Used Stb 300/30B for sale (12,578)

Condition: used, empty load weight: 650 kg, maximum load weight: 2,350 kg, overall weight: 3,000 kg, axle configuration: 2 axles, first registration: 08/1991, loading space length: 2,970 mm, loading space width: 1,500 mm, loading space height: 400 mm, suspension: steel, tire size: 185R14C, color: orange, mileage: 1,001 km, gearing type: other, driver cabin: other, Vehicle location: Bovenden, 2-axle, tandem, leaf suspension, flap, front support Body: Tandem low loader trailer with aluminum drop sides and aluminum access ramp Loading height approx. 600mm! Ramp length approx. 1500mm! AL-KO axles! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Nsdpfx Akoi Rlb Ejuslb - .

Condition: good (used), Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Mr. Simon Blank The delivery includes: 01x Shelf, II. choice Material color: Sendzimir galvanized Length: approx. 1,285 mm Depth: approx. 340 mm Height: approx. 30 mm Weight / pc.: approx. 4.30 kg Technical data of the shelf: Nlsdpfx Akshrdl Tsueb Manufacturer: SSI Schäfer Type: R3000 Type designation: ZB1351308V Max. load per shelf 150 kg with evenly distributed load General information about the item: This item is only offered for pickup. Any transport or shipment of this item incurs additional costs, which can be obtained from us depending on the place of delivery or the scope of delivery. Our services at a glance: (Prices on request) Assembly, installation our general assembly conditions must be observed Shelf inspection Rack inspection according to DIN EN 15635 carried out according to the requirements of BGR 234 visual inspection for all rack systems Delivery with our own fleet (without unloading)

Condition: new, total length: 5,000 mm, total width: 4,250 mm, 21.25 m² storage platform, upper edge 300 cm, 500 kg/m², immediately ex warehouse, accessible with pallet truck, system platform, steel platform, storage level Data : - Length: 5000 mm - Width: 4250 mm - Size can be extended on request - Clear height below the platform: 2612 mm - Support grid: 4605 x 3850 mm - Plus 200 mm overhang of the floor covering - Uprights, cross bracing & dome struts powder-coated in RAL 7016 - Main & secondary beams galvanized - Floor covering: 38 mm chipboard P6, top natural & bottom white - New from stock Wietmarschen - AVAILABLE IMMEDIATELY Storage platform consists of : - 04 x upright - 02 x main beam C+350 - 06 x secondary beam S+260 - 01 x intersection - 02 x strut brace - 10 x chipboard - Incl. connecting material & screws -- IMMEDIATELY AVAILABLE SEVERAL TIMES Price : 2590,00 € net 3082,10 € gross You will receive an invoice with VAT shown. Transportation : Nodpfxey Uh U Eo Akuelb The delivery is carried out on request by our partner forwarding agency, the costs for this depend on the postal code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation. Are you interested or do you have any questions? Simply contact us by message or phone call. You can find our telephone number on our company page. ☎️ You can reach us by phone from Monday to Friday, 08:00 - 15:00. Alternatively, you can send us a message with your name and number and we will get back to you as soon as possible.

Condition: new, Year of construction: 2022, Cantilever rack NEW PRODUCT Data: - H: approx. 300 cm - D: approx. 137 cm - L: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle dimension: 131 cm - NEW PRODUCT immediately from stock. - 500 kg load per arm - 2250 kg load per stand - Stand in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 100 mm increments. - Levels: base + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stands, including base approx. 300 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 80 - including all necessary connecting elements and screws. Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the shelf uprights and cantilevers are statically verifiable, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Angle steel braces, so no adjustment using turnbuckles is necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the stand profile. Price: €2265.00 net Nlodpfx Akey Uhx Djusb + legally applicable VAT. You will receive an invoice with VAT shown. Transport: Delivery is carried out by our partner shipping company on request, the costs for this depend on the postcode. Assembly: If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment. Our recommendation: Let us know what you need... We will be happy to help you with the realization of your projects, from planning to ordering to assembly.

Condition: like new (used), 300 running metres of Nedcon pallet racking New goods, see pictures! A top racking system of the large manufacturer NEDCON - this is a subsidiary of Voestalpine AG with headquarters in Holland. Height 6,5 m Depth 110 cm, blue beam length 2,7 m orange Beam with load / shelf 3050 kg Negotiable price: € 50.280,-- net ex stock Offer consists of: + 108 pcs. frames pre-assembled, depth 110 cm, height 6,5 m + 642 pcs. beams, length 2,7 m, 3050 kg payload/shelf +1284 pcs. suspension locks + 216 pcs. concrete anchors Load plates, documents etc. are a matter of course. Further accessories can be found in the accessories catalogue. Frame blue RAL 5019, infill panels galvanised. 2 m to 7 m heights in stock. Bay load 12 tons, higher bay loads possible on request. Beams orange RAL 2008. Beam lengths: 1.85 m, 2.7 m, 3.3 m, 3.6 m in stock. Goods in stock. Transport and assembly possible on request. Other composition on request. Over 2000 meters available. Viewing possible at any time by arrangement. More info on request. Constantly over 5000 running meters of pallet racks from numerous manufacturers in stock. (Changes and errors in the technical data, specifications and prices and prices as well as prior sale reserved! See our AGB, all prices excl. VAT ex stock) Nlodpjfi U Afefx Akuob Purchase / Sale We are constantly looking for and offering numerous items from a wide variety of areas broom-clean business clearances company liquidations Fast- flexible - ready to hit! We clear and - or dispose also f [...]

Condition: excellent (used), CATALOG NO. 7227 TECHNICAL DATA - Working width: 40 – 300 mm - Material thickness: 10 – 35 mm - Min. material length: 270 mm - Max. material length: unlimited - Max. feed speed: 90 m/min - Feed speed steplessly adjustable via inverter from control panel - Cutting speed: 24 m/min - Milling motor power: 2x 4 kW - Milling spindle speed: 7,500 rpm - Feed motor power: 0.75 kW - Pneumatic top and side pressure - Spindle diameter: 40 mm Nlodpfxsy Rzcus Akujb - Motor-driven infeed roller conveyor, length 1,130 mm - Manual / automatic operation - PLC controller with touchscreen for easy operation - Compressed air connection: 8 bar - Extraction outlet diameter: 150 mm - Dimensions (L/W/H): 2,550 x 1,200 x 1,400 mm - Weight: 1,100 kg ADVANTAGES – German manufacturing – Operating and maintenance documentation (DTR) – Machine for tongue and groove profiling – Set includes complete cutter and head set – Motor-driven infeed roller conveyor – Unpainted – Used machine, in very good condition Net price: 107,900 PLN Net price: 25,690 EUR (according to exchange rate 4.2 EUR/PLN) (Prices may vary depending on currency fluctuations)

Condition: new, Rexroth MSM030B-0300-NN-M0-CG1 Servo motor SN:295554-G0789 ,unused in opened original packaging, 100% functional, scope of delivery according to photos Nodpfx Aji D Nrgskuolb

Condition: used, functionality: unexamined, Dear Sir or Madam, We hereby offer you the following device for sale: Keyence WM-C3000 coordinate measuring machine. The machine is sold with the equipment documented in the photos and specified in the advertisement text. Location: 40764 Langenfeld ATTENTION! The device originates from an insolvency. We are auctioning it off to the highest bidder on behalf of the creditor/bank. This is a closed auction. We do not provide any information about the current highest bid. Your bid becomes binding upon receipt by email. Please send us your binding bid by 10 a.m. on 13 May 2026. Nledjyrcx Eopfx Akuob After the auction ends, you will be informed of the auction result within 72 hours.

Condition: new, For sale: Professional carrying harness for self-contained breathing apparatus (SCBA) Dräger PSS 7000 • Model: PSS 7000 • Pressure gauge: up to 300 bar • Part No: 3355850 • Type No: 3355068 • Technical condition: good • Complete set of straps and buckles • Sturdy frame with no cracks Selling exactly what is shown in the photos. No cylinder or face mask included. Nedpey Ilvgjfx Akuslb Firefighter-grade equipment – top series from Dräger.

Condition: used, The CAT 500 cutting center is an automatic machine designed for cutting PVC profiles using a circular saw. The numerical control unit, together with the management software, allows the programming of machining parameters, leaving the operator with the sole task of loading the bars and unloading the finished pieces. Cutting type: 45° / 90° cutting (left) Adjustable angle cutting Blade specifications: Bore: Ø 30 mm Diameter: Ø 500 mm Speed: 3000 rpm Max thickness: 4.2 mm Technical data: Voltage: 380–400 V AC3PE Current: 8 A Frequency: 50 Hz Power: 3.8 kW Air pressure: 7 bar Weight: 2300 kg Standard accessories: Carbide blade Ø 500 mm (Ø30 bore) Electro-welded steel structure with leveling feet and floor anchoring Industrial PC on board the machine Motorized profile pusher with brushless motor Motorized blade rotation (left) with brushless motor Feeding belts with inverter and acceleration/deceleration ramps Label printer Dimensions: Nlodpoy I Twfjfx Akuob Loader: 7900 mm MC: 1000 mm Unloading: 2600 mm Pusher: 6500 mm Max width: 2300 mm Max height: 1700 mm

Condition: excellent (used), CATALOG NO. 6985 Njdpfsy Drn Uox Akuolb TECHNICAL DATA - Max workpiece width: 300 mm - Max workpiece height: 200 mm - Unit: grooved rubber roller + pad + metal roller - Working table: 1230x440 mm - Belt: 300x1900 mm From above: - Rubber slip roller - Unit approx. 7.5 kW - Rubber slip roller From below: - Traction belt - Pneumatic oscillation - 2 feed speeds - Feed motor 0.85 kW - Extraction port diameter: 110 mm - Dimensions (L/W/H): 1250/1000/1950 mm - Weight: 530 kg - Not painted - Used sander - Very good condition Net price: 13,900 PLN Net price: 3,300 EUR Net price calculated at exchange rate 4.2 PLN/EUR (In case of greater exchange rate fluctuations, the price may change)

Condition: used, functionality: fully functional, ES-300 ASTD cutting machine – fixed bridge saw for cutting marble, granite, and ceramics, model ES-300 A with automatic X and Z axis movement, rear stop with handwheel, and 2 idle roller conveyors. Nledpey Dch Eofx Akujb

Condition: used, 2x KWB Powerfire TDS 300 Wood Chip Boilers – approx. 600 kW For sale are two KWB Powerfire TDS 300 wood chip boilers, which were operated together in a cascade system. 👉 Total output: approx. 600 kW — Technical Highlights: • Rotary grate combustion system – robust, self-cleaning • Cyclone combustion chamber – clean combustion, low emissions • Lambda control – optimal efficiency • Fully automatic output modulation • Automatic heat exchanger cleaning • KWB Comfort 3 control system • Suitable for both wood chips and pellets — Advantages of the Cascade System: • Flexible performance adjustment as required • Very efficient in partial load operation • Each boiler can be operated independently • Redundancy / operational reliability — Scope of Supply: ✔ Includes feed auger on both boilers (ca. 1 m screw conveyor with drive motor, mounted directly on the boiler – feeds fuel directly into the combustion chamber) ⚠️ Note: No discharge / conveying system (fuel extraction from store) → available on request at additional cost — 📍 Location: Mosonmagyaróvár, Hungary 👉 approx. 80 km from Vienna 👉 approx. 35 km from Parndorf TOP HEATING SYSTEMS – Used heating systems, boilers, heat pumps & accessories direct from stock We are a family business with around 20 years of experience in heating technology. Our 1,500 m² warehouse in Mosonmagyaróvár, Hungary, maintains a permanent stock of approx. 50–60 units. 📍 Location: Our warehouse is located in Mosonmagyaróvár, Hungary – approx. 15 km from the Austrian border and approx. 80 km from Vienna. Mosonmagyaróvár is the first major city after the Austrian-Hungarian border. 🔥 Our product range includes: • Wood chip boilers • Pellet boilers • Log gasification boilers • Log boilers • Biomass boilers • Oil and gas boilers • Heat pumps • Thermoventilators • Hot air blowers • Warm air heating units • Industrial heaters • Buffer tanks • Heat exchangers • Screw conveyors • Fuel extraction systems • Burners • Pumps • A comprehensive range of heating accessories ⚙️ Accessories and Components: We also offer a broad range of accessories, including circulation pumps, plate heat exchangers, and many other components for private to industrial applications. Nodpfx Aey A Ewtskuslb 🏭 Brands in our portfolio: Fröling, Hargassner, KWB, HDG, Binder, ETA, Herz, Guntamatic, Windhager, Viessmann, Buderus, and many more. 🌐 Current offers: Most of our current offers can be found on our website: topheatingsystems.com We also have additional equipment in stock that is not yet listed online. 📅 Inspection: Viewing at our warehouse is possible by appointment. If interested, please contact us – we look forward to helping you find the right solution.

Condition: new, Year of construction: 2026, functionality: fully functional, load capacity: 1,000 kg, mesh size: 50,100 mm, 300 x wire mesh decking for pallet racking (Euro pallets) approx. 88 cm x 110 cm, galvanized Load capacity 1,000 kg (with evenly distributed load) For beams 182.5 cm + 270 cm long with 4 cm beam thickness Nledpeyzb Acsfx Akuob Shipping / Delivery: - max. 7 business days after receipt of payment - delivered free to site / installation location - Unloading from truck to be carried out by the buyer using their own lifting equipment - Deliveries within the entire territory of Germany, excluding islands! Deliveries to EU countries by individual arrangement.

Condition: new, functionality: fully functional, power: 110 kW (149.56 HP), fuel type: electric, color: other, overall weight: 21,360 kg, Year of construction: 2026, Jaw Crushers generally crushes 200 to 300 tons per hour, according to their capacity. Higher capacity jaw crushers can be produced according to customers needed. The jaw crushers are generally used to crush the hardest rocks such as basalt, granite, and gabbro. With its strong and durable jaw structure, it has been one of the most preferred crushers of the mining industry for many years. With jaw adjustment you can get the desired product and desired capacities very well. It can be easily adjusted by its hydraulic pistons. GENERAL SPECIFICATIONS AND FUTURES: -Belt-pulley drive system -Jaw Plates manufactured from custom made cast high manganese steel with a high level of wear resistance -Eccentric shaft manufactured from Cr, Ni, Mo alloyed forged steel -Adjustable jaw opening with hydraulic setting -Utilizing toggle plates for safety purposes in case of overloading -The surfaces which exposed to abrasion are coated with lining plates TECHNICAL SPECIFICATIONS: • Model: FABO CLK 1175 • Type: Primary Jaw Crusher • Inlet Dimensions: 1070 x 760 mm • Jaw Opening: 45-160 mm • Max Feeding: 760 mm • Capacity: 200 to 300 Ton Per Hour • Motor: Heavy duty GAMAK, 110 Kw Nlodoy Dpl Ropfx Akueb • Bearings: Heavy duty SKF-FAG • Weight: 21360 kg • Dimension: 2730 x 1698 x 2492 mm • Including motor and safety guards. *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: good (used), Year of construction: 2005, functionality: fully functional, workpiece weight (max.): 1,230 kg, AUTOMATIC SAW / DOUBLE HEAD STB / FIMTEC SD 500 S6 YEAR 2005 Nlsdpfjr E Alqsx Akujb

Condition: new, empty load weight: 531 kg, maximum load weight: 769 kg, overall weight: 1,300 kg, loading space length: 2,510 mm, loading space width: 1,330 mm, loading space height: 1,680 mm, loading space volume: 5.5 m³, color: white, construction height: 2,300 mm, working width: 1,850 mm, Hydraulics, automatic reverse drive, hot-dip galvanized, with sandwich body made of PurFerro, 30 mm thick roof/walls, braked, * IMMEDIATELY AVAILABLE * Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY! - Gross vehicle weight: 1300kg - Unladen weight: 531 kg - Payload: 769 kg - Interior dimensions: 251 x 133 x 168 cm (L x W x H) - Overall exterior dimensions: 392 x 184 x 230 cm (LxWxH) - Loading sill height: 54 cm - Tires: 185/65R14 steel rim - Brake: yes - Support wheel: yes - 100km/h: at extra charge - incl. vehicle documents Vehicle body: - Floor: Wood, screen printing plate 15mm - Walls: 30mm PureFerro sandwich structure (sheet steel/polyurethane/sheet steel) - Roof material: 30mm PureFerro sandwich structure (sheet steel/polyurethane/sheet steel) - Chassis: ALKO rubber spring axle - Number of lashing eyes: Lashing eye rail inside on the side, incl. 4 lashing eyes - Rear door Yes, single-leaf - Tailgate: No - Tailgate material: - - Tailgate/door function: espagnolette lock, stainless steel - Interior light: Yes, with switch + LED lighting - Supports: at an extra charge Overrun device & brake: Yes, Knott - Frame/chassis: V-drawbar, hot-dip galvanized - Lighting plug: 13-pin - Approval: COC papers Standard equipment: - Sturdy V-drawbar, hot-dip galvanized - Overrun device from ALKO - Floor plate 15 mm thick - Side walls and roof : sandwich construction made of PurFerro, 30 mm thick - core made of foamed polyurethane with a top layer on both sides made of galvanized and polyester-coated sheet steel - sandwich box surrounds are made of anodized aluminium - refrigeration unit (various manufacturers installed, depending on availability) - smooth-running high-performance refrigeration machine with electronically controlled defrosting - 230 volt supply voltage with interior lighting - water-protected control panel with digital temperature display - control range from +2 - + 10 C, - Cooling capacity 1800 watts at + 30 C ambient temperature - Interior light fitted, LED + conventional - Single-leaf rear door - Galvanized espagnolette lock and hinges - Lashing rings in the frame profile, tensile force 400 kg per lashing ring, Dekra tested - Support wheel - Automatic reversing system - Plastic mudguards - 13-pin plug - Reversing lights - Large reversing lights plug - reversing lights - large safety lighting - integrated rear fog light - body: splash-proof - registration papers: ZBII & COC papers Accessories can be retrofitted - please enquire: - anti-theft device - rear supports - 100km/H approval with wheel bumper - lashing straps - additional lashing eyes - slotted-hole rails for tensioning straps & locking beams - bar strip with rubber coating for tensioning straps & locking beams - steel or aluminum locking beams - interior lights - reversing lights - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Nsdpfx Akju Hrureuslb

Condition: used, Year of construction: 2004, power capacity 30/37 kW volt 380 V ampere 70/78 A Nledpfsx I Sd Rex Akueb

Condition: good (used), The scope of delivery includes: 01x Shelf connector, used Manufacturer: Dexion type: P90 for shelf distance: approx. 300 mm total length: approx. 380 mm cross section: U 51 x 25 mm Material color: sendzimir galvanized Nsdpfxsi Enw So Akuelb Weight: 0,47 kg | pcs.

Condition: good (used), The scope of delivery includes: Nsdoi Enyfepfx Akuolb 01x shelf connector, used for shelf distance: 300 mm profile dim.: U 50 x 40 mm Material color: blue Weight: 0,55 kg | pcs.

Condition: good (used), Technical data for the shelf connector: Shelf system: Bito Included in delivery are: 01x shelf connector, used Material color: sendzimir galvanized total length: approx. 300 mm Nedpfx Akjig Hv Usuolb center-center hole: approx. 260 mm profile dim.: L 50 x 50 mm material thickness: approx. 2,00 mm Weight/piece: approx. 0,437 kg

Condition: good (used), The scope of delivery includes: Nljdpfei Enyuex Akusb 01x Shelf connector, used Shelf system: Nedcon type: NS suitable for frame profile width: 100 mm for shelf distance: 300 mm profile dim.: U 65 x 40 mm weight: 0,83 kg | pcs.

Condition: good (used), Year of construction: 2024, Welding turntable KT 300 Load horizontal 300 KG, tilted 150 KG Power consumption 220V, 50 Hz table diameter 450mm height 500mm Tilt range stepless via crank gear motor 0 - 90°. Nsdpebvk I Ejfx Akuelb speed 0,3 - 2,5 rpm Incl. foot remote control Surcharge: Quick release - jaw chuck diameter 300mm, 450.-€

Condition: new, Year of construction: 2024, load capacity: 300 kg, Equipment: foot remote control, rotational speed infinitely variable, Protec KT 300 H welding turntable, 170/400 special version Horizontal load 300 kg, tilted 150 kg Power consumption 220 V, 50 Hz Table diameter 450mm Hollow shaft diameter 170mm Nodpfx Aovbrqxjkuelb Table height 500mm Welding current transmission 400 A Quick-action chuck diameter 300mm, surcharge 550.-€ Quick-action chuck diameter 400mm, surcharge 750.-€ Crank gear motor 0 - 90° stepless adjustment Infinitely variable speed 0.01 to approx. 5 rpm. incl. foot remote control Digital display with welding time limiter (if required)

Condition: new, Year of construction: 2024, load capacity: 300 kg, Protec KT 300 H welding turntable, 170/400 special version Nlsdpforypmvex Akujb Horizontal load 300 kg, tilted 150 kg Power consumption 220 V, 50 Hz Table diameter 450mm Hollow shaft diameter 170mm Table height 500mm Welding current transmission 400 A Quick-action chuck diameter 300mm, surcharge 550.-€ Quick-action chuck diameter 400mm, surcharge 750.-€ Crank gear motor 0 - 90° stepless adjustment Infinitely variable speed 0.01 to approx. 5 rpm. incl. foot remote control Digital display with welding time limiter (if required)