Used Syrup Room for sale (1,017)

Condition: good (used), Complete syrup plant with CIP and water preparation, installation connected with stainless steel pipes, valves, and pumps. Ijdeywnlcepfx Acpsbc

Condition: good (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 75080154.1/TKT 2, type of input current: three-phase, input voltage: 400 V, input current: 40 A, 30 C – FINN-CONVEY V307 Conveyor 3-Level Table System – Modular Cutting Room Conveyor Description For sale is a FINN-CONVEY V307 conveyor 3-level table system designed for textile cutting room operations. This system functions as a modular conveyor-based table solution for material handling and fabric movement within production. It enables efficient workflow between spreading, buffering, inspection, and cutting stages. The system has been operated as part of a fully integrated cutting line together with a Lectra Vectorfashion VT-FA-Q2-72 (unit 35 C). This integration significantly reduces manual handling and downtime, especially during fabric roll changes and feeding operations. The video material also shows a GERBER XLS-125-180-L Spreader (unit 32 C), which was used in the same production line. The equipment has been used in a professional garment factory and was operational prior to factory shutdown. Recently serviced on 27.02.2026. Includes • FINN-CONVEY V307 conveyor table system • Multi-level conveyor structure (3 levels) • Integrated belt transport system • Drive motors and transmission units • Sensor components for positioning and control • Electrical control cabinet Technical Details • Manufacturer: Finn-Convey • Model: V307 • Type: Conveyor table system • Application: Fabric handling and transport in cutting rooms • Configuration: Multi-level modular system • Levels: 3-level buffer structure • Power: Industrial 3-phase system Key Advantages • Full integration with automated cutting systems (Lectra line ready) • Reduced manual labor in fabric feeding and handling • Continuous material flow for optimized cutting efficiency • Modular system adaptable to different production layouts • Industrial-grade mechanical construction for long service life Production Efficiency The 3-level buffer structure allows continuous operation of the cutting machine by maintaining a constant material supply. This reduces idle time and enables • Higher throughput in cutting operations • Efficient batch handling • Improved workflow synchronization across production stages Build Quality Finn-Convey systems are known for their robust mechanical construction, designed for long-term industrial use. With proper maintenance, these systems are built to operate reliably for decades. Condition Used industrial condition Fully functional prior to shutdown Ibodpfxoy Akpze Acpjc Typical signs of use from production environment Inspection possible prior to dismantling Sold as-is, where-is, without warranty Typical Applications • Cutting room conveyor systems • Fabric transport and handling • Workflow optimization in garment production • Textile production lines Location: Valga, Estonia Removal & transport: Buyer responsible for dismantling and transport Professional dismantling recommended due to system size

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 530 022, type of input current: three-phase, input voltage: 400 V, Manufacturer: Deckel Maho Type: FP1 Aktiv-Digital – Heidenhain TNC 123 - 2102 Serial number: 530 022 Technical data • Control system: 3-axis Aktiv linear control Heidenhain TNC 123 • Lubrication: Automatic central lubrication system • Working area (X x Y): 300 x 260 mm (with a vertically adjustable milling head) Iedpfxjz Sqq Te Acpebc • Clamping surface (rigid angle table): 600 x 210 mm • Max. table load: 200 kg • Spindle speed: 40 – 2,000 rpm (high-torque direct drive with 8 gear stages) • Feed drive: Infinitely variable digital drive • Main spindle drive: High-torque, pole-switching three-phase brake motor • Measuring system: Direct position measuring system via glass scales in all axes (X/Y/Z) • Positioning accuracy: 0.005 mm • Table slots: 4 pieces of 12H7 slots at a distance of 45 mm Description For sale is a highly precise and versatile tool milling machine DECKEL FP1 in the popular Aktiv-Digital version. The machine is characterized by its compact design, extreme reliability and highest precision in tool, prototype and fixture construction. Highlights & Control System: • Heidenhain TNC 123: Very easy-to-use 3-axis digital display with active positioning (incremental chain measurement and absolute linear measurement). The control system has 20 programmable reference points. • Automatic central lubrication: For minimal maintenance and optimal wear protection, this machine features the valuable upgrade of an automatic central lubrication system. • Central operating convenience: All machine functions, such as infinitely variable feed rate, rapid traverse, motor brake on/off, spindle start/stop and coolant, are clearly arranged directly on the swiveling control panel. • Ergonomics: Mechanical, manual safety handwheels with scale ring in all axes ensure a sensitive response. Additionally, a handwheel scale for fine positioning and a linear scale as a coarse scale are installed. Flexibility in machining: • Vertical milling head: The head can be swiveled by ±90° and can be positioned precisely using a scale. An integrated quick-lock allows it to be quickly and precisely aligned vertically again. • Horizontal machining: The milling head is simply swiveled by 90° and moved backward. • Drilling quill: The vertical spindle has an integrated clamping mechanism and can be extended manually up to 60 mm for drilling operations. Safety: • The machine is equipped with an additional, easily accessible emergency stop button directly on the housing for optimal work safety. Condition & Accessories • Condition: Very good, well-maintained and ready for immediate use. Includes wiring diagram.

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, Deckel FP 1 MK with TNC 123, year of manufacture 1994, with CE marking. Spindle speeds: 40 - 2000 rpm, SK 40. Travel distances: X 300, Y 160, Z 340. Stepless feed rate + rapid traverse in all axes. Weight: approx. 880 kg. Accessories: Universal table, electric central lubrication system, coolant system, collet set, 5 tool holders, Röhm machine vise, swarf drawer. Condition: Original, not repainted, smooth operation at all spindle speeds and axis movements, and flawless guidance. Can be inspected while powered on. Ibsdpfxjzx Ep Sj Acpsc Free loading at D-88433 Schemmerhofen.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, DECKEL FP 4 MK Year of manufacture: 1992, with TNC 113 active digital control with positional programming Spindle speeds: 50 - 2500 rpm Travel ranges: X 500, Y 400, Z 400 Feed rate: stepless + rapid traverse Hydraulic tool clamping system SK 40 Hydraulic machine vice Allmatic 125 Universal table Central lubrication, electric, lighting, machine feet, coolant system. Condition: original, not repainted Smooth and quiet operation at all spindle speeds Guideways and axis movements are in perfect condition. Weight approx. 1500 kg Ibodpezxwz Tefx Acpsc Can be inspected while powered on. Free loading D - 88433 Schemmerhofen

Condition: used, Year of construction: 1978, x-travel 100 mm y-travel 200 mm z-travel 450 mm taper ISO SK 40 turning speeds 22 - 1400 U/min total power requirement 7,5 kW weight of the machine ca. 2,6 t dimensions of the machine ca. 1,8 x 2 x 1.85 m 3-axis digital readout - Rapid traverse - Documentation Ibsdpfxsz Rqpas Acpsc

Condition: good (used), Year of construction: 1990, 1 used universal tool milling machine Ibodpfx Acsz S Ubcopsc Manufacturer: Deckel, Type: FP 5 CC Year of manufacture: 1990 Control system: Dialog 11 X-axis travel: 800 mm Y-axis travel: 600 mm Z-axis travel: 550 mm Spindle speed: 25 - 6,300 rpm Tool holder: SK 40 Drive power: approx. 12 kW Machine weight: approx. 5000 kg

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, spindle speed (max.): 2,000 rpm, spindle speed (min.): 80 rpm, type of input current: three-phase, input voltage: 400 V, Equipment: rotational speed infinitely variable, Universal milling machine Deckel FP1 – Very good condition For sale is a Deckel FP1 universal milling machine in very good, well-maintained condition. The machine is equipped with a 3-axis digital display Heidenhain TNC 113 and stepless feed in all three axes. The Deckel FP1 is known for its precision, reliability and durability and is ideal for toolmaking, single-part production, repair work and training companies. Technical data Manufacturer: Deckel Model: FP1 Year of manufacture: 1985 Machine number: 15082 Spindle speed: 80–2,000 rpm Drive power: 1.6 / 2.0 kW Stepless feed in X, Y and Z axis Rapid traverse in all three axes Travel ranges (X/Y/Z): 300 / 160 / 340 mm Fixed angular table Vertical milling head on spindle head, adjustable by 100 mm Vertical and horizontal spindle with SK40 collet Clamping system: S20x2 Spindle brake Space requirement: 1.30 m x 1.10 m x 1.60 m (L x W x H) Machine weight: approx. 850 kg Equipment - 3-axis digital display Heidenhain TNC 113 - Hydraulic vise - Coolant system - Operating manual Ibsdpfxozlnmmj Acpec The machine is in very good technical and optical condition and is ready for immediate use. An inspection and a test run can be arranged at any time by appointment.

Condition: excellent (used), Year of construction: 2012, 455 USED Koma CDS cooling - proofing room. TECHNICAL DATA: - year of production: 2012 - temperature range: -12°C - +30°C EXTERNAL DIMENSIONS (in cm): - width 137 - wepth 260 - height 255 INTERNAL DIMENSIONS (in cm): - width 89 - depth 205 - height 200 The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. Ibedpszlm T Sofx Acpec We also offer bakery machines, bakery equipment, roll lines, bread lines, refrigerator and proofer. If you want to see our full current offer, visit our Bakeres profile.

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, overall weight: 1,650 kg, Table: 800 x 400 mm Longitudinal travel (X): 600 mm Transverse travel (Y): 400 mm Vertical travel (Z): 400 mm Maximum spindle speed: 3,150 rpm Feed rate: infinitely variable Display: HEIDENHAIN Workpiece clamping: hydraulic Iedpfxez Sqk To Acpjbc Very good condition – hardly used!

Condition: ready for operation (used), Year of construction: 1984, Immediately available from training center: MAHO Tool Milling Machine Model MH 600 Year of manufacture: 1984 Table: 700 x 400 mm Travel X/Y/Z: 500/400/400 mm Speeds: 40 – 2500 rpm SK 40 Spindle stroke: 80 mm Coolant system Ijdpfxsz Ixk Se Acpsbc Drive: 4 kW Feeds: 8 – 400 mm/rev Head swivels 90/90 degrees Weight: 1900 kg Price: EUR 2,250.-- plus VAT, ex location.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, CLEANROOM - ISO 8 | Cleanroom requirements ISO Class 8 | ISO Cleanroom Class 8 | Cleanroom classification. In order to achieve an ISO 8 air purity class in a Cleanroom, several levels of air filtration are usually used (e.g. G4 pre-filter, F9 filter, H13 final filter). Air movement in the room is non-unidirectional (there is a mixing of "clean" air supplied to the room with "dirty" air present in the room). Air vents in the ISO 8 room are placed on the walls. The required number of air exchanges per hour will depend on the nature of the activities conducted in the room and the number of personnel present, but the goal could be to provide 10-40 air exchanges/hr. In ISO Class 8, personnel are often present continuously. Employees may be dressed in standard work attire and visitors in a disposable apron. It is recommended to maintain a minimum overpressure of the room relative to the adjacent zone of 5-10 Pa. Requirements for equipment and materials intended for Clean Room with ISO air cleanliness class 8 (maximum average amount of particles released when: number of samples taken = 100; measurement performed in accordance with ISO 14644-14 in a cleanliness class at least one better than the purpose of the device; number of particles/m3) Detailed description in photos. Technical drawings attached to photos. Description of ventilation The purpose of the ventilation installation performed was to achieve the following air parameters in the Clean Room. The installation was made with the GBD PHARMA 2000 system, meeting all the requirements for 'clean rooms' in the highest classes of air purity. Parameters for the installation: a. Air purity - ISO 8. b. Temperature 19-23 st C c. Humidity max 38%. Ibedpfx Aceq H H Rujpoc a. To ensure the required purity of the supplied air, an air handling unit manufactured by DOSPEL with a maximum capacity of V= 3500 m3/h [up to 15 air changes per hour] was used. The air handling unit is equipped with pocket filters : pre-filters FK EU5/EC2 and fine filters FK-EU9/EC2. In addition, HEPA 11 filters made by EUFILTER were used in diffusers located in the ceiling. Data sheets in point H6. As a result , with a measured flow rate of 3264 m3/h, an ISO 7 [class "C"] cleanliness class of the room was obtained in the resting state, and thus an ISO 8 [class "D" ] cleanliness class for the working state. b. The temperature range of 19-23 deg C is for the enlarged cooler and chiller to be freely maintained with 25% fresh air. c. In order to achieve in summer conditions with high temperatures of 30 deg C and humidity of 80%, a freon chiller of 31.4 kW and a chiller of 33.5 kW of cooling power were used. The chiller is made by FUJITSU supplied by Klimatherm Gdansk. The room is automatically regulated overpressure in relation to the external pressure - the pressure difference at the door : 15 Pa The automation of ventilation allows for "economical" mode , in which the installation works in a closed circuit and an overpressure of 15 Pa is maintained. Technical data attached to the photos.

Condition: good (used), Year of construction: 1964, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 200 rpm, spindle speed (min.): 40 rpm, input frequency: 50 Hz, Manufacturer: Deckel Type: FP2 Tool holder: SK 40 Travel ranges X/Y/Z: 500 / 200 / 400 mm Speed range: (18 steps) 40 - 2000 rpm Spindle stroke, vertical: 60 mm Spindle stroke, horizontal: 100 mm Feed rates: 8 - 400 mm/min Table size: 700 x 300 mm Motor power: 2.2 kW Connection: 400 V / 16 A plug Weight: approx. 1300 kg Space requirement L x W x H, approx.: 1200 x 1250 x 1670 mm Head swivels: 90° / 90° Equipment: - 3-axis digital display Ibedsilg H Eepfx Acpjc - Coolant system We would be happy to demonstrate the machine in operation at your location. All information is subject to change without notice. Subject to prior sale.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, The machine is in very good condition and comes from a training workshop. Technical details x-travel 300 mm y-travel 160 mm z-travel 290 mm table surface area 600 x 210 mm tool taper SK 40 spindle turning speed range (16) 40 - 2000 rpm feeds -stepless- 5 - 500 mm/min Ibedpfoz Rpcrjx Acpoc rapid traverse 1,2 m/min spindle motor 1,5 / 1,9 kW total power requirement 9,5 kVA weight of the machine ca. 830 kg dimensions of the machine ca. 2000 x 2200 x 1655 mm Equipment: * 3-axis positioning control with active digital display Heidenhain TNC 123 - Manual mode: Manual operation and positioning with manual input - Automatic mode: Single-block programme run, programme storage * Fixed angle table * Movable vertical milling head, swivel range +/- 90 degr., quill stroke 60 mm * Coolant equipment * Central lubrication * Tailstock with counter bearing * Manual

Condition: good (used), Year of construction: 2014, Set of 4 modular office units, room-in-room system, two-story, including staircase, approx. 139m2 – used: Price ex-works: €19,950 (net), disassembled, packed, and loaded! Item no. 11: Manufacturer: Kleusberg Type: Systemraum Trendline Year of manufacture: unknown, likely 2014 Roof accessible, with a maximum load capacity of 100kg Element width: approx. 1.03m Length including staircase: total approx. 14.51m Width of “gap” for the staircase: approx. 1.27m Right block, top and bottom: Length: approx. 4.60m (4 elements and one narrow element) Left block, top and bottom: Length: approx. 8.64m (8 elements) Depth approx.: 5.28m (5 elements) Iedpfezqzuujx Acpebc Ground floor height: approx. 2.70m Total height approx. 5.40m 4 doors All offices are closed on three sides and therefore stand with one side against the hall wall Includes lighting, etc., as available Ground floor without flooring, upper floor with flooring Sale excludes furniture, etc. Condition: good Available: from approx. Q4 / 2026 Location: Hamburg

Year of construction: 1976, condition: good (used), Deckel FP1 tool milling machine, 3-axis Heidenhain digital readout, machine was overhauled by FPS years ago. Rigid table, SK 40 spindle holder vertical, SK 40 horizontal, accessories: various collets and milling arbors, counter holder, good working condition, paint is no longer so nice, can be demonstrated under power by arrangement. Ibjdpfjrhzcujx Acpec

Condition: good (used), Year of construction: 1973, Deckel FP2 tool milling machine with 2-axis Heidenhain digital readout, rigid table, SK 40 spindle holder. Long sliding milling head, accessories: various collets and milling arbors, counter holder. Good working condition, can be demonstrated under power by arrangement. Ibedjumclaopfx Acpsc

Year of construction: 2017, condition: good (used), Lillnord Combi Room refrigerated chamber - used - year of manufacture 2017 - freezer room for 18 pallets, 60 x 80 (minus 18 degrees Celsius) - refrigerated room for 4-5 pallets, 60 x 80 (plus 6-8 degrees Celsius) - disassembled and stored in a warehouse - good technical condition Iedpfxozn Iyls Acpsbc - external cladding made of stainless steel - internal cladding painted - collection from the warehouse - price on request

Condition: good (used), Year of construction: 1998, functionality: fully functional, overall weight: 1,650 kg, Table surface: 800 x 400 mm Travel ranges: Longitudinal travel (X): 600 mm Lateral travel (Y): 400 mm Vertical travel (Z): 380 mm Iodpfx Acjz N Et Repsbc Weight, approx.: 1.65 tons

Condition: good (used), Year of construction: 1998, functionality: fully functional, workpiece weight (max.): 200 kg, Universal machining center Manufacturer: MACMON Type: M 100 ADR Technical data: - Heidenhain TNC124 control system - Machine number: 7989 - Year of manufacture: 1998 - Travels: X 310 mm, Y 170 mm, Z 330 mm - Spindle speed range: 40-2500 rpm (continuously variable in 2 ranges) - Feed rate: 10-800 mm/min (continuously variable) - Rapid traverse rate: 800 mm/min - Equipment: Vertical and horizontal spindle (including lifting device for vertical spindle) - Table size: 600 x 215 mm - SK40 - Drive motor: 2.2 kW - Connected load: 5.5 kW - Weight: approx. 750 kg - Space requirement: 1000 x 1160 x 1400 Includes complete documentation Ibedpfxerwml Ae Acpjc All information without guarantee. Subject to prior sale.

Condition: good (used), Year of construction: 1975, Cover FP3L with.3-axis Heidenhain digital readout , rigid table , vertical milling head , SK 40 S20x2 spindle mount . Good working condition. Ready for demonstration under power by arrangement. Ibodpfouclbzjx Acpoc

Condition: like new (used), Year of construction: 2023, functionality: fully functional, total width: 5,150 mm, total length: 16,000 mm, total height: 4,850 mm, temperature: 2 °C, We are offering this like-new Heidinger I-1751 refrigerated storage room, manufactured in 2023. Type: I - 1751 Year of manufacture: 2023 Double refrigerated storage room, 2-8°C (unused) Each with a Viessmann double door, 2m x 2.7m Redundant design Internal dimensions approximately 16m (L) x 5.15m (W) x 4.85m (H) each Ibodpfxeykrtpe Acpec Walls made of 100mm sandwich panels No separate floor, therefore accessible with a forklift Compressors: 4x Bitzer Ecostar LHV5E/2DES-3.F1Y-40S Evaporators: 4x Güntner GACC RX 040.1/2WN/DJA4A.UNNN The refrigerated storage room was built for storing medication and has never been put into operation after acceptance by the manufacturer. The pallet racking shown in the pictures is not included in the offer. Dismantling and transport are the responsibility of the buyer. If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: good (used), Year of construction: 2014, Storage offices, room-in-room system, approx. 150 m2, several rooms – used: Price ex location: €19,500 (net), disassembled, packaged, and loaded! Item 8: Manufacturer: Kleusberg Type: Systemraum Trendline Iedpfszqzyqsx Acpsbc Year of manufacture: unknown, presumably 2014 Roof accessible for personnel, max. load 100 kg Element width: approx. 1.03 m Length: approx. 21.40 m Depth: approx. 7.60 m, or 8.10 m (6-7 elements) Height: approx. 2.96 m Several doors All offices are enclosed on three sides and are therefore positioned with one side against the hall wall. Includes lighting, etc., as available. Without flooring. Sale excludes furniture, etc. Condition: good Available: from approx. Q4/2026 Location: Hamburg

Condition: good (used), Year of construction: 1987, Mikron WF2SA machining center with a 3-axis Heidenhain Aktiv digital control system. Fixed angular table, SK 40 spindle mount. Ready for operation. Machine can be demonstrated under power by arrangement. Iodpfx Ajzvyh Decpebc

Condition: ready for operation (used), Year of construction: 2013, Make: Jungheinrich Model: EJE 220 Year of manufacture: 2013 Lifting capacity: 2000 kg Fork length: 1200 x 540 mm Includes internal charger Suitable for: refrigerated areas/cold storage rooms Are you only looking for a new battery? We can also supply those. Iedpsz Az Ivsfx Acpebc For more information, please contact us.