Used Stamping Press With Decoiling Line for sale (22,090)

Condition: excellent (used), Year of construction: 2015, operating hours: 5,100 h, Power: 4,000 kN Bolster area: 3,000 x 1,400 mm (W x D) Clamping surface table: 2.950 x 1.500mm Clamping surface ram: 2,950 x 1,240 mm Daylight: 600 mm (stroke down and adjustment on top) Hfjdpfx Acspvlf So Noh Frequency: 5 - 100 rpm, infinitely variable Stroke: 20 - 200 mm, automatically adjustable Ram adjustment: 150 mm (motorized) Design: - With servo technology, speed of ram adjustable, possible to pendle - Table - clamping plates divided and manually adjustable - 8-fold sliding guide - motorized oil - central lubrication - automatic ram adjustment - pneumatic ram weight compensation - electromotive stroke adjustment - control Siemens + Fanuc - visualization Siemens Panel PC in mobile desk - tool safety device 8-fold - tool data memory - 2-channel press force measurement - Hydraulic overload protection - T-slots in table and ram - Longitudinal groove for tool centering in ram - Anti vibration machine feet - opening in the table Equipped with a complete decoiling line make Lorenz Decoiler Load capacity: 80kN strip width: 20 - 820 mm Inner diameter: 470 - 520 mm Coil - outer diameter 1.800 mm Straightening machine strip width: max. 820 mm Strip thickness: 0,5 - 4,0 mm Straightenable cross section: 1.600mm² Number of rolls: 9 pcs, Ø 65 mm + 2 pcs feeding rolls Speed: 0 - 30 m/min Electronic roll feed Strip width: max. 820 mm Strip thickness: 0.5 - max. 6.0 mm Cross section: max. 2.400 mm² Number of rollers: 2 pcs. Ø 120 mm

Condition: good (used), Year of construction: 1984, Power: 800 kN Frequency: 30 - 200 rpm, adjustable by PIV gearing Stroke, adjustable: 20 - 100 mm Daylight: 500mm (max. stroke up) Ram adjustement: 75mm Size of bolster: 1.010 x 800mm Opening in bolster: 700 x 150mm Ram area: 860 x 700mm Motor power: 22 kW equipped by: - 8pc. guideways - hydraulic overload - motorized oil lubrication - motorized ram adjustment - electro pneumatic stroke adjustment with complete decoiling line make ALBA, consisting of: Decoiler Outer diameter max. 1.400mm Hsdpfxodhzf Ie Ac Nofh equipped by: • Decoiler moveable hydraulic • hydraulic coil loading device • hydraulic drive • hydraulic expansion 480 - 530mm • hydraulic pressure arm, lateral adjustable by handwheel • lateral arms Straightener Type: Ma Ria 9 Width: max. 400mm Thickness: 0,5 - 5,0mm Number of pulling rolls: 2 pc., Ø 120mm, upper can be lifted by hydraulic Number of straightening rolls: 9 pc., Ø 60mm, upper rollls adjustable by hydraulic drive, all rolls supported equipped by: • hydraulic strip insertion device • lateral strip guidings at entrance • lateral strip guidings at exit • basket at exit • loop control by sensor • lateral loop guiding Roll feeder Type: Vhy 400 Width: max. 400mm Thickness: max. 5,0mm passline adjustement by hydraulic jack We can offer even only press or decoiling line

Condition: good (used), Impress HM 4 Hot Stamping Press This machine is in very good condition and ready to use. This machine is from the popular Impress hot stamping machine manufacturer, manufactured in the UK. Description The Impress hot stamping press is a hot stamping and embossing press for paper and plastics. It’s a useful device in any advertising agency or digital printing house. The manual press is powered by only 230V. A powerful press with adjustable pressure ensures repeatability and very high pressure between the die and the material. The machine features a worktop with a slide-out function, adjustable embossing depth, a heating plate with a thermostat, and an automatic foil feed. Specifications: Heating temperature control via thermostat Hfedpozday Rofx Ac Nsh Heating plate pressure mechanism: mechanical Press force: 1000 kg Power consumption: 500 W Power supply: 230 V Machine weight: 50 kg Plate size: 150 x 150 mm.

Condition: good (used), HFS-210 Hot Stamping Press The machine is in perfect condition. Year of manufacture: 2019. Hsdszdau Uopfx Ac Nsfh Description: The HFS-210 Hot Stamping Press is a pneumatic hot stamping press for hot stamping, embossing paper, and plastics. A useful device in any advertising agency or digital printing house. The cycle is operated manually. The pneumatic drive ensures repeatable work and very high die pressure on the material. The machine is equipped with an automatic foil feed, which significantly shortens the time of a single hot stamping cycle, a worktop, adjustable embossing depth, a hot plate ground to 0.01 mm accuracy, which significantly improves the quality of embossing with large dies, a control panel, and modern OMRON controls. Specifications: MODEL: HFS-210 Hot Stamping Press Heating plate size: 210 x 150 mm Work table area: 500 x 350 mm Heating temperature control: via display up to 200°C Holding foil adjustment: Automatic, potentiometer-controlled Hot plate pressure mechanism: pneumatic Height of the gilding stack: 68 mm Press force: 0.6 T Power consumption: 900 W Power supply: 230 V Machine dimensions: 750 mm (W) x 530 mm (D) x 1670 mm (H) Machine weight: 120 kg The machine includes a cross table and a die mounting frame. An instruction manual is included.

Condition: good (used), Screw bookbinding press 40×30 with base The machine is fully operational and ready for operation. Hfedpfx Ajzdat Roc Nsh Format: 400×300 mm Pressure: 3 tons Made in Germany.

Condition: good (used), Bookbinding press with tapping block Hodpfxjzdatqj Ac Nefh The machine is fully operational and ready for use. Approximate format: 480 x 330 mm 3-ton pressure

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: 9825, The 2024 general overhaul includes, among other things, the die head, hydraulic nut, bearings, main shaft, oil pump with filter, and synthetic oil. Only the steel housing is older but is in excellent condition. The images of the production line in the hall date from before the overhaul. The individual images of the Amandus Kahl pellet press show the condition after the overhaul. TECHNICAL DETAILS Motor power: 110 kW Sawdust capacity: 2.5 – 3 t/h Biomass capacity: 3 t/h Bran capacity: 3.5 – 4 t/h Straw capacity: 2 – 2.5 t/h L/D ratio: 3.67:1 MACHINE DETAILS Hfjdpezaricefx Ac Njh Dimensions of press (W x H): 1,450 x 1,900 mm Diameter of press: 2750 mm Insertion depth: 6 mm Press length: 22 mm Year of manufacture of motor: 2024 Year of manufacture of cooler with sieve: 2015 Year of manufacture of conveyor belt: 2015 Year of manufacture of feed screw: 2015 EQUIPMENT Amandus Kahl C35-780 pellet press with base plate New 110 kW electric motor Electric control cabinet with emergency stop Complete electrical documentation Conveyor belt Sieve system with automatic cooling Hydraulic nut Die head Electrical wiring Metering screw for product feed Automatic metering system for filling 4 additional dies, 6 mm 60 liters of additional synthetic oil 7 new bearings 2 new wear rings 1 new air filter 2 new oil seals 1 new oil filter 1 new oil pump 20 liters of 800/460 synthetic oil 1 new thrust piece (main shaft) Documentation of overhauled and renewed parts

Condition: good (used), Baier Geba 1/P Hot Stamping Press The machine is in perfect condition and ready to use. This machine is from the popular hot stamping manufacturer Gebrüder Baier KG, manufactured in Germany. A stand is included. Description The Baier Geba 1/P hot stamping press is an automatic press for hot stamping, embossing, and die-cutting paper and plastics. It’s a useful device in any advertising agency or printing house. The automatic presser starts and operates on a 230V power supply with compressed air. A powerful presser with adjustable pressure ensures repeatability and very high pressure of the die against the material. The machine features a worktop with a slide-out function, adjustable embossing depth, and a heating plate with a thermostat. Specifications: Heating temperature control Heating plate pressure mechanism: automatic Press force: 8 kN Hfedpfxjzdauns Ac Njh Power consumption: 320 W Plate size: 110 x 70 mm Power supply: 230 V Machine weight: 150 kg

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, pressing force: 200 t, stroke length: 400 mm, table width: 1,600 mm, table length: 1,400 mm, working height: 730 mm, Equipment: safety light barrier, Müller Weingarten press line: KE 200-16/14.3.1 - 200 tons KE 300-16/14.2.1 - 300 tons KE 200-16/14.4.1 - 200 tons KE 200-16/14.5.1 - 200 tons The presses have a common housing and fan system. The remaining elements are independent, which will allow you to work on the presses individually. Also, each press is controlled individually Press in very good technical condition for sale from a liquidated press in Poland Modernized in 2018-2023. New Simatic S7 control system and new electrical cabinet. Optical barriers installed. Possibility to check the machine in operation - The press is still connected to the power supply. Müller Weingarten press line KE 200-16/14.3.1 - 200 tons KE 300-16/14.2.1 - 300 tons KE 200-16/14.4.1 - 200 tons KE 200-16/14.5.1 - 200 tons Hjdpfx Acev Hqnaj Nsfh The presses have a common covers and fan system. The rest of elements are independent, which allows for individual work on the presses. Also, the control of each press is individual A presses in very good technical condition for sale from a liquidated stamping shop in Poland Modernizes during 2018 -2023 New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Possibility to check the machine in operation - The press is still connected to the power supply.

Condition: excellent (used), machine/vehicle number: 46131, Stamping surface with heating head: HKAC max. 100 x 125 mm // HKBC max. 140 x 230 mm Stamping pressure at 6,5 bar with: 1 Zylinder ca 400 daN (kp) // 2 Zylinder ca 800 daN (kp) Readjustable stroke, dep. on pressure producer: 0-40 mm / 0-100 mm Max. passage height without/with sliding table: 300 mm / 275 mm Readjustable foil advance: 0-230 mm Max. foil width: 140 mm Heating voltage: 220 V / 50 Hz Heating capacity with heating head: HKAC 540 W // HKBC 900 W Temperature measurement by means of: Fe-Ko Hedpjx I Nfrjfx Ac Nsfh Max. output, hourly cycles: ca 4000

Year of construction: 2000, condition: used, 400 TON HYDROMEC HF4000 NON-FERROUS HOT FORGING PRESS LINE MANUFACTURER - HYDROMEC YEAR - 2000 SERIAL NUMBER - 660 MODEL - HF4000 C/D MATERIAL - NON-FERROUS TONNAGE - 400 TON (4000 KN) STROKE - 380MM STROKE PER MINUTE (CONTINUOUS) - 22-35 STROKE PER MINUTE (SINGLE STROKE) - 22-45 RAM ADJUSTMENT RANGE - 100MM Hfsdpfx Acszad Nhj Nsh CLEARANCE (STROKE TO BOTTOM, ADJUSTMENT TO TOP) - 865MM SIZE OF TOOL MOUNTING PLATE - 1000MM X 1000MM MAIN PRESS MOTOR - 59 KW MAIN MOTOR RAM ADJUSTMENT - 2.2 KW CUSHION FORCE - 70 TON (700 KN) CUSHION STROKE - 40 - 110MM INCLUDES: AUTOMATED PICK AND PLACE ROBOT FULLY AUTOMATED SLUG LOADING STATION WITH FURNACE/CONVEYANCE MAESTRI C.T. 3500 4 TRACKS SLUG FURNACE (NEW 2000) , 420 KW POWER. NATURAL GAS, 950 DEGREES CELCIUS ELECTRICS PRESS CONTROLS

Condition: used, Year of construction: 2009, 1250 MT PRESEZZI BRASS ROD OIL HYDRAULIC EXTRUSION PRESS LINE W/ OCN HANDLING MANUFACTURER - PRESEZZI YEAR - 2009 SERIAL NUMBER - 2671-2009 PRESS TONNAGE - 1250 MT WORKING PRESSURE - 260 BAR BILLET DIAMETER - 145MM BILLET LENGTH MAX - 650MM MAIN CYLINDER (SINGLE ACTING) WORKING PRESSURE - 260 BAR RAM DIAMETER - 760MM POWER - 1149 MT SIDE CYLINDERS (DOUBLE ACTING) OPERATING PRESSURE - 260 BAR BORE - 160MM ROD DIAMETER - 100MM THRUST FORCE DURING EXTRUSION - 107 TON THRUST FORCE DURING RETURN - 65 TON TOTAL MAIN CYLINDER AND SIDE CYLINDER TRUST FORCE - 1256 TON CONTAINER MOVEMENT (DOUBLE ACTING) OEPRATING PRESSURE - 260 BAR BORE - 160MM ROD DIAMETER - 100MM SEALING FORCE AT 300 BAR - 107 TON OPENING FORCE AT 280 BAR - 65 TON SHEAR CYLINDER (DOUBLE ACTING) OPERATING PRESSURE - 260 BAR BORE - 100MM ROD DIAMETER - 70MM SHEARING FORCE - 20 TON ASCENDING FORCE - 10 TON HIGH PRESSURE REXROTH PUMP GROUP: MAIN PUMPS NUMBER OF PUMPS - 3 MANUFACTURED - BOSCH REXROTH PUMP TYPE - A3VSO0500HSE/30R-PPH13N00 OPERATING PRESSURE - 260 BAR FLOW RATE - 500 CM3/ROTATION PER PUMP ROTATION SPEED - 1000 RPM PER PUMP POWER - 200 KW PER PUMP AUXILLARY PUMPS NUMBER OF PUMPS - 1 MANUFACTURED - BOSCH REXROTH PUMP TYPE - A10VSO140DFR/31R-PPB-12NOO OPERATING PRESSURE - 160 BAR FLOW RATE - 140 CM3/ROTATION PER PUMP ROTATION SPEED - 1500 RPM PER PUMP POWER - 55 KW PER PUMP PILOT PUMP NUMBER OF PUMPS - 1 MANUFACTURED - BOSCH REXROTH PUMP TYPE - A10VSO45 DFR/31-PPA12NOO OPERATING PRESSURE - 160 BAR FLOW RATE - 45 CM3/ROTATION PER PUMP ROTATION SPEED - 1500 RPM PER PUMP Hfjdpfxjzad Evj Ac Noh POWER - 18.5 KW PER PUMP CONTAINER PUMP NUMBER OF PUMPS - 1 MANUFACTURED - BOSCH REXROTH PUMP TYPE - A11VO40DR/10R-NPC12NOO OPERATING PRESSURE - 300 BAR FLOW RATE - 40 CM3/ROTATION PER PUMP ROTATION SPEED - 1000 RPM PER PUMP POWER - 15 KW PER PUMP MAIN PRESS LINE COMPONENTS / FEATURES COIM AUTOMATED BILLET FURNACE WITH INFEED TABLE BILLET LOADING STATION QUICK CHANGE DIE CHANGEOVER TABLE OCN SINGLE PULLER OCN WALKING BEAM COOLING TABLE OCN ENTRY FINISH SAW FEED TABLE OCN FINISH SAW OCN EXIT BUNDLING TABLE PRESEZZI OPERATORS DESK (LEFT HAND DIRECTION)

Condition: reconditioned (used), Year of construction: 2000, functionality: fully functional, This SCHAAL SEP 80 (Machine No. 00-1564, built 2000 at A. Schaal GmbH & Co., Salach/Württemberg, Germany) is a precision eccentric press engineered for demanding high-volume stamping work. Built around a vibration-damped O-form double-column cast frame, it delivers the rigidity and dimensional stability required for fine-blanking, progressive die stamping, and high-tolerance production runs where part quality cannot drift across the shift. This press comes equipped with the matched SCHAAL SWV 3E roll feeder, so it's ready to run as a complete coil-fed stamping line out of the gate: Feed length: 0–9,999.9 mm (fully programmable) Strip width: up to 320 mm Strip thickness: 0–4 mm. Manufacturer A. Schaal GmbH & Co. Werkzeug- u. Maschinenbau Type SEP 80 Year of manufacture 2000 Machine number 00-1564 CE marking Yes Press force 800 kN Hfsdozab Ibopfx Ac Njh Adjustable stroke 8–80 mm Distance table-to-ram (max, ram down, with bolster) 310 / 355 mm Ram adjustment 80 mm Ram dimensions 500 × 400 mm Ram bore Ø 50 × 90 mm Ram keyway 30 H7 mm Table size 830 × 700 mm Bolster plate thickness 80 mm Through-hole in table 500 × 200 mm Strip pass line over table (with bolster) 120 mm ± 40 mm Total installed power 26 kW Supply voltage 3 × 400 V, 50 Hz Rated current 40 A Pre-fuse 50 A Weight 8,000 kg Feeder SCHAAL SWV 3E roll feeder Feed length: 0–9,999.9 mm (fully programmable) Strip width: up to 320 mm Strip thickness: 0–4 mm

Condition: used, Single-column eccentric press RICHTER type PEKRS 80 Year of construction 1970 - overhaul 2024 Compressive force 80 ton. throat depth 350 mm Table size 900 x 650 mm Hole in the clamping table Ø 200 mm ram surface 700 x 500 mm Stroke rate 70 strokes/min. Stroke adjustment 6 - 100 mm ram adjustment 85 mm Installation height max. 400 Clamping pin bore Ø 50 mm Table height above floor 810 mm Motor power 8 kW Mains connection 400 Volt, 50 Hz - ORTLINGHAUS pneumatic clutch/brake combination - HERION XSz 32 press safety valve - Pneumatic ram compensation cylinder - Overload protection with breaker plate in ram - Central grease lubrication with hand pump Space requirement L x W x H 1800 x 1250 x 2830 mm Weight 5.7 tons Very good condition Technically overhauled and converted to the latest UVV with new electrics Control conversion in 05/2024 - suitable for manual insertion work - in accordance with DGUV Information 209-030 Press inspection and Machinery Directive 2006/42/EC Low Voltage Directive 2014/35/EU EN ISO 16092-1: Safety of machine tools - Presses - Part 1: General safety requirements EN ISO 16092-2: Machine tools - Safety of presses - Part 2: Mechanical presses - Control system with plain text error messages and diagnostic screen for rapid fault localization - New electrical cabinet, mounted on the side of the machine - completely based on SIEMENS, with PLC S7-1200 PROFIsafe and 7" TFT touch display - Two-hand control panel with emergency stop and engagement lock - el. foot switch - Cam switch unit with run monitor control - Stroke release via HERION XSz 32 press safety valve with pneumatic pressure compensator - New wiring of the machine - Updated operating instructions The machine is equipped with 6 operating modes: 1 = Set-up 2 = Single stroke two-handed 3 = Single stroke foot 4 = continuous run foot 5 = automatic continuous run 6 = reverse run Hjdpoi Db Ibefx Ac Nsfh

Condition: used, Strip Processing Line - Decoiler and Straightening Machine Year of manufacture: 1991 Strip width: 50 to 450 mm Sheet thickness with straightener inactive: 6 mm Sheet thickness with straightener active: 2 mm - Excellent equipment and feed-in aids Required floor space for the complete line (L x W): approx. 7000 x 3000 mm Total weight of the system: approx. 11 tons Good condition Straightening Machine HMS Type RS 47-04/1, Machine No. Strip width, nominal: 400 mm Strip width, max. pass-through: max. 455 mm Strip thickness at 400 mm width: max. 1.5 mm (steel) Strip thickness at 400 mm width: max. 2 mm (copper) Speed: max. 40 m/min Number of straightening rollers: 7 pcs Straightening roller diameter: Ø 40 mm Number of pinch rollers: 2 pcs Pinch roller diameter: Ø 80 mm Entry height, pass height: 1500 mm - Straightening rollers hardened, ground, and hard-chromed, with central support - Pinch rollers hardened, ground, and hard-chromed, with hydraulic disengagement - Manual straightening roller gap adjust - Feed-in aid with hydraulically extendable tongue and hydraulically adjustable deflection roller - Adjustable side strip guide - All straightening rollers driven via distribution gearbox with cardan shafts - Both pinch rollers driven via gearbox with cardan shafts - Frequency-controlled drive via geared motors - Straightening machine opening stroke 250 mm for cleaning or processing thicker material, stroke movement via trapezoidal thread spindle - Ultrasonic loop control Transport dimensions (L x W x H): 3600 x 2200 x 2200 mm Nett weight: approx. 4 tons Hfodpfxoif Sg Ss Ac Nsh Decoiler HMS Type BA 1.5-06/80, Machine No. Coil weight: max. 8000 kg Coil outside diameter: max. 1600 mm (with coil car) Coil outside diameter: max. 2000 mm (without coil car) Coil turntable diameter: Ø 1700 mm Coil inside diameter, expanding range: 460-520 mm Coil width, nominal: max. 630 mm Spreader jaw width: 750 mm Height of the decoiler drum above base plate: 1500 mm - Decoiler drum driven by hydraulic motor and gear - Pneumatic run-on brake on decoiler drum, TWINFLEX - Hydraulic expansion of the decoiler drum, centrally via wedge slider system - Hydraulic hold-down arm with hydraulically driven double pendulum roller - Coil car with 12 tons lifting force and 300 mm stroke - Decoiler frame above floor with motorized cross travel drive Transport dimensions (L x W x H): 3500 x 1900 x 2500 mm Nett weight: approx. 5 tons Central hydraulic unit, adjacent Tank capacity: 350 liters Motor power: 18.5 kW - Drive motor with 2 REXROTH pumps (tandem pump) - Oil cooler as air heat exchanger with fan motor Transport dimensions (L x W x H): 1600 x 850 x 1450 mm Nett weight: approx. 800 kg Electrical cabinet, adjacent - All cable connections via Harting connectors Transport dimensions (L x W x H): 2800 x 500 x 2250 mm Nett weight: approx. 800 kg

Condition: used, Year of construction: 1990, operating hours: 83,000 h, functionality: fully functional, Complete precision stamping line ready for relocation. Centre piece is a BRUDERER BSTA 50HL (500 kN, year 1990, Kom. 9443) equipped with control and Unidor tool and press safety monitoring system. The line includes a sound-insulating safety cabin, finished-parts output conveyor, Soprem H1000/1000ZV/10M/LK.LF/N1/G coiling machine (2003), and Soprem BR19/160/12/U Straightening machine (2003). Available as a complete turnkey lot. Technical Specifications Press Manufacturer BRUDERER AG, Frasnacht, Switzerland Hodsy S E U Rspfx Ac Nefh Machine Model: BSTA 50 HL Serial / Commission No.: Kom. 9443 Year of Manufacture: 1990 Operating Hours: 82,600.0 h (as shown on press control) Total Weight approx.: 8,700 kg Sound Enclosure / Cabin Included: W 3,460 × L 2,331 × H 3,910 mm Stroke range (adjustable): 16 / 19 / 25 / 32 / 38 / 44 / 51 mm Ram adjustment range: 64 mm Tool opening width (max.): 950 mm Bolster plate — Width × Depth: 930 × 650 mm Baseplate opening W × D: 900 × 200 mm Strip feed height (adjustable): 60 – 140 mm Max. strip pass-through width: 250 mm Feeding device: BBV 195 - 85 Feeding angle: 90 degrees Max. Strip thickness: 4 mm Max. Strip width: 160 mm Feed length: 0 – 85 mm Supply voltage: 3 × 400 V / 50 Hz Main motor power: 28 kW Control voltage (DC): 24 V DC Pneumatic supply: 6 – 10 bar (R ½" connection) Press width (with feeder) approx. 2,471 mm Press depth approx. 1,302 mm Press height approx. 3,165 mm Including Soprem H1000/1000ZV/10M/LK.LF/N1/G coiling machine (2003) Including Soprem BR19/160/12/U Straightening machine (2003) Includign Unidor press and Tool Safety System Finished-parts output conveyor belt Sound-insulating safety cabin / enclosure Original technical documentation and schematics

Condition: good (used), CMC Italia Q Finish Crater 20 Book Press Book press with groove cutter and heated platens. Manufactured by CMC, Italy. Technical specifications: Hjdpfsy Tu Txsx Ac Nofh Maximum format: 420 x 500 x 80 mm Weight: 420 kg Pressure: 5000 kg Built-in hydraulic unit. Automatic book feed. Automatic format detection. 380V power supply + compressed air.

Condition: good (used), functionality: fully functional, Lisec IG-line for double and triple glass units up to 2500 x 1600 mm, year 1993 - 1999, consisting of: RTV-38/16WE, washing machine inlet conveyor, 1993 VHW-16V8, glass washing machine with 8 brushes for low-e, 2 hot water tanks, 2 sand filters, and blower, 1993 RTVB-16/16ST, washing machine outlet conveyor, 1997 Sofsolution LineScanner RTVB-11/16 ST, inlet conveyor frame set, 1997 RSVB-27/16, frame set section, 1997 RTVB-27/16MZ, measuring section for gas filling press, 1997 FPS-25/16U, gas filling press for Argon, 1997 RTVB-22/16ST, press outlet conveyor 1, 1997 RTVB-22/16ST, press outlet conveyor 2, 1997 RTVB-27/16ST, press outlet conveyor 3, 1997 RTVB-11/16, inlet conveyor for cork applicator, 1997 APK-3/16, automatic cork application device, 1997 Hodpfx Acer Iil Ee Nefh RTVB-11/16, outlet conveyor for cork applicator, 1997 RTVB-11/16VE, inlet conveyor sealing robot, 1999 VL-1N/16, automatic sealing machine for double and triple glass units, 1999 VLA-25, VL-extension with corner correction rollers, 1999 DOS-1/PU, mix and metering station for PU, including nozzle purching device,1999

Condition: like new (used), Year of construction: 2022, operating hours: 91 h, functionality: fully functional, number of ink cartridges: 4, color channels: CMYK, resolution (max.): 2,400 dpi, paper weight (min.): 52 g/m², paper weight (max.): 400 g/m², paper width (min.): 100 mm, paper width (max.): 330 mm, paper height (min.): 148 mm, paper height (max.): 660 mm, number of feeding trays: 5, total length: 4,642 mm, total width: 831 mm, total height: 1,212 mm, space requirement length: 6,500 mm, space requirement width: 2,500 mm, space requirement height: 2,000 mm, counter reading (black): 1,411, counter reading (color): 84,400, year of last overhaul: 2026, type of input current: AC, input current: 16 A, input voltage: 230 V, Equipment: auto duplex, brochure finisher, raster image processor, Xerox Versant 280 Press – Full Bleed Trimming, only 85,811 clicks For sale: a well-maintained Xerox Versant 280 Press with a complete full-bleed booklet line from a commercial environment with low usage (only 85,811 clicks total). The machine is fully production-ready (last check: April 23, 2026). Price (excluding VAT, negotiable): CHF 20,000 / EUR 22,000 – EXW Canton of Zurich __ EUR amount is indicative based on the daily exchange rate. Delivery and installation can be arranged upon request via a specialized carrier. Hfodpfx Acsy Nfqge Nsh Machine: Xerox Versant 280 Press - Year of manufacture: 2022, first use: September 2022 - Printing speed: up to 80 pages/minute (52–220 g/m²) - Automatic duplex printing up to 350 g/m² - Resolution: 2400 × 2400 dpi (Ultra-HD) - Paper range: 52–400 g/m², format up to 330 × 488 mm Equipment: - Xerox Print Server v2.1 (external Fiery 2.1, including workstation with license) - Large-capacity tray for oversized formats OHCF (A-CF03, 2,000 sheets) - Production Ready Booklet Maker Finisher (A-FN13) - SquareFold Trimmer (back scoring, front trimming) - Two-sided trimmer with scoring function (drop-leaf brochures) - Interface module with smoothing station Condition and maintenance: - Only 85,811 clicks total (84,400 color, 1,411 black and white) - Approximately 6–8% of the typical service life used - Actual printing time according to the meter report: 91 hours - 4 new drum units included in the delivery (current drums have 15% remaining life; new ones have already been procured and will be delivered upon handover) ### Last service check on April 23, 2026 Service contract (Switzerland); transfer to the buyer after consultation __ Upgrade potential: The Versant 280 is CMYK+ capable – retrofitting with a Xerox Vivid Kit (gold, silver, white, transparent) or a fluorescent kit is possible via Xerox. Inspection: Inspection and test printing are possible in the Canton of Zurich by appointment. Please send inquiries via email, and we will call you back.

Condition: used, Hydraulic press line for deep drawing and forming processes, featuring multiple presses and automated parts handling. Manufacturer: Fritz Müller / Schuler Machine type: Hydraulic press line / transfer press Number of presses: 6 Press 1 Type: BZE 1200 – 35.1.1 Year of manufacture: 1972 Press force: 12,000 kN Press 2 Type: ZE 800 – 35.1.1 Year of manufacture: 1969 Press force: 8,000 kN Press 3 Type: ZE 800 – 35.1.1 Year of manufacture: 1969 Press force: 8,000 kN Press 4 Type: ZE 800 – 35.1.1 Year of manufacture: 1969 Press force: 8,000 kN Press 5 Type: ZE 800 – 35.1.1 Year of manufacture: 1969 Press force: 8,000 kN Press 6 Type: ZE 800 – 40.3.1 Year of manufacture: 1993 Press force: 8,000 kN Max. workpiece size: 3,500 x 2,200 mm Max. tool weight: 32,000 kg Material thickness: 0.5 – 2.5 mm Hfedpfx Asy Ndz Rec Nsh Max. drawing depth: 430 mm Documentation: No digital data available Drawings: Partially available as ink drawings, can be viewed onsite Packing lists: No packing lists with individual weights available Type plates: Not fully available, exact model designations only partially present Location: Radeberg

Condition: used, Year of construction: 1988, strip width (20) 44 - 320 mm strip thickness 0,66 – 4 mm strip cross section max. 930 mm² reference material (tensile strength) St42-2 (500 N/mm²) yield stress max. 280 N/mm² coil weight max. 4 t coil-dia max. 1.500 mm Hfedpfolil Ewox Ac Nsh

Year of construction: 1988, condition: used, strip width (20) 44 - 320 mm strip thickness 0,66 – 4 mm strip cross section max. 930 mm² reference material (tensile strength) St42-2 (500 N/mm²) yield stress max. 280 N/mm² coil weight max. 4 t coil-dia max. 1.500 mm Hsdpfx Acsbicz Hs Nsfh

Condition: repair required (used), Sheet Metal Processing Unit, Decoiler, Straightener, Guillotine Shear, Reinhardt Maschinenbau GmbH Ras 228.60 Used Machine Manufacturer: Reinhardt Maschinenbau GmbH Model: Ras 28.60 Maximum Sheet Width: 1500 mm Maximum Sheet Thickness: 1.5 mm Total Weight: 9350 kg Features: Decoiler Measuring Unit Hodsvkbrqjpfx Ac Nsfh Sheet Straightener Guillotine Shear Electrical Data: Voltage: 400 V Power: 12 kW Frequency: 50 Hz Current: 35 A Note: The control panel display is not functioning.

Condition: used, Single-column eccentric press WEINGARTEN type E 40 Machine. No. 643/62 Year of construction 1963 Pressure capacity 40 ton. throat depth 250 mm Table opening 150 x 80 and Ø 200 mm Table surface 560 x 460 mm ram surface 250 x 200 mm Plunger stroke adjustable 8-88 mm Plunger adjustment 63 mm Installation height 320 mm Clamping pin bore Ø 40 mm Stroke rate 100/130 strokes / min. Motor power 2.2 / 3 kW Mains connection 400 Volt, 50 Hz Table height above floor 840 mm - Clutch/brake combination with WEINGARTEN friction threaded clutch with TDC run-through protection - Electric lift release via two-hand control - Overload protection by breaker plate - Manual central grease lubrication - Front crankshaft support bearing - Control cabinet adjacent Hfodpfjtx E Rqsx Ac Noh - UVV for manual insertion work Space requirement L x W x H 1800 x 1500 x 2200 mm Weight 3.1 tons

Condition: good (used), Code: 0377 Brand: COLOMBO R Model: PCA.S Automatic continuous-cycle hot-pressing line for the production of panels, furniture, doors, paneling, sandwich panels, and various Sturdy supporting structure Composition: 4-roll gluing machine OMMA- Width 1400 mm Hfsdpfx Asy I Sncjc Njh Disc transfer conveyor Preparation table Press COLOMBO 5500 x 1400 mm - n° 8 pistons - diameter 150 Solid steel platen Top-down pressing Pressure 4 kg/cm² Automatic unloading with photocell devices Work surface height 800 mm Closing times are reduced to 1–2 seconds and opening times to 2–3 seconds Overall dimensions press mm 5960 x 1900 x 2320 h Complete line length 22 mt Installation of the line does not require any foundation