Used Top Head Boring Machine for sale (72,767)

Year of construction: 2007, condition: excellent (used), I sell the top multiple boring machine Detel M-13, year 2007. 3-spindle. Motor Perske 2,0kW Very good condition. Kjdpfjhua Rpjx Ai Redr Available immediately.

Condition: excellent (used), Year of construction: 2011, I sell the universal top multiple boring machine with milling for repair works Plug Repair RILESA Rep.-Borem., year 2011. 4 Top drilling spindles 1 Grooving moulding head Very good condition. Kedju N T Skepfx Ai Rsdr Available immediately.

Year of construction: 1994, condition: excellent (used), I sell the back side multiple boring machine Detel M1-9, year 1994. 9-spindle x 32mm. Motor 1,1kW Kedpfxjk Iy Hbe Ai Rjdr Very good condition. Available immediately.

Condition: new, Year of construction: 2025, operating hours: 24 h, functionality: fully functional, DOLFİN-PYM2 series parts washing machines are industrial purposed parts cleaning devices that are used before and after revision, particularly in repair and maintenance services. Kodpfx Aisv Sa I Tj Redr While the parts that are placed in the device are rotated on their own axis by means of the washing basket, pressurized detergent hot water is sprayed. With the pressure, temperature and chemical effect, all oil and contamination on the part is cleaned. Since Dolfin Parts washing machines operate as closed loop, new water and new detergent are not used every time. While washing is performed for several times with the same tank, all the dirt remains in the washing cell. With this feature, it protects both nature and employees. Due to its high efficiency and performance, saves energy, water and labour. It works automatically in accordance with the temperature and time values that are set during operation. In order to load, particularly the heavy items into the washing basket or to remove them from the basket, the washing basket can be taken on a carrier trolley, in other words, from the device when required. It can be transferred to any point of the workshop with this trolley.

Condition: excellent (used), TBT T30 SERIES TABLE TYPE GUN DRILLING MACHINE Model T30-1000KTN Serial number 410.364.016 Year of manufacture, approx. 1980 Number of spindles 1 Drilling range in steel 4 - 30 mm (solid) Counter boring 40 mm Nominal drilling depth 1000 mm Slotted table size 850 long x 750 wide mm Table size overall 1100 long x 1000 wide mm Table cross movement 800 mm (approx.) Table vertical movement 400 mm (approx.) Drilling slide longitudinal travel 1450 mm Slideway width 250 mm Spindle speeds to approx. 9000 rpm Spindle motor 25 kW Total load 41 kW Supplied with: 2 off Whip guides. Ballscrew feed. 2 Axis DRO to table Cross and Vertical, DRO to drill slide. TS25-1000 Coolant tank. Drill bushes. For Sale with Jet Machinery Ltd Jet Machinery Stock No: #27033 Machine Serial Number: 410 364 016 Cost: £17,500.00 + VAT Kdedpfxezuxp Rj Ai Rer Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 2013, functionality: fully functional, operating hours: 334 h, power: 17.5 kW (23.79 HP), input voltage: 400 V, input current: 31 A, input frequency: 50 Hz, type of input current: three-phase, total height: 1,600 mm, total length: 6,600 mm, total width: 1,250 mm, overall weight: 2,900 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, We are offering this used OTT TORNADO-TOP edge banding machine, manufactured in 2013. Kdedpfx Aiezvqclo Rjr Type: TORNADO-TOP Year of manufacture: 2013 Power supply: 3~ N+PE Frequency: 50 Hz Rated voltage: 3×400 VAC Rated current: 31 A Rated power: 17.5 kW cos φ: Control voltage: 24 VDC Maximum fuse rating: 35 A Conductor cross-section: 5×6 mm² If you have any questions or require further information, please send us a message or call us.

Condition: new, CNC Machining Center Manufacturer: COMEC Type: MD TOP XL The ideal solution for CNC machining of narrow, complex workpieces. COMEC makes it easy for you. Head configurations can be individually configured for: - Sawing with a 360-degree axis - Milling heads for horizontal and vertical machining - Drilling heads with individually selectable spindles, vertical and horizontal - Multi-spindle row drilling heads, individually selectable, also horizontally - Horizontal milling head with a 360-degree C-axis Specially designed clamping table, travels in the X direction automatically and is program-controlled. Individual equipment options are available, for example: Base frame Heavy-duty base machine stand, electrically welded. Maximum workpiece sizes: X-axis 3350 mm (or 1500 + 1500 mm in two working areas) Y-axis 200 mm Z-axis 180 mm Traversing tool carrier 3 axes CNC controlled. Linear and interpolating. Positioning speed of the tool carrier max. 70 m/min. Vertical drive spindles 1 drive spindle for 1 drilling head with individually selectable drilling spindles Kdodszvgl Nopfx Ai Rer 5 vertical drilling spindles, spacing 32 mm 3 horizontal double-output spindles on the Y-axis, spacing 32 mm 3 horizontal double-output spindles on the X-axis, spacing 32 mm 1 Vertical milling electro-spindle 8.0 KW, 12,000/18,000 RPM. Tool holder ISO 30 taper + ER 32 collet for manual tool change with quick release. 1 Milling / Sawing / Drilling spindle With motor 7.0 KW, 8,000 - 12,000 RPM. 360 C-axis, interpolating With attachment with 180 double output for saw blade and drilling/milling tool Horizontal electro-spindle 1 Milling spindle With motor 5.6 KW / 12,000 - 18,000 RPM With ER 32 collet 4 + 4 workpiece supports Adjustable on guides with 4+4 pneumatic clamping cylinders, with 2+2 horizontal clamping cylinders and front and side stops. Automatic magazine CA 2 Adjustable on linear guides, fixed on the left (zero) With easy access for the operator and a high degree of autonomous operation. With coated discharge chute for the machined workpieces. CONTROL UNIT - CAD CAM Free-standing control cabinet next to the machine Industrial PC with operator interface with 17" color touchscreen. SSD 120 GB, interface: Ethernet USB / RS 232 Programming with 3-D supported display Option for network connection for programming and remote support. Remote control console for controlling the machine by the operator during tests and setup. PROTECTIVE CABIN Surrounded with solid sheet metal panels With front protective screens, controlled by the work cycle Chip conveyor With outlet to the right side, with motor 0.37 KW Connection 400 V / 50 Hz Find it quickly Offer machines Subscribe to newsletter Unsubscribe from newsletter Contact us Overview

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 60 rpm, feed rate X-axis: 1 m/min, total height: 1,750 mm, total length: 1,400 mm, total width: 1,250 mm, quill diameter: 60 mm, space requirement width: 1,500 mm, space requirement length: 1,500 mm, space requirement height: 1,800 mm, distance table center to spindle nose: 590 mm, spindle stroke: 130 mm, workpiece weight (max.): 400 kg, Equipment: rotational speed infinitely variable, Important note! No sales/shipments to India/USA/Canada. Payment for the machine must be made in full before loading, no partial payments or installments! HENRI HAUSER OP3, unique piece / excellent condition! (Bienne/Biel, Switzerland) Coordinate drilling machine / precision drilling machine with tool set (see photos) in very well-maintained, exceptional condition, second owner (41 years in current ownership). This quality will never be produced again! The coordinate drilling machine has the rare option of motorized table drive in the X and Y axes and potentiometers. This eliminates the need for tedious manual adjustment of individual coordinates over long distances with hand cranks. Furthermore, it has rare thermal stabilization and expansion compensation. Two heaters are provided for this purpose, which can and must be switched on separately before starting work and to maintain high accuracy and dimensions. This explains the factory-set high positioning accuracy of 0.002 mm with a resolution of 0.001 mm. What is unique is that the Hauser has two Heidenhain digital displays with a total of 4 glass scales with 1My resolution, also for the quill feed. This is a major advantage for precise drilling and machining at depth with Wohlhaupter, spindle tools, etc. With the mentioned options and in this first-class condition, it is very rare and most likely no longer available. Those familiar with these machines, which are primarily used in the watch industry, gunsmithing / defense industry, precision engineering, material testing, and the optical industry, know the value of these masterpieces of mechanical engineering. Also ideally suited for engine construction/overhaul, technical universities and training, materials technology, special machine construction, etc. All documents, manuals, electrical diagrams, etc. are, of course, available in their original form! Technical data: Table length 550 mm, table width = 320 mm, longitudinal travel X-axis = 400 mm, transverse travel Y-axis = 250 mm, vertical travel Z-axis = 400 mm Max. workpiece weight on the table = 400 kg, spindle mounting MK 2, stroke of the drilling spindle (Z-axis) = 130 mm Distance table to spindle = 590 mm, spindle speeds continuously variable from 60 rpm to 3000 rpm Feeds: Drilling spindle carriage: 2 stages from 0.03 mm/rev to 0.06 mm/rev Connection 50 Hz 3x 380 volts, spindle motor 0.80 hp Kdjdpfszuvwlsx Ai Rjr Machine dimensions: Length = 1400 mm, Width = 1250 mm, Height = 1750 mm Machine weight approx. 1500 kg. Shipping (direct transport without transshipment) within the EU is possible. Price net for export within the EU. Example: Secure shipping via direct transport (without transshipment!) to France/Spain/Italy etc. up to 1700 km driving distance approx. 1100 - 1450 EUR.

Condition: used, Year of construction: 2014, Drilling and dowel insertion machine Manufacturer: Weeke Kdsdpfx Aiozuyn Ij Rsr Type: OPTIMAT ABD150 Year of manufacture: 2014 Technical data Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2018, operating hours: 500 h, Throughfeed machining, workpiece machining from below, and automatic workpiece return to the operator. 3 controlled axes: X axis - uninterrupted workpiece transport via DDT (double dynamic transport system) with a brushless motor Y axis - drilling head travel Z axis - drilling - Double "0" reference: new laser generation for detecting the start and end of the workpiece. The program can adjust the drilling from below to achieve perfect alignment in vertical and horizontal workpieces. The laser consists of a transmitter and receiver to avoid errors with dark edge materials. - Side stops with rollers consisting of a fixed and a movable part, mechanical digital readout with automatic alignment to the 0 stop for removal of up to 3 mm on the 0 line - Constant side pressing device for precise positioning on the 0 line. - Rear workpiece outlet - Automatic 4-position tool changer - No workpiece length limitation - Monitor LCD TFT 19" 5/4 - Industrial PC - Operator interface WSC with Lister, parametric tool, and parametric setup - Graphical programming CAD TPA EDI32, basic version - USB port - Storage of all files - Macro programming - Import DXF files Technical data Number of independent, vertical spindles: 12 Number of independent, horizontal spindles on the X axis: (2+2) Number of horizontal drilling spindles on the Y axis: (2+2) 1 saw (Ø 100mm) Electric spindle 5 kW with ISO30 taper (RPM 12000-24000) Max. workpiece weight: 80 kg Max. workpiece dimensions: X unlimited, Y 1200 mm, Z 50 mm Min. workpiece dimensions: X 270, Y 185 (70op), Z 4 mm Feed rate: 25m/min Spindle speed: 3500 RPM Max. horizontal tool Ø 12mm Max. drilling depth horizontal on the X and Y axis 30mm Kdjdpfx Aijzuxdbe Rjr Max. drilling depth vertical: 45 mm Max. vertical tool Ø 35mm Air consumption 2000 m3/h Extraction speed 30 m/s Extraction nozzle 2xØ. 100mm + 1xØ.50 mm Motor: 1.7 kw Compressed air: 7 bar Max. air consumption: 60 nlt/min CE STANDARDS - Office software - license - Adjustable zero point for 4-sided formatting - CE compliant - Status: 05/28/2026: approx. 500 operating hours and a new PC has been installed.

Condition: used, Year of construction: 1996, Drilling head with 21 spindles, pitch 32 mm, working width: 640 mm, portal passage: approx. 750 mm, drilling stroke: 100 mm, positional adjustment of the drilling unit: 0-45 mm, positional adjustment of the hole pattern: 0-300 mm, spindle speed: 2800 rpm, shank diameter of the drill: 10 mm, clamping height of the workpieces: max. 100 mm, motor: 1.5 kW, working height: 850 mm, compressed air connection: 6 bar, weight: approx. 400 kg. Kdsdpfx Ajy Dd I Hsi Rjr Location: Nattheim.

Condition: excellent (used), Year of construction: 2009, URBAN AKS 6910/4 four-head welding machine, reading from right to left, maximum welding dimensions: 3,000 x 4,000 mm, Windows-based control system, weld bead control with a limit of 0.2 mm for colored profiles, previously operated in a single-shift mode, technically overhauled and fully functional. Ksdpfx Aiezu Nv Ie Rjdr

Condition: used, Year of construction: 2006, Solid drill diameter / mm bore depth / mm number of spindles / Froriep CNC deep hole drilling machine – the prefabrication specialist Year of manufacture: 2006 Control system: Siemens Sinumerik 840D Max. drilling depth: 8,850 mm Workpiece diameter: 150 – 900 mm Speed range: 1 – 300 rpm Feed rate: 0.5 – 4,500 mm/min Drive power: 129 kW Ksdpexgu R Iefx Ai Rsdr Swing diameter over bed: 1,000 mm Clamping diameter faceplate: 900 mm Weight: approx. 47,000 kg Ideal for precise pre-drilling of deep holes – including faceplate, steering ring

Condition: used, Year of construction: 1993, Control Sinumerik 805 turning speeds 45 - 6000 U/min Solid drill diameter / 0 weight of the machine ca. 20 t Type of machine: deep hole drilling machine Model / Type: TB 2 15 30001KT Year of construction: 1993 Manufacturer: hole Machine number: 221-3000-2093 Machine weight: approx. 20,000 kg Machine footprint: Width = approx. 3800mm Length = approx. 13500mm Height = approx. 3100mm Drilling length: approx. 3500mm Drilling capacity: drill 45mm / drill out 80mm Spindle speed range: 45 - 6000 rpm Control: Siemens Sinumerik 805 Hamül – coordinate table Type: KT 8.5 – 10.10 Clamping surface: approx. 1100 mm x 980 mm Travel: Y - axis: approx. 800mm Traverse path X - axis: approx. 500mm 7 pieces clamping - T - grooves: 18 mm Special equipment: 1 piece Fibroplan NC - rotary indexing table Type: NC 1.05 Permissible transport load in horizontal use 2500 kg With manual chuck Forkardt F 630 The NC rotary indexing table can be adjusted manually in the longitudinal and transverse directions relative to the clamping table and is clamped hydraulically. 1 piece chips - centrifuge Type: VZ5A from CEPA Drum capacity: 80 liters Loading weight max. 100 kg Drum - Ø: 600 mm Speed: 1000 rpm 1 additional pump for large drill Ø 1 piece Bosch radial piston pump no.: Kdsdpfevvx Hiex Ai Ror Suitable for lip drills (internal cooling, chips run outwards) Suitable for BTA drills with screw-on heads (internal cooling, chips run inwards)

Condition: used, Year of construction: 2006, Solid drill diameter / mm bore depth / mm number of spindles / 2-machine package: Froriep deep hole drilling machine & Irle finishing machine Perfectly matched duo for deep hole drilling and precise finishing of large workpieces A specialised machine package is available for sale – two perfectly matched systems for the complete machining of long, heavy workpieces with the highest demands on precision and efficiency. MACHINE 1 Froriep CNC deep hole drilling machine – the prefabrication specialist Year of manufacture: 2006 Control system: Siemens Sinumerik 840D Max. drilling depth: 8,850 mm Workpiece diameter: 150 – 900 mm Speed range: 1 – 300 rpm Feed rate: 0.5 – 4,500 mm/min Drive power: 129 kW Swing diameter over bed: 1,000 mm Clamping diameter faceplate: 900 mm Weight: approx. 47,000 kg Ideal for precise pre-drilling of deep holes – including faceplate, steering ring Kjdpouddimjfx Ai Redr MACHINE 2 Irle machine – high-precision finishing Power: 129 kW Control: Siemens NC control Speed range: 2 – 300 rpm (stepless) Feed: 3 – 4,500 mm/min (in steps) Centre distance: 11,000 mm Swing diameter over bed: 1,250 mm Clamping range of steady rests: 150 – 1,100 mm Workpiece length: up to 11,000 mm Workpiece weight: up to 10 tonnes Max. outer diameter: 850 mm With up to 50,000 Nm torque, perfect for smooth drilling, honing and demanding finishing processes. Your advantages at a glance - Complete solution from a single source – from pre-drilling to finishing - Large workpieces up to 11 metres and 10 tonnes in weight - High process reliability thanks to perfect machine synchronisation - Ready for immediate use, well maintained and from ongoing operation - Ideal for mechanical engineering, energy, oil & gas, hydraulics and large parts manufacturing

Condition: used, Year of construction: 2004, Solid drill diameter 200 mm bore depth / mm number of spindles / Technical data Power: 129 kW Control: Siemens NC control Speed range (stepless): 2 - 300 rpm Feed range (in steps): 3 - 4500 mm/min Oil system capacity: 20,000 litres Maximum delivery rate: 1500 l/min Circular diameter in steady rest: 1100 mm Circular diameter over bed: 1250 mm Centre distance: 11000 mm Clamping diameter face plate: up to 1100 mm Max. workpiece weight with one tailstock: 10 t Clamping range of the two steady rests: 150 - 1100 mm Clamping range BOZA: 1 = 200 - 400 mm 2 = 400 - 800 mm Dimensions Min. outer diameter: 406 mm Max. outer diameter: 850 mm Wall thickness: 10–150 mm Max. workpiece length: 11,000 mm Max. workpiece weight: 10 t Max. strength: 800 N/mm² Specific cutting resistance (Ks): 2000–2100 N/mm² Machine data Machine length: 28,800 mm Centre height: 560 mm Swing diameter over bed: 1120 mm Full drilling diameter: 200 mm Core drilling diameter: 350 mm Reaming diameter without drilling: 350 mm Reaming diameter with drilling: 350 mm Headstock: Main drive motor: Siemens Type: 1 PH 7228 Performance data at 1,000 min: 113 kW / 1,079 Nm Performance data at 1,150 min: 129 kW / 1,017 Nm Main gearbox: Z-F manual gearbox Type: 2 K210 Switchable gear ratios: i = 1:1 i = 1:4 Kdedpfexgic Eex Ai Rer Fixed gear ratio for spindle: i = 11.68 Max. torque: 50,000 Nm Speed range I: 2...300 min Speed range II: 2 ...75 min

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 0-253-73-2182, total width: 1,503 mm, total length: 3,204 mm, total height: 1,900 mm, type of input current: three-phase, overall weight: 1,750 kg, rotational speed (max.): 24,000 rpm, spindle speed (max.): 7,500 rpm, input voltage: 400 V, workpiece height (max.): 80 mm, working width: 1,250 mm, number of spindles: 10, input frequency: 50 Hz, input current: 20 A, workpiece length (max.): 1,250 mm, workpiece width (max.): 800 mm, Equipment: rotational speed infinitely variable, We are offering this ex-demonstration machine, a HOMAG DRILLTEQ D-510 dowel drilling machine, manufactured in 2024. It is currently located in our showroom in AT-4894 Oberhofen am Irrsee. Machine type: DRILLTEQ D-510 OPTIMAT ABD210/12/B/D/F Machine number: 0-253-73-2182 Year of manufacture: 2024 Dowel drilling and milling machine with 5 horizontal and 5 vertical drilling spindles, dowel insertion unit 8mm, as well as a horizontal and a vertical milling spindle (24000 revolutions, 4kW). Kdodpfx Aiezvnk To Rer Processing length 1250mm, with the possibility of overhang if required. Maximum workpiece thickness 80mm, minimum thickness 10mm. Automatic adjustment of the clamping beam height. Hands-free barcode scanner. IntelliGuide operator guidance system. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Radial drilling machine REFORM, type RB 50-16 Year of manufacture: 2002 Drilling capacity in steel: max. 50 mm Kedpfx Ajzupamji Redr Tool holder: MK 5 Nominal overhang: 1600 mm Maximum overhang of the spindle to the column: 1600 mm Maximum overhang of the spindle to the column base: 1500 mm Minimum overhang of the spindle to the column: 340 mm Minimum overhang of the spindle to the column base: 240 mm Travel of the drilling head: 1260 mm Height adjustment of the arm: 600 mm Distance between clamping surface and drilling quill: max. 1100 mm Spindle speed: 25-2000 rpm Quill stroke: 300 mm Quill diameter: 80 mm Feed rate: 0.04 to 3.2 mm/rev (16 steps) Clamping surface of the base plate: 1750 x 980 mm (1650 x 840 mm) Column diameter: 350 mm Motor power, spindle drive: 4 kW Mains connection: 400 volts, 50 Hz - Spindle speed controlled via 16 gear stages with speed preselection and hydraulic gear shifting - Right and left rotation of the drilling spindle - Automatic feed via 16 gear stages with feed rate preselection and hydraulic gear shifting - Electro-mechanical height adjustment of the arm, with hydro-mechanical arm clamping - Hydro-mechanical central clamping of the head and column via push buttons - Coolant system in the machine base Machine height with drilling head at the top: max. 2840 mm Space requirement L x W x H: 2400 x 1000 x 2650 mm Weight: 3.5 tons Good condition

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: 1028 161, drilling depth: 75 mm, total width: 900 mm, total length: 1,200 mm, overall weight: 430 kg, spindle speed (max.): 2,800 rpm, drill spindle length: 800 mm, workpiece height (max.): 80 mm, number of spindles: 23, operating pressure: 6 bar, GANNOMAT COMBI 110 Dowel and multi-hole drilling machine Kdsdpfx Aijzvm Hae Rjr including stops READY FOR USE

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, Linear Weigher: Gentle and Precise Filling Technology Our linear weigher is the ideal solution for simple and accurate dosing and filling of products. It seamlessly combines precision with gentle handling. Thanks to the minimal drop height, product damage is effectively avoided, ensuring the quality of your goods, even with sensitive items. Flexible and Efficient Operating Principle The core of our technology is a simple yet highly effective operating principle: Products are conveyed via linear belts or vibratory feeders and precisely dosed into the weighing bins. Features: - Easy operation and cleaning - Convenient control via color touch screen - Memory for different weighing recipes - Precise weighing results through three-stage weighing (coarse / medium / fine), each stage individually programmable - Tool-free format change - Intuitive design enables quick changeover and easy cleaning - Gentle handling: minimal drop height protects delicate and fragile products Kdjdpfx Aijyazywj Rer - Versatile: flexible use in both food and non-food sectors - Accurate dosing ensures consistent product quality - Robust and hygienic: parts made from 304 stainless steel, easy to clean - Compact design and durable construction save space and reduce maintenance effort With our linear weigher, you receive a reliable, precise, and hygienic solution that enhances the efficiency of your production processes. Technical data - Weighing range: 20g to 2,000g - Accuracy: up to 1g, depending on product - 4.5-liter weighing bin - Max. speed: 30 weighings/minute (double-head weigher) - Material: stainless steel 304 (V4A / 316 on request) - Connection: 220V / 50Hz / 6A

Year of construction: 1987, condition: ready for operation (used), A complete Wagner WBX 1003 boring mill is available. Control: CNC Systems WB 1000, documentation is available. Kdjdpfx Aottv Uaei Ror

Year of construction: 2011, condition: ready for operation (used), A horizontal dual-head corner cleaning machine Stürtz for the simultaneous machining of two 90° internal and external corners on welded plastic windows is available. Tool stations top/bottom: 8/8, min. product dimensions X/Y without mullion machining: 320mm/370mm, min. product dimensions X/Y with mullion machining: 640mm/370mm, min. frame internal dimension X/Y: 180mm/180mm, max. frame dimensions X/Y: 4000mm/3000mm, installation depth range: 30mm-135mm, profile visible width range: 25mm-120mm, equipment: 4 gasket groove drilling units/4 internal corner measuring devices/4 shadow groove cutters/2 external contour units. Including various accessories and tools. Documentation available. An inspection on site is possible. Kjdeyn N Apopfx Ai Rodr

Condition: used, Year of construction: 2009, spindle diameter 125 mm x-travel 1.500 mm y-travel 1.250 mm z-travel 1.000 mm w-travel 550 mm table surface area 1.000 x 1.250 mm Ksdewdta Ejpfx Ai Rjdr workpiece weight 6.000 kg quill stroke 550 mm tool taper ISO 50 number of spindle speeds 5-3.700 U/min. max. torque 2012 Nm feed speeds 1-6000 (x-Achse) mm/min feed speeds 1-6000 (y-Achse) mm/min feed speeds 1-6000 (z-Achse) mm/min rapid traverse x/y/z 15/ 15/ 15 m/min dimensions of the machine ca. 7,51 x 5,07 x 3,33 m 63 kVA Equipment/ Accessories: - CNC control Siemens 840 D - 60 ATC - Coolant system with high-pressure pump 30 l/min.- 20 bar - documentation

Condition: excellent (used), functionality: fully functional, Swivel spindle milling machine KÖLLE F 45 in very good condition; this machine comes from an assembly company and has been idle for the last few years, as it was no longer needed. Everything functions perfectly. All bearings and guides are in good condition; the machine runs very smoothly. Year of manufacture: 1990 with control panel on top Both fence jaws on the milling fence can be adjusted in depth, with fine adjustment and scale, allowing for planing work, e.g., on a gluing profile. The entire milling fence can also be adjusted in depth using a handwheel and a leadscrew, enabling very precise and fast adjustments. with AIGNER integral fence with spindle locking lever Chips can be removed very effectively with 2 extraction ports, 125 mm on the milling fence and 100 mm on the machine table. with 30 mm spindle, which can be swiveled steplessly from -5 to 45°; the spindle is swiveled electrically with a very precise display; fine adjustment can be made manually with a handwheel. The height adjustment is also electric, and a handwheel is also available for fine adjustment. with right/left rotation We will personally deliver and demonstrate the machine anywhere in Germany for €220.00, so you have no risk when purchasing; shipping to Austria and the rest of the EU is also possible upon request. with a large table opening of 375 mm, which can be reduced by using various rings (this allows for the use of cutters with a very large diameter, and you can also safely mill with small cutters). with 3000, 4000, 5000, 6000, 8000 and 10000 rpm the table is made of heavily ribbed cast iron with 30 mm spindle in the machine; another spindle can also be installed very robust and durable design; the machine was built for heavy-duty milling operations and is suitable for all milling applications. optimal power transmission through belt drive with instruction manual with 3-roller feed system HOL HER, type ET 117 the feed system has right/left rotation and 8 speeds; the feed rollers are individually mounted and are all in new condition. the machine table is 1000 mm deep and 1200 mm wide; it has an extendable support table 1200 mm long. the machine is ready for immediate use. 380 V, 4700 and 5700 W due to the 2 speeds with all necessary safety devices, motor brake, and emergency stop switch; the machine is approved by the German Wood Trade Association (Holz-BG) and has the GS safety mark. the machine weighs approximately 1000 kg with motor protection switch against overload Kdedpfszt Ai Eex Ai Rsr professional-grade machine, not a hardware store reject optimal, simple, fast, and safe operation

Condition: good (used), Boring head, spindle head, drill head, plunge drill head, plunge head, spindle drill head, boring head, spindle tool Kdedpfx Ajzta I Soi Rsr -Spindle tools: 3 boring heads -Size: Ø 50/57/70 mm -Dimensions/Type: see photos -Submission/Price: complete -Transport dimensions: 180/60/H155 mm -Weight: 3.3 kg