Used The Bag Opening Silo for sale (15,150)

Year of construction: 2025, condition: new, The Bag Opening Silo is a compact and flexible solution designed for efficient emptying of small and big bags containing cement, lime, and other powdered materials. Big bags can be safely and easily unloaded using a forklift or other lifting equipment, ensuring a clean, safe, and controlled material transfer process. This system represents a practical solution for construction sites and production locations where bulk cement delivery by tanker is not possible, enabling continuous use of bagged materials. In addition to material emptying and dosing, the system can also be used as a temporary or permanent intermediate storage solution, providing full protection of the material from moisture, dust, and other external influences. The system can be easily connected to existing mobile and stationary concrete batching and mixing plants, allowing fast integration into the existing production process. Upon customer request, the system can be equipped with load cells for precise material weighing and control. The discharge capacity is 15 m³/h. Thanks to its compact construction, easy handling, and high functionality, the Bag Opening Silo represents a reliable and practical solution for handling powdered materials at various construction sites and production facilities. Kodpfxjzcwrhj Ai Rjdr Available models: - BS 02 - Capacity: 2 m³ - BS 04 - Capacity: 4 m³ - BS 06 - Capacity: 6 m³

Condition: used, Technical data feed hopper with hydraulic moving floor and bag opener for recyclables from yellow bags and residual waste: Manufacturer BRT HARTNER GmbH Type HP5-3035 Year of construction 2015 Hopper volume 30 m³ Drive line 17.5 kW Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Condition of the machine: The feed hopper with bag opener was used at a large recycling plant, where recyclable materials from yellow bags or commercial waste were tipped into the hopper using wheel loaders, the bags were opened using the bag opener, and the recyclable materials were transported to a sorting plant or the commercial waste was transported in measured quantities for further processing. The system functioned flawlessly until it was dismantled and replaced with a larger system with higher throughput capacity. The machine was dismantled into individual parts in our workshop, partially overhauled, reassembled, and tested during operation. The following overhaul work was carried out and the following spare parts were replaced: Kodpoy Urtfjfx Ai Rsdr Dismantling of the feed hopper and bag opener into individual parts. Cleaning, partial sandblasting, priming and painting of the steel parts. Various wear and cover plates were newly manufactured and installed. Cutting off the worn ends (approx. 40cm) of the push floor pipes. Welding on the new pipes and smoothing the push floor pipes. Replacement of all plastic sliding plates for the hydraulic push floor. Removal of the hydraulic unit from the push floor, emptying of the hydraulic oil tank, replacement of the oil filters, refilling with new hydraulic oil. Replacement of the three hydraulic blocks, all valves, the oil sight glass and all hydraulic hoses from the hydraulic unit. The seal kit and hydraulic hoses were replaced on all three hydraulic cylinders of the push floor. All six limit switches (proximity sensors) on the push floor were replaced. The conveyor chains on the left and right of the scraper conveyor were replaced. Seven carrier bars on the scraper conveyor were replaced. The drive motor for the ripper blades was replaced. All nine pneumatic cylinders for the pressure pipes were replaced. All pneumatic lines and connections were replaced. All of the plastic sliding plates for the hydraulic operation of the bag opener were replaced. The bag opener can be moved vertically so that the system can also be used for commercial waste or residual waste without the bag opener. The side impact protection plates on both sides were replaced. Various wear parts of the bag opener have been replaced. The entire system has been rewired and reconnected. The system control in the control cabinet has been retrofitted by the manufacturer BRT Hartner to a self-sufficient individual control system and the standard programme has been reloaded into the control system. The system has been commissioned and tested by the manufacturer BRT Hartner, see the function video. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: excellent (used), Year of construction: 2019, The machine is in very good condition – the latest model is designed for poultry slaughter and initial processing, ensuring a capacity of 13,500 birds per hour. Technical Specification Model: 20x6" Capacity: 13,500 birds/hour Live weight: 1.2-4.0 kg Number of units: 20 Shackle pitch: 6" Ijbtt Shev Avvuedfjar Length (X): 2508 mm Height (Y): 2985 mm Width (Z1): 1693 mm Kdsdpfewdidmex Ai Rsr Width (Z2): 3092 mm Width (Z3): 2580 mm Weight: 1535 kg Water consumption: 1.0 m³/h Water connection: High pressure: 40 bar; Medium pressure: 8 bar; Low pressure: 2-3 bar Water inlet: 3/8" BSP Drain connection: DN100 BSP

Year of construction: 2020, condition: like new (used), functionality: fully functional, machine/vehicle number: 7523/OC6199, Equipment: CE marking, Complete cement dosing silo with cement screw conveyor and control panel. The unit has operated for 10 hours. Hour counter on the control panel. Technical manual available. Kdedpfx Aieyrywlo Ror

Condition: new, Bag opener, for opening bags containing recyclable materials such as "yellow bags," etc. Can be used as a stand-alone unit or as a component in a system, e.g., a sorting system. Throughput: 6-7 tons/hour Drive power: approx. 18 kW Dimensions: 8000 x 2350 x 2700 mm Weight: 11 tons Kdodpfsdxwlzox Ai Rjr Made to order Delivery time: approx. 30 weeks Further data and quotation upon request.

Condition: new, Year of construction: 2026, BULK PRODUCTS BAGGING LINE PUDAS-50NB is designed for automated packaging of bulk products (type of peat, turf, pellets, sand or simillar) by weight • The process is managed via color Touch-screen, multilingual Menu. • Suites for dosing into bags from 5 to 50 kg. • Capacity arround 3000 kg/hour. (depending on the product charactersitics and the size of the bags) operated by one person Kodpfx Aei El Hrsi Rsdr • Power supply 1ph., 230V, 3.2kW • Dimensions: L6.6m x W2.5m x H2.0m Made in Lithuania. CE certified.

Condition: good (used), Year of construction: 2013, Saxon Bag Sealer Model SR1000 Adjustable temperature control Digital display Adjustable mast height Year 2013 Stainless steel Kdsdpfxsp At T Ie Ai Rer Mobile on Castors Price € 5,950

Condition: used, axle configuration: 3 axles, first registration: 04/2011, loading space volume: 60 m³, suspension: air, tire size: 385/65R22,5, wheelbase: 1,300 mm, Year of construction: 2011, Tyre size: 385/65R22,5 Kdodewtdzxopfx Ai Rer Suspension: air suspension Drive: Wheel Empty weight: 6.120 kg Carrying capacity: 32.880 kg GVW: 39.000 kg Make of bodywork: SPITZER Number of compartments: 5

Condition: used, axle configuration: 3 axles, first registration: 09/2010, loading space volume: 60 m³, suspension: air, tire size: 385/65R22,5, wheelbase: 1,300 mm, Year of construction: 2010, Tyre size: 385/65R22,5 Suspension: air suspension Drive: Wheel Empty weight: 6.300 kg Carrying capacity: 32.700 kg GVW: 39.000 kg Kdsdpfx Aiswtf Tps Rsr Make of bodywork: SPITZER Number of compartments: 5

Condition: like new (used), Year of construction: 2023, operating hours: 600 h, functionality: fully functional, feed length X-axis: 1,500 mm, workpiece weight (max.): 100 kg, working width: 1,500 mm, total length: 6,000 mm, type of input current: three-phase, input voltage: 400 V, Equipment: cabin, Painting system with two separate pumps, allowing for the use of different liquids (e.g., gloss and matte paint). Kdodpfxozfy Upo Ai Rsr System manufactured in 2023. Selling due to a change in printing technology.

Condition: used, Year of construction: 2022, PRODUCT TYPES: • Four side seal pouches • Quad seal pouches • Side seal pouches • Transverse zipper pouches • Gusset pouches • Bottom stick hole pouches • Micro-perforated pouches • Handle hole pouches • Round corner pouches MATERIALS: • LDPE • CPP • MCPP • AL • Nylon • PP • Laminated film structures MAIN TECHNICAL INFORMATION: Material thickness: 60–250 μm Max. web width: 1300 mm Max. roll diameter: 800 mm Core diameter: 3” and 6” Max. pouch width, quad seal: 400 mm Max. pouch length: 1000 mm Eye mark accuracy: ±1 mm Machine speed: 15–65 pcs/min Material speed: 40 m/min Main power: 400V, 50Hz, 3 phase Installed power: 100 kW Machine weight: approx. 18,000 kg Machine size: 33,500 × 4,200 × 1,800 mm POUCH SIZE RANGE: Quad seal / side welded width: 180–400 mm Gusset depth: max. 80 mm Minimum gusset depth: 30 mm Bag length: 360–1000 mm UNWINDING SECTION: • Air shaft unwinding • Magnetic powder brake • Dancing roller tension control • Servo-driven unwind system PERFORATION SYSTEM: • Micro perforation unit • Wheel type perforation Kedpfx Aiszf Nk Tj Rodr • Additional perforation holes • Same type as existing machine configuration FOLDING SYSTEM: • Four side seal / quad bag folding wheel section SEALING AND COOLING SYSTEM: Mechanical press sealing system: Quad seal longitudinal sealing: 2 groups, 1010 mm Quad seal longitudinal cooling: 2 groups, 1010 mm Cross sealing station: 6 sets No. 1: K-seal No. 2: Gusset filling sealing No. 3: Cross seal, 740 mm length / 60 mm width No. 4: Cross seal, 740 mm length / 60 mm width No. 5: Cross seal, 740 mm length / 60 mm width No. 6: Cross cooling, 740 mm length / 60 mm width Additional 5 mm sealing section, upper and bottom PUNCHING SYSTEM: Tear slit / notch puncher 3-hole handle puncher Handle puncher: 20 × 80 mm, 3 sets Hole sizes: • 3 holes Ø20 mm • 20 × 80 mm • 24 × 77 mm Round corner puncher: 2 sets Puncher supports: 3 sets Bottom stick hole puncher: • 12 mm, 8 pcs • 16 mm, 8 pcs Vacuum system for punch waste removal DRIVE SYSTEM: Main motor: 3.5 kW Back draw roller servo: 3.5 kW Front draw roller servo: 3.5 kW Middle draw roller servo: 3.5 kW Longitudinal independent sealing servo: 5 kW × 2 Unwind servo motor: 1.5 kW × 1 / 3.5 kW × 1 Tension control servo: 3.5 kW × 1 Flying knife servo: 1.5 kW × 1 Manipulator sucker drive: 0.75 kW × 1 Finished product carrier counting drive: 0.75 kW × 1 CONTROL SYSTEM: • PLC control • 10” touch screen • Suitable for printed and unprinted bags • 16 temperature control zones • Individual temperature display • Temperature tolerance: ±2°C • High-sensitive eye mark sensor • Adjustable eye mark position STACKING SYSTEM: • Simple type stacking table • Static removal system • Automatic stop when machine stops • Alarm for bag output range: 25–100 bags • Step motor belt control • Belt width: 60 mm • Adjustable batch and belt length SAFETY SYSTEM: • Safety light curtain • Emergency pulling rope • Emergency buttons every 2 meters • Individual emergency control INCLUDED OPTION: ZIPPAK transversal zipper attachment Transversal zipper unwinder and rewinder Innolock / Velcro zipper capability Tooling for 3 zipper sizes: • 180–220 mm • 230–300 mm • 310 mm Micro-perforation holes Bottom stick hole puncher Trim rewinders Chiller

Condition: used, Year of construction: 2022, functionality: fully functional, film width: 300 mm, product width (max.): 300 mm, product length (min.): 100 mm, product width (min.): 80 mm, product length (max.): 500 mm, Equipment: documentation/manual, We offer this used PACKMAT Type S-300 bag sealing machine, manufactured in 2022. Plant No.: 750-0-0426 Year of manufacture: 09/2022 Bag packaging system for PE, PP, VCI, and Tyvek tube films up to 300 mm in width. It manufactures, prints, fills, and seals bags in a single process, with integrated thermal transfer printing. Kjdpfxjzquxge Ai Rsdr Features: ✓ Manufacturing, printing, filling, and sealing in a single process ✓ Siemens S7 PLC with touch panel, counter functions, maintenance, and setup menu ✓ Impulse sealing system with temperature control, over-temperature protection, heating wire breakage monitoring, and cutting knife ✓ Robust construction: aluminum profile frame, closed housing, integrated work table ✓ Complete technical documentation and CE declaration of conformity Performance data: 15 bags/minute at a bag length of 300 mm Bag width: 80–300 mm (PE / PP / VCI / Tyvek) Bag length: 100–500 mm, freely adjustable Direct printing: 305 dpi thermal transfer Integrated printer: Toshiba B-SX8T, thermal transfer, 305 dpi, printing width up to 213.3 mm, speed up to 203 mm/s Also included in the scope of delivery: Remaining stock of packaging material – approx. 46 rolls of tube bags and approx. 300 rolls of ribbon. Condition: The machine is in technically perfect working order and shows signs of wear and tear consistent with its age and use. With certain bag materials, occasional restrictions may occur when opening the bags, for which no guarantee is provided. Inspection is possible by prior arrangement. If you have any questions or require further information, please send us a message or call us.

Year of construction: 2021, condition: excellent (used), functionality: fully functional, Industrial automated COMATEC Solids Big Bag receiving, handling, opening and discharge station for dry bulk solids. The system was designed to reduce manual handling of the bags. The operator places the full Big Bag in the loading area and attaches its lifting loops to the lifting crossbeam. The subsequent lifting, travel and positioning operations are carried out automatically by programmable electric hoists. The installation incorporates a double gantry-type supporting structure equipped with two VICINAY electric wire-rope hoists, each with a lifting capacity of 1,600 kg. The hoists are fitted with electric travelling trolleys and numerically controlled positioning. Each hoist has a 3 kW lifting motor and a 0.55 kW travelling motor, with an approximate lifting speed range of 1.8 to 14.5 m/min. Once positioned above the receiving station, the Big Bag is opened from the bottom by means of a removable and replaceable knife system, allowing rapid product discharge. The material then passes through a COMATEC DRG-300 lump breaker, a K-900-DC circular vibrating screener and a 2,000-litre buffer hopper. From the hopper, the product is metered by means of a tubular screw feeder. The system was originally designed for handling PTA powder, with an apparent bulk density of approximately 0.9-1 kg/dm³. It may also be suitable for other dry powders or granular products, subject to verification of product compatibility, material construction, ATEX classification and the required filtration and discharge arrangements. Main components Kdsdpfozvc Duex Ai Rer • Double gantry structure for Big Bag handling. • Two VICINAY 1.6 t electric hoists. • Electrically driven travelling trolleys. • Programmable automatic positioning. • Big Bag lifting crossbeams. • Removable knife system for rapid bag opening. • COMATEC DRG-300 lump breaker. • K-900-DC circular vibrating screener. • 2,000-litre buffer hopper. • Tubular screw feeder. • Maintenance platform with open-grid flooring and safety railings. • Level instrumentation. • Associated pneumatic and electrical components. • Carbon-steel support structure.

Condition: good (used), OK Supersealer Continuous Bag Sealer Fully stainless steel Complete with stainless steel belt conveyor Adjustable temperature control Stop start controls, E stop Height adjustable sealing head Mobile on castors and lockable feet Kdsdpfjzbnnksx Ai Ror The best bag sealer on the market Price € 9,500

Year of construction: 1979, condition: good (used), 1 x 90 m³ aluminum silo with extended base and filter housing, ø 3,000 mm designed for a specific weight of 0.6 kg/dm³ (formerly used as a flour and starch silo) Manufacturer: Zeppelin Capacity: approx. 90,000 liters Diameter: approx. 3,000 mm Overall height: approx. 15,950 mm + 1,200 mm railing Weight: approx. 4,000 kg Specific weight: 0.6 kg/dm³ Material: Aluminum: AlMg3 Food grade: yes Insulation: approx. 100 mm mineral wool with screwed-on cover plate (cover plate partially damaged, but can be repaired by us). Connections and fittings: On the top: 1 x roof edge railing (ø 1,800 x 1,200 mm) with two access openings 1 x hinged dome with protective grid DN 600 1 x access ladder to the filter housing 2 x crane eyes In the filter housing: 1 x flange DN 100 for filling line 4 x ventilation opening DN 600 with filter bag Kdodpfx Ajgig D Dei Rsr 3 x connection for control/measuring technology In the shell: 1 x ventilation grid (filter housing) 1 x filling line 1 x access door (approx. 1,850 x 800 mm) The silo ends in a 60° cone NW 1500 with a manhole. The cone is equipped with a fluidized bed (compressed air) and a rotary valve. The silo does not have rupture discs or explosion protection devices. For further information: see technical drawing and images.

Year of construction: 2021, condition: ready for operation (used), A silo system consisting of 3 storage silos, 1 weighing silo and conveying units is available. Material: PE/PP/PS/ABS/LDPE/HDPE/MDPE, storage silo volume: 32.6m³, weighing silo volume: 13.8m³. Storage silo capacity at 0.2t/m³: 6500kg, weighing silo capacity at 0.2t/m³: 2800kg. Storage silo dimensions X/Y/Z: 4200mm/4200mm/4200mm, weighing silo dimensions X/Y/Z: 3000mm/3000mm/3400mm, control: Siemens S7. Including steel frames, gate valves, full and demand indicators, filter bags, filling line, conveying and dosing system, rotary valves and gate valves. Documentation available. On-site inspection is possible. Ksdpfx Asv Ip Stsi Rsdr

Condition: excellent (used), The VAC-7HS abrasive recovery system is an electrically powered vacuum abrasive recovery system specifically designed for use with mineral abrasives, which typically generate more dust. The VAC-7HS abrasive recovery system is equipped with a particularly powerful side-channel blower, an integrated, high-performance cartridge filter with pulse-jet cleaning, a separate dust pre-separator SC-500 with manual emptying, and a 0.3 m3 open-air filter. It also includes a stationary storage silo for manual refilling of the blasting pot (manual shut-off valve), a bottom hopper, and suction hoses. The VAC-7HS abrasive recovery system can be used universally for recycling for further reuse or for a big bag filling station for the disposal of the mineral abrasive. Kdedpfx Aiezarybj Rsr

Year of construction: 2022, condition: good (used), functionality: fully functional, REF: MM6470 Volumetric filling and sealing system for pre-made pouches (doypacks). Rotary Volumetric Filler mounted on stainless-steel frame with 1 x Pre-made pouch (doypack) filling and sealing machine. Manufacturer - Qinyao/Top Y Machinery. Date of manufacture - 2022. Setup of volumetric filling system: Stainless-steel large infeed hopper over Rotary volumetric cup filler (freestanding) with nylon volumetric cups. Setup of pre-made pouch fill and seal machine: Twin-lane bag magazine (lanes 1# and 2#), vacuum pick-up and bag opening (1#Sucking, 2#Sucking, Pick Up Bag, Open Bag), front and back sealing jaws with sponge-faced grippers, Siemens Smart Line HMI, Omron controllers for front jaw, back jaw and printer, thermal transfer ribbon coder and discharge chute. Speed – variable up to 20 packs / minute, depending on fill volume. Pack size range – can handle doypacks up to 300mm long x 250mm wide. Controls – Siemens Smart Line HMI touch-screen control with easy-to-use programme settings. Tooling – 1 x Set of volumetric cups, previously used to pack whey protein products (1000g volume), dried fruit (200g volume) and other dry ingredients (depends depending on product). Supplied with a fill head attachment for plastic scoops as the material is deposited. Electrical requirements - 3 phase. Requires compressed air supply. Condition – Very good, likely has a total use of one year production. Kedpfx Aszp E T Soi Redr *Please note* - the pre-made pouch (doypack) filler and sealer has previously been used / fed by a linear weigher and a multi-head weigher depending on what the products being packed were.

Condition: new, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FABO produce Cement Silos from 50 to 2000 tons for stocking various tonnages of cement. Silos can be produced as welded or bolted according to your preference. For the continuation of production in a seamless way, FABO provide required units to get more than basic Cement Silo; level gauge, pressure relief valve and these kind of equipment. Kdjdpfx Aijv Uxaao Rsr CEMENT SILO: Capacity: 50-2000 TONS (BOLTED) Silo Filters: 24,5 m2 surface area (WAM Brand) Silo Safety Valve : - (WAM Brand) Level Indicators 2 pcs/Silo, Brand: WAM, Model: ILTC220, Fludifier Nozzle : 3 pcs/silo, Brand:WAM, Model: U025 Mechanical Valve and Arm : (WAM Brand) Silo charging pipe : Ø 114 mm steel pipe. FOR FURTHER INFORMATION, PLEASE FEEL FREE TO CALL US!!!

Condition: good (used), Saxon Bag Sealer Stainless Steel Complete with stainless steel mesh belt conveyor Variable speed control Adjustable Temperature control Suitable for heavy gauge bags Kdjdpfxozbnmgj Ai Ror Mesh belt 250mm wide Machine dimensions 1800mm Long x 800mm Wide Price € 6,950

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 1,800 kg, type of input current: three-phase, input voltage: 380 V, total height: 4,500 mm, total width: 1,400 mm, total length: 1,400 mm, The lime feed system is one of the main components of the desulphurization system. This particular system is installed in one of the incinerators. The main challenge was to ensure that the top section could be removed using a forklift with a maximum lifting height of 3 meters. Features: 1. A vibration motor is installed on the big bag mounting plate to improve lime dispensing. 2. The upper section is mounted on the hopper with a window, and the connection point is sealed. 3. A platform is provided for access to the window for opening the big bag. 4. The big bag is separated from the tray by means of a pneumatically operated valve. 5. The tray is suspended on strain gauges to monitor sorbent availability and adjust sorbent feed rate. 6. A level sensor is also included. 7. A mixer is installed in the tray. It also has a seal to prevent the sorbent from escaping the system. 8. The steel structure is designed to accommodate the installation of a screw conveyor. 9. The steel structure provides unobstructed access underneath for maintenance of the system components. Kdsdpfx Aiozphdge Rer

Condition: used, Year of construction: 2016, functionality: fully functional, We are offering this used NEWTEC BAG PALLETIZING Chimpal 600 palletizer, year 2016. Manufacturer: NEWTEC BAG PALLETIZING Model: Chimpal 600 Serial number: A1607 Year of manufacture: 2016 Type: 600.S1000.G067.053.OR3 Description: Palletizing Equipment Kdedpfxsyzzr Rj Ai Rjr The system can also palletize Euro pallets 800x1200 mm or CP1 1000x1200 mm. Maximum bag weight: 50 kg Capacity: up to 500 bags per hour Including sheet dispenser The system is currently in operation and can be inspected under working conditions until it is dismantled in September/October 2026. Test palletizing is possible during the summer. Newtec has been acquired by Haver & Böcker. Service for the palletizers is provided from Germany. A connected wrapper can be seen in the pictures, which is also for sale.

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 844, PLEASE READ THE DESCRIPTION CAREFULLY Used IPF25 filling machine with integrated weigher for filling paper open-mouth bags, including bags with handles. The machine is suitable for processing a variety of bulk products, such as: Cat litter Pet food Charcoal Wood pellets Other dry bulk materials .... Bag dimensions: Width: 150 to 300 mm Kodozrvldopfx Ai Redr Length: 300 to 600 mm Side gusset: 35 to 85 mm The machine is currently in our workshop and is undergoing refurbishment. The refurbishment work will be carried out in stages. If you are seriously interested, we can expedite this process so that the machine becomes available sooner. Please feel free to contact us for additional information or to arrange a viewing.

Year of construction: 2004, condition: used, functionality: fully functional, Silo Manufacturer: ZEPPELIN - Capacity: 10 m³ - Total height: approx. 5.00 m - Diameter: 2.0 m - Year of manufacture: 2004 - Inspection opening There are 3 units available, 1 of which is equipped with an internal rotary mixer Subject to prior sale. Please make inquiries by email only. Note: The machine/unit is still installed and can be inspected on site. Kdsdpfsualkkex Ai Rsr The buyer is responsible for dismantling and transport. This is not included in the offer price.

Year of construction: 2023, operating hours: 1,500 h, condition: excellent (used), functionality: fully functional, Abstracts Ksdpfx Aisztc Nfs Redr This is a high-quality system that mixes and homogenizes up to 3 additives in a hot mixer. The control system is included in the scope of supply. First, the material is transported from the production area to a storage silo. From this first silo, the material is fed into the hot mixer, then into the cooler, and finally into a second silo for intermediate storage. After that, there is the option to directly fill the powder onto a big bag filling scale or to compress it into pellets using a pellet press and then fill them. The steel structure is included in the scope of supply. Where necessary, the system is designed according to ATEX standards. In the Documents section, you will find a detailed English and German description of the complete scope of this system. Do not hesitate to call us to discuss and demonstrate the system. A similar system can be inspected in Europe. Main machines: • Mixaco hot mixer HM3000 - 400 kW • Mixaco cooling mixer KM9000 - 90 kW • Steel structure • AZO feeding station and gravimetric dosing for 2 solids and 1 liquid • AZO 2 special dosing scales for difficult-to-flow powders or solids • AZO 4 transport line, pressure and vacuum conveying • AZO 2 metrologically verifiable big bag filling stations • AZO control system • Kreyenborg silos ATEX 15 m³ • Kahl pelletizer 37-850 – 132 kW with box cooler and accessories The system was in operation at an R&D center in Israel. As the company now operates a production facility in Europe, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered at a port or in the production facility in Europe, EXW. The details for optimal transport need to be clarified. The machine price does not include packaging.