Used Telwin Column Pointer for sale (5,039)

Condition: new, Technical specifications Two-phase mains voltage : 400 V. Mains frequency : 50/60 Hz. Max. puncture current : 9700 A. No-load voltage MAX : 2,6 V. Thickness MAX tacking 2 sides : 3+3 mm. Max electrode force : 190 daN. Arms projection : 330 mm. Nominal power X=50% : 22 kw. Nominal power X=50% : 15 kw. Power factor : 0.7 (cosphi). Intermittence ratio : 15%. Dimensions : 79 - 32 - 128 cm. Weight : 118 kg. Resistance welder (tacking machine) with column, swinging arm, with digital microprocessor control. The multifunction LCD digital panel allows to operate: in EASY mode (setting of current and tacking time); in EXPERT mode (setting of different tacking parameters) with the possibility to save up to 20 customized programs. Continuous and pulsed operation guarantees excellent welds on various types of steels. Features: adjustment of the welding current (%), welding time (cycles), pressure and speed of electrode closing choice of various welding cycle parameters (approach time, ramp time, welding time, pause time and number of pulses) easy-to-read LCD display pneumatic drive Cgedshzg Ihspfx Ad Ast thermal protection with signaling air flow regulation for the slowing down of the arms closure Model requires cooling

Condition: good (used), 1 x Syspal column lifter type 600/scb-1480 for 200 and 300 litre eurobins. Located Wiltshire. UKFM1- 6623 Cgjdevq N Duopfx Ad Ast

Condition: used, Year of construction: 1966, pressure 040 t Cgedpoy Nd Svjfx Ad Ast throat 240 mm stroke 8- 88 mm number of strokes - idle run 130 /min shut height (stroke down, adjustm. up) 320 mm ram adjustment 63 mm table surface area 560 x 435 mm ram surface 250 x 200 mm hole in the table 150 mm table height over floor 950 mm total power requirement 4 kW weight of the machine ca. 3,3 t dimensions of the machine ca. 1,7 x 0,85 x 2,4 m

Condition: used, Year of construction: 1976, pressure 025 t table-size 500 x 400 mm ram stroke - adjustable min/max 20- 120 mm throat 250 mm ram surface 350 x 250 mm strokes of ram per min. 120 shut height (stroke down, adjustm. up) 300 mm Cgjdpjy Nd Spefx Ad Aet ram adjustment 60 mm tool shank hole (depth x diameter) 32 x 80 mm hole in the table 180 mm weight of the machine ca. 1,6 t Machine has adjustable table (150 mm).

Condition: excellent (used), Year of construction: 2016, Column jib crane, overhead crane, workstation crane -Manufacturer: KWG, Column jib crane type VS, lifting capacity 2500 kg Csdey I Aknopfx Ad Asgt -Accessories: A wireless remote control (transmitter/receiver) can be supplied for an additional charge. -Base plate: Ø 820 mm -Load capacity: 2500 kg -Chain hoist: ABUS type GM 6 2500.3-2, year of manufacture 2016 -2x lifting speed: 3.0/0.8 m/min -Drive system: yes -Swivel drive: yes -Projection: 5640 mm -Total height: 5060 mm -Hook height: 3830 mm -Swivel range: 360° -Transport dimensions: 1660/5870/H2460 mm -Empty weight: 2011 kg

Condition: used, machine/vehicle number: 4396, pressing force: 200 t, pressure:200 t distance between columns:1200x1000 mm Cgsdpfx Adsfxyh Ae Aot stroke:600 mm total power requirement:32,5 kW weight of the machine ca.:20,5 t draw back pressure:20 t :1 Stück voltage:400 V frequency:50 Hz :24 V :Rexroth/Bosch dayligth:800 mm working area:1200x1000 mm :1200x1000 mm work height max.:1100 mm :170 mm/sek. :150 mm/sek. :15 mm/sek. quantity of oil:500 l :220 V memory:200 Programme :20-200 über Monitor t :5-170 mm/sec. :0-10 sec :2-10 mm/sec :750x950 mm :300 mm :5-50 t :2-80 mm/sec :1000 kg

Condition: ready for operation (used), Year of construction: 1973, machine/vehicle number: 22123, functionality: fully functional, pressing force: 315 t, table width: 1,500 mm, table length: 2,500 mm, TECHNICAL DETAILS Pressing force: 315 t Table width: 1,500 mm Table length: 2,500 mm Max. working area: 883 mm MACHINE DETAILS Dimensions: 3.0 m x 1.6 m x 4.5 m EQUIPMENT Separate hydraulic power unit Cjdpfxjy Nbtke Ad Aegt Control panel

Condition: used, Year of construction: 2002, pressure 80 t throat 300 mm stroke 8-110 mm no. of strokes 100 Hub/min ram - range of adjustment 75 mm Cedpfx Ajy I Dd Nsd Aogt table surface area 750x590 mm ram surface 540x400 mm hole in the table 200x200 mm table height 780 mm tool hole in ram Ø 40 mm total power requirement 11 kW weight of the machine ca. 5,5 t dimensions of the machine ca. BxTxH 1200x1700x2700 mm

Condition: used, Year of construction: 2008, pressure 40 t throat 230 mm stroke 4-100 mm table surface area 650x450 mm ram surface 420x220 mm ram - range of adjustment 85 mm Csdpfxjy I Ddvs Ad Ajgt hole in the table 170x220 mm table height 800 mm no. of strokes 60 Hub/min dayligth 375 mm Dimensions (HxWxD) 2800x1200x1900 mm weight of the machine ca. 3,2 t

Condition: good (used), Year of construction: 2014, Table size 6000 x 1100mm, traverses X Y Z 4500 x 1600 x 1300mm, maximum workpiece weight 5000kgs, spindle taper DIN 50, toolchanger capacity 40 stations, spindle speed 5,000rpm, automatic head, swarf conveyor, 4th axis rotary table Cgjdpey Ey Rtefx Ad Ajt

Condition: used, Year of construction: 1962, pressure 060 t throat 220 mm stroke 6 - 94 mm no. of strokes 115 /min distance table/ram, max. stroke up, adjustment up 340 mm table surface area 680 x 400 mm hole in the table 120 x 70 mm table height over floor 750 mm passage to the back 290 mm ram surface 240 x 240 mm ram adjustment 57 mm power requirement 3,7 kW weight 2,8 t dimensions (WxDxH) 1,5 x 1,5 x 2,2 m Cedpfsyq Sl Sjx Ad Asgt SPECIAL DEAL as is where is, WITHOUT additional work free loaded to truck

Condition: used, Year of construction: 1985, pressure 6,3 t stroke 250 mm throat 150 mm dayligth 440 mm table surface area 330 x 270 mm table height over floor 970 mm Cjdpfxsyfwvle Ad Aegt ram surface 65 mm oil volume 30 l power requirement 1,5 kW dimensions (WxDxH) 0,8 x 1,3 x 2,4 m with oil-hydraulic drive, light-guard (make Sick C 4000), controllable dependent on pressure/time and way, upper and lower stroke limitation, mechanical depth stop, two-hand operation as is where is, WITHOUT additional work, free loaded to truck

Condition: used, Year of construction: 2011, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,700 mm, travel distance Z-axis: 1,200 mm, total length: 13,700 mm, total width: 10,000 mm, total height: 5,300 mm, KEKEISEN PFW-T 4000/12 portal milling machine in heavy-duty, rigid design for machining large and heavy workpieces. Travel distances of 4,000 x 2,700 x 1,200 mm and a large worktable measuring approx. 4,000 x 1,800 mm with a table load capacity of 10,000 kg enable the machining of high-volume components. Codpfey Ncgfsx Ad Ajgt The machine is equipped with a universal milling head featuring 2 swivel axes and 5 adjustable positions (manual or optionally NC-controlled). Hirth gearing ensures precise angular positioning. Powerful main spindle drive with approx. 30 kW (partially 37 kW), speed range 20–2,000 rpm, optionally up to 4,000 / 7,000 rpm, and a maximum torque of approx. 1,787 Nm – ideal for heavy-duty machining. Further features include a 60-position tool changer (KWE60), chip conveyor, KNOLL filtration system, Hydac cooling units, and centralized lubrication. Feed rates up to 4 m/min, rapid traverse up to 18 m/min, and feed forces of approx. 30,000 N per axis underline the robust construction of the machine.

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 7,000 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 1,400 mm, feed length X-axis: 7,000 mm, feed length Y-axis: 1,600 mm, feed length Z-axis: 1,400 mm, Complete with all assemblies required for installation and commissioning x = 7 m y = 1.6 m z = 1.4 m (800 mm + quill = 600 mm) General overhaul in 2007, year of manufacture 1991 Rapid traverse: 12,000 mm/min; w-axis: 6,000 mm/min Fitted with new Siemens Sinumerik 840D control system, new drive motors, refurbished guideways, and new control cabinets. ECOCUT 1 was only operated for a few hours thereafter. TDV 2 rotary table, max. workpiece weight 6 t / clamping area 1,000 x 1,000 mm TDV 3 rotary table, max. workpiece weight 12 t / clamping area 1,250 x 1,600 mm Cjdpsy I S E Uofx Ad Aogt Accessories: 2 right-angle milling heads / chain-type automatic tool changer / platen table / full enclosure / Knoll hopper feeding system / extraction unit / coolant system with belt filter. Supplied with all BWF fixtures required for installing the machine bed and clamping plate.

Condition: good (used), Year of construction: 1999, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,150 mm, Control: Siemens 840 D Powerline Tool holder: HSK-A63 Max. rpm: 16,000 X-travel: 3,000 mm Y-travel: 2,500 mm Z-travel: 1,150 mm A-axis: +/- 100 mm C-axis: +/- 181.5 mm Csdpfx Adey Iwr Tj Aegt Table size: 3,000 mm x 2,500 mm Option: External blowing air Kinematics: Fork head

Condition: used, Year of construction: 1959, Manufacturer: DANLY, Model: S4-800-132-72, Year of manufacture: 1959, Max. pressure: 800 t, Table clamping surface: 3,350 x 1,830 mm, Ram clamping surface: 3,350 x 1,830 mm, Ram stroke: 610 mm, Ram adjustment: 508 mm, Strokes per minute: 12 - 16, Sliding table, Table cushion pressure: 11 - 113 t, Table cushion stroke: 203 mm, Ram cushion stroke: 152 mm, Press control with operator panel, discharge handling robot (manufacturer), Strothmann robot (not functional), control and switch cabinets, accessories Codpfjx R Eftox Ad Aogt +++ Attention: Machine is part of an online auction! +++

Condition: used, Year of construction: 1994, Make: HYDRAP, Model: HPDZ b 1600, Year of manufacture: 1994, Serial No.: 6784, Max. pressure: 1,600 t (ram 1,000 t + blank holder 600 t, can be coupled), Sliding table, 3,600 x 2,200 mm, Ram clamping area 3,620 x 2,200 mm, Ram stroke 1,500 mm, Table draw cushion pressure 36 - 360 t, Table draw cushion stroke 450 mm, Press control, Operator panel, swiveling, Linear robot Strothmann Cgodex Ry Tfopfx Ad Aet +++ Note: Machine is part of an online auction! +++

Condition: used, Year of construction: 2001, Manufacturer: SCHULER SMG, Model: HZPU-T 1000-2500/2100, Year: 2001, Serial No.: 7.5592, Press force: 1,000 t, Die change table 2,500 x 2,100 mm, Ram surface 2,500 x 2,100 mm, Max. ram stroke: 1,300 mm, Table draw cushion force: 30–200 t, Draw cushion stroke: 300 mm, Press control with Siemens Simatic OP 37 HMI, Control and switch cabinets. +++ Attention: Machine is part of an online auction! +++ Cedpfxox Ry Nte Ad Aogt

Condition: used, Year of construction: 1965, Make: MÜLLER, Model: BZE1600-35.2.1, Year of manufacture: 1965, Serial no.: 902, Max. press force: 1,600 t (ram 1,000 t + blank holder 600 t; can be coupled), Sliding table, 3,500 x 2,750 mm, Ram clamping area 3,500 x 2,750 mm, Ram stroke 1,400 mm, Ram adjustment 350 mm, Cushion force (table) 36 - 360 t, Cushion stroke (table) 250 mm, Hydraulic tool clamping on ram, Press control, Manufacturer: Siemens, Type: Simatic S7, Operator panel: Simatic OP37 Cgodpfxsx Rzkxe Ad Aot +++ Attention: Machine is part of an online auction! +++

Condition: used, Year of construction: 2002, x-travel 16300 mm y-travel 2600 mm z-travel 1600 mm Control Heidenhain type TNC 430 tool taper ISO 50 spindle turning speed range 22-4000 U/min feed in x - axis 36000 mm/min feed in y - axis 24000 mm/min feed range Z-direction 24000 mm/min main drive motor 37 kW Tool changer 90 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Cgodpfxeyq Swus Ad Ajt Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: new, Year of construction: 2026, pressing force: 30 t, DURENDUS 30 T Heated Press – Double-column Press – 700 × 500 mm Heated Plates, Sliding Table The machine shown here was built to a customer’s order and has already been delivered. We can manufacture this machine for you at short notice – including consideration of individual options as required. This is a hydraulic heated press with electrically heated platens and a manual sliding table for pressing, laminating, and forming processes under elevated temperature conditions. Base price: €23,500 net Options (on request): The listed options are based on completed customer projects and enable targeted adaptation of the machine for the respective application. The base machine is a functional standard version – in practice, it is usually supplemented with additional equipment and configured specifically for the project. ==== Technical Data & Information: ==== General Information * Design: Double-column press * Pressing force: 30 t (adjustable) * Total weight: approx. 3,200 kg * Dimensions (W × D × H): 2,000 × 1,500 × 2,850 mm ==== Working Area * Table size: 700 × 500 mm * Heated plates: 700 × 500 × 65 mm * Installation height: max. 800 mm * Table traverse: 500 mm (manual) ==== Table & Ram * Ram stroke: 600 mm * Cylinder diameter: Ø 130 mm * Piston rod: Ø 80 mm * 8-fold guide for parallelism ==== Speeds * Working speed: 9 mm/s * Return speed: 25 mm/s ==== Hydraulics & Drive * Working pressure: max. 240 bar * Pump capacity: 12 l/min * Motor power: 3 kW * Hydraulic tank: 80 l * Pressure accuracy: ±5 bar * Hydraulic system with air cooling ==== Controls & Operation * SIEMENS S7-1200 controller with 7" touch panel * Programmable parameters (stroke, pressure, time, cycles) * Two-hand operation * Electrical connection: 400 V / 50 Hz * Total connected load: approx. 25 kW (including heating) ==== Equipment Cedpfx Aoy H Dtzsd Aogt * Electrically heated press plates up to 200 °C * Temperature monitoring with sensors * Passive pressure holding function up to 60 minutes * Hydraulic and electronic overload protection * Safety limit switches * CE certification * Two-layer coating according to RAL standard ===== Hot pressing, laminating, plastics processing, rubber and composite material processing, molding Heated press, hydraulic press, double-column press, thermal press, laminating press, industrial press Are you looking for a hydraulic press tailored to your application? Contact us for an individual offer. Our hydraulic presses are manufactured in accordance with German Machinery Directives as well as European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they fully conform to the Brazilian national safety guideline NR 12, which is based on these standards. Our core strength is special machine construction and press automation. We supply custom-built hydraulic presses at surprisingly competitive prices. For the hydraulic components of our presses, we primarily use parts from leading European manufacturers.

Condition: used, faceplate diameter 1400 mm swing diameter 1600 mm turning height 1200 mm Csdpfsyuqdzjx Ad Aogt turning speed range - milling 1 - 240 U/min Control Siemens SIN 820T ram head - cross travel 1000 mm total power requirement 55 kW A.T.C. 12 positions Tooling

Condition: used, Single-column eccentric press WEINGARTEN type E 40 Machine. No. 643/62 Year of construction 1963 Pressure capacity 40 ton. throat depth 250 mm Table opening 150 x 80 and Ø 200 mm Table surface 560 x 460 mm ram surface 250 x 200 mm Plunger stroke adjustable 8-88 mm Plunger adjustment 63 mm Installation height 320 mm Clamping pin bore Ø 40 mm Stroke rate 100/130 strokes / min. Motor power 2.2 / 3 kW Mains connection 400 Volt, 50 Hz Table height above floor 840 mm - Clutch/brake combination with WEINGARTEN friction threaded clutch with TDC run-through protection Cjdstx E Rqjpfx Ad Ajgt - Electric lift release via two-hand control - Overload protection by breaker plate - Manual central grease lubrication - Front crankshaft support bearing - Control cabinet adjacent - UVV for manual insertion work Space requirement L x W x H 1800 x 1500 x 2200 mm Weight 3.1 tons

Condition: used, Year of construction: 1989, Used machine Year of manufacture: 1989 Equipment and technical data: Drilling capacity: 16/20 mm (temporarily up to 23 mm) Morse taper MK 2 Throat depth: 245 mm Drilling depth: 100 mm Column diameter: 82 mm Cgsdpfxjy Ih Tzs Ad Aot Table size: 220 x 310 mm Motor power: 0.75 kW Spindle speeds: 340-530-900-1530-2400 rpm Weight: 132 kg Availability: short notice Location: 63934 Röllbach

Condition: used, Year of construction: 2018, • Brand: FAGIMA FRESATRICI • Model: JAZZ L • Year of manufacture: 2018 • 5 axes • Fixed table dimensions: 1,250x800 mm, maximum load capacity: 1,000 kg Cgedpfjy I A Dbox Ad Aot • Rotary table dimensions: 600x600 mm, maximum load capacity: 500 kg • Total travels: 2,000x600x550 mm • Travels on fixed table: 1,250x600x550 mm • Travels on rotary table: 600x600x550 mm • Equipped with: scraping chip conveyor, workpiece measurement probe, through-spindle coolant system • The machine is not connected to power and is partially disassembled; therefore, it has not been possible to verify its correct operation. • Externally, it is in good general condition, with no damages or deformations detected.