Used Syscona Syscona Expert-Fhk Crate Inspector (2012) for sale (3,217)

Condition: used, Year of construction: 2012, Overview  The crate control was built in 2012 by the German manufacturer Syscona. The percentage of foreign bottles at which the crate is rejected can be set. Technical details Capacity: 3,800 crates/h  Longitudinal run  Previously used formats: 12x 1L PET bottles  Inspection via camera  Including pre-belt and line distributor 230V/ 50Hz  Bodpfx Aoqc E I Rsf Relh

Condition: used, Year of construction: 2018, Overview  This fill level and closure inspection machine was manufactured in 2010 by German company KHS. The operation view will be done with the label inspection machine from Indspect. It is designed for checking the fill height, closure and label of full bottles. The machine was running until January 2025 and is now stored in the company. Technical data Capacity: up to 25,000 bph Scope of Delivery  Fill level and closure inspection system | KHS Label inspection system | Indspect Bljdpfx Afewhw Sgs Rsh

Condition: used, Year of construction: 2012, Overview  This empty bottle inspection machine was manufactured in 2012 by German company HEUFT. The Glas InLine reflexx IR is designed for quality control of empty glass bottles in high-speed filling lines. The machine is still installed with energy disconnected, stopped since September 2025, and can be visited on request. It is described as in very good condition and available immediately. Technical data  Capacity: Up to 72,000 bph Formats: 330 ml Application: Empty glass bottle inspection Flow direction: Left to right Operating hours: 48,121 h Blsdjyi Almjpfx Af Roh

Condition: used, Year of construction: 2012, Overview  This level & cap inspection machine was manufactured in 2012 by German company HEUFT. The SPECTRUM is designed for quality control of filled bottles, inspecting fill level and closure. The machine is still installed with energy disconnected, stopped since September 2025, and can be visited on request. Technical data  Capacity: Up to 43,000 bph Formats: 330 ml Application: Level & cap inspection on filled bottles Flow direction: Left to right Operating hours: 48,121 h Bsdpfx Afoyizzmo Rjlh

Condition: used, Year of construction: 2019, This empty crate inspection system was built in 2019 by the German manufacturer Indspect. The machine is until October 2025 in running production. Technical data Capacity: Adjustable For the inspection of damage empty crates Bjdpfxoyhmzpj Af Rjlh

Condition: used, Year of construction: 2017, Overview The Crate inspector was built in 2017 by Germany manufacturer Visiontec. It is adjusted for 0,5l glass bottles and twenty modul crates. The inspector comes with a multi camera system. If an external bottle is detected, the crate will be pushed out in another line. Currently the setup is for a long side leeding crate. Blodpsl Hx Ibjfx Af Rsh

Condition: used, Year of construction: 2017, Rotary indexing table Manufacturer: Expert Tünkers Type: EDX810/0250/8 Blsdpfsyl Swwex Af Reh Year of manufacture: 2017 8-station table (45° increments) 3626

Condition: used, Year of construction: 2026, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 2026-078, working width: 1,600 mm, working height: 100 mm, cutting width (max.): 1,600 mm, number of slots in tool magazine: 2, Used machine CNC cutter/plotter Cutting area in X and Y: 1,500 x 1,600 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials Equipment of the used machine. • 1 cutting bridge and 1 Multifunctional tool head • max. material height 100 mm • Multifunctional tool head to hold 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration • Milling Head + exhaust Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: Bledpfowgc I Rex Af Roh • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 45 h, machine/vehicle number: 202023-062, Multifunctional CAM cutting system in pure waterjet technology - without abrasives (waterjet cutting system / water cutting system) 2 cutting bridge with 2 cutting heads including Z-axis 1 head 2D cut 1 head 2D cut For cutting foam, plastic, technical textiles and other flat, flexible, non-metallic materials Maximum feed-through height: 140 mm Cutting area in X and Y: 28500 mm * 2750 mm Protection class: IP54 incl. used high-pressure pump BFT Ecotron 40.22 (650 operating hours) (Product photo as an example) The machine is CE-certified. Bledpfx Afswrn Iyo Rsh

Condition: used, Year of construction: 2023, operating hours: 45 h, machine/vehicle number: 202023-078, Multifunctional CAM cutting system in pure waterjet technology - without abrasives (waterjet cutting system / water cutting system) 2 cutting bridge with 2 cutting heads including Z-axis 1 head with angle cutting function 1 head 2D cut For cutting foam, plastic, technical textiles and other flat, flexible, non-metallic materials Maximum feed-through height: 140 mm Cutting area in X and Y: 28500 mm * 2750 mm Protection class: IP54 Blodpfx Aefhgvwjf Reh incl. high-pressure pump BFT Ecotron 40.22 (Product photo as an example) The machine is CE-certified.

Condition: used, Year of construction: 2026, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 204065, Used machine CNC cutter/plotter Cutting area in X and Y: 2,500 x 2,100 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials. Equipment of the used machine • 1 cutting bridge and 1 multifunctional tool head The machine is sold with one driven circular knife, electric oscillating knife and one Milling Head + exhaust • Multifunctional tool head to hold max. 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Green-blue exchange conveyor possible (offers high contrast for dark materials) Can be extended with other tools (on request): Blsdjif Ek Repfx Af Reh • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 2002-045, Used CNC cutter/plotter Cutting area in X and Y: 2,500 x 2,100 mm Multifunctional CAM cutting system with CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam, and other flat, semi-flexible, or rigid, non-metallic materials Equipment of the used machine: • 1 cutting bridge and 1 multifunctional tool head The machine is sold with a CCD camera for detecting print marks • Multifunctional tool head for holding 2 interchangeable tools • Powerful vacuum blower for fixing the material • Equipped with gray conveyor belt table as standard. Green-blue replacement conveyor available (provides high contrast for dark materials) Additional tools are available (on request): • EOT electric oscillating knife • POT pneumatic oscillating knife • PRT driven circular knife • UCT universal knife (pull knife) • KCT kiss-cut tool Blodpfx Afjfnlkws Reh • CTT creasing tool • V-cut angle cutter • Printer mark recognition • Camera registration • Punching tool for notches or holes • Milling cutter with suction device User-friendly • Easily replaceable cutting tools, “PLUG & CUT” • Intuitive user interface • Easy blade replacement • Vacuum zones can be activated with a click Fast amortization • Low costs with high added value • Optimal material utilization thanks to nest expert software modules (not included in the equipment) • High speed • Consistent precision Data: • Short cutting times thanks to high positioning speed of up to 90 m/min • Repeat accuracy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both sheet material and roll material (can be expanded with a suitable unwinder) • Fast amortization (Product photo as an example) The machine is CE certified.

Condition: good (used), Year of construction: 2012, TruBend 5050 Bledoy Shcdspfx Af Roh

Condition: like new (used), Year of construction: 2012, operating hours: 46,000 h, functionality: fully functional, clamping force: 1,500 kN, Arburg Golden Edition 470-1500-400 from 2012 In perfect technical condition Injection unit: Screw diameter: 40 mm Injection weight: 180 g Injection pressure: 2000 bar Tie bar distance: 470x470 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Blodpsy Iupiefx Af Roh Additional equipment: The machine is in excellent technical condition Operating hours: 46,500 h in automatic mode Robot interface Color dosing unit interface Hydraulic core pull x 1 Reinforced injection units – bimetal Air x1

Year of construction: 2013, condition: good (used), Bastra / Bayha & Strackbein G.M.B.H. Crate Washer • Type: 074-DSKM • Serial number: 05386 • Year of construction: 05/13 • Power 400 V, 14.8 kW • Electric heating • Adjustable thermostat control for water heating • Detergent / soap dosing pump • High pressure wash system • Rinse facility Blsdpfx Afoyx I T Aj Rsh • Stop / Start control panel with reset facility • Wash opening clearance: 510mm W x 440mm H • Belt width: 400 mm • Machine dimensions: 2500mm L x 860mm W x 1470mm H

Year of construction: 2024, condition: ready for operation (used), This EXPERT cut Expert ecocam 2 was manufactured in 2024. It features a high positioning speed of 90 m/min and can handle cutting heights up to 100 mm. The machine operates on a PC-based NC software and supports various tool options including electric oscillating knives and driven circular knives. Ideal for cutting leather, textiles, and foams. For more information about this machine, please reach out to us. Machine Benefits Technical Machine Benefits • Positioning speed: 90 m/min / cutting height: standard: up to 50 mm / special version: up to 100 mm / repeat accuracy: ±0. 25 mm / precision: 0. 1 mm • Material layers: single layers or low layers • Electrical requirements: operating voltage: 400 vac, 50/60 hz / current: 63-125 a / control: pc-based nc software / compressed air: standard: 6. 0 bar / 200 l/min / for pneumatic knives: 8. 5 bar / 600 l/min • Working area (standard sizes): maximum size: 7500 x 3200 mm / further options: 3500 x 2100 mm, 5500 x 3200 mm, etc. / customization: customer-specific sizes possible Bledpfx Afjx D Nnpj Roh • Tool options: fot: electric oscillating knife (up to 15000 oscillations/min) / prt: driven circular knife (up to 11000 rpm) / kct: kiss-cut tool (gentle on the surface) uct: universal cutter (tangentially controlled) / v-cut: angle-cut knife / milling head: with suction device • Nest expert: optimum material utilization / pattern expert: cad template management / order expert: erp connection (e. G. , sap) / pick-up expert: visual sorting aid • Areas of application: cutting of leather, technical textiles, foams, plastics, rubber, composite materials, prepregs, sealing materials, foils, cardboard

Year of construction: 2015, condition: repair required (used), functionality: limited functionality, total length: 13,000 mm, total width: 4,520 mm, total height: 2,550 mm, machine/vehicle number: 201507-025, WATERJET CUTTING MACHINE & BONDING STATION: The system is part of a larger production line; please also refer to our other listings. In this offered system, EPS/XPS raw panels (manually loaded in the feed magazine) are bonded end-to-end into a continuous strand. Subsequently, formatting is carried out with the waterjet cutting machine, including cut-outs and groove milling. An ejector station and belt conveyor at the end of the line are also included in the scope of supply. RAW MATERIAL DIMENSIONS: Bledsytp U Aepfx Af Roh Length: 1500mm - 2500mm Width: 600mm - 1250mm Height: 20mm - 50mm WATERJET CUTTING MACHINE: cut Expert variojet (Manufacturer: expert international GmbH, formerly expert systemtechnik GmbH) INCLUDES: Adhesive unit (Nordson), milling spindle (Jäger)

Condition: ready for operation (used), Year of construction: 2020, A water jet cutting system Expert Systemtechnik with a high-pressure pump BFT is available. 1) Cutting system Expert Systemtechnik cutEXPERT variojet, year of manufacture: 2020, product: leather/foam materials/technical textiles/rubber materials/composite materials/packaging material, max. cutting speed: 70m/min, repeat accuracy: +/-0.2mm, water consumption: approx. 0.2l/min, cutting dimensions X/Y: 1800mm/3000mm. 2) High-pressure unit BFT Servotron 40.45+, year of manufacture: 2020, drive power: 45kW, max. flow rate: 4.6l/min, design pressure: 4200bar, max. operating pressure: 4000bar. Machine dimensions X/Y/Z: approx. 2000mm/1000mm/1400mm, weight: approx. 1200kg. Documentation available. An on-site inspection is possible. Blodpfjxmkcmjx Af Roh

Condition: used, Year of construction: 1990, Expert Eda450 Size of table plate 450 mm weight of the machine ca. 380 kg +++++ Please note: Bledpfx Aef Nlrqef Rsh The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: excellent (used), Range of measuring tools, calipers Bodjw Tb Dpjpfx Af Rjlh Mitutoyo 571-203-10 digital depth gauge, measuring range 300mm Garant 412601/150 digital caliper (manufacturer likely Mitutoyo), measuring range 150mm Unknown-brand digital caliper, measuring range 150mm Expert analog caliper, measuring range 300mm Batteries have been replaced or are in good condition. The measuring tools can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse—see "more offers from this supplier."

Condition: new, Year of construction: 2021, EXPERT EL390/1301 Blodpfx Afeu Hklcj Reh Vertical linear axis for loads with a total weight of up to 2000 kg per unit Year of production: 2021 More units available

Condition: new, Year of construction: 2021, Expert EL390/1301 linear positioner - 8 pcs. Travel distance 8000 mm. Bsdjtuv Ikopfx Af Rjlh Length 9000 mm. never used

Condition: used, Depalletizer and Palletizer – Flema Star C-LC For NRW and Euro crates as well as Euro and beer pallets, 500 crates/hour, Year: 1996, empty crates in from left, full crates out to the right. Crate Unpacker – RICO UNO 1-Head Type 124 For NRW and Euro crates, head suitable for Euro 0.5l, NRW 0.5l, and Ale 0.33l/0.5l bottles, 350 crates/hour, Year: 2010, right-to-left operation. Bottle Cap and Cork Remover – ADELSKI Type PPE 2005 For NRW, Euro, and Ale 0.5l bottles, 2,000–12,500 bottles/hour, Year: , Operating hours: 8,500, right-to-left operation. Bottle Washer – PAC CB 14-0.5l-R-7 LII Compact For NRW, Euro, and Ale 0.33l and 0.5l bottles, 7,500 bottles/hour, Year: 1998, Machine No. 125, Operating hours: 14,175. Bottle Inspection – SYSCONA LC 10 FD Bsdjxyt Npspfx Af Rjlh Caustic control + metal detection, Year: 2007. Filler – ICS multiFILL-VST (EP) 960-24-240-6KK-6SV-125.6 For NRW, Euro, and Ale 0.33l and 0.5l bottles, incl. product pump, 6,000 bottles/hour, Year: 2011, Operating hours: 7,200, right-to-left operation. Labelling Machine – ANKER Roland 8/3 For NRW, Euro, and Ale 0.33l bottles, 7,000 bottles/hour, Year: 1998, Operating hours: 14,500, left-to-right operation. Inkjet Printer – Keyence MK-G1000 Year: 2022, currently configured for date coding on rear label of ANKER Roland 8/3. Crate Packer – RICO UNO 1-Head L-Machine For NRW and Euro crates, head suitable for Euro 0.5l, NRW 0.5l, and Ale 0.33l/0.5l bottles, 300 crates/hour, Year: 2012, left-to-right operation. Premixer – Jakü PM-E-30-2k For degassing and carbonation, with product tank and 2K Bran+Lübbe pump, 35 hl/h, Year: 1992. Crate Washer – RICO 2500 1-Bath For NRW and Euro crates, 600 crates/hour, Year: 2012, right-to-left operation. 2 CIP Tanks, each 6 hl Steam-heated for filler CIP, with disk change system, Year: 2012.

Condition: used, functionality: fully functional, machine/vehicle number: I-109052, overall weight: 1,360 kg, The Expert Tünkers rotary table ET920/00067/flex is a versatile and powerful solution for precise positioning and automation in industrial manufacturing processes. Its flexible design enables efficient rotation and alignment of workpieces, optimizing production flows and increasing accuracy. The rotary table is characterized by its robust construction and reliable functionality, ensuring a long service life even under demanding conditions. Bodpfxjwrpt Rs Af Rjlh

Condition: good (used), functionality: fully functional, Technical details: SEW motor Type: DV132H8/4BH/HF/TH rpm: 700/1450 IP:54 Hz: 50 400V AC Brake: 400V kg: 83.94 Bedpfewu Dbbox Af Rolh The SEW motor with rotary table is a powerful and versatile drive solution, ideally suited for precise positioning and automation tasks. The motor stands out due to its robust construction and reliable operation, ensuring stable and efficient performance. The integrated rotary table allows flexible and accurate control of movement sequences, making it particularly suitable for use in manufacturing and assembly applications.