Used Taylor Hobson Talyrond 265 for sale (800)

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Equipment: type plate available, Taylor Hobson Talyrond 265 roundness measuring device. Extremely precise, it can measure the roundness of lenses, optics, piston turbine parts, tubes, shafts, but also eccentricity, e.g., of cams on a camshaft or journals of a crankshaft; it is certainly also of interest to motorsports and tuning companies. The first photo is a "representative image" from a Taylor Hobson catalog; this is what it looks like, except for the computer, which is a newer, smaller-form-factor HP model. Max. diameter 350mm Max. test piece height 500mm (higher measurements can be taken in two parts, up to a maximum of 1000mm...) Self-centering of the workpiece +/- 5mm Max. weight of test piece 40 kg The system has been used very little and has had only two owners. The first owner, from whom I bought it, was an implant company in Hamburg; it was used in a "medically clean environment," and it is extremely clean. It has never been in a dirty machine hall. The year of manufacture is estimated to be between 2002 and 2005. Hnedpfxozcqy Ej Ap Hjn The Taylor-Hobson measuring software is of course included and runs on the supplied HP computer (without a password...). Accessories are included: the original Taylor-Hobson desk, computer, monitor, seven (7!) measuring probes, each of which is very expensive to purchase. A sample/sample lens (hemisphere) is included for calibration! The very detailed operating manual is on the USB stick, and all circuit diagrams and functional diagrams are also included! The system will be shipped by freight forwarder on two Euro pallets. It is already well secured on them. The Talyrond 265 and the desk will be wrapped with bubble wrap, etc., and with stretch film to provide maximum protection for transport; the system itself is fixed with "transport safety screws." Shipping costs within Germany are included; I will cover them! So, within Germany: FREE SHIPPING! The measuring system should definitely be assembled and put into operation by a Taylor Hobson service technician, who can then recalibrate the system on-site; this is recommended after a few years. It is possible to make mistakes during assembly and commissioning. For example, there are several locking screws installed for transport; if you forget them, the system may be damaged when it starts up. This is a truly well-maintained, very precise system that will continue to provide excellent service for many years to come!

Year of construction: 2018, condition: excellent (used), Maximum component weight: 75 kg Maximum moment load of the work table: 1250 g/mm Dimensions of work table: 800 x 890 mm Height of working table: 731 mm Measuring height: 500 mm Hodei Dagkepfx Ap Honn Total height: 1675 mm

Condition: refurbished (used), functionality: fully functional, Taylor Hobson Tallyrond 300 Hjdpfxsxpqwij Ap Hjnn In good condition, Completely overhauled by sm-instruments (with new control unit and software) Includes side table and accessories Delivery time: several weeks

Condition: good (used), Year of construction: 2006, A versatile 6 section clamping machine specifically designed for solid wood edge and face laminating. The Clamp Carrier is ideal for producing a variety of components such as panels, table tops, block gluings, joinery sections and stair parts. The patented 'equaliser' clamp arms incorporate a number of important features not found on other types of mechanical clamp that help ensure a quality glue joint is produced. As standard the machine is equipped with a hydraulic clamp tightener / loosener, pneumatic component flattener and hydraulic rotation. Equipped with: Hodsru Evgepfx Ap Hjnn 302 type clamp arms with 915mm (36") max opening and 95mm ( 3.5") high jaws - 2 x 80S heavy duty hydraulic drives for rotation - 1 x 80V semi automatic hydraulic clamp tightener. (Hydraulic pack 3 phase electrics). - 1 x 80D pneumatic component flattener - Pneumatic movement in / out of front rest - CE safety perimeter guards Year - 2006 CE

Condition: excellent (used), Three-jaw chuck Make Taylor diameter 280 mm centering 117,3 mm Chuck height 115 mm Weight 30 kg Hjdpfxotuvpzj Ap Hjnn

Condition: new, Taylor 6/2.5m Clamp Carrier System For Solid Wood Edge / Face Laminating. A versatile 6 section clamping machine specifically designed for solid wood edge and face laminating, the Clamp Carrier is ideal for producing a variety of components such as panels, table tops, block gluings, joinery sections and stair parts. The patented 'equaliser' clamp arms incorporate a number of important features not found on other types of mechanical clamp that help ensure a quality glue joint is produced. As standard the machine is equipped with a pneumatic clamp tightener / loosener, pneumatic component flattener and air motor drive for rotation. On request the machine can be specified with a working width of 3.1m and also with 12 working sections. 2.5m (8.5ft wide) 6 section frame. 36 x 302 type clamp arms with 90mm (3.5") high jaws and 1015mm (40") max. opening. (6 clamps per section). 1 x 80U type swing style pneumatic clamp tightener and component flattener with push button operation. 1 x 80AA pneumatic motor drive rotation. Front rest - manually operated. Pneumatic joy stick control for rotation / forward reverse. CE safety perimeter guards to sides / rear Hnjdpfxsdy Dtrs Ap Hjn

Condition: used, For sale: TAYLOR brand machine for preparing milkshakes, granita/slush ice, ice coffee, and other frozen beverages. NEW PRICE: 250,000 CZK excluding VAT. The machine is in functional condition, ready for immediate operation. Very fast return on investment. Taylor is manufactured in the USA and has had representation in the Czech Republic for several decades, ensuring hassle-free spare parts availability. Features a 6.6-liter freezing cylinder and an 18.9-liter mix reservoir. Pasteurization function included. Indicator lights (Mix-low and Mix-out) alert staff when the mix in the reservoir is insufficient. Automatic density control maintains consistent product quality. Agitator design allows for quicker shake dispensing. Multiple units available; price listed per piece. Hnodsyn Dd Uepfx Ap Hsn

Condition: used, This listing is for a 1 of 2 Taylor-Wharton LS6000 Nitrogen Vessel. The unit is in full working condition and is ready for immediate release. The Worthington Industries Laboratory System (LS) Series of cryogenic refrigerators is uniquely designed for vial storage in convenient box-type storage racks. The liquid nitrogen refrigerators offer maximum Hnsdoxx Aw Tjpfx Ap Hjn holding times, which means lower per vial operating costs and fewer refills. They deliver extremely stable low-temperature profiles due to the aluminum inner vessel, and offer storage capacities of between 750 and 6000 standard 2ml vials. The LS6000 is available with a simple and reliable liquid level controller with temperature readout that provides automatic filling and alarm features.

Condition: reconditioned (used), Year of construction: 2004, AUTOMATIC WINDMILL PRESS WITH MECHANICAL LOCKING AND FEEDING AFTER A COMPLETE RENOVATION Hsdpfx Apslnanws Honn

Condition: used, TAYLOR HYDRAULIC ROTARY CLAMP - USED - Working length mm. 2400 - Working width mm. 800 - 20 sections - N. 3 pressers for each section Hnedpjwrm S Dsfx Ap Hsn

Condition: used, Year of construction: 2024, operating hours: 1,800 h, maximum speed: 50 km/h, front tire size: 600/70 R30 | 0%, rear tire size: 710/70 R42 | 0%, tire size: 710/70 R42, number of beds: 43, Tires (front): 600/70 R30, Tires (rear): 710/70 R42, Operating hours: 1800, Initial registration: 02/02/2024. Basic equipment/technical data: ENGINE: Max. power: 195/265 kW/hp (ISO 14396) Max. torque: 1200 Nm Maximum power with power management: 209/285 kW/hp Max. torque with power management: 1257 Nm 6 cylinders, 7.4l AGCO Power - 74 LFNT-5D, CR, 4V Emission standard (DOC+SC+SCR) without exhaust gas recirculation, Stage 5 Electronic engine control with Vistronic fan control Engine speed memory Powercore engine air filter with coarse dirt pre-separation Hedpfxozdmtvj Ap Hsnn EasyCare cooler package Additional fuel pre-filter with water separator 500-liter fuel tank

Condition: used, functionality: fully functional, tire size: 265/40 R22 106V, Equipment: summer tires, For sale: 4 summer tires mounted on POLESTAR alloy wheels. PIRELLI P-ZERO 365/40 R22 106V Tread depth: 5-6 mm. Hodpfx Ajzck E Usp Hsnn

Condition: good (used), Year of construction: 2005, Truck-mounted aerial platform – Ruthmann T 265 Manufacturer: Ruthmann Model: T 265 Year of manufacture: 2005 Technical data Working height: 26.40 m Platform height: 24.40 m Lateral reach: 17.20 m Slewing range: 450° Basket arm swivel angle: 200° Total weight: 7,490 kg Length: 9.35 m Width: 2.51 m Headroom: 3.55 m Working platform size: 1.70 m x 1.00 m Platform load capacity: 350 kg Outriggers: Horizontal/Vertical Outrigger span: 4.40 m on both sides / 3.45 m on one side / 2.50 m in profile Drive: Diesel Special equipment 220 V connection to the working platform Water/air pressure line to the working platform Hnodpfx Ajgy Tu Iep Hjn Platform exchange system Platform rotation +/- 45° Cab roof protection Driver’s license class: 3 / C1 Dates/Inspections TÜV (German Technical Inspection Association): valid until 01/2027 UVV (German Accident Prevention Regulation): valid until 11/2026 Mileage: 197,268 km as of 11/2025 Stated price plus statutory VAT. Are you interested? We are always happy to assist you! You can reach us from Monday to Friday from 7:00 a.m. to 4:00 p.m.! Subject to changes and errors.

Condition: used, functionality: fully functional, Lanico DT 265 Automatic can seamer 153 mm Hnedexupn Ropfx Ap Hen complete

Condition: good (used), Clamping angle, clamping aid -Clamping angle: for workpiece clamping -Wall thickness: 31 mm -Dimensions: 265/150/H200 mm -Weight: 18.7 kg Hnsdpfxsy Iwp Ee Ap Hjn

Condition: excellent (used), axle configuration: 3 axles, first registration: 09/2008, loading space length: 13,400 mm, loading space width: 2,500 mm, loading space height: 2,650 mm, total length: 14,000 mm, total width: 2,600 mm, wheelbase: 8,860 mm, color: other, Year of construction: 2008, WKESD00000412431 Cool unit brand: Carrier = More information = Empty weight: 8.800 kg Carrying capacity: 32.200 kg GVW: 41.000 kg Cooling engine: diesel and electric Technical condition: very good Visual appearance: very good Registration number: OK-72-NX = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. Hnsdpfsymryhox Ap Hon If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: good (used), Top support Base plate 300 x 320 mm Hnsdsb E Nw Iopfx Ap Hjn Bolt circle 265 mm in diameter centering collar 100 mm in diameter Base plate to steel holder 185 mm

Condition: used, Jungheinrich EJC 14 Lifting ant no. 265 Stroke: 2900mm Rated load capacity: 1400 kg Operating hours: 3389 h Further technical data see pictures. (Changes and errors in the technical data, information are reserved) Hodouuy Rpepfx Ap Honn We are happy to organize a cost-effective forwarding agent for you. organize! You are welcome to come by for a viewing. You will receive a proper invoice. Foreign customers can also receive a net invoice. can also be issued. Prerequisite is a valid VAT number. Subject to prior sale. Company names and trademarks are the property of their respective owners. and serve only to identify and describe the products. The design and electrical connection of the machine / The installation and electrical connection of the machine/device must be carried out by a trained specialist. checked.

Year of construction: 1995, condition: ready for operation (used), A placement line with three (3) Zevatech/Juki placement machines, one (1) Zevatech/Juki tray changer and one (1) DEK screen printer is available. 1) 2x Zevatech/Juki FS730, year of manufacture: 1995, max. placement capacity: 3000/h, placement modules: 4, placement accuracy: +/-0.01mm, changeover time: 0.7s-1.1s. 2) Zevatech/Juki FM740, year of manufacture: 1997, max. placement capacity: 10000/h, placement accuracy: +/-0.05mm, board dimensions X/Y: 400mm/350mm, feeder inputs: 80/8mm, placement modules: 2. 3) Tray changer Zevatech/Juki TR4NEZ, year of manufacture: 1995. 4) SMD screen printer DEK 265, year of manufacture: 1995, printing process: Stencil printing, max. PCB size: 450mm/340mm, printing accuracy at 6 Sigma: +/-12.5µm, max. PCB thickness: 6mm, dimensions X/Y/Z: approx. 1400mm/1600mm/1500mm, weight: approx. 900kg. All machines are part of a complete system and are controlled by the same PC. On the screen printer, the front squeegee axis amplifier board is defective. Documentation available. Hnodpfxetz Di Ns Ap Hsn

Condition: used, color: red, Hose diameter: 82 Hodoyaw A Iopfx Ap Hsnn Hose length: 265 m

Condition: used, first registration: 11/2010, color: other, Year of construction: 2010, GOODYEAR TIRES IN GOOD CONDITION FOR MEGA OR LOWLOADER. Hnodpfxjxvx Ipo Ap Hsn

Condition: good (used), 2-column punching tool, separating tool, punching tool, punch, punching die, punching stamp, column frame -Punch tool: 2 columns, with 4-digit code -Mounting: Bolt Ø 38 mm -Die stamp: see photos -Dimensions: 450/265/H305 mm Hodjhb N Atepfx Ap Honn -Weight: 94 kg

Condition: good (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 12A802697, cooling capacity: 911.3 kW (1,239.02 HP), type of input current: three-phase, type of cooling: water, overall weight: 4,492 kg, pressure: 24.5 bar, volume flow: 302.4 m³/h, total width: 900 mm, total length: 4,250 mm, total height: 2,060 mm, warranty duration: 3 months, Equipment: compressor, Used Carrier 30 HXC 265 water-cooled chiller operating on R134A. Complete with 2x Carrier 06NW2300S5EA-A00 & 1x Carrier 06NW1250S7EA-A00 semi-hermetic screw compressors, shell and tube condenser, shell and tube evaporator, 2 oil pumps, control cabinet with display. Specifications: Brand: Carrier Model: 30 HXC 265 Product type: Water-cooled chiller Hnedpfxjxz Ehaj Ap Hen Capacity kW: 911.3 Capacity Ton: 259.1 Refrigerant: R134A Weight: 4492 kg Dimensions: 4250x900x2060 mm (LxWxH) Compressors: 2 Carrier 06NW2300S5EA-A00 & 1 Carrier 06NW1250S7EA-A00 Display: Carrier display

Condition: good (used), Dust extraction blower, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower, radial fan, ventilation blower, radial blower, blower, fan -Fan: Radial fan blower, without drive Hsdpfxjx S Eine Ap Honn -Type: Fan wheel Ø 265 x 35 mm -Drive shaft: V-belt pulley Ø 75 mm, see photos -Inlet connection: Ø 95 mm -Outlet connection: Ø 95 mm -Dimensions: 355/200/H490 mm -Weight: 7 kg

Condition: good (used), Tubular heater, heating tape, heating sleeve, mica heater, cylinder heater, heating cylinder, ceramic heating tape Hnjdelw Azbepfx Ap Hon -Manufacturer: Erge, heating tape heating sleeve -Type: Ø32 x 265 mm, see photos -Item no.: 832 597 65 -Heating power: W -Voltage: V -Number: 2x heating tape available -Price per piece -Dimensions: 270/140/H50 mm -Weight: 1.1 kg/pc.