Used Thermofisher / Dionex Ultimate 3000 for sale (4,937)

Condition: used, Dionex / ThermoFisher FLM: Temperature range: 5–70 °C (max. 15 °C below ambient temperature) Temperature accuracy: ±0.5 °C Temperature stability: ±0.1 °C Temperature precision: ±0.1 °C Column capacity: Up to 3 columns, max. 30 cm length Heating time: From 20 to 50 °C in less than 25 min (at 23 °C ambient temperature, ±0.5 °C) Cooling time: From 50 to 20 °C in less than 35 min (at 23 °C ambient temperature, ±0.5 °C) Control: All functions software-controlled via USB 1.1 I/O interfaces: 2 digital inputs, 2 programmable relay outputs Column recognition: Electronic identification system for 3 columns Switching valves: 1 or 2 thermostated microvalves with low dispersion (10 ports or 6 ports) Flow splitter: Nano, capillary, or thermostated micro-flow splitter with flow splitter identification system Flow control: Electronically controlled and actively balanced flow splitter, independent of solvent composition and backpressure Column flow range: 50 nL/min to 2.5 mL/min using a predefined splitter and active flow control Laedpfx Aoxtb Efem Noa Flow range selection: 50 nL/min to 1,000 nL/min (using a Nano-LC splitter) 0.5 μL/min to 10 μL/min (using a capillary LC splitter) 10 μL/min to 160 μL/min (using a micro-LC splitter) Gradient delay time: Typically 600 nm. Noise: At a wavelength:

Condition: excellent (used), Here we offer an ICS system. Flow rate range: 0.000 to 10.000 ml/min (analysis); 0.000 to 3.000 ml/min (capillary). Flow rate accuracy: < 0.1 %. Flow rate precision: < 0.1 %. Gradient dosing accuracy and precision: ± 0.5 % at 2 ml/min (analysis only) Pressure range: 0 to 35 MPa (0 to 5,000 psi) (analysis); 0 to 41 MPa (0 to 6,000 psi) (capillary) Dimensions (H x W x D): 14 x 8.25 x 19 in. (36 x 21 x 48 cm) Weight: 55 lb. (24.1 kg) (ICS-5000) Power supply: 9 to 265 V AC, 47 to 63 Hz The system consists of the following components: ICS-5000 plus Dual Pump 6Port Valve MXP9900-000 AFC-3000 Automated Fraction Collector RFC-10 Controller Condition: used / used Scope of delivery: (See pictures as shown) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you. Laodpfxshh Ibto Am Noa

Condition: good (used), Model No. SHKA3000 The machine runs on 120V! If necessary we will provide a voltage converter. Width (inch/cm) 29.4 in (74.7 cm) Height (inch/cm) 9.7 in (24.6 cm) Length (inch/cm) 25.8 in (65.5 cm) Weight (lbs/kg) 171 lbs (77.6 kg) Volts (AC) 120 Amps 1.0 Watts 100 Frequency (Hz) 50/60 Speed 40 to 400 rpm, ±10 rpm Timer Continuous or timed from 1–60 mins Laodpfjx R Tvtsx Am Nja Good working condition. Please check out our other listings as well.

Condition: used, This listing is for a Thermo Scientific Dionex AS-DV Autosampler. The unit is in full working condition and is ready for immediate release. Please note that ULM do not check or guarantee the provision of software Software Thermo Scientific Chromeleon 7 license key usb- Built for the lab and IT, Chromeleon CDS chromatography software enables both productivity and regulatory compliance with automated controls, data analysis, and security tools. The Thermo Scientific™ Dionex™ AS-DV Autosampler is an innovative solution for automating sample handling in routine ion chromatography applications. It’s designed to enhance productivity while maintaining cost-effectiveness, perfect for labs focused on ion and water analysis. Key Features: Automated Sample Handling: Random Access and Flexibility: Offers random access for multiple injections and filtration, allowing labs to run samples efficiently without manual intervention. High Reproducibility: Ensures consistent results thanks to precise mechanics that control dispense speed and volume. User-Friendly Control: Please note that ULM not to check the software and cannot guarantee the provision Chromeleon™ CDS Software: The powerful software simplifies programming for injection loops and concentrator columns, allowing users to easily set optimal parameters. Advanced Sample Preparation: Optional Six- or Ten-Port Valve: This feature facilitates complex sample preparation techniques, including matrix elimination and sample concentration, enhancing analytical capabilities. Performance & Compatibility: Needle and Flow Path: Constructed from all-Thermo Scientific™ PEEK™, ensuring durability and minimal contamination. Vial Compatibility: Works with 5.0 mL and 0.5 mL polymeric vials, and filter caps can be used for automatic filtration, promoting better results. Lsdpfxjxhf Utj Am Nsaa Injection Volume Range: Supports injection volumes from 0.1 to 5 mL, accommodating various experimental needs. Sample Capacity: Can hold up to 50 vials of either size or a mix of vials, adding to its versatility. Specifications: Dimensions: Height: 9 in (23 cm) Width: 17.5 in (44.45 cm) Depth: 22 in (56 cm) Weight: 16 kg Speed Control: Adjustable from 0.1 to 5.0 mL/min in 0.1 mL/min increments. Voltage: Compatible with 100/240 V. Compatibility: Works seamlessly with various ICS systems, including ICS-5000, ICS-2100, ICS-1600, ICS-1100, ICS-900, and legacy IC systems.

Condition: good (used), Technical data for the shelf rack: Shelving system: SSI Schäfer Type: R 3000 Technical data for installation: Number of shelving rows: 01 pc Shelf length: 47,330 mm Number of bays per shelving row: 29 pcs Scope of delivery: 30x shelf upright frames, used Material finish: sendzimir galvanized Design: slotted Adjustment grid: 26.5 | 26.5 mm Frame profile dimensions: 31x60x0.88 mm Weight / pc.: approx. 8.92 kg Incl. cross braces and base plates (upright frames are pre-assembled) 2,490 mm high 600 mm deep 174x shelves, used Material finish: sendzimir galvanized for upright depth: approx. 600 mm Total width: approx. 1,600 mm Total depth: approx. 594 mm Height: approx. 30 mm Weight / pc.: approx. 8.12 kg Max. load per shelf 75 kg, with evenly distributed load. 696x shelf supports, used Suitable for smooth uprights Material finish: sendzimir galvanized 10x cross bracing, used Type designation: KV31313 Weight / pc.: approx. 0.405 kg Material finish: sendzimir galvanized 01x load sign with information on bay and shelf loading, manufacturer and commission number Dimensions: 297 x 210 x 2 mm Your contacts in our company: Lajdpfey Enpqjx Am Noa Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information on the item: This item is offered for collection only. If transport or shipping is required, additional costs will apply, which can be requested from us separately depending on the delivery location and scope of delivery.

Condition: good (used), Technical specifications for the shelving unit: Shelving system: SSI Schäfer Type: R 3000 Technical setup information: Number of shelving rows: 01 pc. Lodjyzyt Hopfx Am Nsaa Shelf length: 1,660 mm Number of bays per shelving row: 01 pc. Scope of delivery includes: 02x shelving uprights, used Material finish: Sendzimir galvanized Design: slotted Adjustment pitch: 26.5 | 26.5 mm Frame profile dimensions: 31 x 60 x 0.88 mm Weight per piece: approx. 8.92 kg Incl. bracing and base plates (Rack uprights are pre-assembled) 2,490 mm high 600 mm deep 06x wire mesh shelves, used Material finish: Sendzimir galvanized For upright depth: approx. 600 mm Total width: approx. 1,600 mm Total depth: approx. 590 mm Total height: approx. 30 mm Frame profile: approx. 25 x 25 mm Mesh size: approx. 68 x 50 mm Weight per piece: approx. 6.90 kg Note: Water-permeable (up to 70%), suitable for sprinkler systems and thus optimized fire protection. Air-permeable – allows good air circulation, suitable for example in deep-freeze warehouses. Light-transmitting – creates a bright working environment in the warehouse. 24x shelf supports, used Suitable for slotted uprights Material finish: Sendzimir galvanized 01x diagonal bracing, used Model designation: KV31313 Weight per piece: approx. 0.405 kg Material finish: Sendzimir galvanized 01x load sign Indicating bay and shelf loads, manufacturer and commission number Dimensions: 297 x 210 x 2 mm Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any required delivery or shipping of this item will incur additional costs, which can be requested individually depending on the place of delivery and scope of supply.

Condition: good (used), Technical Data for Shelving System: Shelving system: SSI Schäfer Lodpfx Ameyzwz Uj Njaa Type: R 3000 Technical Data for the Setup: Number of shelving rows: 1 unit Length of shelves: 1,660 mm Number of bays per row: 1 unit Scope of delivery includes: 02x Shelf rack uprights, used Material colour: sendzimir galvanized Design: slotted Adjustment pitch: 26.5 | 26.5 mm Frame profile dimensions: 31 x 60 x 0.88 mm Weight / unit: approx. 8.92 kg Incl. cross brace and base plates (Rack uprights are pre-assembled) Height: 2,490 mm Depth: 600 mm 06x Shelves, used Material colour: sendzimir galvanized For upright depth: approx. 600 mm Total width: approx. 1,600 mm Total depth: approx. 594 mm Height: approx. 30 mm Weight / unit: approx. 8.12 kg Max. load per shelf 75 kg, with evenly distributed load. 24x Shelf supports, used Suitable for slotted uprights Material colour: sendzimir galvanized 01x Cross brace, used Model designation: KV31313 Weight / unit: approx. 0.405 kg / unit Material colour: sendzimir galvanized 01x Load sign With information on bay and shelf loads, manufacturer, and order number Size: 297 x 210 x 2 mm Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. Transport or shipping of this item can be arranged for an additional charge, depending on delivery location and scope, to be requested individually from us.

Condition: excellent (used), For sale: Professional industrial extraction unit by TEKA, model STRONGMASTER BIA, designed for welding fume extraction and air pollution control. ‼️ VERY LOW HOURS – ONLY 1,550 OPERATING HOURS (this is rare for this type of equipment) ⚙️ Technical specifications: Manufacturer: TEKA (Germany) Model: STRONGMASTER BIA Capacity: 3,000 m³/h Max. negative pressure: 2,500 Pa Motor power: 1.1 kW Power supply: 400V (3PH + N + PE) Frequency: 50 Hz Rated current: 2.5 A Protection class: IP54 Control voltage: 24V Weight: approx. 130 kg 🔧 Equipment: Flexible extraction arm Industrial filter Control panel Operating hours counter Mobile chassis with wheels 🔍 Condition: Used equipment, in good technical condition. Normal signs of use visible. ✅ Low hours – only 1,550h Lasdpfx Amoyz Dils Nsa ➡️ Equipment is only lightly used ➡️ Significant potential for further operation

Condition: good (used), For sale: professional transport ventilator Dräger Oxylog 3000 Plus – a device used in emergency medical services, ambulances, and healthcare facilities. Condition: The device powers on and works. The screen is clear, buttons and knobs are operational. Visually, it shows normal signs of use. The casing has minor cosmetic damage, which does not affect functionality or operation. Features: transport ventilation for adults and children; ventilation modes as per the Oxylog 3000 Plus model; adjustable breathing parameters; clear display with alarms. Included: Dräger Oxylog 3000 Plus ventilator, carrying bag, cables and connectors as shown in the photos. Additional information: used medical equipment; sold exactly as shown in the pictures; ideal as a backup transport ventilator for an ambulance, hospital, or technical unit. Ljdpfx Amjx Tuyxj Njaa

Condition: good (used), Technical specifications for shelf panel: Racking system: SSI Schäfer Lajdpfjwvq Epox Am Nea Type: R 3000 Scope of delivery includes: shelf panels, used Material color: Sendzimir galvanized total width: approx. 1,295 mm total depth: approx. 790 mm for upright depth: approx. 800 mm height: approx. 40 mm number of reinforcement beams: 2 pcs Weight / pcs.: approx. 12.82 kg Currently available in stock: 1,338 pcs. Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. Any transportation or shipping of this item involves additional costs, which can be requested from us depending on the delivery location and/or scope of delivery.

Condition: new, Year of construction: 2024, load capacity: 3,000 kg, container turning device, welding table, welding turntable, roller stand Ljdpfx Amogu Edys Nsaa 3000 Kg load capacity with foot remote control Speed infinitely variable 80 to 1600 mm / min. diameter 40mm to 1400mm Roller diameter 200mm L: 800 x W:370 x H:450 Model or color deviation possible

Condition: ready for operation (used), OIL MIST EXTRACTION, CENTRIFUGAL OIL MIST EXTRACTION, EONAG 3000 Used machine Manufacturer: Innovations-Center Type: Eonag 3000 Year of manufacture: 2012 Enclosure dimensions: 1000 x 570 x 1750 mm Lsdsu Nu Rhopfx Am Noaa Electrical data: 400 V; 50 Hz - 4000 m³/h - 84 dBA - 2800 l/min

Condition: used, This listing is for a Dionex HPLC System Dionex AS3500 Dionex GP50 Gradient Pump Dionex ED50 Electrochemical Detector Dionex AD250 Absorbance Detector Dionex LC25 Cromatograph Oven Bottle trays This system has been removed from the lab while in good working condition, it was well serviced and is still in very good condition. Ljdpfx Asxzhm Sem Nsaa Equipment can be serviced/renovated/refurbished on request at extra cost.

Condition: used, Year of construction: 1995, functionality: fully functional, machine/vehicle number: TM-2006-31, Old lady but still running good. A lot of new sanding bellts Lodpfjx Swmrsx Am Neaa

Condition: used, Marel M Series 3000 Lasdpfx Amsxtfvhe Nea

Year of construction: 2015, operating hours: 10 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: SN 15101588 SP 082988, Thermo Scientific Dionex ASE 350 Automatic Sample Extractor for High-Performance Extraction of Solid Samples at High Pressure and High Temperature Thermo Scientific Dionex ASE 350 Automatic Sample Extractor is equipped with a carousel for 24 extraction cells with a volume of 1 to 100 ml, a carousel for 60 ml and 250 ml collection containers and a solvent organization module. Additional equipment offered with the extractor: - Extraction cells with a volume of 22 ml – 6 pcs. - Bottles for solvents with a volume of 2 l – 2 pcs. - Bottle connections with caps – 2 pcs. Date of purchase: December 2015 The ASE 350 system is a fast extractor that simplifies work in almost any application requiring extraction from soil, sediments or plant or animal material. Ljdowm Arijpfx Am Neaa 1. The extractor weighs 65 kg. A suitably stable laboratory table must be provided. 2. The ASE 350 extractor is powered by 230 V, 50 Hz. The required fuse is 16 A. 3. Nitrogen with a purity of 99.99% is required to ensure proper operation of the extractor. The reducer should allow the output gas pressure to be set within the range of 1.03-1.38 MPa. 4. Optionally, in addition to nitrogen, air can be used to control the pneumatics of the device. The air should be 99.99% pure. The air source should allow the output gas pressure to be adjusted within the range of 0.4 MPa to 0.8 MPa. NOTE: AIR DOES NOT SUBSTITUTE FOR NITROGEN, WHICH IS NECESSARY, AIR CAN BE REPLACED WITH NITROGEN. 5. Dimensions: 750 x 600 x 700 mm (width x depth x height).

Condition: ready for operation (used), The Thermo Scientific Dionex ICS-Series VWD is a highly advanced variable wavelength detector designed to provide accurate and precise detection of analytes in complex samples. It is a vital component of the Dionex ICS-Series chromatography system and is used for a wide range of applications, including pharmaceutical research and development, environmental monitoring, food and beverage testing, and more. The detector is equipped with a state-of-the-art flow cell design that ensures excellent signal-to-noise ratios, providing exceptional sensitivity and selectivity for even the most challenging separations. The flow cell is also designed to minimize dispersion and band broadening, ensuring high resolution and accurate peak detection. Lsdpfx Asxnm Rvom Noaa The Thermo Scientific Dionex ICS-Series VWD Detector features a variable wavelength range of 190 to 900 nm, which enables it to detect a broad range of analytes. It also has high-speed scanning capabilities, enabling rapid data acquisition and analysis, making it ideal for high-throughput applications. Good working condition. Please check out our other listings as well.

Condition: excellent (used), functionality: fully functional, We offer a highly productive 3D printer for industrial series production. Trumpf TruPrint 3000 G02 with the options Zirox Sensor, Single Laser, and Powder Bed Monitoring. Trumpf TruPrint 3000 including filter system. Serial number: S0721Q0022 Laser performance: Laser beam on 17,508 hours. The system was finally used with aluminum AlSi10MG. The 3D printer has already been disassembled by the manufacturer. Disassembly and functional reports are available, proving that the machine was in operation before disassembly. All axes are properly secured. The machine can be transported on a standard truck. Accessories: 4 dosing containers 1 construction cylinder Lodpfx Amjvu Tico Nsaa 1 overflow container Various spare parts such as protective glass, etc. Manuals The Armanni CAR.Elev pallet truck. A container changer is also in stock and can be offered as an option. Fast to high-quality 3D components D1. Machine concept The TruPrint 3000 is a universal medium-format machine with external parts and powder management for the industrial production of complex metal components using 3D printing. Its large build volume offers high flexibility in terms of the size, quantity, and geometry of the respective application. Technical specifications TruPrint 3000 Build volume (cylinder) mm x mm Ø 300 x H 400 Processable materials5 - Weldable metals in powder form, such as: stainless steels, tool steels, aluminum, nickel-based, cobalt-chromium, copper, titanium, or precious metal alloys. Build rate 6 cm3/h 5 - 60 Layer thickness 7 μm 20 - 150 Laser source (TRUMPF fiber laser) W 500 Beam diameter μm 100 - 500 O2 concentration ppm 100 Exposure speed (powder bed) m/s 3 Monitoring - Condition monitoring, performance monitoring. Option: Powder bed monitoring. Preheating (substrate plate) °C 200 Shielding gas - Nitrogen, argon Power supply V / A / Hz 400 - 32 - 50/60 Dimensions (incl. filter) mm 3385 x 1435 x 2225 Weight (incl. filter) kg 4300 Subject to change. The information in our offer and order confirmation is authoritative. Technical data TruPrint 3000 Table 3

Condition: excellent (used), approx. 3000 m² steel construction platform 2-storey used, good condition, see pictures Manufacturer STOW Length approx. 58,5 m Width approx. 54,6 m Lajdpfxod S S E Ue Am Nja height lower edge 3,4 m Height upper edge 3,7 m Load 500 kg/m² C-profiles and sigma-profile construction fixed with screws and nut Grid spacing adjustable in length floor structure is 38 mm chipboard, highly compressed, tongue and groove underside white, upper side grey coated Negotiated price: Offer on request! Partial sale possible! Dismantled and loaded Goods are in stock. Transport costs are available on request. Visits possible at any time by appointment. Further information on request. Constantly over 5000 running meters of pallet racking from numerous manufacturers in stock. (Changes and errors in the technical data, information and prices and subject to prior sale! See our AGB, all prices excl. VAT from stock) Purchase / Sale We are constantly looking for and offering numerous articles from various areas clean-swept premises Liquidations Fast - flexible - ready to hit! We also clear and - or dispose for liquidators. Write to us with a few keywords and we will contact you immediately. To get to our site, please click on our logo!

Year of construction: 2022, condition: as good as new (ex-display), functionality: fully functional, For sale is a FTIR spectrometer - NICOLET IS20 MID-IR DTGS spectrometer which was used for one year as part of a research project. Operation in laboratory environment; no damage; Scope of sale: 1x NICOLET IS20 MID-IR DTGS spectrometer 1x IS20 German device labeling 1x European Schuko plug, 250V Laedpfx Aerklx Ism Noa 1x ATR ITX BASE 1x AR diamond crystal for Smart iTX ATR 1x COMP-U-16 Upgrade from monitor 20" to monitor 24" 1x iS10-iS20 TRANSMISSION ACCESSORY 1x ST JAPAN ATR-FTIR POLYMER BUNDLE 1x DELL OPTIPLEX 3090 MT - I3-10105 8GB NP: € 31.998.,77 Sale EXW, tel que

Condition: used, Year of construction: 2012, Control Siemens 840 D Laedjxh Rqtopfx Am Nja weight of the machine ca. 13,5 t dimensions of the machine ca. 7m x 4m x 2,75m m Accessories: Coolant tank Grinding wheels Various spare parts Operating and maintenance instructions CE conformity Dimensions: 7x4x2.75 m ( LxWxH) TECHNICAL DATA: Workpiece data: max. outer diameter: 250 mm with max. grinding wheels Ø 450 mm max. diameter to be machined over table: 375 mm Profile depth for dressable grinding wheels: 40 mm max. workpiece length: 3,600 mm max. distance between centers (1): 2,800 mm max. bevel angle: +/- 90° Number of teeth of the workpiece: 1 - 999 max. weight of the workpiece: 250 kg Working area: Center distance between workpiece and tool spindle: 355-170 mm Radial travel: 185 mm Axial travel: 3,000 mm Swivel angle: +/- 90°

Condition: good (used), CSF Fryer Model BRN 3000 / 500 Laedpfxoxr Rugs Am Nja Terminal fluid heating system In everyday use

Condition: like new (used), Year of construction: 2009, operating hours: 20,929 h, functionality: fully functional, machine/vehicle number: 23500, travel distance X-axis: 3,320 mm, travel distance Y-axis: 760 mm, travel distance Z-axis: 760 mm, feed rate X-axis: 24 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, controller model: Heidenhain, table width: 3,400 mm, table length: 700 mm, spindle speed (min.): 10,000 rpm, spindle speed (max.): 24,000 rpm, operating hours of spindle: 20,929 h, input voltage: 230 V, We are selling the machine because we need to free up space in the factory. Lsdpfx Aeyt Np Tsm Nsaa CNC Machining Centre TVMC-3000 (L) Table: up to 3400 × 700 mm (maximum load 4,000 kg). Travel X/Y/Z: up to 3320 × 710 × 610 mm. Spindle: BT40 taper, speed up to 14,000 RPM. Automatic tool changer: 24 positions. Rapid traverse: up to 30 m/min. Precision: positioning ±0.005 mm / 300 mm. CNC control available: Heidenhain.

Condition: used, The GEA oil fryer is used for flash or deepfrying coated and uncoated products. It is suitable for meat, fish, poultry, cheese, vegetables, potatoes and vegetarian dishes. all stainless steel electrically heated 72 kW heating capacity 75 kW total connected power net frying length : ± 3.000 mm Lsdpfxsy Ednie Am Neaa net belt width : ± 500 mm in- and outfeed belt teflon infeed belt adjustable speed sediment removal system filter suitable for fire protection mechanical hoists dimensions (l x w x h) : ± 6.300 x 1.700 x 3.100 mm

Condition: good (used), Year of construction: 2010, functionality: fully functional, turning diameter: 3,600 mm, Table diameter: 3000 mm Max. turning diameter: 3600 mm Max. distance from table to tool holder: 2640 mm Lsdsy Ep Dyepfx Am Noaa Ram cross-section: 240 x 240 mm Ram vertical travel: 1500 mm Slide horizontal travel left/right from table axis: 1930 / 2250 mm (+920 mm for tool change) Cross-slide travel: 1800 mm Table rotation speed: 200 rpm (2-speed gearbox) Main spindle power: 80 kW Feed rate: up to 4000 mm/min Rapid traverse: 10,000 mm/min Max. workpiece weight: 30 tons Tool changer: 45 stations, 20 of which for Capto-C8 holders High-pressure coolant Overall dimensions: 10,570 x 8,445 x 7,375 mm Machine weight: 72,000 kg