Used Thyssen Krupp Khp 130 / 125 for sale (7,889)

Condition: good (used), Manufacturer: Thyssen / Krupp Type: KHP 130 /125 Electrical Motor: Included (200 kW) Isdeg I R Rujpfx Abhoba Rotor diameter: 1.300mm Rotor width: 1.250mm Inlet: 1.370 x 990mm See PDF-file below for more detailed information. Included: – Inlet – Hydraulic system to open New spare-parts in stock.

Condition: used, Single-column eccentric press KRUPP, type PEKRD 125 h Machine No. 2861, Year of manufacture 1977 Pressing force: 125 tons Reach: 400 mm Table size: 950 x 750 mm Ram area: 800 x 540 mm Table opening: 100 x 250 mm Stroke adjustment: 8 to 160 mm Ram adjustment: 100 mm Installation height for maximum stroke at the top: max. 550 mm Stroke rate: 60 strokes/min. Table height above floor: 800 mm Motor power: 10 kW Ibsdpsdzqddjfx Abhsa Power connection: 380 volts, 50 Hz - Hydraulic overload protection in the ram - Pneumatic clutch and brake combination ORTLINGHAUS - Ram weight compensation cylinder - Motorized ram adjustment - Tabletop with ball bearings - Two-hand operation - Central lubrication system HELIOS - Stroke counter - UVV 7n 5.1 §4a, paragraph 2, No. 3b for manual feeding operations Space requirement L x W x H: 2300 x 1800 x 3200 mm Weight: approx. 10 tons Good condition (very little use)

Condition: ready for operation (used), Year of construction: 2013, A Morlock single-color pad printing machine is available. Ink system: cup system, oval print image diameter range: 100mm-250mm, min. cliché print image dimensions X/Y: 100mm/210mm, max. cliché print image dimensions X/Y: 250mm/280mm, ink cup diameter: approx. 80mm, pressing force range: 1100N-1500N, max. cycle rate: 1400-1800 cycles/h, machine dimensions X/Y/Z: approx. 1050mm/500mm/650mm, weight: approx. 250kg, control: Siemens. Documentation available. An on-site inspection is possible. Ijdpfx Aoxd Av Hebhsba

Condition: used, Vötsch Type: NTUD 125/130/125 Pass-through oven Last maintenance: 3.12.25 Temperature control in 3 zones: Control of the internal temperature via an electronic temperature control system, divided into 3 separate temperature zones and controlled by semiconductor switching devices. This ensures good temperature uniformity whether operating in fresh or recirculated air mode. Temperature program control: The CTC control system is operated via a dialog PC with TSI software for the heating control of each temperature zone, as well as the activation of the recirculation fans and damper control. Horizontal airflow with reversal: By switching the electronically or pneumatically actuated dampers, the airflow direction can be set from left to right or right to left. The airflow direction for each of the 3 zones can be independently adjusted. Ibjdpfx Aboy H Akrehsa Vertical airflow: By shifting a cover plate in the oven ceiling. Useful floor area: The floor area can be driven on using customer-provided loading trolleys. Recirculation fans: Each zone is equipped with a radial fan. Usable space dimensions: 1300 mm height / 1250 mm width / 1250 mm depth External dimensions: 2490 mm height / 1770 mm width / 1810 mm depth Volume: 2000 liters Connection rating: 400V(N)PE AC 50/60 Hz 22 kVA Rated current: 32 A Power: 18 kW Nominal temperature: 50 to 150°C Weight: 1000 kg Condition: used Scope of delivery: (See photo) (Specifications and data subject to change and errors excepted!) We are happy to answer any further questions by phone.

Condition: used, We offer used trusses for sale here. TECHNICAL DATA Clear span: 3,600 mm Box profile: 125 x 50 mm - Load capacity per truss pair: 3,700 kg Box profile: 130 x 50 mm - Load capacity per truss pair: 3,800 kg Color: Daffodil Yellow Condition: used QUANTITY-BASED PRICING per piece - Stock quantity: 2000 pieces 1 - 50 pieces: €17.50 net 51 - 100 pieces: €16.00 net 101 - 250 pieces: €14.50 net 251 pieces and up: €13.00 net PROJECT PLANNING Our sales team will be happy to prepare a non-binding offer tailored to your requirements. TRANSPORT & INSTALLATION We will gladly assist you with the transport and installation of the goods. TERMS OF PAYMENT Iedpfey H D Ekox Abheba The terms of payment will be agreed upon in the event of an order. The price is understood to be the unit price/net price or as stated in the product description (plus VAT). You will, of course, receive an invoice with VAT shown. ABOUT US DLK, based in Nordhorn, trades in new and used products from the fields of warehouse logistics, material handling technology, storage platforms, textile storage, and machines for the retail, industrial, and craft sectors. We continuously offer interesting used products from various manufacturers/brands at attractive prices. If you have any questions, please do not hesitate to contact us. Win-win – The success factors of DLK – Warehouse technology | Levelmaker® | Logistics | Solutions

Condition: ready for operation (used), Rexroth MAC112C-0-CD-3-F/130-B-0, 3-phase permanent magnet motor, part number: R911252318, serial number: MAC112-80695. The motor has been completely overhauled by the manufacturer, is used, in good condition, and is 100% functional. Scope of delivery as shown in the photos. Ibedpfxji D Ngce Abhja

Condition: ready for operation (used), Indramat MAC112C-0-KD-3-F / 130-A-0 Permanent Magnet Motor, serial number: 58102, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Iodpfx Abji D Iqrohoba

Condition: good (used), Standard holders and accessories, SASSEX spiral drill bits, Sassex spiral drill bits, reaming bits, Sassex reamers, Sassex holders, tool holders, drill bit mounts, twist drills -Manufacturer: Sassex, clip-on holder -Mounting bracket: Type H7 125.1-150 -Recording: MK5 Ibsdpfswa Nuwjx Abhja -Tool: 90° / Ø 130 mm -Dimensions: Ø 130 x 375 mm -Weight: 9 kg

Condition: good (used), The scope of delivery includes: 1x used grating Material color: hot-dip galvanized Total depth: approx. 1,110 mm (support bar direction) Total width: approx. 1,130 mm (cross bar direction) Support bar: TS30/2.00 Frame height: approx. 30 mm Mesh width: approx. 35 x 40 mm Weight per piece: approx. 22.18 kg Internal designation: GR-125 Iodpjwmb Aasfx Abhoba Note: - The grating may have damage, scratches, dents, and welds. Your contact person in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately from us depending on the delivery location and scope of delivery.

Year of construction: 2005, condition: like new (used), “ThyssenKrupp Turbo 2,2×4,0(5,2)DD“ for Sale Find our complete stock on our website. Ibedoglvw Sjpfx Abhoa Manufacturer: Thyssen/Krupp Type: 2,2 x 4,0 (5,2) DD Size: 2.200 x 5.200 (4.000) mm Mach. No.: 2-485-20540 Year of Manufacture: 2005 Decks: 2 Included: – 15kW/4 (950 RPM) Electrical Motor – Springs Vibrating screen can be sandblasted and painted.

Condition: like new (used), OVERHAULED “GFT KSS-24/70-2-2018 .” for Sale Also many other manufacturers like: ThyssenKrupp / BOA / Metso / Allis-Chalmers / Skett / Siebtechnik Find our complete stock on our website. Manufacturer: GFT Ijdpfx Aboggfk Hehoba Type: 24/70-2-2018 Size: 2.400mm x 7.000mm Decks: 2 Year of manufacture: 2006 Overhauled. With new bearings. Included: – Electrical Motor – Springs Vibrating screen is sandblasted, painted and ready for use!

Condition: used, “Functionally tested; item comes from the dismantling of equipment from an automotive supplier.” 6 units available Manufacturer: Zebra Technologies Model: ZT230 Printing process: Thermal transfer / Direct thermal Resolution: 203 dpi Print width: up to 104 mm Print speed: up to 152 mm/s Interfaces: USB, RS232, Ethernet (optional) Material compatibility: Labels, continuous material Ibedpfozhnxusx Abhea Special features: Robust metal housing, LCD display

Condition: used, Quantity: 3 units Used industrial electronics module from Straschu Industrie Elektronik for control and communication applications. Manufacturer: Straschu Industrie Elektronik Model: PME02i-MOD Device type: Communication module Application area: Industrial automation Mounting type: Control cabinet mounting Ibjdpfxozd Rate Abhoa Condition: Used

Condition: used, Make: Kemper Model: SP A Size: 125 Factory number: 6710424 Flour capacity: 125 kg, Dough capacity: 200 kg, Ibedpfx Aszux U Hebhja 2 speeds, Includes 2 mobile mixing bowls The machine is sold as shown in the pictures.

Condition: ready for operation (used), ThyssenKrupp Liftequip VVVF converter CPI 32 / 6619 00 3121_L SN: 1095720, used, good condition, 100% functional, scope of delivery as per photos Ibodpfszu Hhnex Abhsa

Condition: good (used), clear span: 2,700 mm, total length: 11,400 mm, load per truss pair (max.): 1,500 kg, shelf height: 2,500 mm, Technical data for the pallet racking system: Racking system: META (Thyssen) Type: Multipal S Technical data for the installation: Number of racking rows: 01 unit Length per racking row: approx. 11,400 mm Number of bays per racking row: 04 units, each 2,700 mm Number of levels including the base level: 02 units Technical data for the capacity: Pallet spaces per bay: 09 units Number of pallet spaces per row: 36 units Total number of pallet spaces: 36 units Based on: Load handling unit: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Overall height including pallet: not specified Weight per pallet (max.): approx. 500 kg Included in the scope of delivery: 05x Pallet racking uprights, used Material color: Sendzimir galvanized Isdpfx Ajzuth Uebhsba Frame profile: SR120|20 Profile dimensions: 120 x 75 x 2.00 mm Includes cross and diagonal braces, Base plates The uprights are pre-assembled (bolted frame) 2,500 mm high 1,100 mm deep 16x Pallet racking beams, used Material color: yellow Beam type: HN85|20 Box profile: 85 x 50 mm Grapple: 3 HK (hooks) Clear span: 2,700 mm Max. load per beam pair: 1,500 kg, with evenly distributed load 32x Locking pin, used Material color: Sendzimir galvanized For securing the longitudinal beams against unintentional lifting 20x Bolt anchor, new Manufacturer: Hilti Type designation: HST2 V3 M12x105 5-25 Design: Carbon steel, galvanized Approved for: cracked concrete 10x Shimming plate, used Material: Sendzimir galvanized For leveling the racking uprights that are installed on uneven ground 01x Load sign With information on bay and frame loads, manufacturer and order number Dimensions: 420 x 297 x 3 mm General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: good (used), clear span: 2,700 mm, total length: 22,365 mm, load per truss pair (max.): 1,500 kg, shelf height: 2,200 mm, Technical data for the pallet racking system: Racking system: META (Thyssen) Type: Multipal S Technical data for the installation: Number of racking rows: 01 unit Length per racking row: approx. 22,365 mm Number of bays per racking row: 08 units, each 2,700 mm Number of levels including base level: 02 units Technical data for the volume: Pallet spaces per bay: 09 units Number of pallet spaces per row: 72 units Total number of pallet spaces: 72 units Based on: Load unit: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Overall height including pallet: not specified Ibsdszupayepfx Abhoa Weight per pallet (max.): approx. 500 kg Included in the scope of supply: 09x Pallet racking uprights, used Material color: Sendzimir galvanized Frame profile: SR85|20 Profile dimensions: 85 x 75 x 2.00 mm Including cross and diagonal braces, Base plates The uprights are pre-assembled (bolted frame) 2,200 mm high 1,100 mm deep 32x Pallet racking beams, used Material color: yellow Beam type: HN85|20 Box profile: 85 x 50 mm Connector: 3 hooks Clear width: 2,700 mm Max. load per pair of beams: 1,500 kg, with evenly distributed load 64x Locking pins, used Material color: Sendzimir galvanized For securing the longitudinal beams against unintentional lifting 36x Bolt anchors, new Manufacturer: Hilti Type designation: HST2 V3 M12x105 5-25 Design: Carbon steel, galvanized Approved for: cracked concrete 18x Shims, used Material: Sendzimir galvanized For leveling the racking uprights that are installed on uneven ground 01x Load sign with information on bay and frame loads, manufacturer and batch number Dimensions: 420 x 297 x 3 mm General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: used, clear span: 2,700 mm, load per truss pair (max.): 1,500 kg, Technical data for the pallet racking crossbeam: Racking system: META (Thyssen) Included in the scope of delivery: 01x Pallet racking crossbeam, used Material color: yellow Box profile: 85 x 50 mm Crossbeam type: HN85|20 Agraffe: 3 HK Clear width: 2,700 mm Maximum load per crossbeam pair: 1,500 kg with evenly distributed load 02x Locking pin, used Material color: Sendzimir galvanized For securing the longitudinal beams against unintentional lifting out Iodszumfyopfx Abhjba General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: excellent (used), Year of construction: 2013, operating hours: 55,200 h, functionality: fully functional, machine/vehicle number: A0035A0294, Machine type: TruPunch 3000-1300 (S11) TruPunch 3000-1300 (S11), medium format 1250/2500 We are the first and only owner of the machine. Ibjdpfx Abozd U D Njhja Machine with complete history and service documentation. Machine is in fully working order and in continuous operation. Technical data: Width 6500 mm Depth 6203 mm Height 2252 mm Max. punching sequence (E = 1 mm) 1000 1/min Max. punching sequence – marking 2500 1/min Punching mode, X-axis 2500 mm Punching mode, Y-axis 1250 mm Max. sheet thickness 6.4 mm Max. workpiece weight 160 kg Max. punching force 180 kN Multitool tool change time 0.3 sec Number of tools/sheet clamps | 18 pcs / 2 pcs Max. part size, part flap when punching 500 mm x 500 mm Max. part size, rigid slide for punching (with sliding table) 80 mm x 50 mm Average power consumption with active automatic shutdown 0.3 kW Average power consumption during production 5.6 kW Additional, non-standard machine equipment: 1) Thread forming function with thread counter and thread forming tool damage control: chip-free thread forming is possible in both structural steel and stainless steel and aluminum. The threading tool is mounted like all other tools in the head. Thread size to be machined ranges from M 2.5 to M10. A thread sensor enables control of the threading tool damage. User-friendly operation, including lubricant level control. 2) Marking/surface embossing function: fast marking using appropriate tools. High-quality knurling can be performed at high speed. 3) Lowerable die: the lowerable die enables scratch-free processing because it moves downward when positioning the sheet metal. 4) Additional clamping device: recommended for processing very thin sheets and when using roller tool machining technology. An additional 2 clamping devices can be installed. In combination with the SheetMaster Compact, a third clamping device is recommended. 5) 3 x Option - vertically movable clamping device: the clamping devices move vertically (maximum stroke 12 mm); enables direct processing of the sheet metal at the clamping devices. This option reduces scratches from high forming dies. 6) Sensor in the slide for small parts: control of the slide for small parts (included in the "Nibbling-free machining" option). 7) Second locating pin: the pin is located on the outside on the right side. 8) RTC tool cassettes: 17 tool cassettes with die plates, enabling quick machine retooling. 9) Brush table with unloading and loading assistance: a brush table is recommended for processing particularly delicate materials. Vertically moving balls embedded in the table facilitate the loading and unloading process. We invite you to contact us.

Condition: ready for operation (used), Motor power: 90kW, with control cabinet, the vertical crusher is located in an enclosure. Ijdsnn Aamepfx Abheba

Condition: used, Used stainless steel tank / silo / IBC Previous application: dry bulk goods Item number: 10895 Volume: 1,160 litres Type: Standing, in a stainless steel stacking frame Product-contact material: 1.4301 / AISI304 Manhole: 450 mm Design: Single-walled Operating pressure according to nameplate: ATM Iodpfx Absyvgprehoba Tank dimensions: Total width: 1,270 mm Total length: 1,080 mm Total height: 1,900 mm Leg height: 120 mm Materials: Internal: 1.4301 / AISI 304 External parts: Stainless steel Features: Nameplate: yes Outlet diameter: DN250 Outlet valve: Butterfly valve Clearance from outlet to floor: 200 mm

Condition: excellent (used), CATALOG NUMBER 7753 TECHNICAL DATA - max diameter of processed dowels: 130mm - installed sleeve: 110mm - max diameter of input material: 160mm - min length of input material: 800mm - max machining allowance per side: 15mm - knife head drive motor: 15kW - 3 feed speed options + forward/reverse - feed motor: 1.1kW Configuration: - 3 toothed infeed rollers - 3-knife head - 3 smooth outfeed rollers - dimensions (L/W/H): 3100x1400x1500mm - weight: 2100kg ADVANTAGES – Made in Poland – 3-knife head – Used dowel lathe, in very good condition Isdpfxezulqne Abheba Net price: 32,900 PLN Net price: 7,830 EUR (conversion at 4.2 PLN/EUR) (Prices may vary with greater exchange rate fluctuations)

Condition: used, 1 item = 720 kg of BÖHLER-THYSSEN stick electrodes Welding electrodes for electric arc welding Stored dry, in 6 kg packages Type Phoenix SH Yellow B + Phoenix Special Yellow AWS A5.1-91 Item No. 18952 Electrode diameter: Ø 5 mm Electrode length: 450 mm DIN: EN 499-E38 2 RB 12 - Rutile-based stick electrode. - Easy welding in root, fill, and cover passes - Excellent welding in all positions - Suitable for X-ray quality welding in pipeline, boiler, and tank construction - Can be used on factory-coated sheets - In unopened original packaging, stock item Total weight: 720 kg The scope of delivery is: 30 packages of stick electrodes, each containing 24 kg are available Ibedpfsxcnktox Abhsa 1 package = 24 kg of stick electrodes, welding electrode for electric arc welding = 4 packages of stick electrodes, each containing 6 kg 720 kg = 120 packages, each containing 6 kg = 30 packages, each containing 24 kg

Condition: excellent (used), Catalogue number 7979 TECHNICAL DATA - Max. diameter of processed dowels: 130mm Iedpfx Abszcc Rvohjba - Installed bushing: 57mm - Min. input material length: 800mm - Knife head drive motor: 18.5kW - 4 feed speeds + forward/reverse - Feed motor: 2.2kW In order: - Infeed traction rolls, toothed: 6 pcs - 3-knife head - Outfeed traction rolls, smooth: 6 pcs - Extraction port diameter: 140mm - Additional bushings included: 40, 45, 50, 75mm - Dimensions (L/W/H): 3100x1300x1400mm - Weight: 2100kg ADVANTAGES – Polish manufacture – 3-knife head – Additional bushings included: 40, 45, 50, 75mm – Used dowel rounding machine, very good condition Net price: 31,900 PLN Net price: 7,590 EUR (based on exchange rate of 4.2 PLN/EUR) (Prices may change with higher fluctuations)

Condition: excellent (used), Hammer Krupp HM720-1CS with Lehnoff MS21 adaptor Suitable for 20-30 ton excavator Weight : 1.600 KG Isdpfozc Egysx Abheba In working condition