Used Tira Climate Cell for sale (4,350)

Condition: excellent (used), TIRA Type: TCZ 4022 S -2K Description: Air-cooled climate simulation chamber System Structure: The unit consists of the following main assemblies: - Walk-in, insulated chamber - Air handling room - Humidification system - Machinery room - Control cabinet Technical Data: Performance Range for Temperature Testing: - Temperature range: -40...+140°C - Temperature stability, in supply air (temporal): ≤ ±0.5°C (without thermal test chamber load, according to DIN 50011 T13 / EN 60068) - Temperature stability, in supply air (spatial): ≤ ±1.0°C (without thermal test chamber load, according to DIN 50011 / EN 60068) - Heating rate (per DIN 50011): approx. 2.0 K/min (without thermal test chamber load, per DIN 50011 / EN 60068) or test specimen in the temperature range of -30°C...+85°C - Cooling rate (per DIN 50011): approx. 2.0 K/min (without thermal test chamber load, per DIN 50011 / EN 60068) or test specimen in the temperature range of -30°C...+85°C Performance Range for Climate Testing: - Temperature range: +10...+90°C - Humidity working range: 10...approx. 95% RH (without thermal test chamber load) - Dew point temperature range: +5...+89°C (without thermal test chamber load) - Humidity stability (in supply air, temporal): ≤ ±2.5% RH, measured in supply air Performance Range for Climate Testing with Heat Compensation: - Temperature range: +15...+80°C - Humidity: 15...approx. 80% RH (without thermal test chamber load; with max. 16 kW heat compensation) - Dew point temperature range: +10...+74°C (without thermal test chamber load) Dimensions: - Test chamber (WxDxH): approx. 2260 x 4648 x 2260 mm - External dimensions (WxDxH): approx. 2660 x 6460 x 2800 mm - Clear door passage test chamber door (WxH): 2260 x 2260 mm - Climate module KB 127 (WxDxH): 1700 x 800 x 1400 mm - Control cabinet (WxDxH): 800 x 500 x 2000 mm Design: - Airflow: Supply air via perforated plate at the rear wall, ceiling area; exhaust air via perforated plate at the rear wall, floor area - Temperature control: Direct cooling via evaporation of refrigerant in a finned heat exchanger; heating via electric resistance heater - Dehumidification: Direct dehumidification via refrigerant evaporation in a heat exchanger - Interior lining: Stainless steel - Exterior cladding: Galvanized, plastic-coated steel sheet - Floor: Stainless steel, floor load 15,000 N/m² - Wheel load (contact area ≥4 cm²): 1,500 N/wheel - Door: Double-leaf, stainless steel, externally coated with viewing window (WxH): 1000 x 1000 mm - Test area lighting: 4 spotlights, 500 W each - Insulation: Dual-layer insulation, 80 mm PUR foam, 120 mm mineral wool - Refrigeration unit (1 pc): Bitzer 6G-30.2Y - Refrigerant: R449A - Refrigeration oil: SEZ 32 - Steam humidifier (1 pc): EDB 40 Color scheme: - Chamber RAL 9010, white - Door RAL 9010, white - Machine unit RAL 7032, pebble grey - Control cabinet RAL 7032, pebble grey Weights: - Total system: approx. 4,900 kg - Machine set KB 127: approx. 750 kg - Control cabinet: approx. 120 kg - Humidification unit: approx. 64 kg Connections: - Rated voltage: 400 V +6%/-10%, 3/PE N, 50Hz Bdedpfxsvx S Hhj Aamec - Rated power: 95 kW - Rated current: 150 A

Condition: good (used), Weiss Type: Walk-in Climate Simulation Chamber WK 50 / 40-120 Technical specifications of the climate chamber: Temperature range: -40...+120 °C Temperature tolerance: +/- 0.5°C Temperature change rate: 1 K/min Humidity range: 15...approx. 95 % RH Humidity tolerance: +/- 5.0 % RH Dimensions: Test space volume: 50 m³ External dimensions (W x D x H): approx. 4800 mm x 6100 mm x 2640 mm Test chamber (W x D x H): approx. 4500 mm x 5000 mm x 2200 mm Door opening (W x H): approx. 3000 mm x 2200 mm Condition: used Scope of delivery: (see picture) (Specifications subject to change and errors excepted!) Bodpfx Aouvi R Aoamsdc For further questions, we are happy to assist you by phone.

Condition: good (used), RS Simulators Type: Walk-in Climate Simulation Chamber KKC 22/45 Technical specifications: Temperature range: -40...+120 °C Temperature tolerance: +/- 1.5°C Temperature change rate: 1 K/min Humidity range: 10...approx. 95% r.h. Humidity tolerance: +/- 5.0% r.h. Dimensions: Test chamber volume: 22 m³ External dimensions (W x D x H): approx. 2600 mm x 6400 mm x 2800 mm Test chamber (W x D x H): approx. 2200 mm x 4700 mm x 2300 mm Door opening (W x H): approx. 2200 mm x 2300 mm Bedpfx Aajuviydsmodc Condition: used Scope of delivery: (see picture) (Subject to change and errors in technical data!) We are happy to answer further questions by phone.

Condition: good (used), RS Simulators Type: Walk-in Climate Simulation Chamber KKC 22/45L Technical Data: Temperature range: -40...+120 °C Temperature tolerance: +/- 1.5°C Temperature change rate: 1 K/min Humidity range: 10...approx. 95% r.H. Humidity tolerance: +/- 5.0% r.H. Dimensions: Test chamber volume: 22 m³ External dimensions (W x D x H): approx. 2600 mm x 6400 mm x 2800 mm Test chamber (W x D x H): approx. 2200 mm x 4700 mm x 2300 mm Door opening (W x H): approx. 2200 mm x 2300 mm Year of manufacture: 2009 Technical data for solar simulation: Control module: Mitronic STB1-8 Number of lamps: 8 Ballast unit: Mitronic CP2k5 – 2ZS Ignition unit: Hönle Bdedpjuvi Nfofx Aamjc Lamp type: OSRAM Powerstar HQI 2000W W/D/S Condition: used / second-hand Scope of delivery: (see image) (Specifications subject to change and errors excepted!) For further questions, feel free to contact us by phone.

Condition: excellent (used), Here we offer a Feutron climate test chamber. Feutron Climate Test Chamber Temperature Temperature range: -40...90°C Climatic range (without heat load): 10...85°C Temporal temperature deviation during temperature operation: ≤ ± 0.5 K/min Temporal temperature deviation during climatic operation: ± 1.0... ± 1.5 K/min Change rates Heating: avg. 2.0 K/min Cooling: avg. 2.0 K/min Standard IEC 1646 is achievable with testing, solar modules up to max. 160kg weight and nonlinear ramps (setpoint jump) Drying Air drying: condensation drying Humidity Air humidification: steam humidification Humidity range: 10...95 % r.h. Temporal humidity deviation: ≤ ± 3.0... ±5.0 % r.h. Dew point range: 8...80.9°C Test Chamber Test chamber volume: 7.0 m³ Dimensions Bjdpfx Asklv H Isamjdc Internal dimensions: Width 1500 mm x Height 2250 mm x Depth 2000 mm Swing door DIN right, heated, Width 900 mm x Height 2100 mm Observation window, heated, with blackout shutter and lockable: Width 500 mm x Height 600 mm Feedthrough: 2x, right front side, Ø 75 mm Irradiation unit, test chamber Opening: 4x in left side wall for SC 2500, each 850 x 700 mm Irradiated area when using SC 2500: 1200 x 1200 mm Radiation intensity at 1.0 m wall distance: 1000 ± 10% W/m² Lighting: 1x halogen lamp, 200W Refrigeration system: Bitzer compressor, semi-hermetic, 2-stage, air cooled Condenser: split condenser (outdoor installation, winter control) Refrigerant: R507 / R23 Temperature control system Coolant medium Tyfocor / water Mixing ratio 50/50% Coolant density: 1.072 kg/dm³ Filling quantity: approx. 80 dm³ Pyranometer Temperature range: -40...150°C Max. radiation absorption: 4000 W/m² Spectral range (50% points): 305...2800 nm Sensitivity (nominal): 7 µV/W/m² Power supply, test chamber Mains connection: 400V, 3/N/PE, AC, 50Hz Connection type: hardwired Max. simultaneous power demand: approx. 32.0 kW Supply fuse: 3 x 63, Char C (A) Power supply, SolarConstant Mains connection: 400V, 3/N/PE, AC, 50Hz Connection type: Max. simultaneous power demand: approx. 30.0 kW Supply fuse: 3 x 63, Char C (A) Overall external dimensions of the test cell including: equipment room/control cabinet and control cabinet for SolarConstant 2500 External dimensions equipment room: Width 3440 mm x Height 2580 mm x Depth 2950 mm /control cabinet: Width 2200 mm x Height 1830 mm x Depth 1100 mm External dimensions condenser, split: Width 900 mm x Height 950 mm x Depth 2000 mm Weight test chamber (total): approx. 2700 kg Condenser empty weight: 153 kg Weight: 2700 kg Type: 3707/06 Condition: used Scope of delivery: (see picture) (Technical data and information are subject to change and errors!) For further questions, we are happy to assist you by phone.

Condition: good (used), TIRA Type: Walk-in Climate Simulation Chamber TCZ 4012 S(m) Technical Data: Temperature range: -40...+120 °C Temperature tolerance: +/- 1.0°C Temperature change rate: 1 K/min Humidity range: 10...approx. 95 % rH Humidity tolerance: +/- 5.0 % rH Dimensions: Test chamber volume: 13 m³ External dimensions (W x D x H): approx. 2260mm x 3850mm x 2780mm Test chamber (W x D x H): approx. 2254mm x 2645mm x 2251mm Door opening (W x H): approx. 2251mm x 2254mm Condition: used Delivery contents: (see picture) (Subject to changes and errors in the technical data!) Bedpfxouvipwj Aamodc For further enquiries, please contact us by phone.

Condition: good (used), TIRA Type: Walk-in Climate Simulation Chamber TCZ 4020 S-2k Technical Specifications: Bodpfx Asuviumeamsdc Temperature range: -40...+140°C Temperature tolerance: +/- 1.0°C Temperature change rate: 2 K/min Humidity range: 10...approx. 95% r.h. Humidity tolerance: +/- 5.0% r.h. Dimensions: Test chamber volume: 19 m³ External dimensions (W x D x H): approx. 2660 mm x 4960 mm x 3300 mm Test chamber (W x D x H): approx. 2270 mm x 3190 mm x 2756 mm Door opening (W x H): approx. 2270 mm x 2756 mm Condition: used Scope of delivery: (see picture) (Specifications subject to changes and errors!) For further questions, we would be happy to assist you by phone.

Condition: good (used), TIRA Type: Walk-in climate simulation cell TTZ 4008 S(m) Technical data: Temperature range -40...+120 °C Temperature tolerance: +/- 1.0°C Temperature change rate: 1 K/min Humidity range 10...approx. 95 % r.h. Humidity tolerance +/- 5.0 % r.h. Dimensions: Test chamber volume: 8m³ Bjdpsuvil Ssfx Aamodc External dimensions (WxDxH) approx. 2410mm X 3920mm X 2530mm Test chamber (WxDxH) approx. 2002mm Χ 2148mm Χ 2005mm Door opening (WxH) approx. 2002mm X 2005mm Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: ready for operation (used), Year of construction: 2007, Immediately available ex location: Bdjdpfxjzap Txs Aamec CNC Vertical Balancing Machine TIRA Type KV 10 Year of manufacture: 2007 Rotor mass: 1 – 10 kg Rotor height up to 400 mm Rotor diameter up to 400 mm Max. balancing speed up to 2000 rpm Max. display sensitivity (gmm): 0.5 Drive power: 2.2 kW Weight: 1500 kg Price: EUR 4,500—plus VAT ex location.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, WELDING CELL IS COMPLETE REFRUBRISHED, READY TO WORK EQUIPPED WITH ROBOT MOTOMAN WITH CONTROL NX-100 CMT FRONIUS 4000 WITH RCU 5000 CONTRIOL AUTOMATIC CLEANING SYSTEM FOR GUN POSITIONER TWO SIDE ROTATING-SIMULTANEOUS WELDING ON ROTATION Bdsdpfxevkkife Aamec FOR CUSTOMER WE CAN ALSO PROVIDE INSTALATION AND START UP WITH ADDITIONAL OFFER. FOR THE SAFETY SYSTEM REQUEST, WE CAN DO IT WITH ADDITIONAL OFFER

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, WE OFFER AN NICE CONDITION TWIN ROBOTI WELDING CELL YEAR 2012, MACHINE WAS USED IN PRODUCTION FROM 2012 TO 2019 ONLY 7 YEARS IN USE . MACHINE WE CAN PUT FOR CUSTOMER ON GROUND, START UP AND MADE AN OPERATORS TRAINING POSITIONER IS HORIZONTAL TURNING: SEE VIDEO LENGHT OF POSITIONER: 4 METERS MAX LOAD PER SIDE PALET 750KG ROBOTS 2X OTC MODEL: NV61-NEFN ROBOTS CONTROL: AX-21 CV0000 WELDING MACHINES 2X FRONIUS CMT Bdodovkkhbopfx Aamec TOOLINGS PALET CAN BE CHANGING WE CAN OFFER ALSO TOLINGS FOR THE CUSTOMER PRODUCT

Condition: used, Year of construction: 1998, workpiece weight 150 kg workpiece length 2500 mm diameter 160 - mm balancing speed variable 100 - 3000 U/min dia. axle journal 160 - 350 mm Bodpfxewcg Elo Aamodc voltage 400 V total power requirement 1,5 kW weight of the machine ca. 1,5 t dimensions of the machine ca. 7,50 x 1,30 x 1,60 m Control 0,60 x 0,60 x 1,85 m Software TIRA X9000 Operating System Windows XP Software update 2007 Serial No.: R 32/98 Max display sensivitiy: 0.5 gmm Balancing speed 100 - 3000 RPM

Condition: used, Year of construction: 1995, documentation vorhanden Bsdpfx Aasyhrcrjmsdc dimensions of the machine ca. 4,10 × 1,20 × 1,40 m

Condition: reconditioned (used), machine/vehicle number: 550-235-ELD, GENERAL CHARACTERISTICS workpiece Ø max. 41 mm Range Module máx/min. 1,5 / 0.39 Rack face width 92 mm Manufacturing No. 550-235-ELD Máx/min. pitch form 20/40-32/64 Maximum stroke of tools trolley 760 mm Rack length máx. 610 mm ELECTRICAL CHARACTERISTICS Bdjdpfxjd Nw Tts Aamsc Main motor power 15 Cv

Condition: excellent (used), TIRA Type: TCC 7120 Temperature range: -75°C / +180°C Air-cooled condenser Temperature stability (over time and in the center of the usable space) ±0.1°C ... ±0.3 °C Maximum temperature change rate Heating: 4°C/min Bdedpowfddwefx Aamoc Cooling: 3°C/min Humidity range: 10% to 98% relative humidity Humidity stability over time ±1% ÷ ±3% Dew point range for long-term tests +2 / +94 °C Dew point range for short-term tests -20 / +2 °C External dimensions (L x D x H) 1320 x 2235 x 2137 mm Test space dimensions (L x D x H) 1000 x 1130 x 1020 mm Test chamber volume: approx. 1152 liters Max. load per grid: 50 kg Maximum floor load of the test chamber: 100 kg Refrigerants: R404A and R23 Power supply: 400V + 6%/-10% / 50Hz / 3P+N+PE Rated power: 10.2 max. 17.5 kW Rated current: 19.5 max. 32.0 A Noise level: approx. 80 dB(A) Weight: 1180 kg For your safety, the following information is provided as a buyer! The following steps are carried out in advance on our chambers: 1. Functional testing and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leakage test with certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical specifications, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Here we offer a TIRA temperature test chamber. TIRA temperature test chamber air-cooled The chamber has the option for an external test box with external sensor connection can therefore also be used as an external temperature control unit. Temperature range -20°C...+140°C Temperature stability over time ± 0.1°C...± 0.3°C External dimensions Width 860 mm x depth 1500 mm x height 2100 mm Test chamber dimensions width 601 mm x depth 545 mm x height 692 mm Electrical connection 400V +6% / -10% 50Hz 3P+N+PE Bdjdpfx Aasnyh T Ssmoc Rated current: 10.0 (max.17) A Rated power: 5.2 (max.9.0) kW Net weight: 735 kg Refrigerant: R404A / R23 Type: TTRE 2001S The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: good (used), LDS Type: V824 + Tira sliding table + SPA30K Shaker for medium forces Technical data: Sine force vector 26.689 kN (peak) Noise force vector 25,355 kN (effective) Half sine force vector 53,376 kN Mass of the movement element 21.55 kg Frequency range d.c. - 3200 Hz Sinus Bacceleration max. 981 m/s² Noise Acceleration max. 50 gn rms Velocity max. 1.78 m/s Deflection ± 12.7 mm Bdodouzf R Aepfx Aamsc Sliding table: WxHxD: approx. 1650 mm x 925 mm x 2450 mm Work surface: 991 mm * 991 mm Usable frequency range 0 to 2000 Hz thickness of the panel : 50 mm Weight of the panel: 94 kg Max load : 2200 kg Condition : gebraucht / used weight: Shaker approx. 1725 kg Sliding table 3500 kg Scope of delivery: (see pictures) Total weight approx kg 5300 (We reserve the right to make changes and errors in the technical data!) We will be happy to answer any further questions you may have on the phone.

Condition: used, Year of construction: 1987, rolling capacity max. NA t workpiece diameter 38 mm workpiece length 500 mm total power requirement 24 kW weight of the machine ca. 10 t dimensions of the machine ca. m Max.Ø tool slide stroke 760 mm Max.Ø rack length 610 mm Length of workpiece between centres, approx. 500 mm Max. tooth width / profile width 92 mm Max. workpiece Ø 38 mm Tailstock stroke on outboard support, hydraulic, approx. 500 mm Module range 0.3 - 1.3 Total electrical load, approx. 24 kW - 380 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features * KBH Workpiece Feed Device, standing parallel to the machine, at present set-up for feed-in and feed-out of shaft-formed workpieces, approx. Ø 16 x 200 mm long, with prism conveyor belt and lifting station for 2 shafts (blank and finished part), as well as workpiece positioning control. * Originally, external gears were formed on the machine using pinion cages (no. of teeth = 25), Ø approx. 32 mm x 14 mm long, workpiece Ø approx. 80 x 80 mm long. * Various accessories: * Separate switch cabinet. * Separate hydraulic unit, 900 l. * Coolant device in the machine. * Control panel with malfunction message in plaintext, etc. Roto Flo machines are ideal for mass production of smaller gears/profiles. The coldforming process is a lot faster and more economical than other chip removing methods. Workpieces are clamped between 2 live centres and 2 synchronous opposed directional coldforming racks simultaneously engage the workpart and start rotation. During rotation, the profile is formed successively within one stroke. In the calibrating zone, the profiling and surfacing performance of the tool are optimised. Profiles do not require a run-out. The coldforming process requires a rigid and heavy duty construction of the machine, which ensures the required precision over the years. Between 25,000 and 100,000 working cycles can be performed with one set of racks, also for serrations. Condition : Very good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. Thank you for your interest. We always have a good selection of gear machines available. Please let us know what you need. Bedpfxot Hw D Dj Aamedc

Condition: excellent (used), Year of construction: 2015, machine/vehicle number: B0508A0463, TRUMPF TruBend Cell 5000 – Robotic Bending Cell | Year 2015 Press brake: TruBend 5230 Robotic bending system: BendMaster Control system: TASC 6000 (robot and press brake programmed via the machine interface) Press brake specifications: Bodpfx Aow Eilyoamjdc Pressing force: 230 tons Bending length: 4,250 mm Year of manufacture: 02.2015 Serial number: B0508A0463 Operating hours: Machine operating time: 33,789.3 h Hydraulic system: 8,528.8 h Press beam time: 1,119.9 h Description: Fully automated bending solution – the TruBend Cell 5000 is designed for high-volume, precision production. The integrated robot enables efficient bending with minimal operator intervention. Condition: Very good, regularly maintained Dismantling, loading, and transport can be arranged.

Condition: used, Year of construction: 2011, functionality: limited functionality, laser power: 6,000 W, laser source model: TruFlow 6000, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Laser power: 6,000 W Laser source: TruFlow 6000 Bdodpfx Aaozaqzkomjc MACHINE DETAILS Connection power: 114 kVA Mains connection: 400 V Control voltage: 24 V Fusing: 200 A Compressed air connection: 6 - 14 bar Package dimensions Cabinet: 2600 x 800 x 1200 mm Laser head: 1200 x 1200 x 1200 mm Laser: 3000 x 1600 x 2800 mm 800 x 800 x 2000 mm 1400 x 1000 x 2000 mm 2 x 1200 x 800 x 2200 mm Note: The machine's dongle is defective.

Condition: used, This listing is for the Thermo Scientific CW2 Sorvall Cell Washing Centrifuge. The unit is in full working condition and ready for immediate use. This premium cell washer streamlines blood bank procedures and simplifies cleaning protocols. It offers reliable, automated performance with an easy-to-use digital interface, making it perfect for demanding clinical and research environments. Transparency Report and Technical Audit: • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished) [[1](), [2]()] Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: Bdjdpfxjza Dtae Aamec By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original)

Condition: ready for operation (used), Year of construction: 2017, pressing force: 173 t, controller manufacturer: TRUMPF, controller model: TASC 6000, Press brake manufactured in 2017. This TRUMPF TRUBEND CELL 5000 with TRUMPF TruBend 5170 features a maximum press force of 1700 kN and a stroke length of 445 mm. It includes the BendMaster 60 robot for automated handling and a TRUMPF TASC 6000 control system for efficient programming. If you are looking to get high-quality bending capabilities, consider the TRUMPF TRUBEND CELL 5000 press brake we have for sale. Contact us for further details. - Press Brake Model: TruBend 5170 (Extended Version)- Press Brake Max Press Force: 1700 kN- Press Brake Max Working Pressure: 340 bar- Press Brake Length of Stroke: 445 mm- Press Brake Voltage / Frequency: 400 V / 50 Hz- Press Brake Connected Load: 29 kVA- Press Brake Control Voltage: 24 V- Robot Model: BendMaster 60- Robot Connected Load: 17 kVA- Robot Weight: 2600 kg- Robot Voltage / Frequency: 400 V / 50 Hz- Control System: TRUMPF TASC 6000 (Graphical workshop programming, network capability)- Included Equipment: Extended version press brake, BendMaster 60, automated material handling/grippers, fencing and safety enclosures Bjdpfjza U Nfox Aamsdc Technical Specification Bending Length 4250 mm

Year of construction: 2026, condition: new, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 07/2027, type of input current: three-phase, machine/vehicle number: 2026, Lillnord fermentation breaker Maryline Model: FR 103-81 T Touch screen computer control Temperature range from max. -18°C to + 45°C Humidity from 60% to 90% RH for max. 30 trays 600 x 800 mm or 60 trays 600 x 400 mm Cooling unit ready to plug in above Coolant R 134A / cooling capacity 937 watts PID regulation of humidity and temperature Water connection 3/4 inch stainless steel version Connection 400V, 4.4 kW, 16A-CEE plug Bedpfx Ajk Iti Toamjdc Dimensions: 810 x 1030 x 2290 mm, WxDxH New device 12 months of warranty Option: - Door with thermal window - CO2 vaporizer - FlexBaker with ready-fermented products - Aggregate external Lillnord service partners

Year of construction: 2026, condition: new, functionality: fully functional, total length: 1,030 mm, total width: 810 mm, total height: 2,290 mm, energy efficiency: B, input voltage: 400 V, DGUV certified until: 07/2027, type of input current: three-phase, warranty duration: 12 months, machine/vehicle number: 2026, Lillnord fermentation room Model: Maryline R 103-81 T Touch screen computer control Temperature range from max. + 20°C to + 45°C Bdsdok Itizepfx Aamjc Humidity from 60% to 90% RH for max. 30 trays 600x 800 mm or 60 trays 600 x 400 mm PID regulation of humidity and temperature Water connection 3/4 inch stainless steel version Connection 400V, 3000 Watt, 16A-CEE plug Dimensions: 810 x 1030 x 2290 mm, WxDxH New device Lillnord service partners

Condition: like new (used), functionality: fully functional, type of input current: AC, total height: 2,100 mm, total length: 650 mm, total width: 750 mm, space requirement height: 2,100 mm, space requirement length: 650 mm, space requirement width: 750 mm, input voltage: 230 V, input frequency: 50 Hz, DGUV certified until: 07/2027, Equipment: documentation/manual, Cream cooler, Gram SKS 64 Gram model: SKS 64 CCG Stainless steel design For sheet metal 600 x 400 Digital temperature display from -5 to 12 °C Plug-in ready Forced-air cooling Connection 230V Used unit, like new With warranty Quality from a specialist company! Benefit from over 35 years of experience! Options: Maintenance contract Service package Spare parts box for added safety Bdodpfsxmra Hsx Aamoc Delivery service Installation and commissioning Visit our large showroom!