Used Sumitomi (Shi) Demag Extra 35-80 for sale (31,994)

Condition: excellent (used), Year of construction: 2007, clamping force: 350 kN, screw diameter: 22 mm, clearance between the columns: 280 mm, injection pressure: 2,061 bar, injection weight: 37 g, ejector stroke: 100 mm, Clamping force: 35t Year of manufacture: 2007 Injection weight: 37g Dedpfjzt Itcex Akmsku Injection unit 80 Screw diameter: 22 mm Specific injection pressure: 2061 bar Injection volume: 42 ccm Injection weight: 37 g Screw L/D ratio: 20 Tool closing system 35 Clamping force: 35 t Tool plate dimensions: 390x390 mm Distance between columns: 280x280 mm Ejector force: 26 kN Ejector stroke: 100 mm Weight: 2200 kg Control system: MC4 Equipment: - Hydraulic core - Pneumatic valve

Year of construction: 2004, condition: used, Clamping force: 800kN, tie-bar spacing: 400mm, injection unit: 430, max. flow rate: 76l/min, max. hydraulic pressure: 210bar, control: CDIAS, weight: 3.6t, an on-site inspection is possible. Djdpfjzybu Hex Akmsku

Condition: excellent (used), Year of construction: 2006, clamping force: 500 kN, screw diameter: 22 mm, clearance between the columns: 355 mm, overall weight: 2,700 kg, Clamping force: 50 t Year of manufacture: 2006 Injection unit .../200 Screw diameter: 22 mm Specific injection pressure: 2800 bar Injection volume: 41.8 ccm Mould clamping system 50/... Clamping force: 50 t Mould plate dimensions: 520 x 520 mm Tie bar clearance: 355 x 355 mm Mould height: 210 mm Opening stroke: 400 mm Maximum platen distance: 610 mm Dksdpfx Ajzt Ih Tskmju Weight: 2700 kg Dimensions (m) L x W x H: 3.8 x 1.1 x 2.1 m Control: NC4

Condition: used, Clamping force: 800kN, tie-bar spacing: 400mm, injection unit: 430, max. flow rate: 76l/min, max. hydraulic pressure: 210bar, control: CDIAS, weight: 3.6t, an on-site inspection is possible. Dksdpsz Dkh Ujfx Akmou

Condition: used, Year of construction: 2018, Machine no. 55, serial no. 80430240, NC 5 control system, maximum clamping force 2,800 kN, conveying device, manufacturer Colortronic, tool control unit, manufacturer Altanium, handling system, manufacturer Sumitomo Demag, type Industrial Robot, serial no. SDR22S, year of manufacture 2018, maximum load capacity 36 kg, safety fence, conveyor belt, length/width approx. 2,200 x 500 mm. Dkjdpfx Akjz H N Ncemou

Condition: excellent (used), Year of construction: 2012, Sumitomo Demag Systec 350/720-2300 / Production Line with Wittmann-Demag DR833 Robot Year of manufacture: 2012 Injection Unit: Screw diameter: 70 mm Shot weight: 1103 g Injection pressure: 1877 bar Dosage volume: 1212 cm³ Clamping Unit: Clamping force: 350 t Tie bar distance: 720x720 mm Platen size: 1040x1060 mm Ejector: hydraulic Clamping system: toggle lever Control system: NC5 Additional equipment: Euromap 67 Robot interface 5x air valves 1x hydraulically operated core pull with proportional valve 5x hot runner controls Hardened injection unit – bimetal Moog proportional valve on the injection unit – high-precision injection Parallel movements Central lubrication 3 variable-capacity hydraulic pumps Integrated printer Machine has been regularly serviced by authorized Sumitomo Demag technicians Robot Wittmann-Demag DR833 Year of manufacture: 2011 Dedpfx Asz Iplmskmoku 4-axis robot: 3 axes driven by servomotors (electric), Y-axis telescopic; C-axis pneumatic, A-axis movement Axis travel: X-900, Y-1600, Z-3000 Touch control panel Robot safety package Robot with adapter, conveyor belt, and protective enclosure Purchase of the robot and conveyor belt at additional cost Dimensions: Weight: 15,750 kg L x W x H: 8.26 x 2.01 x 2.27 m All offered machines are started up by our service technicians prior to sale. It is possible to obtain a video of technical tests for the selected machine, or to participate in live technical tests at our facility in Łódź. Price: On request

Condition: used, Demag Ergotech 3300-840, Demag injection molding machine, used machine Manufacturer : Demag, Sumitomo Model: Ergotech 3300-840 Overall dimensions : Length x Width x Height: 6.5 x 2.0 x 2.2 meters Net weight (without oil): 13 800 kg TECHNICAL DATA (BY SCREW DIAMETER) ----- Description Unit "A" "B" "C" ----- Screw diameter: [mm] 45 50 60 L/D ratio: [-] 20 20 20 Injection pressure (at 400 °C): [bar] 2402 1946 1351 Shot volume: [cm3] 358 442 636 Shot weight (PS): [g] 320 400 570 Barrel heating power: [kW] 13.0 14.8 23.1 Installed electrical power*: [kW] 58/68 60/70 68/78 ----- * Note: Values are higher with electric screw drive (WA). Dsdpsx Sqi Hofx Akmoku INJECTION UNIT FEATURES ----- Max. dosing stroke: 225 mm Max. nozzle retraction: 470 mm Nozzle immersion depth: 40 mm (SVO) / 30 mm (SPI) Nozzle contact force: 80 kN Electric screw drive (WA): 20.5 kW Material hopper capacity: 75 liters GENERAL AND HYDRAULIC DATA ----- Hydraulic oil tank capacity: 700 liters Pump unit power: 45 / 55 kW Dry cycle (EUROMAP 6a): 1440 / 1600 h-1 Dry cycle (without nozzle movement): 1890 / 2100 h-1 Continuous noise level: 74 dB (A)

Condition: excellent (used), Year of construction: 2014, Sumitomo Demag Systec 210/580-430 with Sepro Success 22 robot / Hybrid machine Year of manufacture: 2014 Injection unit: Screw diameter: 35 mm Shot weight: 153 g Injection pressure: 2640 bar Dosing volume: 168 ccm Clamping unit: Clamping force: 210 t Tie bar spacing: 580x580 mm Platen size: 860x860 mm Ejector: hydraulic Clamping unit: toggle Controller: NC5 Additional equipment: Very good technical condition Hybrid machine: high-speed, energy-saving and quiet Operating hours: approx. 30,000 h in automatic operation Euromap 67 Robot interface Air valve x 9 Hydraulic needle core pull, controlled by a proportional valve x 1 Hydraulic core pull x 4 Air core pull x 5 Controller with hot runners x 8 Injection unit hardened - bimetal Main motor of the machine - servo motor driven by an inverter - energy saving Proportional valve on the injection unit – precise injection Parallel movements Integrated printer Dkedpez Ipkcefx Akmeu Dimensions: Weight: 8930 kg Length/Width/Height: 6.02x1.76x2.15 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in technical live tests at our company in Łódź. Price: On request

Condition: like new (used), Year of construction: 2023, Technical Data: Maximum clamping force: 3,500 kN Maximum locking force: 3,850 kN Opening stroke: 725 mm Minimum mold installation height: 400 mm Maximum mold installation height: 900 mm (extended) Clamping plate dimensions (h x v): 1,168 x 1,144 mm Clear tie bar spacing (width x height): 830 x 830 mm Maximum mold weight: 6,600 kg Maximum weight on moving platen: 3,800 kg Maximum weight on fixed platen: 5,100 kg Ejector stroke: 250 mm Ejector force (increased): 100 kN Max. ejector speed: 270 mm Screw diameter: 60 mm Injection pressure: 2,426 bar Max. injection volume: 891 cm³ Max. injection speed: 160 mm/s Max. dosing stroke: 315 mm Max. nozzle stroke: 520 mm Nozzle immersion depth: 20 mm Back pressure over dosing stroke programmable Installed cylinder heating: 23.1 kW Material hopper capacity: 110 l Machine weight: approx. 21 t Accessories: Robot: Manufacturer: SEPRO ROBOTIQUE (France) Model: 5T35 2000/900/TE-1800 Year of manufacture: 2023 Stroke: 2,000 mm Speed: 3.5 m/s Horizontal demolding stroke Y-axis: 900 mm Vertical demolding stroke X-axis: 1,800 mm Robot console on fixed platen Gripper function R1 (C) axis pneumatic 0° - 90°, including quick-change plate Weight: 583 kg MuCell Integration: The special option includes: • Plasticizing cylinder with pneumatic shut-off nozzle without mixing element and without non-return valve; Dkjdpfoy Hmfyox Akmeu • Interface (communication, emergency stop interface); • Software with functional display pages for controlling the MuCell function; • Adapted nozzle guard; • Position-controlled high-speed screw (analog ZE388) Conveyor belt: Width: 870 mm Usable width: 800 mm Length: 3,500 mm Height: 880 - 1,220 mm Load capacity: 38 kg/m² Belt speed: 5.7 m/min Number of frames: 2 Clear tunnel height: 500 mm This injection molding machine is fully equipped!! Condition: As new condition, only 5,290 operating hours.

Condition: excellent (used), Year of construction: 2007, clamping force: 1,000 kN, screw diameter: 40 mm, clearance between the columns: 420 mm, injection pressure: 1,865 bar, injection weight: 192 g, mold height (min.): 200 mm, ejector stroke: 100 mm, Year of manufacture: 2007 Injection shot weight: 192g Dksdpfx Akjzt I Rnemju Injection unit 410 Screw diameter: 40 mm Specific injection pressure: 1865 bar Injection volume: 217 ccm Injection shot weight: 192 g Screw L/D ratio: 20 Mold closing unit 100 Mold plate dimensions: 600x600 mm Distance between columns: 420x420 mm Ejector force: 35 kN Mold height: 200 mm Ejector stroke: 100 mm Weight: 5000 kg Control system: NC4 Tooling: - 2 x hydraulic core - pneumatic valve - Euromap 67 connector

Condition: excellent (used), Year of construction: 1995, Demag Ergotech Compact 250-80 Dkedpfez Iqlbox Akmou Year of manufacture: 1995 Injection unit: Screw diameter: 18 mm Injection weight: 20 g injection pressure: 2400 bar Dosing volume: 22.8 ccm Clamping unit: clamping force: 25 t tie bar distance: 280x280 mm size of clamping platens: 410x410 mm ejector: hydraulic clamping unit: hydraulic Control system: NC4 Additional equipment: Air valve x 2 Hydraulic core pull x 1 Injection unit hardened - bimetal Original Demag mold crane: chain, electrically controlled, 2 lifting speeds Dimensions: Weight: 2600 kg Length/width/height: 3.20x1.30x1.80 m Drive: Pumps/motor: 7,5 kW Heating power: 3,7 kW Total power: 11,2 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: used, Year of construction: 2023, Machine No. 26, Serial No. 7271-0616, NC5+ control system, maximum clamping force 1,300 kN, conveyor system, manufacturer Colortronic, handling system, manufacturer Wittmann, type Primus 14-0704, year of manufacture 2023, safety enclosure, conveyor belt, L/W approx. 1,800 x 800 mm, skylight. Dkedjz H Rc Dopfx Akmsu

Condition: excellent (used), Year of construction: 2006, Demag Ergotech System 80/420-430 Year of manufacture: 2006 Injection unit: Screw diameter: 40 mm Injection weight: 205 g Injection pressure: 2020 bar Metering volume: 231 ccm Clamping unit: clamping force: 80 t tie bar distance: 420x420 mm size of clamping platens: 580x590 mm ejector: hydraulic clamping unit: hydraulic Control system: NC4 Additional equipment: Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 3 Control with hot runners Injection unit hardened - bimetal Built-in printer Djdpfx Ajz Iql Ijkmjku It is possible to change the screw diameter Dimensions: Weight: 4100 kg Length/width/height: 4.10x1.40x1.90 m All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: like new (used), screw diameter: 82 mm, Screw assembly (plasticizing unit) in 82mm Suitable for: DEMAG D430-2350 NC II + NC III machines DEMAG D400-2800 NC III DEMAG D500-2800 NC III Shot weight: 1390g = 1560ccm (D430-2350 NC II & NC III) Shot weight: 1490g = 1670ccm (D400/D500-2800 NC III) The mounting block (cooling flange) must be transferred from the old cylinder. The screw and barrel are as new (dimensions are OK) Complete with RSP. Djdpjw A R H Tsfx Akmjku

Condition: good (used), Year of construction: 2003, Demag ergotech extra 800-430 (2003) Dkedoyyzi Hepfx Akmou

Condition: ready for operation (used), Year of construction: 2011, operating hours: 46,000 h, clamping force: 245 kN, screw diameter: 18 mm, Hydraulic injection moulding machine manufactured in 2011. This SUMITOMO SHI DEMAG Systec 25/320-80 features a clamping force of 25 t and a screw diameter of 18 mm. It offers a maximum metering volume of 23 cm³ and a mold height range of 130 mm to 480 mm. If you are looking to get high-quality injection moulding capabilities, consider the SUMITOMO SHI DEMAG Systec 25/320-80 machine we have for sale. Contact us for further details. - Max. Specific Injection Pressure: 2868 bar- Max. Metering Volume: 23 cm³- Mold Height: 480 mm- Min. Mold Height: 130 mm- Distance Between Tie Bars: 320 x 320 mm- Centering Hole Diameter (Ejector/Nozzle): 110 mm- Maintenance Group: 1- Core Pull: 1- Operating Hours: 46,000 hrs (Pump)- Pump Drive Power: 17.5 kW- Power Supply: 400 V ±10% / 50 Hz, 3 Ph+N+PE- Cooling Circuit: Open, separated water connection for mold and machine cooling- Cylinder / Screw: Bimetallic cylinder, wear-resistant 18 mm screw with 3-piece non-return valve- Nozzle: Open nozzle M24x1.5, flat radius, 2.0 mm bore- Integrated Sockets: 2 x Schuko 1Ph/230V/10A, 2 x IECEE 3Ph/400V/16A Dedpfoz Erxksx Akmoku

Condition: ready for operation (used), Year of construction: 2015, operating hours: 15,642 h, screw diameter: 45 mm, total height: 2,213 mm, overall weight: 15,750 kg, This SUMITOMO SHI DEMAG Systec SP 350/720-840 was manufactured in 2015. It is a hydraulic injection moulding machine, ideal for precision plastic processing. Consider the opportunity to buy this SUMITOMO SHI DEMAG Systec SP 350/720-840 hydraulic injection moulding machine. Contact us for more information. Additional equipment • Fanuc Robot Machine Benefits Qualitative Machine Benefits • Process data acquisition, mould protection Technical Machine Benefits • Mould height min: 350 mm / mould height max: 745 mm • Main electronic connection: 3/400 v 50hz • Programmable sequence, highly dynamic feed speed, hydraulic pressure-dependent holding pressure control, digital/wear-free position measuring system. Extra Information Standard equipment: Support of the moving mould mounting platen via linear guides/ Ejector short / long stroke/ Interface for external printer (hardcopy)/ Individual axis movement optimization (activeAdjust)/ Four-stage mould closing and four-stage mould opening sequence/ Pump drive power II, increased (59.0 kW)/ Mains voltage 400 V ±10% / 50 Hz, 3 phases + N + PE/ Djdpfx Aksx D Hntjmoku Mains connections drive / heating separate/ Data display coloured/ Oil cooler reinforced (cooling water supply up to 35 °C)/ Water connection for mould and machine cooling separate/ Basic version Europe/ Corrosion protection/ Paint finish: Deep black (RAL9005): Machine bed with internals, lower switch cabinet/ Signal white (RAL9003): Clamping unit, injection unit, nozzle guard/ Signal white (RAL9003): Fixed safety devices, upper switch cabinet/ Signal white (RAL9003): Safety doors/ Textured surfaces: Elastic machine bearings/ Digital and wear-free position measuring system (ultrasound/high-resolution rotary encoders for injection, mould and ejector movement)/ Mould connection dimensions type E (according to EUROMAP March '96)/ Centring diameter fixed platen: 160 mm/ Centring diameter moving platen: 160 mm/ Without side ejector plate/ Standard mold installation height: Min: 350 mm/ Max: 745 mm/ Standard closing speed (movements only when safety gate is closed)/ Ejector with position control (p/F+v independently programmable, parallel to mold movement)/ Toggle lever oil lubrication/ Injection unit/ Optional equipment: Speed-controlled pump Servo Technology (activeDrive)/ Emergency stop switch on operator side/ Separate opener for ultra-fine filtering in the bypass (activeCool&Clean)/ Socket 1 x Schuko (230V / 10A), can be disconnected via main switch/ Socket IECEE 3Ph / 400V-16A, can be switched off via main switch/ Flashing light/ Operation with safety door open (operator side)/ 6 pneumatic 5/2-way valves on movable tool plate (programmable)/ 6 pneumatic 5/2-way valves on fixed tool plate (programmable)/ Central maintenance unit for pneumatic valves/ Core pull 1-circuit via proportional valve (programmable, with non-return valves)/ Manual pressure relief for core pull 1-circuit/ Protective clothing on operator side widened (250 mm)/ Hot runner control 12 zones, integrated (2, 75 kW)/ Pneumatic hot runner nozzle control (1x 5/2-way valve)/ Clamping force control/ Active mold protection via sensor when closing (activeQ)/ Manually adjustable monitoring switch for mold open position/ Central grease lubrication (manual)/ Material hopper for automatic filling/ Hopper shut-off with emptying option/ Holding pressure switchover dependent on hydraulic pressure (with pressure recording)/ Nozzle contact pressure when mold is open (programmable)/

Condition: good (used), Year of construction: 2001, functionality: fully functional, clamping force: 800 kN, screw diameter: 30 mm, For sale is an injection molding machine of the brand Demag, type 80/420-200 System The machine is in good and functional condition ATTENTION: No backup disks available Technical data: Year of manufacture: 2001 Clamping force: 800 kN Tie bar distance V: 420 mm Tie bar distance H: 420 mm Plate size H: 590 mm Plate size V: 600 mm Minimum installation height: 250 mm Maximum plate distance: 700 mm Opening stroke: 450 mm Ejector stroke: 150 mm Ejector force: 41 kN Tool weight: 700 kg Screw diameter: 30 mm Dimensions: approx. 4.5*1.50*2 m Weight: 4t Transport and loading can be organized Europe-wide at extra cost on request. Prices plus VAT Inspection possible by appointment. Contact us, our team looks forward to assisting you. Trade-in or exchange possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? Dsdpfxsnfu I Io Akmoku For more information or contact options, visit our website.

Condition: ready for operation (used), Year of construction: 2020, operating hours: 8,000 h, clamping force: 500 kN, screw diameter: 25 mm, injection weight: 46 g, total height: 1,779 mm, overall weight: 4,200 kg, This SUMITOMO SHI DEMAG Intelect 2 50/370-110 was manufactured in 2020. It features a fully electric direct-drive system, NC5+ control for enhanced energy efficiency, and precise injection dynamics. Includes a granule dryer, industrial robot, conveyor belt, and temperature units. Ideal for high-quality injection moulding processes. Contact us for more information about this machine. Additional equipment • Granule Dryer • Handling System • Conveyor Belt - 1400 mm x 400 mm • Precision Scale • Temperature Units - 2x HB‑Therm Machine Benefits Technical Machine Benefits • Exceptional energy efficiency • Enhanced platen rigidity and mold safety • Fully electric direct-drive system • Ultra-precise direct-drive motors with 0. 1 ms response time • Displacement: 52 cm³ • Spray pressure: 2180 bar • Tool clamping platens: 520 x 570 mm Extra Information Control Unit Dsdpjx D Eccofx Akmeku Advanced control system with NC5+ Automatic mold height and clamping force adjustment Energy-saving routines Dimensions Machine Depth 4308 mm

Condition: ready for operation (used), Year of construction: 2019, operating hours: 25,500 h, clamping force: 10,000 kN, screw diameter: 110 mm, displacement volume: 3,136 cm³, Sumitomo SHI Demag EL-Exis SP 1000-6300 Dsdeygk Eispfx Akmsku

Condition: ready for operation (used), Year of construction: 2005, clamping force: 1,600 kN, screw diameter: 45 mm, Hydraulic injection moulding machine manufactured in 2005. This DEMAG Ergotech Extra 160-430 features a clamping force of 1,600 kN and a maximum injection volume of 259 cm³. It has a screw diameter of 45 mm and accommodates molds with a maximum height of 585 mm. If you are looking to get high-quality injection moulding capabilities, consider the DEMAG Ergotech Extra 160-430 machine we have for sale. Contact us for further details. • Space between columns: 520 x 520 mm • Maximum mold height: 585 mm • Minimum mold height: 275 mm • Maximum injection volume: 259 cm³ • Maximum injection pressure: 1,600 bar • Centering ring: 160 mm • Hot runners in the machine: 8 Dkedpfxez Ibiko Akmou • Core puller: 1 • Pneumatic valves: 2 • Programmable inputs: 2 Additional equipment • Hiltectro V-1000 IS robot (MY: 2020) • Belt conveyor with safety enclosure

Condition: excellent (used), Year of construction: 2015, year of last overhaul: 2025, Demag Systec 210-840 (2015) SERVO Manufacturer: Sumitomo SHI DEMAG Type of machine: Systec 210/580-840 Clamping force [kN]: 2100 Shot volume [cm³]: 358 Clearance between tie bars hor. [mm]: 580 Clearance between tie bars vert. [mm]: 580 Dedozbg Ezopfx Akmjku Mold height min. [mm]: 340 Mold height max. [mm]: 690 Opening stroke max. [mm]: 575 Daylight max. [mm]: 1365 Year of manufacture: 2015 Machine dimensions L/W/H [mm]: 6022 / 1556 / 2090 Control unit and software version: NC3 Max. weight of entire molding tool [kg]: 3300 Screw diameter [mm]: 45 Screw design: 3 zone Screw relation (length/diameter): 20:1 Screw back flow valve: Yes Ejector system type: Hydraulic Installed heating power [kW]: 39 No. of integrated hot runner circuits: 12 Number of temperature control electrical valves: 28 Number of cascade controls: 2 Connection to central drying system: Yes Unloading robot system available: Yes Number of tempering units: 3 Tempering units max. temperature [°C]: 160 Machine oil capacity [l]: 400 Net power of hydraulic pump engine [kW]: 26

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, clamping force: 4,200 kN, screw diameter: 70 mm, clearance between the columns: 820 mm, displacement volume: 1,212 cm³, injection pressure: 1,877 bar, injection weight: 1,100 g, mold height (min.): 380 mm, ejector force: 96,000 N, ejector stroke: 230 mm, plate length: 1,200 mm, plate width: 1,200 mm, total length: 8,020 mm, total width: 2,210 mm, total height: 2,570 mm, overall weight: 21,000 kg, Closing force: 420 t Year of manufacture: 2015 Injection weight: 1,100 g Injection unit 2300 Screw diameter: 70 mm Dkjdpfxez E Imws Akmsu Screw L/D ratio: 20 Specific injection pressure: 1877 bar Injection volume: 1212 ccm Injection weight: 1,100 g Pump motor power: 51 kW Cylinder heater band power: 27 kW Closing unit Closing force: 420 t Tool plate dimensions: 1200 x 1200 mm Distance between tie bars: 820 x 820 mm Mold height: 380 - 825 mm Opening stroke: 770 mm Maximum mold distance: 1595 mm Ejector force: 96 kN Ejector stroke: 230 mm Weight: 21,000 kg Dimensions (m) L x W x H: 8.02 x 2.21 x 2.57 m Control: NC5 Equipment: - Hydraulic core pull: 4 (+ 2 additional connections on the stationary platen) - Hydraulic cascades: 4 - Hot runner adjustment points (zones): 40 - Servo-controlled activeDrive hydraulic pump (energy-efficient) - Adjustable p+v injection in a closed-loop system - Wear-resistant screw, bimetallic cylinder - Automatic mold height adjustment - Closing force adjustment - activeProtect mold protection - Switching to pressure-dependent clamping (WID) - PDE process data recording, 100% control - 8-circuit cooling water regulator - EUROMAP 67 interface - World Connect - remote service - DR 832 CNC robot and safety fence included

Condition: excellent (used), Year of construction: 2013, Sumitomo Demag Systec 100/420-310 with Sepro SR SDR11 S3 TRANS robot / Hybrid Machine Year of manufacture: 2013 Injection unit: Screw diameter: 35 mm Shot weight: 149 g Injection pressure: 2024 bar Dosage volume: 168 ccm Clamping unit: Clamping force: 100 t Tie bar spacing: 420x420 mm Platen size: 600x600 mm Ejector: hydraulic Clamping unit: hydraulic Control system: NC5 Additional equipment: Hybrid machine: high-speed, energy-saving, and very quiet Operating hours: approx. 38,000 h in automatic mode Robot interface Air valve x 2 Hydraulic core pull x 1 Hardened injection unit - bimetallic Djdpjz Ipi Ssfx Akmjku Main motor of the machine - servo motor driven by inverter - energy saving Built-in printer Machine was regularly serviced by authorized Sumitomo Demag service Robot Sepro SR SDR11 S3 TRANS Year of manufacture: 2013 5-axis robot: 3 axes driven by servomotors (electric); axes A and C (rotation) - pneumatic Touch control panel Robot safety package Robot with adapter, safety enclosure Robot acquisition available at an additional cost Dimensions: Weight: 4400 kg Length/Width/Height: 4.20x1.40x2.00 m All machines offered are started up by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine, or to take part in technical live tests at our facility in Łódź. Price: On request

Year of construction: 2019, operating hours: 18,138 h, condition: ready for operation (used), overall weight: 25,340 kg, This SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 was manufactured in 2019. A robust electrical injection moulding machine with a screw diameter of 50 mm, clamping force of 3,500 kN, and tiebar spacing of 820 mm. It has operated for 18,138 hours with 12,875,090 cycles. If you are looking to get high quality moulding capabilities consider the SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 machine we have for sale.Contact us for more information. Additional information • Screw Diameter: 50 mm • Maximum Dosing Volume: 530 cc • Cycles: 12875090 Dksdpfxjx D Nxzo Akmsu • Tiebar Spacing: 820 mm • Clamping Force: 3500 kN