Used Support Carriage Lower Part for sale (28,871)

Condition: good (used), Upper support, upper slide, dovetail guide, tool slide, cross table, support slide, support carrier, slide guide Bdodpfx Akswcw S Njlof -Tool slide: Support slide lower part support carrier -Dovetail: 90 to 73 mm 12 mm high -Dimensions: see photos -Quantity: 5x bottoms available -Price: per piece -Dimensions: 210/180/H25 mm -Weight: 4 kg/piece

Condition: good (used), Bezel, steady rest, lynette -Clamping tool: clamping bracket -Clamping width: 166 mm -Groove width: 32 mm -Dimensions: see photo technical drawing -Number: 2x clamps available Bdjdpeuqf Nvefx Aklsf -Price: per piece -Dimensions: 185/85/H47 mm / 184/82/H46 mm -Weight: 4.1 kg / 3.9 kg

Condition: good (used), Upper support, upper slide, dovetail guide, tool slide, cross table, support slide, support carrier -Tool carriage: support carriage support carrier -Tool holder: Ø 32 mm -Dimensions: see photos -Dimensions: 460/190/H205 mm -Weight: 21.6 kg Bjdswcwndopfx Aklsdf

Condition: good (used), Bezel, steady rest, lynette -Clamping tool: clamping bracket -Clamping width: 268 mm -Groove width: mm -Dimensions: see photo technical drawing -Dimensions: 285/85/H180 mm -Weight: 10.8 kg Bdjdpfxjv Sqmte Aklsf

Condition: good (used), Upper support, upper slide, dovetail guide, tool slide, cross table, support slide, support carrier Bodsv Tv Tnspfx Akljdf -Tool carriage: support carriage support carrier -Support plate: 265 x 180 mm -Dimensions: see photos -Dimensions: 290/280/H70 mm -Weight: 21.1 kg

Condition: good (used), Bezel, steady rest, lynette -Clamping tool: clamping bracket Bdodpfjwyvbwex Akljf -Clamping width: 272 mm -Holes: Ø 24 mm -Dimensions: see photo technical drawing -Dimensions: 300/125/H50 mm -Weight: 8.9 kg

Condition: excellent (used), Year of construction: 2014, Sanding machine for wood finishing and intermediate sanding of coatings. For sanding flat or profiled workpieces made of wood-based materials. A video of the machine in operation can be sent upon request. Workpiece width (brush width) approx. 1000mm Carpet width approx. 950mm Feed rate, steplessly adjustable, 2-10 m/min Disc sanding unit consisting of 7 discs, each 250mm in diameter, arranged in 2 rows, drive motor 1.5 kW. Roller sanding unit consisting of two counter-rotating roller units, approx. 300mm in diameter, drive motor 0.75 kW each. Both units can be operated in both left and right rotation and have steplessly adjustable speed. The roller sanding unit can also be angled. Maximum workpiece height 100mm Dust extraction connection 4 x 120mm, combined into a dust extraction hood with a diameter of 250mm Bdedpfxszpf Dkj Aklof Emergency stop switch and additional pull cord CE marking Operating manual 2 boxes of abrasive materials are included Original paint, only a few spots have been touched up. The machine has clearly not been used much, see original photos. It is ready for immediate use. The machine is now sold under the name Discmaster. Dimensions approx. 2350 x 1400 x 1600mm (LxWxH). Weight approx. 800kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are in stock in our warehouse, see "other offers from this provider".

Condition: used, functionality: unexamined, Rated voltage 380V, 15A Grinding motor 5.5 kW Feed motor 0.37 kW Bodeznv Uwjpfx Aklsdf Grinding belt width 200 mm Grinding belt length 1800 mm Pneumatic connection 6 bar Feed speeds 6 / 11 / 16 m/min Electric table height adjustment Belt air blast Dust extraction connection 140 mm

Year of construction: 2008, condition: good (used), functionality: fully functional, machine/vehicle number: 10999, DESCRIPTION Double-sided grinding machine / grinding machine top/bottom Manufacturer Löwer Type DSM 3000 with workpiece return Bthgq0Ygu0 Working width: 290 mm Grinding thickness: 2-200 mm Shortest workpiece length: approx. 320 mm Equipped with: 1x grinding unit from above, 7.5 kW 1x brushing unit from above, 0.37 kW 1x grinding unit from below, 7.5 kW 1x brushing unit from below, 0.37 kW Grinding belt dimensions: 300 x 1800 mm Electric height adjustment, 0.37 kW Adjustable feed, 6/11/16 m/min. Compressed air: 6-8 bar Bjdsv Dfp Hepfx Aklodf Dimensions approx. 2700 x 1100 x 1900 mm Weight approx. 1600 kg

Year of construction: 1998, condition: used, Colour: Grey Bdjdpfx Akjwnh Avjljf Polishing sander Löwer FA 4 S Year of construction 1998 Machine no. 9667 400V, 14.5Amp. 4x 0.37kW motor Working length 3000mm Dimensions: 5000x18050x1600mm (LxWxH), weight 550kg - Year: 1998 - Documentation available: Yes - CE certificate present: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Year of construction: 1989, condition: used, functionality: fully functional, Grain Hopper Railway Wagons for Sale – Models 11-739 and 19-752 Container Flat Wagons for Sale – Models 13-470 and 13-9004 Railway Tank Wagons for Sale – Model 15-1443 SHORT DESCRIPTION Grain Hopper Railway Wagons - A selection of four-axle covered grain hopper railway wagons manufactured between 1976 and 1989. Available models include 11-739 and 19-752, with a tare weight starting from 21.3 tonnes. Wagons are available with either a valid remaining period until the next scheduled repair or an expired scheduled repair interval. Bdjdpfxszmtufe Aklof Container Flat Wagons - A selection of four-axle container flat wagons, also known as fitting platforms, manufactured between 1980 and 1991. Wagons are available with either a valid remaining period until the next scheduled repair or an expired scheduled repair interval. Buyers can select units according to their preferred model, year and repair status. Railway Tank Wagons for Sale – A selection of used railway tank wagons, model 15-1443, manufactured in 1977 and 1978. Declared tare weight is approximately 22.5 tonnes. Wagons are available with either a valid remaining scheduled repair interval or an expired repair interval. Buyers can select units according to the required year, condition and repair status. FULL DESCRIPTION Main information: • Models: 11-739 and 19-752 • Years of manufacture: 1976 to 1989 • Tare weight: from 21.3 tonnes • Multiple wagons available • Individual selection according to repair status Models: 13-470 and 13-9004 • Years of manufacture: 1980 to 1991 • Declared tare weight: approximately 21.3 to 22.0 tonnes, depending on the individual wagon • Multiple wagons available • Individual selection according to model and repair status Model: 15-1443 • Years of manufacture: 1977 and 1978 • Declared tare weight: approximately 22.5 tonnes • Multiple wagons available • Individual selection according to technical condition and repair status The available fleet includes: • Wagons with a valid remaining period until the next scheduled repair • Wagons whose scheduled repair interval has expired and which require scheduled workshop repair before further operation Buyers can select wagons according to their preferred model, year of manufacture, technical condition and repair status. The exact model, manufacturing year, repair history and technical condition vary between individual wagons. Detailed wagon lists, identification numbers, photographs, available documentation and commercial terms can be provided on request. Price on request.

Condition: excellent (used), CATALOGUE NUMBER: 6507 TECHNICAL DATA SURFACE PLANER: Bedpfx Aszmg N Nekledf - shaft width: 510mm - rollers in the bottom table - original cast iron tilting fence - table length: 1810mm - both tables adjustable THICKNESSER: - max thickness of workpiece on thicknesser: 200mm - cutterhead guard on the thicknesser from above: - pawls - geared infeed roller - pressure bar - planer cutterblock - pressure bar - smooth outfeed roller from below: - 2 adjustable rollers in the bottom table - 2 feed speeds - main motor: 2.95kW - dimensions (LxWxH): 1940x1200x1120mm - weight: 970kg Net price: 13,900 PLN Net price: 3,300 EUR Net price calculated at 4.2 PLN/EUR (in case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), Number of sanding units 4 St. sanding width 190 mm Sanding height max. 180 mm Control ja weight 3300 kg Dimensions (L/W/H) 2600x920x1890 mm Dust suction hood 2x180, 2x120 mm Löwer DSM 2004 Double-Sided Sanding Machine ----- 4-Belt Sander + Disc Unit (Top/Bottom) Manufacturer's Description: ----- Double-sided, four-belt, single-wood sander for sanding solid wood such as window frames, etc. Highly stable, top-quality design with innovative details. Suitable for high continuous loads, even with high material removal rates. - Sequentially arranged grinding units for roughing, fine grinding, and finishing, each from above and below 1. Belt grinding unit with heavy steel roller 2. Belt grinding unit with rubberized roller and shoe 3. Finishing unit with fiber brush (see optional equipment below) Bdsdpfsvu Hgbox Aklef - Direct-drive grinding rollers for slip-free power transmission - Maintenance-free and wear-free CERMET-coated grinding shoes with very good thermal conductivity and absolute dimensional accuracy - External cooling of the grinding zones for cooler grinding and longer belt life - Forced pneumatically controlled grinding belt oscillation - Effective grinding dust extraction directly at the grinding rollers - Airborne dust extraction at the tension rollers - Integrated brushing and finishing unit with large grinding dust extraction - Motorized grinding thickness adjustment via precision threaded spindles and large linear ball bearing sets on hardened and ground precision shafts with dust and Dirt protection - Chip removal adjustment at the bottom via precision threaded spindle with dimension display via scale ring (0.1 mm resolution) - Sanding belt tension via pneumatic cylinder with constant tension pressure - Sanding belt change with pneumatic belt release in seconds - Sanding belt tracking adjustment during belt change - Electropneumatic compressed air monitoring - Infeed protection via contact roller for workpieces that are too thick - Workpiece transport via calibrated, non-slip and adhesive conveyor belts over heavy-duty cast iron tables with a finely planed surface and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and consistent workpiece transport - Geared feed motor with infinitely variable speed 4-20 m/min - All motors electrically protected - Ergonomically arranged operating elements - Digital thickness display (0.1 mm resolution) with modern magnetic tape system Technical data: ----- - Sanding belt speed 22 m/s - Sanding belt length 1800 mm - Sanding belt width 200 mm - Working width 190 mm - Sanding thickness 2-180 mm - Four brake motors for drive 5.5 kW - Feed motor 1.5 kW - Feed speed 4-20 m/min - Automatic height adjustment 0.37 kW - Two brush units with fiber brushes D 120 x 200 mm at 0.37 kW each - Extraction ports 2 x 180 mm, 2 x 120 mm - Extraction air velocity 20 m/s - Pneumatic connection 6 bar - Working height 870 mm - Length (with soft disc 2740 mm) 2600 mm - Length with control unit (with soft disc 3035 mm) 2985 mm - Width 880 mm - Height 1910 mm - Weight approx. 3300 kg - Operating voltage 400 volts, 50 Hz, 3P - CE compliant Equipped with the following special options: -----...

Condition: reconditioned (used), Year of construction: 1982, functionality: fully functional, overall weight: 950 kg, Sanding belt length 2200 mm, sanding belt width 400 mm, table length 1200 mm, usable height 120 mm, sanding width 390 mm, sanding belt speed approx. 21 m/sec, feed speeds 6 - 11 - 16 m/min, main drive motor 7.5 kW, feed motor 0.26 - 0.55 - 1 kW, pneumatic belt oscillation and belt air-blast, frame support, chassis. Bsdpfxsxq Ehxj Aklodf

Condition: used, Frame sanding machine LÖWER RSM 280 SX -used- Frame sanding machine sanding pad, oscillation, frame sanding device, feed belt, belt cleaning ----- Technical data ----- Sanding width: 190 mm, max. workpiece thickness: 120 mm, Speeds: 6,11,16 m/min, Motor: 5.5 kW, Bjdpfxeu R Tbhe Akljdf weight: 550 kg

Year of construction: 2022, condition: used, functionality: fully functional, Single-Use Support Ultra-Freezer RoSS.FRDG Temperature range: +10° to -80°C Capacity: up to 300L Shelf system for 20L Meissner containers included Highest storage density for frozen biopharmaceuticals Easy installation and loading with frozen active ingredients Net weight: 600 kg Bdedpfx Akozhuuvolsf Currently, up to 5 units are available for sale. The units are currently out of service and stored. The new price per unit was >40,000 EUR.

Year of construction: 1994, condition: good (used), Sheetmetalworking tooling Multi V Lower tooling 75 x 75 x 3100 mm MACH-ID 4131 Type: Multi V Lower tooling 75 x 75 x 3100 mm Bsdpozc Iztefx Aklsdf Year: 1994 Total length:3100mm Total hight:75mm Length: 3100mm Width: 75mm Height: 75mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Sheetmetalworking tooling Multi V Lower tooling 140 x 140 x 6000 mm Total length:6000mm Bdjdpszc Izgofx Aklsf Total hight:140 x 140mm V-size: 8 - 10 - 16 - 20 - 24 - 30 - 40mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, Number of sanding units 4 St. sanding width 190 mm Sanding height max. 180 mm LÖWER-DoubleSander Solid DSM 2004 ----- Double-sided four-belt single wood sander for Sanding solid wood such as window frames etc. Highly stable top design with innovative details. Suitable for high continuous loads even with higher chip removals. - sanding units arranged one after the other for pre-grinding, Fine sanding and finishing sanding, each from above and below 1. Belt sanding unit with heavy steel roller 2. Belt sanding unit with rubberized roller and shoe 3. Finishing unit with fiber brush - Directly driven grinding rollers for slip-free Power transmission - maintenance and wear-free CERMET-coated grinding wheels shoes with very good thermal conductivity and absolute Dimensional accuracy - External cooling of the grinding zones for cooler grinding and longer sanding belt service life - force-guided pneumatically controlled sanding belt oscillation - effective sanding dust extraction directly on the Grinding rollers - Airborne dust extraction on the tension rollers - Integrated brushing and finishing device with large Grinding dust extraction - motorized grinding thickness adjustment via precision threaded spindles and large-sized linear ball screws bearing sets on hardened and ground precision shafts with dust and dirt protection - Adjustment of the chip removal at the bottom via precision Threaded spindle with dimension display via scale ring (Resolution 0.1mm) - Sanding belt tension via pneumatic cylinder constant clamping pressure - Sanding belt change with pneumatic belt relaxation Within seconds - Adjustment option for the sanding belt run Band change - electro-pneumatic compressed air monitoring - Anti-running protection via contact roller if it is too thick workpieces - Workpiece transport via calibrated non-slip and non-stick fixed conveyor belts over heavy, cast tables Finely planed surface and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and consistent Workpiece transport - Feed gear motor with stepless speed 4-20 m/min - all motors electrically protected - ergonomically arranged controls - digital thickness display (resolution 0.1mm) with modern Magnetic tape system Technical data: - Sanding belt speed 22 m/s - Sanding belt length 1800mm - Sanding belt width 200mm - Working width 190mm - Grinding thickness 2-180mm - four brake motors for 5.5 kW drive - Feed motor 1.5 kW - Feed speed 4-20 m/min. - automatic height adjustment 0.37 kW - two brush units with fiber brushes D 120 x 200mm at 0.37 kW - Suction nozzle 2 x 180mm 2 x 120mm - Extraction air speed 20 m/s - Pneumatic connection 6 bar - Working height 870mm - Length (with soft disc 2740mm) 2600mm - Length with control panel (with soft disc 3035mm) 2985mm - Width 880mm - Height 1910mm - Weight approx. 3300 kg Bsdpfxevnv Tqj Aklodf - Operating voltage 400 volts, 50 Hz, 3P - CE version ----- Price of the above machine on request! ----- Special accessories with additional charge: Workpiece blow-off - using nozzles from above and below at the machine outlet arranged, pneumatically controlled 4-belt sanding belt blowout via nozzles directly on the radii of the tension rollers inside the suction arranged, timer controlled on/off 5 seconds each, can be switched on separately Di...

Condition: used, sanding width 150 mm Motor output 1 kW Bdedpfx Aksy Umfvolof tiltable up to 90 Grad Three-dimensional, swivel-mounted Löwer type KS 225 edge sanding machine for precise sanding of straight and curved wooden edges. The lightweight design and powerful motor enable a uniform sanding pattern with high removal rates. Ideal for small joineries, furniture construction and interior fittings. Possible applications: Horizontal edge, horizontal plane or vertical bevel.

Year of construction: 2025, condition: new, DOLFİN- VDL series Drum (Spiral) parts washing machines are used particularly for the purpose of cleaning small parts that are manufactured in large quantities and in bulk. The materials that are poured from the inlet part of the spiral drum in the device are directed towards the outlet part of the drum with the spirals inside the drum. While the drum moves in its own axis according to the set rotation speed, it subjects its parts to, respectively, washing (degreasing), rinsing, passivation and drying processes (varies per the model). Since these processes are sequential and continuous, all processes are completed quickly and effectively within a single device. Full penetration is ensured by pressurized spraying and dipping effects in each section. It is a very functional model of us that is used particularly for washing the bolts, nuts, washers, or such small parts, fittings, nipples, couplers and fittings that are processed in CNC and automated machines in high quantities. Regardless of the metal type of the parts to be washed, they are fully compatible with steel, brass, aluminum copper or stainless steel materials. Since Dolfin Parts washing machines operate as closed loop, new water and new detergent are not used every time. While washing is performed for several times with the same tank, all the dirt remains in the washing cell. With this feature, it protects both nature and employees. Due to its high efficiency and performance, saves energy, water and labor. The device operates continuously in accordance with the values of the washing parameters that have been entered from the control panel before operation. Parts that come out of production in bulk can be loaded into our device in 3 different manners. 1. With Vibrating Loading Chamber, 2.With Lift Conveyor, 3. By coupling to our Customer's existing system, Do not hesitate to contact for more information. Bodpfx Akov S Dk Sjljdf We produce for you with 40+ years of experience! We export to more than 30+ countries with quality and trust.

Year of construction: 2025, condition: new, DOLFIN-kbn2 series parts washing machines are used for the purpose of washing the parts, which are also larger in size and heavy, requiring rinsing, passivation or another process, particularly after washing. While it is desired to have no oil and other contaminants on the surface before assembly or packaging at the businesses and factories manufacturing parts in masses, it may also be necessary to remove the washing chemical used in the 1st stage from the surface of the part according to the utilization areas of the part. For this requirement, rinsing or a similar implementation in 2nd step is compulsory. Our KBN 2 series parts washing devices are special devices that contain more than one tank and/or bath. While the parts that are placed in the device are rotated on their own axis by means of the washing basket, pressurized detergent hot water is sprayed. With the pressure, temperature and chemical effect, all oil and contamination on the part is cleaned. After the washing process and following the direction of the washing chemical to its own tank, the rinsing operation starts in the 2nd tank. If desired, the 3rd tank can be added and another function is added after rinsing. Since Dolfin Parts washing machines operate as closed loop, new water and new detergent are not used every time. While washing is performed for several times with the same tank, all the dirt remains in the washing cell. With this feature, it protects both nature and employees. Due to its high efficiency and performance, saves energy, water and labor. The device automatically completes the loop in accordance with the values of the washing parameters that have been entered from the control panel before operation. Bjdpfx Akev S Dihjlsdf All processes are carried out with specially prepared programs along with PLC. In order to load, particularly the heavy items into the washing basket or to remove them from the basket, the washing basket can be taken on a carrier trolley, in other words, from the device when required. It can be transferred to any point of the workshop with this trolley. We produce for you with 40+ years of experience! We export to more than 30+ countries with quality and trust.

Condition: good (used), Year of construction: 1996, double-sided top and bottom sanding with sanding shoe and dust brush max. sanding width 300 mm max. sanding height 200 mm year of manufacture 1994 with CE mark Bdodpfx Akexfl Eaolsf

Condition: new, Number of sanding units 8 st. sanding width 180 (260) mm Sanding height max. 160 mm Dimensions (L/W/H) 3065x1600x1900 mm weight of the machine ca. 1500 kg LÖWER Leistomat SD ----- Automatic fine grinding machine for wood grinding (smoothing, defibering and Edge breaking) or intermediate sanding of profiled window bars. With soft disc Technology for the visible surfaces as well as automatically safe profile and Width adjustment. - 2 lamella roller units on the side, each 0.75kW, L=120mm, D=200mm 1 softisc unit Ø=200mm above 0.75kW, 1 slat roller unit L=200mm top 0.75kW, 1 soft disc unit Ø=200mm bottom 0.75kW, 1 slat roller unit L=200mm bottom 0.75kW, 2 lamella roller units on the side, each 0.75kW, L=120mm, D=200mm - Linear guidance of all grinding units Linear ball bearing sets on hardened shafts - time-controlled immersion of all lamella roller units directly above the incoming workpiece edges. By the It is possible to immerse the aggregates deeper into the profiles to be able to deliver. - Motorized workpiece thickness adjustment of the machine - variable grinding flap speed via frequency converter for adjusting the grinding intensity using frequency converters (separate for discs, surface rollers and side rollers) - Disc aggregates as soft discs with Velcro fastener for Grinding wheels (wood pulp) - Feed via three lower and one upper conveyor belts and Spring-loaded pressure rollers with infinitely variable speed 4-15m/min - Parameters that can be set using the touch panel are workpiece thickness, Workpiece width (left side units individually), immersion depth Side units, spindle speed, feed speed - Saving the parameters as machine programs in program mode - Working in automatic mode with non-contact Workpiece width detection and profile detection as well as automatic Adjustment of the sanding units to the workpiece width and the Profile shape (workpiece height is set in advance) - pneumatically clocked driven feed roller, automatic Clamping of the workpiece and feeding in after unit adjustment - Red/green indicator lights to indicate operational readiness - shortest workpiece length 380mm - Transport belt width 200mm - max. workpiece width 180mm (260mm in the envelope process) - Workpiece height 12-160mm - Suction connection 4 x 100mm and 2x80mm diameter - Sensor-controlled tool blow-off directly on the discs - Length (case) x width x height (mm): 3065x 1600 x 1900 Complete length: 4365mm (including roller conveyor with integrated workpiece width detection) - Weight: 1500kg - Operating voltage 400V, 50Hz, 3P, air connection 6 bar - CE version ----- Price of the above machine on request! ----- Special accessories with additional costs: Set of replacement slats for Leistomat SD-200 consisting of Area aggregates: 30 strips EH45 / 200 - 7 (rolls) 30 strips EH45 / 200 - 20 (rolls) Folding units: 96 strips M55 / 120 - 4 SmartFlex slat disc Ø200 solid with 30 grooves 50mm long Set of replacement slats for SmartFlex slat disc consisting of 60 strip M35 / 50 K 180-7 p Sandpaper disc VB for soft disc D=200mm grit 220 with velor backing (Velcro), pack of 100. Sandpaper disc VB for soft disc D=200mm grit 280 with velor backing (Velcro), pack of 100. Bdsdpfx Akjvnv Uhjlsf ----- Price of the above-mentioned special accessories on request! -----...

Condition: used, This listing is for the Cytiva AxiChrom 300/300 Chromotography collumn The unit is in full working condition and is ready for immediate use AxiChrom is a line of low-pressure, axial compression chromatography columns designed for process development and manufacturing of biopharmaceuticals. They are built for GMP‐compatible use, scalable from lab/ pilot to full production 300 mm inner diameter (i.d.) 300 mm bed height (column length) or related bed volume configuration Bdodpfx Aoxhdwysklsf Features Axial compression packing (intelligent packing): preprogrammed / automated methods for packing, ensuring reproducible bed density / performance. “Swing‑out” tube or movable adapters: for large diameters (≥ 300 mm), the column tube swings out to allow easier access to the bed supports, seals and O‑rings. Sanitization / Cleaning / GMP compliance: Parts (“wetted” and “pressure retaining”) are traceable by batch, and materials comply with USP Class VI, 21 CFR part 177, EMEA regulatory requirements. Cleaning and sanitization are feasible, including treatment with 1 M NaOH, with effectiveness for microbial and endotoxin removal. Flexible configurations: options for different bed heights (usually ~10‑50 cm for large diameters) and different bed support types