Used Stegmann K... for sale (35,667)

Condition: used, Absolute encoder, encoder, encoder, encoder, absolute encoder, absolute encoder, function encoder, resolver, resolver, rotary encoder -Manufacturer: Stegmann, rotary encoder encoder Hnedpfx Asqz Ai Nokreu -Type: K. unfortunately no exact type designation can be read -Voltage: see photo of nameplate -Shaft: Ø 6 x 30 mm -Dimensions: Ø 90 x 140 mm -Weight: 1.0 kg

Condition: good (used), Year of construction: 2020, functionality: fully functional, For sale: A selection of ABB robots and turntables. Available models listed below: ABB Robots ABB IRB6700-155 MH IRC5 ABB IRB6700-200 SW IRC5 ABB IRB6700-235 SW IRC5 ABB IRC5M2004 Hsdpfx Asz Sqhfjkrenu ABB Turntables (Positioners) ABB IRBP B-750 ABB IRBP C-500 ABB IRBP K-300 L3150 D1200 ABB IRBPM2004K-300

Condition: used, Year of construction: 2025, operating hours: 10,329 h, functionality: fully functional, overall weight: 12,000 kg, Manufacturer: Fidia Type: K 165 Type: 5-axis machining center Technical data: Year of manufacture: 2005 Hsdpfx Aksz Rmn Soronu Table size: 1400 mm x 820 mm X-axis travel: 1000 mm, Y-axis travel: 620 mm, Z-axis travel: 700 mm Control system: Fidia C 1 Maximum table load: 2000 kg Weight: 12,000 kg Currently in operation. I will be publishing detailed technical specifications shortly.

Condition: used, Year of construction: 2021, machine/vehicle number: K3999, functionality: fully functional, operating hours: 5,384 h, power: 14.6 kW (19.85 HP), input voltage: 400 V, input current: 29 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, feed rate X-axis: 10 m/min, total height: 1,430 mm, total length: 5,250 mm, total width: 1,230 mm, overall weight: 1,700 kg, Equipment: CE marking, documentation/manual, Hebrock K36 AIRTRONIC edge banding machine – zero joint, 2021, low mileage We are selling a single-sided edge banding machine from Maschinenbau Hebrock GmbH (Hüllhorst, Germany), model K 36 with AIRTRONIC system, machine number K3999, year of manufacture 2021. The machine is currently in operation at our facility – fully functional and ready for immediate use. Zero joint – this is what sets this machine apart. The edge banding machine is equipped with an Airtronic hot air unit. Compressed air heated to 300–600 °C is directed through a nozzle directly onto the functional layer of the edge band, just before the pressing zone – the edge band fuses with the panel without a visible glue line. In practice, this means the ability to edge band acrylic, high-gloss, and lacquered fronts with quality comparable to laser technology, without investing hundreds of thousands of zlotys in a laser machine. This is the most expensive and rarest option in this class of edge banding machines – on the used market, there are literally only a few machines with a zero joint available across Europe. The machine can also operate in a conventional mode, using standard EVA and PUR hot melt adhesive. Mileage – documented by the machine’s counters: Operating hours: 5,384 mth Length of edge band applied: 619,339 m (619 km) Parameter Value Type K 36 Machine number K3999 Hedpfxezvu Eke Akrjnu Year of manufacture 2021 Voltage / frequency 400 V / 50 Hz Rated current 28.9 A Total power 14.6 kW Operating hours 5,384 mth Edge length 619,339 m Machine name Single-sided edge banding machine with Airtronic zero joint Machine number K3999 Functionality Fully functional Operating hours 5384 Live demonstration possible Weight / dimensions 1700 kg · 5250 × 1230 × 1430 mm Input current 28.9 A (rounded to 29) Workpiece height 60 mm X-axis feed 10 m/min Edge thickness 3 mm PRICE 250,000 NET

Year of construction: 1988, condition: used, Operating voltage: 3x 380V, frequency: 50Hz, rated current: 40A, fuse protection: 50A, control voltage: 220V, DC voltage: 215/323V, an on-site inspection is possible. Hnedpoz S Iw Dofx Akrsu

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 669604, overall weight: 1,192 kg, load capacity: 120 kg, arm reach: 3,500 mm, controller manufacturer: kuka, controller model: fives Cinetic 15A81-02, teach pendant manufacturer: kuka, teach pendant model: 00-168-334, control cabinet width: 1,100 mm, control cabinet height: 1,910 mm, input voltage: 400 V, input current: 16 A, type of input current: AC, repeat accuracy: 0.06 mm, warranty duration: 6 months, The KUKA robot has been meticulously serviced by KUKA and was last operated in 2024. Its full machine operation was successfully tested prior to removal from a automotive site in 2026. Complete with all relevant cables, pendant, accessories and end of arm tooling. Versatile, streamlined, powerful and robust – those are the typical characteristics of the KR QUANTEC series, the best-selling robot series from KUKA. We have 2 available. Hnsdpfx Aoy R Aicekreu

Condition: good (used), functionality: fully functional, Cut: 1540 x 3.5 mm – Handle recesses in the table – motorized stop Hjdpfxez R Rihe Akrjnu

Condition: used, Year of construction: 2009, operating hours: 61,894 h, travel distance X-axis: 2,340 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, feed length X-axis: 2,340 mm, feed length Y-axis: 800 mm, feed length Z-axis: 600 mm, nominal power (apparent): 25 kVA, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, total height: 3,250 mm, total length: 6,200 mm, total width: 3,700 mm, table width: 750 mm, table height: 930 mm, table length: 1,400 mm, rotary table diameter: 800 mm, rotational speed (min.): 50 rpm, rotational speed (max.): 12,000 rpm, overall weight: 16,000 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 12,000 rpm, spindle nose: SK 40, number of slots in tool magazine: 30, tool length: 330 mm, tool diameter: 80 mm, tool weight: 15,000 g, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, We offer this used Hedelius RS 80-K-2300 5-axis machining center, manufactured in 2009. Key Data Hnjdpfx Aoz Hx Ihokreu Manufacturer HEDELIUS GmbH Type RS 80-K-2300 Year of Manufacture 2009 Power Requirement / Voltage 29 kW / 400 V / 50 Hz (25 kVA) Total Weight 16000 kg Footprint Length 6.20 m Width 3.70 m Height 3.25 m Control System Program Input HEIDENHAIN Controller iTNC 530 NC Software Version 340490 04 SP4 PLC Software Version RS80_K V1.54 Development Level L4 Operating Hours Control System On 63333 Machine On 61894 Program Run Time 28295 Travel Ranges (Total Working Area) X-Axis 2340 Y-Axis 800 Z-Axis 600 Right Working Area (Fixed Machine Table Area) X-Axis 945 Y-Axis 800 Z-Axis 600 Left Working Area (Rotary/Swivel Table Area) (simultaneous machining possible) X-Axis 800 Y-Axis 800 Z-Axis 600 A-Axis +10° / -90° C-Axis 0 - 360° Clamping Surface - Fixed Machine Table Length 1400 Width 750 Clamping Surface - Rotary/Swivel Table Length Ø 800 Width 630 Work Table T-Slots DIN 650 Slot Width 18 / 18 mm Slot Pitch 125 / 125 mm Number 5 / 5 Table Height Fixed Machine Table 930 mm Celox Motor Spindle Manufacturer Kessler Type DMS 100.XL-633.607 Speed Range 50 – 12000 rpm Tool Shank SK 40 Tool Magazine Magazine Capacity 30 tools Max. Tool Diameter Ø 80 mm (with available free slots) Ø 125 mm Max. Tool Length 330 mm Max. Individual Tool Weight 15 kg Total Magazine Weight 450 kg Special Accessories Scraper Conveyor AME GmbH Total Length ≈ 5700 Height ≈ 1760 Depth ≈ 830 Weight 515 kg Band Filter System (High-Pressure Coolant System) Model PS 120 Tank Capacity 780 l Flow Rate 120 l/min Filter Fleece 670 mm 100 m on a roll Length ≈ 2320 Height ≈ 1060 Depth ≈ 850 Weight 515 kg Motor Spindle - Cooling Unit Manufacturer Hyfra GmbH Type Chilly-25-S Machine No. 09010098 Year of Manufacture 2009 Weight 65 kg Control Cabinet - Cooling Unit Manufacturer Pfannenberg Type DTS 7101 SC Model No. 08390173726 Laser Light Barrier Manufacturer BLUM Type P87.0634 Laser System MINI – MICRO - NANO Wireless Measuring Probe Manufacturer HEXAGON Model m&h Radio-wave Touch Probe Type RWP20.50-M Extra KinematicsOpt HEDELIUS Transformation Kit If you have any questions or require further information, please do not hesitate to contact us.

Condition: used, Year of construction: 2016, Aumann LWS/K 6-160 linear winding machine / production system for niQ stators, year of manufacture 2016. Two identical machines are available. Technical data: compressed air connection 5 bar, mains fuse 32 A, rated current 7.2 A, operating voltage 3 x 400 V / N / PE, 50 Hz, control voltage 24 V DC, connected load 5 kVA. Dimensions approx. 1,950 x 1,970 x 2,150 mm (L x W x H). The machines are offered including documentation. An on-site inspection is possible by appointment. Hnedpfx Aoz I Dc Hjkrou

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, KOLBE K440 | Meat, bone, and frozen food band saw Manufacturer: KOLBE Spezialmaschinen GmbH Hjdpfx Aksz S N Uweronu Model / Type: K 440 (K440) Serial number: 96 0378 Year of manufacture: 2000 Power supply: 400 V, 50 Hz, 5.4 A Power: 2.5 kW Overall dimensions: 1000 x 1000 x 1900 mm Length and width of the cutting blade: 3370 x 16 mm The KOLBE K440 is a highly efficient, stationary band saw, valued in the food industry, designed for the precise portioning of fresh and frozen meat, bone-in cuts, beef and pork bones, and frozen blocks. Products from the renowned German brand Kolbe are synonymous with reliability, unparalleled performance, and the highest level of operator safety in meat processing. The unit is equipped with a powerful 2.5 kW drive unit, which ensures a constant, high blade speed even when processing the hardest materials. The well-designed ergonomics of the work table, along with the appropriate height and width of the feed, allow for efficient handling of large anatomical pieces. The use of a blade with dimensions of 3370 x 16 mm guarantees clean, even cuts without frayed edges and minimizes material loss in the form of chips.

Condition: good (used), Year of construction: 2011, functionality: fully functional, 5-axis machining center Hedelius RS 805 K Control system: Heidenhain iTNC 530 Year of manufacture: 2011 Internal machine number: 78 Travel ranges: X-axis 1,500 mm Y-axis 800 mm Z-axis 600 mm Tool holder: SK 40 Tool magazine: 30 positions Spindle speed: 12,000 rpm Accessories: - Inclined bed coolant system SKM 900 - Internal coolant system 25 bar - Chip conveyor Hsdpjz Iw Tfofx Akrenu - Operating panel - Air blow guns - Flushing guns

Condition: excellent (used), functionality: fully functional, hopper 150x100 cm hydraulic pressure drawer year of manufacture 1996 control from operator panel sieve 1.5 cm Hedpezx St Refx Akrenu CE marking

Condition: used, functionality: fully functional, Year of construction: 1995, operating hours: 10,567 h, We are selling a mobile excavator O&K MH PLUS, manufactured in 1995, with various accessories. The operating hour meter reads 10,567. Hjdpoz Hb Nnefx Akronu The tires were replaced approximately 4 years ago and show very little wear. Various hydraulic hoses have been replaced. See photos. The excavator is used very rarely and is always stored in a covered hall. Deep digging bucket: approx. 30 cm Deep digging bucket: approx. 80 cm Ditching bucket: approx. 200 cm The excavator must be picked up on site.

Condition: like new (used), Year of construction: 2023, Used System Year of Manufacture: 2023 Condition: Like new, very few operating hours Features and Technical Specifications: Hjdezlbqrspfx Akronu ECO JET DUO 6 XL ZRS stationary clean air filtration system for extracting wood dust and chips Fans: 2 x 7.5 kW Airflow: 10,000 m³/h Vacuum pressure: 2,700 Pa (total) / 2,200 Pa (static) 80 filters, each 2.50 m long, BIA Category M, electrically conductive, incl. support baskets Filter area: 77.6 m² Filter loading: 129 m³/(m² x h) Filter cleaning: AL-KO OPTI-JET® Pressure relief areas: 0.84 m² (rupture discs) Base structure with hopper and rotary valve; dry conveying with C-coupling ECO JET DUO 6 ZWR XL, 1,100 mm spacer ring for raising the unit, with 2 intake openings Base unit with feed hopper and ZRS 960/1 FG rotary valve for chip disposal via a customer-supplied transport fan into a silo or similar; transport line DN 200, approx. 1,260 mm, connection to be provided by the customer Rotary valve ZRS 960/1 FG: - ATEX Directive 94/9/EC; CE 0588 Ex II 1D/- (unit for indoor/outdoor use); EX D; FSA 11 ATEX 1614X - Motor: 0.18 kW / 0.78 A, 3-phase / 400 V / 50 Hz - Protection class/enclosure type: IP 54 / B3; Insulation class F - Speed: 41 rpm; Flow rate: 15,744 l/h*; 7 cells - Inlet/Outlet: 960 x 250 / 960 x 208 mm - Dimensions: 1,100 x 605 x 330 mm; Temperature range: up to 50 °C Additional features: - 400 mm suction inlet with check valve in rectangular duct - ECO JET backflow check valve 910 x 346 x 500 mm AL-KO Control System ACS II: - Touchscreen display, ST 1200 controller, Sitop Power power supply, 24 V control voltage, and integrated frequency converter for cascading up to 2 fans up to 37 kW with frequency converter transfer - Plain-text error messages on the display, as well as a collective error message and indicator light; manual start of discharge via display button and cleaning via button; cleaning start via differential pressure; Post-cleaning; external start via potential-free contact; operating hour counter; maintenance interval indicator; control cabinet lighting and ventilation; monitoring/evaluation of fire damper, residual dust sensor, fill level sensor, and maximum filter pressure - 10 individually controlled solenoid valves - Gate valve control in groups of 4 for up to 8 machines: control via potential-free contact (PFC) or induction coil; 24 V DC shut-off valves, motor-driven with single-wire control or electropneumatic; max. 4 plates per conveyor line - ZRS power module up to 0.18 kW; time parameters adjustable via touch display - Rupture disc sensor and evaluation unit; pressure transmitter for frequency converter; pressure cells; strobe light; 2 x PTC thermistor evaluations; rotation monitoring of the rotary valve - 24 V DC supply air/return air switching for summer/winter operation - Filter monitor/residual dust monitoring with evaluation unit in accordance with DIN EN 12779 and H3: If 0.3 mg/m³ is exceeded, a self-holding alarm is triggered and the recirculation damper switches to exhaust air - 10-terminal junction box, 24 V/230 V, fully wired for filter cleaning, including approx. 6 lfm of cable - Ducting system including elbows, branch pipes, reducers, PU hoses, machine connections, small parts, and EP dampers for exhaust from 11 woodworking machines 1 HRS as specified - Return air system in accordance with TRGS 553, with changeover damper and fire damper - Galvanized base frame for container l...

Condition: used, Year of construction: 2002, operating hours: 11,000 h, Equipment: all wheel drive, * O & K MH Plus wheeled excavator with approx. 11,000 operating hours - first commissioned in 2002 * With articulated system - quick coupler - hammer line and 5 buckets in total * Transport length : 7,900 mm - Total width : 2,500 mm - Total height : 3,100 mm * Total weight : 14.300 kg - Tires 10 R 20 - Vehicle available immediately - Hnodpfsxgldlex Akrju * Regularly serviced - German vehicle - From 1st hand - * Engine manufacturer : Deutz Type : F4L913 with 78 KW / 106 PS * PICK-UP PRICE - TAKE IT AS IS - WITHOUT TÜV - WITHOUT LICENSE PLATE - * For viewing please make an appointment * Contact person : Mr. Andreas Vogel * The information provided on the Internet is a non-binding description. * They do not represent warranted characteristics. * The seller is not liable for typing or data transmission errors. * Subject to alterations, errors and prior sale.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, pressing force: 120 t, ram plate length: 4,300 mm, Equipment: CE marking, SAFAN 120-ton, 4300mm CNC Edge Press/Folding Machine Hnodoz It Sqspfx Akreu Used bending machine / press / edge press Brand: SAFAN Model: [Model number missing in the original text] Year: 2002 Press force: 120 tons Bending length: 4300mm CNC control with touchscreen Front supports Operating manual Electrical and hydraulic diagrams Rear safety gate Side safety gates

Condition: ready for operation (used), Year of construction: 1981, operating hours: 376 h, functionality: fully functional, machine/vehicle number: 01031, table width: 570 mm, table length: 670 mm, overall weight: 10,000 kg, clamping force: 400 kN, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item within the period of November 16, 2026, and November 26, 2026! TECHNICAL DETAILS Closing force: 400 kN Table dimensions: 670 × 570 m MACHINE DETAILS Operating voltage: 380/260 V Frequency: 50 Hz Rated current: 25 A Power: 7.5 kW Dimensions & Weight Dimensions (L x W x H): 2,500 x 1,900 x 3,200 mm Weight: 10,000 kg Hnedjz Iluqjpfx Akrou Recorded operating hours: 376 h External reference: Alesco - Lot 76

Condition: good (used), Year of construction: 2004, fuel type: hybrid, NIFTYLIFT Nifty HR12NDE Articulating Boom Lift / Mobile Elevated Work Platform HYBRID Kubota Diesel 4x2 2004 Batteries are in poor condition. Hjdpfx Akez Sryierenu A video can be sent via WhatsApp. We have a continuous stock; see our website. Prices are quoted ex Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition without any guarantees (see our general terms and conditions). You can make a non-binding appointment for a viewing and/or test drive. Please call beforehand, as we are not always on-site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: used, Year of construction: 1995, max. weight 60 kg; Hnjdpfx Akez R Dlhersu min. weight 0,4 kg.

Condition: used, HolzHer 7023 K CNC machining center Year of manufacture: 2008 Power supply: 3 x 400 V Traversing system (beams and suction cups) with 6 beams, Tool magazine for 12 positions, 3-axis milling motor, Drilling head, Hedpfez Nh Tgjx Akrsnu Horizontal milling motor (for doors).

Condition: good (used), Year of construction: 1997, functionality: fully functional, 4-AXIS CNC MACHINE FROM A PART-TIME JOINERY, VERY GOOD CONDITION Workpiece dimensions max.: Length 3,000 mm Width 1,050 mm Thickness 60 mm with standard clamps 120 mm with clamping templates (customer-supplied) 2 clamping stations for machining 2 identical workpieces, resulting in halved changeover times 6 clamping consoles with tubeless vacuum guidance 12 vacuum suction cups Machine zero point at the front left Chip conveyor belt Main spindle 7.5 kW, HSK 63 F S1 incl. stepless speed control 1,500 - 18,000 RPM C-axis for main spindle Tool changer magazine, 12-position, mounted on the support and moving with the X-axis Drilling head, 17 spindles, vertical, 7,500 RPM Spindle spacing 32 mm Drilling head, horizontal, 4 spindles Control system: ----- HOMATIC NC 83 Operating system OS-9 with WINDOWS interface WOODWOP 4.5 Connection values: 380 V / 50 Hz Control voltage: 220 V 50 Hz Additional accessories: ----- Anti-slip mats in front of the machine Adapter unit for saw with 2 outlets Maintenance performed: Hnjdoz H Na Ijpfx Akrou - Main spindle completely overhauled in 2019, since then max. 100 hours of use - X-axis bearings completely new - Water hoses partially replaced - New vacuum pump Becker - Cooling unit for main spindle new

Condition: good (used), Year of construction: 1986, machine/vehicle number: 231, Offer 26237 Hsdpfx Akjz Ixwxjrjnu Technical specifications: - Cutting length up to 200 mm - Cutting thickness: - Steel with 400 N/mm² tensile strength: 6 mm - Stainless steel with 600 N/mm² tensile strength: 4 mm - Infinitely adjustable cutting angle via handwheel: 30 - 120° - Pneumatically clamped - Automatic adjustment of cutting gap: 300 mm - Table surface area: 1000 x 800 mm - Table with T-slots and depth stops - Table height: approx. 900 mm - Depth stops - Drive: 400 V / 4 kW - E – foot switch - Space requirement: approx. W 1000 x H 1350 x D 1510 mm - Weight: approx. 1800 kg

Condition: good (used), Year of construction: 2011, fuel type: hybrid, Nifty Niftylift HR12NDE Articulating Boom Lift / Working Platform HYBRID Kubota Diesel 4x2 2011 A video can be sent via WhatsApp. Hnjdpoz Sryvofx Akrju We have a continuous stock; see our website. Prices are quoted ex Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition without warranties (see our general terms and conditions). You can make a non-binding appointment for a viewing and/or test drive. Please call beforehand, as we are not always on site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: used, Year of construction: 1991, Overview H&K (Holstein und Kappert) SVF 120-D rotary can filler, built in 1991, with 120 filling valves for can format 211/202. Rated output is approx. 80,000 cans per hour with standard 330 ml cans. The filler is supplied together with an Angelus 121 L can seamer from 1991, the rinser that ran with it, and the filler platform. It is controlled by a Siemens S7-400 PLC. The machine is already dismantled and ready for loading. Technical data - Manufacturer: H&K (Holstein und Kappert) - Model: SVF 120-D - Year of manufacture: 1991 - Machine type: rotary can filler - Filling valves: 120 - Can format: 211/202 - Output: approx. 80,000 cans/h (330 ml) - Power supply: 380 V, 50 Hz, 3/N - Rated current: 24 A - Control voltage: 24 V DC - PLC: Siemens S7-400 (CPU 416-2) Scope of delivery Hnedpjz Eivyefx Akrsu - Can filler SVF 120-D with 120 filling valves and can lift cylinders - Can seamer: Angelus 121 L (202), year 1991 - Can rinser operated together with this filler - Filler platform with railings - Yellow H&K control cabinets with Siemens S7-400 PLC and I/O racks - Backup of the Siemens PLC program on USB stick - Documentation: H&K operating manual and spare parts list (French), electrical diagrams, Angelus 121 L parts list and service manual Condition Used, sold as is. The machine is already dismantled and stored in Germany. Loading onto the buyer's trucks is included. Transport requires two trucks: one for the filler carousel and one for the remaining machine parts and components. Availability Immediately.

Condition: excellent (used), functionality: fully functional, mileage: 750,000 km, first registration: 11/2007, fuel type: diesel, brakes: engine braking, emission class: euro3, Year of construction: 2007, Equipment: ABS, airbag, Mercedes-Benz Actros 4144 K truck Three-way tipper body Manual cover/tarp system Hedoz Suddepfx Akrenu Year: 10/2007 Four-axle (8x4) construction vehicle ZF 16-speed manual transmission Euro 3 emission standard Engine displacement: 11,946 cc (6 cylinders) Power output: 320 kW (435 hp) Mechanical leaf spring suspension Air conditioning ABS Engine brake Radio Electric mirrors and windows Mileage: 750,000 km