Used Stahl** Typ 380/355/360 for sale (11,905)

Condition: good (used), Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping angle for workpiece clamping -Dimensions: W380/H355/L360 mm Gjdpfxsb A I Ige Aqgeuh -Surface: milled -Weight: 50 kg

Condition: used, Year of construction: 2006, API tube mill 355mm x14mm (A3801) is line to produce pipes for petrol industries so can be perfect solution for your company to grow up API tube mill (Made in China), Forming machine is made in Japan OD 114–355mm wall thcikness: 4-14.3mm steel grade: N80 tube length:6-15m standard: API 5CT N80 scope of supply: – slitting line; – tube mill; – two end facing machines; – two hydro testers; – 1 tube straightening machine, rolls (OD 114.3, 139.7, 219.1, 273.05, 323.9, 339.72 , 355.6mm) machine was made in 2006, stopped running in 2016. used seam annealer and HF welder, brand: Thermatool. Used slitter, Chinese brand. thickness: 4–14mm, N80, Q235, hot rolled steel. max coil width 1600–1700mm. Guodpfsv Hcwtjx Aqgjh 2+5 leveler DC motor: 55kw slitter DC motor: 160kw scope of supply: – coil car; – uncoiler (with 4 colums); – hold down roll; – peeler table; 2+5 leveler; – shear; – conveyor and loop; – guiding device; – slitter; – tension unit; – recoiler with support arm; – coil car; – approximate 12 slitting blades; – electric cabinet, hydraulic system. slitter is for tube mill

Condition: good (used), Hand wash basin, wash basin, welded-in basin, welded-in swivel basin -Stainless steel sink -Internal dimensions: 380 mm -Depth: 180 mm -Edge: 22 mm -Drain: Ø 54 mm -Quantity: 1x available Godpfx Aqob Uhm Usgouh -Dimensions: 425/H180 mm -Weight: 2.1 kg

Condition: as good as new (ex-display), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 0605.1283, TEMA flat vibrating screen Type OZB 90/360-55. Drive 2x Unbalance P= 2,1 kW. Screen deck width 900mm. length 3,600mm. Including: support frame (as visible in the picture). Guodpfx Aeqwclqoqgjh Is in good condition. Few running hours. Has always been used as a demo/test screen. Available immediately.

Condition: used, Year of construction: 2010, Technical data Manufacturer / model: C.M.E. S.r.l., Ideal I360 / type 1360 Serial number / year: Flow rate / operating pressure: 36 m³/h at 3 bar Maximum pressure: 4 bar Motor power / speed: 5.5 kW / 2,900 rpm Dimensions (L × W × H): 1,350 × 730 × 960 mm Weight: approx. 325 kg Connections: DIN 65 according to DIN 11851 Product-contact materials: AISI 316 stainless steel and NBR elastomers Suitable media: wine, destemmed grapes, must, vinegar, oil, juices, and fruit/vegetable pulp Maximum fluid temperature: approx. 70 °C Performance curves: not available Spare parts: see the operating and maintenance manual with spare-parts catalogue Gjdpfx Aqjz R Dhvogjuh Machine-specific operating data according to C.M.E.; dimensions according to the “Ideal 360” manual.

Condition: like new (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: WJ-MKS315, overall weight: 213 kg, type of input current: three-phase, input voltage: 400 V, Special offer: WEIBERT steel circular saw MKS 315 incl. 2 roller conveyors For sale is a WEIBERT steel circular saw, model MKS 315, including 2 roller conveyors. Gjdjz Rm U Ejpfx Aqgjuh The sale is part of a company liquidation and is offered at a special price. • Machine: WEIBERT steel circular saw MKS 315 • Accessories: 2 roller conveyors (1 piece 5200 mm, 1 piece 2200 mm) • Shipping: By arrangement and for an additional charge An interesting opportunity for commercial and industrial companies looking to purchase a steel circular saw at an attractive price. If you are interested or have any questions, please do not hesitate to contact us.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,816 kg, maximum load weight: 33,184 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 11,250 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Fliegl 45 ft Container Chassis Tailor-Made Transport Solution Configure your Fliegl vehicle according to your individual requirements. The vehicle shown is an example. Production and equipment are customized to customer specifications. Chassis High-strength fine-grain steel welded chassis Fifth wheel with replaceable 2" kingpin and two kingpin positions Container locking system for: Rear extension retracted: 1 × 20 ft container (flush with rear, reduced kingpin load) Rear extension – Position 1: 1 × 30 ft, 2 × 20 ft, or 1 × 40 ft container with gooseneck tunnel Rear extension – Position 2: 1 × 45 ft container with gooseneck tunnel and rear overhang No rear height adjustment and no folding center supports; containers without a gooseneck tunnel cannot be transported Front locking adapter for securing containers without a tunnel from below, including storage bracket Roller-mounted rear extension with manual crank 24 t two-speed landing gear, single-side operation Two wheel chocks with holders Aluminium side underrun protection Galvanized steel rear underrun protection Extendable rear underrun protection for 45 ft containers Half-shell mudguards EC-compliant anti-spray mud flaps Rear impact protection Axles & Suspension SAF disc brake axles with 430 mm brake discs Laser-aligned axle and suspension system for reduced tire wear and lower fuel consumption Offset axle spacing for combined transport (GCW up to 44 t) Air suspension Automatic lift axle on the 1st axle with forced lowering and traction aid (activated by braking three times). Traction aid operates up to 30% axle overload and a maximum speed of 25 km/h. Gusdpjzlkiwjfx Aqgsh Braking System Dual-line pneumatic braking system Color-coded air lines for easier servicing Spring parking brake Two interchangeable coupling heads at the front (without connecting hoses) Electronic Braking System (EBS) with front EBS socket (without connecting cable) Trailer may only be operated with towing vehicles supporting ABS functionality Raise & lower valve Vehicle Stability System (RSS) Axle load monitoring via EBS CAN bus for display in the truck cab (truck preparation required; not a calibrated weighing system) Wheels & Tires 385/55 R22.5 tires, manufacturer's choice Steel wheels, factory silver Electrical System 24 V electrical system Multi-chamber lights with LED tail and brake lights Yellow LED side marker lights (On certain tractor units, diagnostic messages may occur although all lighting functions correctly.) Two white front position lights Two red/white rear outline marker lights Two 7-pin front sockets (without connecting cables) Operating Information When transporting a 45 ft container with a short tunnel, with or without the front extension, the maximum permitted kingpin-to-rear-end dimension and the legal overall vehicle combination length of 16,500 mm are exceeded. The rear underrun protection must be extended manually. A special permit in accordance with §70 StVZO is required. Registration & Approval Registration country: Germany DEKRA approval and inspection certificate (according to §13 EC-FGV) 24/7 service hotline Prepared for single-line license plate holder ECE R48 contour markings (white on the sides, red at the rear) Finish Hot-dip galvanized chassis including passivation 15-year anti-corrosion warranty Landing legs with black coating

Year of construction: 1999, condition: defective spare-parts repository (used), functionality: limited functionality, machine/vehicle number: T4-0899, Excel-Csepel DFS 380 lathe (T-400/600) with Sinumerik 810D/CNCkon, year of manufacture 1999 – machine for hobbyists Condition: operational, but for sale only as a hobbyist/repair machine – no guarantee of continuous functionality Year of manufacture: 1999 Location: Western Saxony Price: negotiable Technical data: Manufacturer: Excel Csepel Machine Tools Ltd. (Hungary) Gsdpfx Aqjzw Ea Iogsuh Type: DFS 380, nameplate designation T-400/600 Machine No.: T4-0899 Control: Siemens Sinumerik 810D with CNCkon Total connected load: 30 kW Connection values: 3×400 V / 50 Hz, control voltage 230 V AC / 24 V DC Max. turning diameter over bed: 535 mm / over slide: 380 mm Travel X: 230 mm, Z: 1,115 mm Main spindle drive: 18.5 kW (100% duty cycle), speed 35–3,500 rpm Spindle head A8 according to DIN 55026, spindle bore 82 mm, max. bar diameter 70 mm Feed axes: FANUC AC servo motors, rapid traverse X 15 m/min, Z 20 m/min Turret: TOEM 200 „06“, 12 tool positions, tool holder DIN 69880, Ø 40 mm Tailstock: hydraulic, stroke 150 mm, internal taper MK4 Weight: approx. 8,300 kg, dimensions L×W×H: 3,690 × 1,750 × 1,900 mm Condition/Special features (technical honesty): The machine is fundamentally operational and, thanks to the integrated correction electronics (CNCkon), is in principle very accurate. However, this accuracy is impaired by existing spindle play (approx. 2–3 hundredths of a mm). The machine is therefore primarily suitable for experienced buyers who are willing to repair or rework the spindle play themselves. Therefore, it is explicitly sold as a hobbyist/self-repair machine, without any assurance of permanent production suitability. Description: For sale is an Excel-Csepel DFS 380 lathe (nameplate T-400/600), year of manufacture 1999, with Siemens Sinumerik 810D control and CNCkon correction electronics. The machine is functional and runs, but has a spindle play of approx. 2–3 hundredths of a mm, which limits the achievable accuracy. Suitable for technically skilled buyers or as a hobbyist/spare parts machine. Further technical data see above. Inspection at the location in Western Saxony possible by arrangement. Sold without guarantee and warranty, negotiable. Other machines available from site clearance Site takeover negotiable

Condition: new, neu 00758 Polen 1500 € 1 Godpfszkvu Aex Aqgeuh The BISON 3544-200-5-P is a 3-JAW PRECISION FLAT-SPIRAL CHUCK with a diameter of 200 mm (8 inches) and an integrated size 5 Camlock short-taper mount in accordance with DIN 55029. The suffix ‘P’ (Premium/Precision) denotes the highest accuracy class (Class 1). KEY TECHNICAL FEATURES: * Chuck type: 3-jaw centring chuck (self-centring). * Body material: Robust, forged steel for high speeds and a long service life. * Mounting: Camlock Type D (DIN 55029), taper size 5. Mounting is carried out directly via the stud bolts on the machine spindle, without the need for an additional flange plate. * Accuracy class: Precision class (First Class Accuracy / Class 1). * Through-bore: Yes, with a clear passage of 55 mm. * Jaw type: One-piece, hard solid jaws. The scope of supply includes one set of drilling jaws and one set of turning jaws as standard. QUALITY FEATURES * Durability: Hardened and ground working and guide surfaces ensure repeatability over the long term. * Smooth running: A balanced flat spiral reduces vibrations to a minimum at high speeds.

Condition: good (used), workbench, work table, assembly bench -Width: 1530 mm -Depth: 800 mm -Height: 860 mm -Weight: 110 kg Guedpfx Aqszzqqgogjh

Condition: new, functionality: fully functional, empty load weight: 4,780 kg, maximum load weight: 33,220 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 11,250 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Chassis, Saddle, and Container Fine-grain steel welded construction, saddle plate with 2 replaceable kingpins and 2 kingpin positions Container mounts: Rear extension retracted: 1 x 20 ft, flush at the rear, low saddle load Rear extension extended, 1st stage: 1 x 30 ft, 2 x 20 ft, 1 x 40 ft with gooseneck tunnel Rear extension extended, 2nd stage: 1 x 45 ft with short gooseneck tunnel and overload to the rear Rear extension extended, 2nd stage + front extension, 1st stage: 1 x 45 ft with long gooseneck tunnel and angled corners with height adjustment at the rear and folding center supports for containers without a tunnel Container guide at the front, pluggable and removable Plug adapter for front locking, to lock containers without a tunnel from below, with holder when not in use Front extension on rollers, manually extendable (for 45 ft containers with long tunnels) Rear extension on rollers, with hand crank 24 ton, 2-speed support winch, single-sided operation 2 chock blocks with holder Aluminum side impact protection Galvanized steel underrun protection Extendable underrun protection for 45 ft containers Half-shell fenders with anti-spray flaps according to EG Rear impact protection Axles and Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-aligned, reducing tire wear and fuel consumption Offset axle spacing mm (combined transport), up to 44 tons gross vehicle weight Air suspension 1st axle: automatic lift axle, including forced lowering and start-up assistance, activated by 3x braking (start-up assistance is functional up to an axle load exceeding 30% and up to a speed of max. 25 km/h) Braking System 2-line pneumatic braking system, color-coded lines for easy servicing Spring-loaded parking brake 2 fail-safe coupling heads at the front, without connecting line EBS, Electronic Braking System with EBS socket at the front, without connecting cable Gusdsi Rizuepfx Aqgoh Note: The trailer may only be towed by tractor units that guarantee the effectiveness of the ABS! with lift and lower valve + auto-reset function Vehicle - Driving Stability System Axle load detection via EBS-Canbus signal, for display on the display in the driver's cab, the truck must be appropriately prepared Wheels and Tires 385/55 R22.5, manufacturer's choice Steel rims, factory silver Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the side 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole fail-safe sockets at the front Operating Instructions Special permit required if the overall train length exceeds 16,500 mm. When transporting 45 ft containers with a short tunnel, with or without a front extension, the permissible system length from kingpin to the rear edge of the vehicle and the overall train length of 16,500 mm will be exceeded! The underrun protection must be manually extended! An exemption permit according to § 70 StVZo is required! Approval / Signage Germany Type approval according to EG 2007/46 24/7 service hotline prepared for single-row license plate holder Warning sign according to ECE - 70 Contour marking with reflective tape

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Manufacturer: Speidel Tank and Vessel Construction Year of manufacture: 2020 Technical specifications: Net capacity: approx. 1,250 liters Material: Stainless steel 1.4404 / AISI 316L Design: insulated (with thermal jacket/insulation jacket) Internal surface: suitable for food/pharmaceutical use Operating pressure: atmospheric (storage tank) Temperature range: suitable for temperature-controlled media Connections: hygienic clamp fittings Manway: available Bottom: conical (complete drainage) Legs: height adjustable Application: The tank is ideally suited for the storage of pharmaceutical, cosmetic, or food-grade liquids. The tank was used as a CIP vessel in a pharmaceutical facility and was operated under hygienic conditions accordingly. Typical applications include: - Intermediate storage of bulk goods - CIP feed tank - Storage of alcohol, cleaning, or disinfectant solutions - Process integration in filling lines Construction: - Premium stainless steel construction (316L) - Insulated tank for temperature-controlled processes - Hygienic design with clamp fittings - Conical bottom for complete residue drainage - Industrial-grade build from German manufacturer Speidel Condition: Gusdpsy I Skwefx Aqgjh - Very good condition - Used, well maintained - Immediately available FAT / Documentation: - Operation manual available - Manufacturer documentation included Scope of delivery / Documentation: - Complete stainless steel tank - Insulation jacket - Documentation / operation manual - Nameplate present Special features: - German brand quality (Speidel) - Suitable for pharmaceutical, cosmetic, and food applications - Ideal as a CIP feed or buffer tank - Compact design with high quality

Condition: good (used), functionality: fully functional, Year of construction: 1995, machine/vehicle number: 12 28 895, total height: 2,500 mm, total length: 3,000 mm, total width: 1,000 mm, load capacity: 400 kg, main lifting speed: 8,000 mm/min, fine lifting speed: 33 mm/s, throat depth: 2,800 mm, working height: 2,500 mm, Technical specifications Manufacturer: STAHL Fördertechnik GmbH Type: T202 Load capacity: 400 kg Year of manufacture: 1995 Supply voltage: 380 V / 3-phase / 50 Hz Lifting speed: 8 / 2 m/min Motor power: 1.3 / 1.1 kW With pendant control, chain and hook Complete with column-mounted swivel arm STAHL lifting equipment is reliable and durable, even in industrial environments. The T202 model, a 400 kg chain hoist, is known for its lifting speed of 8/2 m/min. Condition Used, industrial equipment in good condition. Sold in the complete condition as shown in the pictures. Price: 1,000 EUR STAHL 400 kg Electric Jib Crane with Electric Chain Hoist – 1,000 EUR Description For sale is a STAHL electric jib crane complete with an electric chain hoist, pendant control and lifting chain. The unit is in good used condition and is ready for operation. STAHL is a well-known German manufacturer of high-quality industrial lifting equipment, recognized for its reliability and long service life. Technical Specifications Manufacturer: STAHL Fördertechnik GmbH Model: T202 Load Capacity: 400 kg Year of Manufacture: 1995 Power Supply: 380 V / 3 Phase / 50 Hz Lifting Speed: 8 / 2 m/min Motor Power: 1.3 / 1.1 kW Electric Chain Hoist Pendant Control Included Lifting Chain and Hook Included Complete Jib Crane Assembly Condition Good working condition Complete unit Ready for installation Industrial quality German equipment Included Electric chain hoist Jib crane Pendant control Lifting chain Hook Price: €1,000 Location: Hungary Seller: Variflux Kft. Godpfx Aqozkam Aegsuh

Condition: new, machine/vehicle number: C-CL-360-FR-EC, functionality: fully functional, input voltage: 230 V, volume flow: 390 m³/h, noise level: 58 dB, total height: 1,190 mm, total length: 900 mm, total width: 550 mm, warranty duration: 12 months, Equipment: type plate available, ISI C-CLEANER Mechanical air filter device Type: 360 FR Design: Mobile Control: without Horizontal, mobile mechanical air cleaner with EC radial fan for separating gas and solids. TECHNICAL DESCRIPTION: Air volume: - 390 m³/h (free blowing) - 360 m³/h (effective) (depending on the filter configuration without capture elements) Air inlet: with baffle plate as pre-separator Filter configuration: - Filter cartridge made of polyester fleece (dust class M) - Pre-filter mat G4 - Suspended matter filter H13 - Activated carbon cassette refillable with 3 kg In order to achieve a consistent suction power, the filter cartridge can be cleaned at regular intervals using compressed air via a ball valve. Color: RAL 7035 light gray (optional: special color) Voltage: 230 V Frequency: 50Hz Protection class: IP54 Fan technology: energy-saving EC technology Air output: adjustable Noise level: 58 db (A)) Dimensions: length 900 mm / width 550 mm / height 1190 mm Gsdjvrw T Hopfx Aqgouh

Year of construction: 2001, condition: excellent (used), For sale: Costa A1 ACT 1150 belt grinder, year 2001. Configuration: soft cylinder with electronic segmented pad. Working width: 1150mm Belt dimensions: 1180x2620mm Pressure rollers for short workpieces. Fan for creating negative pressure, included. Air blast for both units. Total weight: 2500 kg 2 motors: 7.5 kW and 15 kW Godogq U R Njpfx Aqgouh Total power: 27 kW Very good condition, machine is regularly serviced. Available immediately.

Condition: good (used), STAHL T36/4 Pharmaceutical Folding Machine Gujdoz R Iqhjpfx Aqgjh Made in Germany. The world’s highest-class folding machine. Very good condition. Infinitely variable feed and folding speed adjustment. Module with 4 cassettes. Elevator feeding (high pile). Electronic delivery with speed control. The machine is ideal for folding pharmaceutical leaflets thanks to its low fold and large number of cassettes. Cassette soundproofing. Technical specifications: Max size: 360x550mm Min size: 80x100mm Weight: 350kg 380V power supply

Condition: excellent (used), Year of construction: 1982, machine/vehicle number: EM518, Technical specifications: 1 Vetter TYPE B Demag column-mounted slewing crane, capacity 2500 KG, with wire rope hoist Useful load at full outreach: 2500 KG / 2.5 tons Height: approx. 6.65 m Outreach of jib: approx. 5.2 m Outreach: approx. 11.5 m !!! Hook height: approx. 4.3 m Gjdpfxezk Tngo Aqgeuh Total weight: approx. 5000 kg Column diameter: approx. 100 cm! With steel wire rope hoist, capacity 2500 kg Slewing range: 360° Crane is dismantled and available immediately Item location: 75053 Gondelsheim Other cranes are available, with load capacities of 80-5000 kg, please inquire. See images. Shipping via freight forwarder or collection by appointment only.

Condition: used, Stehendbogenauslage mit integrierter Pressfunktion und Markiereinrichtung Horizontal stack delivery with pressing and marking device Stehendbogenauslage / Horizontal stack delivery Stahl SBP-M 46.D Baujahr 1997 - Serien-Nr. 99836/97-255555 Format / Size min. (Breite × Länge) 120 × 100mm Format / Size max. (Breite × Länge) 460 × 300mm Produktdicke / Product thickness max. 4mm Stapellänge / Stack length 800mm Presskraft / Pressing force 8.000 N  Einlaufhöhe / Infeed high 360-960mm Gujdpfsxr T Amjx Aqgjh Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Year of construction: 1969, condition: good (used), Steel chain hoist, type T 302, 400 volts, 2 lifting speeds, chain length 3 meters. Gjdpfx Asd E Akksqgjuh

Condition: not inspected (used), functionality: unexamined, Year of construction: 1996, machine/vehicle number: 54 10 544, load capacity: 6,300 kg, power: 7.8 kW (10.61 HP), main lifting speed: 41 mm/min, 2x Stahl cat 6,300 kg center-to-center distance: 1,400 mm wheel track: 50 mm length between wheels: 1,800 mm total length: 2,000 mm Gjdpfx Aqjzun Rqegjuh price per unit

Condition: excellent (used), Year of construction: 2021, machine/vehicle number: 192378-16-001, total length: 6,000 mm, total width: 2,400 mm, total height: 2,750 mm, overall weight: 6,000 kg, Equipment: type plate available, Contact Oven "Hitec", type BG 600-3600 E continuous grilling line All stainless steel with lower and upper belt: lower and upper heating Belt temperature adjustable separately Guedpfewxvqpsx Aqgoh Mesh length: 3,600 mm Belt width: 600 mm Electrically heated 136 kW Belt washing system Temperature range from 50 to 260°C Adjustable speed Dimensions (L x W x H): approx. 6,000 x 2,400 x 2,750 mm year: 2021 Condition: Like new

Condition: used, Year of construction: 1997, Falzmaschine - Folding Machine Stahl T 36/6-6-KBBaujahr / Year 1997 Godpfoq I Tbajx Aqgsuh Flachstapelanleger / Flat Pile Feeder Falztyp: 6 Taschen - 6 Taschen - Schwert Folding Type: 6 buckles - 6 buckles - 1 knife Format / Size: min. 80 x 100mm - max. 360 x 650mm Papiergrammatur / Paper weight: 40 – 250g/m² Stapelhöhe / Pile height max. 580mm Geschwindigkeit / Speed min. 10 m/min. - max. 160m/min. Durchmesser Falzwalzen / Diameter of folding rollers 32mm Auslage Schuppenauslage / Delivery Stream Delivery Kompressor / Compressor include - Manuals Included Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: excellent (used), functionality: fully functional, Year of construction: 1996, machine/vehicle number: EM263 - IS4091, Steel crane, overhead crane, bridge crane, workshop crane Payload / lifting capacity 6.3 t - 6300 kg Gauge 11,390 mm, overall dimension approx. 11,550 mm TYPE EL-C 63 - 11.205 E Year of manufacture 1996 Lifting height 6 m Overall height from top of crane to hook approx. 950 mm Head girder length with buffer approx. 2180 mm With floor-mounted control Gjdpfezv H Ecex Aqgsuh Crane is disassembled and immediately available Very good condition, see pictures Column-mounted swivel cranes and wall-mounted swivel cranes are also available Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000, etc. Shipping via freight forwarder is possible, please inquire with your postal code Collection preferred

Condition: good (used), Faceplate, faceplate chuck, four-jaw chuck -Handover in its current condition as inspected -Mouth size: Ø 500 mm -one threaded insert is missing -all 4 cheeks are missing -Cone: Ø 105 mm -Through hole: Ø 80 mm -Bolt circle: Ø 132 mm Guodpfxsctla Ie Aqgeh -Weight: 45 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2001, machine/vehicle number: EM196 - IS4095, Steel crane, overhead crane, gantry crane, indoor crane Load capacity / lifting capacity: 5t - 5000KG Track gauge: 11,390mm, overall dimensions approx. 11,550mm TYPE EL-C 50 11,390 E Year of manufacture: 2001 Lifting height: 6m Overall height from top of crane to hook: approx. 900mm Head beam length with buffer: approx. 2290mm With floor-mounted control Crane is dismantled and immediately available Very good condition, see pictures Column-mounted slewing cranes and wall-mounted slewing cranes are also available. Gujdpszv H Anofx Aqgoh Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000, etc. Shipping via freight forwarder is possible, please inquire with your postal code. Collection preferred.