Used Statomat Braking Device for sale (28,716)

Condition: used, DC brake, braking device, electric motor brake Ibedpfjcarz Rox Acpoc -Manufacturer: AER Statomat -Type: B 54245020/v15 -Current: 150+100 amps -Operating voltage: 380 V AC -Number: 1x power supply available -Price: per piece -Dimensions: 160/215/H155 mm -Weight: 3.2 kg

Condition: used, DC brake, braking device, electric motor brake -Manufacturer: AER, Statomat braking device type B 122420 / V16 -Current: 50 A -Operating voltage: 380 V -Control voltage: 220V -Dimensions: 160/140 / H135 mm Ibsdpfsgypvdox Acpsc -Weight: 1.6 kg

Condition: used, DC brake, braking device, electric motor brake -Manufacturer: AER Statomat -Type: D 6225/V -Current: 200+50 amps -Operating voltage: 380 V AC -Number: 1x power supply available -Price: per piece -Dimensions: 160/215/H155 mm Ijdpfx Aced Dh A Ijpebc -Weight: 3.2 kg

Condition: used, DC brake, braking device, electric motor brake -Manufacturer: AER Statomat Iedsd Dh A Njpfx Acpjbc -Type: D 53245050 -Current: 150 70 amps -Operating voltage: 380 V AC -Number: 1x power supply available -Price: per piece -Dimensions: 160/215/H155 mm -Weight: 3.2 kg

Condition: excellent (used), DC brake, braking device, electric motor brake, brake module, brake unit, brake chopper -Manufacturer: HuK Hilger u. Kamp; Kern, Statomat brake device frenotron-se unused original packaging -Motor power: max. 3.5 kW -Technical data: see photo -Number: 2x power supply units available -Price: per piece -Dimensions: 100/70/H110 mm -Weight: 0.4 kg Ibsdoqrwxdopfx Acpec

Condition: used, Braking unit -Brake with clutch -Power: 0.15 kW -Resetting force: 30 kp Ibededc Iphepfx Acpsc -Stroke: 50 mm -Dimensions: 630/320/H460 mm -Weight: 56 kg

Condition: used, Rotating device Gunter Seibold rotating device for HTS coils – continuously variable drive (Type S05082) Description: Professional rotating device for holding and rotating HTS coils with winding cores. Developed for the uniform distribution of two-component resin during the curing process. Ideal for development, laboratory, or production environments with high-temperature superconductor coils. The winding form is electrically heated; the power supply is directly connected to the form (not included in the scope of delivery). The machine impresses with its precise control, ease of operation, and service-friendly design. Technical features Solid machine stand: Welded square tube construction with adjusting screws and floor anchors Drive: Three-phase planetary gearbox motor (11 kW, 400 V, 50 Hz, 3 phases) Continuously variable speed (0.2 – 100 min⁻¹) Soft start & soft stop via frequency inverter (4-quadrant controller) Electromagnetic spring force brake (safe stopping in case of power failure) Rotating direction can be switched left / right Control panel: 5.7" touch panel for setting speed, direction, ramps, time, or number of revolutions Emergency stop button, ergonomically integrated 2 programmable analog inputs Electrical system & control cabinet: Control integrated in the machine stand 400 V / 230 V power supply, 24 V DC control voltage Circuit breaker, RCD protection 30 mA Sockets: 8× 230 V / 16 A, 2× 400 V / 16 A CEE, 1× 400 V / 32 A CEE Control cabinet with air conditioning unit Complete grounding & static discharge of the main shaft Adjustable work area light (swivel and height adjustable) Feature / Value Max. coil diameter 1,500 mm Coil passage 1,700 mm Center height above floor 1,100 mm Max. load on turntable 500 kg Turntable Ø 600 mm, 4 T-slots (DIN 650) Speed range 0.2 – 100 min⁻¹ (continuously variable) Torque 775 – 539 Nm Operating voltage 400 V / 50 Hz Control voltage 24 V DC Connected power 11 kW Connected current 32 A Color scheme (according to RAL) Ibodpfszil R Rsx Acpec Base machine: Blue (RAL 5010) Moving parts: Yellow (RAL 1021) Control panel / control cabinet: Light gray (RAL 7035 / 5010) Weight: approx. 1800-2000 kg Condition: used Scope of delivery: (See picture) (Changes and errors in technical data and specifications are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: good (used), Year of construction: 2008, machine/vehicle number: B0508A0131, functionality: fully functional, TRU BEND 5230 – CNC Press Brake – 230 t – 4,260 mm – Year of Construction 2008 For sale is a TRUMPF TruBend 5230 CNC press brake from the year 2008. The machine has a pressing force of 230 tons, a bending length of 4,260 mm, and extensive equipment for precise and economical bending operations. Technical Data Feature | Description Ibsdjz S Nxcspfx Acpec Manufacturer | TRUMPF Model | TruBend 5230 Year of Construction | 2008 Machine Number | B 0508 A 0131 Pressing Force | 2,300 kN / 230 t Bending Length | 4,260 mm Installation Height | 615 mm CNC Control | TASC 6000 Axes | 6 axes New Price | approx. €225,000 Equipment and Accessories - CNC control TASC 6000 - 6-axis back gauge system - Standard safety devices - Cabinet air conditioning - Hydraulic upper tool clamping - CNC crowning - 2-arm bending aid (new price approx. €28,000) - TRUMPF BendGuard safety system - TRUMPF bending software TruTops Bend with TruTops CAD - Preparation for ACB (automatic angle measurement) - Optical setup and positioning aid - TRUMPF machine documentation Description The TRUMPF TruBend 5230 is a powerful CNC press brake for demanding bending operations in sheet metal processing. Thanks to the 6-axis back gauge control, the hydraulic upper tool clamping, and the CNC crowning, the machine offers high flexibility and precision. The integrated 2-arm bending aid supports the processing of large and heavy sheet metal parts. The machine is ideal for industrial sheet metal processing, steel construction, and contract manufacturing. For sale due to business closure.

Condition: like new (used), Year of construction: 2014, functionality: fully functional, stroke length: 200 mm, controller manufacturer: Amada, controller model: Amada AB-Pad, number of axes: 4, Equipment: documentation/manual, Model: Amada HFE M2 100t 3m, 4-axis press brake Year of manufacture: 2014 Available immediately Press force (kN): 1000 Beam length (mm): 3110 Frame gap (mm): 2705 Throat depth (mm): 420 Standard stroke (mm): 200 Standard open height (mm): 470 Beam width (mm): 60 Table height (mm): 960 Approach speed (mm/s): 1-100 Bending speed (mm/s): 1-10 Return speed (mm/s): 1-100 Number of controlled axes: 4 Length (mm): 4580 Depth (mm): 2450 Ibedpfx Aoynbfvscpec Height (mm): 2685 Weight (kg): 6900 Safety device: AKAS type, additional pair of back gauge fingers Support arm for hanging, height adjustable with 2 lateral stops Hanging element for support arm and table, suitable for HFE-M2 series

Condition: defective spare-parts repository (used), Year of construction: 1997, machine/vehicle number: 885258, Defective hydraulic CNC press brake Offer 25514 Technical data: - max. working length 3060 mm - distance between uprights 2690 mm - max. pressing force 1300 kN - max. distance table / ram 370 mm - upright overhang 410 mm - ram stroke 215 mm - stroke speeds - downward speed, no load max. 200 mm/sec - upward speed 135 mm/sec - downward pressing speed 1 to 11 mm/sec Ijdpfx Acjx Ew Dqspjbc - total drive power 18 kW - pneumatic connection 6 bar - space requirement approx. W 3800 x H 2400 x D 2400 mm - weight approx. 11500 kg - includes: - with 6-axis CNC control DELEM - two-hand control panel with foot switch - crowning device - controlled back gauge with height adjustment 5 - 860 mm - hydraulic upper and lower tool clamping - die table movement pneumatically assisted - Machine does not reference because 2 axes on the right side of the back gauge are not functioning; control module may be defective.

Condition: new, Year of construction: 2025, Clean air dust extractor RLA 160 For wood dust and shavings, designed for commercial use Article number: 5131620 Brand: Holzkraft Ibodpfx Ajcnw T Iscpjc For wood shavings and wood dust. Designed for commercial use. All clean air extraction systems in this series are dust-tested according to H3, with a residual dust content of less than 0.1 mg/m³. High extraction performance with a small footprint. Maximum performance in this class. Very quiet. Application area: Clean air extraction systems for wood shavings and wood dust. Designed for commercial use. For all woodworking machines with a corresponding extraction port diameter. Also suitable for multiple dust sources. High-quality, well-designed construction. Robust and compact housing made of galvanized sheet steel. Extraction port can be easily repositioned from left to right, allowing for flexible use. Large inspection openings. Large, mobile chip collection containers with clamping bracket and chip collection bag. System is fully assembled upon delivery, allowing for quick deployment. Mobile. Description of the filter: Ultra-compact with maximum filter area. Filter material made of polyester fleece, aluminum-coated, washable, and therefore with a long service life. Filter is standardly tested and approved in antistatic design according to category M-BIA. Filter resistance monitoring via differential pressure sensor, adjustable with warning light on the control panel. The fan is located downstream of the filter. Equipment details: With a novel locking device for secure container positioning. All systems in this series are dust-tested according to H3, with a residual dust content of less than 0.1 mg/m³. Scope of delivery: Metal fan impeller Inspection opening for cleaning the bypass filter Connection cable 5 m with CEE plug 5-pin and phase reverser 2 swivel casters and 2 fixed casters with parking brake Manual cleaning Model: RLA 160 Article No.: 5131620 Technical data: Intake port diameter: 160 mm Nominal air flow: 1448 m³/h Max. air flow: 2400 m³/h Negative pressure at Vnenn: 2247 Pa Filter area: 9.21 m² Filter material: Dust class M Residual dust content: H3 (< 0.1 mg/m³) Filter cleaning: Compressed air supply: Chip collection volume: 2 x 193 l Supply voltage: 400 V Supply frequency: 50 Hz Motor power: 2.2 kW Sound pressure level max.: 73 dB(A) Dimensions (length x width x height): 1681 x 830 x 1654 mm Weight: 254 kg Location: Available from stock in 54634 Bitburg.

Condition: used, functionality: fully functional, overall weight: 3,000 kg, operation weight: 3,000 kg, maximum load weight: 3,000 kg, empty load weight: 3,000 kg, loading space volume: 18 m³, loading space width: 2,000 mm, loading space length: 3,000 mm, loading space height: 3,000 mm, Year of construction: 2022, operating hours: 2,000 h, machine/vehicle number: K22092001, ## Complete Nitrogen Generation System – Generator + High-Pressure Booster + Chiller For sale: a complete industrial nitrogen generation and high-pressure supply system, designed for use with high-power fiber laser cutting machines. The system allows nitrogen to be generated on-site and supplied to the laser at the required high pressure, significantly reducing dependence on liquid nitrogen deliveries. ### Complete system includes: * Nitrogen generator * High-pressure nitrogen booster * Industrial chiller / cooling system * Control system * Filtration and necessary system components ### Technical specifications: Nitrogen generator * Nitrogen purity: up to [99.99%] * Nitrogen capacity: [30 Nm³/h] Ijdpfx Aszv T Abjcpobc * Outlet pressure: [8 bar] * Automatic operation High-pressure booster * Maximum nitrogen pressure: [200 bar] * Capacity: [25 Nm³/h] * Designed for continuous industrial operation * Suitable for fiber laser cutting applications Chiller * Cooling capacity: [XX kW] * Designed for cooling the nitrogen booster/system * Industrial continuous-duty design ### Application The system was used for supplying nitrogen to a high-power fiber laser cutting machine. Suitable for laser cutting of: * Stainless steel * Aluminum * Carbon steel and other materials where high-pressure nitrogen cutting is required The equipment is sold as a complete system. Condition: Used, fully functional Location: Lithuania Availability: Immediately available The system can be inspected and tested on site. More photos, videos, and detailed technical specifications are available upon request. Worldwide transport can be arranged.

Condition: ready for operation (used), Year of construction: 1962, machine/vehicle number: E 557, functionality: fully functional, pressing force: 40 t, stroke length: 125 mm, table width: 400 mm, table length: 1,000 mm, overall weight: 3,900 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Ijdjz Izdnspfx Acpsbc Press force Max. press force: 40 t Stroke: 125 mm Max. operating pressure: 15.7 MPa Installation height: 650 mm Stand extension: 400 mm Ram adjustment: 125 mm Work table Table length: 1,000 mm Table width: 400 mm MACHINE DETAILS Machine type: Hydraulic press brake Type: E 40-1000 Year of manufacture: 1962 Factory number: E 557 Total weight: 3,900 kg Condition: Used, fully functional

Condition: good (used), Year of construction: 2006, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, pressing force: 170 t, stroke length: 200 mm, table length: 3,100 mm, distance table to ram: 350 mm, clearance between the columns: 2,700 mm, total length: 4,500 mm, total width: 2,000 mm, total height: 2,850 mm, overall weight: 11,600 kg, Equipment: documentation/manual, safety light barrier, Amada HFP 170/3 CNC press brake | 2006 | AMNC-PC | Wila clamping system Machine specifications Manufacturer: Amada Model: HFP 170/3 Year of manufacture: 2006 Condition: used, in good working order Control system: Amada AMNC-PC Tool clamping system: Wila Ibjdpfxjz S Nuqo Acpsc Included: 1 set of tools Dimensions: approximately 4,500 × 2,000 × 2,850 mm Machine weight: approximately 11,500 kg Location: Waanrode, Belgium Description Amada HFP 170/3 CNC press brake from 2006, equipped with AMNC-PC control system and Wila tool clamping system. The machine is used but still in good working order. One set of tools is included in the sale. The machine is being sold due to the purchase of a larger press brake. Transportation can be arranged upon request. Can be loaded on October 21st in Waanrode, Belgium.

Condition: good (used), Year of construction: 2000, functionality: fully functional, operating hours: 29,075 h, power: 9 kW (12.24 HP), input voltage: 400 V, input current: 20 A, input frequency: 55 Hz, type of input current: three-phase, pressing force: 50 t, stroke length: 200 mm, overall weight: 4,700 kg, Equipment: CE marking, documentation/manual, safety light barrier, We are selling a 2-meter sheet metal bending machine. The machine was used exclusively for thin sheet metal processing in our production facility. Manufacturer: AMADA Model: HFE 50-20s Year of manufacture: 04/03/2000 Condition: good (used) Operating hours: 29,075.7 hours 500 KN Max. stroke: 200 Weight: 4700 Noise level: less than 75 dB Voltage: 400 V / 50 Hz Rated current: 19.9 A UVV inspection carried out according to schedule / maintenance always performed by Amada according to schedule! The machine can be inspected under power in DE-84051 Mettenbach by appointment. Ibsdpfx Aez R Rl Ascpec Sale only to commercial customers and with exclusion of any warranty! The buyer must disassemble and collect the machine.

Condition: as good as new (ex-display), Year of construction: 2025, For wood chips and wood dust. Designed for commercial use. All clean air extraction systems in this series are dust-tested according to H3, with a residual dust content of less than 0.1 mg/m³. High extraction performance with a small footprint. Maximum performance in this class. Very quiet. Application area: Clean air extraction systems for wood chips and wood dust. Designed for commercial use. For all woodworking machines with a corresponding extraction port diameter. Can also be used for multiple dust sources. High-quality, well-designed construction. Robust and compact housing made of galvanized sheet steel. Extraction port can be easily repositioned from left to right, allowing for flexible use. Large inspection openings. Large, mobile chip containers with clamping bracket and chip collection bag. The system is fully assembled upon delivery, allowing for quick deployment. Mobile. Filter description: Ultra-compact with maximum filter area. Filter material made of polyester fleece, aluminum-coated, washable, and therefore with a long service life. Filter is standard and tested and approved in antistatic design according to category M-BIA. Filter resistance monitoring via differential pressure sensor, adjustable with a warning light on the control panel. The fan is located downstream of the filter. Equipment details: With a new locking device for secure container positioning. All systems in this series are dust-tested according to H3, with a residual dust content of less than 0.1 mg/m³. Scope of supply: Metal fan impeller. Inspection opening for cleaning the bypass filter. Connection cable 5 m with CEE plug 5-pole and phase inverter. 2 swivel castors and 2 fixed castors with parking brake. Preparation for connection of machine detection for up to 8 machines and slide valve controls. Iedjcnw U Dspfx Acpobc Manual cleaning. Sound pressure attenuator available as an accessory. Model: RLA 125 M Article no.: 5131256 Technical data Extraction port diameter: 125 mm Motor power: 2.2 kW Mains voltage: 400 V Mains frequency: 50 Hz Nominal volume flow: 1095 m³/h Max. volume flow: Vacuum at Vnenn: Filter area: 5.31 m² Filter material: Dust class M Residual dust content: 0.1 mg/m³ Chip collection volume: 1 x 239 l Max. sound pressure level: 73 dB(A) Dimensions (L x W x H): 1100 x 830 x 1650 mm Height from the lower edge of the extraction port to the ground: 850 mm Weight: 194 kg Location: Arriving at warehouse 54634 Bitburg.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, power: 18.5 kW (25.15 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 175 t, stroke length: 265 mm, operating speed: 10 mm/s, reverse speed: 100 mm/s, table width: 104 mm, table length: 4,050 mm, table height: 900 mm, throat depth: 410 mm, distance table to ram: 530 mm, clearance between the columns: 3,600 mm, oil tank capacity: 250 l, total length: 6,450 mm, total width: 2,650 mm, total height: 2,750 mm, overall weight: 12,500 kg, number of support arms: 2, number of axes: 6, Equipment: CE marking, safety light barrier, 2013 Durma AD-S 40175 CNC Press Brake – 6 Axis – Cybelec ModEva 10S Control Used 2013 Durma AD-S 40175 CNC hydraulic press brake for sale in Ireland. 6-axis CNC press brake with Cybelec ModEva 10S graphic control, Y1, Y2, X, R, Z1 and Z2 axes, CNC motorised crowning, laser guards, tooling and rear safety doors. Manufacturer: Durma Model: AD-S 40175 Axes: 6 Isdpez Imc Nsfx Acpebc Year: 2013 Capacity: 4000mm x 175T Control: Cybelec ModEva 10S Control Includes: Large Selection of Top & Bottom Tooling Description 2013 Durma AD-S 40175 CNC Press Brake, a high-quality 6-axis CNC hydraulic press brake with 4050 mm bending length and 175 tonne bending force. This machine is ideal for precision sheet metal bending, fabrication workshops, engineering companies, subcontract metalwork and production environments requiring a robust, accurate and well-specified press brake. This Durma AD-S 40175 is fitted with a Cybelec ModEva 10S Graphic CNC Control, offering 3D graphical programming and automatic bend sequences. The machine has 6 CNC controlled axes: Y1, Y2, X, R, Z1 and Z2, giving excellent flexibility for accurate bending and efficient backgauge positioning. The machine is in very good condition and comes complete with a large selection of Euro-style top and bottom press brake tools, laser guards, foot pedal, CNC controlled motorised crowning, quick-release top tool clamps and rear safety doors. Key Features Bending length: 4050 mm Bending force: 175 tonnes Axis configuration: 6 Axis CNC controlled axes: Y1, Y2, X, R, Z1 and Z2 Control: Cybelec ModEva 10S Graphic CNC Control Condition: Very good condition Crowning: CNC controlled motorised crowning Tooling: Complete with Euro-style top and bottom tools Safety: Laser guards and rear safety doors Clamping: Quick-release top tool clamps Includes: Foot pedal Suitable for: Sheet metal fabrication, precision bending, general engineering, subcontract fabrication and production bending Technical Specifications Model: AD-S 40175 Bending force: 175 tonnes Bending length: 4050 mm Distance between columns: 3600 mm Y-axis rapid speed: 120 mm/s Y-axis working speed: 10 mm/s Y-axis return speed: 100 mm/s Crowning: Motorised Daylight: 530 mm Table width: 104 mm Table height: 900 mm Stroke: 265 mm Throat depth: 410 mm Support arms: 2 Backgauge finger blocks: 2 X-axis travel speed: 500 mm/s X-axis travel: 650 mm R-axis travel speed: 350 mm/s R-axis travel: 250 mm Motor power: 18.5 kW Oil tank capacity: 250 litres Machine dimensions: 6450x2650x2750 mm Machine weight: 12,500 kg Cybelec ModEva 10S Graphic CNC Control The machine is fitted with a Cybelec ModEva 10S Graphic CNC Control, a user-friendly press brake control designed for graphical programming and efficient bending setup. Control features include: 3D graphical control interface 10.4” colour TFT screen 128 MB RAM 128 DM main memory Easy Cursor operation Automatic bend sequence calculation Single-page part programming capability CAD/CAM sequence viewing support Included Equipment This used Durma AD-S 40175 press brake is supplied with: 6 CNC controlled axes: Y1, Y2, X, R, Z1 and Z2 Cybelec ModEva 10S Graphic CNC Control Large Selection of Euro-style top & bottom tooling CNC controlled motorised crowning Laser safety guards Foot pedal Quick-release top tool clamps Rear safety doors Front support arms Backgauge finger blocks

Condition: excellent (used), For sale: SEW-EURODRIVE WA20/T DT71D6/BMG/TH geared motor with a built-in 24 V DC electromagnetic brake. The unit is fully functional, tested, and ready for use. The technical condition is very good. The housing has normal signs of use in the form of minor scratches and abrasions, which do not affect the operation of the device. Technical data: Manufacturer: SEW-EURODRIVE Gearbox model: WA20/T Motor type: DT71D6/BMG/TH Power: 0.25 kW Supply: 3×230/400 V Δ/Y Frequency: 50 Hz Rated current: 1.48 / 0.85 A Motor speed: 880 rpm Output speed: 45 rpm Ibodpfx Asz Snpqecpjc Torque: 37 Nm Gear ratio: i = 19.50 Protection class: IP54 Insulation class: F Brake: 24 V DC Braking torque: 5 Nm Weight: 11.66 kg

Condition: good (used), Year of construction: 1992, functionality: fully functional, operating hours: 8,600 h, input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, pressing force: 80 t, overall weight: 5,200 kg, Amada Promecam Press Brake 80-25 CNC Press Brake, 80 tons, 2500mm bending length. In perfect working order, easy to operate. Robust machine. Only 8600 operating hours. Can be inspected and tested before purchase. Ibodpfxoz Rqxhs Acpsc German operating manual included.

Condition: defective spare-parts repository (used), Year of construction: 2009, For sale is a defective Trumpf 7036 tube bending machine, manufactured in 2009. The screen remains blue (blue screen error). Ibedpfoz Rknpox Acpjc

Condition: like new (used), Year of construction: 2022, machine/vehicle number: 00031444-ER, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 400 V, input frequency: 50 Hz, pressing force: 60 t, stroke length: 275 mm, operating speed: 160 mm/s, reverse speed: 165 mm/s, table length: 1,270 mm, table height: 900 mm, throat depth: 410 mm, oil tank capacity: 150 l, total length: 3,175 mm, total width: 2,100 mm, total height: 2,580 mm, overall weight: 4,320 kg, Equipment: documentation/manual, Manufacturer: ERMAKSAN Model: Speed-Bend Pro 1270×60 Machine type: CNC Hydraulic Press Brake The ERMAKSAN Speed-Bend Pro 1270×60 is a high-precision CNC hydraulic press brake designed for accurate and efficient sheet metal bending. With a maximum bending force of 60 tons and a bending length of 1,270 mm, this machine is suitable for a wide range of industrial sheet metal processing applications. Technical Specifications Maximum bending force: 60 tons (600 kN) Maximum bending length: 1,270 mm Ram stroke: 275 mm Table height: 900 mm Table width: 90 mm Main motor power: 7.5 kW Power supply: 400 V, 3-phase, 50 Hz CNC control: Delem DA-66T (depending on machine configuration) Tool Clamping System: European-style tooling clamping system Side safety guards Foot control: Dual foot pedal Electrical system: Siemens Hydraulic system: Hoerbiger hydraulic system Controller: CYBELEC CYBTOUCH 15PS 2D Upper Tooling (Punch): Rolleri PS 135.85.R08 Isdpjz Slyqsfx Acpobc Machine available from January 16, 2027.

Condition: good (used), Year of construction: 1957, Container rotator, boiler rotator, welding rotator, welding rotator, welding device, welding turntable, welding rotator -Manufacturer: M.Heitze / Deuma Heitze, Container rotating device, welding rotating device type 405/0 -Load capacity: kg Isdpfx Aez Szkwscpjbc -Roller spacing: 240 - 780 mm -Rollers: Ø 185 x 105 mm -Rolling speed: 0.15 to 0.70 m/min Right/Left rotation -Control unit: with foot switch -Individual components: see photos -Transport dimensions: 1160/920/H785 mm / 600/540/H785 mm -Weight: 411 kg / 221 kg

Condition: good (used), Year of construction: 2011, machine/vehicle number: B0702A0516, functionality: fully functional, TRUMPF TruBend 7036 – CNC Press Brake – Year of manufacture 2011 – Extensive equipment Machine data Feature Description Manufacturer TRUMPF Model TruBend 7036 Year of manufacture 2011 Machine type CNC Press Brake Isdpfx Aoz S N Ecscpjbc Press force 360 kN (36 t) Bending length 1,020 mm Control system TRUMPF TASC 6000 Back gauge 6 axes Machine no. B0702A0516 Connection 400 V / 50 Hz Location Germany Description For sale is a TRUMPF TruBend 7036 from the year 2011 with extensive special equipment. The TruBend 7036 is a compact, high-precision CNC press brake that is particularly suitable for the economical processing of small and medium-sized sheet metal parts. Thanks to the electromechanical direct drive and the ergonomic design, the machine is ideal for precise and efficient bending operations. Equipment and special options Machine and control system - TRUMPF TASC 6000 CNC control system - 15-inch touchscreen - Graphical workshop programming - Electromechanical direct drive (torque motor) - High-precision length measuring system - 6-axis back gauge system - Bending line laser - BendGuard safety system (block laser) - Automatic tool clamping - Operating data acquisition - Work area lighting at the front and rear (LED) Ergonomics package - Comfort support table - Comfort footrest - Swiveling control unit - Seat and standing aid - Storage consoles - Document holders Productivity Plus Package - Graphical workshop programming - Automatic tool clamping - BendGuard (block laser) Extensive accessories Additional information The machine was originally ordered with extensive special equipment and is particularly suitable for: - Fine sheet metal processing - Precision bent parts - Small series production - Prototype construction - Complex bent parts For sale due to business closure.

Condition: used, Year of construction: 2008, functionality: fully functional, total length: 4,000 mm, quill stroke: 350 mm, quill travel distance: 350 mm, overall weight: 24,350 kg, input voltage: 400 V, power: 38.5 kW (52.35 HP), type of input current: three-phase, AMADA HFP 400-4L NT CNC HYDRAULIC PRESS BRAKE – 400 TONS / 4 METERS Amada HFP 400-4L NT hydraulic press brake from 2008, manufactured in France by Amada Europe. Robust and rigid machine, designed for bending thick sheet metal and large lengths in boiler making, metal construction, and industrial sheet metal fabrication. TECHNICAL SPECIFICATIONS - Manufacturer: Amada (Amada Europe S.A., France) - Model: HFP NT 400-4L - Year of manufacture: October 2008 - Serial number: B080063 - Bending force: 4,000 kN (approximately 400 tons) Isdpfsz Sva Hox Acpsbc - Bending length: approximately 4 meters - Maximum stroke: 350 mm - Machine weight: 24,350 kg - Power supply: 400/415 V – 50 Hz – three-phase - Installed power: 38.5 kW - Rated current: 67 A - Sound level: less than 75 dB(A) - CE marking NUMERICAL CONTROL - Original Amada AMNC PC control system - Programming screen mounted on a pivoting arm - Remote electronic handwheel for fine adjustment (x5 function) - Control panel with emergency stop and test mode - Floor-mounted control pedal SAFETY - Fiessler AKAS laser safety barrier, with AKAS II-3M receiver - Operator hand protection as close as possible to the punch - Closed protective grating at the rear of the machine BACK GAUGES - Motorized back gauges controlled by the numerical control system - Guided by ball screws and linear rails - Repeatable sheet metal positioning INCLUDED TOOLING - Segmented punches and dies mounted on the machine - Additional set of dies, punches (including Eurostamp), and accessories, on a pallet and in a crate CONDITION Machine located in an active workshop, complete equipment (control, safety barrier, back gauges, tooling). Paintwork worn, consistent with industrial use. SALES CONDITIONS - Location: Netherlands - Incoterm: EXW Dordrecht (negotiable) - Disassembly, loading, and transport are the responsibility of the buyer - Availability: from November 3, 2026 - Inspection possible by appointment

Condition: good (used), Year of construction: 1987, machine/vehicle number: 12871, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 380 V, pressing force: 112 t, oil tank capacity: 120 l, total length: 3,300 mm, total width: 2,150 mm, total height: 2,500 mm, overall weight: 10,000 kg, controller manufacturer: DELEM, controller model: EA 22, working length: 3,100 mm, DARLEY EHP 110 31/25 press brake - including foot switch and the bending tool located on the machine Ibjdpfx Asz I N D Njcpoc FCA D-35614 Aßlar - loaded onto a truck