Used Taylor-Dunn Tc80 for sale (46)

Condition: used, Year of construction: 2011, total length: 3,340 mm, Tugger Kdedpfxjz Sfb Uo Ag Aou Taylor-Dunn TC80 Drive Diesel Year built 2011

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Equipment: documentation/manual, type plate available, GREAT PRICE!!! ONLY 6,500,- Original price over 38,000,- Taylor Hobson Talyrond 265 roundness measuring device. Extremely accurate, it can measure the roundness of lenses, optics, pistons, turbine components, tubes, shafts, but also eccentricity, e.g. of cams on a camshaft, or journals of a crankshaft; it is certainly of interest to motorsport and tuning companies. The first photo is a "representative image" from a Taylor Hobson catalog, showing how it is set up, except for the computer; a newer, more modern HP model with a small form factor is included. Max. diameter 350mm Max. test piece height 500mm (higher measurements up to max. 1000mm can be taken by measuring in two halves....) Self-centering of the workpiece +/- 5mm Max. weight of test piece 40 kg The system has been used very little and has had only two owners. The first owner, from whom I bought it, was an implant company in Hamburg, where it was used in a "medically clean environment"; it is extremely clean. It was never in a dirty machine hall. The year of manufacture is estimated to be between 2003 and 2005. The Taylor-Hobson measuring software is, of course, included and runs on the supplied HP computer (without a password....). It is also on the USB stick, perhaps to install it on another machine at your location. Kdjdozcqy Ejpfx Ag Asu Accessories are included, the original Taylor-Hobson desk, computer, monitor, seven (7!) measuring probes, each of which is very expensive to purchase. A sample/sample lens (hemisphere) for calibration is also included! The very detailed operating manual is on the USB stick, and it also contains all the circuit diagrams and functional diagrams! The system will be shipped on two Euro pallets via a shipping company. It is already securely fastened to them. The Talyrond 265 and the desk will be well protected with bubble wrap, etc., and wrapped with stretch film for transport on the pallets. The system itself is fixed with "transport safety screws".... Shipping is at the buyer's expense and will be carried out on two Euro pallets.... The measuring system should definitely be set up and put into operation by a Taylor Hobson service technician, who can then also recalibrate the system on site; this is now recommended after a few years. Mistakes can be made during assembly and commissioning. For example, there are several locking screws for transport; if you forget them, the system could be damaged when it starts up. A truly well-maintained, very accurate system that will provide many years of excellent service!!

Condition: refurbished (used), functionality: fully functional, Taylor Hobson Tallyrond 300 Kjdpfx Agjxpqwij Ajdu In good condition, Completely overhauled by sm-instruments (with new control unit and software) Includes side table and accessories Delivery time: several weeks

Condition: good (used), Year of construction: 2006, A versatile 6 section clamping machine specifically designed for solid wood edge and face laminating. The Clamp Carrier is ideal for producing a variety of components such as panels, table tops, block gluings, joinery sections and stair parts. The patented 'equaliser' clamp arms incorporate a number of important features not found on other types of mechanical clamp that help ensure a quality glue joint is produced. As standard the machine is equipped with a hydraulic clamp tightener / loosener, pneumatic component flattener and hydraulic rotation. Equipped with: 302 type clamp arms with 915mm (36") max opening and 95mm ( 3.5") high jaws - 2 x 80S heavy duty hydraulic drives for rotation Kedpferu Evgox Ag Aedu - 1 x 80V semi automatic hydraulic clamp tightener. (Hydraulic pack 3 phase electrics). - 1 x 80D pneumatic component flattener - Pneumatic movement in / out of front rest - CE safety perimeter guards Year - 2006 CE

Year of construction: 2018, condition: excellent (used), Maximum component weight: 75 kg Maximum moment load of the work table: 1250 g/mm Kdsdsi Dagkopfx Ag Aju Dimensions of work table: 800 x 890 mm Height of working table: 731 mm Measuring height: 500 mm Total height: 1675 mm

Condition: used, This listing is for a 1 of 2 Taylor-Wharton LS6000 Nitrogen Vessel. The unit is in full working condition and is ready for immediate release. Kjdpfexx Aw Tex Ag Aodu The Worthington Industries Laboratory System (LS) Series of cryogenic refrigerators is uniquely designed for vial storage in convenient box-type storage racks. The liquid nitrogen refrigerators offer maximum holding times, which means lower per vial operating costs and fewer refills. They deliver extremely stable low-temperature profiles due to the aluminum inner vessel, and offer storage capacities of between 750 and 6000 standard 2ml vials. The LS6000 is available with a simple and reliable liquid level controller with temperature readout that provides automatic filling and alarm features.

Condition: used, TAYLOR HYDRAULIC ROTARY CLAMP - USED - Working length mm. 2400 - Working width mm. 800 - 20 sections Kdodowrm S Dspfx Ag Asu - N. 3 pressers for each section

Condition: reconditioned (used), Year of construction: 2004, AUTOMATIC WINDMILL PRESS WITH MECHANICAL LOCKING AND FEEDING AFTER A COMPLETE RENOVATION Kedpjlnanwefx Ag Aodu

Condition: good (used), Year of construction: 2017, More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. Kdedpsz Rgwtjfx Ag Aju See all the available machines at our website. Since 1977 supplier of reliable used agricultural and horticultural equipmentMachines are checked for deliveryExperienced teamWe can help you with getting the machine to your company Duijndam Machines The specialist in used agriculture and horticulture machinery

Condition: like new (used), functionality: fully functional, Year of construction: 2025, operating hours: 30 h, control type: CNC control, actuation type: electric, laser type: fiber laser, laser source manufacturer: Raycus, laser source model: Raycus, laser hours: 30 h, laser power: 6,000 W, sheet thickness (max.): 15 mm, sheet thickness steel (max.): 15 mm, pipe diameter (max.): 220 mm, pipe length (max.): 6,000 mm, table length: 3,000 mm, table width: 1,500 mm, travel distance X-axis: 3,015 mm, travel distance Y-axis: 1,515 mm, travel distance Z-axis: 50 mm, type of cooling: water, Equipment: CE marking, centralized greasing system, cooling unit, 🇳🇱 Verkooptekst voor uw BEKE 6 kW Fiber Lasersnijmachine (3000 × 1500, Reci‑kop) Bent u op zoek naar een krachtige, nauwkeurige en betaalbare lasersnijmachine voor metaalbewerking? Deze BEKE 6 kW fiber lasersnijmachine, uitgerust met een Reci‑laserkop en een efficiënt werkbereik van 3000 × 1500 mm, biedt uitstekende prestaties voor zowel dunne als dikke metalen platen. Echt 6000 watt vermogen voor het snijden van staal, RVS, aluminium, koper en messing Reci‑laserkop voor stabiele prestaties, hoge snijkwaliteit en lage onderhoudskosten Compact werkbereik van 3000 × 1500 mm, ideaal voor standaard platen en efficiënte productie Ksdpfxezyv Sye Ag Aodu Strakke snijranden zonder nabewerking Hoge productiesnelheid, perfect voor seriewerk en industriële toepassingen Betrouwbare onderdelen: Reci‑kop, Fuji servo’s, HIWIN geleiders Gebruiksvriendelijke CNC‑besturing met hoge nauwkeurigheid Lage energieconsumptie vergeleken met CO₂‑lasers ⚙️ Technische specificaties Werkbereik: 3000 × 1500 mm Vermogen: 6000 W fiber laser Positioneringsnauwkeurigheid: ±0,03 mm Herhaalnauwkeurigheid: ±0,02 mm Snijsnelheid: tot 40 m/min Snijdikte: tot 20 mm, afhankelijk van materiaal Koelsysteem: industrieel waterkoelsysteem

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 360 mm, travel distance Z-axis: 900 mm, number of axes: 4, This 4-axis SPINNER TC800 110MCY was manufactured in 2016. It features a Siemens control system, operating at a voltage of 400 V and a frequency of 50/60 Hz. The machine has a full-load current of 63 A and a nominal current of 80 A. If you are looking to get high-quality turn-milling capabilities, consider the SPINNER TC800 110MCY machine we have for sale. Contact us for further details. Kdodpfx Agez Hwflo Aou Technical Specification Counter Spindle No Driven Tools Yes

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Spinner TC800-110MCY including tool package with tool cart Control: Siemens 840D Max. Drehdurchmesser: 500 mm Max. swing diameter: 800 mm distance between centers: 800 mm X axis: 360 mm Y-axis: 120 mm (-55 + 65 mm) Z-axis: 900 mm Kodpfx Aoz E A Txog Ajdu Fast travel X/Z: 15 / 24 m/min max. workpiece weight: 800 kg Rod passage: 110 mm Spindle power: 22 / 33 kW Torque gear stage 1: 175 / 263 Nm Torque gearbox stage 2: 700 / 1050 Nm Spindle speed: , U / min tailstock: Pinol diameter 110 mm, Pinol stroke 100 mm Number of tool stations: 12 driven stations toolholder: VDI50 Speed-driven tools: 4000 rpm (5 / 9.6 kW) Setup dimensions: 4203 mm x 1980 mm x 2090 mm Weight: 8000 kg

Condition: excellent (used), Three-jaw chuck Make Taylor diameter 280 mm centering 117,3 mm Chuck height 115 mm Kdjdpfx Agstuvpzs Aju Weight 30 kg

Condition: ready for operation (used), Year of construction: 2009, operating hours: 1,000 h, spindle speed (max.): 2,600 rpm, travel distance X-axis: 360 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 980 mm, spindle motor power: 22,000 W, overall weight: 7,000 kg, controller manufacturer: SIEMENS, controller model: 840D Solution Line, number of axes: 4, This 4-axis SPINNER TC800 was manufactured in 2009. It features a radial turret and is equipped with Siemens control, ensuring reliable operation. With approximately 1,000 operating hours, this machine has been barely used. If you are looking to get high-quality turning capabilities, consider the SPINNER TC800 horizontal turning machine we have for sale. Contact us for further details. • Control: Siemens 840D Solution Line • Rapid traverse X-axis: approx. 18 m/min • Rapid traverse Z-axis: approx. 24 m/min • Main spindle speed: up to approx. 4000 rpm Kodpfxjyv Epvs Ag Asdu • Main spindle power: approx. 24 kW (100%) • Main spindle power: approx. 33 kW (40%) • Spindle nose: A11 • Bar capacity: approx. 77 mm • Tool turret type: VDI 50 • Number of tool stations: 12 • Driven tools: Yes • Number of driven tools: up to 12 • Driven tool speed: up to approx. 4000 rpm • Maximum turning diameter: approx. 500 mm • Maximum swing over bed: approx. 800 mm • Maximum turning length: approx. 800 mm • Tailstock: Yes • Tailstock taper: MK4 • Tailstock stroke: approx. 100 mm • Tailstock force: approx. 8500 N • Voltage: 400 V • Frequency: 50/60 Hz • Control voltage: 24 V DC • Compressed air pressure: approx. 6–10 bar • Hydraulic pressure: approx. 70 bar • Chip conveyor: Yes • Coolant system: Yes • Hydraulic unit: Yes • Electrical cabinet: Yes • Radial turret • No quill • Barely used, approximately 1,000 operating hours Technical Specification Counter Spindle No Driven Tools Yes

Year of construction: 2009, condition: used, X-axis travel: 360mm, Z-axis travel: 980/1580mm, rapid traverse X/Z: 15/24m/min, max. turning diameter: approx. 500mm, max. swing diameter: 800mm, spindle nose: A11, bar capacity: 110mm, power (100%/40%): 22/33kW, torque gear stage 1: 175/263Nm, torque gear stage 2: 700/1,050Nm, turret type: servo turret, tool stations: 12, tool holder: VDI 50, number of driven tools: 12, driven tool speed: 4,000rpm, power (100%/40%): 5/9.6kW, axial torque (100%/40%): 18/35Nm, radial torque (100%/40%): 15/28.8Nm, hydraulic tank: 11l, central lubrication reservoir: approx. 2-3l, mains connection: 3/PE~ 400V, frequency: 50/60Hz, operating current (I_B): 63A, rated current (I_N): 80A, length: 3,250mm, width: 1,980mm, height: 2,090mm, weight: 8.5t, operating hours: 27,271h, including Spinner SERVO-LOAD 110 1500 bar feeder and documentation. On-site inspection is possible. Kjdjz R A I Uopfx Ag Aedu

Condition: excellent (used), Year of construction: 2021, Table size 3500 x 820 mm, table load 2500 kgs, traverses XYZ 3000 x 800 x 720mm, Rapid federate 50m/min, Spindle power 35Kw, spindle speed 18,000rpm, 30 station ATC, Kdjdpfxez Ha H Se Ag Aju Spindle taper CT40, Mazak Smooth Control, B axis +/- 110 degrees, C axis 0.001 degrees, Through spindle coolant, swarf conveyor.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, X-axis 3000 mm Y-axis 800 mm Z-axis 720 mm B-axis +/-110° C-axis 360° 48-position tool magazine High-pressure pump, 40 bar Renishaw RMP60 measuring probe Tool length measurement NC rotary table with 360,000 positions Kdedpfxezv N Ndj Ag Asu Chip conveyor, discharge to the left and more

Condition: ready for operation (used), Year of construction: 2015, A CNC vertical long-bed machining center Mazak is available. Travel X/Y/Z: 3000mm/800mm/720mm, B-axis: 110°, C-axis: 360°, table diameter: 600mm, long-bed table dimensions X/Y: 3500mm/820mm, max. table load: 2500kg, spindle interface: BT40, speed: 18000rpm, rapid traverse: 50m/min, tool stations: 48, coolant pressure: 70bar. Machine dimensions X/Y/Z: approx. 5250mm/3650mm/3200mm, weight: approx. 16100kg, control: Mazatrol Matrix 2, spindle hours: 18502h. Including rotary table Nikken CNC 601MA, high-pressure coolant, center partition wall, Renishaw probe, touch probe RMP 60Q, CAD/CAM software Topsolid 7.18 and postprocessor. Documentation available. An on-site inspection is possible. Kdedpfjx Ih Dmsx Ag Aju

Condition: ready for operation (used), Year of construction: 2009, operating hours: 26,180 h, spindle speed (max.): 2,500 rpm, travel distance X-axis: 360 mm, travel distance Z-axis: 980 mm, spindle motor power: 33,000 W, total height: 2,090 mm, total width: 1,980 mm, overall weight: 7,500 kg, bar diameter (max.): 110 mm, controller manufacturer: SIEMENS, product length (max.): 3,250 mm, workpiece diameter (max.): 500 mm, number of slots in tool magazine: 12, number of axes: 3, This 3-axis SPINNER TC 800 110 MC was manufactured in 2009. It features a collet chuck for clamping and includes a dust extraction system. Optional equipment includes a bar feeder, parts catcher, turret with driven tool, chip conveyor, and tailstock. If you are looking to get high-quality turning capabilities, consider the SPINNER TC 800 110 MC horizontal turning machine we have for sale. Contact us for further details. • Live Tool Speed: 4,000 rpm • Live Tool Power (100%/40%): 5 / 9.6 kW • Rapid Traverse X/Z: 15 / 24 m/min • Maximum Turning Diameter: approx. 500 mm • Maximum Swing Diameter: approx. 800 mm • Distance Between Centers: 800 mm • Main Spindle Nose: A11 • Main Spindle Power (100%/40%): 22 / 33 kW • Main Spindle Torque (Gear 1, 100%/40%): 175 / 263 Nm • Main Spindle Torque (Gear 2, 100%/40%): 700 / 1050 Nm • Coolant Tank Capacity: approx. 235 l • Hydraulic Tank Capacity: approx. 11 l • Central Lubrication Tank: approx. 2–3 l • Machine Weight: approx. 7,000–7,500 kg • Supply Voltage: 3/PE ~ 400 V • Frequency: 50 / 60 Hz • Operating Current (IB): 63 A Kdjdpfxozlqycs Ag Aeu • Rated Current (IN): 80 A • Collet Chuck Used for Clamping • Supply Voltage: 3/PE ~ 400 V • Frequency: 50 / 60 Hz • Operating Current (IB): 63 A • Rated Current (IN): 80 A • Collet chuck used for clamping • Dust extraction system Optional equipment: • Bar feeder • Parts catcher • Turret with driven tools • Chip conveyor • Tailstock Technical Specification Counter Spindle No Driven Tools Yes Taper Size VDI 50

Condition: excellent (used), Year of construction: 2019, Table size 3500 x 820 mm, table load 2500 kgs, traverses XYZ 3000 x 800 x 720mm, Rapid federate 50m/min, Kedpfezd Eqaox Ag Asdu Spindle power 35Kw, spindle speed 18,000rpm, 30 station ATC, Spindle taper CT40, Mazak Smooth Control, B axis +/- 110 degrees, C axis 0.001 degrees, Through spindle coolant, swarf conveyor.

Condition: new, Year of construction: 2026, functionality: fully functional, SPINNER TC800 with X=360mm, Z=900mm travel in a 45-degree inclined bed design with hardened and ground guide rails WITH driven tools WITH Y-axis POWER TURRET - WITH driven tool stations all tool stations can be driven on turret disks with a pitch circle or on the inner pitch circle designed as a servo turret Tool holder on the turret, System BMT65 Kjdpfx Agjrbhd Nj Aedu Number of tool stations in the turret: 12 SPINDLE 1 in a version up to 3,400 rpm - 85mm As an integrated motor spindle, with water cooling in modern synchronous technology with a hydraulic collet chuck, bar capacity 85mm, speed range 0-3,400 rpm, Pmax 80 kW / 930Nm Spindle nose DIN55026/A8 FOOT SWITCH TAILSTOCK in the program, movable by connecting to the Z-axis, hydraulically clamped to the bed. With an additional integrated hydraulic quill and bearing for a fixed center. FOOT SWITCH DIRECT MEASURING SYSTEM in the X-axis Control system SIEMENS 840DE with the following basic scope: - SPINNER - SPIOS 24" touch operating panel for I4.0 applications - Operating panel with adjustable height, rotatable and tiltable for best ergonomics - incl. engraving cycles - 24" liquid crystal flat color screen with multi-touch functionality - User memory 2 GByte - 15 zero-point offsets - 1 free USB interface - Ethernet interface standard SPINNER MULTI-CONTROL-WHEEL on the operating panel, integrating the following functions into a single control element: - Handwheel function in jog mode - Feed override in automatic mode - Start button and feed influence in single-block setup mode, automatically resetting to 0% at the end of the sequence -> all important functions of the setup mode integrated into one control element - SHOPTURN - 4-axis machining with a rotary axis - 3D SIMULATION of the finished part - REMNANT MATERIAL DETECTION - DXF reader CHIP CONVEYOR as a hinged belt conveyor, discharging to the right, incl. integrated coolant tank and conveying pump. HIGH-PRESSURE PUMP 15 bar CARTRIDGE FINE FILTER MEASURING PROBE for tool measurement in the working area incl. quick-change coupling STANDARD DOCUMENTATION in German consisting of a machine manual and CNC manuals is delivered in digital form on the control system. STANDARD PAINTING two-tone in light gray RAL7035 and blue-gray RAL5008 Electrical design EUROPEAN STANDARD as follows: Operating voltage 3x400V +/-10% Mains frequency 50Hz (+/-2%) TN system (5-conductor) Notes: The price includes warranty services only within Germany. In the case of new and demo machines, the pictures are not necessarily of the individual machine, but of comparable machines. Accessories shown, such as clamping devices or tool holders, are only included in the scope of supply as listed in the technical description. Please ask for a detailed offer ex works. Visit our factory near Munich or one of our showrooms. We may have other offers for comparable machines. Subject to prior sale.

Condition: ready for operation (used), Year of construction: 1984, Travel X/Y/Z: 1600mm/1000mm/1100mm, workpiece carrier (pallets) X/Y: 800mm/800mm-1000mm, change time: 38s, table rotation range: 360°, max. table load capacity: 2000kg, feed rate: 10m/min, rapid traverse: 15m/min, spindle power: 32kW, tool positions: 50, spindle taper: ISO50, speed: 4500rpm. Machine dimensions X/Y: 5800mm/5200mm, weight: approx. 25000kg. Documentation available. An on-site inspection is possible. Kjdpfxjxl Elye Ag Aodu

Condition: ready for operation (used), Year of construction: 2008, turning diameter 500 mm swing dia. 800 mm turning diameter over bed 450 mm turning length 800 mm x-travel 360 mm z-travel 980 mm spindle turning speed range 3200 U/min max. torque on the spindle 235/939 Nm spindle bore 110 mm turret (x-stations) 12 control Fanuc 31i tailstock quill taper MT 4 total power requirement 30 kW weight of the machine ca. 7,6 t dimensions of the machine ca. LBH 4,2 x 1,98 x 2,1 m - Machine with C-axis and driven tools - 2 driven tool holders Kdedpjz Ebvxofx Ag Aeu - 10 static tool holders - Incl. SMW 3-jaw chuck 315BB - Measuring arm - Chip conveyor - Incl. additional high-pressure pump

Condition: used, Fritz-Werner Model TC 800: Working areas: X-axis: 1,600 mm, Y-axis: 1,000 mm, Z-axis: 1,100 mm Workpiece carrier (pallets): Clamping surface: 800x800, 800x1,000 mm, changeover time: 38 sec Rotary table division: 360x1 degree, NC table (B-axis): 1/1000 degree, max. load capacity: 2,000 kg Travel paths: Y-axis (min-max): 150-1,150 mm table top/spindle center; Z-axis: 200-1,300 mm table center/front edge spindle Feed rates: Linear 10,000 mm/min; Circular 7,000 mm/min; Rapid traverse 15,000 mm/min Main spindle: Drive power 32 kW, front bearing diameter 100 mm. Steep taper ISO 50, speed range 20-4,500 rpm Weight approx. 25,000 kg Space requirement incl. pallet changer: approx. 5.8 x 5.2 m Kedpfx Agexura No Aedu Tool magazine: Number of stations: 50; chip-to-chip time 12.5 sec; tool change time 4 sec.

Year of construction: 2021, condition: new, machine/vehicle number: (Pitting Attachment) (Milling A, Field of application: Forestry Selling price: € 500, US$ 529,7 Taylor-made router (milling) attachment, pitting attachment Kdsdpfxen Tm Hwe Ag Aeu For detailed information, please contact us. Price is representative