Used Thermotron Sm-8-8200 for sale (37,802)

Condition: excellent (used), Here we offer you a Thermotron environmental test chamber. Thermotron environmental test chamber, water-cooled Working area volume: 227 liters Temperature uniformity: All models 0.7°C Fedpozd Snrefx Afuepn Temperature range: -70°C to +180°C Temperature control tolerance: All models 0.3°C Shipping weight: approx. 400 kg Internal dimensions: Width 610 mm x Depth 610 mm x Height 610 mm External dimensions: Width 890 mm x Depth 1240 mm x Height 1850 mm Humidity range: All models 10% to 98% RH Humidity control: All models 2.5% RH Heating time in minutes -65º to 71ºC: 17 Heating time in minutes -65º to 180ºC: 43 Heating time in minutes -40º to 85ºC: 16 Electrical requirements in full load amps 230/3/60: 19 Electrical requirements in full load amps 230/1/60: 25 Electrical requirements in full load amps 220/1/50: 27 Cooling time in minutes 85º to -40ºC: 32 Cooling time in minutes 71º to -65ºC: 54 Cooling time in minutes 180º to -65ºC: 72 Compressor size: (2) -2 Hp Operating voltage: 400V 16.7 A Type: SM-8-8200 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: good (used), Year of construction: 1998, functionality: fully functional, Manufacturer: Heidelberg Model: Speedmaster 102-8-P Year of manufacture: 1998 Prints: 359 million Equipment: - CP Tronic control console - CPC 1-04 color control system - Alcolor dampening system - Autoplate plate changing system Additional features: - Automatic blanket washing system - Autoregister - Electronic double sheet detection - Electronic side guide control - High-pile delivery - Sheet de-curler - Anti-static system - Steel sheets in the feeder and delivery - Super Blue configuration Fpedpfozd R Hgsx Afuon - Technotrans cooling and circulation system - Weko powder spraying device Maximum format: 720 × 1,020 mm Machine type: Sheetfed offset printing press Machine model: 8-color perfecting press

Year of construction: 1991, condition: ready for operation (used), functionality: unexamined, machine/vehicle number: 511 138K, Engine included. Price upon request. Fedpozc Hp Aofx Afujpn

Condition: used, Year of construction: 2006, operating hours: 100,000 h, functionality: fully functional, feed rate X-axis: 30 m/min, workpiece weight (max.): 50 kg, working width: 1,400 mm, suction capacity: 48,000 m³/h, type of input current: three-phase, total height: 2,800 mm, total length: 68,000 mm, total width: 2,600 mm, working height: 75 mm, power: 720 kW (978.93 HP), input frequency: 50 Hz, input current: 1,800 A, operating pressure: 6 bar, workpiece width (max.): 1,250 mm, compressed air connection: 6 bar, complete lacquering line: 2x Heesemann sanders (LSM8 2006.12.141, 3rollers-3pads/ LSM8 2006112.151, 2pads) 2x Heesemann cleaning mach. (EA8 2006.12.142 / EA8 2006.12.152) 1x Cefla hot air drying tunnel (FEV EU2/8 6 IRM / TNSL) 4x UV lamps dryer ( 2lamps, UV 2000 M2+CRU+TN 4000/HT / 4lamps UV 2000 M2+CRU+TN 5000/HT / 2lamps / 4 lamps) 2x stain roller coaters ( Smartcoater M-EVO / model M) 2x heavy putty roller coaters (Smartcoater SP / SP1-EVO) 3x lacuer roller coaters (Smartcoater MF) 10x belt/roller conveyors 2x hydraulic lifters (200-900mm height) Fpodpfxsv Ta Tfs Afuon

Year of construction: 2019, operating hours: 34,933 h, condition: ready for operation (used), machine/vehicle number: NO-19-05-07358/GE1101824, Technical data (German) Manufacturer: EFD Induction a.s. Type: SINAC 50/80 SM Serial number: NO-19-05-07358/GE1101824 Year of manufacture: 21/19 Electrical data: Input voltage: 400-480 V AC Input current: 90 A Mains frequency: 50/60 Hz Input power: 62 kVA Reactive power: 62 kVAr Output data: Output voltage: Not specified Output current: 350 A Output power: 50 kW Frequency range: 10-25 kHz Cooling & operating conditions: Water consumption: 21 l/min Maximum inlet temperature: 35°C Maximum pressure: 6 bar Min. pressure difference inlet/outlet: 4.5 bar Fedpfx Afevw S Rwjujpn Ambient temperature (operation): +5°C to +50°C Protection class (IP): IP54

Condition: used, Year of construction: 2012, operating hours: 60,000 h, functionality: fully functional, feed rate X-axis: 12 m/min, workpiece weight (max.): 50 kg, working width: 1,350 mm, total length: 62,000 mm, total height: 2,800 mm, total width: 3,200 mm, type of input current: AC, working height: 120 mm, input voltage: 400 V, suction capacity: 36,000 m³/h, input current: 800 A, input frequency: 50 Hz, power: 440 kW (598.23 HP), compressed air connection: 6 bar, complete lacquering line: Fedpfsv T Ttxjx Afujpn 1x Heesemann sander (LSM 8, 2006.10.251, 2006, 2x roller / 2x pads, ) 1x Safo brushing machne (2006, DCSF 135 2W) 1x Cefla lacquering spray Cabin (2012, Roctre D/HS) 3x Cefla hot air drying tunnel (2012, Aquadry LA ) 1x Cefla cold air drying tunnel (2012, Aquadry RLA) 1x UV lamp dryer ( 3lamps, UV-R SPM3/2500s) 2x hydraulic lifters (200-900mm height)

Condition: new, Year of construction: 2023, Cut-to-length slitting machine is used for longitudinal cutting of the metal sheets with maximum thickness 1mm, aluminum composite panels, paper, polycarbonate thanks to special cutting knives that are fixed on rolls of the slitting machine. Cut-to-length slitting machine SM 1250x8 lets you to cut the material into eight strips. The diameter of the rolls is 56 mm There are types of the sheet metal cut-to-length machines we produce: -Electric cut-to-length slitting machine SM 1250x4 (cutting for 3-4 strips) Fpodpfxef Epzgj Afuon -Electric cut-to-length slitting machine SM 1250x8 (cutting for 6-10 strips) -Electric cut-to-length slitting machine SM 1250x12, SM 1250x20 (cutting for 12-20 strips) The operator of cut-to-length slitting machine can easily change the width of the strips and their numbers. There are special screws on the knives to do it. You can easily cut sheet metal right from the decoiler with our cut-to-length slitting machine. Cut-to-length slitting machine could be equipped with cross cutting knife. The machine has strong base to avoid deformation while cutting and lets to cut metal into 8 strips with the perfect quality. The cutting speed of the slitting machine is about 10 meters/minute. Cut-to-length slitting machine is electric so it doesn’t need any air or oil system to work. Electric consumption is 1.5 kW/hour. The voltage is 380V. It could be used in environment with temperature from -10 to +45 Celsius degrees. Our enterprise has started to produce this kind of cut-to-length slitting machine (slitter) since 2008 so we have great experience in doing our job and can propose great solution to your business. To get more information about the price of this slitting machine and the way it could be delivered to your location just contact us. We will give you all the information you may need. Dimension: 170.00Sm x 120.00Sm x 100.00Sm Weight: 250.00Kg Engine: 1.1-1.5 kW

Condition: like new (used), Year of construction: 2023, Technical data: Double bending machine Working length: 8200 mm Bending capacity: 2.5 mm CNC control Sheet metal cutting device Back gauge depth: 1250 mm Bending accuracy: +/- 0.5° Bending range: 140° Multi-zone crowning system Bending die width: 10/20 mm Fpedszz Adfspfx Afusn Number of gripper fingers: 9 pcs. CE marking Dimensions (length x width x height): approx. 10200 x 2300 x 2150 mm Weight: approx. 12.5 tons Accessories: Sheet metal cutting device Hydraulic unit with oil cooler Bending die lighting Various tools The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty. Condition: overall in new condition

Condition: used, Year of construction: 1993, functionality: fully functional, Kaeser SK 26 Rated output: 15 kW Permissible operating overpressure: 10 bar Fodpfx Aewn H Hyofujpn Year: 1993 Kaeser SM 8 Rated output: 5.5 kW Permissible operating overpressure: 10 bar Year: 1986 Compressed air tank Kaeser Capacity: 500L Permissible operating overpressure: 11 bar Year: 1992 Refrigeration dryer OM Rated output: 0.8 kW Capacity: 3000 l/min. Permissible operating overpressure: 16 bar Year: 2013

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 505004, total width: 970 mm, total length: 680 mm, total height: 700 mm, empty load weight: 250 kg, input voltage: 380 V, Manufactured: 08/2005 Power: 0.55 kW Power supply: 220/380 V three-phase 50 Hz Dough weight: 50 to 1200 g Production: 1200 pieces/hour External casing made of stainless steel Mechanical side adjustments Forming belts Output receiving table Emergency stop on the front panel Dimensions: 970x680x700 mm Weight: 250 kg Used SINMAG SM-380S dough sheeter The used SINMAG SM-380S dough sheeter is designed for professional dough shaping in bakeries. This unit, manufactured in August 2005, features a 3-cylinder system, mechanical adjustments, and felt conveyor belts. Its nameplate indicates a power of 0.55 kW and a 220/380 V three-phase 50 Hz power supply. The specific data for this machine is distinguished below from the characteristics derived from the European documentation for the range. Why this SINMAG SM-380S stands out The operation is based on the progressive rolling of the dough and then its elongation. The mechanical controls allow adjusting the passage through the cylinders according to the desired result. The documentation for this generation specifies that the right handle adjusts the spacing of the front cylinders, while the left handle adjusts the inclined cylinders to adapt the final length. This design allows bakers to work with different dough weights without complex electronic programming. The European documentation associated with this version states a range of 50 to 1,200 g and a shaping width of 750 mm. Key advantages 3 cylinders for rolling and shaping Fpedpfxjz Eht Do Afuon Mechanical adjustments for rolling and length Felt conveyor belts Stainless steel construction, as documented for the SM-380S version Extendable receiving table Emergency stop present on this unit Wide range of documented dough weights Detailed technical specifications

Year of construction: 2008, condition: used, Asparagus peeling machine with eight stations The Hepro Schäl-Automat HSM-180/SAP peels asparagus automatically. Spears are loaded and carried past the peeling heads, which remove the skin evenly. The machine has eight stations that can be switched on or off individually; peeled spears come out onto the side table. The rating plate shows it was built in 2008 by Hepro GmbH in Delbrück (Germany), supply 400 V, 50 Hz, 3 phase, 0.5 kW. The machine stands on castors. Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Fodpfx Afez Nc Tyoujpn Type: Asparagus peeler (Schäl-Automat) Stations: 8, each switchable Power supply: 400 V, 50 Hz, 3 phase, 0.5 kW Construction: Stainless steel, on castors

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, feed length X-axis: 2,000 mm, feed length Y-axis: 900 mm, feed length Z-axis: 800 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, total height: 3,130 mm, total width: 3,680 mm, total length: 5,350 mm, table width: 800 mm, table length: 2,000 mm, table height: 500 mm, position of the milling head: souvisle řízená ve 2 osách, type of input current: three-phase, rotational speed (max.): 4,000 rpm, rotational speed (min.): 20 rpm, table load: 3,000 kg, overall weight: 9,000 kg, workpiece weight (max.): 3,000 kg, Equipment: rotational speed infinitely variable, FSGQ 80 SM/A2 CNC - TOS KUŘIM Bed-Type Milling Machine, Table Length 2m Control System: Heidenhain TNC 530 Availability: In stock FSGQ 80 SM/A2 CNC – Technical Specifications: Basic Machine Data: Manufacturer: TOS Kuřim Overall length: 5,350 mm Overall width: 3,680 mm Overall height: 3,130 mm Total weight: 9,000 kg Total power requirement: 35 kVA Working Range: Longitudinal travel, X axis: 2,000 mm Transverse travel, Y axis: 900 mm Vertical travel, Z axis: 800 mm Spindle Head (Head S): Spindle taper: HSK-A 63 Max. power: 19.3 kW Speed range: 20 – 4,000 rpm Number of speed stages: stepless Machining: stepless in 2 axes Feed Range X – Y / Z: Number of stages / range: stepless / 5 – 20,000 mm.min-1 Table: Table size: 800 x 2,000 mm Max. table load: 3,000 kg Tool Changer: Number of tools: 24 Low-pressure tool cooling: 4 bar High-pressure cooling: 20 bar Control system: Fsdpoxp Iyujfx Afuspn Heidenhain TNC 530 Further details upon request.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1985, machine/vehicle number: 8444-08, workpiece length (max.): 6,000 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum edge length: 6,000 mm Maximum material thickness: 1.25 mm Mechanical cutting device Hydraulic unit Flow rate of gear pump: 14.5 l/min Operating pressure: 140 bar Maximum pressure: 210 bar Electric motor power: 3 kW Fsdpfx Afjzy Ndcoujpn Motor speed: 1,450 rpm Voltage: 380 V Frequency: 50 Hz Oil tank capacity: 30 l Pressure gauge diameter: 63 mm Pressure gauge display range: 0–250 bar Pressure switch: 90 bar Hydraulic components Gear pump CPL 9 DQ Intermediate flange L25-2/004 Elastic coupling G 228/2P Return filter Fill and vent filter Oil level indicator Drain plug Glycerine pressure gauge Valve block with pressure, flow control, braking, and solenoid valves Hydraulic cylinders Number of hydraulic cylinders: 8 Type: GHZ-50 × 225-S spec. Piston rod with external thread M20 Length: 20 mm Swivel bearing at the rear Hydraulic motors Number of hydraulic motors: 4 Type: OMP 50 MACHINE DETAILS Control system Electrical machine control with operator panel (OP) Adjustable dwell times, angle ranges, and shutdown delays Variant control for different machine functions EPROM-based control Electrical supply Mains voltage: 380 V Frequency: 50 Hz EQUIPMENT Hydraulic unit OP-14 SM 8 hydraulic cylinders GHZ-50 × 225-S spec. 4 hydraulic motors OMP 50 Gear pump CPL 9 DQ Valve block with hydraulic valves Return filter Fill and vent filter Oil level indicator Glycerine pressure gauge Pressure switch Electrical OP control Hydraulic and electrical circuit diagrams

Condition: good (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: PL031303405S, For sale is a single unit consisting of a textile carousel with a matching conveyor dryer: M&R Sportsman EX 8/6 textile carousel, built in 2013 Total print count: 1,168,378 Diameter: 386 cm Weight: 1,497 kg Power supply: 380 V Pallets: Textile - 40 x 55 cm, 8 pieces Pockets - 30 x 40 cm, 8 pieces Sleeves - 15/12 x 40 cm, 8 pieces Squeegees: 6 x flood and 6 x pressure squeegees Screen fit with TRI-LOC M&R Radicure D 36/6-3 conveyor dryer, built in 2012 Fedev Iy H Iopfx Afuspn Conveyor width: 91 cm Drying channel length: 183 cm Total width: 127 cm Total length: 305cm Weight: 817kg Power supply: 380V Price negotiable

Condition: good (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 2005.09 261, overall weight: 12,500 kg, power: 180 kW (244.73 HP), input frequency: 50 Hz, input current: 350 A, input voltage: 400 V, Working machine. Fpedjzu I Ehjpfx Afuen Planned dismantlig 2026-12 no manual or documents.

Condition: excellent (used), Year of construction: 2011, Mobile Trommel Screening Plant DOPPSTADT SM 518 Profi Fpjdpfjzwpcyox Afujn Screening drum length: 4.70 m Screening drum diameter: 1.80 m Screening drum aperture: as per agreement Folding side discharge conveyor, length = 5 m Folding rear discharge conveyor, length = 5 m

Condition: used, Thermotron AST-18 HALT/HASS Test Chamber Manufacturer: Thermotron Industries Model: AST-18 Controller: AST-8800 Machine Type: HALT/HASS Test Chamber / Accelerated Stress Test System For sale is a Thermotron AST-18 HALT/HASS test system for combined temperature and repetitive shock/vibration testing. The system enables accelerated stress testing of components and assemblies through extreme temperature changes in combination with multi-axis vibration excitation. Operation and monitoring are performed via the Thermotron AST-8800 controller. Technical Data: Temperature Range: -100 to +200 °C Temperature Change Rate: >50 °C/min at the test specimen Vibration Frequency: 0 to >10,000 Hz Vibration Axes: 3 linear + 3 rotational / 6 degrees of freedom Max. Payload Test Table: 135 kg Airflow Rate: 1,400 CFM / approx. 2,379 m³/h Grid Dimension: approx. 102 × 102 mm Voltage Supply: 400 V / 3 Ph / 50 Hz Max. Current according to Nameplate: 65.3 A Heating Power according to Nameplate: 20 kW AST-8800 Controller: Windows-based user interface Combined temperature and vibration display PSD / Power Spectral Density Data recording and data storage Vibration alarm and shutdown limits Ethernet / Web access User management Monitoring of operating and maintenance times Test Chamber: W × D × H: approx. 838 × 864 × 762 mm Test Chamber Volume: approx. 0.55 m³ / 550 liters Vibration Table: Fpedpfszyndbex Afuon Manufacturer's table size depending on the configuration: approx. 610 × 610 to 711 × 711 mm Impactors: 4 or 5, depending on the design Dimensions: Move-In Dimensions W × D × H: approx. 2,286 × 1,448 × 2,210 mm Footprint: approx. 2.29 × 1.45 m Equipment: Thermotron AST-8800 controller Repetitive shock/vibration table Temperature test chamber Acceleration sensors Temperature measurement technology Safety and monitoring functions Condition: Used Optical condition as shown in the pictures. Calibration valid until 30.11.2024, currently expired. Scope of Delivery: Thermotron AST-18 HALT/HASS test system AST-8800 controller RS-28 unit Scope of delivery and accessories as shown in the pictures. Shipping Data: Dimensions: approx. 2,286 × 1,448 × 2,210 mm Weight: approx. 1,000 kg (estimated) Shipping via freight forwarder possible. Availability: upon agreement. Subject to changes, errors and prior sale.

Condition: as good as new (ex-display), Year of construction: 2020, For sale is a Stäubli TP80 HE FAST picker, a 4-axis robot manufactured in December 2020. The robot was purchased for a specific project but was never used due to a project change. Therefore, it is unused stock in new condition. Fpjdozk D T Tjpfx Afujn The TP80 HE is a high-speed pick-and-place robot for demanding automation tasks. The HE version (Humid Environment) is specifically designed for use in humid or hygienically sensitive environments and is particularly suitable for applications in the food, pharmaceutical, and packaging industries. If you are interested, we will gladly provide you with further information, photos, or the serial number.

Condition: excellent (used), Year of construction: 1997, Wide belt sanding machine HEESEMANN LSM 8, year of manufacture 1997 Fpodpfx Aexurxfjfujn

Year of construction: 2018, condition: used, Clamping force: 900kN, screw diameter: 30mm, L/D ratio: 22, specific injection pressure: 1540bar, calculated shot volume: 88.4cm³, max. shot weight (PS): 80.4g, tie-bar spacing (H×V): 470mm/420mm, min. mold height: 225mm, max. platen distance: 700mm, opening stroke: 475mm, ejector stroke: 150mm, ejector force: 41.2kN, control system: UNILOG B8, weight: 4200kg. Documentation available. An on-site inspection is possible. Fpedpfxsz Hn Spj Afuen

Condition: excellent (used), machine/vehicle number: 00 06 028/00 0026 S, functionality: fully functional, Desiccant air dryer Manufacturer: Motan Type: Luxor LA/8-200 Connection power: 6 kW Dry air flow rate: 200 m3/h Silos for granules: 1 x 150 L 4 x 60 L Fodpfx Afeyvfkrsujpn Material conveying equipment: Manufacturer: Motan Type: HLX-06-1-A000-0 5 units PRICE REDUCTION FROM 7500 TO 6750 EUR!!!

Condition: excellent (used), Year of construction: 1998, HIRON FZ 18 S MAGNUM HIGH SPEED – 1998 – after a major factory overhaul by CHIRON For sale: a vertical CNC machining center, CHIRON FZ 18 S MAGNUM High Speed, manufactured in 1998. The machine is equipped with a Siemens SINUMERIK control system, an automatic tool changer, and a high-speed spindle designed for efficient and precise machining. It also features an oil mist extraction system with a filter, plus air conditioning for the control system. The most important advantage of the offered machine is the major inspection and overhaul carried out by CHIRON in 2020. As part of the work, key machine components were replaced, including: spindle, control computer, pumps, systems, and other components included in the modernization program. Complete service documentation is available, confirming the scope of the overhaul. Technical specifications: Manufacturer: CHIRON Fsdezdklpjpfx Afuopn Model: FZ 18 S MAGNUM High Speed Year of manufacture: 1998 Control system: Siemens SINUMERIK Machine number: 493-01 Weight: approx. 7,990 kg Power supply: 400 V Connected power: 27 kVA Automatic tool changer Vertical CNC machining center The machine is complete and ready for further operation. Thanks to the major overhaul performed by the manufacturer, it represents an attractive alternative to much more expensive, newer machining centers. Complete CHIRON overhaul documentation from 2020 is available. Inspection and verification of the machine's condition on-site are possible.

Condition: used, Year of construction: 1999, Offset 8 color with perfecting Heidelberg SM74-8-P-H Year: 1999 Number of impressions (mio): 247 Fodpfxezdcx Aj Afuopn Machine control - CP 2000 Feeder - Preset feeder - Suction feeder table - Double sheet control - Steel plate in feeder Printing units - Number of printing unit(s): 8 - Machine with perfecting: 8/0, 4/4 - AutoPlate - Alcolor dampening - Automatic inking roller washing device - Automatic blanket washing device - Automatic impression cylinder washing device - Dampening cooling and circulation system: Technotrans Delivery - Standard delivery - Powder spray

Condition: good (used), Year of construction: 2006, operating hours: 9,911 h, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 310 mm, rapid traverse X-axis: 75 m/min, rapid traverse Y-axis: 75 m/min, rapid traverse Z-axis: 75 m/min, nominal power (apparent): 17 kVA, total height: 2,300 mm, total length: 1,500 mm, total width: 2,600 mm, overall weight: 3,400 kg, spindle speed (max.): 30,000 rpm, spindle nose: HSK40, number of slots in tool magazine: 40, input voltage: 400 V, Equipment: documentation/manual, CNC machining center CHIRON FZ08 KS Magnum High Speed Plus (HSP) TECHNICAL CHARACTERISTICS: Year of manufacturing: 2006 CNC control : FANUC 18i-MB5 Number of axes : 7 Stroke X axis : 450 [mm] Stroke Y axis : 270 [mm] Stroke Z axis : 310 [mm] Traversing feeds X, Y and Z axes : 75000 [mm/min] Max. bar diameter in turning spindle : 32 [mm] Main spindle max. speed : 8000 [rpm] Main spindle max. power : 12 [kW] Angular A axis stroke : 360 [°] A axis indexing precision : 0.001 [°] B axis swivelling stroke : -20° / +115 [°] B axis indexing precision : 0.001 [°] Spindle type : HSK40 Max. spindle speed : 30000 [rpm] Tool changer magazin number of stations : 40 Part turnaround by robot (6th side machining) : Yes RS232 Interface : Yes Total power required : 17 [kVA] Supply voltage : 400 [V] Number of running hours : 9911 [h] Dimensions : 1500 x 2600 x 2300 [mm] Weight : 3400 [Kg] EQUIPMENT INCLUDED: x1 RENISHAW TS27R tool probe x1 spindle cooling unit x1 parts catcher x1 coolant tank x1 unit for 6th face machining (gripping system not included) x29 tool holders type HSK40 BIG KAISER x10 collets type F37 SCHAUBLIN x1 washing gun x1 3-color status light x1 maintenance manual x1 electrical diagrams manual x1 operator's manual x1 programming manual Price on request, loading on truck included. Fsdpsx Iiw Iefx Afuopn Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed Machine similar to brands such as Okamoto, ELB, GER, Tacchella, Karstens, Jones & Shipman, Jung, Favretto, Blohm. Internal and external grinding (ID/OD) also to be considered. Surface grinder, lathe, machining center, milling machine.

Condition: refurbished (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 025, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: Heidenhain, controller model: iTNC530, total height: 2,800 mm, total length: 3,000 mm, total width: 2,500 mm, table width: 600 mm, table length: 800 mm, table load: 800 kg, overall weight: 9,500 kg, spindle speed (max.): 36,000 rpm, operating hours of spindle: 9 h, spindle nose: HSK 50E, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, type of input current: AC, Equipment: chip conveyor, documentation/manual, For sale is a used high-speed machining center from the manufacturer MIKRON. High-precision CNC machining center from Mikron / GF AgieCharmilles, designed for demanding HSC machining in toolmaking, graphite and electrode machining, as well as for flexible series production. Additionally equipped with APS (Advanced Process System) and ITC (Intelligent Thermal Control) for maximum process reliability and thermal stability. At “Der Spindel Doctor”, a Step-Tec spindle (a key component of the machining center) was professionally overhauled (report and invoice included) and put back into operation after balancing and inspection. The machine will be completely set up and tested according to the Mikron protocol. During the machine inspection, many wear parts were replaced: X-axis encoder and scale, pneumatic cylinders on the tool changer, tool holders, pneumatic maintenance unit, pneumatic hoses, MMS hoses, water hoses, etc. Fpodpfoz Dx Shjx Afuen The machine is energized and can be inspected and tested. By arrangement, the machine can be put into operation at your location. Accessories: 4-position pallet changer II Table chuck Preparation for PS 32.00 measuring probe Mobile handwheel Blum laser tool measurement system Spindle cooling unit Minimum quantity lubrication - Unilub Oil mist extraction Optical operating mode indicator Air nozzle on the spindle slide Chip conveyor (including coolant tank) General overhaul of the spindle