Used Telemetry Division B1A-Cu10-Sd for sale (1,799)

Condition: used, Measurement data acquisition device, test device, telemetry system -Telemetry Division: Microdac B1A -Frequency: 10.7 MHz -Price: per piece -Number: 2 pieces -Dimensions: 220/105/H85 mm -Weight: 1.0 kg/piece Blodpfx Aqofg E E Uowel

Condition: good (used), Year of construction: 2004, operating hours: 24,500 h, functionality: fully functional, machine/vehicle number: 23940014, color channels: 3, resolution (max.): 320 dpi, paper width (min.): 82 mm, paper width (max.): 305 mm, paper height (max.): 914 mm, number of feeding trays: 4, total length: 2,200 mm, total width: 900 mm, total height: 1,700 mm, space requirement length: 2,360 mm, space requirement width: 1,100 mm, space requirement height: 1,900 mm, counter reading (color): 1,204,236, year of last overhaul: 2023, type of input current: AC, input current: 24 A, input voltage: 400 V, working width: 960 mm, Equipment: documentation/manual, For sale is a professional digital photo lab – complete system – ready for immediate use. Location: VISP, SWITZERLAND Highlights: - S4 Digital ICE scanner, - Original Noritsu CS-2 controller - Original EIZO ColorEdge CG21 color monitor, - Software version 5.02S.003, - Original installation CD and documentation available, - Automatic film transport carrier AFC (135/240), - 9 paper magazines. Inspection and test prints are possible by appointment. Technical data: - Exposure: RGB laser system (3 lasers) - Resolution: approx. 320 dpi - Print capacity: up to approx. 1600 prints/hour (10x15 cm) - Speed: approx. 15-17 prints/minute - Supported film formats: APS, 135 and 240 negative films/slides, 120 films 4.5x6 cm, 6x6 cm, 6x7 cm - Paper widths: 89/102/127/152/203/305 mm - Image formats: JPEG, TIFF - Original dongle available - Power supply: 3N-380/400 V, 50/60 Hz - Power consumption: approx. 10 A per phase - Weight: complete with scanner unit 620 kg. - Dimensions: 1170 x 760 x 1120 mm Scope of delivery: - Noritsu QSS 3202 SD - S4 Digital ICE scanner - CS-2 controller - EIZO ColorEdge CG21 Bedpfx Aqjzmh Awswell - Automatic film carrier - 7 paper magazines - Original installation CDs - Original manuals - Chemical racks: 5 x 1 l RA-4 developer starter, 6 x 10 l Enviroprint replenisher (paper developer) MP 60, 9 x 2 l RA-4BX-VR bleach-fix/regenerator - Accessories available upon request. Condition: The system comes from a well-known photo shop specializing in high-quality lab work and photos. It was used until the business closed (April 2026) and regularly serviced (most recently in 2023). It is in well-maintained condition. A total of 1,204,236 images have been printed, including 11,255 black and white and 7,367 index prints. According to the technical service of Noritsu-Veritec, the operating hours cannot be read from the system. They are estimated at 24,500 hours. The machine is being sold because of the owner's retirement and the closure of the business. Loading can be supported if required and by arrangement. Transport and installation must be arranged by the buyer. If you have any questions or are interested, please do not hesitate to contact us. Inspections are possible at any time by appointment. The machine is ideally suited for photo labs, dealers in used lab systems, spare parts dealers, universities and training centers, and collectors of professional Noritsu systems.

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: 19823 i 19251, input frequency: 50 Hz, input current: 116 A, working width: 3,100 mm, total width: 6,617 mm, total length: 6,900 mm, total height: 2,550 mm, overall weight: 11,000 kg, input voltage: 380 V, workpiece length (max.): 1,000 mm, workpiece width (max.): 3,100 mm, workpiece height (max.): 60 mm, type of input current: three-phase, actuation type: electric, Equipment: CE marking, documentation/manual, TECHNO KERNEL FD I SD – a line of 2 through-feed drilling machines. Bsdpezyrpnjfx Aqwsll Each machine has 6 upper and 6 lower drilling heads, with 2 independent motor units for each. On each unit, it is possible to install an assembly with 11 vertical spindles, arranged either along the X-axis or the Y-axis with a 32 mm spacing, or assemblies for dedicated machining operations. The first machine also has two horizontal drilling units, each consisting of 2 independent assemblies equipped with 11 spindles with a 32 mm spacing. In the second machine, instead of the horizontal spindles, there are 4 glue and dowel insertion units installed on each side. It is possible to load the components manually, or to connect the machine to automated loading and unloading systems for operation in a production line.

Condition: excellent (used), Year of construction: 2023, operating hours: 60 h, functionality: fully functional, machine/vehicle number: AE00003516, grinding width: 1,370 mm, overall weight: 1,800 kg, grinding height: 170 mm, workpiece height (max.): 170 mm, workpiece width (max.): 1,350 mm, - Wide-belt sanding machine DMC SD 70 RCS 135 - DMC SD 70 model, RCS 135 version First "R" unit with roller and second "CS" combination unit with roller/sanding pad - Working width mm 1,350 Min./Max. working height mm 4-170 Sanding belt dimensions mm 1,370x2,620 Main motor power kW (HP) 11 (15) Feed rate m/min 4.5/9 - 160/85 rubber-coated calibrating roller, diameter 160 mm, 85 Sh - 1st position - R160/45 rubber-coated sanding roller, diameter 160 mm, 45 Sh - 2nd position - Hard sanding pad with manual adjustment of the working height - Motor power, 1 unit: 11 kW (15 HP) - Electronic ammeter for the main motor to display current draw - Electronic display of the working height - Electronically controlled sanding belt oscillation Bljdpfxjzydafe Aqwel - Rubber pressure rollers - Kickback protection at the infeed before the first unit - Rubber feed carpet, 60 SH - Roller table with two rollers at the infeed and outfeed of the work table - Carpet feed with two speeds 4.5 / 9 m/min with gear motor - Automatic carpet centering

Condition: used, Year of construction: 2017, functionality: unexamined, R+P Stud Welding Cell Enclosed protective cell made of aluminum profiles Safety enclosure with protective doors Signal light Integrated control cabinet Documentation available Suitable for automated stud welding processes Nelson Stud Welding Machine Manufacturer: Nelson Stud Welding Type: SD-FSE 1000S Year of manufacture: 2017 Serial number: 1739289 Part No.: 80-07-57 Technical data: Supply voltage: 24 V DC / 90 V DC Input current: 1 A / 10 A Welding current: up to 2000 A (duty cycle 2%) Protection class: IP20 Bsdpfxjzvylpe Aqwjll Polarity: STD Scope of delivery: Welding gun Connection cable Mobile equipment cabinet Both units were last used together as an automatic stud welding system.

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 8481-05-K951, Edge finishing with fine grinding Bledpfjzv Eaxex Aqwsl We used this machine to process stair treads. 6 processing units: 1 x coarse grinding of the surface 2 x fine grinding of the surface 3 x profile milling on the top 4 x profile milling on the bottom 5 x profile grinding on the top 6 x profile grinding on the bottom Automatic feed – speed can be adjusted continuously Material thickness sensor The machine is equipped for processing stair treads with an edge rounding of r=8mm on the top and bottom (individually controllable). After cutting the treads to size on the circular saw or CNC machine, we completed the processing of the treads in a single pass from the top and bottom. The machine can also be adapted for other profiles, radii, or milling operations.

Condition: used, Year of construction: 2006, The equipment detailed here is a Sakurai 566 SD, manufactured in 2006. This model has dimensions of 660 x 508 mm and has produced approximately 85 million impressions. It is currently in production and located in Germany. The Sakurai 566 SD is equipped with several advanced features, including a Streamfeeder and the Sakurai Olivermatic Alcohol Dampening System, which enhance its efficiency and print quality. It also includes a delivery system and supports CIP 3 standards. This machine boasts a maximum speed of 15,000 impressions per hour, making it a high-speed option for large-scale printing tasks. Additional features include the SIS (Sakurai Interactive System), SCC (Sakurai Color Control), QSS (Quick Standby System), and SAS (Sakurai Auto Set), all of which contribute to its advanced capabilities and ease of use. These specifications make the Sakurai 566 SD a robust and efficient choice for high-volume printing operations. Format: 660 x 508 mm Equipment: Streamfeeder Sakurai Olivermatic - Alcohol Dampening System delivery Bjdpfszncmmox Aqwsll CIP 3 Max Speed: 15,000 iph SIS Sakurai Interactive System SCC Sakurai color control QSS quick standby system SAS Sakurai Auto Set

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 95/1543-1, heating capacity: 2.7 kW (3.67 HP), Equipment: type plate available, 1. Side channel blower: Manufacturer: ELEKTOR KARL W. MÜLLER Motor type: SD-600 230/400 V Power: 2.7 kW Speed: 2820 rpm Differential pressure: 300 mbar Volume flow: 4.6 m3/min 2. Material conveying device Bsdpfozudxkex Aqwjll Manufacturer: LANCO Type: LA 40-30-S Air pressure: 4-6 bar Power: 2.7 kW Serial number: 08071 CE-95

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, total height: 1,910 mm, total length: 4,400 mm, total width: 1,640 mm, overall weight: 1,700 kg, Equipment: CE marking, documentation/manual, Fine finishing and intermediate sanding of profiled individual parts in window construction, with automatic profile change in seconds. The soft-disc units create a homogeneous, matte surface and even out the growth rings, particularly effective with spruce. Brushing rollers work in a longitudinal direction, and four-sided units process rebates, overlaps, and profiles. The automatic immersion system prevents over-sanding of end-face edges. Bljdpfxszv Rfgj Aqwel Technical specifications: Workpiece width: max. 180 mm (230 mm for folding) Workpiece thickness: 12 to 120 mm Year of manufacture: 2025 Weight: 1,700 kg 400 V, 50 Hz, 26 A, fuse rating 35 A Directly from the manufacturer; inspection and sample processing possible at any time. Ex works Homberg-Caßdorf, price net plus VAT.

Condition: used, maximum load weight: 33,320 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 09/2018, loading space length: 13,640 mm, loading space width: 2,470 mm, total length: 13,860 mm, total width: 2,550 mm, total height: 3,900 mm, Equipment: ABS, KRONE SD – PLATFORM – BPW – 2 PALLET BOXES ----VEHICLE HISTORY * German vehicle * Video of the vehicle available upon request (interior & exterior views) ----Manufacturer Krone Model / Type SD * SANH platform Variant / Version Variant: DA06CLNF * Version: 1227XBF1 Vehicle Type Platform semi-trailer * Vehicle class: O4 First registration 05.09.2018 Axles 3 axles * BPW axles Brakes Disc brakes Suspension Air suspension Tires 385/65 R22.5 * Load index and speed index: 160 J * Identical tires on all three axles Equipment 2 pallet boxes Body Platform * Platform body Load compartment dimensions Length: 13.64 m * Width: 2.47 m Vehicle dimensions according to registration Total length: 13.86 m * Total width: 2.55 m * Total height: 3.90 m Weights Permissible total weight: 39,000 kg * Vehicle weight in running order: 5,680 kg * Permissible saddle load: 12,000 kg * Permissible axle load, 1st axle: 9,000 kg * Permissible axle load, 2nd axle: 9,000 kg * Permissible axle load, 3rd axle: 9,000 kg ----EXPORT SALES ONLY WITH DEPOSIT MIN. 500€ - 2000€ EXPORT SALES ONLY WITH DEPOSIT MIN. 500€ - 2000€----EXPORT REGISTRATION CUSTOMS EXW IN 10 MIN. (APPROVED EXPORTER) 5 DAYS, 30 DAYS REGISTRATION, AND 17 - 21 DAYS AUSTRIA REGISTRATION EURO 1 VEHICLE RESERVATIONS SHOULD ONLY BE MADE VIA THE EMAIL FUNCTION VERBAL RESERVATIONS ARE NOT VALID! For sales to EU and non-EU countries, a deposit of at least €500.00 / €1,000.00 will be charged. Bljdpfozx Ittsx Aqwsl Changes, errors and prior sale reserved! You can find more vehicles on our website: Sales are made exclusively according to our general terms and conditions - see website. Important note - Important information: Despite careful checking of all details in our offer, errors may occur. Some of these are caused by transmission errors in the systems of the various platform providers. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. Legal: This sales advertisement does not constitute an offer within the meaning of Section 145 of the German Civil Code (BGB). Rather, it provides information for the initiation of a contract. The information provided here is without guarantee and therefore does not constitute guaranteed characteristics.

Condition: good (used), functionality: fully functional, actuation type: hydraulic, punching force: 70 t, punching diameter: 28 mm, throat depth: 500 mm, overall weight: 1,600 kg, Used hydraulic punching machine Brand: GEKA Model: HYD 70-SD Serial number: 3659 Throat: 500mm Cutting capacity: Bljdsznh Shjpfx Aqwsl - L 90º: 130x130x13mm - Plate: 450x13mm - Round: 45mm - Square: 45mm - Notched: 250x250x6mm Maximum punching size: 28x20mm Tonnage: 70T Includes punches and dies as shown in the photographs. *Machine has been completely inspected and is in perfect working order.

Condition: excellent (used), Year of construction: 2011, MSB Cable Trolley Division 6 fold Holder for 20 rolls Own weight 600 kg Platform 180 x 130 cm Height 155 cm Roll diameter approx. 63 cm FY 2011 Shipment via forwarding agent possible, please contact us. Blodpofpcavofx Aqwel Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more articles - new and used - in our shop! International shipping costs on request!

Condition: excellent (used), Year of construction: 2022, operating hours: 216 h, functionality: fully functional, overall weight: 1,250 kg, rotor diameter: 260 mm, number of blades: 14, total length: 1,880 mm, total height: 1,670 mm, total width: 1,120 mm, rotor length: 550 mm, power: 18.5 kW (25.15 HP), rotational speed (max.): 120 rpm, hopper volume: 400 l, rotational speed (min.): 80 rpm, warranty duration: 3 months, Machine in very good condition. Manufactured in December 2022. Reuser SD 60, 18.5 kW The single-rotor universal shredder, Robust Reuser SD 600, is a symbol of strength, determination, and uncompromising performance. Bsdpfozlm T Esx Aqwjll It operates according to its own rules, but in perfect harmony with your needs. Its minimalist yet distinctive design gives it a touch of timelessness. Advantages: Single-rotor shredder Material feed via excavator, forklift, or hydraulic lifting arm Unitronics® PLC control unit Hydraulic unit with 20 liters of oil

Condition: used, Year of construction: 2017, The SD 500 industrial double-head saw with a hydropneumatic feed system for the cutting discs is a machine model with cutting discs that extend from below. As standard, the left head is fixed. The right head is mobile and is moved using a highly precise servo drive. The cutting length readout is completely independent of the drive for the mobile head. The machine is equipped with fixed stops for angles of 45º and 90º. Intermediate angles can also be achieved. Both heads are equipped with main vertical and horizontal clamping devices. The discs, set at an angle of 45º inwards, eliminate the need for corrections. Because the cutting discs extend from bottom to top and the main vertical clamping devices act on the profile at the point of its highest stiffness, the profile does not bend in the housing groove. This ensures that both the angles and planes are maintained, with the additional support of the horizontal clamping device. The machine's operation is controlled via an independent control panel equipped with a DELL PC. Standard equipment: independent control panel with a PC cutting length readout independent of the head drives (from a magnetic strip) electronic positioning of the mobile head automatic machine zeroing cutting of 2 to 4 profiles simultaneously discs extending from below in a / \ arrangement, eliminating the need for corrections hydropneumatic feed system for the cutting discs triple vertical and horizontal pneumatic clamping Bljdpfsznuk Rsx Aqwsl pneumatic adjustment of the disc extension angle (90°-45°) spacer between the heads, applied manually 4 outlets for industrial extraction, Ø100mm cooling system cutting length: min 300mm, max 3300mm roller guide at the mobile head, 3000mm

Condition: used, Year of construction: 2025, This is an external, dual-chamber water softening system manufactured by Hobart, model Hydroline Protect SD-H, year of manufacture 2025. The system has undergone a fresh inspection in our in-house workshop and is fully functional. The list price is €2,395 net / €2,850.05 gross. Our price: used, year of manufacture 2025: €1,290 net / €1,535 gross. Our used equipment service for you: 6-month warranty on all electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. High-quality branded equipment at fair prices. Professional overhaul/inspection and expert cleaning. Tested and fully functional – or your money back. Flexible shipping or self-collection options. Competent advice – before and after purchase. Provision of operating manuals, connection diagrams & spare parts. Testing according to DGUV V3. Technical data: Dimensions: W x D x H: 360 x 360 x 585 mm Weight with/without packaging: 21/19 kg Maximum water hardness: 40°dH Salt tank capacity: 20 kg Salt consumption per regeneration: 0.5 kg Continuous flow rate: 2-20 L/min Temperature: min. 2 / max. 65°C Condition: used, inspected, fully functional. Customer benefits: Optimally protects all downstream machines from limescale - extends maintenance intervals and service life. Cost-effective, external water softening system. Compact dimensions, removable castors. No power connection required. The system is regenerated in parallel with the rinsing process. The water softening system provides softened water 24 hours a day. Basic model: A high-quality ion exchanger removes the limescale-forming minerals from the water and adds water-soluble sodium salt in an exchange process. The total hardness of the raw water is thereby reduced to 0°dH. The water softening system consists of a pressure-resistant and corrosion-resistant tank. Tank material: plastic. Shipping: Delivery or self-collection by arrangement. Worldwide shipping on request. Shipping to islands or mountain stations only by arrangement. Subject to change and errors. Do you have any questions, would you like advice, or would you like to see something on site? You can reach us by telephone during our opening hours: Monday to Friday, 9:00 a.m. to 1:00 p.m. and 2:00 p.m. to 5:00 p.m. The sale is exclusively subject to our general terms and conditions (GTC). Blsdpfx Aezt Idneqwol

Condition: used, functionality: fully functional, machine/vehicle number: 050526, input voltage: 230 V, overall weight: 40 kg, Hello, we are offering a nice, small Roku Print SD 05 for sale. The system is in top condition and has only been used very little for prototype production. This small system features a vacuum printing table. The height of the printing material can be adjusted using the small hand control unit. All the important parameters, such as printing speeds, flood speed, screen clamping, etc., can be easily entered via the hand control unit. In addition, the system is equipped with an adjustable printing table in the x and y directions, which can also be rotated. This is not a standard feature, but rather a special design with table adjustment. The system is a good alternative for those who need to print small parts and for whom Thieme and ATMA screen printing systems are too large. Bjdpfxozll N Sj Aqwoll It is an ideal machine for "small parts printing". The machine requires a standard 230-volt connection and compressed air. If you are interested, we would be happy to demonstrate the system. Please feel free to contact us if you have any questions.

Condition: like new (used), functionality: fully functional, Year of construction: 2025, TECHNICAL SPECIFICATIONS • Punching force: 850KN / 85 tons • Punching: Ø40x15mm • Cuts per minute (stroke 20mm): 40 • Throat depth: 500mm • Stroke: 70mm • Cutting of L-shaped profiles at 90º: 120x120x10mm • Flat bars: 450x15mm • Round bars: Ø45mm • Square bars: 40mm • Triangular notching: 130x130x12mm • Bending: 200x12mm Bsdpfx Aezg Dxbeqwoll • Motor: 9KW • Net weight: 2500Kg

Condition: used, Year of construction: 2008, Surface grinding machine, Geibel & Hotz FS 840 SD, manufactured in 2008. Bodpfx Aezu Aq Ssqwsll

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 08/2014, total length: 14,010 mm, total width: 2,500 mm, suspension: air, wheelbase: 8,940 mm, color: blue, Year of construction: 2014, Axle configuration Make axles: BPW Brakes: drum brakes Rear axle 1: Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Weights Empty weight: 4.220 kg Carrying capacity: 36.780 kg GVW: 41.000 kg Maintenance, history and condition Bsdpfx Aqezxh Iwewsll APK (MOT): tested until 03/2027 Technical condition: good Visual appearance: good Identification Registration number: ON-75-JR Additional information Please contact Arie or Pedro for more information = Additional options and accessories = - Air suspension - Twist-locks = Remarks = Krone SD 45FT / 4220 kg / Container Chassis / BPW + Drum

Condition: used, empty load weight: 6,560 kg, maximum load weight: 29,440 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 02/2020, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,845 mm, suspension: air, tire size: 435/50R19.5, color: grey, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, tail-lift, Vehicle location: en route / in transit, aluminum rims, 3 axles, air suspension, 1st axle can be lifted, raising and lowering function, ABS (anti-lock braking system), Edscha, curtain, lashing rails, hydraulic ramps, lateral aluminum side protection, supports, lateral strap tensioners, storage compartment. Bljdpfx Aszym Sdsqwsl Superstructure: 3-axle motorcycle transport trailer with a double-deck configuration, liftable roof, Edscha canvas cover & hydraulic ramp, 3 x 9-ton Krone axles, disc brakes, 1st axle can be lifted, 30mm thick, waterproof plywood floor, Edscha volume sliding canvas cover, hydraulic liftable roof with a total lift of 500mm, PVC tarpaulin 850g/m2, roof tarpaulin ADR 680g/m2, RSAB system, airline rail system, 2" King Pin, corner dimension 2040mm, saddle height unladen approx. 980mm! All information is provided without guarantee, as the trailer is currently en route! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors!

Condition: used, axle configuration: 3 axles, first registration: 08/2016, suspension: air, tire size: 435/50R 19.5, color: other, Year of construction: 2016, Equipment: ABS, = Additional options and accessories = - Air Suspension - Disc brakes = More information = Axle configuration Tyre size: 435/50R 19.5 Make axles: BPW Brakes: disc brakes Suspension: air suspension Axle 1: Tyre profile left: 30%; Tyre profile right: 30% Bljdpfx Aozx Sfmoqwsl Axle 2: Tyre profile left: 30%; Tyre profile right: 30% Axle 3: Tyre profile left: 30%; Tyre profile right: 30% Weights Empty weight: 6.106 kg Carrying capacity: 32.894 kg GVW: 39.000 kg

Condition: used, axle configuration: 3 axles, first registration: 10/2012, suspension: air, tire size: 385/65 R22.5, color: other, Year of construction: 2012, Axle configuration Tyre size: 385/65 R22.5 Axle brand: Mercedes-Benz Bjdpszxmlbsfx Aqwell Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Tyre tread left: 5 mm; Tyre tread right: 5 mm Rear axle 2: Tyre tread left: 5 mm; Tyre tread right: 5 mm Rear axle 3: Tyre tread left: 5 mm; Tyre tread right: 5 mm Weights Unladen weight: 6,900 kg Payload: 34,100 kg Gross vehicle weight: 41,000 kg Condition Damages: none

Condition: used, maximum load weight: 29,412 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 10/2019, next inspection (TÜV): 03/2027, loading space length: 13,600 mm, loading space width: 2,520 mm, loading space height: 2,690 mm, total length: 13,860 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2019, Equipment: ABS, KRONE SD – PR.+PL. – SAFETY ROOF – BPW – LIFT – ----VEHICLE HISTORY * 1st OWNER * GERMAN VEHICLE * VIDEO AVAILABLE UPON REQUEST ----Vehicle Data Krone SD / DA06 * Registered: 10/2019 * 3-axle semi-trailer Body: Curtainsider / Sliding Tarp * Edscha sliding roof * Code XL * Storage box Axles & Suspension: BPW axles * Lift axle * Air suspension * 3 axles Brakes & Tires: Disc brakes * Pneumatic braking system * Tires: 385/65 R22.5 External Dimensions: Length (L): 13.86 m * Width (W): 2.55 m * Height (H): 4.00 m Internal Dimensions: Length (L): approx. 13.60 m * Width (W): approx. 2.52 m * Height (H): approx. 2.695 m Weights: Permissible total weight: 36,000 kg * Technically permissible total weight: 39,000 kg * Unladen weight: approx. 6,588 kg * Technically permissible axle load: 3 x 9,000 kg Load securing: DIN EN 12642 Code XL * VDI 2700 Sheet 12 * Daimler Load Securing 9.5 * Certified curtainsider body Inspections: TÜV (technical inspection) valid until 03/2027 * Inspection (SP) valid until 09/2026 * Last TÜV inspection passed without any defects * Last inspection passed without any defects ----* EXPORT SALES ONLY WITH DEPOSIT MIN. 500€ * EXPORT SALES ONLY WITH DEPOSIT MIN. 500€ - 2000€ EXPORT REGISTRATION CUSTOMS EXW IN 10 MINUTES (APPROVED EXPORTER) 5 DAYS, 15 DAYS, 30 DAYS LICENSE PLATES AND 15 DAYS AUSTRIAN LICENSE PLATES EURO 1 Bsdszv Hbwepfx Aqwoll TECHNICAL DATA SHEET VEHICLE RESERVATIONS PLEASE ONLY VIA THE E-MAIL FUNCTION VERBAL RESERVATIONS ARE NOT VALID For sales to EU and third countries, a deposit of at least €500.00 / €1,000.00 will be charged. Changes, errors and prior sale reserved! You can find more vehicles on our website. Sale is exclusively subject to our general terms and conditions – see homepage. Important Note – Important Information: Despite careful checking of all details in our offer, errors may occur. Some of these are caused by transmission errors in the systems of the various platform providers. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. Legal: This sales advertisement does not constitute an offer within the meaning of §145 BGB. Rather, it is information for the purpose of initiating a contract. The information provided here is without guarantee and does not therefore constitute guaranteed characteristics.

Condition: used, axle configuration: 3 axles, first registration: 06/1992, suspension: air, tire size: 9.5R17.5, color: red, Year of construction: 1992, Self-tracking axle / trailing steering. Extendable. Loading bed length: 930 cm x 253 cm Loading height: 90 cm. Extendable. = Further Information = Axle configuration Tire size: 9.5R17.5 Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Twin tires; Tread depth left inner: 30%; Tread depth left outer: 30%; Tread depth right inner: 30%; Tread depth right outer: 30% Rear axle 2: Twin tires; Tread depth left inner: 30%; Tread depth left outer: 30%; Tread depth right inner: 30%; Tread depth right outer: 30% Rear axle 3: Twin tires; Steerable; Tread depth left inner: 30%; Tread depth left outer: 30%; Tread depth right inner: 30%; Tread depth right outer: 30% Weights Unladen weight: 9,985 kg Payload: 35,015 kg Gross vehicle weight: 45,000 kg Maintenance APK (Dutch MOT vehicle inspection): valid until 11/2026 Identification Model number: SD 31 / SEMI TRAILER / EXTENDABLE Bledpfx Aey N S Rmjqwol = Company Information = ALL PRICES ARE NET FOR EXPORT. Joris Versteijnen (NL-DE-GB), Wouter Greutink (NL-DE-GB-ES-IT). We speak Russian. We do our best to provide correct information, however, no rights can be derived from the listed texts.

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, grinding width: 1,350 mm, SCM Wide Belt Calibration and Fine Sanding Machine Model: dmc sd 60 RCS 135 Technical Specifications: Working width: 1,100 mm Min./max. working height: 4–170 mm Abrasive belt width: 1,120 mm Abrasive belt length: 2,150 mm Main motor power: 11 (15) kW (HP) Gear motor: 0.45/0.8 (0.6/1.1) kW (HP) Feed speed: 4.5/9 m/min Standard equipment: - R140/85 rubber-coated calibration roller, diameter 140 mm, 85 Shore - 1st position - R160/45 rubber-coated sanding roller, diameter 160 mm, 45 Shore - 2nd position - Hard sanding pad with manual working height adjustment - Motor power for unit 1: 11 kW (15 HP) - Electronic ammeter for main motor indicating current draw - Electronic work height display - Electronically controlled sanding belt oscillation Bsdpetwqn Sjfx Aqwsll - Rubber pressure rollers - Anti-kickback device at infeed before first unit - 60 Shore rubber feed belt - Roller table with two rollers at infeed and outfeed of working table - Feed belt with two speeds 4.5 / 9 m/min driven by gear motor - Automatic belt centering Including the following special accessories: 1 pc. version "B" for RCS with: pneumatic on/off for roller 1st unit “R” + pneumatic on/off for roller 2nd unit “CS” + “MESAR” elastic segmented sanding pad + pneumatic on/off for sanding pad unit + electronic programming unit “LOGIC 50” + electronic working height adjustment 1 pc. CE safety standards 1 pc. roller table at infeed and outfeed for long workpieces, equipped with 5 non-driven rollers 1 pc. "RA" diagonally grooved steel contact roller, 1st unit 1 pc. main motor 15 kW 1 pc. abrasive belt wear optimizer 1 pc. LED interior lighting 1 pc. door with viewing window on rear side 1 pc. Logic SC control