Used Thermal Expansion Valve for sale (9,330)

Condition: used, Refrigeration compressor, refrigeration machine, refrigeration compressor, refrigeration unit, cooling compressor, compressor, filter dryer housing, shut-off valve, ball shut-off valve, temperature switch, thermostat, expansion valve, thermal expansion valve -Manufacturer: Alco, thermal expansion valve, unused in original packaging Lajdpefyh Dtefx Amzjh -Type: TIE-MW 55/PCN 802456 -Price per piece -Number: 2 piece -Dimension package: 105/80/H70 mm -Weight: 0.4 kg/piece

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, FLOW & THERMAL Regenerative Thermal Oxidizer (RTO), 18,000 Nm³/h (2021) Complete industrial system for the treatment of process water containing Volatile Organic Compounds (VOCs), consisting of stripping columns and a three-chamber Regenerative Thermal Oxidizer. Manufactured by Flow & Thermal Solutions / TECAM in 2021, the equipment was installed at a PET production plant and remained operational until the factory closed on 27 November 2025. The system removes VOCs from the water by means of air stripping and subsequently destroys them in the RTO through high-temperature thermal oxidation. Heat recovery through ceramic media helps reduce natural gas consumption. Main features • Manufacturer: Flow & Thermal Solutions / TECAM • Year: 2021 • Serial number: F002 • RTO nominal capacity: 18,000 Nm³/h • Configuration: three-chamber regenerative RTO • Fuel: natural gas • Honeywell / Eclipse TJ 200 burner • Burner output: 58–586 kW • Electrical supply: 400 V, 50 Hz • Electrical power stated on the nameplate: 40 kW • 30 kW Soler & Palau ATEX main fan • Siemens PLC automation with HMI touchscreen • LEL monitoring, purge, dilution, bypass and pneumatic valve systems • Vertical stack: 10 m high, diameter: 800 mm • CE marked Performance and operation The equipment operated at actual flow rates close to its nominal capacity, with recorded values ranging from approximately 16,400 to 17,900 Nm³/h. The latest available emissions test, carried out by DEKRA in December 2023, recorded the following values: Lajdpfxezvcknj Amzoh • TOC: 13 mgC/Nm³ • NOx: 3–4 mg/Nm³ • CO: 125–153 mg/Nm³ During the tests, the equipment operated at an approximate temperature of 775–780 °C, with a treated water flow rate of 3.5 m³/h. Stripping columns The system includes: • Original stripping column, designed for approximately 6 m³/h. • Second Tecnium SLFKK9 stripping column, manufactured in PPH, with a nominal capacity of 8 m³/h and a maximum capacity of 10 m³/h. The second column was installed, but it is currently dismantled and lying on the ground after being knocked down by strong winds during the winter. It has a hole in the base which, according to the available information, is considered potentially repairable. The Tecnium column is equipped with internal packing, distributors, a mist eliminator, connections, drainage and provisions for integration with the existing control system. Condition and maintenance The system remained operational until the final closure of the plant in November 2025. The latest preventive maintenance was carried out by TECAM in June 2025 and included mechanical and electrical inspection, burner, fans, stripping columns, instrumentation, valves and functional testing. The equipment was operational, although maintenance work is required before recommissioning, mainly involving: • Process valves • Internal insulation of the towers • Ductwork and seals • Main fan impeller and expansion joints • Repair of the base of the second stripping column TECAM technical documentation is available regarding the recommended works, and several spare parts are also available. Scope of supply The system includes: • Three-chamber RTO • Combustion chamber • Burner and gas train • Main fan • Two stripping columns • Dilution and purge system • Hot bypass • LEL analysers • Stack • Ductwork • Electrical cabinets and controls • Platforms, ladders and support structures • Available spare parts

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, total width: 2,350 mm, total length: 6,000 mm, inner dimension length: 3,000 mm, inner dimension width: 1,600 mm, TECHNICAL DETAILS Oven dimensions: 3,000 x 1,600 mm MACHINE DETAILS External dimensions (L x W): 6,000 x 2,350 mm Firing: Gas Orientation: Vertical, for use with vacuum bags; connection to vacuum port inside oven EQUIPMENT 2 x trolleys included The following data is from a general offer; the seller accepts no liability for its accuracy. This also applies to the data sheet in the appendix. Electrical Voltage: 400 V Current: 16 A Frequency: 50 Hz Gas Type: Natural gas / Propane / LPG Connection: 1"1/4 Gas pressure: 20–60 mbar Propane/LPG consumption (4 burners): 8 kg Propane/LPG consumption (8 burners): 16 kg Natural gas consumption (4 burners): 9.6 m³ Natural gas consumption (8 burners): 19.2 m³ Temperature range (4 burners): 40–150 °C Temperature range (8 burners): 40–320 °C Lsdpfjxur Ndex Amzoah Power output (4 burners): 96 kW Power output (8 burners): 192 kW

Year of construction: 2018, condition: new, FireMaster Morgan Thermal Ceramics FireMaster® Marine Plus FM-MP69/16X14640X610S SUPER DISCOUNT! 19 Euro pallets available 16 boxes on each euro pallet x 19 euro pallets = approximately 304 boxes Material dimensions: Thickness 13 mm Width 620 mm Length 14,640 mm Density kg / m3: 96 Price per box 100 EUR + VAT In total there are about 304 boxes. Total price 30,400 Euro + VAT, negotiable , FCA: Satu Mare / Romania Manufactured from FireMaster® Plus fibre, FireMaster® Marine blanket is a highly insulating blanket especially developed for fire protection Plus applications that are very space or weight sensitive Classification temperature FireMaster® Marine Plus blanket: 1200°C (2192°F) Fire reaction properties Non-Combustible in accordance with IMO FTP Code Part 1 Index < 0.5 when tested in accordance with UK MOD Defence Standard 02-713 Class A1 Reaction to Fire in accordance with EN 13501-1 Thermal insulation performance Thermal insulation at ambient temperatures R Values (m² K/W) and corresponding U values (W/m²K). For densities above 80 kg/m³ the values for 80 kg/m³ may be used Basis Thermal conductivity measured at 10°C using BS EN 12667 method 48 kg/m³ 0.0321 W/mK 64 kg/m³ 0.0319 W/mK 70 kg/m³ 0.03164 W/mK 80 kg/m³ 0.03144 W/mK Thermal conductivity at high temperatures Thermal conductivity (W/mK) at mean temperature measured using ASTM C201 method Please check the attachment with the technical data. We reserve the right to make mistakes, changes and prior sale Lsdpfx Amoh Rawujzoah Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, Year of construction: 2021, functionality: fully functional, Dürr Ecopure VAR 2206 Thermal Oxidizer with Flue Gas Cleaning (2021) For burning liquid and gaseous waste streams including fluorinated gases, e.g. PFAS, and recovery of aqueous hydrogen fluoride Emissions limits SO2 ≤ 100 mg/Nm³ NOX ≤ 30 mg/Nm³ CO ≤ 50 mg/Nm³ CF4 ≤ 70 mg/Nm³ HF ≤ 1 mg/Nm³ NH3 ≤ 2 mg/Nm³ Comprising Direct fired thermal oxidizer Hot gas cooling and acid recovery Alkaline wet scrubber Honeycomb selective catalytic reduction deNOx system Laedpfxjz Ai Tpj Amzeh >1M cost spare parts Direct fired thermal oxidizer Including 2x natural gas combustion chambers and burners - High calorific liquid waste requires safe ignition supplemental hydrogen supply for acid formation - Gaseous waste streams injected via nozzles downstream and close to the burner - 1.5MW multi-fuel natural gas & liquid waste (minor fuel stream) burner with natural gas capacity up to 200Nm3/h - 1400C normal, 1540C max allowable temperature destruction of pollutants to reduce emissions with 3.28 MW thermal energy transfer - 2 seconds minimum residence time in combustion chamber at 1400C - 1,800mm combustion chamber internal dia. - Approx 300mm refractory lining - 2,400mm combustion chamber external dia. - 12,000mm combustion chamber internal length - 3.28MW maximum thermal capacity - 4,900Nm3/h, 60mbar, 14kW combustion air fans One chamber is active, the other one is on standby and can be prepared, repaired, or maintained. This allows minimizing shutdown and changeover time to only several days Wet scrubber hot gas cooling and acid recovery SGL Carbon Diabon HT-PQ 850 graphite pipe quencher - 6,000 Nm3/h capacity flow - 1,100 mm dia. - 2,000mm high - pumps SGL Carbon Diabon THX-RS falling film absorber shell & tube heat exchanger - 1,100mm dia. - 4,500mm tube length - 595 no. tubes - 22mm tube internal dia. - Graphite, carbon steel - pumps Quench vessel - PP/FRP - 1,100mm dia. - Approx. 6,000mm high 2x Scrubber absorber columns, each - Shell FRP/PP - Internals PP - 1,000mm dia. - 11,000mm high - Pumps - Dosing station FRP 5m3 Emergency water tank - 1,600mm dia. - 3,000mm high - 3kW heating 2x Teblick 100,000L HDPE hydrofluoric acid tanks (2019) Honeycomb selective catalytic reduction deNOx system - 5,900Nm3/h, 130mbar, 42kW induced draft fan - 320 kW gas/gas heat exchanger - 500 kW capacity reheat burner - 1.2m deNOx honeycomb catalyst Clean gas outflow Stack with flow & temperature measurement Spare parts include - 200 items of sensors, pumps, valves, gaskets, joints etc. - Graphite quencher - Falling film absorber With the redesign and maintenance support of Dürr, the system could also - be adapted to other halogenated gases with bricks to be selected according to gas application - cope with the presence of VOCs or contaminated air - larger volumes with the addition of a small lance for 15kg/h liquid injection

Condition: used, ESPEC Temperature Shock Chamber ESPEC TSA-72EL-A Temperature Shock Chamber Water-cooled For sale is a used ESPEC temperature shock chamber, model TSA-72EL-A from the manufacturer ESPEC CORP. This chamber is suitable for temperature shock tests, temperature cycling tests, material testing, electronics testing, automotive applications, quality assurance, and research and development. Technical Data Manufacturer: ESPEC CORP. Ljdpfszhkfqsx Amzeah Model: TSA-72EL-A Type of equipment: Temperature Shock Chamber System: 2-zone testing with damper switching Design: Air-cooled Test chamber volume: approx. 72 liters Internal dimensions of test chamber (W × H × D): 410 × 460 × 370 mm External dimensions (W × H × D): 1310 × 1900 × 1470 mm Weight: approx. 900 kg Temperature range, hot chamber: +50 °C to +200 °C Temperature range, cold chamber: -65 °C to 0 °C Temperature stability: ±0.5 °C Preheating temperature: up to +205 °C Pre-cooling temperature: up to -75 °C Heating time: from ambient temperature to +200 °C within approx. 15 minutes Cooling time: from ambient temperature to -70 °C within approx. 40 minutes Temperature recovery condition: +125 °C / 30 min. to -40 °C / 30 min. Temperature recovery time: within approx. 5 minutes Max. test chamber load: 30 kg evenly distributed Cable entry: Ø approx. 50 mm Compressed air supply: 0.4 to 0.7 MPa / 4 to 7 bar Refrigerant, high-temperature side: R404A Refrigerant, low-temperature side: R23 Power supply: AC 400 V / 3 phases / 50 Hz Max. current consumption: 45 A Features Color touchscreen control TFT color LCD, 10.4 inches PID temperature control Program memory Trend graphics Alarm history Eco mode Automatic defrost RS-485 interface Over-temperature / under-temperature protection Vertical sliding door Stainless steel test chamber Mechanical cascade refrigeration system Electronic expansion valve Sirocco circulating air fan Damper drive via air cylinder 2 stainless steel test inserts Cable entry, Ø approx. 50 mm Application areas Temperature shock testing Temperature cycling testing Electronics testing Semiconductor testing Automotive Component testing Material testing Quality assurance Research and development Condition Used Optical condition as shown in the images Scope of delivery 1x ESPEC TSA-72EL-A Temperature Shock Chamber 2x Stainless steel test inserts Accessories as shown in the images Important note: For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection Inspection possible by appointment. Forklift available for loading. Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We would be happy to answer any further questions by telephone.

Condition: excellent (used), MECALSA Continuous Industrial Fryer with Thermal Oil – Stainless Steel MECALSA continuous industrial fryer with a thermal oil heating system, designed for the continuous frying of food products in medium and high-capacity production lines. The equipment features a longitudinal process tank and a transport system that allows the product to remain in the oil for a controlled residence time. Indirect heating via a thermal oil circuit provides the necessary energy to the process while keeping the thermal fluid separate from the frying oil. Its construction, primarily in stainless steel, along with vapor extraction and process control systems, makes it particularly suitable for professional installations in the food industry. MAIN FEATURES -Manufacturer: MECALSA -Type: Continuous industrial fryer -Heating system: thermal oil -Continuous frying process -Longitudinal frying tank -Automatic product transport -Adjustable residence time depending on configuration -Circulation and control of frying oil -Independent thermal oil circuit -Indirect heat exchange -Temperature control -Piping and valve system -Vapor extraction system -Extraction hoods and ducts -Control electrical panel -Construction primarily in stainless steel -Industrial structure for continuous operation -Access points for inspection, cleaning, and maintenance -Integrable into automatic processing lines PROCESS The product is continuously fed into the MECALSA fryer and guided through the frying zone by the internal transport system. During this process, the product remains in contact with the frying oil at a controlled temperature for the time needed to achieve the required final characteristics of cooking, color, and texture. Heat is supplied through a thermal oil circuit, which transfers energy to the system without directly mixing with the oil used for frying the product. Ledpfx Amszxwxxozsah The vapors generated during frying are collected by the hoods and channeled to the extraction system. APPLICATIONS Especially suitable for manufacturers of pre-fried products, processed vegetables, potatoes, snacks, breaded products, and other food preparations that require a continuous frying process. Depending on the installed configuration, it can be used for: Potatoes and related products Vegetables Breaded or battered products Prepared meat products Fish and fish products Snacks Pre-cooked products Other specialties compatible with continuous frying It can be integrated with feeding systems, scalding units, dryers, conveyors, excess oil removal systems, coolers, IQF freezers, and packaging equipment. The combination of MECALSA technology, continuous process, and thermal oil heating provides an industrial solution for lines requiring uniform and controlled frying. Machine available for inspection. Additional technical information, production capacity, operating temperatures, dimensions, additional photographs, or videos can be provided upon request.

Condition: new, Year of construction: 2024, functionality: fully functional, Wood thermal modification kiln fully equipped for thermo wood production, included: 15 m high AISI 316L isolated double wall chimney, inlet/outlet piping, pressure valves, gages, air compressor, full wood pellet heating unit, Siemens control panel, timber loading/unloading platform, 2 sets of timber spacers. Timber volume 7...8 m3, depends on bord dimensions and length; Inner chamber for timber length up to 7,5 m, total kiln length 10 m; Full thermal modification cycle time ~24 h from heating up to cooling down; Temperature can be set up to 230°C or more if needed; Required nominal grid power 25 A, can be used without grid with power generator; To produce 1 m3 thermally modified timber: 9...10 kWh + 55...60 kg wood pellets = 16...20 EUR without labor costs; Ljdpfx Amsvzub Hjzsah Our wood thermo modification kilns can be made according to customers needed length from 3,6 to 9 m (from 3 to 9 m3 timber volume);

Condition: used, Year of construction: 2016, 2 identical thermal oil boilers for industrial process heat supply are offered. Equipped with: attached burner system, thermal oil piping connections, circulation/pump components, valves and monitoring devices, insulated piping, stainless steel cladding, integrated viewing/inspection area at the boiler front. Inspection possible by appointment. Laodpfx Aez Ibx Ssmzsh

Condition: used, A high-quality liquid transfer and control package consisting of 4 identical Grundfos horizontal multistage pumps and a comprehensive set of industrial blue butterfly valves with flexible rubber expansion joints. Fits for industrial water loops, water treatment boosting systems, pressure maintenance, or process engineering setups. The Package Includes: 1. Horizontal Multistage Pumps:4 units x Grundfos CM15-3 A-R-A-E-AQQE-A-A-N Motor Power: 4.0 kW (Motor Type: MG100LB)Flow Rate (Q): 17 m³/h (74.8 GPM)Nominal Head (H): 44.6 m (63.5 PSI)Max Head (Hmax): 51.1 m (72.7 PSI)Pressure Rating: Max 10 bar (145 PSI) / Max 90 °COrigin: 2. Industrial Valves & Fittings :Large batch of industrial butterfly valves (Blue body with manual lever handles for quick on/off flow isolation).Matching pipe connection segments and end caps. (please see photo) Ljdpez Ahmbsfx Amzoah Condition: Used, clean, stored carefully in a dry box inside an indoor warehouse.

Condition: used, functionality: fully functional, Micro and mini plasma welding generator, complete with torch and power cables. Suitable for welding stainless steel with thicknesses ranging from 0.5 to 1.00 mm. Laedpfx Aozlud Ejmzoh Power supply: 380-41.5V (12A). Maximum welding current: 150A, with a welding speed of 5 to 10 mm/sec.

Condition: like new (used), Year of construction: 2020, Like-new Bilz ISGG 3412LK induction thermo-shrinking machine, manufactured in 2020: Fast and professional shrinking, integrated air cooling. Type: ISGG 3412LK Serial number: 2073551-02 Date of manufacture: 43/20 Rated voltage: 400 V Rated current: 16 A Frequency range: 50-60 Hz Lajdpfx Ame Ac R Dgszsh Includes standard coil and special coil with a through-hole for HSK63 (the collet can be guided through the coil for "mushroom-type tools"). Includes 7 ferrite covers for various diameters. Lightly used, practical table-top unit – only being sold because we are closing our business. If you have any questions or require further information, please send us a message or call us.

Condition: new, Year of construction: 2022, functionality: fully functional, type of input current: three-phase, power: 50 kW (67.98 HP), input voltage: 400 V, fuel: domestic gas H, overall weight: 2,200 kg, nominal power: 50 kW (67.98 HP), input frequency: 50 Hz, continuous power: 50 kW (67.98 HP), input current: 72 A, Equipment: documentation/manual, For sale: new and unused 2G g box 50plus combined heat and power (CHP) unit from 2022. This is a 2G Energietechnik g box 50plus, configuration as70 4, suitable for simultaneous generation of electricity and heat using natural gas. The unit has never been put into operation and is in new condition. At full load, the CHP unit delivers 50 kW of electrical power and approximately 104 kW of thermal power. The unit is designed for 400 V and 50 Hz and is equipped with a Liebherr G924 natural gas engine and a Leroy Somer LSAH 44.3 generator. Technical specifications: • Manufacturer: 2G Energietechnik GmbH • Type: g box 50plus • Configuration: as70 4 • ID number: H1214 • Year of manufacture: 2022 • Electrical power: 50 kW • Thermal power: approximately 104 kW • Rated voltage: 400 V • Rated frequency: 50 Hz • Rated current: 72 A • Weight of CHP module: approximately 2,200 kg • Fuel: natural gas • Electrical efficiency: approximately 34.5 percent • Thermal efficiency: approximately 71.8 percent • NOx emissions: less than 125 mg per Nm³ • Sound pressure level of CHP: approximately 55 dB(A) at 1 meter The offered package consists not only of the CHP module. The installation also includes two Viessmann boiler bodies, one Viessmann Proflame VM IV 3 gas burner, a separate control cabinet, and various flue gas components, fittings, and related documentation. The original new price of the complete installation was approximately €189,000. Laodpfx Aez Hngmemzeh The installation comes from a project for which it was ultimately not used. The various main components are from 2022 and have been stored without being put into operation. Due to the size and composition of the installation, we advise interested parties to contact us in advance for further technical information, photos, documentation, and an overview of the components available. An inspection is, of course, possible (location: Winterswijk, Netherlands). Loading onto the buyer's transport vehicle is possible on site.

Condition: good (used), Year of construction: 2019, functionality: limited functionality, machine/vehicle number: 377/2019, cutting width (max.): 1,000 mm, type of input current: three-phase, input current: 25 A, working width: 1,050 mm, input voltage: 380 V, input frequency: 50 Hz, Equipment: documentation/manual, TTR and hot foil slitter/rewinder. TTR1000 Material width: max 1050mm Max unwinding diameter: 700mm Max rewinding diameter: 150mm Max jumbo core length: 1100mm Rewinding shafts with tooling: 1 inch and 1/2 inch Laodpfx Amsz R Rdrszoh Slitting system: razor blade manual set 2 rewind turrets (upper and lower) for easy change The machine is generally in good condition. It has tension control issues on one of the shafts, likely related to the magnetic powder clutch. The machine is still installed and ready for production, so we can arrange a live demo.

Year of construction: 2004, condition: used, functionality: limited functionality, machine/vehicle number: ST 5151, We offer this used Envirotec Envitherm 50.0/3 W thermal afterburning system, manufactured in 2004. Manufacturer's serial number: ST 5151 Year of manufacture: 2004 Three-chamber operation Exhaust gas volume: 50,000 Nm³/h Combustion chamber temperature: 800°C The system essentially consists of three reactor vessels, which are filled with honeycomb bodies as heat storage. Ledoz Stbzepfx Amzsah The system is equipped with two hot bypasses and an energy recovery system. If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, machine/vehicle number: FN535356, Year of construction: 2017, operating hours: 3,483 h, load capacity: 3,500 kg, lifting height: 3,600 mm, fork length: 1,800 mm, Equipment: UVV, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 3,500 kg Lifting height: 3,600 mm Fork length: 1,800 mm MACHINE DETAILS Mast type: Duplex mast Drive type: LPG Dimensions & Weight Dimensions (L x W x H): 5,700 x 1,300 x 2,420 mm Own weight: 4,896 kg UVV certification valid until: 05/2027 Next service due in: 516 hours Starter battery: new in 05/2027 Operating hours: 3,483 hours EQUIPMENT Former Jungheinrich full-service unit Side shifter Free-lift mast without center hydraulic cylinder 3rd valve Full cabin Heater Windshield wiper LED work light (front) LED work light (rear) Comfort seat LPG cylinder exchange system All dimensions are rounded values. No warranty is given for typing or measurement errors. Collection conditions: Lsdpfx Aez S Nriemzoah Lateral loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible for truck heights of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receiving payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 172

Condition: used, Year of construction: 2010, functionality: fully functional, THERMAL processor SIRIO TH 85 with input bridge To connect inline with CTP. Lasdpozquq Asfx Amzoh MACHINE IS READY TO WORK.

Year of construction: 1993, condition: used, functionality: fully functional, We offer this used ALMORE Mini calo cutting line for thermal insulation, built in 1993, with a double unwinding unit from Jouanel, in very good working condition. These machines are specialized in sheet metal processing and are particularly suitable for thermal insulation, industrial thermal insulation, and ventilation workshops. Laedpfxjz Dtmao Amzjh Functions include: length cutting, deburring, punching, and profiling. Machine weight: 2 tons. If you have any questions or need further information, please do not hesitate to send us a message or call us.

Condition: good (used), functionality: fully functional, Year of construction: 2016, operating hours: 3,312 h, load capacity: 2,500 kg, lifting height: 5,450 mm, free lift: 1,750 mm, load center: 500 mm, fuel type: electric, mast type: triplex, battery capacity: 625 Ah, battery voltage: 80 V, DGUV certified until: 10/2027, tire condition: 95 %, front tire type: cushion tires (black), rear tire type: cushion tires (black), total height: 2,480 mm, Equipment: 3rd hydraulic function, 4th hydraulic function, CE marking, UVV, cabin, full service history, lighting, sideshift, Still RX 60-25 electric forklift with the following technical specifications: · Operating hours: 3,312 · Lifting capacity: 2,500 kg · Lifting height: 5,450 mm · Overall height: 2,480 mm · Year of manufacture: 2016 Lodpfx Ams Adny Iozsah STILL 2.5-ton electric forklift with full cabin and heater, very good battery, tires in new condition, triplex mast with full free lift, side shifter, fork positioner, lighting, single-pedal operation, mini joystick, fork length 1,200 mm (other fork lengths available on request), charger. Includes 1,000 hours of service according to STILL manufacturer specifications and a valid UVV inspection upon sale. Inspection, demonstration, and test drive are available by appointment. Sale is exclusively to commercial businesses; subject to prior sale, errors, and omissions. We can deliver your new forklift cost-effectively using our own ramp-type low-bed trailer (transport costs upon request). You can find more information and offers on our website!

Condition: excellent (used), Year of construction: 2011, 348 USED Heuft thermal oil ovens. Year of manufacture (deck oven): 2009 Year of manufacture (rack oven): 2011 Laodpfx Aezxp Dyjmzsh EQUIPMENT: - 1 Heuft rack oven, model VTR 10.12.5.09, for 60x100 cm trays - 1 Heuft deck oven, model VT0 216 33, with a baking area of ​​15 m² (oven features temperature zoning for 3+3 decks) - HK 200 heating boiler - Trolleys for rack ovens The price is a net price. Pais options available: transport. Our languages: ENGLISH, GERMAN, FRENCH, RUSSIAN, UKRAINIAN.

Condition: excellent (used), For sale: a functional Rexroth hydraulic pump with a mounted Rexroth control valve. The condition of the housing, shaft, connections, and other components is shown in the photos. The following markings were read from the nameplates: Component Designation / Number Pump Type SY2DFEE-20/100-100 Pump Material Number (MNR) R901073415 Pump Serial Number 31132779 Additional Number on the Pump Nameplate Pump Designation FD 07W02, SN 000001 Valve Type VT-DFPE-A-22/G24K0/2D0V/V-019 Valve Material Number (MNR) R901031176 Additional Number on the Valve Nameplate Valve Designation SN 000002 The pump is used and shows signs of wear, as visible in the photos. Before purchasing, it is recommended to compare the complete markings on the nameplates, as well as the shaft and connections, with the requirements of your machine. Laodpfxsz Spfrj Amzjh

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, operating hours: 11,000 h, 1. Applications & Design Designed as a horizontal bandsaw with a table layout, this machine is ideally suited for use in forges, rolling mills, die casting operations, steel finishing facilities, and tool & mold manufacturing environments. Its low table height enables installation directly on standard shop floors, simplifying material transport and handling. 2. Cutting Capacity Cutting range for round material (90°): up to 1,100 mm Cutting range for flat material (90°): up to 1,100 × 1,100 mm (Approximately 43.3 × 43.3 inches) 3. Performance & Drive System Drive power: 15 kW Saw blade speed: Infinitely adjustable between 8 – 84 m/min Total installed power: 30 kW Saw blade dimensions: 14,330 × 80 × 1.6 mm 4. Table Specifications Lasdpfew Tulgjx Amzoh Table size (L × W): 3,000 × 1,500 mm Maximum table load: up to 30,000 kg Workpiece support height: 700 mm 5. Machine Footprint & Weight Overall length: 6,000 mm (approximate) Width: 8,100 mm (approximate) Height: 3,850 mm (approximate) Machine weight: around 16,000 kg 6. Notable Features & Options Independent traversable clamping system: Both the material clamping vice and the blade guide arms are independently movable, allowing large or oversized workpieces to be securely clamped without manual repositioning to a fixed side. Robust gantry frame: Two solid columns and support bars provide excellent stability, high load capacity, low vibration operation, and long service life. Optional 90° blade guide rotation: Allows both vertical and horizontal cutting, especially useful for notching sample workpieces. Powered duplex chip brushes: These automatically adapt to keep the saw blade clean during operation, enhancing blade life and reducing maintenance of the brushes. Integrated chip conveyor with coolant tank: Located beneath the cutting zone – collects chips and coolant, can be pulled out easily for cleaning. Open-access design for easy maintenance: All wear and maintenance parts are easily accessible, simplifying servicing, blade changes, and minor repairs. No foundation work required for installation.

Condition: good (used), Year of construction: 2012, Approx. 170 units, pneumatic drive, spool valve, M&S, PAMS1 – used: Price per unit, ex works: €300.00 (net)! Manufacturer: M&S Type: PAMS1 Year of manufacture: 2012 Spring (normally closed) Operating pressure: 4.8 - 8 bar Air consumption: 1.2 – 2 L/stroke Condition: good Available: immediately Location: Bünde, North Rhine-Westphalia Ljdoz Sdyiopfx Amzjah

Condition: excellent (used), The Freeman FUSING 48M is a professional machine designed for the thermal bonding of materials using temperature, pressure, and a conveyor belt. The device is used in the apparel, footwear, and leather industries, as well as in the production of laminated materials. Laedpfsz Sm S Ujx Amzsh The machine enables the durable bonding of interlinings, adhesive layers, and other reinforcing materials to fabrics and leather. Thanks to adjustable temperature, pressure, and belt speed, it allows for precise adjustment of operating parameters to suit the material being processed. Technical specifications: Manufacturer: Freeman Model: FUSING 48M Serial number: 9315 Power supply: 220 V 1 phase (1PH) Temperature control Pressure control Belt speed control Heated conveyor belt Pressure gauge Feeding and receiving table Steel construction Manufacturer: The Louis G. Freeman Co., USA Applications: Bonding of interlinings and apparel linings Lamination of fabrics and technical materials Production of clothing and leather goods Bonding of materials using heat-activated adhesives Heat transfer and fixing of appliques

Condition: ready for operation (used), functionality: fully functional, power: 0.37 kW (0.50 HP), DMN BL-150 Rotor: stainless steel (scraping blades) Housing: steel 2.5 liters per revolution 20 rpm Motor: Ledpfx Amsz Rpn Uezjah 0.37 kW 1380/20 rpm 1.24 A 4 units available