Used Suga Upper Support for sale (14,586)

Condition: good (used), Upper support, upper slide, dovetail guide, cross table -Tool slide: from automatic lathe SUGA type STS-2 -Measurements: see photos -Dimensions: 830/610/H300 mm Psdpfx Aefnxw Teflepw -Weight: 119 kg

Condition: good (used), Upper support, upper slide, dovetail guide, tool slide, cross table, spindle drive for upper support -Spindle drive: for upper support -Trapezoidal spindle: Ø 20 mm -Dimensions: see photos -Dimensions total: 450/155/H110 mm Psdpfx Afsxfzuwslopw -Weight: 5.4 kg

Condition: used, Upper support, upper slide, dovetail guide, tool slide, cross table -Tool slide: from automatic lathe SUGA type STS-2 -Measurements: see photos Ppodpsfnxxfsfx Afljw -Dimensions: 1080/530/H290 mm -Weight: 121 kg

Condition: used, Upper support, upper slide, dovetail guide Peded Ebpmopfx Aflepw -Rezess: Ø mm -Hole circle: Ø mm -Dimensions: 121/295/H200 mm -Weight: 12 kg

Condition: good (used), Upper support Bolt circle diameter 180 mm Depth 230 mm Width 600 mm Ppsdjccrqfepfx Aflsw Height 460 mm

Condition: good (used), Obersupport Pjdpfxob Eyb As Aflspw Masse : L.530 x B.270 x H.350 mm

Condition: good (used), Upper support Ppodsb E Nw Iepfx Aflow Base plate 300 x 320 mm Bolt circle 265 mm in diameter Centering flange 100 mm in diameter Distance from base plate to steel holder: 185 mm

Condition: good (used), Upper support Sled width 145 mm Height 72 mm Bolt circle 180 mm Centering pin diameter 70 mm Contact surface 240 x 220 mm Weight 23 kg Shipping dimensions: Pedpfxjdq Nvij Aflepw L 490 mm W 220 mm H 270 mm

Condition: used, Gear motor, electric motor, three-phase motor, electric gear motor Ppodpfx Afofnln Deljw -Gear motor: from SUGA type STS-2 automatic lathe -Motor: Yaskawa type FELQ-7T -Power: 3.7 kW -Engine speed: 705/1340 rpm -Gearbox: Suga type SGM-1 -Speed switchable gear 16 stages: 145 -1600 rpm -Shaft: Ø 30 x 80 mm -Dimensions: 945/360/H480 mm -Weight: 233 kg

Condition: used, Hydraulic power pack, hydraulic pump, hydraulic pump -Hydraulic unit: from automatic lathe SUGA type STS-2 -Manufacturer: Nachi Model VD 11B-25-25-AL -Motor: Toshiba type IK/FCKL3-I -Power: 1.5 kW/1400 rpm -Max. Pressure: 19.6 bar Podjfnqhijpfx Aflspw -Liter output: 25 l/min -Dimensions: 570/390/H250 mm -Weight: 51 kg

Year of construction: 2022, condition: used, functionality: fully functional, Single-Use Support Ultra-Freezer RoSS.FRDG Temperature range: +10° to -80°C Capacity: up to 300L Shelf system for 20L Meissner containers included Highest storage density for frozen biopharmaceuticals Easy installation and loading with frozen active ingredients Net weight: 600 kg Currently, up to 5 units are available for sale. Podpfx Aezhuuvjflepw The units are currently out of service and stored. The new price per unit was >40,000 EUR.

Year of construction: 2023, condition: new, functionality: fully functional, This machine, type KM13, cuts electrical cables from 20 to 120 mm in diameter. The different diameters are easily adjusted by turning the hand wheel up and down. The machine has a speed of 25 mtr/min. The dimensions are: length 600 mm, width 600 mm and height 1600 mm. The weight of this machine is about 200 kg. This machine is powered by a 380V-50HZ, 3KW electric motor with a gearbox cabinet. The cable is cut from 2 sides so the copper core falls out easily. Spare parts such as blades, drive, bearings etc can also be supplied. If required we can also perform maintenance on these machines A machine that is ready to use and easy to operate. Ppedpfx Ajq E Ti Hoflow If you want to try it, please bring cable.

Condition: used, Type : Stirrer / Dissolver Ppedpfx Afsx R Ayholow Wall support: manual Previous use: paint Stirring mechanism: dispersing tool Stirring head diameter: 200 mm Stirring shaft length: 950 mm Up/down travel: 950 mm

Condition: excellent (used), Year of construction: 2013, AMADA MODEL GS 11 840 8 mm x 4050 HYDRAULIC year 2013 PROGRAMMABLE CNC SHEAR STAINLESS STEEL CAPACITY 6mm ALUMINIUM CAPACITY 10 mm CUTTING LENGTH 4050MM POWER BACK GAUGE 1000MM PNEUMATIC SHEET SUPPORTS SIDE GUAGE 1.5 METRE SERIAL NUMBER HOLD DOWN HYDRAULIC BLADE GAP ADJUSTMENT STANDARD VARIABLE RAKE STANDARD Pedpfxoyr H U De Afljpw SHADOW LINE LIGHT STANDARD CENTRALISED LUBRICATION STANDARD SHADOW LINE LIGHT STANDARD STROKE COUNTER STANDARD ADJUSTABLE STROKE STANDARD MOTOR 16 KW WEIGHT 11650KG

Condition: excellent (used), Year of construction: 1998, AMADA MODEL GPN 630 HYDRAULIC SHEAR PNEUMATIC REA SHEET SUPPORTS ELECTRONIC REAR SAFETY GUARD Max. cutting width: 3050 mm Max. cutting capacity for steel: 0.4 - 6.0 mm Max. cutting capacity for stainless steel: 4.0 mm Max. cutting capacity for aluminium: 8.0 mm Adjustable back gauge: 1050 mm NC control Psdpfsyypb Rox Aflopw Cutting gap adjustment via control Cutting angle adjustment via control: 0.4 – 2.2° Sheet holding function Strokes per minute: 33 cuts Motor power: 5.5 kW Dimensions (L x W x H): approx. 3800 x 2300 x 1950 mm Weight: approx. 6.5 tons STANDARD EQUIPMENT PROGRAMMABLE MOTORISED BACK GAUGE 2.0 METRE SIDE GAUGE 1.5 METRE FRONT SUPPORTS SHADOW LINE LIGHT AUTOMATIC HYDRAULIC HOLD DOWN CLAMPS CENTRALISED LUBRICATION FOOTSWITCH SHADOW LIGHT BEAM CYCLE COUNTER BLADE GAP AND RAKE ANGLE ADJUSTMENT ONE SET OF BLADES 4 CUTTING EDGES ADJUSTABLE STROKE PNEUMATIC SHEET SUPPORTS HOUR COUNTER AUTO-DIAGNOSTICS

Year of construction: 2024, condition: as good as new (ex-display), Rolleri C-UP-1500 EVO support bar cleaner for cleaning support plates on flatbed laser systems Milling cutter with pneumatic traction device for bridge width 3 and 4 mm Handle length 2000 mm Ppedjwtqqyjpfx Aflsw for laser systems with 2000 mm working width Demonstration unit

Condition: good (used), Support rail for press brake, bending machine, guillotine shear, stop rail, clamping rail Podpfx Afoznkrwsljpw -Support rail: for profile steel shears, flat steel shears -Receptacles: Ø 42 mm -Hole spacing: 550 mm -Dimensions: 690/200/H290 mm -Weight: 10.1 kg

Condition: used, Swing bending machine with additional segmented upper tool, gooseneck rail. Swing bending press brake FASTI type 2095-25-2.5, serial no. 94 295 004, year of manufacture 1994. Working length 2540 mm, max. sheet thickness 2.5 mm, upper beam stroke 380 mm, bending beam motor power 2.2 kW, power supply 400 Volt, 50 Hz. - NC control FASTImatic FM100 - one-piece sharp rail 135° - additional segmented upper tool, gooseneck rail - controlled backgauge - continuous stop rail - controlled bending angle via control - electric foot switches. Weight 3000 kg. In good condition. Ppsdottc Uajpfx Aflew

Condition: as good as new (ex-display), Year of construction: 2026, 190L Sandblasting Cabinet The 190L sandblasting cabinet is designed for efficient sandblasting and cleaning of a wide range of surfaces. Its robust construction and modern technical features make it ideal for use in industrial environments, automotive workshops, and restoration projects. One of its key features is the large front-opening door, which provides easy access to the working chamber. Pedpfjzp Efuex Afljpw The 190L sandblasting cabinet is equipped with a sandblasting gun featuring a compressed air control valve integrated into the handle, allowing the operator to adjust the blasting force according to the type of surface being treated. This is particularly important when working with delicate or demanding materials. The ergonomic work chamber with integrated lighting ensures comfortable and safe operation, even during extended use. Ideal for sandblasting: Wheels and rims Brake calipers Caliper brackets Engine components Frames Housings Tanks Metal parts for cars and motorcycles Rust, dirt, and paint coatings And many other applications The durable steel construction ensures long service life and excellent stability during intensive operation while providing resistance to demanding working conditions. Easy operation and intuitive controls allow even less experienced users to take full advantage of the machine's capabilities. Thanks to these features, the 190L sandblasting cabinet is an indispensable tool for anyone requiring an effective and reliable solution for surface cleaning and sandblasting. Technical Specifications Parameter Value Power Supply 230 V Weight 43 kg Overall Dimensions 1130 × 540 × 885 mm Internal Chamber Dimensions 800 × 500 mm Dust Extraction Port Diameter Ø 63 mm Standard Equipment Sandblasting gun with control valve LED working chamber lighting Transparent viewing window Integrated protective gloves Dust extraction hose Cyclone separator attachment (for dust and abrasive media separation) Please note: The machine requires self-assembly. The listed price is NET (VAT excluded). Shipping costs are not included. IMPORTANT!!! Ex-display machine – last unit available! NO WARRANTY.

Condition: used, Equalising block for low-bed semi-trailer Ppsdpfx Afezn H Etelow Dimensions – see photos ##### PLEASE CALL – NO EMAILS! #####

Condition: used, Roller support for saw, composed of: 2 supports: L 3000 mm x Max width 550 mm x Mini height 800 mm - Max height 950 mm 1 support fitted on machine side (see photo): L 3000 mm x Max width 550 mm x Mini height 800 mm - Max height 950 mm Ppsdpfxozmxvue Afljw Rolls width: 450 mm

Condition: used, 2 Cast iron V supports Width: 1400 mm Height: 1370 mm Base depth: 750 mm Slot width: 200 mm V width: 940 mm V depth: 430 mm Total height under sole: 1470 mm Weight: 2,3 T / unit Ppjdpfxszmw Ucs Aflew Ideal for positioning large rotors

Condition: used, Various supports for the WEILER 260. Ppjdpfx Afszmxdxslew

Condition: new, “Partially unpacked for photography – unused item from warehouse clearance.” Quantity: 3 available System support for SLS-line A3-A6 B00978-04-02 Ppedpfxjzi Dyks Aflew LEONI

Condition: like new (used), functionality: fully functional, Ferwood Code: RS0003189 – Manufacturer Code: – Condition: As new (display item) – Functionality: Fully functional – If interested, we offer an overhaul service. Please contact us. Ppjdpfx Ajwtz Hreflsw