Used Tracked Screener for sale (1,971)

Condition: used, functionality: unexamined, mileage: 5,100 km, operation weight: 32,000 kg, Year of construction: 2007, operating hours: 8,000 h, Powerscreen Chieftain 1800 Double-Deck Screen 2007 Double-deck - 3 fractions, the screen for sale will have an additional fourth conveyor Two independent sieves for improved screening of fine fractions Upper deck area 4800x1350 mm Lower deck area 4200x1350 mm Capacity up to 200 tons per hour with a fraction of 0-31-63 mm Maximum material inlet 100 mm Hydraulically opening grate on the hopper Dedpfx Adozii Tijrocn CAT 100 HP engine Weight 34 tons

Condition: new, Equipment: CE marking, Double deck screener on tracks for easy movement. With orbital hydromotor for regulating the speed of the conveyor belt. Radio control. Maximum speed 3.31km/h. Possibility of delivery with the feeder plate with stop rubber on the screen box. Meshes can be mounted in any size from 2mm to 100mm. Dedpfxsz Hydks Adrscn

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, workpiece height (max.): 60 mm, roll diameter: 830 mm, On-site inspections while the machines are running are possible in Lithuania! Fully automatic edge banding line with the following machines: HOMAG PROFI KAL330/9/A3/WZ (year of manufacture 2013) HOMAG PROFI KAL370/8/A3/WZ (year of manufacture 2016) Dsdpfx Adoz A Tx Torjcn HOMAG PROFI TBL100/20/30/F infeed table (year of manufacture 2013) HOMAG POWER TWL410/25/LQ transfer system cross conveyor (year of manufacture 2016) TECHNICAL DETAILS HOMAG PROFI KAL330/9/A3/WZ & PROFI KAL370/8/A3/WZ edge banding machines Workpiece width without edge at a workpiece thickness of 12–22 mm: min. 60 mm (depending on the workpiece length) Workpiece width without edge at a workpiece thickness of 23–60 mm: min. 100 mm (depending on the workpiece length) Workpiece overhang: 30 mm Workpiece thickness: 12–60 mm Edge height: max. workpiece thickness + 4 mm Edge material on a roll: 0.3–3 mm Edge material height PVC: max. 135 mm Edge material height veneer: max. 100 mm Roll diameter: max. 830 mm HOMAG PROFI TBL100/20/30/F infeed table Roller diameter: 54 mm Roller spacing: approx. 60 mm Panel length: 240–2,500 mm Panel width: 120–3,000 mm HOMAG POWER TWL410/25/LQ transfer system cross conveyor Roller diameter: 64 mm Roller spacing: 110 mm Panel length: 240–2,500 mm Panel width: min. 240 mm Panel thickness: 8–60 mm Panel weight: max. 80 kg EQUIPMENT Clearance-type joining-cutting unit on both edge banding machines A3 basic gluing unit on both edge banding machines Clearance-type processing units on both edge banding machines FA11 finishing unit on the HOMAG PROFI KAL330 FA21 finishing unit on the HOMAG PROFI KAL370 Fixed stop on the left side of the infeed table Transport rollers on the infeed table Side conveyor belt on the infeed table Electropneumatically controlled cross guard on the infeed table Manually adjustable infeed guard Set of small parts Integrated air cushion table Fixed stop on the left side in the infeed and outfeed of the transfer system cross conveyor Infeed roller track with conveyor belt and cross transport Controlled cross conveyor in the infeed Outfeed roller track Controlled cross conveyor in the outfeed Electropneumatically controlled stop guard Side transport belt Manually adjustable panel overhang

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 50,000 kg, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE Fabo tracked impact crusher FTI-110s is a complete mobile system which moves on hydraulicly driven tracked system with 1 km/h speed and combination of a vibrated grizzly feeder, an Impact crusher, foldable stockpile conveyors, control unit and electric generator. In today's conditions and technological processes, businesses are beginning to think about how to make their field of activity more efficient. As they make it more efficient, they always take into consideration factors such as the operationality of the machines they use, their low cost and staffing needs. Our Tracked Crushers can crush with high performance even on the most demanding mine sites with its specially designed body and compact structure. Customization can be done to our tracked systems by Jaw Crusher, Primary and Secondary Impact or Cone Crusher. Advantages of Tracked Crushers; -Heavy-duty walking trackes can reach places where ordinary machines can not reach. -It has the appropriate dimensions and sound level to crush construction waste in the city. -The fuel consumption of the generator and walking track units are very economical. -System maintenance and management is very easy with latest technology control software. TECHNICAL SPECIFICATIONS: Model: FTI-110s Production Capacity: 130-240 tons per hour Maximum Feeding: 500 mm Crusher Type: Impact Crusher SIZE: 1100x1000 mm CSS Setting: 0-50 mm Total Power: 360 kva Vibrating Screen: 1500x2700 mm Weight: 50 tons Dimensions: 2900x3180x14760mm - Low investment and operation cost – Zero substructure preparation – Easiness at usage and maintenance – Easy assembly and disassembly Djdpsz A Dldefx Adrecn FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Year of construction: 2019, condition: used, functionality: fully functional, machine/vehicle number: A-6.3240, Complete 2019 Wienstroth Fixture Heat Treat/Quenching Line. Furnace Temperature Max 880 Deg C, 480kW, Heating Zones: 4, Power Supply Voltage: 460/60 Volts/Hz. Refer to attachments for further equipment specs & drawings. Line to include: Dcedpsz Hb S Aefx Adron High Temperature Furnace w/ Material Conveyers Overhead Crane & Hoist System Quenching Bath w/ Heat Exchanger, Pumps and PLC Washing/Rinsing Station, 2 Zone, TPS & Entrance Conveyer Assembly Transfer Conveyer System, Material Handling Assembly w/ Tracks Low Temperature Temper Furnace w/ Cooling Conveyer & PLC Quenching Line PLC Controller Power Distribution Cabinets, Rittal/Wienstroth 24x Pallets Quenching Line Tooling

Condition: ready for operation (used), Year of construction: 2000, empty load weight: 800 kg, For sale: battery-powered tracked undercarriage. The machine runs and steers. For more information, please call or send a message. Dsdpfez Iubyjx Adrscn

Condition: used, functionality: fully functional, Year of construction: 1999, operating hours: 142 h, Tracked asphalt paver Bitelli CAT BB 651 C Year 1999 GVW: 14,500 kg Engine type: Deutz F5L 912 Dedpfxoz Hzzdo Adrjcn Working hours: 142 Good general condition WE CONSIDER TRADE-INS OF VEHICLES OF ALL BRANDS, MAN, MERCEDES, DAF, RENAULT, VOLVO, SCANIA, WITH CIFA, SERMAC, PUTZMEISTER EQUIPMENT; OR EARTHMOVING MACHINERY CATERPILLAR, FIAT HITACHI, KOMATSU

Condition: good (used), Year of construction: 2007, For sale: well-maintained Holland Lift aerial work platform. Djdoz Eg Akspfx Adrjcn Working height: 14m. Rubber pads. Trade-in and transport options available – please inquire. For more information, call or send a message.

Condition: used, Year of construction: 2004, LIVE HEAD for the Terex Finlay 683 screener. Also fits other screeners. Hydraulically driven, spring-mounted unit. Fully functional. Hole spacing: 110–130 mm. Dcodpfxoz H Rw Ij Adrsn

Condition: used, Year of construction: 2002, operating hours: 4,176 h, empty load weight: 2,300 kg, Weight: 2300 kg Year: 2002 Hours: 4176 Dcjdpjzzgx Hefx Adrjn Condition: Used machine in good condition Price: € 11950,- excl. VAT

Condition: good (used), Year of construction: 2007, empty load weight: 3,600 kg, For sale: well-maintained aerial work platforms. Working height: 8m. Kubota engine. Price is per unit. Trade-ins and transport can be arranged. For more information, please call or send a message. Djdpfsz Duktjx Adrjcn

Condition: good (used), Year of construction: 2007, Teupen Leo 30T Crawler Boom Lift / Crawler Telescopic Boom Lift, 30-meter working height, 2007 A video can be sent via WhatsApp. We have a continuous stock; see our website. Prices are quoted ex Nuland. Dsdpfx Ajzbt Dwsdrecn Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices, in AS-IS condition, without any guarantees (see our general terms and conditions). You can make a non-binding appointment for a viewing and/or test drive. Please call beforehand, as we are not always on site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: used, Year of construction: 2010, functionality: fully functional, type of input current: three-phase, cutting length (max.): 12,000 mm, cutting width (max.): 640 mm, saw drive: 15,000 W, input voltage: 400 V, wheel diameter: 600 mm, – Year of manufacture: 2010 TECHNICAL SPECIFICATIONS: – Motor: 15 kW Cutting dimensions: – max. log diameter: 95 cm – clearance between rollers: 73 cm – max. cutting width (square timber): 64 cm – max. cutting height above saw blade: 39 cm – max. cutting length: 12 m Saw head equipment: – automatic cutting thickness adjustment device – electric head height adjustment: up/down – electric forward/reverse head feed: infinitely variable feed speed – electric saw blade guide arm – hydraulic sawblade tension system with air cushion – debarking unit Sawblade: – length: 4670 mm – width: 38 mm - 50 mm – sawblade guide wheels diameter: 600 mm – belt type: Z – material: cast iron The sawmill is equipped with full hydraulics: – hydraulic leveling system Dedpfxey Na Hvs Adrocn – side stops – material clamp – comb-type log turner – 3 loading arms Machine dimensions: – length: 1520 cm – width: 235 cm – height: 240 cm

Condition: excellent (used), functionality: fully functional, fuel type: diesel, color: yellow, overall weight: 7,720 kg, number of seats: 1, mast type: mono, Year of construction: 2006, operating hours: 11,381 h, Equipment: additional headlights, hammer hydraulics, hydraulics, low noise, rubber tracks, Yanmar mini excavator with rubber tracks Good overall condition Dozer blade Machine ready for work More information on the Almerisan website. Dcjdpfx Adjzav Trerjn

Condition: used, Material: 1095 High Carbon Steel Tensile Strength: 120,000 PSI Shear Strength: 96,000 PSI Thickness Range: .0045" - .025" Line Direction: Left to Right Cut Width & Thickness .0045" = 1/4" , 3/8" , 1/2" , 3/4" , 1" .0051" = 3/8" , 1/2" , 5/8" , 7/8" .0062" = 3/8" Line Speed: 1500 FPM Entry Strip Width: 18' Traverse Wider Coil Width: 8" Entry Coil ID: 15" - 22" Traverse Winder Coil ID: 11" Exit Coil ID: 16" Entry Coil OD: 54" Ribbon Wound Coil OD: 39" Exit Coil OD: 54" Entry & Exit Coil Weight: 10,000# Traverse Winder Coil Weight: 2250#` Complete Line With: Mandrel Uncoiler Hold Down Roll 3 Leaf Hydraulic Expansion 15 HP Drive Disc Drake Edge Control Unit Peeler Table / Deflector Roll Newcor Strip Welder with Planishing 2 Roll Material: 1095 High Carbon Steel Tensile Strength: 120,000 PSI Shear Strength: 96,000 PSI Thickness Range: .0045" - .025" Line Direction: Left to Right Cut Width & Thickness .0045" = 1/4" , 3/8" , 1/2" , 3/4" , 1" .0051" = 3/8" , 1/2" , 5/8" , 7/8" .0062" = 3/8" Line Speed: 1500 FPM Entry Strip Width: 18' Traverse Wider Coil Width: 8" Entry Coil ID: 15" - 22" Traverse Winder Coil ID: 11" Exit Coil ID: 16" Entry Coil OD: 54" Ribbon Wound Coil OD: 39" Exit Coil OD: 54" Entry & Exit Coil Weight: 10,000# Traverse Winder Coil Weight: 2250#` Complete Line With: Mandrel Uncoiler Hold Down Roll 3 Leaf Hydraulic Expansion Sliding Base 15 HP Motor 15 HP Motor Disc Brake Edge Control Peeler Table / Deflector Roll Newcor Strip Welder with Planishing 2 Roll Bridal Unit for Tension Control Double Roll Tracking Roll for Strip Alignment 2 Sets of Rubber Coated Deflector Rolls Edge Guides Andritz Slitter Head New in 2016 5" Diameter Arbors 12 Sets of Quick Change Tooling Arbors Pre-Packed Arbors Shimless Tooling Anti Friction Bearings 25 HP DC Drive, 1750/2000 RPM Scrap Baller Recoiler 16" Diameter Drum 10,000# Coil Capacity 30 HP DC Drive Hydraulic Push-Off Hold Down Roll 21" Drum Face 1 Arm Exit Turnstile Vertical Strand Separator Aligns Strips after Exiting the Slitter Deflector Rolls 12 Oscillating Recoilers 11" Diameter Drums Hydraulic Push-Off Vertical Edge Conditioners S Bridal Strip Tension Rolls (2) Hydraulic Traversing Oscillating Wheel 7.5 HP Drive 1 Arm Exit Turnstiles Powerflex Digital Drives 755 Allen Bradley PLC Digital Drives Digital Readouts Central Hydraulic Units Operator Push Button Stations Slitter Tooling Hydraulics & Electrics Dcsdpfoztc Tdex Adron

Year of construction: 2026, condition: new, functionality: fully functional, The combination of FTJ-1175 jaw track crusher and FTB-1550 scalper screen are stone crushing and screening systems, which are often used in quarries, mines and construction sites. This type of equipment is designed for crushing and screening of hard rocks. Here are the general features of these two FABO equipments combined and serve as a single line FTJ-1175 Tracked Jaw Crusher: - Capacity: Ideal for crushing hard rocks and stones with high capacity. - Mobility: Thanks to its crawler structure, it moves easily in difficult terrains. - Jaw Opening: Thanks to its wide jaw opening, it easily crushes large-sized materials. - Efficiency: It offers long-lasting use with its energy-saving engine and durable construction materials. FTB-1550 Tracked Scalper Screen - Screening Capacity: Suitable for pre-screening of large volume and coarse materials. - Dimensions: Features a 1550 mm wide screen system, allowing for larger material capacity. - Durability: With its wear-resistant construction, it can be used in heavy-duty operations. Dodpfezx U Rlex Adrscn - VariousScreening Options: Different sizes of screens allow separation of various material sizes. Advantages of the Combination: 1. High Performance: Crushing and screening of the material is done quickly in the same system. 2. Mobility: The crawler structure provides portability and offers the possibility of use at different sites 3. Operational Ease: Integrated operation on a single line saves labour and time. 4. Various Applications: Suitable for quarries, recycling plants and large-scale construction projects. With impressive crushing capacity, reduced operating costs, and simple maintenance, this combination is a reliable, high-performing solution for any project FABO’s innovative technology guarantees exceptional efficiency and performance, giving your projects a strong competitive edge.

Condition: used, Year of construction: 2008, operating hours: 15,334 h, 2008 | Komatsu PC210LC-8 | Used Tracked Excavator | 15334 hours Dcsdpfx Aoz Db Dtedrsn 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 22800 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 61 inspection points 52 approved ✅ 2 imperfect ℹ️ 7 issues ⚠️ 📌 Inspector's Comment: Machine with 15000 hours of operation that needs good general maintenance. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "41146 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: excellent (used), Catalog number: 7545 TECHNICAL DATA track width: 250mm roller width: 220mm max. disc diameter: 300mm disc bore diameter: 60mm cutting height: 100mm table width: 650mm table length: 1460mm – top: 2 rows of pawls smooth sliding roller roller with saws smooth, sliding roller – bottom: guide Dcjdpfxoztad To Adron pawls track 2 feed speed settings + stepless central lubrication feed motor: 1.2kW main motor: 21kW dust extraction port diameter: 180mm overall dimensions (L/W/H): 1700x1450x1500mm weight: approximately 1800kg – made in Italy – DTR documentation – robust machine – multi-blade saw, used, very good condition Net price: 25900 PLN Net price: 6023 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to exchange rate fluctuations)

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 606 h, 2016 | Bobcat T590 | Used Compact Track Loader | 606 hours Location: Illinois, United States Shipping available to your destination. Shipping rates can be calculated instantly. About this machine: Compact track loader with an open station, joystick controls, standard-flow hydraulics, and a 66 hp 4-cylinder Kubota diesel engine. Equipped with rubber tracks with roller suspension, Paladin pallet forks, and a 74" combination bucket. ✔ Open station ✔ Joystick controls ✔ Standard-flow hydraulics ✔ 66 hp 4-cylinder diesel engine ✔ Rubber tracks with roller suspension ✔ Paladin pallet forks ✔ 74" combination bucket Dedpfx Adsz Atw Ssrjcn ✔ Hydrostatic powertrain ✔ ROPS Key specs: Engine power: 66 hp (net: 61 hp) Operating weight: 3,513 kg Rated operating capacity: 971 kg Tipping load: 2,773 kg Max. speed: 16 km/h (10 mph) Fuel tank: 138 L Hydraulic flow: 17 L/min Engine: Kubota V2607-DI-TE3B Emission standard: Stage V / Interim Tier 4 What buyers get with us: ✔ No buyer fees ✔ Verified sellers ✔ Make offer ✔ Instant shipping rates without registration ✔ Pre-sale inspection ✔ Documentation support ✔ Secure transaction on every purchase

Condition: used, Year of construction: 2008, empty load weight: 2,300 kg, fuel type: diesel, Used articulated boom lift for sale: Working height: 8,8 metres Weight:  2300kg Lifting capacity: 150 kg Dimensions: 4,08 x 1,65 x 1,96 metres Kubota 3 cylinder Dcjdpfx Aoyw Uczsdrjn Diesel Price per unit: € 13.500,- ex. VAT 6 units in stock!!

Year of construction: 2013, operating hours: 700 h, condition: excellent (used), functionality: fully functional, Used Westeria Airtrack 1 Tracked Windsifter Dodpjyyxx Esfx Adrocn Year 2013 700 Hrs 2000mm wide feed belt / rotating drum Heavies Belt / Lights Belt Volvo Diesel / Electric Generator Driven 19,000 kgs Very Nice Unit Fully Serviced & Ready To Go Straight To Work

Condition: excellent (used), color: black, Year of construction: 2021, operating hours: 42 h, Empty weight: 340 kg Dsdey I T Ttjpfx Adrscn Lifting capacity: 1.200 kg Dimensions of cargo space: 120 x 75 x 50 cm CE mark: yes Technical condition: very good Visual appearance: very good Delivery terms: EXW Production country: UK Please contact Vink Machinery for more information Tracked Carrier * 2021 * 42 working hours * Battery drive * With detachable glass rack * 360-degree turntable * Remote Control * One-hand operated * 1200 kg lifting capacity * 340 kg own weight

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, System consisting of: Dsdpfxszu Shys Adrscn 1 Welding robot Qirox QRC 350-E including control unit, programming handheld device, 24 V buffer, PC connection on the control cabinet side, 2 GB flash drive from a training system, in like-new condition, manufactured in 2023. Gas nozzle sensor, arc welding seam tracking, multi-layer welding technique, point editor, oscillating patterns, transformation. Qineo Puls 600 with Premium control module, wire feeder, torch hose package, welding torch MRW 510 evo, torch testing gauge, mechanical cleaning, pressure booster. Like-new floor track with a capacity of 20 kN, travel distance 12 m, robot is mounted on a C-shaped stand in a hanging position, manufactured in 2019, 135 operating hours. 2 Rotary positioning device with counter bearing TC 5 kN (no operating hours), load capacity 1000 kg, clamping length 5.0 m. Connection control, 4 light barriers, 2 start pre-selection. Delivery date: upon agreement. The components are in stock and need to be assembled and tested. Warranty: 6 months.

Condition: excellent (used), functionality: fully functional, Year of construction: 2001, machine/vehicle number: EM196 - IS4095, Steel crane, overhead crane, gantry crane, indoor crane Load capacity / lifting capacity: 5t - 5000KG Track gauge: 11,390mm, overall dimensions approx. 11,550mm TYPE EL-C 50 11,390 E Year of manufacture: 2001 Lifting height: 6m Overall height from top of crane to hook: approx. 900mm Head beam length with buffer: approx. 2290mm With floor-mounted control Crane is dismantled and immediately available Very good condition, see pictures Dcodpfszv H Anox Adren Column-mounted slewing cranes and wall-mounted slewing cranes are also available. Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000, etc. Shipping via freight forwarder is possible, please inquire with your postal code. Collection preferred.

Condition: used, functionality: fully functional, Year of construction: 1977, machine/vehicle number: MIKA666, Demag 1-girder suspended crane, bridge crane, crane system, hall crane, portal crane, suspended crane system. Load capacity: 500 kg Width: approx. 3.5 m, track gauge: approx. 3 m The undercarriage can be adjusted to fit the girder dimensions up to approx. 8-14 cm. Includes complete control system, floor-level operation via control box. 2 lifting speeds, Demag PK2 chain hoist, 2-strand, 500 kg load capacity. The crane is fully electrically movable in all 3 axes. Lifting height/hook travel: approx. 3 m Connection to 400V 16A Good used condition Dedozv Iybepfx Adrscn Shipping via freight forwarder, collection preferred Location: 75053 Gondelsheim Please inquire about shipping costs based on your postal code; we will provide you with an immediate and non-binding offer!