Used Steinbock Boss Je 13-70 for sale (21,521)

Condition: like new (used), Steinbock Boss JE 13-70 (year 1993) Fodjy Naflepfx Ad Nsgb

Condition: repair required (used), functionality: limited functionality, Year of construction: 1992, Equipment: pallet forks, STEINBOCK BOSS 2t forklift. Presumed defective injection nozzles. Fedpfxsy N R Haj Ad Negb

Condition: used, functionality: fully functional, Year of construction: 1990, load capacity: 6,000 kg, lifting height: 4,000 mm, fuel type: diesel, motor manufacturer: Perkins, Equipment: cabin, Sideloader Fgodpfx Adjy Eqb Ho Nsb

Condition: used, 5.000 kg Fsdoxpvr Eepfx Ad Nsgb Lifting height 3.300 mm engine Diesel Fork length 1.200 mm Number of working hours ca. 2.003 h Steinbock Boss Type 556/MK5B-3 side loader for efficient transport and stacking of long goods, pallets, and wood materials in confined storage and production areas. The robust design enables safe handling even with heavy loads. Ideal for sawmills, timber merchants, and industrial manufacturing. Load center: 600 mm Steering: hydraulic

Condition: used, operating hours: 9,600 h, load capacity: 12,000 kg, fuel type: diesel, Due to the large number of unserious emails / Emails will not be answered WhatsApp Fgjdpexz Uvgefx Ad Neb Perkins engine 7 x new tires "SUBJECT TO ERRORS, TYPOGRAPHICAL ERRORS, AND PRIOR SALE"

Condition: used, CTS Type: TS -70/600-13 Temperature test chamber, water-cooled Type series: TS -70/600-13 Control system: - 32 bit controller - LCD control panel Fodovcyawepfx Ad Njgb - Digital display of setpoints and actual values - Numerical input of setpoint values - Error messages in plain text - RS 232 interface - Free switching channels for on-site test material control Test chamber volume: 600 liters Test chamber dimensions: Height approx. 730 mm, width approx. 850 mm, depth approx. 830 mm External dimensions: Height approx. 2250 mm, width approx. 1300 mm, depth approx. 2475 mm Temperature range: -70 to +180°C Heating speed: 13 K/min at -40°C to +120°C Cooling speed: 13 K/min at 120°C to -40°C Temperature deviation: ± 0.1K temporal, ± 0.5 K spatial Electrical connection 400/3P/N/PE Nominal power: approx. 27.8 kW Nominal current: approx. 44.1 A Compressor: 4TC-8.2Y/4PC-10.2Y Refrigerant: R-404 A / R-23 Weight: 1350 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, total length: 1,280 mm, total width: 390 mm, total height: 40 mm, 120 pcs. Shelves approx. 128 x 39 x 4 cm , SSI Schäfer R3000 , II. choice (new) Shelving racks Workshop shelving , Storage racks , Manual storage , Push-in shelving , Small parts storage B40/392/70 , ZB341315 , ZB9414 Data : - Length: approx. 128.1 cm - Width: approx. 39 cm - Height: approx. 4 cm - Scope: 120 pcs. Shelves SSI Schäfer R3000 - Load : max. 100 kg per shelf - Surface : sendzimir galvanized - II. CHOICE (NEW GOODS)(This is a II. Wahl product, new and unused.II. Choice means there may be dust deposits, minimal scratches or soiling). - ex warehouse Wietmarschen Price : 960,00 € net 1142,40 € gross You will receive an invoice with VAT shown. Fgedpey Ri Swofx Ad Neb Transportation : The delivery is carried out on request by our partner forwarding agency, the costs depend on the postal code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, total length: 1,310 mm, total width: 390 mm, total height: 40 mm, 120 pcs. Shelves approx. 131 x 39 x 4 cm , SSI Schäfer R3000 , II. choice (new) Shelving racks Workshop shelving , Storage racks , Manual storage , Push-in shelving , Small parts storage B40/392/70 , ZB341315 , ZB9414 Fgodpfx Adjy Ri Sde Neb Data : - Length: approx. 131.2 cm - Width: approx. 39 cm - Height: approx. 4 cm - Scope: 120 pcs. Shelves SSI Schäfer R3000 - Load : max. 100 kg per shelf - Surface : sendzimir galvanized - II. CHOICE (NEW GOODS)(This is a II. Wahl product, new and unused.II. Choice means there may be dust deposits, minimal scratches or soiling). - ex warehouse Wietmarschen Price : 960,00 € net 1142,40 € gross You will receive an invoice with VAT shown. Transportation : The delivery is carried out on request by our partner forwarding agency, the costs depend on the postal code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, machine/vehicle number: F 36905, travel distance X-axis: 7,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,300 mm, spindle speed (max.): 2,000 rpm, controller model: HEIDENHAIN TNC 360, The protocol of the geometric acceptance is attached! TECHNICAL DETAILS X-axis travel: 7,000 mm Y-axis travel: 1,200 mm Z-axis travel: 1,300 mm Rapid traverse x/y/z: 10 m/min Table size: 8,000 x 1,300 mm Table load capacity: max. 4 t/sq.m Universal head: 5x90 plus manual 1 Fgedjy Rrbhspfx Ad Neb Tool holder: SK 50 Milling spindle speed range: 20 - 2,000 rpm Drive power: 30 kW Spindle torque: 2-speed gearbox, 750 Nm MACHINE DETAILS Control system: HEIDENHAIN TNC 360 Total power requirement: 50 kW Dimensions & Weight Installation space approx.: 9.0 x 3.8 x 4.6 m Machine weight approx.: 25 t EQUIPMENT Orthogonal milling head, water-cooled 3D wireless probe M&H 20.41 Partition wall for parallel operation/setup Internal air blast Internal coolant supply 15 bar Adapter for high-speed milling spindles with torque support Travelling operator platform Chip conveyor Electronic handwheel HR 410 Monitored safety fences Various optional accessories (angular milling heads, clamps, etc.)

Condition: ready for operation (used), Schmalenberger ZHT4 32-13/2-7.5 submersible pump SN:9700005166/1, used, normal signs of wear, 100% functional, scope of delivery as per photos, ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Fodpfx Adoi D Nvcj Nogb

Condition: excellent (used), CTS Temperature Shock Test Chamber TSS-70/350-A Device Data Manufacturer: CTS GmbH Model: TSS-70/350-A Year of manufacture: 10/2017 Version: Temperature Shock Test Chamber Cooling unit: Water-cooled Description Used temperature shock test chamber by CTS. Suitable for shock and temperature cycling tests. For use in industry, research, and quality assurance. Areas of Application - Material testing - Aging tests - Electronics and component testing - Temperature shock tests - Automotive and QA Temperature Ranges Hot chamber: +50 °C to +220 °C Cold chamber: -70 °C to +100 °C Electrical Data 400 V / 3/N / 50 Hz Power: 19.8 kW Current: 46.5 A Connection: CEE 63A Refrigeration System Precooling: R452A, 7.2 kg Cooling stage: R23, 2.8 kg CO₂ equivalent: 15.41 t / 41.59 t Water-cooled Pressure / Protection PS: 25 bar PT: 27.5 bar IP 54 Features - Touchscreen control - Microprocessor controller - Programmable operation - Digital setpoint/actual display - 2-zone system - Transfer cart for rapid specimen transfer - Viewing window - Integrated control cabinet - Cooling water connections Technical Construction - Separate hot and cold chambers - Stainless steel test space - Industrial-grade construction Dimensions External: 2335 x 940 x 1820 mm Handling dimensions: 1990 x 940 x 1652 mm Internal: 410 x 480 x 660 mm Weight Approx. 950 kg Documentation - Declaration of conformity - Test certificates - Operating manual - Circuit and piping diagram - Spare parts list Service before delivery (optional) - Functional check - Refrigerant service - Leak test - Test run with log Fgedey H Hk Aepfx Ad Njb Condition Used. Cosmetic condition as shown in photos. Scope of Delivery - Test chamber TSS-70/350-A - Documentation (where available) Note Used machine, sale without warranty. Inspection can be arranged upon request. Loading and transport can be organized if required. Subject to prior sale and technical modifications. For any questions, please feel free to contact us.

Condition: used, mileage: 190,447 km, power: 112 kW (152.28 HP), first registration: 10/2000, fuel type: diesel, overall weight: 7,490 kg, Equipment: crane, Well-maintained Mercedes Atego 815 equipped with a Palfinger PK 7000 crane featuring radio remote control, 2 hydraulic and 2 mechanical extensions, and a maximum working height of 13 m. German vehicle, single owner. Palfinger PK 7000 specifications: Working height: 13 m Max. lifting capacity: 2,960 kg Lateral outreach: 1.80 m – 2,960 kg 3.40 m – 1,790 kg 5.10 m – 1,160 kg 6.90 m – 870 kg 2 mechanical extensions: 8.90 m – 600 kg 10.90 m – 370 kg Radio remote control Flatbed dimensions: Length 4,200 mm, Width 2,450 mm Payload at 7,490 kg GVW: 1,970 kg Payload at 8,600 kg GVW: 3,080 kg Rockinger trailer coupling Towing capacity: 10,500 kg Auxiliary heater German vehicle Fsdpox Rtfhsfx Ad Njgb Single owner Differential lock Radio Roof hatch Financing options available through our partner banks; we are happy to assist you. Please note that the vehicle is also advertised on other platforms, and we reserve the right to prior sale. All accessory specifications are provided without guarantee. Subject to changes, prior sale, or errors. We strongly recommend and offer viewing and inspection, so that you can assess the vehicle's condition and suitability. Viewing and inspection are possible at any time by appointment and are expressly encouraged.

Condition: excellent (used), CTS Type: TSS-70/350-A Water-cooled refrigeration unit For sale is a high-quality temperature shock test chamber from CTS (Clima Temperatur Systeme), model TSS-70/350-A. This unit is designed for performing thermal shock tests and is typically used in industry, research, and quality assurance. Typical applications: - Material testing - Aging tests - Electronics and component testing - Thermal shock and temperature cycling tests Technical specifications: Type: TSS-70/350-A Temperature range: Warm chamber: +50°C to +200°C Cold chamber: -70°C to +100°C Electrical data: Connection: 400 V, 3/N, 50 Hz Rated power: approx. 20.4 kW Rated current: approx. 36.5 A Refrigeration system: Refrigerant: R404A / R23 Precooling stage: approx. 6.0 kg Cooling stage: approx. 3.0 kg Water-cooled Features / Equipment: - CTS control panel with touch display - Microprocessor-controlled regulation and monitoring system - Program operation - Digital setpoint and actual value display - 2-zone system (warm and cold chamber) - Automatic transfer basket for shock tests Fgedsy Hkgbopfx Ad Nsb Technical design: - Warm and cold chamber separated - Transfer basket system for rapid temperature change - Test chamber made of stainless steel - Insert shelf / wire rack - Viewing window in door - Water cooling connections available - Integrated control cabinet Dimensions: External dimensions (HxWxD): approx. 2335 x 940 x 1820 mm Installation dimensions (HxWxD): approx. 1990 x 940 x 1652 mm Internal dimensions (HxWxD): approx. 410 x 480 x 660 mm Weight: approx. 950 kg Additional data: Protection class: IP 54 Operating overpressure: approx. 25 bar Test pressure: approx. 27.5 bar For your safety as a buyer, please note the following information! The following points are carried out on the chambers we offer before sale: 1. Functional check and replacement of necessary components 2. If needed, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run Condition: used Scope of delivery: see pictures (Specifications subject to change and errors excepted!) We are happy to answer any further questions by phone.

Condition: excellent (used), CTS Type: TSS-70/130 Water-cooled chiller unit For sale is a high-quality thermal shock test chamber manufactured by CTS (Clima Temperatur Systeme), model TSS-70/130. This device is designed for thermal shock testing and is commonly used in industry, research, and quality assurance. Application fields: - Material testing - Aging tests - Electronics and component testing - Thermal shock and temperature cycling tests Technical specifications: Type: TSS-70/130 Test volume: 130 liters Temperature range: - Hot chamber: +50°C to +200°C - Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from room temperature to +180°C Cooling rate: approx. 4 K/min from room temperature to -60°C Temperature deviation: ±1 K over time ±2 K spatially Temperature change rate: Max. 100 K/min on average for shock test cycles (without radiant heat) Transfer rate: ≤ 15 min in the range -65°C to +200°C with 10 kg ICs Transfer time: < 10 seconds Electrical data: Connection: 400 V, 3/N, 50 Hz Nominal power: approx. 16.7 kW Nominal current: approx. 26.8 A Site-side fuse: 32 A slow-blow Connection: Cekon 32 Cooling system: Refrigerant: R404A / R23 Fgsdpfoy Hkfdex Ad Njb Water-cooled, low noise, fully hermetic Features and equipment: - CTS control panel - Microprocessor-controlled regulation and monitoring system - Program operation (up to 100 test programs) - Digital setpoint/actual value display - RS232 interface - 2 free switching channels for controlling test objects on-site - Fault alarm with floating contact (rated for up to 30 V-DC, 2 A) - EMC tested Technical design: - Hot and cold chambers - Transport basket with spindle drive - Test chamber / basket made of stainless steel, Material no. 1.4301 - Insert basket made of stainless steel wire - Pipe duct NW 50 with closing plug - Compressed air connection 1/4" male - Pressureless condensate drain R 1/2" internal thread - Safety door lock - Lockable door with window Dimensions as per installation drawing: External dimensions approx.: 2335 x 940 x 1820 mm Entry dimensions approx.: 1990 x 940 x 1652 mm Test chamber dimensions: Height approx. 410 mm, Width approx. 480 mm, Depth approx. 660 mm Window: 300 x 300 mm Further data: Degree of protection: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average power consumption per test cycle: approx. 8 kWh For your assurance as a buyer, the following procedures are performed on all offered chambers beforehand: 1. Function check and replacement of necessary components 2. If required, recharge with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented trial run Condition: used Scope of delivery: see pictures (Specifications subject to change and errors excepted!) If you have further questions, we are happy to assist you by phone.

Condition: excellent (used), CTS Type: TSS-70/130 Water-cooled refrigeration unit Fgodey Hkd Hopfx Ad Nob For sale is a high-quality thermal shock test chamber by CTS (Clima Temperatur Systeme), model TSS-70/130. This device is designed for performing thermal shock tests and is typically used in industry, research, and quality assurance. Application Areas: - Material testing - Aging tests - Electronics and component testing - Thermal shock and temperature cycling tests Technical Specifications: Type: TSS-70/130 Test volume: 130 liters Temperature range: - Hot chamber: +50°C to +200°C - Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from ambient temperature to +180°C Cooling rate: approx. 4 K/min from ambient temperature to -60°C Temperature deviation: - ±1 K over time - ±2 K spatially Temperature change rate: - max. 100 K/min average for shock test mode (no radiant heat) Transfer time between chambers: - ≤ 15 min for -65°C to +200°C with 10 kg ICs Changeover time: - < 10 seconds Electrical Specifications: Connection: 400 V, 3/N, 50 Hz Nominal power: approx. 17.2 kW Nominal current: approx. 29 A Site fuse: 32 A slow-blow Connection: Cekon 32 Refrigeration System: Refrigerant: R404A / R23 Water-cooled, low noise, fully hermetic Features/Equipment: - CTS control panel - Microprocessor-controlled regulation and monitoring system - Programmable operation (up to 100 test programs) - Digital setpoint and actual value display - RS232 interface - 2 free switching channels for external device control - Fault notification via volt-free contact (Loadable up to 30 V DC, 2 A) - EMC tested Technical Construction: - Hot and cold chambers - Transfer basket with spindle drive - Test chamber/transfer basket made of stainless steel (material no. 1.4301) - Stainless steel wire insert basket - Tube port NW 50 with sealing plug - Compressed air connection 1/4" male - Non-pressurized condensate drain R 1/2" female thread - Safety door locking - Lockable door with window Dimensions (according to installation diagram): External dimensions approx.: 2335 x 940 x 1820 mm Installation clearance approx.: 1990 x 940 x 1652 mm Test chamber internal dimensions: height approx. 410 mm, width approx. 480 mm, depth approx. 660 mm Window: 300 x 300 mm Additional Data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average consumption during test cycle: approx. 8 kWh Important information for your safety as a buyer! The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Condition: used Scope of delivery: see photos (Specifications subject to change and errors excepted.) For further questions, please feel free to contact us by phone.

Condition: new, Technical data: Working width mm: 1,350 Min./max. working height mm: 4 - 170 Sanding belt width/length mm: 1,370/2,620 Main motor power kW: 18.5 with inverter Feed speed variable m/min: 3.5 - 18 Working units: 1st unit: "RA" skew-grooved contact roller, Sh 86, diameter 160 mm 2nd unit: Combination: Rubber-coated sanding roller diameter 160 mm, 45 Sh Elastic electronic segmented sanding pad “MESAR” with 24 segments Version C: - Elastic electronic segmented sanding pad “MESAR” complete with: - Pneumatic cylinder (on/off) for automatic engagement/disengagement of the sanding roller sanding pad unit - Activation of segments via electronic control, which synchronizes their operation with feed speed and manages the number of active segments based on the workpiece geometry, allowing selection of more or fewer segments to the left or right of the workpiece. Versions 135: “MESAR 24” with 24 segments, segment width 55 mm, complete with B/24 workpiece scanning bar at infeed Additional equipment: Roller table at infeed and outfeed for long workpieces Perforated table and conveyor belt Vacuum table with 4 kW (5.5 HP) electric fan integrated into machine frame Oscillating blow-off device, 2nd unit Touch screen 10.4” display with ‘eye S’ software integration Fedpshtuvrefx Ad Nsgb NOTE: IMAGES ARE SAMPLE PHOTOS OF A SIMILAR SD70!

Condition: excellent (used), Year of construction: 2022, operating hours: 1,254 h, machine/vehicle number: 50803583844694, load capacity: 272 kg, overall weight: 21,090 kg, product width (max.): 2,490 mm, working height: 43,150 mm, enginetype: Diesel, manufacturer: Genie Fsdpfxow Snzfs Ad Njgb

Condition: good (used), Year of construction: 2021, fuel type: diesel, Weights Empty weight: 21.031 kg Functional Mast: articulated arm Lifting capacity: 272 kg Working height: 4.230 cm CE mark: yes Condition Technical condition: good Visual appearance: good Other information Fedpfxsyyah Is Ad Negb Delivery terms: EXW Max. horizontal reach: 2197 m Max swing of platform in degrees: 360 Transport dimensions (LxWxH): 12,92x3,15 Production country: US Additional information Please contact Christian Theißen for more information Manufacturer: Genie Model: ZX-135/70 Year of build: 2021 Condition: Used Data: Max. working height: 42,30 m Movable up to working height: 42,30 m Platform height: 40,30 m Max. reach: 21,97 m Platform lifting capacity: 272 kg Platform dimensions LxW: 2,44 x 1,21 m Total dimensions LxWxH: 12,92 x 3,94 x 3,15 m Transport position LxH: 12,92 x 3,15 m Width: 2,51 m Track widening: 3,94 m Swivel range: 360°, Endless Gradeability: 45 % Ground clearance: 0,38 m Drive type: Diesel Empty weight: 21.031 kg Special features: Rotatable work basket, basket arm/rotation angle 160°, hydraulic, all-wheel drive, pendulum axle, particulate filter, socket in the basket.

Condition: excellent (used), Suspension clamp, helmet rail holder, helmet rail, running rail, rail holder Fedswca D Iopfx Ad Njgb -Manufacturer: Helm, suspension clamp, rail holder, galvanized yellow -Type: 1508 -Dimensions: see photos -Quantity: 64 pieces available Price: per set -Dimensions: 90/70/H135 mm -Weight: 1.3 kg/set

Condition: used, functionality: fully functional, Year of construction: 2019, machine/vehicle number: 2474258, power: 40.45 kW (55.00 HP), load capacity: 272 kg, lifting height: 41,150 mm, platform length: 2,440 mm, platform width: 1,830 mm, overall weight: 21,092 kg, transport length: 12,930 mm, transport width: 2,490 mm, transport height: 3,090 mm, fuel type: diesel, color: blue, Equipment: UVV, all wheel drive, Technical Specifications - Year of manufacture: 2019 - Drive: Diesel 4WD - Working height: 43.15 m Fsdpfx Adoyqyk No Nogb - Platform height: 41.15 m - Lateral outreach: 21.26 m - Load capacity: 272 kg - Platform dimensions (LxW): 12.93 x 2.49 m - Total weight: 21,092 kg - UVV (accident prevention inspection): new All-wheel drive, very large outreach, lower and upper boom telescopic, basket arm telescopic, wide work platform, extendable axles, larger setup area, widened work platform, in working condition, general signs of use.

Condition: new, empty load weight: 927 kg, maximum load weight: 2,573 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,600 mm, loading space width: 1,700 mm, loading space height: 960 mm, loading space volume: 6.1 m³, color: silver, construction height: 2,100 mm, working width: 2,300 mm, Automatic reverse drive, hot-dip galvanizing, grid attachment / heavy-duty ramp / extremely robust body / multifunctional use / LED lighting / e-wheel, * IMMEDIATELY AVAILABLE * incl. Grid attachment / Heavy-duty ramp / Extremely robust body / Multifunctional use / LED lighting / E-wheel TECHNICAL DATA - Make: Brian James - Model: General Plant - Vehicle type: Construction machinery - Vehicle condition: New vehicle - First registration: Without first registration - TÜV/HU: 2 years from first registration - Internal dimensions (LxWxH): 360 x 170 x 96 cm - External dimensions (LxWxH): 529 x 230 x 210 cm - Loading height of floor: 48 cm - Perm. Total weight: 3,500 kg - Unladen weight: 927 kg - Payload: 2.573 kg - Chassis: Low loader (wheels next to the body) - Tyres: 185/70R13C - Chassis: ALKO rubber suspension axle - Support wheel: Yes - 100 km/h approval: Optional, can be retrofitted DESCRIPTION - Universal all-rounder construction machinery trailer - Unique on the market - Every available option can be flexibly attached or removed and thus enables customization for almost any area of application - Insertion option at all 4 corners for drop sides, tarpaulin frames, side wall extensions or front wall extension - Steel side wall extension - 50% lattice extension + 50% closed side wall, can be removed without tools - Incl. recessed eccentric locks - hard-wearing rubber strip seals the attachment to the dropside at the bottom - vehicle also intended for all options after purchase: enormous potential for retrofitting: hydraulic tipping functions, winches, other ramps, attachments, etc. can be retrofitted at any time - robust steel mudguards with non-slip perforated profile - reinforced 18 mm screen-printed wooden floor, non-slip and waterproof - very sturdy welded steel frame - frame completely hot-dip galvanized - chassis with additional longitudinal beam underneath the loading area - sturdy, sturdy chassis with additional longitudinal beam underneath the loading area - sturdy chassis with additional longitudinal beam underneath the loading area - sturdy chassis with additional longitudinal beam underneath the loading area - sturdy chassis with additional longitudinal beam underneath the loading area.stable ACME locking system: closes silently, loading ramps are held in place by safety clamp locks, rubber buffer dampens noise - heavy-duty perforated steel ramp, galvanized steel, with spring support (heavy-duty) - very low chassis for low drive-on angle - lashing points at the bottom and top of the dropside (1000dAN/kg) TÜV certified - side panels color: black - maintenance-free axles and damping systems designed for long journeys and heavy loads - spare wheel mounted on the dropside for easy access - automatic reverse - ALKO overrun device and parking brake - cast steel coupling head with integrated ALKO high-security lock - very sturdy V-drawbar REINFORCED - 13-pin plug - complete LED lighting system Plug - Complete LED lighting: Extremely bright, durable and reliable. - LED rear lane departure lights - Reversing lights - Integrated rear fog light - Robust rear light protection - Automatic heavy-duty support wheel - 5-year chassis warranty Accessories can be retrofitted - please enquire! - Excavator bucket support - Tipping hydraulics - Lashing straps - Storage box - Winch - and much more New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trai Fedpfx Adou Hrl Dj Nsgb

Condition: new, empty load weight: 828 kg, maximum load weight: 2,672 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,600 mm, loading space width: 1,700 mm, loading space height: 300 mm, loading space volume: 1.8 m³, color: silver, construction height: 2,100 mm, working width: 2,300 mm, Automatic reverse drive, hot-dip galvanizing, heavy-duty ramp / extremely robust body / multifunctional use / LED lighting / e-wheel, * IMMEDIATELY AVAILABLE * incl. Heavy-duty ramp / extremely robust body / multifunctional / LED lighting / e-wheel TECHNICAL DATA - Make: Brian James - Model: General Plant - Vehicle type: Construction machinery - Vehicle condition: New vehicle - First registration: without first registration - TÜV/HU: 2 years from first registration - Internal dimensions (L x W x H): 360 x 170 x 30 cm - External dimensions (L x W x H): 529 x 230 x 210 cm - Loading height of the floor: 48 cm - Perm. Gross vehicle weight: 3,500 kg - Unladen weight: 828 kg - Payload: 2.672 kg - Chassis: Low loader (wheels next to the body) - Tyres: 185/70R13C - Chassis: ALKO rubber spring axle - Support wheel: Yes - 100 km/h approval: Optional, can be retrofitted DESCRIPTION - Universal all-rounder construction machinery trailer - Unique on the market - Every available option can be flexibly attached or removed and thus enables needs-based adaptation for almost any area of application - Insertion option at all 4 corners for drop sides, tarpaulin frames, drop side attachments or front wall elevation - Vehicle also intended for all options after purchase: enormous potential for retrofitting: hydraulic tipping functions, winches, other ramps, attachments, etc. can be retrofitted at any time. can be retrofitted at any time - robust steel mudguards with non-slip perforated profile - reinforced 18 mm screen-printed wooden floor, non-slip and waterproof - very sturdy welded steel frame - frame completely hot-dip galvanized - chassis with additional longitudinal beam under the loading area - sturdy chassis with additional longitudinal beam under the loading area - sturdy chassis with additional longitudinal beam under the loading areastable ACME locking system: closes silently, loading ramps are held in place by safety clamp locks, rubber buffer dampens noise - heavy-duty perforated steel ramp, galvanized steel, with spring support (heavy-duty) - very low chassis for low drive-on angle - lashing points at the bottom and top of the dropside (1000dAN/kg) TÜV certified - side panels color: black - maintenance-free axles and damping systems designed for long journeys and heavy loads - spare wheel mounted on the dropside for easy access - automatic reverse drive - ALKO overrun device and parking brake - cast steel coupling head with integrated ALKO high-security lock - very sturdy V-drawbar REINFORCED - 13-pin plug - complete LED lighting system Plug - Complete LED lighting: Extremely bright, durable and reliable. - LED rear lane departure lights - Reversing lights - Integrated rear fog light - Robust rear light protection - Automatic heavy-duty support wheel - 5-year chassis warranty Accessories can be retrofitted - please enquire! - Excavator bucket support - Tipping hydraulics - Side wall attachments - Lashing straps - Storage box - Winch - and much more New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors Fedpfx Adeu Ht N Ro Nsgb

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 4,234 h, load capacity: 272 kg, lifting height: 43,200 mm, fuel type: diesel, Note: Control cable connector on the upper control panel is defective. Fgedoydu Ebopfx Ad Njb

Condition: used, empty load weight: 18,240 kg, maximum load weight: 45,760 kg, overall weight: 64,000 kg, axle configuration: > 3 axles, first registration: 02/2012, next inspection (TÜV): 01/2024, loading space length: 12,120 mm, loading space width: 2,740 mm, loading space height: 550 mm, tire size: 285/70R19.5, color: red, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 4 axles, SAF axles, forced steering, lifting + lowering, ABS (anti-lock braking system), lashing rings. Body: Low-bed trailer with 3 hydraulically steered axles and jeep dolly. Including a jeep dolly with a 10t SAF axle and 295/80R22.5 tires! At the rear: 3 x 12t SAF axles! Fsdpeyf E E Uefx Ad Njgb Extendable to 3.2m width, 8m low bed platform! With radio and cable remote control, automatic self-alignment. A detailed technical description is available and can be sent by request! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale, and errors!

Condition: used, Year of construction: 2016, operating hours: 2,886 h, machine/vehicle number: ZX135H-3212, fuel type: diesel, Weights Empty weight: 20.604 kg Functional Mast: articulated arm Lifting capacity: 272 kg Working height: 4.315 cm Other information Front tyres / undercarriage remaining: 60 Rear tyres remaining : 60 Tyre brand: Outrigger Fodpfx Adoxz Nygo Njgb Max. horizontal reach: 2126 m Transport dimensions (LxWxH): 12.9x2.5x3.1 Additional information Please contact PFEIFER GROUP for more information