Used Tickhill Engineering Feed Hopper / Receiving Hopper for sale (32,630)

Condition: repair required (used), feed hopper / buffer hopper Giedpswydmnefx Ahvou

Condition: used, Technical data feed hopper with hydraulic moving floor and bag opener for recyclables from yellow bags and residual waste: Manufacturer BRT HARTNER GmbH Type HP5-3035 Year of construction 2015 Hopper volume 30 m³ Drive line 17.5 kW Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Condition of the machine: The feed hopper with bag opener was used at a large recycling plant, where recyclable materials from yellow bags or commercial waste were tipped into the hopper using wheel loaders, the bags were opened using the bag opener, and the recyclable materials were transported to a sorting plant or the commercial waste was transported in measured quantities for further processing. The system functioned flawlessly until it was dismantled and replaced with a larger system with higher throughput capacity. The machine was dismantled into individual parts in our workshop, partially overhauled, reassembled, and tested during operation. The following overhaul work was carried out and the following spare parts were replaced: Dismantling of the feed hopper and bag opener into individual parts. Cleaning, partial sandblasting, priming and painting of the steel parts. Various wear and cover plates were newly manufactured and installed. Cutting off the worn ends (approx. 40cm) of the push floor pipes. Welding on the new pipes and smoothing the push floor pipes. Godpfoy Urtfjx Ahvjiu Replacement of all plastic sliding plates for the hydraulic push floor. Removal of the hydraulic unit from the push floor, emptying of the hydraulic oil tank, replacement of the oil filters, refilling with new hydraulic oil. Replacement of the three hydraulic blocks, all valves, the oil sight glass and all hydraulic hoses from the hydraulic unit. The seal kit and hydraulic hoses were replaced on all three hydraulic cylinders of the push floor. All six limit switches (proximity sensors) on the push floor were replaced. The conveyor chains on the left and right of the scraper conveyor were replaced. Seven carrier bars on the scraper conveyor were replaced. The drive motor for the ripper blades was replaced. All nine pneumatic cylinders for the pressure pipes were replaced. All pneumatic lines and connections were replaced. All of the plastic sliding plates for the hydraulic operation of the bag opener were replaced. The bag opener can be moved vertically so that the system can also be used for commercial waste or residual waste without the bag opener. The side impact protection plates on both sides were replaced. Various wear parts of the bag opener have been replaced. The entire system has been rewired and reconnected. The system control in the control cabinet has been retrofitted by the manufacturer BRT Hartner to a self-sufficient individual control system and the standard programme has been reloaded into the control system. The system has been commissioned and tested by the manufacturer BRT Hartner, see the function video. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, No. 10012 Feed hopper Rema Used Metal plate conveyor / steel plate belt Defective gearbox (Bonfiglioli) Drive power 15 kW Belt width 2000 mm Axis length 10000 mm The system has been out of operation since the end of January 2025 due to gearbox damage Without output conveyor Transport dimensions approx. 15000 x 3000 x 4000 / 5500 mm LWH Sale on behalf of customer, ex location near 78628 Rottweil, without dismantling, without transport and assembly Errors in description and price excepted Dismantling, transport and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale Any warranty is excluded for used machines, the following applies: “purchased as viewed” Pictures and videos serve as examples and do not represent the actual scope of delivery Gisdjv N E Iyjpfx Ahvou Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Year of construction: 2005, condition: excellent (used), We offer a used dosing hopper with internal dosing belt and internal conveying rake: Dimensions: L: 3.90 m, W: 0.86 m, H: 1.50 m. Giodpfx Aheiuxucevou Belt width: 0.75 m. Including an associated conveyor belt: Length: 4.20 m, belt width: 0.50 m. Very good condition. Technical details: See photos.

Condition: used, functionality: fully functional, gearing type: mechanical, fuel type: electric, Year of construction: 2019, Height: approx. 4,700 mm Bunker volume: approx. 60 m³ Plate conveyor width / length: approx. 1,150 x 4,800 mm Length: approx. 7,400 mm Width: approx. 5,200 mm Bonfigioli gearbox: Type SK 185 Giodpewk E Emsfx Ahvsu Siemens electric motor: 346 to 524 volts, 160 watts

Condition: ready for operation (used), * Brand: Nordberg Giodpfjywmkkex Ahvou * Model: feeding table with hopper * ding table: 5000 x 1100 mm * Dim. hopper: 5500 x 3700 x 2500 mm * Driving: 22 kW E-motor

Condition: good (used), - Output: up to max. 30to/h - Motor: 400V, 50Hz - Without electrical equipment Gjdpfemn I Nqox Ahvjiu Mass: - Length: approx. 2000mm + discharge screw - Width: approx. 1700mm - Height: approx. 1700mm

Condition: good (used), conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor, flat belt conveyor -Conveyor belt: Belt conveyor on solid base frame with feed hopper -Speed: 3.4/6.6 m/min -Belt width: 190 mm -Conveyor length: 745 mm -Drive: VEM 0.14/0.25 kW, see photo nameplate Gsdpfx Ahsvazpuevoiu -Transport dimensions: 460/1255/H1185 mm -Weight: 149 kg

Condition: good (used), Feed container for blasting system, sandblasting system, blasting system, sandblasting cabinet, rotary basket system, wire belt, overhead conveyor and roller conveyor blasting system, free blasting system Godpfx Aheqcyzwevoiu -Handover: in its current condition as inspected -System: Individual components see photos -Feed container: Type Exactomat 2 G - 60 -Vacuum pump flow rate: 26.2 m³/h -Dimensions: 830/580/H1730 mm -Weight: 296 kg

Condition: used, Stainless steel dosing screw, feed screw conveyor, auger Equipped with additional feed hopper with aluminium lid Screw diameter: 200 mm Motor power: 3 kW, 36 rpm Total length: 1730 mm See our other listings VMA Wekerom Gjdpfx Asx Nzu Ujhvoiu

Condition: excellent (used), Offered is a used feed hopper with pre-screening. Manufacturer: Haver & Boecker. Year of manufacture: 1995. Type: UF 1200x3650. Gjdpfxev N H Hds Ahveiu Very good condition, fully functional.

Condition: repair required (used), For sale: receiving/hopper bunker structure Gsdpfx Ahowydd Hsvsiu

Condition: excellent (used), Belt width 127 cm Belt length 140 cm Minimum table height 90 cm Maximum table height 99 cm Godpfxjuyhcfs Ahvjiu Transport dimensions of the table: Height 95 cm Width 165 cm Length 147 cm

Year of construction: 2025, condition: new, For sale: New buffer hopper with a loading grate equipped with a removable deagglomeration screen Gijdpfjw Tc Txox Ahvsu

Year of construction: 2021, operating hours: 1,513 h, condition: used, functionality: fully functional, overall weight: 11,500 kg, total length: 6,050 mm, total width: 2,450 mm, total height: 2,700 mm, machine/vehicle number: B205, Our robust FEED HOPPER is specifically designed for the precise dosing of challenging, hard-to-meter feed materials. Equipped with a plate belt, the hopper reliably handles abrasive or coarse-grained materials. With a capacity of 7 m³ and an optionally integrable leveling roller, the feed rate can be adjusted. Giodpfx Ahoxta D Tovsu This module is part of our rental fleet.

Condition: new, New Conveyor with overhead feeder hopper Both units are mobile on castors Feeder hopper with opening end door, adjustable exit gate to conveyor Feeder hopper dimensions 800mm x 740mm x 600mm deep Gsdpfjwd Nthjx Ahvsiu Conveyor belt dimensions 1800mm x 230mm W x 1260mm H Conveyor height is adjustable VFD on conveyor drive

Condition: ready for operation (used), functionality: fully functional, A good used Hopper Feeder fopr feeding small parts into assembly machine or feeding a bowl feeder with bulk parts - stainless steel conveyor - flighted belt (comes with a second spare belt also) - three phase geared drive unit - 24 V DC sensors (2) for control of belt index if required Ready to ship worldwide Gedsw D Ev Eepfx Ahvsiu More pictures and videos available upon request

Year of construction: 2019, condition: excellent (used), Autopack Vibratory hopper Gisdpfxozcg Ewe Ahveu 2019, Stainless, 150Kgs stainless hopper, 250mm discharge width, overall length 1500mm x overall width 1050mm, 1Ph

Year of construction: 2006, condition: excellent (used), functionality: fully functional, KIREMKO BRSET660 | Double screw conveyor with hopper / Vertical conveyor Manufacturer: Kiremko Model / Type: BRSET660 Serial number: 05-1070-AE Year of manufacture: 2006 Power supply: 400 V, 50 Hz, 3 phases Screw diameter: 600 mm Godpfszczqzox Ahvoiu Screw pitch: 250 mm Lifting / discharge height: 2800 mm Dimensions: 6800 x 2200 x 4300 mm Professional, high-performance double screw conveyor from the Dutch brand Kiremko – a global leader in the production of processing lines for the potato and vegetable industry. The device is designed for continuous operation in demanding industrial conditions. It is ideal for large fruit and vegetable processing plants (potatoes, root vegetables). The heart of the machine is a powerful, integrated buffer and feed hopper, working with two massive stainless steel screws with an impressive diameter of 600 mm and a pitch of 250 mm. This configuration prevents the material from "jamming," ensures even distribution, and allows for trouble-free transport of materials with varying particle sizes and high viscosity to a height of up to 2800 mm.

Condition: used, The device is in working order and ready for use. Feed width: 1500 mm Gisdjy Ua Hmepfx Ahvou Height: 1000 - 1300 mm Length: 1500 mm Discharge height: 950 mm Belt width: 250 mm Height of scrapers: 10 mm Depth: 900 mm Please check my other listings.

Condition: used, Vibratory hopper, dosing hopper, storage bunker, linear vibratory feeder, sorting device Vibratory bowl feeder, spiral feeder / vibratory feeder Vibratory bowl, screw feeding with vibratory feeder for screwdriving technology Feeding system, feed device Manufacturer: MÜLLENDERS Type: MLF-G2 Year of manufacture: approx. 2000 Hopper capacity: approx. 4 liters Vibration frequency: 6000 Hz Control voltage: 24 volts DC (an external power supply is required) Mains connection: 230 volts, 50 Hz - An external 24 VDC power supply is required for the start/stop signals (the controller does not have an internal 24 VDC power unit). - REO control unit, type Reovib RS6 439-459, for adjustable vibration speed - Stainless steel hopper, hopper open to the rear - Base frame made from aluminum profile system Required space L x W x H: 380 x 210 x 700 mm Weight: 20.5 kg Good condition Gijdpfx Ahoy E T Dtevju

Condition: excellent (used), Year of construction: 2000, A feed conveyor with steel hinge plate belt. It was last loaded using a wheel loader and tipper truck. Overall structural length: 9.6 m Hopper size: 8.0 x 3.6 m Conveyor width at the bottom: 1.85 m Maximum width with drives: 3.2 m Gsdeiwxmbspfx Ahvoiu Conveyor belt width: 1.3 m Overall height: 5.3 m Belt speed: 0.05–0.29 m/min Conveyor chain: FV 315 with bushing and wear-resistant roller Throughput capacity: 3 to 14 m³/hour Belt geared motor SEW: 0.75 kW Speed: 0.2 rpm Torque: 18,000 Nm Reel shaft speed: 64 rpm Reel geared motor Flender: 7.5 kW Total weight: approx. 20 tonnes With steep conveyor belt included.

Year of construction: 2003, condition: ready for operation (used), Built in 2003 Size max 300 x 300 mm Gisdpfx Aedybiiehveu min 100 x 100 mm Speed max 2.100 Pack./h Weight 160 kg (approx.)

Year of construction: 1988, condition: ready for operation (used), top sheet hopper feeder Gijded Ad Nljpfx Ahvsu Built in 1988

Condition: new, functionality: fully functional, Year of construction: 2026, CONSTMACH vibrating feeder bunkers are high-efficiency equipment designed to ensure continuous and balanced feeding of crushers in stone crushing and screening plants. These bunkers are placed in front of primary impact crushers or jaw crushers to ensure a homogeneous flow of material. This increases the capacity of the crushers, balances the loads on the intermediate crushers, and ensures continuity in the overall production line. The vibrating feeding system prevents sudden loads, eliminating the risk of overloading on conveyor belts and thermal damage to equipment. Thanks to CONSTMACH's special design, the vibrations in the bunkers are smooth and balanced. This ensures both a steady material flow and extended machine life. Otherwise, uneven feeding could cause serious wear on crusher hammers, conveyor belts, and bearings. Using a vibrating feeder bunker helps reduce maintenance costs, increase operational efficiency, and maintain long-term performance throughout the facility. Vibrating Feeder Bunker Technical Specifications Model: CPG - 09 Body Size: 2,500 x 520 mm Grid Size: 820 mm Motor Power: 2 x 3 kW Bunker Volume: 8 - 10 - 15 m³ Capacity: 80 - 100 t/h Weight: 8,000 kg Model: CPG - 10 Body Size: 3,000 x 850 mm Grating Size: 1,160 mm Motor Power: 2 x 4.5 kW Hopper Capacity: 10 - 15 - 20 m³ Capacity: 150 - 200 t/h Weight: 12,000 kg Model: CPG - 11 Body Dimensions: 4,600 x 1,100 mm Grate Dimensions: 1,400 mm Motor Power: 2 x 9.2 kW Bunker Volume: 15 - 20 - 30 m³ Capacity: 200 - 300 t/h Weight: 18,000 kg Model: CPG - 13 Body Size: 4,880 x 1,370 mm Grating Size: 1,840 mm Motor Power: 2 x 11 kW Bunker Volume: 30 - 45 - 50 m³ Capacity: 350 - 500 t/h Weight: 26,000 kg Why Choose CONSTMACH Vibrating Feeder Bunkers? CONSTMACH is a trusted brand in the industry with years of engineering experience and high production standards. Our products stand out with their durable body structure, low maintenance requirements, and energy-efficient motor systems. Each one undergoes high-quality control processes to ensure long-lasting use. CONSTMACH Vibrating Feeders increase the performance of your crushing plant while minimizing your operating costs. If you are looking for quality, durability, and maximum efficiency, CONSTMACH is the right solution. What Do We Do at Constmach? Gijdpfxjxqf Sdo Ahvsu Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.