Used Top | Year Of Manufacture 1984 for sale (54,470)

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, operating hours: 413 h, Equipment: CE marking, UVV, For sale is a well-maintained Toyota BT Tyro SHE100 electric high-lift pallet truck with a load capacity of 1,000 kg and a lifting height of 3,600 mm. The unit was manufactured in 2022 and is in very good used condition. Thanks to its electric lifting and driving system, this high-lift pallet truck is ideal for use in warehouses, production facilities, shipping departments, and workshops. Its compact design and easy operation enable safe and comfortable working, even in confined spaces. Technical data Manufacturer: Toyota Material Handling Series: BT Tyro Model: SHE100 Year of manufacture: 2022 Factory number: 3022060077 Load capacity: 1,000 kg Maximum lifting height: 3,600 mm Weight: approx. 660 kg Electric driving and lifting system CE version Battery-powered Mast with load guard Equipment Electric driving system Electric lifting Multi-stage speed control Turtle function (slow speed) Battery charge level indicator Safety tiller Load guard Robust mast Integrated charger Low-maintenance drive system Condition Year of manufacture 2022 Very good overall condition Only 413 operating hours Recently inspected according to DGUV standards A new FEM4.004 inspection can be carried out on request Immediately ready for use Normal signs of wear and tear consistent with age and use Scope of supply Toyota BT Tyro SHE100 Battery Charger Inspection certificate available Accessories as shown in the pictures Special features Compact design Load capacity 1 tonne Lifting height 3,600 mm Electric driving and lifting system Ideal for warehouses, production, and shipping Proven Toyota quality Transport possible for an additional charge! The pallet truck will be inspected before sale. Technical data and equipment may vary. Errors, prior sale and changes are subject to change. All information without guarantee. Itedpfjzfkfrox Anwoh

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, For sale is a high-quality Renner RS Pro 22 screw compressor, including a refrigerant dryer. The system is of German quality manufacture and is ideally suited for craft businesses, carpentry shops, metal construction, industry, and workshops with higher compressed air requirements. The additional refrigerant dryer ensures dry and clean compressed air, which extends the service life of machines and pneumatic tools. Technical data: Manufacturer: Renner GmbH Model: RS Pro 22 Year of manufacture: 2019 Type: 3440 Motor power: 22 kW Voltage: 400 V Frequency: 50 Hz Phases: 3~ Delivery rate: 3,440 l/min Max. operating pressure: 10 bar Made in Germany CE version Equipment: Screw compressor Integrated refrigerant dryer Soundproof enclosure Industrial version Three-phase connection 400 V Maintenance-friendly design High air output Suitable for continuous operation Application areas: Carpentry Joinery Itsdpfjzfi Dtsx Anweh Metal construction Automotive workshops Industry Craft businesses Scope of delivery: Renner RS Pro 22 screw compressor Refrigerant dryer Accessories as per scope of delivery Condition: Used - but with few operating hours - see photo Oil change performed New drive belts Functional Signs of wear and tear consistent with age and use Ready for immediate use The machine will be inspected before sale. For used machines manufactured in 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sales and changes are subject to change. All information without guarantee.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Holzkraft / SCM Minimax FS 41e Jointer and Thicknesser The machine was manufactured in 2017 and is in exceptionally well-maintained condition. The solid cast iron tables are clean and show only minor signs of wear. Equipped with the proven Tersa cutterhead, the machine allows for quick blade changes and excellent planing results. The FS 41e is an ideal solution for carpentry shops, joineries, interior fitters, and demanding craft businesses that value precision and reliability. Technical data Manufacturer: SCM / Holzkraft Model: Minimax FS 41e Year of manufacture: 2017 Isdpfxjzdtp Rs Anwsth Machine number: available Planing width: 410 mm Jointer and thicknesser Tersa quick-change cutterhead Voltage: 400 V Frequency: 50 Hz Three-phase connection CE-compliant design Max. blade thickness: 16 mm Equipment Tersa cutterhead system Solid fence Large, precision cast iron tables Central thickness adjustment Digital thickness display Dust extraction connection Emergency stop switch Robust industrial design Very smooth and quiet operation Condition Very well-maintained overall condition Year of manufacture 2017 Cast iron tables in very good condition Tersa cutterhead without any visible damage Immediately ready for use Scope of delivery Holzkraft Minimax FS 41e Fence Tersa cutterhead Protective and operating devices as shown in the images Special features High-quality machine from SCM Professional design for daily workshop use Quick blade changes thanks to the Tersa system High surface quality when planing Space-saving combination of jointer and thicknesser Shipping possible for an extra charge! The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty will be excluded when sold to commercial customers. Technical data and equipment may vary. Errors, intermediate sales and changes reserved. All information without guarantee.

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, Year of manufacture: 1988 Cutting capacity: 5300 x 2200 mm Cutting thickness: 80 mm Horizontal cutting height: 2100 mm Built-in extraction device Manual or automatic feed: 11/17/22/33 m/min Machine width: 6300 mm Saw blade: 300 ø 7.5 HP motor Itjdpfoy Nyr Sjx Anwjh Digital measuring system horizontal and vertical Machine ready for immediate use Very good condition Ex-site Transport possible at extra cost! Due to the age of the used machine, warranty is excluded for commercial customers upon sale.

Condition: excellent (used), Year of construction: 1965, functionality: fully functional, Veneer Press JU 60 Press size: 2200 x 1200 mm Heating plate damaged (see photos), heating plate is functional Year of manufacture: 1965, heating 12 kW Itsdpfxjmhguao Anwjh Loading costs extra (forklift rental approx. €500) Transport available at additional cost!

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, Mobile extraction unit HA26 Itsdpfeypm Dtex Anwoh - 1000 m³/h air capacity - 220 Volt - Year of manufacture: 1985 - differential taxation Transport available at extra cost!

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Trumpf TruPunch 2020 Itodpfxjy S Adpe Anwjh

Condition: good (used), Year of construction: 2019, functionality: fully functional, For sale is a high-quality, all-in-one winter combination machine, type 5K 310-2600, manufactured in 2019. This machine combines several processing units in a compact design and is ideal for carpentry workshops, joineries, and demanding woodworking applications. The technical data has been taken from the nameplate. Technical data Manufacturer: Winter Holztechnik GmbH Type: 5K 310-2600 Year of manufacture: 2019 Itsdpfx Anjzfilwewjh Machine no.: 201904001 Weight: approx. 575 kg Voltage: 400 V / 3 phases / 50 Hz Jointer and Thicknesser Motor power: 2.8 kW Planing width: 310 mm Knife shaft Ø: 70 mm 3 knives Knife shaft speed: 4,800 rpm Removal rate (jointing): max. 4 mm Removal rate (thicknessing): 2 mm Feed speed: 6 m/min Jointing table: 1,380 × 310 mm Thicknessing table: 540 × 306 mm Max. feed height: 235 mm Sliding Table Circular Saw Motor power: 3.8 kW Saw blade Ø: 315 mm Main saw blade speed: 4,500 rpm Cutting width with parallel fence: up to 860 mm Sliding table: approx. 1,260 mm Blade tilt: 90°–45° Spindle Moulder Motor power: 2.8 kW Spindle diameter: 30 mm Working height: 100 mm Speeds: 1,800 / 3,000 / 6,000 / 9,000 rpm Mortising Machine Drill chuck: 16 mm Drill stroke: 140 mm Table size: 500 × 210 mm Max. workpiece length: 1,250 mm Equipment Spindle Moulder Jointer and Thicknesser Mortising Machine Sliding table Angle and parallel fence Compact multi-function machine for space-saving work Transportation possible for an extra charge! Note The machine will be inspected before sale. For used machines manufactured in 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sale and changes are subject to change. All information without guarantee.

Condition: excellent (used), Year of construction: 2018, operating hours: 15,418 h, functionality: fully functional, travel distance X-axis: 1,520 mm, travel distance Y-axis: 1,150 mm, travel distance Z-axis: 245 mm, rapid traverse X-axis: 22 m/min, rapid traverse Y-axis: 22 m/min, rapid traverse Z-axis: 22 m/min, feed length X-axis: 1,520 mm, feed length Y-axis: 1,150 mm, feed length Z-axis: 245 mm, feed rate X-axis: 22 m/min, feed rate Y-axis: 22 m/min, feed rate Z-axis: 22 m/min, controller manufacturer: Datron, controller model: Datron Next, workpiece length (max.): 1,500 mm, workpiece width (max.): 1,000 mm, workpiece height (max.): 200 mm, total height: 1,970 mm, total length: 2,420 mm, total width: 2,280 mm, table width: 1,000 mm, table length: 1,500 mm, rotational speed (max.): 40,000 rpm, overall weight: 2,500 kg, spindle speed (max.): 40,000 rpm, operating hours of spindle: 8 h, spindle motor power: 3,000 W, spindle nose: HSK-E25, number of spindles: 1, number of slots in tool magazine: 12, input voltage: 400 V, type of input current: three-phase, For sale is a Datron MLCube high-speed milling machine, *manufactured in 2018, in very good condition and fully operational*. The machine is currently in continuous production use and can be inspected and demonstrated under power by appointment. The absolute highlight of this offer is the *high-frequency spindle, which was recently replaced and has only 8.10 hours of runtime – practically a brand-new spindle*. The next scheduled machine maintenance is not due until after approximately 1,243 additional operating hours, saving the buyer immediate maintenance costs. The Datron MLCube combines the precision and rigidity of a vertical machining center with the agility and compact footprint of a gantry milling machine. With a machining area of 1,500 × 1,000 mm and a small footprint, it is ideal for large-format sheet metal processing. The modern Datron Next control system with a 24" touch display enables intuitive operation and quick setup times. *COMPLETE TECHNICAL DATA & EQUIPMENT* Manufacturer: Datron AG, Ober-Ramstadt Model: MLCube Year of manufacture: 2018 Condition: Very good – well-maintained, in continuous production Control system: Datron Next (24" Multi-Touch Display + Handheld Control Panel B10-2) Spindle: 3 kW HF spindle, HSK-E25, 40,000 rpm Spindle runtime (new spindle): 8.10 hours – practically brand new! Total machine runtime: 15,418.17 hours Next maintenance due in: 1,243.30 operating hours (interval: 2,000 h) Travel (X × Y × Z): 1,520 mm × 1,150 mm × 245 mm Machining area: 1,500 mm × 1,000 mm × 200 mm Feed rate / Rapid traverse: up to 22 m/min Tool changer: 12-position, HSK-E25 (expandable to 24 positions) Tool holder: Schunk Tribos collet chuck incl. clamping device Lubrication: Minimum Quantity Lubrication (MQL), 5-liter ethanol tank + 5-liter reserve tank Measuring technology: Renishaw 3D workpiece probe with camera Clamping system: Vacuum table incl. vacuum pump Machine table: Mineral casting (vibration-damping, thermally stable) Installation dimensions (W × D × H): 2,420 mm × 2,280 mm × 1,970 mm Weight: approx. 2,500 kg Power connection: 3 × 400 V, 50 Hz Iedpjzdrursfx Anwjth *AREAS OF APPLICATION* Electronics industry: Front panels, housings, membrane keyboards, PCB milling, test adapters Aerospace: Aluminum sheet and profile machining Advertising technology / Trade fair construction: Sign machining, profile machining Medical technology: Precision parts, fixtures Automotive supplier industry: Precision CNC machining Printing industry: Hot stamping dies, embossing tools General: Prototypes, contract manufacturing, aluminum, non-ferrous metals, plastics, composites *TERMS OF SALE* Price: 150,000 € net (plus 19% VAT) – fixed price New price of the machine: approx. 200,000 € Inspection: Under power – possible by appointment Dismantling / Transport: By the buyer (crane loading possible upon agreement) Invoice: A regular invoice will be issued Warranty: None (commercial sale with exclusion of liability for defects) Reason for sale: Strategic shift to steel machining – new purchase planned If you are interested or have any questions, please do not hesitate to contact us. Inspection under power is possible at any time by appointment. Ernst Neumärker GmbH & Co. KG Lohstraße 13 58675 Hemer

Condition: good (used), Year of construction: 1998, functionality: fully functional, BGU clean air unit type RLG 1000, H2-certified, B1 design, 400 Volt, 1.95 kW, 730 m³/h, weight 150 kg, machine dimensions 1150 x 650 x 1400 mm. Transport possible at extra cost! Iodsxf E Hkopfx Anwjth

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, For sale is a high-quality panel saw, the Holzkraft Minimax SC 4 Elite, from SCM. The machine is in very good condition and is ideal for carpentry shops, joineries, and demanding interior design work. The robust industrial design impresses with its precise cutting, smooth-gliding sliding table, and proven SCM technology. Technical data: Manufacturer: Holzkraft / SCM Minimax Type: SC 4 Elite Itodpezdyngofx Anweh Year of manufacture: 2014 Voltage: 400 V / 3 phases Motor power: 5.0 kW Saw blade diameter: 250 – 315 mm Main saw blade bore: 30 mm Scoring saw blade: Ø 120 mm Scoring saw blade bore: 20 mm Scoring saw included Machine weight: approx. 810 kg Equipment: Aluminum sliding table Extension frame with stop Parallel fence Scoring device Push stick Clamping device Operating tools Dust extraction connection Scope of delivery: Holzkraft Minimax SC 4 Elite Extension frame Parallel fence Accessories as shown in the images Transport is possible for an additional charge! The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sale, and changes are subject to change. All information is without guarantee.

Condition: like new (used), functionality: fully functional, Year of construction: 2023, machine/vehicle number: 152-026710, overall weight: 3,000 kg, total height: 5,593 mm, total width: 1,340 mm, load capacity: 5,000 kg, power: 4.63 kW (6.30 HP), main lifting speed: 4,000 mm/min, fine lifting speed: 12 mm/s, throat depth: 4,000 mm, working height: 4,500 mm, operating hours: 20 h, Equipment: documentation/manual, 5 t pillar-mounted slewing crane with electric hoist and electric slewing drive Manufacturer: ABUS Kransysteme GmbH Type: VS 660 pillar-mounted slewing crane with electric chain hoist / wire rope hoist GM 1000.5000 H-162.41.6000.6.E130.20 Year of manufacture: 2023 Serial No.: Crane: 152-026710 Trolley: 250-123870 For sale is a like-new pillar-mounted slewing crane with a lifting capacity of 5,000 kg and a reach of 4,000 mm. The system was put into operation at the end of 2023 and has only been used very little. According to the available remaining useful life calculation, only 20 operating hours have been recorded up to April 2025, resulting in a remaining reserve of approximately 1,598 hours or a projected remaining useful life of over 30 years. The crane features an electric slewing drive, an electric trolley, and a two-stage hoist. Operation is conveniently performed via a pendant control. The system is equipped with a load indicator system (LIS-SV), upper and lower hoist limit switches, and the associated inspection and conformity documents. Scope of supply: * Complete pillar-mounted slewing crane * Electric slewing drive * ABUS trolley * ABUS wire rope hoist * Load hook 5 t * Crane inspection book * Declaration of Conformity * Remaining useful life calculation * Existing technical documentation Condition: Used, very good condition, low operating hours, regular inspection records available. System is visually and technically well-maintained. Photo of the assembled system is available. Location: Dresden Loading: Loading onto a suitable transport vehicle is included in the purchase price. Inspection: An inspection of the system is expressly desired and possible by appointment. Technical documents and further images can be provided upon request. Subject to prior sale and errors. * Lifting capacity: 5,000 kg * Reach: 4,000 mm * Crane type: VS 660 * Pillar diameter: 660 mm * Underside of boom: 4,983 mm * Hook travel: 6,000 mm * Crane classification: H2 / B3 * Hoist motor group: 2m / M5 * Operating mode: Indoor operation * Slewing drive: electric, two-stage * Slewing speed: 0.15 / 0.60 rpm * Hoisting speed: 0.7 / 4 m/min Itjdpfszd Sqajx Anweh * Trolley travel speed: 5 / 20 m/min * Operating voltage: 400 V / 230 V, 50 Hz * Total connected load: 4.63 kW * Total current consumption: 12.07 A * Load indicator system: LIS-SV * Hook: Single hook DIN 15401, 5 t * Weight of boom: approx. 869 kg * Weight of pillar: approx. 872 kg * Weight of trolley: approx. 356 kg * Total weight of system: approx. 2,100 kg

Condition: good (used), Year of construction: 2021, functionality: fully functional, Multifunction machine minimax cu 410 F 26 TERSA Multifunction machine minimax cu 410 F 26 with TERSA cutterhead, Year of manufacture 2021, 30 mm spindle arbor, Miter cutting device and pivoting milling spindle, ø 315 mm main saw blade, Saw unit with double pivoting segment guide, Scoring device can be retrofitted, Rip fence 1115 x 335 mm, Saw unit can be pivoted from 90° to -45°, Right-hand/left-hand rotation of the milling spindle, Separate saw parallel guide and tenoning guide, Planer table 410 x 1810 mm, Chip removal 5 mm, Itjdpfx Anjyz Sdwswoh 3 dust extraction ports, ø 120, Thicknessing table 775 x 410 mm, Working height for thicknessing 3 - 230 mm, 400 V, 50 Hz, 5 kW, Format sliding table 2660 x 360 x 142 mm, Table 1250 x 430 x 900, Weight 560 kg Transport possible for an extra charge.

Condition: like new (used), Staff Ice System BTX150 Ice Cube Machine / Ice Maker 150 kg/24h Year 2022 Technical Specifications Gelato BTX150 A Staff Ice System ice machine for the production and storage of ice cream. Designed for manufacturing and storing ice cream. Automatic extraction. Stirrer with durable polyethylene blades. The double lid allows ingredients to be added during the process. Vertical tank for complete control of the production process. 50 customizable operating programs. Technical features: Maximum ice cream production per cycle: 2 liters. Ice cream production: 15 l/h. Dimensions: 43.5 x 59.2 x 59.5 cm. Itsdpfx Anoyzc Rusweh

Condition: ready for operation (used), For sale: original Hanomag R35/45. Please submit your offer! Drives well, has no oil leaks, MOT is expired but can be renewed at additional cost. Price negotiable. The vehicle was always stored indoors. Now available for sale. Year of manufacture: 1956, with rare features and a functional Roots blower increasing output to approx. 45 hp. This machine is a technical one-off and is in very good, working condition. Equipment & details: • Type: R35/45 A (agricultural tractor version) • Engine: 4-cylinder diesel engine with mechanically driven Roots blower. Many original stickers and type plates on the machine. Output: approx. 45 hp • Transmission: 5 forward gears + 1 reverse, plus additional reduction (total 10 gears) • Year: 1956 • Rare: Front auxiliary PTO/extra PTO shaft via separate lever • Runs, steers and brakes flawlessly, starts reliably Condition: • Very good overall technical condition • Original appearance with lovely patina • Complete dashboard, inscriptions, lighting, etc. No improvised repairs – all mechanically robust • Ideal as a collector’s item, for vintage meetings or for enthusiasts. Rarity & value: • The Roots blower was only installed in a few models or by Hanomag authorized workshops for power increase. • Such authentic vehicles with working blower and special equipment are extremely rare. Subject to errors. Pictures/description may vary. Itedpfxswvf E Ds Anwsh

Condition: used, Year of construction: 2008, functionality: fully functional, MEBAeco 335 A Bandsaw Machine Technical Specifications Type: Straight cut 90° Sawing process: NC automatic Automation: Automatic series cutting Cutting range: Round material at 90°: Ø 335 mm Flat material at 90°: 500 × 335 mm Drive power: 3 kW Saw blade: 4400 × 34 × 1.1 mm Maximum load weight: 250 kg/m Itedezdlx Dopfx Anwsh Year of manufacture: 2008 MEBAeco 335 A bandsaw machine, year of manufacture 2008, for automatic series cutting. Cutting capacity up to Ø 335 mm or 500 × 335 mm. Equipped with NC control, 3 kW drive, and saw blade 4400 × 34 × 1.1 mm. Maximum material load 250 kg/m.

Condition: good (used), Year of construction: 2000, For sale is a used carton sealing machine (tape sealer) from Cyklop. The machine is ideal for automatically sealing cartons with adhesive tape (top & bottom) and can be easily integrated into existing packaging lines. Typical applications: * Shipping / Logistics * Warehousing & Fulfillment * Production / Packaging lines ⸻ ⚙️ Technical Information * Suitable for tape width approx. 50 mm * Carton size adjustable (width & height) * Integrated conveyor belt * Robust industrial-grade construction * Suitable for continuous operation 👉 Comparable models operate at approx. 20–23 m/min conveyor speed in newer versions Itedsy Hf Slepfx Anwsh ⸻ 📦 Condition * Used, reflecting its age * Visual condition as shown in photos * Function: (insert here: running / untested / tested) ⸻ 📐 Advantages ✔ Fast and clean carton sealing ✔ Time savings compared to manual work ✔ Ideal for medium to high volumes ✔ Proven industrial quality by Cyklop

Condition: good (used), Well-maintained, lightly used crawler dumper. The machine has been thoroughly inspected and disassembled by a machinery company and has also undergone maintenance. The dumper is equipped with new tracks and a one-year-old engine. The dumper has a total of 3500 operating hours on the meter, meaning when the ignition is on. No running hours. Transport dimensions: length 1.92 m, width 75 cm, height 1.89 m. Weight: 640 kg. €6000, including a margin invoice. Trade-in and delivery are possible. Ijdpfxjy Uwg Ds Anwjth

Year of construction: 2007, condition: used, machine/vehicle number: IntNr231611, CNC lathe NILES-SIMMONS N30/3 - 3500, year of manufacture 2007 High-precision, double-sided, heavy-duty machining 2 spindles, 2 turrets Technical details & performance data Control system: Siemens Sinumerik Si 840D Max. turning length (nominal length) 3,500 mm Swivel diameter over bed approx. 780 mm Swivel diameter over slide approx. 720 / 750 mm 1st and 2nd spindles Max. spindle speed up to 3,000 rpm (variable) Drive power (S1-100% / S4-40%) approx. 64 kW / 78 kW Max. torque up to 3,135 Nm Tooling system Itedpfx Ansza D E Nswoh Tool holder / turret 12-station / 16-station turret (VDI 50 / 60 or axial/radial) Travel ranges & dynamics X-axis -12 to +423 mm Rapid traverse speeds (X / Z) 18 / 30 m/min 2 x NC-controlled steady rest slides for optimum support High-performance articulated belt chip conveyor with coolant system Documentation, circuit diagrams and CE certificate The machine can be inspected by appointment. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: used, Year of construction: 2005, operating hours: 40,300 h, machine/vehicle number: IntNr231576, A used AXA VSC-1M/2E CNC vertical machining center, manufactured in 2006 and equipped with a HEIDENHAIN iTNC 530B CNC control, is for sale. Technical data Design: Moving column machine Number of axes: 3 axes Machining operations: Milling, drilling, threading Operating mode: CNC operation Swivel machining Tool holder: SK 40 Tool magazine Chip conveyor Coolant system X-axis travel: 1,760 to 9,000 mm Y-axis travel: 550 mm Z-axis travel: 600 mm Distance from table to spindle nose: 180 to 780 mm Table surface: Ijdpfx Aozatgponweth X-travel + 400 mm x Y-travel, 3 T-slots 14 H9, T-slot spacing 160 mm Table load: 800 kg/m² Rapid traverse: 30 m/min The standard tool changer has 22 tool positions; optional extensions up to 216 tool positions are possible. Tool change time: approx. 4 seconds. The machine can be inspected by appointment. Subject to changes and errors in the technical data and specifications, as well as prior sale.

Condition: used, Year of construction: 2005, machine/vehicle number: IntNr231574, Machine Specifications Control: MORI SEIKI MSX-850 Design: Slant-bed turning center Version: SY with Y-axis Turret: 12-position with driven tools Working Area Max. turning diameter: 356 mm Standard turning diameter: 275 mm Max. turning length: 705 mm Traverse Travels X-axis: 260 mm Y-axis: ±50 mm / total approx. 100 mm Z-axis: approx. 795 mm Rapid traverse X/Y/Z: 30 m/min Ijdpfjy U Hi Iex Anweth Counter spindle LNS Quick Load Servo 2 bar feeder Max. bar length: approx. 1,500–1,600 mm / 63" The machine can be inspected under power by appointment. Specifications and technical details are subject to change and error. Prior sale reserved.

Condition: used, Year of construction: 2012, machine/vehicle number: IntNr231474, KEYENCE Model Series IM-6020, Year of Manufacture 2012 For sale is an optical measuring machine, KEYENCE IM-6020, in good, fully functional condition. The IM series is recognized for fast, high-precision, and operator-independent measurement, making it ideal for use in quality assurance, goods-in inspection, and production monitoring. Technical specifications (overview): Model: IM-6020 Year of manufacture: 09/2012 Measuring principle: Optical / non-contact Measuring range (X/Y): approx. 200 × 200 mm Measuring range (Z): Height measurement via autofocus Measuring accuracy: up to approx. ±2 µm (depending on measurement conditions) Repeatability: Very high, operator-independent Camera: High-resolution CCD camera Illumination: Incident light / transmitted light / contour illumination Itedpfx Anjy U Hhqowjh Measuring functions: - Length, angle, radius, and diameter measurement - Contour and form measurement - Comparative measurement (OK/NOK) - Automatic dimension recognition Software: KEYENCE IM software for quick program creation Measuring time: A few seconds per component (even for multiple features) Condition: - Used - Well maintained - Fully operational - Ready for immediate use Machine dimensions: approx. 900 x 500 x 1500 mm Machine weight: approx. 32 kg The machine can be inspected by appointment. Subject to prior sale and changes or inaccuracies in the technical data and specifications.

Condition: used, Year of construction: 2006, machine/vehicle number: IntNr231573, A used MORI SEIKI NL 2500/1250 CNC lathe, year of manufacture 2006, is available for sale. The machine is equipped with a MORI SEIKI MSX 850III / MAPPS III control system and an IRCO SIMAG bar feeder for automatic bar loading. Technical data Control: MORI SEIKI MSX 850III / MAPPS III Origin: Japan Design: Slant-bed CNC lathe Centre distance: 1,250 mm Maximum turning length: 1,298 mm Maximum turning diameter: 356 mm Standard turning diameter: 275 mm Swing diameter over bed: 923 mm Itjdpfsy U Hg Tox Anwoh X-axis travel: 260 mm Z-axis travel: 1,345 mm Spindle speed: up to 4,000 rpm Spindle bore: approx. 80 mm Turret: 12 stations Number of turrets: 1 Chip conveyor Driven tools C-axis Y-axis Machine weight: 7,600 kg Machine dimensions (L x W x H): 5,000 x 2,300 x 2,400 mm The machine can be inspected under power by prior appointment. Technical data and specifications subject to change and error. Sale subject to prior sale.

Condition: used, Year of construction: 1980, For sale is a robust mechanical eccentric press / stamping press from the manufacturer MGR. The machine is ideally suited for punching, forming, and pressing operations in the metalworking industry and comes from industrial use. Isdpfsy Unmbex Anwoth Technical data: Manufacturer: MGR Type: 45R Year of manufacture: 1980 Pressing force: 45,000 kg (45 tons) Stroke: 230 mm Ram stroke: 80 mm Ram adjustable: 55 mm Adjustable stroke: 9 – 120 mm Motor power: 3.5 hp Voltage: 380 V Machine no.: 311860

Condition: good (used), Year of construction: 1994, For sale is a hydraulic press from the manufacturer Lauffer Pressen. Itsdpfx Aoy Ufqksnwsh Technical data: Manufacturer: Lauffer Pressen GmbH & Co. KG Type: VSK 0125 Year of manufacture: 1994 Machine number: 10248/14292 Control system: conventional Condition: used, functional Application area: pressing, forming and shaping operations Equipment: Hydraulic press Control panel with displays and controls Safety controls Robust steel construction The machine comes from ongoing production and is in used condition with normal signs of wear and tear consistent with its age. Inspection possible by appointment.