Used Thieme 3020 L (948) for sale (63,913)

Condition: repair required (used), Manufacturer: Thieme Model: 3020 L Table size: 100 x 130 cm Iiodpfjx H Rybjx Amgeh Electrical inspection required!

Condition: used, Year of construction: 2004, functionality: fully functional, input voltage: 400 V, compressed air connection: 6 bar, year of last overhaul: 2026, overall weight: 3,500 kg, input frequency: 50 Hz, Equipment: documentation/manual, Hello, we are offering a Thieme 3000 SL screen printing machine that has been completely and thoroughly overhauled in our workshop. Iisdpfxjzyc Rio Amgsh The maximum printing format of this 3/4 automatic machine is 4000 mm x 1500 mm! The machine features a large, very robust vacuum table (with two vacuum pumps) on which the printing material is positioned against stops. After the printing process, the material is picked up by a gripper and placed onto an underlying conveyor belt. The conveyor belt can be mounted on either the left or right side, depending on the local conditions. The system has the patented Thieme squeegee system with three printing cylinders and two flood cylinders. Control is via a Mitsubishi E600 display. The system was completely disassembled and reassembled in our workshop. All wear parts and maintenance parts have been replaced. The control cabinet has been powder-coated. The side panels have been replaced with robust HPL panels. All air hoses have been replaced, contactors have been reconditioned, bearing bushings have been replaced, etc. The system is assembled and located in our warehouse in 93476 Blaibach and can be viewed/tested there while powered and connected to an air supply. We can gladly handle transport and on-site assembly. If you have any questions, please do not hesitate to contact us.

Condition: used, Year of construction: 2009, printing size 75x105cm, parallel lift, moving printing bed, with gripper system and belt delivery to the right, infinitely adjustable squeegee stroke, with pneumatic squeegee pressure control, screen frame insertion from the front, with pneumatic squeegee clamping, control panel with keyboard (useable on the left or on the right side), max. sheet size: 78x108cm, max. screen frame size: 120x140cm, additional with cleaning unit model TEKNEK, completely with 3sets squeegees and floodbars, connection: 380/400V, 50Hz, compressed air 6bar necessary. Used, year of construction: 2009, will partly be overhauled and will then be technically and optically in mint condition. Iodpeyu Tu Aofx Amgeih

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, load capacity: 360 kg, arm reach: 2,830 mm, controller manufacturer: KUKA, controller model: KRC4, The most popular robot series from KUKA, the KR 360 R2830 is sturdy, sleek, versatile, and outfitted with high performance features. The KUKA KR 360 R2830 robot has a repeatability of 0.05 mm. Frequently used in the following applications: - Palletizing -Depalletizing -Material Handling -Additive Manufacturing -Assembly -Dispensing -Remote TCP. Model: KRC4 KR360 R2830 Condition: Used & Tested Year: 2016 Iijdpfx Aszl Sgkjmgeh Controller Cabinet: KRC4 Included: Manipulator + KRC4 Control Cabin + All Wire Sets + Teach Pendant PLC MERKEZI Refurbishment Services Include with additional cost: • Cleaning: The surface of the robot panel and the robot has been cleaned. • Oil Changing: The oils of all axes (6 axes) of the robot have been replaced. • Battery Changing: All batteries have been replaced with the new ones. • Mechanical Maintenance: Gear wheels counter balance are checked and maintained after weight, repeatability tests. • Electronical Maintenance: Includes drivers, electronic boards, teach pendant and PC maintenance. • Polishing and Repainting: After the cleaning the robot gets polished and be painted to its original colour, can be painted to the colour that you desired. As PLC Merkezi EOOD, we have more than 400 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands. We also offer custom engineering services and design for your specific production needs.

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, overall weight: 1,660 kg, load capacity: 360 kg, arm reach: 2,826 mm, controller manufacturer: KUKA, controller model: KRC4, teach pendant model: KRCP4, The machine has been completely overhauled (cleaning, oil change, mechanical maintenance, repeatability and load tests)! TECHNICAL DETAILS Payload capacity: 360 kg Arm reach: 2,826 mm Positional repeatability (ISO 9283): ±0.08 mm Number of axes: 6 Maximum additional load Rotating column: 550 kg Link arm: 130 kg Arm: 150 kg Range of motion A1: ±185° A2: –130° / +5° A3: –110° / +162° A4: ±350° A5: ±120° A6: ±350° Axis speeds (rated load) Iodpfxoydbx Ie Amgjih A1: 103°/s A2: 94°/s A3: 100°/s A4: 117°/s A5: 110°/s A6: 163°/s MACHINE DETAILS Controller model: KRC4 Dimensions & Weight Footprint: 968 × 944 mm Robot weight: approx. 1,660 kg Model: KRC4 KR360 Condition: Used Year: 2016 Controller Cabinet: KRC4 Included: Manipulator + KRC4 Control Cabin + All Wire Sets + Teach Pendant As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands. We also offer custom engineering services and design for your specific production needs.

Condition: ready for operation (used), Year of construction: 2016, machine/vehicle number: 306533, functionality: fully functional, cutting height (max.): 350 mm, cutting width (max.): 610 mm, overall weight: 550 kg, saw band length: 4,700 mm, TECHNICAL DETAILS Saw band length: 4,700 mm Tool dimensions: 13 × 0.65 × 24 TPI Guide roller diameter: 630 mm Cutting height: 350 mm Cutting width without rip fence: approx. 610 mm Ijdpsz Im Skofx Amgsih Cutting width with rip fence: 150 mm Loading height: 1,065 mm Cutting speed: 10–100 m/min Table travel: approx. 600 mm Table feed rate: 0.03–0.3 m/min MACHINE DETAILS Dust extraction connection diameter: 1 × Ø 120 mm + 1 × Ø 100 mm Required flow velocity: min. 25 m/s Required volume flow: 1,725 m³/h Operating voltage: 400 V / 50 Hz Type of current: 3 × 400 V Fuse rating: max. 16 A Minimum conductor cross-section: 1.5 mm² Motor power: 0.75 kW Dimensions & Weight Dimensions (L x W x H): approx. 1,850 x 1,200 x 2,300 mm Machine weight: approx. 550 kg

Condition: used, machine/vehicle number: 007649, Max working width: 600 mm Ijdpfx Aju Eviqomgsih Gluing System: EVA Hotmelt

Condition: used, Year of construction: 1998, Format: 520 x 740 mm Equipment: 4 Colors Offset press + Coater axial, circumferential diagonal remote control SAPC - Semi-automatic plate change Komorimatic damping All wash-up device automatic PQC: console for ink, Chromed Cylinders Iedpfx Amox R Dk Uogoih Water temperature controller AEC The press comes with a significant spare part package.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, load capacity: 240 kg, arm reach: 3,330 mm, controller manufacturer: KUKA, controller model: KRC4, teach pendant model: KCP4, The KUKA KR 360 R2830 prime is a 6-axis robotic arm with a payload capacity of 360 kg and a maximum reach of 2830 mm. It is commonly used in industrial applications such as palletizing. Payload: 360 kg Maximum reach: 2830 mm Mounting position: Floor Position repeatability (ISO 9283): 0.06 mm Controller: KR C4 Number of axes: 6 Condition: Used & Tested Shipment does not include the price. Iiodpfxoywrtkj Amgsh As PLC Merkezi EOOD, we have more than 500 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands. We also offer custom engineering services and design for your specific production needs.

Condition: good (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 32-00-0153-5 / 32-00-0114, type of input current: AC, total height: 2,622 mm, total width: 1,911 mm, total length: 3,764 mm, overall weight: 1,150 kg, input frequency: 50 Hz, operating pressure: 6 bar, Equipment: documentation/manual, 2x ETT Packaging Technology Tray Erectors (Cardboard Tray Erectors) – TF 30 L (2014) + TF2 (2020) – including complete documentation For sale are two used, high-quality tray erectors from the renowned German manufacturer ETT Packaging Technology (Made in Germany). Both machines come from a company liquidation, have been dismantled, and properly disassembled. They are in good, functional condition (only dusty) and come with complete documentation (layout, CE declaration of conformity, parts lists, electrical diagrams, operating manual, etc.). All format tools are available. Machine 1: Tray Erector TF 30 L • Machine No.: 32-00-0114 • Year of manufacture: 2014 • Weight: 2,600 kg • Power: 15 kVA • Connection: 3x400 V/N/PE 50 Hz • Air consumption: 30 NL/min at 6 bar • Dimensions (L x W x H): 3,677 x 1,603 x 2,408 mm Negotiable net price: €25,000 Processable formats (Fefco 0453, hot glue): 1. 292 × 187 × 218 mm – approx. 25 pieces/min. 2. 396 × 286 × 241 mm – approx. 23 pieces/min. 3. 592 × 388 × 300 mm – approx. 18 pieces/min. Equipment (excerpt): Iodpfxez R Ucxs Amgsih Control cabinet Rittal, frequency inverter SEW, hot melt gluing device Nordson, control system Siemens S7-300, operating panel Siemens. Machine 2: Tray Erector TF2 • Machine No.: 32-00-0153-5 • Year of manufacture: 2020 • Weight: 1,150 kg • Power: 11 kVA • Connection: 3x400 AC/N/PE 50 Hz • Air consumption: 300 NL/min at 6 bar • Dimensions (L x W x H): 3,764 x 1,911 x 2,621.5 mm Negotiable net price: €35,000 Processable formats (Fefco 0453, hot glue): 1. 320 × 235 × 120 mm – approx. 25 pieces/min. 2. 395 × 290 × 243 mm – approx. 23 pieces/min. 3. 590 × 385 × 309 mm – approx. 18 pieces/min. Equipment (excerpt): Control cabinet Rittal/ETT, frequency inverter SEW, hot melt gluing device Nordson, control system Siemens 1512SP, operating panel Siemens KTP700. Both machines are Made in Germany, with high-quality components (Siemens, Nordson, SEW, Rittal) and are ideal for professional use in end-of-line packaging. Condition: good and functional, only dusty. All format tools are available. The machines have been dismantled and properly disassembled. Terms of sale: Commercial sale. Delivery and collection possible by arrangement. Location: 41564 Kaarst-Holzbüttgen. Upon request, we will gladly send you further documents, detailed layouts, parts lists, and current pictures of the machines. Inspection possible by appointment.

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, L & Z Lathe KAMI DKM 410 L incl. digital display & accessories -UNUSED -CE marking -Digital display for 3 axes -Center height 205mm -Swing over bed 410mm -Swing over cross slide 530mm -Swing over carriage 240mm -Distance between centers 1000mm -Spindle bore 52mm -Speed range (geared) 55 - 2000 rpm -Automatic longitudinal / facing feeds -Threading / Metric / Inch etc. -Tailstock spindle diameter 32 Isdpfoz S Du Sox Amgeih -Tailstock spindle taper MK 4 -Work light -Electric chuck guard -Four-way tool post -Three-jaw chuck 200mm -Four-jaw chuck -Chip guard -Chip drawer -Storage compartments & tools -Faceplate -Documentation Dimensions L x W x H 1.9 x 0.8 x 1.6 meters / Weight 890 KG Errors and omissions excepted.

Condition: new, Year of construction: 2026, Technical specifications: - max. Thickness of cut sheet 1.2mm, Ijdpsda I Ihsfx Amgjih - max. Working width: 3000 mm - in the equipment there is a stop for adjusting the cutting depth and a frame for holding the plate. - the extension table makes it easy to carry large-format metal sheets on the table - measuring table with graduation - robust and compact steel construction - high-quality, durable steel knives - extremely stable and heavy construction of cast iron - ground and hardened plate shear knives - Back gauge system - CE mark - declaration of conformity open design suitable for endless cuts large cast work table engine power 2,2 kW oil HL 46 pressure force 4t working pressure 120-150 bar has hydraulic compensators from the cutter bar up Dimensions: Length: 3500 mm Width: 750 mm Height: 1150 mm Weight: approx. 1000 kg

Condition: new, Year of construction: 2015, functionality: fully functional, controller manufacturer: abb, controller model: abb, Equipment: documentation/manual, New ABB gas analysis cabinets, completely new, AO2020 el3020 and more, 3 units available. For more information, see photos. Each cabinet comes with a pallet of loose parts. Price per cabinet. Isdjyfhwtepfx Amgoih

Condition: like new (used), functionality: fully functional, Year of construction: 2011, machine/vehicle number: OTT-110-015457, operating hours: 12 h, ABUS ELV overhead crane, crane system, bridge crane, hall crane, crane 4 units available!!! 3x manufactured in 2011 (9-14 operating hours) / 1x manufactured in 2016 (50 operating hours) Load capacity / lifting capacity: 3.2t - 3,200KG Track gauge: 9485mm, overall width approx. 9600mm Manufactured in 2011/2016 with floor control Lifting height: 6m Overall height from top of crane to hook approx. 590mm (girder 320mm + lifting mechanism 270mm) Head girder length with buffer approx. 2350mm SWP: only 12.3 full-load operating hours used!!! Remaining service life: 1587.7 full-load operating hours! Crane is disassembled and available immediately. Running rails available upon request. Very good condition - almost like new, inspection certificate available. Column-slewing cranes and wall-slewing cranes are also available. Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000 etc. Shipping via freight forwarder is possible, please inquire with your postal code. Collection preferred. Isdpezund Defx Amgoih

Condition: refurbished (used), functionality: fully functional, Equipment: documentation/manual, Hello, we are offering a Thieme TSC 130 squeegee cutting machine that has been completely overhauled in our workshop. Iodpfjzyc T Rox Amgsih It is suitable for a maximum squeegee length of 1300 mm. In this system, the squeegee blade is trimmed thinly using a very fast-rotating special knife under a water/alcohol mixture. This is necessary if the squeegee blade has not been installed perfectly flat or if the edge of the squeegee blade is damaged and no longer prints cleanly. The advantage of cutting compared to squeegee grinding is: the rubber does not get hot and melt. You always get the same, defined edge, and virtually anyone can do it. The system is suitable for classic screen printing squeegee blades. It is not suitable for RKS squeegee blades or carbon squeegees. The system is currently located in our warehouse/workshop in 93476 Blaibach. We would be happy to take care of transport, etc. If you have any questions, please do not hesitate to contact us.

Condition: reconditioned (used), functionality: fully functional, Manufacturer: Sander Type: Vario Master Model: 9480 Passage height of the pallet: approx. 2200 mm Pallet passage width: max. 1300 mm Iodpfx Amottwpbogjih Bayonet position from the floor: 500 mm Year of manufacture: 1999 Type: Vertical strapping machine Operating voltage: 400 V Power: 2 kW Control voltage: 24 V The machine is installed in our workshop and technically overhauled. We are selling a fully functional machine.

Condition: good (used), mileage: 682,482 km, power: 390 kW (530.25 HP), first registration: 01/2019, fuel type: diesel, axle configuration: 6x2, wheelbase: 6,450 mm, fuel: diesel, color: blue, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro6, total length: 8,900 mm, total width: 2,500 mm, Year of construction: 2019, Equipment: ABS, air conditioning, navigation system, parking heater, trailer coupling, = Additional options and accessories = - Air horn - Air suspension - Aluminum fuel tank - Gullet - Power take-off (PTO) - PTO - Radio/Cassette player - Rear view camera - Refridgerator - Sleeping cabin - Speed limiter - Sun visor = More information = Technical information Number of cylinders: 6 Engine capacity: 12.902 cc Axle configuration Front axle: Tyre profile left: 50%; Tyre profile right: 50% Rear axle 1: Tyre profile left: 50%; Tyre profile right: 50% Rear axle 2: Lift axle; Tyre profile left: 50%; Tyre profile right: 50% Weights Empty weight: 12.385 kg Carrying capacity: 15.615 kg GVW: 28.000 kg Condition Technical condition: good Visual appearance: good Financial information Price: On request Identification Registration number: 43-BLT-6 Iodpfxezub U As Amgsih = Dealer information = We do not charge delivery costs. All trade-ins and financing are possible. Although we take great care in preparing our advertisements, it is possible that some of the options described may or may not be present on the car. Please check before purchasing that all the options described that are important to you are actually present. We are RDW certified. You can opt for an extended warranty; see our website for the packages. All our cars have a clear maintenance history and mileage registration. Our opening hours are: Monday to Friday from 9:00 a.m. to 5:00 p.m. and evenings by appointment. Saturday from 9:00 a.m. to 3:00 p.m. You can find us at: Middelingenseweg 22 5321 JH Hedel The Netherlands And reach us at: Trucks: Passenger cars: Website: Email:

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, total length: 1,265 mm, total width: 1,765 mm, total height: 1,885 mm, control cabinet height: 1,885 mm, control cabinet length: 1,000 mm, control cabinet width: 400 mm, compressed air connection: 6 bar, table load: 500 kg, control voltage: 24 V, workpiece height (max.): 75 mm, grinding wheel diameter: 530 mm, overall weight: 1,800 kg, input frequency: 50 Hz, Equipment: documentation/manual, Very good Peter Wolters AC530 L honing machine. Recently underwent extensive overhaul in 2012. The machine can be operated as a lapping machine or honing machine. Equipped with a good control cabinet, Siemens S7-300 PLC, and Siemens MP 270 HMI. Software backup available. 3.0 kW main drives with 100 RPM. Maximum process pressure 500 daN. Includes Mahr measuring control system with positioning lock and switching points for the load stages. The speeds, process pressures, and dosage can be freely programmed via passwords. The machine has a recipe memory for 60 recipes. Process support for honing functions. The machine is in stock and immediately available. Inspection under power and with compressed air is welcome. Complete documentation in paper form, CE and EN60204-1. Iiedsz Sm R Rspfx Amgjh A reconditioned cooling unit can also be offered for this machine. Furthermore, we can offer a comprehensive range of spare parts.

Condition: reconditioned (used), Year of construction: 2021, operating hours: 402 h, functionality: fully functional, working width: 430 mm, area performance: 1,900 m²/h, overall weight: 190 kg, warranty duration: 12 months, water tank capacity: 30 l, HAKO SCRUBMASTER B30 CL TB430 SCRUBBER NEW 12V 85Ah SIAP GEL BATTERIES (2x) Manufactured in 2021 with 402 hours of operation 430mm cleaning head (TB430) equipped with a new medium-hard disc brush, allowing work on any surface. New polyurethane squeegee rubbers, resistant to contact with oily liquids, grease, and petroleum products. The built-in battery charger and wheel drive simplify daily operation. A new protective rubber around the brush head prevents water from splashing outside the machine's outline. The device is equipped with a new, durable drain hose and a new suction hose. A new suction turbine ensures high water suction power from the squeegee. Each device we offer is individually photographed; you buy exactly what you see. TECHNICAL DATA: Power supply voltage: 24 V Brush working width (mm): 430 Squeegee working width (mm): 760 Theoretical capacity (m²): 1900 Working speed (km/h): 4.5 Tank capacity (l): 30/30 Weight (ready to use): ~190 Power (kW): 1.31 INCLUDED: NEW BATTERIES 12V 85Ah SIAP GEL BATTERY (2x) NEW 24V 400W suction turbine NEW 430mm PPL 0.5 disc brush NEW drain hose NEW suction hose NEW head guard rubber Built-in battery charger Squeegee blade with new oil-resistant rubbers 5L Tenzi Normal fluid - FREE Iiodpfxsx Tp R Eo Amgjh KEY FEATURES: The 30-liter tank allows for a large volume of cleaning solution, eliminating the need to frequently stop for refills. The machine's design makes it highly maneuverable. The small turning radius allows for operation even in narrow passages and alleys. The parabolic squeegee beam ensures precise suction of the solution from the cleaned surface. The large working width (430mm) ensures high surface coverage. The control panel is very clear and intuitive.

Condition: excellent (used), functionality: fully functional, Year of construction: 1991, machine/vehicle number: ROD391, Technical specifications: 1x Demag KBK 1 pillar slewing crane, NL 80KG, with Abus chain hoist, manufactured in 2021 Load capacity at full outreach: 80KG Height: approx. 3.65 m (pillar 3.05 m + pillar extension) UK jib length: approx. 3.1 m Outreach: 5 m Hook height: approx. 2.7 m Total weight: approx. 400KG with 80KG Abus GM chain hoist, manufactured in 2021 including bolts, cable carrier, trolley, end cap, etc. Slewing range: 300°, connection to 400V 16A Crane is dismantled and available immediately Item location is 75053 Gondelsheim Other cranes are available, load capacity 80-5000KG, please inquire Iodpfez Tcv Djx Amgoih See pictures Shipping via freight forwarder or collection only by prior arrangement

Condition: reconditioned (used), Year of construction: 2013, operating hours: 848 h, functionality: fully functional, working width: 430 mm, area performance: 1,900 m²/h, overall weight: 230 kg, warranty duration: 12 months, water tank capacity: 42 l, HAKO HAKOMATIC B45 CL TB430 SCRUBBER NEW 12V 105Ah SIAP GEL BATTERIES (2x) Manufactured in 2013 with only 848 hours on the clock! 430mm cleaning head (TB430) equipped with a new medium-hard disc brush for work on any surface Isdpfx Aozibynomgoih New polyurethane squeegee rubbers, resistant to oil, grease, and petroleum products. The built-in battery charger and wheel drive simplify daily operation. A new protective rubber around the brush head prevents water from splashing outside the machine's outline. The device is equipped with a new, durable drain hose and a new suction hose. A new suction turbine ensures high water suction power from the squeegee. Each device we offer has individually taken photos; you buy exactly what you see. TECHNICAL DATA: Power supply voltage: 24 V Brush working width (mm): 430 Suction nozzle working width (mm): 760 Theoretical capacity (m²): 1900 Brush speed (rpm): 210 Tank capacity (l): 42/42 Machine weight, ready to use (kg): ~228 Power (kW): 1.31 INCLUDED: NEW 12V 105Ah SIAP GEL BATTERIES (2x) NEW 24V 400W suction turbine NEW 430mm PPL 0.5 disc brush NEW suction hose NEW drain hose NEW head guard rubber Squeegee blade with new oil-resistant rubbers Built-in battery charger 5 liters of Tenzi Normal fluid - FREE KEY FEATURES: The 42-liter tank allows for a large volume of cleaning solution, eliminating the need to frequently stop for refills. The machine's design makes it highly maneuverable. A small turning radius allows for operation even in narrow passages and alleys. The parabolic squeegee beam ensures precise suction of the solution from the cleaned surface. The large working width (430mm) ensures high surface coverage. The control panel is very clear and intuitive.

Condition: new, pressure: 320bending length: 3020column width: 2555daylight: 650stroke lenght (max.): 400column throat depth: 450messurements (LxWxH): 3785x2290x3100weight approx.: 14.4504 axes (Y1, Y2, X, R): Ja alle Achsen über die CNC Bombierung Steuerung Esa S630 (2D Grafik Steuerung)CNC crowning system by control: ja über die CNC Bombierung Steuerung Esa S630 (2D Grafik Steuerung)motor power: 30Standard equipment: KK-Industries has the general representation of the DENER Group We have put together a high-quality model for Europe. The CNC press brake KK-Industries made by DENER Model KKI EUROPA XL The strong press brake EUROPA XL with high precision, accuracy universally applicable. Europa XL has a very large installation height and accordingly a long stroke. The projection is also above average in order to limit as little as possible. We focus on quality, which is also reflected in the control system. As standard control we have the high quality DELEM DA 66 T. Also with the CNC axes we have standard Y1, Y2, X and R. Of course, the CNC crowning via the Delem DA 66 T standard. Even with the upper tool and the die we make no compromises and equip the CNC press brake KKI EUROPA XL with quality tools from EUROSTAMP Italy. Of course, every machine is just as good as the service. That's why we put our focus on highly qualified employees with long experience in the CNC sheet metal working area. Iiedpfx Amsd Ehikegsh

Condition: used, Year of construction: 2013, Used machine Year of manufacture: 2013 Iodpjz Rrbwjfx Amgoih 5-axis CNC machining center as a cantilever table design Working area in X = 4375 mm Working area in Y = 1550 mm Working area in Z = 250 mm with 12 kW milling spindle, liquid-cooled 5-axis spindle Homag Drive 5 C+ max. speed 24,000 rpm with torque support Tool holder HSK F-63 18-position disc tool changer 17 drilling spindles, vertical 2 drilling spindles, horizontal in X 2 drilling spindles, horizontal in Y Notch saw, 90° swiveling with LED light strip as positioning aid with 2 vacuum pumps, each 300 m³/h with special workpiece clamping system for small parts with barcode scanner Safety device: bumper with chip conveyor with powerControl PC 85 control system with handheld operating device Software: Homag Woodwop 8.0 WoodScan CollisionControl Space requirement: approx. L x W x H 7650 x 4710 x 2850 mm Availability: approx. July 2027 Location: NRW (North Rhine-Westphalia)

Condition: new, pressure: 220bending length: 3020column width: 2550daylight: 600stroke lenght (max.): 350column throat depth: 450messurements (LxWxH): 3745x2290x3055weight approx.: 11.2504 axes (Y1, Y2, X, R): Ja alle Achsen über die Delem DA 66 (2D Grafik Steuerung)CNC crowning system by control: ja über die CNC Steuerung Delem DA 66 (2D Grafik Steuerung)motor power: 22Standard equipment: KK-Industries has the general representation of the DENER Group We have put together a high-quality model for Europe. The CNC press brake KK-Industries made by DENER Model KKI EUROPA XL The strong press brake EUROPA XL with high precision, accuracy universally applicable. Europa XL has a very large installation height and accordingly a long stroke. The projection is also above average in order to limit as little as possible. We focus on quality, which is also reflected in the control system. As standard control we have the high quality Esa S640. Also with the CNC axes we have standard Y1, Y2, X and R. Of course, the CNC crowning via the Esa S640 standard. Even with the upper tool and the die we make no compromises and equip the CNC press brake KKI EUROPA XL with quality tools from EUROSTAMP Italy. Of course, every machine is just as good as the service. That's why we put our focus on highly qualified employees with long experience in the CNC sheet metal working area. Isdsd Edhljpfx Amgjih

Condition: excellent (used), functionality: fully functional, Kemper spiral mixer, type SP 75 L This Kemper spiral mixer is suitable for a maximum flour capacity of 75 kilograms and is equipped with two automatically switchable timers and two speeds. The mixer also features a stainless steel bowl and mixing spiral and is equipped with a safety guard. In very good condition. Iisdpfxez S T N Sj Amgoh