Used Taylor Hobson Roundness Measuring Machine for sale (78,389)

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Equipment: documentation/manual, type plate available, SUPER PRICE!!! NOW ONLY 6,000 EUR!!! Taylor Hobson Talyrond 265 roundness measuring instrument. Extremely accurate; it can measure the roundness of lenses, optics, pistons, turbine components, tubes, shafts, and also eccentricity, e.g., of cams on a camshaft or journals of a crankshaft. It is certainly of interest to motorsport and tuning companies. The first photo is a "representative image" from a Taylor Hobson catalog, showing its basic structure, except for the computer. A newer, more modern HP computer with a small form factor is included. Max. diameter: 350 mm Max. test piece height: 500 mm (higher is possible, measured in two sections, up to a maximum of 1000 mm) Self-centering of the workpiece: +/- 5 mm Max. weight of the test piece: 40 kg Podpfx Aiszcqy Ee Tjgu The system has been used very little and has only had two owners. The original owner, from whom I purchased it, was an implant company in Hamburg. It was used there in a "medically clean environment" and is extremely clean. It was never located in a dirty machine hall. The year of manufacture is estimated to be between 2003 and 2005. The Taylor Hobson measuring software is, of course, included and runs on the supplied HP computer (without a password). It is also on the USB stick, perhaps to be installed on another machine at your location. Accessories are included: the original Taylor Hobson desk, computer, monitor, seven (7!) measuring probes, each of which is very expensive to purchase individually. A sample/pattern lens (hemisphere) for calibration is also included! The very detailed operating manual is on the USB stick, and all circuit diagrams and functional diagrams are also included! The system will be shipped on two Euro pallets via a freight forwarder. It is already securely fastened to them. The Talyrond 265 and the desk will be well-protected for transport with bubble wrap, etc., and wrapped with stretch film, and the system itself is secured with "transport safety screws." Shipping will be at the buyer's expense and will be carried out on two Euro pallets. The measuring system should definitely be set up and put into operation by a Taylor Hobson service technician, who can then recalibrate the system on-site. This is now recommended after a few years. Errors can be made during setup and commissioning. For example, some locking screws are installed for transport, and if you forget to remove them, the system can be damaged when it starts up. A truly well-maintained, very accurate system that will continue to provide excellent service for many years to come!!

Year of construction: 2018, condition: excellent (used), Maximum component weight: 75 kg Maximum moment load of the work table: 1250 g/mm Dimensions of work table: 800 x 890 mm Height of working table: 731 mm Podpsi Dagkofx Ai Tsgu Measuring height: 500 mm Total height: 1675 mm

Condition: good (used), Year of construction: 2005, functionality: limited functionality, Description MEASURING ARM IN SUITCASE. EQUIPMENT WE CAN SEND FOR CUSTOMER WOLDWIDE Pjdpfx Aovlaq Isi Togu Specifications Manufacturer FARO - SWITZERLAND Model PLATINUM P04 Year 2005 Condition Used

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, roller diameter: 60 mm, working width: 1,050 mm, sheet thickness (max.): 1 mm, roll metal bending machine Isitan 1050 X 1.2mm Manual 3 roll Bending Machine, excellent condition for sale manufacturer: Isitan 1050X1.2 max sheet width: 1050mm max sheet thickness: 1.2 mm Pgjdjwk Rlxspfx Ai Teu Wire grooves at the ends of the rollers Conical bender roller diameter: 60mm Upper roller removable for easy workpiece removal machine dimensions: length: 130cm height: 100cm width: 65cm weight: 240kg

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 08120055, workpiece weight (max.): 227 kg, travel distance X-axis: 440 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 410 mm, TECHNICAL DETAILS Travel range X-axis: 440 mm Travel range Y-axis: 500 mm Travel range Z-axis: 410 mm Max. workpiece weight: 227 kg Podpe Afhtqsfx Ai Togu Table height: 930 mm MACHINE DETAILS Last overhaul: 2025 Last calibration and maintenance: 09/09/2025 Calibration and measurement protocols: available Operating manual: available on CD Dimensions & Weight Dimensions (L x W x H): 1,030 x 1,160 x 2,320 mm Total weight: 293 kg Input voltage: 220 V Input current type: Alternating current (AC) EQUIPMENT PC-DMIS Pro for Windows Version 4.2 MR4 Release Software, legally transferable Renishaw MH20i measuring head with TP-ES probe system EM1 extension module, length: 70 mm TP20 SF probe module with standard probing force TP20 EF probe module with high probing force Functional HP computer Additional Renishaw Brown & Sharpe TP-ES measuring head, functional Several probe extensions Various probe tips The scope of delivery also includes a TESA Star-i measuring head and a Renishaw MIP measuring head. The TESA Star-i measuring head is defective. The Renishaw MIP measuring head is likely defective. However, the machine itself is equipped with the fully functional and even higher-quality Renishaw MH20i with TP-ES probe system and is therefore immediately ready for use.

Condition: refurbished (used), functionality: fully functional, Taylor Hobson Tallyrond 300 In good condition, Completely overhauled by sm-instruments (with new control unit and software) Pgedpfxoxpqwio Ai Teu Includes side table and accessories Delivery time: several weeks

Condition: ready for operation (used), Mahr Marshaft MAN 400 manual shaft measuring station, shaft measuring machine, measuring machine Mahr Marshaft MAN 400: Measuring range, length: 400 mm Year of manufacture: 2011 MarCheck: Mahr UTS 90-M: Mahr LTS 100: Mahr DMS 120 Year of manufacture: 2014 Year of manufacture: 2016 Year of manufacture: 2011 Year of manufacture: 2011 You are welcome to visit us for an inspection. We would be happy to arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and check out our other offers. Pgedpfxezmr D Ee Ai Tju The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data and errors in the description of the item may occur and are subject to change.

Condition: like new (used), 3D Machines – Brown & Sharpe Standard Pgedpfx Aezndw Tei Tju

Condition: repair required (used), Renishaw InVia Raman Microscope Spectrometer DEVICE NEEDS TO BE RECONDITIONED PRIOR TO COMMISSIONING. Pjdpsym Dt Hjfx Ai Tegu Complete with MSC20 Encoded Stage Controller RL532C50 HPNIR Laser Source A-9803-0625 CCD 1. The device doesn't come with a software license or computer. We are selling the device as it is. 2. There is a HPNIR785 Renishaw Laser Source installed on the device. Unfortunately we are a surplus seller and do not possess the expertise to test and run this machine for diagnostics. Our intentions are to sell the device for parts and leave a buyer recondition to their required standards. Device is missing some parts to make fully operational. Device is missing Renishaw Ramen Filters as seen in images. Device also is missing original Renishaw Key to open access panel.

Year of construction: 2021, condition: as good as new (ex-display), functionality: fully functional, New Single-head cutting machine OMC GIOBI 600 (year 2021) with measuring roller conveyor FOM INDUSTRIE ASSOMAK VS 6m (year 2025) and inlet conveyor PORTER 4,2m (year 2025) Condition: new, demo machines - Saw blade D 600 mm - Hdro-pneumatic feed - Inclination is pneumatic on both sides, with fixed graduations of 22.5° - 45° - 90°. For intermediate gradations, with manual mechanical stop - 2 vertical and 2 horisontal clamps - Spray mist blade lubrication system - Integral pneumatic protection Pjdoy Erwfspfx Ai Tsgu - ASSOMAK VS 6m: measuring roller conveyor with digital display and manual length stop positioning - Minimum cut 0 mm - Maximum cut 6000 mm - Measurement reading by encoder - Positioning precision ± 0,5 mm - Loading capacity per linear meter: 10 Kg - Width of bar resting surface: 200 mm - PORTER 4,2m: inlet roller conveyor - Loading capacity per linear meter: 10 Kg - Width of bar resting surface: 200 mm

Condition: excellent (used), For sale: MC9050B industrial round wood rod milling machine, manufactured in 2018, designed for producing round wooden poles and cylindrical wooden components such as tool handles, broom handles, furniture parts, and similar products. Specifications: • Model: MC9050B • Year of manufacture: 2018 • Power supply: 380V (Three-phase) • Working diameter: 15–50 mm • Minimum workpiece length: 600 mm • Main motor: 3 kW • Approximate weight: 350 kg Condition: • Excellent working condition. • Complete machine, ready for immediate use. • Inspection and testing are welcome. Pgodpfezmt U Ejx Ai Tou

Condition: like new (used), Year of construction: 2022, operating hours: 30 h, functionality: fully functional, measuring range X-axis: 500 mm, measuring range Y-axis: 500 mm, measuring range Z-axis: 200 mm, total height: 850 mm, type of input current: AC, total width: 720 mm, total length: 950 mm, overall weight: 54 kg, input voltage: 230 V, table width: 500 mm, table length: 500 mm, ambient temperature (max.): 30 °C, ambient temperature (min.): 15 °C, Equipment: documentation/manual, type plate available, KEYENCE VL-570 Optical 3D Coordinate Measuring Machine The VL-570, from Keyence’s VL-500 series, is a 3D measuring machine that measures various shapes from the stripe projection image of the object, which is captured with a black-and-white CMOS camera. The linear light from the light source (stripe projection light) is projected onto the object at an angle using the projection lens. Measurement types that can be performed with the VL-570: 3D measurement, plane measurement, profile measurement, 3D comparison measurement, profile comparison measurement. The basic unit consists of: - VL-500 control unit - VL-550 500mm base Pjdpfoz Ihkbjx Ai Togu - VL-570 measuring head - VL-H2P comparison measurement module - VL-C2 cover - OP-88145 calibration plate Technical data: Repeatability: 2µm Measuring accuracy: 10µm Standard measuring mode (4M mode): 4 million measuring points Fine measuring mode (16M mode): 16 million measuring points Rotation mechanism: 360° Tilt mechanism: 45° Measuring range: Ø500mm x H 200mm User manual and quick start guides are included. New price: €52,350 (net) Upon request, the 3D coordinate measuring machine can be delivered within a 200 km radius of our company headquarters. Delivery costs will be agreed upon separately.

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 200101521101, measuring range X-axis: 700 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 600 mm, year of last overhaul: 2026, Equipment: type plate available, For sale is a ZEISS CONTURA 7/10/6 coordinate measuring machine (CMM) with a ZEISS VAST XT gold scanning probe system and a C99 control panel. The machine is located in Velbert (North Rhine-Westphalia) and was last calibrated in February 2026. Manufacturer: Zeiss Model: SYS CONTURA 7/10/6 Part number: 623564.9010.000 Serial number: 200101521101 Year of manufacture: 01/2001 Automatic probe changer, 5 positions Measuring software: ZEISS CALYPSO 2021 Version 7.2.08 Last major maintenance including calibration: 02/2026 by Zeiss Condition: used / operational Machine type: Coordinate measuring machine Pedpfoz Duv Aex Ai Tegu AVAILABLE FROM WEEK 08/2027 The dismantling and transport are to be organized by the buyer. PLEASE NOTE THE TWO ATTACHED DOCUMENTS IN PDF FORMAT. If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: like new (used), Year of construction: 2013, functionality: fully functional, measuring range X-axis: 800 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 700 mm, workpiece weight (max.): 800 kg, warranty duration: 12 months, total height: 2,963 mm, type of input current: AC, total width: 1,700 mm, total length: 2,080 mm, overall weight: 2,275 kg, year of last overhaul: 2026, Equipment: type plate available, Important – Machine sales and service are only available within Germany! Pgedjz Hw Eljpfx Ai Tju We are selling our test and demonstration machine from our Solution Center. Other machines are also available. Please feel free to contact us. Wenzel | L87 with PH10 and SP25 scanning system Refurbished coordinate measuring machine with the latest Renishaw technology. Modernized in 2026. Measuring range XYZ 1200 x 1000 x 600 mm Measuring uncertainty MPE (E0) 2.5 + L/300 in µm Equipment: - Renishaw UCC S3 control, SPA3 servo amplifier, MCU joystick - Active temperature compensation with workpiece sensor - Renishaw PH10 rotary/swivel head with SP25-2 scanning system, including probe changer FCR25-L6 (6 ports) - MODUS measuring software, current version, with CAD import (STEP), including 1 year of software maintenance - PC system with Windows and 2 x 27" TFT monitors, NEW, including a height-adjustable desk - Control cabinet with up-to-date safety technology We will gladly adapt the equipment to your requirements. Please note: The images show the machine with an alternative probe system! Optional service package of your choice: €16,460.00 Free delivery to loading dock | Commissioning | Testing | Accuracy acceptance according to DIN ISO 10360 | Software training in Pliezhausen or Eitorf | Further options and equipment are available upon request.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, measuring range X-axis: 4,000 mm, measuring range Y-axis: 3,200 mm, measuring range Z-axis: 2,100 mm, workpiece weight (max.): 4,500 kg, total height: 3,660 mm, type of input current: AC, total length: 4,800 mm, overall weight: 11,000 kg, input voltage: 230 V, table width: 3,200 mm, table height: 725 mm, table length: 4,800 mm, year of last overhaul: 2024, Equipment: documentation/manual, type plate available, Dual-column CMM * Floor-mounted design (measuring plate in one piece, 5000 x 3100 mm) * Measuring plate is decoupled with active vibration isolation Measuring range * X 4,000, Y 2 x 1,600 (3,200), Z 2,100 [mm] * Overlap of columns in Y = 150 [mm] Measuring uncertainty Single column: 20 + L/60, max. 60 [µm] at L = 4,000 mm Dual column: 40 + L/35, max. 80 [µm] at L = 4,000 mm Dynamics 3D traversing speed 433 mm/sec 3D acceleration 768 mm/sec² Probing system (per column) * HEXAGON HH-AS2.5° * Optical laser scanner, type HP-L-10.10 Controller (per column) * DC800 ETH Wireless operating unit * Portable terminal with display Computer (per column) * DELL Tower, 24" monitors * According to the software manufacturer's specifications Software (per column) * PCDMIS CAD++ 2026.R1 * Option: Laser sensor HP-L-10.10 * Dual-column function Extensive accessories * Calibration sphere holder - tactile probes - equipped with 3 * Calibration sphere holder - optical laser - equipped with 2 * Variable stylus assortment * 8-position modules in various lengths * SICK light curtain system integrated for automatic operation, all-round Supplier services * Transport, commissioning, calibration, final acceptance Warranty * 12 months, from the date of acceptance Availability Podpfxsz Rpmwj Ai Tsgu * Short-term

Condition: used, Year of construction: 2010, functionality: limited functionality, measuring range X-axis: 300 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 200 mm, total height: 1,680 mm, type of input current: AC, total width: 740 mm, input voltage: 230 V, table length: 750 mm, Equipment: type plate available, Machines works fluently apart from sprocket- which blokes and reqiures fixing. Psdpfsz Ditvjx Ai Togu

Condition: good (used), Year of construction: 2005, functionality: fully functional, year of last overhaul: 2021, Equipment: documentation/manual, type plate available, Highly precise, mobile coordinate measuring machine (CMM) of the FARO Titanium type, with an arm length of 2.4 meters and 6 axes. The system is in good condition and ready for immediate use. Pedozx Uwxjpfx Ai Tegu As it is the 6-axis version, the arm is particularly rigid and delivers extremely precise, repeatable measurement results during the tactile probing of components. Perfectly suited for industrial quality assurance, first article inspection, or the comparison of nominal and actual values directly in the workshop. Technical data & highlights: Measuring range: 2.4 meters (perfect for medium to large components and fixtures) Kinematics: 6 axes (maximum rigidity for tactile measurements) Precision: Very high single-point repeatability (typically approx. ±0.025 mm) Environmental protection: 6 internal temperature sensors automatically compensate for fluctuations in the workshop. Software included: Delcam PowerInspect 2015 (with dongle) The package includes the professional measuring software Delcam PowerInspect. Activation is straightforward via the included hardware USB dongle (no subscription, unlimited usage). Fast comparison of nominal and actual values against CAD data. Creation of professional measurement reports for customers. Simple evaluation of form and position tolerances. Scope of delivery: FARO Titanium 2.4m measuring arm (6 axes) Original, robust FARO transport case (heavy-duty) Delcam PowerInspect software incl. USB license dongle Measuring probe / sensors incl. calibration sphere Power supply, cable set Condition & details: Year of manufacture: 2005 Last calibration: 06/2021, certificates available Normal signs of wear and tear Shipping can be arranged for an additional fee. The measuring arm can be inspected and tested by appointment.

Condition: used, functionality: fully functional, This is a round filter coffee machine, a Bravilor Bonamat B20 HW. This coffee machine is ideally suited for supplying coffee in large establishments during peak hours, such as care facilities, catering businesses, company canteens, etc. The B HW series is equipped with a separate hot water tap. The containers can be easily transported. The unit has undergone a thorough inspection in our in-house workshop and is fully functional. It has only been operated with a water softening system, so there are no limescale deposits in the system. The matching drip tray for dispensing coffee is not shown in the picture, but is also included. The base cabinets shown in the pictures are not included in the offer, but can be purchased as an optional extra. You will receive an invoice with VAT shown. Our used equipment service for you: 6 months warranty on all electrical parts, limited to the replacement of defective parts, without installation and removal costs. High-quality branded equipment at fair prices. Professional overhaul / inspection & expert cleaning. Tested & fully functional - or your money back. Flexible shipping or self-collection options. Competent advice - before and after purchase. Provision of operating instructions, connection diagrams & spare parts. Inspection according to DGUV V3 standard. Technical data: W x D x H: approx. 1173 x 600 x 947 mm Model with 1 brewing system and 2 containers Separate hot water tap With sight glass Coffee brewing unit Peak capacity: 40 liters Hourly output: approx. 90 liters Brewing time: approx. 14 min. / 20 liters Hot water unit Peak capacity: 4.6 liters Hourly output: approx. 20 liters Frequency: 50/60 Hz Voltage: 400 V 3 N Connection value: 11.2 kW Further information: 1 brewing column in the center 1 coffee container on the right and left, removable With hot water dispensing: Coffee is kept warm in a container Audible signal at the end of brewing With timer Digital display Total and daily counters Descaling system Stainless steel housing Fixed water connection Pgsdpszxn Auofx Ai Teu Condition: Used, thoroughly inspected, fully functional Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to changes and errors Do you have any questions, would you like to request a consultation, or would you like to see something on site? You can reach us by telephone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. Sales are made exclusively subject to our general terms and conditions (GTC).

Condition: good (used), Year of construction: 2023, functionality: fully functional, Keyence MD-X2500A 3-Axis Hybrid Laser Marking System, 25W Laser Marker Used, from business liquidation Initial purchase: 03/2023 3-axis hybrid laser marking system, 25W special edition Marking laser (control unit + marking head) MD-C2B safety module MD-AD-XYT XY tracking add-on for MDX2 MD-AD-ZT Z tracking add-on for MDX2 MD-AD-2DR 2D code reader add-on for MDX2 MD-AD-3D 3D add-on for MDX2 Power cable for MDX/MDF/MLZ Marking process: Simultaneous 3-axis scanning (XYZ) Marking area: 125 × 125 × 42 mm Standard operating distance (± variable width): 189 mm (±21 mm) Pgodsz H U Udopfx Ai Tju Marking resolution: 2 μm Scanning speed: max. 12000 mm/s Marking laser Wavelength: 1064 nm Output power: 25 W Rated voltage and power consumption: 100 to 240 V AC ±10 %, 50/60 Hz, 850 VA max. Weight: Control unit: 23.0 kg, Marking head: 13.8 kg PC software: MB-PH1 *1 (Marking Builder Plus, marking diagnostics tool) must be requested from Keyence We recommend an inspection Information without guarantee Details, information, and technical data from the manufacturer To prevent any misunderstandings regarding the item's condition and the scope of the auction, we generally recommend an inspection BEFORE placing a bid! Further technical data can be requested from the manufacturer. Our business hours are from Monday to Friday between 8:30 a.m. and 12:00 p.m. and 1:00 p.m. and 4:30 p.m. During this time, inspections and collections are possible and desirable, AFTER prior appointment arrangement. Subject to prior sale, changes, errors and omissions.

Condition: ready for operation (used), Zeiss MC 850 3D coordinate measuring machine Measuring range x: approx. 800-850mm Measuring range y: approx. 1200mm Measuring range z: approx. 600mm New software 2025 Accessories: Computer Changer Probe You are welcome to visit us for a viewing. We can also arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and check out our other offers as well. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Psdpfxeznkule Ai Tsgu Deviations from technical data as well as errors in the description of the item may occur and are subject to change.

Condition: good (used), measuring range X-axis: 505 mm, measuring range Y-axis: 405 mm, measuring range Z-axis: 4,058 mm, workpiece weight (max.): 100 kg, total height: 2,185 mm, total width: 1,082 mm, total length: 1,054 mm, travel distance X-axis: 505 mm, travel distance Y-axis: 405 mm, travel distance Z-axis: 405 mm, overall weight: 515 kg, input voltage: 230 V, travel speed (max.): 25,800 mm/min, table load: 100 kg, compressed air connection: 5 bar, ambient temperature (max.): 26 °C, ambient temperature (min.): 16 °C, Equipment: type plate available, Mitutoyo Euro-C Apex544 CNC 3D CMM. P.S. For Dutch buyers looking for a CMM: Keep in mind that a measuring machine must always be professionally packaged, transported, and installed! These costs are NEVER mentioned by the sellers on this website. These costs usually range from €5,000 to even above €10,000! Please take this into account. Also, the operation (and especially the accuracy) is not guaranteed. An excellent 3D CNC CMM at a very attractive price. Three-dimensional measurement with accuracy within three micrometers! A fine-looking Mitutoyo Euro-C Apex544 3D Coordinate Measuring Machine. In very good condition. Fully meets specifications. Measuring range: X-axis 505 mm Y-axis 405 mm Z-axis 405 mm Specification ISO 10360-2 MPEE = [2.9 + 4.0L/1000] µm (at a temperature of 16–26°C) Resolution 0.0001 mm. CNC speed 430 mm/sec. Maximum acceleration 0.17 g Workpiece load capacity up to 100 kg Height 219 cm Width 109 cm Length 106 cm Air-bearing axes (5 bar supply) Operates on 230V power to the controller (the CMM itself runs on low voltage). Euro-C Apex544 (PH1 + TP20). Pgodpfx Aszz Rc Asi Tsu Standard joystick. Desktop PC with Windows 11 Pro (English). 24-inch monitor. Mouse & keyboard. MCOSMOS v3.0 Upgrades available to: PH10T/M + PHC10-2. TP200 + PI200-2 SCR200 + 6 STD modules. MCOSMOS version of choice (subject to stock). Dual joystick. (On-site training within the Benelux region). Sales prices exclude: transport, installation, calibration, and measurement certificate. Can be viewed in operation/demonstrated in the Netherlands by appointment. Within the Netherlands, transport and installation will be provided free of charge (calibration is not included, though it is available as an option).

Condition: ready for operation (used), Year of construction: 1990, Immediately available from prototype construction: Coordinate measuring machine from Zett Mess Platen and 2 measuring beams, manufactured in 1990 Electronics and measuring system newly installed in 2020 Platen dimensions: 6,000 x 3,100 mm Measuring range: X/Y/Z 6 / 3,100 / 2,500 mm Service available from the successor company, Zett Mess Pgedpfxj Aa Ikfe Ai Tou Includes all accessories Price: EUR 9,500.00 plus VAT, ex works

Year of construction: 2010, operating hours: 7,546 h, condition: good (used), functionality: fully functional, machine/vehicle number: 04810, We are offering this well-maintained COMANDULLI OMEGA 100 edge grinding machine for round edges, manufactured in 2010. Manufacturer: COMANDULLI Model: OMEGA 100 Year of manufacture: 2010 Condition: good Pjdpfozyuckox Ai Togu Category ID: 430 Machine type: Edge grinding machine for round edges Configuration: Belt running direction: left to right Pre-grinding support for end faces Thickness gauge 1+1 automatic pre-grinding supports 45° 8 end face grinding supports for straight and round edges 2 upper and 2 lower chamfering supports Swiveling device for chamfering supports for easy processing of pencil edges Finishing grinding support 2 roller tables, each 2m long The machine is currently in operation in Australia; the price includes transportation CIF to a European port of your choice. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, overall weight: 980 kg, measuring range X-axis: 700 mm, measuring range Y-axis: 700 mm, measuring range Z-axis: 500 mm, Coordinate measuring machine Coord3 ARES NT 7.7.5 Year of manufacture: 2014 Motorized indexable head Renishaw PH10M hand controller: Renishaw MCU LITE-2 MPEe accuracy: 2.5 µm + L/300 Repetition accuracy: from 2.3 µm Measuring range: 700 x 700 x 500 (mm) Granite bed size: 1330x963.5x170mm Software: TouchDMIS 5.2 + dongle Pgsdpfxou E U Hbj Ai Tou The Z-axis support column is made of silicon carbide, which increases rigidity. DC servo motors, air bearings on all axes, free-floating linear scales with 0.1 µm resolution.

Condition: excellent (used), Year of construction: 2018, operating hours: 13,000 h, functionality: fully functional, travel distance X-axis: 3,200 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 1,500 mm, overall weight: 8,000 kg, For sale on behalf of a customer is a ZEISS PRO T advance 16/15 3D coordinate measuring machine. The machine is currently fully operational and connected to the power supply. Technical data and features: - Year of manufacture: 2018 - Operating hours: approx. 13,000 - Control system: ZEISS C99N - Measuring range: X 3,200 × Y 1,600 × Z 1,500 mm - Rotary-swivel joint: ZEISS RDS-C6 - 3D measuring head: RST-P - Ceramic probe ball, identification C02258-d - RDS probe changing magazine - 36-piece RST probe kit - Measuring software: ZEISS Caligo - PC workstation: HP Z440 G3 with Intel Xeon E5-1620 v4, 32 GB RAM and NVIDIA Quadro K2200 - Measuring table: solid special cast iron table, flatness according to DIN 876/II - Last DAkkS calibration: 02/26 Podez Rmkyjpfx Ai Tsgu