Used Tf Gmbh Tfa 1001 S for sale (103,984)

Condition: used, Year of construction: 2003, machine/vehicle number: 1964, Coil weight: 500 kg Material width: 41 mm Coil exterior diameter: 1.000 mm Expansion range: 250 - 500 mm Speed: 20 m / min Bodouqc Ivopfx Ahmsln Required power: 0,5 kW Dimensions L x W x H: 1.000 x 850 x 1.700 mm Weight of machine approx.: 200 kg

Condition: repair required (used), Year of construction: 1985, functionality: limited functionality, machine/vehicle number: 11710519, spindle bore: 1,250 mm, spindle motor power: 56,000 W, quill travel distance: 1,000 mm, workpiece weight (max.): 1,600 kg, Equipment: documentation/manual, Basic machine information Machine type: CNC vertical lathe Manufacturer and model: Schiess AG - Schiess Moweg GmbH; Type 12DS100 Schiess Year of manufacture: 1985 Serial number: 11710519 Technical condition: Machine is operational; used, requires repair Technical specifications Working range: Table dimensions - Pallet D=1000 [mm], max. turning height H=800 [mm], max. turning diameter D=1250 [mm] Tailstock stroke S=1000 [mm]; adjustable cross slide - positioning every P=500 [mm] Table load capacity: 1600 kg Control system type: Siemens - Sinumerik 840 D Main drive power - 56 kW; Maximum spindle speed: 500 rpm Bledpfjzvnbxjx Ahmjn Axis positioning accuracy: 0.02 [mm] - axis measuring system: optical scales Axis feed rate - "rapid": 6000 mm/min Axis feed rate - "working": 0.1 - 2000 mm/min Coolant - yes - through the tool Number of axes: 2-axis lathe Drive type: servo drives Additional equipment Tool magazine: 12 positions Material feeding system: loading station at the pallet magazine Palletizing system - 2-pallet magazine; pallet loading station; machine table - total of 2 pallets Chip transport system - yes Cooling system - control cabinet air conditioning - yes Operating manual - paper version in Polish and German, digital version in German

Condition: like new (used), Year of construction: 2016, operating hours: 500 h, functionality: fully functional, spindle speed (max.): 24,000 rpm, Gravograph IS 6000 IQ – CNC engraving machine – approx. 500 operating hours For sale is a very well-maintained Gravograph IS 6000 IQ with only approx. 500 operating hours. The machine is suitable for engraving and milling operations, for example, for the production of signs, lettering, and customized engravings. Machine data: Manufacturer: Gravograph / Gravotech Model: IS 6000 IQ Year of manufacture: 05/2016 Operating hours: approx. 500 Condition: used, very well maintained Equipment: Engraving software GS8-GRAPHIC incl. dongle Stable machine table with T-slots for workpiece clamping Matching base frame Wired handheld control unit Extraction device on the machining head Spray device 750-W HF spindle kit for the IQ series, according to the order confirmation from November 2017 The machine was purchased in December 2016. It is worth noting the excellent condition and the low usage with only approx. 500 operating hours. Blodpfjz D Htgox Ahmen Price: net 14,500 EUR Location: 09627 Bobritzsch-Hilbersdorf Availability: immediately If you are interested, we look forward to receiving your inquiry.

Condition: like new (used), Year of construction: 2017, S&F Oscillating Screen | Screening Machine Type ASM-200 used (inspected) with inspected bearings (flange bearings) and inspected universal joints Manufacturer: S&F GmbH Type: ASM-200 Bljdpfoy Aa Ugjx Ahmon Year of manufacture: 2017 Screening capacity: approx. 20 t/h (for wood pellets, depending on material) Fractions: 2 Screening area: 2.0 m² per screen mesh size Screening decks: 1 piece Mesh size of the screen: - 1. screening deck: punched perforated plate screen, D = 5 mm Drive power: 2.2 kW, 3 x 400 V, 50 Hz L x W x H: 3,200 x 1,800 x 1,450 mm Model: ECO Line Machine weight: approx. 1,300 kg Machine colour: RAL 3000 Flame Red incl. 1 piece Modular silo type M-300 / 45°, used L x W = 3,000 x 3,000 mm Total height: approx. 4,400 mm Outlet height: approx. 1,750 mm Volume: approx. 4.06 or 9.35 m³ Max. bulk density: approx. 900 kg/m³ Item no.: 406.4345 Incl. extension feet L = 1,100 mm Incl. hopper attachment and slide gate Suitable for screening the following bulk materials, among others: - Wood chips - Sawdust and sawdust - biomass - Wood pellets - charcoal - Waste wood - Bark Wood chip screen | Vibrating screen | Flat screen | Oscillating screen | Screening machine for wood chips

Year of construction: 2013, operating hours: 3,500 h, condition: used, functionality: fully functional, machine/vehicle number: 12400, TSM/tsi oscillating sieve machines are used for the classification, screening, and dust removal of bulk materials from almost all industrial sectors, such as stones and soils, chemicals, mining, pharmaceuticals, feed, and food. The machine for sale has a diameter of 1200 mm and is equipped with 3 sieve decks with mesh sizes of 3 mm, 1.4 mm, and 0.463 mm. In addition, spare sieves with the following dimensions are included: • 16 mm x 1 piece • 15 mm x 1 piece • 0.5 mm x 1 piece • 0.16 mm x 1 piece • 0.9 mm x 1 piece • 0.86 mm x 1 piece The drive has a power of 1.5 kW, 400 VAC, 50 Hz, 1450 RPM. The machine was in operation at an R&D center in Israel. As the company now operates a production facility in Europe, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in Europe. Bljdpfozmzbmex Ahmsn The details for optimal transport need to be clarified. The machine price does not include packaging on a pallet.

Year of construction: 2019, operating hours: 3,000 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 10031325, This is a high-resolution NIR system capable of detecting particles in the 3 mm size range. Additionally, the machine is equipped with an electromagnetic detector that has a sensitivity of approximately 1.5 to 1 mm, depending on the metal type. Depending on the settings, it can sort positively or negatively. Technical data: Belt width: 1024 mm Nozzle bar: 6.4 mm working width Blsdpozl Uzwefx Ahmsn Upon request, complete documentation can be provided. The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in Europe, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in Europe. The details for optimal transport need to be clarified. The machine price does not include packaging on a pallet.

Condition: excellent (used), Year of construction: 2016, usable tank capacity: 18,000 l, total width: 2,200 mm, total height: 4,500 mm, For Sale: Sourdough preparation and storage set 3x IsernHäger Cooled and insulated stainless steel mixing/storage tank + 1x Diosna Isernhager preparation tank 3x PABST MF6000 stainless steel mixing tank - 6,000 l (2016) - Insulated (IsernHäger) Technical specifications: Brand: PABST Type: MF6000 Year of manufacture: 2016 Capacity: 6,000 liters Material: Stainless steel Insulation: Yes, fully insulated Manhole: Yes, equipped with an inspection hatch Total height: approx. 4,500 mm (4.5 meters) Tank height (without frame): approx. 2,800 mm Total width/diameter: approx. 2,200 mm Net weight: 1,650 kg Mixing system: Yes, equipped with a built-in agitator Agitator power: 7.5 kW Description: High-quality PABST MF6000 vertical stainless steel storage and mixing tank for sale. These high-quality industrial tanks from 2016 have a capacity of 6,000 liters each and are ideally suited for the food industry, including large-scale bakeries, for the storage and processing of liquid ingredients or dough products. Equipped with a powerful, integrated agitator (7.5 kW) mounted on the top, the tank ensures very efficient mixing and homogenization. The tank is fully insulated to maintain a constant product temperature during processing or storage. Key features: High-quality construction: Made of high-quality stainless steel for maximum hygiene and durability. Powerful agitator: Integrated 7.5 kW motor effortlessly handles fluids with varying viscosities. Full insulation: Excellent temperature control for sensitive ingredients. Easy to maintain: Equipped with an inspection hatch (manhole) on the top for easy access and cleaning. Safe design: Robust vertical construction on heavy-duty legs. 1x IsernHäger Diosna storage tank 1000 syst Brand: IsernHäger Load cells: Yes Manhole: Yes Own weight: 410 kg Stainless steel: Yes Total dimension Height: 2000 mm Year of manufacture: 2016 Type: 1000 syst Agitator power: 5.2 kW Tank diameter: 1300 mm Tank height: 1150 mm It is possible to view these tanks at our location. If you have any questions or comments, please do not hesitate to contact us. Sincerely, Leo Holland Bsdpfx Ahozval Aomsln

Year of construction: 2011, condition: good (used), functionality: fully functional, machine/vehicle number: K 0122, Equipment: CE marking, For sale: industrial machine K. Schulten KS AluKap 350-3, designed for the production of roller shutters with armored slats. The machine has been in use for 10 years. Bodpszxcn Ejfx Ahmjln Technical data: - Manufacturer: K. Schulten GmbH & Co. KG – Germany - Model: KS AluKap 350-3 - Year of manufacture: 2011 - Machine number: K 0122 - Maximum slat width: 3500 mm - Minimum slat width: 500 mm - Power supply: 400 V / 50 Hz / 2.5 kW - Air consumption: approx. 250 l/min - Pneumatic system pressure: 8 bar - Weight: approx. 900 kg - CE marking Condition: used, operational. Reason for sale: replacement with a newer model. The machine will be available for collection in approximately 3 weeks. You are welcome to visit and see the machine in operation. Price: 20,000 EUR net.

Year of construction: 2017, operating hours: 2,000 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 51.I613-020-01, The IFE SORT is a density sorting machine based on the fluidized bed system for fine, dry bulk materials. The function of this air separation table is based on a combination of vibration and air technology. Heavy components are conveyed upwards by vibration, while lighter components are kept suspended by injected air and consequently float downwards. The applications include recycling and secondary raw material processing, as well as the wood, food, and mining industries. Standard version: consists of a basic unit with a perforated plate insert driven by two unbalanced motors and a fan with a motor. Nominal width: 600 mm; sieve aperture 0.6 mm Capacity: up to 3 tons/hour in recycling – however, this is highly dependent on the density and size of the material being processed. Easy adjustment: of impact angle, amplitude, inclination, speeds, etc. Design: dust-tight Control cabinet: is not included; 2 x 500 W unbalanced motors and 1 x 4 kW fan The machine was in operation at an R&D center in Israel. As the company now operates a production facility in the Netherlands, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered ex works at a port or at the production facility in the Netherlands. Bljdpfx Aozkup Eohmon The details for optimal transport need to be clarified. The machine price does not include packaging on a pallet.

Year of construction: 2017, operating hours: 2,000 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 51N292010-01, The IFE SORT is a density sorting machine based on the fluidized bed system for fine, dry bulk materials. The function of this air separation table is based on a combination of vibration and air technology. Heavy components are conveyed upwards by vibration, while lighter components are suspended by injected air and consequently float downwards. The application areas include recycling and secondary raw material processing, as well as the wood, food, and mining industries. Standard version: consists of a basic unit with a perforated plate insert driven by two eccentric motors and a fan with a motor. Nominal width: 1000 mm Capacity: up to 3 tons/hour in recycling – however, this is highly dependent on the density and size of the material being processed. Easy adjustment: of impact angle, oscillation amplitude, inclination, speeds, etc. Design: dust-proof Control cabinet: in an IP 55 housing with a frequency converter for motors and fan, included as standard. Bedpfx Aozkvaxjhmjln The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in the Netherlands, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production plant in the Netherlands. The details for optimal transport need to be clarified. The machine price does not include packaging on a pallet.

Year of construction: 2017, condition: like new (used), machine/vehicle number: 81100543, The machine is ready for operation and has only been in use for 3 years since its purchase. The device was installed in a production line for soups in 220 ml to 360 ml packages. Production series: SC-3000-XXX Scanning width: 320 mm Optical resolution: 1 pixel = 0.16 mm Rated voltage: L1/N/PE 230V AC Rated frequency: 50 Hz (+/-2%) 1.6 kVA Connected load: 16 A Protection class: IP65 Lamp type: MXR-160HP/20 Operating temperature range: 5°C - 40°C Machine weight: 420 kg Bledpfjzrh D Sex Ahmjn Length: 1750 mm Depth: 720 mm Height: 2290 mm EU Declaration of Conformity Option to start the machine on-site.

Condition: used, Year of construction: 2015, Technical details: x-travel: 600 mm y-travel: 400 mm z-travel: 500 mm Bedpfxozzyg De Ahmeln control: Mitsubishi M70 table-size: 2 × 700 × 400 mm mm table load capacity: 2 × 250 kg kg tool taper: SK40 / ISO40 Revolution per minute: 12.000 U/min. tool changer with: 24 Plätze (+1 Werkzeugwechselposition) total power requirement: 25 kW Weight approx.: 6,6 t dimension machine approx.LxWxH: 3,7 × 2,60 × 2,78 m The Müga S6040 is a modern vertical CNC machining center designed for the precise complete machining of workpieces in single-part, small-batch, and series production. The machine is equipped with a high-performance main spindle with speeds of up to 12,000 rpm, a Mitsubishi M70 CNC control system, and an integrated twin pallet changer (worktable changer) for highly efficient and productive machining. Its rigid machine structure and precision linear guideways make the Müga S6040 ideally suited for demanding milling, drilling, tapping, and machining operations in toolmaking, mechanical engineering, mold making, and general metalworking. 4-axis CNC machining center with pallet changing system – 2 workstations (A/B), each equipped with its own CNC-controlled 4th axis and chuck. *

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: NS-009-0000-300, type of input current: AC, nominal power at 50% duty cycle: 250 kVA, throat depth: 300 mm, short-circuit current: 50,000 A, input voltage: 400 V, type of cooling: water, total width: 1,000 mm, total length: 1,000 mm, total height: 1,850 mm, overall weight: 1,000 kg, open-circuit voltage: 22 V, Zens Multifunction Resistance Welding Machine 250 kVA MF – 23 kN – 50 kA – Year of Manufacture 2013 For sale is a high-quality Zens multifunction resistance welding machine in a robust industrial design. The system was developed for demanding resistance welding processes and is ideally suited for series production in the automotive, supplier, electrical, and metal industries. The machine operates with modern medium frequency (MF) technology and achieves a welding power of 250 kVA at a 50% duty cycle. The powerful SER medium frequency inverter (700 A) enables a maximum welding current of 50 kA and ensures maximum process stability as well as reproducible welding results. With a maximum welding force of 23 kN and an overhang of 300 mm, the system is suitable for a wide range of resistance welding applications. Technical Data Bsdpfjzqucfox Ahmeln Manufacturer: Zens Machine Type: Multifunction Resistance Welding Machine Year of Manufacture: 2013 Welding Power: 250 kVA (Medium Frequency / MF) at 50% duty cycle Max. Welding Current: 50 kA SER Medium Frequency Inverter: 700 A Welding Control: SER-Mega1 Maximum Welding Force: 23 kN Overhang: 300 mm Equipment CE-compliant protective enclosure CE safety light curtain Welding table for welding forces up to 23 kN Pressure compensation tool QSF-M quality assurance system Position measuring system for process monitoring PLC control (Siemens S7) Robust industrial design for continuous industrial operation The combination of powerful medium frequency technology, precise force and position control, and modern PLC and SER welding control ensures high process reliability and consistently reproducible welding results. Thanks to the complete CE safety equipment, the machine can be easily integrated into existing production lines. The system is in good condition and can be inspected and demonstrated at any time by prior appointment.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 531 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations Bedpfxjz Agv Uo Ahmjln - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 532 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. Bsdpfoz Agw Ejx Ahmjln - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 533 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible Blsdpjz Ag Rrofx Ahmen - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Condition: repair required (used), Year of construction: 2010, operating hours: 7,700 h, functionality: not functional, machine/vehicle number: 15158-10, working range: 4,000 mm, sheet thickness (max.): 12 mm, sheet thickness steel (max.): 12 mm, CNC plasma cutting system BACH ThermoCut 2000 with pipe cutting device, TEKA dust extraction system, and plasma source. Manufacturer: BACH Maschinenfabrik GmbH Type: ThermoCut 2000 Year of construction: 2010 For sale is a used CNC plasma cutting system BACH ThermoCut 2000, including pipe cutting device, plasma source, dust extraction system, and complete piping. The system was used in our machine manufacturing company until recently and is suitable for cutting sheet metal as well as processing pipes. Technical data: Working area: 4,000 x 2,000 mm Plasma source: Thermal Dynamics Ultra-Cut 100 CNC control: myBach Pipe cutting device included Pipe diameter: min. 50 mm max. 320 mm Max. cutting thickness: Mild steel: up to 12 mm Stainless steel: up to 10 mm TEKA filter and dust extraction system included Complete dust extraction piping system included CE marking available Maintenance and condition The system was regularly maintained during its entire service life. Official maintenance by the manufacturer was last performed on August 20, 2013. After that, ongoing maintenance was carried out in-house. Filters of the TEKA dust extraction system were renewed approximately 6 months ago. Cutting torch head was renewed approximately 4 years ago. Cooling water filter is changed regularly, approximately once a year. The operating hour counter of the dust extraction system currently shows approximately 7,700 hours. Since the system was operated exclusively with the dust extraction system running, this value can be used as a good indication of the total operating time of the system. Known defect The system is currently not operational. After consultation with Voortman and Mr. Sobiech from Magma Industries, the cause is likely to be in the cooling circuit of the plasma source. According to the experts, the most likely causes of the fault are: Defective cooling water pump Defective flow sensor Leakage on the suction side of the cooling water system A final fault diagnosis has not yet been carried out. Spare parts for the installed Thermal-Dynamics plasma source are now only available to a limited extent. The machine is therefore explicitly sold as a system requiring repair or for refurbishment. Scope of delivery BACH ThermoCut 2000 CNC system Thermal Dynamics Ultra-Cut 100 plasma source Pipe cutting device TEKA filter and dust extraction system Bedpfjzizkyjx Ahmjln Control panel with controller Dust extraction piping Accessories according to existing equipment Special features ✅ Pipe cutting up to Ø 320 mm ✅ Complete package including dust extraction ✅ Solid industrial machine made in Germany ✅ Easy-to-disassemble gantry design ✅ Also interesting for buyers who already have a suitable plasma source Location 24161 Altenholz, Germany Price Negotiable €21,900 Inspection possible by appointment. Sale exclusively to commercial businesses, excluding any warranty for defects. Loading / Dismantling The system is offered exclusively for self-dismantling and self-collection. The buyer assumes full responsibility for the dismantling, loading, and removal of the machine at their own cost and risk. To assist with loading, a hall crane with a maximum lifting capacity of 10 tons is available on site. Use of the crane can be arranged in advance. Due to the size and weight of the system, we recommend an inspection before submitting an offer.

Year of construction: 2021, operating hours: 300 h, condition: used, functionality: fully functional, machine/vehicle number: I100, Florapower industrial continuous screw-press processing system, manufactured in Germany and commissioned in October 2021. The machine has accumulated less than 300 total operating hours and is in very good, fully operational condition. The system was originally configured for the continuous, solvent-free mechanical processing of dried hemp flowers and the production of hemp/CBD oil. In addition to hemp processing, the Florapower screw-press technology can also be used for the mechanical processing and cold pressing of a broad range of dry oil-bearing seeds and other suitable raw materials. Exact capacity and process parameters depend on the raw material, screw configuration and required final product. The system features: automated raw-material feeding and dosing industrial continuous screw-press technology PLC / touchscreen process control adjustable operating parameters stainless-steel process components continuous mechanical pressing solvent-free processing concept Bodjzz Nvzjpfx Ahmeln Manufacturer: Florapower GmbH, Germany Year: 2021 Commissioned: October 2021 Operating hours: less than 300 h Condition: very good / fully operational Original machine purchase price: approx. EUR 96,000 excluding installation and transport Total original investment: approx. EUR 110,000 Location: Slovenia, European Union Asking price: EUR 85,000 – negotiable The machine can be inspected and demonstrated under operating conditions by appointment. Detailed photographs, operating videos and additional technical documentation are available for serious buyers. Dismantling, loading and international transport can be agreed separately with the buyer. Reason for sale: change of production focus.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 530 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. Blsdpfx Aezz Rpcehmjn - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2002, condition: good (used), functionality: fully functional, machine/vehicle number: 023116, Wenzel RS 1012 CNC 3D Coordinate Measuring Machine The Wenzel RS 1012 is a CNC 3D coordinate measuring machine (CMM) with a horizontal-arm design, engineered for the precise measurement of medium-sized to large workpieces, such as components and assemblies. The machine design is based on a stable cast iron or granite base plate serving as the measuring table, with a side-mounted guide system that allows for open loading from three sides. Key Technical Components & Specifications Machine Type: Horizontal-arm 3D coordinate measuring machine (CMM) Manufacturer: WENZEL Präzision GmbH Model / Year of Manufacture: RS 1012 / 2002 Serial Number: 023116 Measuring Volume (X/Y/Z): 2,000 mm × 1,000 mm × 1,200 mm Probing system: Renishaw PHC10-3 PLUS (interface/control for PH10 motorized rotary-tilting head) Design: Horizontal-arm measuring machine (column-type CMM) with integrated base plate Measuring accuracy (MPE): 15.0 μm+ (L / 45.0 mm total maximum longitudinal measurement error in the measuring range is approximately 50.0 micrometers) Sensor system (standard configuration): Delivered without a PC Key Features of the RS Series High Flexibility: The machine generally does not require a special foundation and can be flexibly integrated into existing production and laboratory spaces. Barrier-Free Accessibility: Thanks to the horizontal arm’s lateral guidance, the measuring table is freely accessible, which facilitates the loading of heavy workpieces using a crane or forklift. Multi-sensor technology: In addition to tactile sensing systems (such as the TP20), the series can often be equipped by the manufacturer with optical line lasers or scanning sensors. “Everything from a single source: We’d be happy to offer you suitable bank financing for your project.” komplett-konzept.leasingo.de Bljdpjzz Hywsfx Ahmsn

Condition: excellent (used), Year of construction: 2024, operating hours: 500 h, functionality: fully functional, machine/vehicle number: 4803, type of input current: AC, overall weight: 2,200 kg, total width: 2,600 mm, total length: 2,600 mm, total height: 2,300 mm, input voltage: 400 V, power: 5.5 kW (7.48 HP), input frequency: 50 Hz, A nearly new GKM KTS 2600 DS with less than 500 operating hours. This is a tumbling screen machine with a patented adjustment for the three-dimensional movement, allowing the dwell time for each product on the screens to be individually adjusted. The main shaft is driven by an electric motor and V-belt. Technical data: Bsdpfjzl U Uwox Ahmsln • Tumbling screen machine with a 2600 mm diameter and 5 screen decks • Inlet DN 300, outlet DN 300, stainless steel • Screen lifter for easy removal • Approximately 4000 silicon balls for screen cleaning for difficult materials • Motor 5.5 kW, 400 VAC, 50 Hz • ATEX EXII-/3D Ex h IIIB T155°C design – Zone 20 inside, Zone 22 outside • Outlets are individually adjustable and adaptable • Installed screen sizes: 2 mm, 1 mm, 0.56 mm, 0.4 mm, 0.32 mm • Spare screens: 0.63 mm, 0.71 mm, 1.5 mm The machine was in operation at an R&D center in Israel. As the company now operates a production facility in Europe, the R&D center will be closed. The machines will be transported to Europe at the owner’s expense and can be delivered EXW at a port or at the production facility in Europe. The details for optimal transport need to be clarified. The machine price is without packaging on a pallet.

Condition: new, Year of construction: 2026, functionality: fully functional, spindle speed (min.): 12,000 rpm, spindle speed (max.): 36,000 rpm, High part output | 3D CNC milling for small workpieces up to 1000 x 800 x 400 mm. > Efficient milling spindle, short throughput times and high part output: Due to the highly efficient milling spindle, the 5-axis CNC machine creates a high part output. The CNC milling machine stands for absolutely fast production processes and short throughput times. In addition, the rotary table of the CNC milling machine performs the C-axis movement, making milling even more effective. > Little space required, fast commissioning: The RT-F 1400 CNC milling machine requires little space and can be commissioned within two days. Set-up times are minimal. The CNC machine can be easily moved to another location using a forklift. > First-class contour accuracy for 3D machining with fixtures: All components, such as milling tool, spindle and the machine are matched to each other and to the desired component. A fixture from HG GRIMME SysTech can additionally influence the milling quality. Existing fixtures can be reused at any time. > Use in industry and small businesses: The CNC rotary table milling machine RT-F 1400 is particularly suitable for 3D machining of smaller components (800x1000x400mm). The CNC milling machine is used just as successfully by large industrial companies, such as the automotive industry, as it is in small businesses. > Basic version of the CNC machining center - Protective cabin with automatic gate unit, pneumatic - Swiveling, integrated control panel - High-performance CNC control NUM Flexium+ with nPad and 19'' monitor - Tool changing system with 12 places, dust-tight - Tool measurement Renishaw-TS 27 R - chip tray, vacuum pump > 365 further equipment options - example CFK package The machine can be equipped with many further options. One example is the upgrade of the machine equipment for CFRP machining. The CFRP package takes into account many safety aspects that are necessary for the processing of composite material. We offer around 365 additional options across our entire product range and can further equip the basic machine offered at any time. > Suitable materials for the 5-axis CNC rotary table milling machine 1400: plastics, composites such as CFRP, model making materials, aluminum. Further technical data Cube dimensions component - 1000 x 800 x 400 mm (+162 mm substructure) Travels X/Y and Z - X/Y and Z: 1,040 x 1,400 mm x 725 mm Travels of rotary axes A and C - Rotary axis C (table) ± 1,080°. - Swivel axis A, standard tool spindle with tool changing system ± 110°. Speeds - Rapid traverse linear axes X/Y/Z 40/40/30 m/min - Rapid traverse rotary axes A/C 14,000°/18,000° m/min Accuracies - Positioning accuracy ± 0.040 mm - Repeat accuracy ± 0.035 mm Machine rotary table - ø 800 mm Table load - approx. 200 kg Milling spindle - High-frequency milling spindle 9 kW (S6) - High frequency milling spindle 8 kW (S1) - speed 36.000 rpm - Tool holder HSK 40 E Machine weight - approx. 3000 kg Already included special equipment - Head suction for floating dust and chips - Interior with perforated footboards Bljdpfox S Etmex Ahmon - interior lighting - Ethernet and remote maintenance - 3D spline - Connection T-Box (nPad) (subject to change without notice)

Condition: new, Year of construction: 2025, functionality: fully functional, This UV DTF printer, a digital flatbed printer, replaces conventional laser printers and enables color printing on glass, wood, textiles, plastics, metals, and many other materials. Easy to peel and apply to various surfaces! New model: UV4060DTF Print head: Epson TX800 2690 dpi max. Includes software for the printer and image editing. Dimensions: 800*858*566mm Weight: 70kg A3 size 31x55cm and 23cm height are possible. Blodpfxeg Icd So Ahmsn 5 x 500ml of ink can be supplied (additional cost). Software setup and printer explanation are available upon request, throughout Germany/Europe (additional cost). Demo videos, etc., can be sent via email/WhatsApp.

Year of construction: 1992, condition: used, functionality: fully functional, machine/vehicle number: 029.700, Painting/drying booth from Luft- und Trockentechnik GmbH, type KSP 6-BT, manufactured in 1992. The system is suitable for painting and drying workpieces and features an integrated exhaust/extraction system. Technical data: Manufacturer: Luft- und Trockentechnik GmbH Type: KSP 6-BT Year of manufacture: 1992 Manufacturer's number: 029.700 Usable volume: approx. 72 m³ Total volume: approx. 81 m³ Minimum exhaust air volume flow: 1,440 m³/h Maximum permissible oven temperature: 90 °C Maximum solvent quantity: 4,302 g/oven load The painting booth has dimensions of 6 x 4 meters. The system includes an exhaust duct with extraction via the roof. In addition, a suspension/transport system is located in the ceiling area, to which workpieces or painting racks can be attached and moved through the work area. Bodoz D Evyepfx Ahmsln Dismantling will be carried out by the buyer.

Condition: used, Year of construction: 2022, operating hours: 10 h, functionality: fully functional, machine/vehicle number: NS-009-50Hz-11kN-300, type of input current: AC, nominal power at 50% duty cycle: 160 kVA, throat depth: 300 mm, short-circuit current: 25,000 A, input voltage: 400 V, type of cooling: water, total width: 1,000 mm, total length: 1,000 mm, total height: 1,850 mm, overall weight: 1,000 kg, open-circuit voltage: 15 V, Zens Multifunction Spot Welding Machine 160 kVA – 50 Hz – 11 kN – Year of Manufacture 2022 For sale is a Zens multifunction spot welding machine in a robust industrial design. The machine is designed as a 50 Hz alternating current system and is suitable for various spot welding applications. The machine features an integrated seam welding adapter. The corresponding seam welding heads are not included in the scope of delivery and can be purchased separately. Thanks to the modular design of the machine, it is possible to use different welding tools and applications. Technical Data Manufacturer: Zens Model: NS-009 Machine Designation: Multifunction Spot Welding Machine Year of Manufacture: 2022 Welding Technology: Alternating Current (AC), 50 Hz Welding Power: 160 kVA Duty Cycle: 50% Max. Welding Force: 11 kN Welding Control: SER PLC Control: Siemens CE Safety: 2-Hand Control Seam Welding Adapter: Integrated Equipment Zens Multifunction Spot Welding Machine 50 Hz Alternating Current Technology Integrated Seam Welding Adapter Bledpfjztn Sxex Ahmsn SER Welding Control Siemens PLC Control Device Carrier System with Touchscreen 2-Hand Control as CE Safety Device Modular Machine Design Robust Industrial Design Available Separately The seam welding heads are not included in the machine's selling price and can be purchased separately. The "On Top" water cooling unit is also not included in the machine's selling price and can be purchased separately. The machine is in good condition and can be inspected and demonstrated by appointment. Note: Seam welding heads and the "On Top" water cooling unit are available separately and are not part of the machine offer. Subject to technical changes and errors.