0.5 – 3 mm standard duty configuration up to 4 mm heavy-duty configuration Different cutting technologies can be applied depending on production speed, accuracy and material type: Gear Driven Guillotine Shear Pneumatic Clutch Eccentric Shear Hydraulic Shear Rotary Shear The line can also be designed with single or double loop pit systems to optimize line speed, material flow and plant layout. KEY FEATURES Heavy-duty design for 20-ton coils High precision sheet cutting Nsdpfxoyy R Rme Agrswl Advanced leveling system for flatness control Cutting options Automatic stacking and conveyor systems Robust mechanical structure for long service life ENGINEERING & PERFORMANCE The machine is built with a robust mechanical structure and high-quality components to ensure long-term operation under heavy-duty conditions. The precision leveling system eliminates internal stresses and improves flatness, enabling accurate and repeatable cutting results. Advanced automation and control systems provide stable operation, reduced operator dependency and efficient production management. OPERATIONAL ADVANTAGES Short lead time compared to European manufacturers High production efficiency and continuous operation Low maintenance requirements Flexible and customizable design Reliable performance in demanding industrial conditions APPLICATION AREAS Steel service centers Automotive and metal component production Construction and infrastructure materials General sheet metal processing OPTIONAL EQUIPMENT Double stacker system Vacuum stacking system Coil handling and transfer systems Advanced automation solutions *Images included in this listing show reference installations of similar cut to length lines (3 mm and 4 mm thickness ranges) successfully manufactured and commissioned in recent years across different countries. These references demonstrate our proven engineering capability, reliable manufacturing quality and international project experience.

Condition: excellent (used), Year of construction: 2008, operating hours: 39,000 h, functionality: fully functional, drilling depth: 1,800 mm, drill diameter: 30 mm, Manufacturer: SFT Model: TBM 3-1500 Machine type: Deep hole drilling machine with BTA system Drilling diameter: 15 – 30 mm Drilling depth: 1800 mm Chip conveyor: included Control: SFT / PS 100 incl. control cabinet Frequency inverter: included Oil sump: included Coolant tank: 2,500 liters oil Coolant pumps: 3 units, each adjustable to 40 liters, 100 bar Signal beacon: included Tailstock: rotating and adjustable according to drilling length Clamping: hydraulic clamping operation Drill spindle: speed regulation available Paintwork: light grey / blue Loading station: automatic door Machine footprint: 7,000 x 1,200 mm Filter footprint: 3,000 x 800 x 1,250 mm Commissioned: late 2007 Recurring maintenance according to manufacturer’s specifications Available: end of March 2026 Nwedpfx Agjynui Iorol Operation: 2/3-shift operation

Year of construction: 2026, condition: new, High capacity semi-finished coil slitting line available with fast delivery and turnkey configuration. Bosporas Machinery is a manufacturer of coil processing lines, roll forming lines and press feeding systems, delivering high-performance and customized industrial solutions worldwide. FAST DELIVERY ADVANTAGE Semi-finished machine with accelerated delivery possibility Main production stages already completed Delivery within approximately 75 working days Much shorter lead time compared to new production Special opportunity offer This coil slitting line is currently in semi-finished production status, offering an important delivery advantage for companies looking for faster commissioning and reduced lead times. Since critical manufacturing processes and major components are already prepared, the line can be completed and delivered significantly faster compared to a newly manufactured machine. The system is designed for high-capacity production and demanding industrial applications. It ensures stable operation, high slitting precision and reliable performance even under continuous heavy-duty working conditions. TECHNICAL SPECIFICATIONS Material Thickness: 0.3 – 3 mm Coil Width: up to 1500 mm Coil Weight: up to 20 Ton Slitting Speed: up to 40 m/min Slitting Accuracy: ±0.1 mm LINE COMPONENTS Hydraulic decoiler (20 Ton capacity) Hydraulic coil loading car Infeed system with straightener unit Slitting head with precision knife adjustment Scrap winding system Tension unit and separator system Hydraulic recoiler Exit system and automation ENGINEERING FEATURES High precision slitting performance Servo-supported and stable feeding system Robust slitting head with gearbox transmission Adjustable knife system for different slit widths Heavy-duty structure for industrial production Advanced automation system (HMI controlled) OPERATIONAL ADVANTAGES Faster delivery compared to newly manufactured lines Reduced investment waiting time Reliable and stable production Suitable for various materials (steel, aluminum, etc.) Competitive lead time advantage 24/7 after sales support APPLICATION AREAS Nwjdpfoyzbzrjx Agrjl Steel service centers Coil processing facilities Sheet metal manufacturers Automotive and construction industries

Condition: used, Year of construction: 2007, DEMAG Ergotech System 1300/1500-11500 injection moulding machine from 2007 with 13,000 kN clamping force, 110 mm screw diameter and 5,200 g shot weight. Equipped with a Wittmann DR 853 227 linear handling robot (2014) featuring servo B axis 270° and C axis 90°, plus 32 hot runner control zones for advanced multi-cavity production. Factory-configured with 4 hydraulic core pulls and 12 cascade circuits for complex technical moulding applications. CNC CONTROL Controller: Demag Ergocontrol CLAMPING UNIT Clamping force kN: 13.000 Tie-bar clearance (H x V) mm: 1.500 INJECTION UNIT Injection unit size (Euromap): 11500 Screw diameter mm: 110 Max. shot weight (PS) g: 5.200 MOULD FUNCTIONS & HANDLING Hydraulic core pull circuits: 4 Cascade / valve gate circuits: 12 Hot runner control zones: 32 Handling robot (model / year): Wittmann DR 853 227 (2014) Nwsdpfjzz Rw Hsx Agrol Robot strokes X / Y / Z mm: 1.600 / 2.500 / 3.500 Robot rotary axes (B / C): C 90° / B servo 270° DRIVE Max. hydraulic pressure bar: 190 Mains connection V / Hz / A: 3 x 400 / 50 / 348 + 201

Condition: excellent (used), Year of construction: 2020, PLASMA CUTTING TABLE WITH COMPRESSED AIR: TYPE REMOCUT II 1500-3000/105A PNEUMATIC ENGRAVER Njdoyug Enopfx Agrswl

Year of construction: 2009, condition: ready for operation (used), A complete Mixaco mixing system including an AZO multi-component weighing system is available. 1) AZO weighing system with an integrated scale on the hopper and an external precision scale. Media: 2, filling level query: available, interface: Mixaco, year of construction: 2009. 2) Mixaco mixing system, temperature control unit: available, mixing sequence: hot/cooling/trough, filling option: Big Bags/octabins. All units of this complete system were regularly maintained. Documentation available. An on-site inspection is possible. Nwjdpoy Nna Dsfx Agrjl

Condition: used, Year of construction: 2004, functionality: fully functional, The machine is used, but in good condition. Nwedszp Ik Tjpfx Agrol It can be inspected while in operation.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, overall weight: 3,050 kg, KUKA KRC4 linear axis – a high-precision, robust motion unit designed for industrial applications. Provides accurate control of movement sequences and serves as a central component in automation processes and robotic systems within production environments. Durable construction ensures consistent, reliable performance even under the most demanding conditions. Linear Track Model: KL 1500/3T LINEAR UNIT 8 METER Year: 2013 Controller Cabinet: KRC4 Length: 8 meters Condition: USED, well working Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands. We also offer custom engineering services and design for your specific production needs. Nsdpfx Aew I Ez Iogrswl ( Source: Kuka's Website )