Used Tähkä Oy, Finland 230X300 for sale (442)

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, Chips and bark sorting screen, screening area 6,7 m2, el.motor 3 kW, capacity up to 150 m3/h, delivery includes metal frame. Bjdpfx Ahswktyfsmeln

Condition: ready for operation (used), Year of construction: 2005, Log turner Tähkä, infeed-outfeed conveyors, log correction hydraulic crane Loglift 105 Blsdpfx Aoy Dpmhehmjn

Year of construction: 2015, condition: excellent (used), functionality: fully functional, Technical specifications for the bale opening line for RDF, MSW, paper, and cardboard: Manufacturer: Cross Wrap Oy Ltd., Siilinjärvi, Finland Type: BO 4000 Year of construction: 2015 Number of bales opened: 674 Operating time: only 3 days, exclusively during the initial commissioning of the entire system upon new installation Opening time: approximately 45 seconds per bale Bale dimensions (W x H x L): 1100 x 1100 x 1400 – 1900 mm Max. bale weight: 2,000 kg System conveying height: 1,400 mm Max. system conveying width: 1,200 mm Material to be opened: RDF/MSW System availability: 98% Noise level of the bale opening line: 85 dB(A) Total connected load: 37 kW Rated current: 125 A Control panel: SIEMENS SIMATIC HMI Touch Controller: SIEMENS S7 ET200S Installation dimensions: 8,463 x 2,890 x 3,960 mm (L x W x H) Scope of supply: Infeed conveyor: 3,500 x 1,200 x 1,400 mm Feed conveyor to the opener: 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in the hydraulic oil tank Control cabinet heating Oil cooler for hydraulic unit Explanation for the short operating time: Bodpfx Aozp H R Eshmoln The entire Cross Wrap bale opening line, type BO 4000, was installed in 2015 at a municipal waste incineration plant. The reason for installing the system was to ensure that municipal waste could continue to be accepted, compressed, wrapped, and stored even during an operational disruption or maintenance of the incineration plant until the disruption was resolved. Subsequently, all the bales were to be opened again, and the waste fed into the normal incineration process. This worst-case scenario never occurred. The system was installed, commissioned, and then never used in normal operation. Only during the commissioning and initial operation of the entire system in 2015 were 674 bales opened over three days. The system is in very good condition and is immediately ready for operation. Due to restructuring measures in the incineration plant, the installation space of the bale opener was needed. This means that the complete line is now available for sale. Brief description of the bale opening process: The compressed bales are placed on the infeed conveyor from the side or from the rear using a forklift. To open the bales, they must be positioned horizontally to the conveyor with the wire or twine binding; otherwise, the bales must be rotated by 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or the twine binding. The rotating knife cuts the bale lengthwise. After that, the gripper returns to its starting position. The opened bale is now conveyed via the conveyor to the discharge chute and then falls onto the subsequent conveyor system. Remarks: New price of the complete system: €296,000. The documentation (operating manual, CE declaration, electrical/hydraulic circuit diagram) is complete. The system has been dismantled into transportable units, stored, and is available for inspection and loading in the short term. We assume no liability for the technical data or any potential errors.

Year of construction: 2007, condition: good (used), functionality: fully functional, Paint drying chamber MEYER AB / Fanmet OY 17m3 Year of construction 2007 )2009 installed ) Manufacturer MEYER OY Finland was used for drying lacquered furniture parts. Feeding with tray trolleys Length 3600mm width 2150mm Bjdpett Sy Rsfx Ahmsln height 2200mm approx. 17m3 electric heating total power 30 kw 18 heating units, each with 1667W, 400 V (length 2360mm) Air flow: 3m3 /sec or 10,000m3 /hour Inner cladding galvanized sheet steel 2 VEM fan motors ( 3,6kW+0,37kW ) ATEX Thermostat 0-120C Overheating protection 0-210C ATEX compliant 94/9/EC CE marked

Year of construction: 2020, condition: used, Manufacturer: Rocla Oy (Logisnext Group, Finland) Type: Automated Guided Vehicle (AGV) – counterbalanced model with bale clamp (AWTsc) Industrial Applications: Automated handling of bales, rolls, pallets or cylindrical loads in paper mills, packaging plants, logistics hubs, and automated warehouses. Designed for 24/7 operation in narrow aisle and high-density racking systems. Bljdpfxjw Ec Eae Ahmon Main Technical Specifications: - Model: AGV AWTsc – 40TF8300E - Year: 2020 - Nominal capacity: - 3200 kg at 760 mm load center - 6400 mm lift height - Battery type: 420 Ah - Unladen weight: 4520 kg - Power supply: 24 V DC - Rated power consumption: 6.8 kW - Drive control: fully automated - Turning radius: compact for narrow aisles - Safety equipment: - 360° laser scanners - Obstacle detection sensors - Intelligent automatic braking - Control interface: centralized software-managed fleet system - Autonomy: ~8–16 hours (depending on battery configuration) Machine Usage The Rocla AWTsc is a heavy-duty AGV designed to handle bales or rolls without pallets using its integrated clamp. Its counterbalanced design enables rack access without side supports. It is ideal for environments requiring precise, repetitive handling of cylindrical loads and provides fully automated operation with zero human intervention. Features / Differentiators - Bale clamp attachment for direct roll/bale handling - Full autonomy with intelligent fleet control - High load and lift capacity (up to 3200 kg at 6.4 m) - Advanced safety package included as standard - Suitable for high-density and narrow aisle operations - Integrates easily with warehouse management systems (WMS)

Condition: used, Year of construction: 2015, ALLU DS 4-12 bucket separator / screening bucket – manufactured in 2015 – 2,070 kg. For sale: an ALLU DS 4-12 bucket separator/screening bucket, manufactured in 2015. High-quality Finnish ALLU attachment for processing a wide variety of materials directly on the construction site. Technical data: * Manufacturer: ALLU Finland Oy * Type: DS 4-12 * Year of manufacture: 2015 * Serial number: DS41215444 * Weight according to nameplate: 2,070 kg * Recommended hydraulic oil flow: 95–160 l/min * For excavators approx. 20–35 t * 4 drums Blodpfxez Dm Nbs Ahmon * Robust heavy-duty design Possible applications: * Sieving soil and topsoil * Construction rubble and recycled materials * Gravel and sand * Compost and biomass * Processing and separating soil material * Depending on the shaft configuration, also crushing and mixing The ALLU D series is designed for sieving, crushing, mixing, aerating, and loading material. Condition: used, with signs of wear and tear commensurate with its age. Inspection possible by appointment.

Condition: ready for operation (used), Log infeed line Tähkä, equipped with a lower device for turning logs Bledjxg Rvgjpfx Ahmsn

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, We are Penope Oy and we provide solutions for industry in Finland but also worldvide. We are official Makor dealer in Finland. Technical specs: Very little used vacuum extuding machine, year 2023. IN FEEDER FOR VACUUM mod. TEP 2000 reinforced version The in feeder, which is integral part of the vacuum coater, is equipped with high adherence belt and piece side guides. It is use to properly feed profiles in the vacuum head. TECHNICAL DATA TEP 2000 for vacuum Max. working width mm 220 Working height mm 850±30 Feed speed m/min 25÷150 Feed motor power (with inverter) kW 0,55 VACUUM EXTRUDING MACHINE mod. STORM WB Blsdpfjtqu Diex Ahmsn Vacuum extruding machine for applying water base paints, designed in stainless steel plate (inox) and anti-adherence material. The machine is complete with a “cutting down” unit which allows a high reduction of the polluting emissions and a complete recovery of the excessive paint in order to reduce the consumption of paint to the minimum. PAINTING Extruding head realised in anti-adherence material. The head is complete with an adjustable profile guiding system, with paint adduction distributors. All the inner components are easily taken apart for a quick cleaning. A double diaphragm pneumatic pump with high capacity, transfers the paint from the tank to the extruding head, complete with a basket filter in stainless steel (inox) and an anti-pulse device for the interruption and feeding of the product. AUTOMATIC FILLING SYSTEM Automatic filling system for automatic decanting of the product directly from the paint drum to the tank of the machine. The system is also provided with an acoustic alarm in order to signal decrease of paint level inside the tank. Thanks to this system it is possible to maintain in circulation a minimum quantity of the product. CONTROL PANEL General electrical switch-board which is integral part of the aspiration tower equipped with control panel for the start-up and the control of the machine. Two vacuum indicating gauges for the control of vacuum degree and of loss of filter efficiency. TECHNICAL DATA STORM WB Compressed air consumption (~5 bar) nl/min 1500 Working height mm 870 +/-30 Turbines capacity (each) mc/h 470÷600 mbar 200÷250 Turbine motor power x 3 Kw 11 AUTOMATIC PRE-WASHING SYSTEM The automatic PRE-washing system allows a quicker product change or an easier maintenance of the machine. The cycle consists of the following phases: 1) Through a three-way valve the feeding pump sends the remaining product to an external container till the tank is completely empty. 2) Through hydric plant (at customer’s charge) the product tank is filled with water. 3) Turbines are activated while the previous three-way valve goes back to working position so that the feed pump can send in circulation the clean water for a defined time necessary for the washing. 4) The three-way valve goes back to discharge position and the tank is emptied by the washing water. 5) The automatic filling system activates for the new product.

Condition: new, Description: EPCOS B43586-S3468-Q3 DC-Link Capacitor Kit – 9 Pieces Bljdez D S I Nspfx Ahmjn Original EPCOS DC capacitors, supplied as a complete kit of 9 pieces. Technical details: Manufacturer: EPCOS Type: B43586-S3468-Q3 Capacitance: 4600 µF Rated voltage: 385 V DC Quantity: 9 pieces ABB code: 68405513 ABB description: DC-CAPACITOR ABB reference: B43586-S3468-Q1 / 9PC Originally supplied for: ABB Oy, Drives Finland The capacitors are supplied in their original, divided packaging, as shown in the pictures. Condition: Surplus stock. The complete kit is sold as-is, without warranty or guarantee. The buyer is responsible for verifying compatibility and suitability for the intended application. Price: On request / open to offers.

Condition: excellent (used), Year of construction: 2014, operating hours: 5,100 h, functionality: fully functional, type of input current: three-phase, Signode (Haloila) Octopus Compact – Automatic Pallet Stretch Wrapper (2014) Manufacturer: Oy M. Haloila Ab, Finland (brand now part of Signode) Model: Octopus Compact Year of manufacture: 2014 Type: Automatic pallet wrapping machine (rotary ring – load remains stationary) Compliance: CE marked Description For sale: Signode / Haloila Octopus Compact automatic pallet stretch wrapper. This is a rotary ring system where the pallet stays stationary while the wrapping ring rotates around the load. This design is particularly suited for light and unstable loads, as the pallet does not rotate during the wrapping process. Electrical specifications (from rating plate): 3~ 400 V, 50 Hz Power: 7 kW Current protection: 3 × 14 A Delivery / Incoterms EXW / FCA / DAP terms available. Loading and transport can be arranged upon request. Further information on request Photos and videos of the machine in operation, transport dimensions/weight, and the precise equipment configuration (conveyors, safety fencing, automation interface, options) are available. Contact: Please send a message for full details and a quotation. Bjdpfxoyhw Hpe Ahmoln

Condition: new, Year of construction: 2026, machine/vehicle number: Bull30_2, functionality: fully functional, operating hours: 1 h, pressing force: 250 t, stroke length: 270 mm, reverse speed: 40 mm/s, table width: 3,200 mm, total length: 20,000 mm, total width: 40,100 mm, total height: 32,000 mm, overall weight: 16,000 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 3,200 mm, working width: 3,100 mm, back gauge: 600 mm, back gauge speed R-axis: 100 mm/s, back gauge travel distance R-axis: 250 mm, back gauge travel distance Z-axis: 3,200 mm, distance between stands: 3,200 mm, height adjustment type: electric, mount diameter: 3,100 mm, rapid traverse X-axis: 500 m/min, rapid traverse Y-axis: 40 m/min, space requirement height: 3,500 mm, space requirement length: 2,000 mm, space requirement width: 4,010 mm, travel distance R-axis: 250 mm, warranty duration: 36 months, working length: 3,100 mm, Equipment: safety light barrier, Electric press brake Bull30 CoastOne Oy - Made in Finland Spindle drive - 5 controlled spindles Directly controlled crowning in the upper beam Pressing force: 2500kN Bending length: 3100mm Light barrier: Lazersafe IRIS Tool clamping: WILA hydraulic Backgauge: X-R-Z1-Z2 controlled Control: TC15-2D graphics control Front support arms, height adjustable and foldable Work light at the front and in the stop area Price and delivery time on request Further equipment options on request Warranty: 36 months after installation Blodpfoy A Nluox Ahmen

Year of construction: 2003, condition: used, wood chip sieve Bodpsx Ta Nfefx Ahmoln

Condition: good (used), Year of construction: 2005, Gardner Denver ES 22-10 Air Compressor with Pressure Air Receiver Tank. Manufacturer: Gardner Denver Model: ES 22-10 Compressor type: Rotary screw compressor Year of manufacture: 2005 Maximum pressure: 10 bar Motor power: 22 kW Rotational speed: 2780 rpm Weight: 628 kg Bjdpfx Ajx Tctgshmjln Electrical supply: 400 V / 50 Hz CE marked Air Receiver Tank Manufacturer: Galvanoimis Oy Location: Pirkkala, Finland Year of manufacture: 2005 Tank specifications (according to nameplate): Maximum allowable working pressure: 10 bar Test pressure: 14.3 bar Volume: 1800 liters Maximum internal temperature: +50 °C Minimum internal temperature: −40 °C CE marked General Good maintenance and service history Air dryer included. 2 similar sets available. Industrial compressor package suitable for workshop or production use. Compressor and tanks manufactured in Finland. 📩 Contact for availability and delivery options.

Year of construction: 2019, condition: used, We offer this used Megatrex ATREX CD1000 G600 continuous grinding, mixing and dispersing unit (high-shear rotor system). Manufacturer: Megatrex Oy Bjdpfxoy Eyv Ao Ahmoln Model: ATREX CD1000 G600 Serial number: 4255 Year of manufacture: 2019 Condition: used Category ID: 507 Machine type: Continuous industrial mixer / disperser The machine is currently equipped with a 355kW motor and a compatible variable frequency drive. If the buyer plans to install a larger motor, we can also sell the machine without the motor and vfd. The equipment is located in Lohja, Finland, and is currently not connected to utilities, i.e., is ready for transport. If you have any questions or need more information, feel free to send us a message or give us a call.

Year of construction: 2023, condition: new, SAMMET On/Off Damper 1000×500 mm Rectangular Section Industrial Damper – SAMMET® On/Off Damper Equipment designed for binary control (open/close) of air or process gas flow in high-demand industrial installations (power plants, FGD, incineration, dedusting, hot process, isolation systems). Manufacturer: SAMMET Dampers Oy (Finland) Model: On/Off Damper Serial number: 23012‑2129534 Year of manufacture: June 2023 Compliance: CE – Full nameplate present Nominal section (rectangular DN): 1000 × 500 mm Total weight: 164 kg (reinforced steel structure) Construction: welded steel frame, industrial-grade sheet metal, peripheral flange Actuation type: Mechanical On/Off with installed actuator Blade type: Reinforced rectangular blade (central shaft) Bljdpoyhxmzjfx Ahmon Closing method: Full shut-off (shut-off type) Main material: Industrial painted carbon steel Sealing: Standard design for air/gas isolation (not 100% gas-tight) This damper is particularly suitable for installations requiring reliable on/off isolation, such as: - Hot air or gas circuits - Combustion or incineration plants - Dedusting / filtration / FGD systems

Condition: ready for operation (used), Year of construction: 1990, MARKON Log house drilling machine with undercutter year 1990 manufacture Markon Lathi / Finland Length = 3550mm Width= 1500mm Height= 2910mm Engine power Drilling unit: 6 x 3 kW moulder: 1 x 5.5 kW Dimensions of the log to be pushed Height max 250mm Height min 130mm Width max 250mm Width min 60mm Length min 600mm Tool sizes and speeds Drill max diameter 40 mm Moulder max diameter 250 mm Drill length 325 mm Drill mounting arm diameter 20h7 mm Drill rotation speed 2880 rpm Moulder: rotation speed 2880 rpm AIR Bjdpfx Ahefw Rt Rjmoln Suction openings dia. 160 mm 2 suction openings Drill unit suction opening diameter 90 mm Suction openings 6 pcs Air speed at the suction opening 30 m / s Air consumption 8460 m3 / h electrical connection Total power 380 V 24 kW Compressed air connection Minimum pressure 6 bar Drilling unit air demand / stroke "48 1 Total air demand ~ 2200 1 / min incl. 3,5 meter roller conveyor + 12 drillings

Condition: used, functionality: fully functional, Foundry factory for sale, Property includes 15 buildings, 6 hectares of land. Located at the Karhula industrial site next to the city of Kotka in southeastern Finland, Karhulan Valimo was founded in the 1880’s. In 1902, the foundry was merged with a wood grindery, glass factory, brick factory and engineering works to form the Karhula Oy. In 1915 the Karhula Factories were sold to Ahlström Corporation. The current Foundry was built in 1960 and in 2000 Ahlström sold the foundry to Sulzer Pumps Finland. In 2016 Sulzer Pumps decided to close the foundry and it was sold to Karhulan Foundry Oy, which was unfortunately declared bankrupt in March 2021. Throughout its history, the Bjdpfx Ahjuxmt Tjmsln foundry has been known of been able to produce highly demanding castings particularly in high alloyed steels. In 2022 Karhu Assets Oy bought the facilities and machinery of the foundry. Most of the equipment in the fettling shop has already been sold, while most of the machinery in the moulding department and meltshop are intact and available. All heat treatment furnaces, a total of 10 units, are in place and available for sale. Welcome to visit on the site! The equipment is located in Kotka, 48600, Finland, and is sold EXW Kotka in its current condition. The flight time from most European cities to Helsinki, Finland, is approximately 2 hours, and the drive from Helsinki to Kotka via the motorway is about 120 km (1 hour). You are welcome to visit us in person to inspect the foundry machinery! Second-Hand Condition: All machines, equipment, and articles are sold in a used condition. No Warranty, Exchange, or Guarantee: The seller does not offer any warranties or guarantees on the items sold. There is no option for exchange or refund, so the buyer accepts any risks associated with the purchase. As Inspected On Site: The buyer must inspect the goods on-site before making the purchase, as the sale is final once inspected. The seller will not be held responsible for any defects found after the purchase.

Year of construction: 2022, condition: excellent (used), functionality: fully functional, We are Penope Oy and we provide solutions for industry in Finland but also worldvide. We are official Biesse dealer in Finland. Vacuum blocks for Biesse CNC-machine. 130x140 h75 18 pcs 125x75 h75 8 pcs 120x50 h75 10 pcs Very good condition, only tested and then stored. Price is for whole package, 36 pcs. Bsdpfju T D Iuox Ahmeln

Condition: new, Year of construction: 2026, functionality: fully functional, total height: 2,593 mm, total width: 2,700 mm, type of input current: three-phase, warranty duration: 24 months, power: 6 kW (8.16 HP), input voltage: 400 V, compressed air connection: 6 bar, volume flow: 15,000 m³/h, filter area: 45 m², sheet thickness steel (max.): 2 mm, High Efficiency Powder Coating Spray Booth "HELSINKI"/ Powder Recovery Booth / Powder Coating Extraction Unit Industrial powder coating spray booth with high-efficiency powder recovery system, German IE5 fan technology, automatic pulse jet filter cleaning, and variable airflow control. Designed for professional powder coating operations requiring reliable airflow performance, efficient powder recovery, low maintenance, and robust industrial construction. Technical Data Power: 6 kW Electrical supply: 3-phase, 380–400 V, 50 Hz Compressed air requirement: 5–6 bar clean compressed air supply Airflow capacity: up to 15,000 m³/h (variable flow control) Fan: German-made high-efficiency IE5 fan with aluminium impeller Filter system: 3 x antistatic polyester cartridge filters Filter media: 260 g/m² polyester with Teflon + aluminium coating Construction: 2 mm steel, powder coated Mobility: industrial lockable wheels Compressed air connection ports: yes Automatic filter cleaning: yes (pulse jet) Additional outlet safety filtration: yes Accessories holder / hose rack: yes Key Features High-efficiency powder recovery Automatic pulse jet cartridge cleaning Special multiport cleaning nozzles for improved filter cleaning performance Antistatic filter media prevents powder particle embedding Reduces static charge accumulation Easier cleaning and longer filter service life Variable airflow control for different production requirements Energy-efficient German IE5 fan technology Additional outlet filtration for safer operation Bsdsy N Ubzepfx Ahmsln Compressed air ports for cleaning gun and accessories Heavy-duty industrial construction Mobile design for flexible workshop layout Dimensions Width: 2700 mm Depth: 1608 mm Height: 2593 mm Suitable for Powder coating workshops Metal fabrication Steel structures Aluminium parts coating Industrial finishing lines Custom coating production Manufacturer: Brigas Industries OY Location: Finland Condition: New DISTRIBUTORS WANTED

Condition: used, mileage: 2,873 km, power: 294 kW (399.73 HP), first registration: 11/2025, fuel type: diesel, overall weight: 28,000 kg, axle configuration: 3 axles, next inspection (TÜV): 10/2028, color: blue, gearing type: mechanical, emission class: euro6, Equipment: air conditioning, all wheel drive, Internal vehicle number: FG98667 Available immediately at our location in Kaufungen. For more information, please contact: Luis Lucena Viktoria Sologubova ENGLISH MAN TGS 26.400 6x6 BB hook-lift truck – HIAB Multilift Optima 20S56 – 20 tonnes German MAN TGS 26.400 with 6x6 all-wheel drive and a HIAB Multilift hook-lift system. The vehicle has only 2,873 km on the odometer and features a 20-tonne hook-lift system, tipping hydraulics, leaf suspension on the front and rear axles, and an extendable rear underrun protection device. Technical data: * Vehicle number: FG98667 * Vehicle condition: Used * Category: Hook-lift truck * Manufacturer: MAN * Model: TGS 26.400 BB * First registration: 11/2025 * Mileage: 2,873 km * Engine displacement: 9 cm³ * Power: 294 kW (400 hp) * Fuel type: Diesel * Drive type: Internal combustion engine * Transmission: Manual * Emission class: Euro 6d * Environmental badge: 4 (Green) * Permissible total weight: 28,000 kg * Unladen weight: 13,055 kg * Payload according to available vehicle data: 17,343 kg Bodpfozu Up Hex Ahmeln * Axles: 3 * Wheelbase: 4,500 + 1,400 mm * Axle configuration: 6x6 * Colour: Blue * Air conditioning * MOT: new * German vehicle Chassis and equipment: * Permanent 6x6 all-wheel drive * Leaf suspension on front and rear axles * Tipping hydraulics * HIAB Multilift hook-lift system * Extendable rear underrun protection device * Air conditioning * Large-sized off-road tires * Lateral underrun protection * Aluminium fuel tank * Work lights on the superstructure Hook-lift specifications: * Manufacturer: HIAB / Cargotec Finland Oy * Product: Hooklift * Model: Multilift Optima 20S56 * Type according to nameplate: OPT20S56-WM-B * Load capacity of the hook-lift system: 20 tonnes * Year of manufacture of the superstructure: 2022 * Hydraulic operating pressure: 31.5 MPa * Production number: 020S5621466485 * CE marking present The installed HIAB Multilift Optima 20S56 is designed for a nominal load capacity of 20 tonnes. The actual permissible payload and container weight depend on the vehicle documents, the load distribution, and the legal axle loads. Inspection and functional testing possible by prior appointment. Further information, photos, and videos are available upon request. Errors, changes, and prior sale are subject to change.

Condition: used, Year of construction: 2006, Item: AV-12167-AV2168-50m3 Pressure Tank Capacity: 49,900 L Exterior Dimensions: Diameter Ø 3500/3550 mm, Total Height 6200 mm. Used, vertical, identical stainless steel pressure tanks – 2 pcs. Insulated with Armaflex. Ø 600 mm manhole located in the lower part of the cylinder. Year of manufacture: 2006 Test Pressure: 2.86 bar Material: AISI 304 Vertical Stainless Steel Pressure Tank – 49,900 L (TÄNKKI, Finland) High-quality vertical pressure vessel manufactured by TÄNKKI Oy, Ähtäri, Finland. Constructed in accordance with EN 13445-3 and CE certified (Notified Body 0875) for use with non-hazardous liquids (Group 2). Technical Specifications Blodpfxov Tnqlj Ahmsn Manufacturer: TÄNKKI Oy, Ähtäri, Finland Year of manufacture: 2006 Serial number: 2344/06 Volume: 49,900 liters (≈ 49.9 m³) Design pressure: 2.0 bar(g) Test pressure: 2.86 bar(g) Temperature range: 0 °C to +50 °C Design standard: EN 13445-3 (PED compliant) Media group: 2 (non-hazardous liquids) Orientation: Vertical, self-supporting construction Description This vertical stainless steel pressure tank is engineered for low-pressure storage and processing applications, making it ideal for water, milk, whey, or other food and process liquids. The tank is constructed from premium-grade stainless steel, guaranteeing long service life, durability, and full compliance with EU PED regulations.

Condition: used, Hydraulic power unit, hydraulic power pack, Polarteknik PMC 185 Bar, Used Machine Manufacturer: Polarteknik PMC Oy Ab (Made in Finland) Product No.: 93980 Diagram No.: PF314022 Design Operating Pressure: 185 BAR Year of Manufacture: 2006 (28 March 2006) Bedpfx Ahozw Eghomoln Design: Integrated hydraulic oil tank with oil level indicator, pressure gauges, filtration system, high-pressure hoses and electric motor drive. Electrical Data: 400 V, 11 kW, 21.5 A Ideally suited for powering and supplying industrial presses, special-purpose machinery, lifting equipment, abrasive blasting / Blastman systems, as well as other hydraulic systems requiring high pressure. Overall Dimensions: Width: 1300 mm Depth: 980 mm Height: 1200 mm

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 2,450 mm, total height: 1,790 mm, total length: 3,470 mm, Oy Foudila Ab is a company based in Kaskinen, Finland, with over 45 years of experience in developing equipment for the wood processing industry. For the past 15 years, we have also been active in the pallet industry and, over the years, have developed numerous machines for nailing, automatic wood feeding, and stacking. We manufacture both standard machines and customized solutions tailored to our customers’ requirements. Foudila Deck Nailing Machine DNM-153 The Foudila Deck Nailing Machine DNM-153 is a compact, flexible, and efficient unit for the production of boards for the pallet industry – offering outstanding value for money. Thanks to its high production speed, user-friendly design, and large board magazines, the machine is ideal for manufacturing both standard and custom products in small and large batches – all with just one operator. More than 1,000 decks can be produced per shift. The machine is equipped with three nailing units, each with magazines for large nail coils. Each nailing pattern can contain 1–3 nails and can be stapled if required. Boards are loaded into large buffer magazines – three cassettes for blocks/bottom boards and one cassette for deck/top boards. The machine is controlled and programmed via a modern, user-friendly software on a 10" touchscreen with Beckhoff control technology. Due to its compact design, the machine requires only a very small footprint in production and allows for quick and uncomplicated installation, as it can be delivered fully pre-assembled. The machine can, of course, be equipped with a finished goods conveyor, an automatic stacker, and an automatic board feeder. These options can also be retrofitted, enabling step-by-step investment. Bjdjy Iy I Dopfx Ahmoln Please feel free to contact us for more information, technical specifications, and pricing.

Condition: good (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 019006, For sale, removed from production: Bjdpfxsz Hlznj Ahmjln Horizon Cross Folder AFC-546AKT Serial No. 019006 Estimated year of manufacture: 2004 Price includes packing and loading onto a truck.

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 2,500 mm, total height: 1,900 mm, total length: 5,000 mm, Oy Foudila Ab is a company based in Kaskinen, Finland, with over 45 years of experience in wood handling equipment. For the past 15 years, we have also been active in the pallet industry and have developed numerous machines for nailing, automatic feeding, and stacking of wood over the years. We manufacture both standard machines and custom-tailored solutions to meet customer requirements. The DNM1600 is a flexible, compact, and efficient pneumatic nailing machine designed for the production of decks in the pallet industry. The user-friendly program allows for very rapid changeover, and the machine can store settings for over 100 different deck specifications. It features Bostitch nail guns equipped with nail magazines for jumbo coils with indicators. The machine enables the manufacturing of asymmetrical decks and is fitted with flexible cassettes for boards. A protective cover ensures noise reduction and safe operation. The machine is operated via a 10-inch touchscreen and utilizes a Beckhoff control system. Standard machine specifications: - Deck board: Length 600–1600 mm, width 75–125 mm, height 16–28 mm - Stringer: Length 600–1500 mm, width 50–125 mm, height 16–28 mm - Deck/Stringer pallet size: Length 600–1600 mm, width 600–1500 mm A two-way pallet kit is available as an additional option, allowing the production of stringer pallets/two-way pallets with a maximum stringer height of 100 mm. Capacity: - 3 decks/min (with 5 deck boards) Bedpoy Izb Eefx Ahmjln Machine dimensions: - Length: 5000 mm, width: 2500 mm, height: 1900 mm The machine is CE-marked. The machine can be equipped with automatic board feeding and automatic deck/pallet stacking. For more information, pictures, or videos, please get in touch.