Used Tree Nursery for sale (120)

Condition: used, functionality: limited functionality, Year of construction: 2000, Tree crown tying device: + Dröppelmann + Type: KA 2000 + Year of manufacture: 2000 + Wheel loader attachment + Hydraulically driven + Radio-controlled - WITHOUT remote control + From municipal ownership Njdpfxjzvqznj Aizswk Receive all newly listed vehicles by email – sign up for our NEWSLETTER! Errors and typos possible, subject to prior sale!

Condition: good (used), 1 x Cherry tree 50 kg washer extractor. Nwedpjzfkyijfx Aizok

Condition: used, Year of construction: 1992, operating hours: 10,150 h, This Eder mobile crane, model M 825 B, used in the sawmill, was manufactured in 1992 and has approximately 10,150 operating hours. Nodpfx Aoyzpg Ajizjwk The crane is equipped with a Hultdins SuperSaw tree grapple, including a saw, which can be used to move and shorten logs. Saw blade: 75 cm. Clamp: 58 cm. Rotor: 16,000 kg. If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: good (used), functionality: fully functional, Total width: 86,400 mm. Trusses: 9x 9,600 mm. Total length: 87,000 mm. Sections: 29x 3,000 mm. Total area: 7,517 m². Leg height: from 3,700 to 4,550 mm. Roof: screen installation, pull-push system. Façades: screen installation, twin-roll system. Located in Germany, Lake Constance region, built according to German standards. Details: Nwsdpfx Aijy Ir Hlozok Legs: box section 120x60 mm. Truss length: 9,480 mm. Upper box section: 60x30 mm. Lower box section: 60x30 mm. Diagonal: round 25 mm. Included: Complete steel structure. Screen drive mechanism. Façade installation. All small materials that can be saved for reuse during dismantling. Excluded: The screens themselves, not reusable. Wiring for the installation, not reusable. Screws, bolts, and nuts that cannot be salvaged.

Condition: used, Year of construction: 1996, operating hours: 12,171 h, total width: 2,300 mm, total height: 2,400 mm, total length: 9,000 mm, Colour: Grey Empty weight: 10.000 kg BOERE sanding line 'Compact' Elite Year of construction 1996 (CE) 12171 Operating hours Maximum height 150 mm Maximum width 1300 mm Elite BKKS 1300 First generator 45kW engine Second generator 30kW engine Third generator 18.5kW engine Voltage 380V, 183Amp Elite TKKS 1100 First generator 45kW engine Second generator 30kW engine Third generator 18.5kW engine Voltage 380V, 172Amp Revised by Boere in 2019 - Year: 1996 - Documentation available: Yes - CE marking present: Yes - Bottom sander: - CE certificate present: No - Serial number: 98015305 - Operating hours: 12171 - Max. working width [mm]: 1300 - Max. working height [mm]: 150 - Sanding belt length [mm]: 1900 - Sanding belt width [mm]: 1310 - Motor power first unit [kW]: 45 - Motor power second unit [kW]: 30 - Motor power third unit [kW]: 18.5 - Feed motor [kW]: 2.2 - Number of contact rollers [pcs.]: 2 - Number of combi units [pcs.]: 1 - Number of steel rollers [pcs.]: 2 - Number of motors [pcs.]: 3 - Belt blow-off system present: Yes - Brush present: Yes - Sanding pad present: Yes - Segments present: Yes - Top sander: - Max. working width [mm]: 1300 - Max. working height [mm]: 150 - Sanding belt length [mm]: 1900 - Sanding belt width [mm]: 1310 - Motor power first unit [kW]: 45 - Motor power second unit [kW]: 30 - Motor power third unit [kW]: 18.5 - Feed motor [kW]: 2.2 - Number of contact rollers [pcs.]: 2 - Number of combi units [pcs.]: 1 - Number of steel rollers [pcs.]: 2 - Number of motors [pcs.]: 3 - Belt blow-off system present: Yes - Structuring brush present: No - Brush present: Yes - Sanding pad present: Yes - Segments present: Yes - Voltage [V]: 380 - Current consumption [A]: 172 - Transport dimensions: 9000mm x 2300mm x 2400mm (l x w x h) - Transport weight [kg]: 10000kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Nwodpfx Aijwnh Eqszsk Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 2015, machine/vehicle number: 03814V2200, functionality: fully functional, operating hours: 2,416 h, input voltage: 380 V, type of input current: three-phase, travel distance X-axis: 2,200 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 280 mm, number of slots in tool magazine: 1, total height: 2,400 mm, total length: 3,000 mm, total width: 1,200 mm, overall weight: 1,100 kg, table length: 2,200 mm, table width: 280 mm, coolant supply: 3 bar, feed length X-axis: 2,200 mm, feed length Y-axis: 1,200 mm, feed length Z-axis: 280 mm, feed rate X-axis: 7 m/min, feed rate Y-axis: 7 m/min, feed rate Z-axis: 6 m/min, spindle motor power: 4,500 W, number of spindles: 1, rapid traverse Z-axis: 6 m/min, rapid traverse X-axis: 7 m/min, rapid traverse Y-axis: 7 m/min, rotational speed (max.): 18,000 rpm, rotational speed (min.): 1,000 rpm, spindle speed (max.): 18,000 rpm, spindle speed (min.): 1,000 rpm, table height: 1,200 mm, Equipment: rotational speed infinitely variable, NUMERICALLY CONTROLLED PANTOGRAPH WITH VERTICAL PLANE MODEL "VERTICAL 2200 OPEN" WITH 3 INTERPOLATED AXES FOR WORKING MARBLE AND GRANITE basic assembly: - range: x-axis=2200 mm. y-axis=1200 mm. z-axis=300 mm; - work surface L. 2500 x H. 1250 mm; - heavy carpentry-made structure in processed and painted steel; - Side openings with loops, both on the left and on the right, for processing oversized blocks with support rolls; - slabs and carter support in inox steel; - highly deep workbench made with extruded aluminium profile ; - slab locking with n°2 clamps with mechanical blocking device; - three-phase electro spindle hp 5 1/2 gas connection with perforated shaft and rotating joint for water passage for internal and external tool refrigeration, and inverter for variation to maximum 18000 r.p.m .; - openable polycarbonate protection for electro-mandrel, with safety micro; Nwjdpeygxc Aefx Aizek - axes movement by means of runners and sliding blocks of balls recircle; - dust tents for total protection of all moving parts; - water cooling tool system with centralized drain, including pump, decanting tanks and locking electrovalve; - electronic panel with console comprising numeric control, pc and monitor. Windows software included ARTCAM INSIGNA: - carrying out of reliefed and engraved writing, using all "true Type" fonts; - cad for carrying out drillings, cuts, engravings, millings and inlays; - import of most common types of files as dxf and dwg to create writings, drawings and stamps, reliefed and engraved logos, showr trays, sinks, arcs and portals; - automatic drilling for inserting bronze letters; - carrying out single and multiple sculptures in high and bas-relief; automatic switch off; 3D PLAN LASER laser copyng system to import manufactured products and tree-dimansional figures (bas and hight - relief) with interface and software for required dimensions

Year of construction: 1999, operating hours: 709 h, condition: used, fuel type: electric, battery voltage: 48 V, machine/vehicle number: IC1461, 198275 Serial Number: 150B0000481299 Battery Details: 48v Nedpfxezt Ez Do Aizswk Brush dont work, no charger

Condition: used, For enquiries about the attachment, Mr. Herden will be happy to assist you (by phone at ...). Magni Rotating Work Basket / Tree Maintenance Basket / 250 kg / Suitable for RTH & TH Series / NEW Price: €6,490.00 net / €7,723.10 gross - Max. load capacity: 250 kg - Width: 670 mm - Length: 1,400 mm - Rotation range: +/- 90° - Max. occupants: 2 - Automatic attachment recognition: yes - Rotating work basket, rotation range +/- 90° - Galvanised, reinforced steel construction Nsdpfx Aeyxafqsizswk - Non-slip floor for safe working at height - Remote control is required for use with the work basket and must be installed on the machine This attachment is suitable for the RTH and TH series. Product code: ATT-01-003 We have many more Magni attachments available in our stock for immediate delivery! Mr. Herden (phone ...) is happy to assist you. We are also happy to provide you with a financing offer upon request. We are an official Magni telehandler sales and service partner. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official JCB construction equipment sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used commercial vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. We supply you with the complete Magni range! Errors and prior sale excepted! = More information = New: Yes Application: Construction Please contact Marius Herden for further information.

Condition: used, Year of construction: 2018, operating hours: 3,469 h, functionality: fully functional, fuel type: gas, drive type: Treibgas, Street sweeper Condition: Ready for use and fully functional Njdpfx Aozvi A Roizowk Technical condition: very good

Condition: used, Year of construction: 2012, operating hours: 2,815 h, functionality: fully functional, machine/vehicle number: 12SLT146060, overall weight: 21,000 kg, Equipment: steel tracks, Tracked diesel 2 shaft shredder in perfect working condition. Dimensions: Weight: 20 Tonne (22UST) Transport Width: 2.5m (8'3") Transport Length: 10.2m (33'6") Transport Height: 3.1m (10'5") Working Width: 2.5m (8'3") Nwedpsya Hmiofx Aizjk Working Length: 10.2m (33'6") Working Height: 4.2m (13'10") Applications All types of wood (railway sleepers, pallets) All plastics (including wind turbine blades) Commercial and industrial waste Construction & Demolition (C&D) Domestic and household waste Green waste (including grass, trees, stumps) Mattresses Paper and cardboard (including paper rolls) White household goods

Condition: used, Year of construction: 2013, operating hours: 915 h, functionality: fully functional, power: 24 kW (32.63 HP), fuel type: diesel, empty load weight: 1,700 kg, total length: 3,126 mm, construction height: 1,969 mm, drive type: Diesel, construction width: 1,090 mm, sweeping width: 1,850 mm, Street sweeper Speed class: 25 Condition: Ready for use and fully functional Technical condition: normal Description: Machine completely inspected in the workshop, cleaned, and passed new UVV and inspection! - Rear-view camera and monitor - Reversing light - Working light on the right - Universal tires - Safety package - Spreader cable - Driving speed 20 km/h - Lubrication points for container and sweeping unit - Seat with mechanical suspension - Universal suction container with circulating water system - High-pressure cleaner - Sweeping unit with 2 brushes - Suction nozzle attachment - Disc brush, plastic - Hand suction hose Nedpfx Aszk Sghoizswk

Condition: good (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: AN-No.: 88.04.017 D, 8 very clean (reworked) Jakob Müller Frick AG looms NF42 from 1988, 1989 and 1990 from my stock. Machines run perfectly, 100% functional (refurbished) 12 shafts, without creel, with Mütrans, partly Müdata 1 piece NF 2/84mm from 1989 for 6.900€ AN-No.: 88.04.017 D with Müdata and Mütrans, 16 stocks 3 pieces NF 2/84mm overhauled from 1990 for 6.500€ each AN-No.: 90.01.704 B AN-No.: 90.01.755 A AN-No.: 90.01.229 A 1 piece NF 2/84mm overhauled from 1989 for 6.500€ AN-No.: 89.00.118 D 3 pieces NF 2/84mm refurbished from 1988 for 6.500€ each AN-No.: 88.04.244 A AN-No.: 88.02.758 A AN-No.: 88.02.758 B The machines come from a curtain band production and were originally equipped with a Z compartment. They were converted to standard compartments as part of the general overhaul. Nwodpfxer Ix Igs Aizsk Dogonl All tension trees and press rollers have been newly vulcanized by Westland. The card rollers in the chain case are also new or newly vulcanized. The central lubrication in the chain case has been optimized by us. All machines have the first shaft free (for heavier reeds) and have 12 shafts installed. All machines are equipped with Mütrans II. Individual machines with double belt take-off (heavy fabrics) can optionally be supplied. I think possible for 4-5 machines. It is also possible to equip it with finely knurled tension trees. I think it is also possible for 4-5 machines. All needle holders are suitable for double needles. For this purpose, two additional Mütrans II can be installed upon request. The machines have been rebuilt from scratch. All bearings, shafts and bushings have been checked and replaced if necessary. All swing arms have been checked and replaced if necessary. Installed are: 1st shaft free (spacer block installed) 2nd and 3rd shaft swingarm 201 4th - 6th shaft swing arm 202 7th - 9th shaft swing arm 203 10th - 12th shaft swing arm 204 13th shaft swing arm 205 All shaft springs have been checked and replaced if necessary. Nothing is porous, cracked or defective. The electrical installation has been checked, the circuit board for the thread monitoring has been checked and, if necessary, repaired or replaced. The machines are painted in RAL 6021 Müller pale green. All panels are clean and free of damage. The machines come without Müdata. 4 machines are also equipped with a crawler gear. The machines have been set up and tested. The machines come without oil, strands, slats, reeds, needles and chain links. Delivery on a Euro pallet, FOB Wuppertal

Condition: used, Year of construction: 1996, Mortise spindle Nwsdpfx Aiezlcx Rezok Tree 50mm Tool for profiling up to 350mm Sold as is, without cleaning or inspection.

Condition: used, functionality: fully functional, Used lifting device for raising and lowering manhole covers, fully functional. Nwedpfx Aiezg Ub Hszok

Condition: used, For enquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone at ...). Westtech Woodcracker C300 Felling Grapple / incl. ALBACH quick coupler / BRAND NEW / in stock & immediately available - Softwood cutting diameter (mm): 350 - Hardwood cutting diameter (mm): 300 - Grapple opening (mm): 1,430 - Shear opening (mm): 550 - Own weight (basic version – full equipment) (kg): 750 – 1,080 - Recommended main circuit flow rate (l/min): 70 – 150 - Recommended auxiliary flow rate (l/min): 45 – 60 - Recommended operating pressure (bar): 280 - Carrier vehicle operating weight (t): 12 – 18 Specification: - incl. Autospeed function - incl. ALBACH quick coupler We have many adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and readily available. In our warehouse we offer a wide selection of Westtech products that are immediately available! Mr. Herden (Tel. ...) will gladly assist you. On request, we are happy to provide you with a financing offer. We are an official sales and service partner for: - Westtech - OilQuick - Holp - Magni telehandlers - DMS - Gierking GMT - Weber MT - Seppi M. - JCB construction machinery - Mercedes-Benz - Iveco Furthermore, with 800 used commercial vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. We supply the entire Westtech Woodcracker product range for you! Subject to change and prior sale. = More Information = New: Yes Net weight: 850 kg Suitable for: Forestry applications Nwodpfx Aijyxkq Dszjk Contact Marius Herden for further information.

Year of construction: 2016, condition: excellent (used), functionality: fully functional, Make: Reifenhauser Model: Mirex-MT-V 1-RZE 120-1800 Year: 2016 Nodsvbcbuepfx Aizowk Condition: Excellent Use: PET / PP / PS Foil or Sheet PET: Thickness Range: 0.25 - 2.2mm Output: 2,000 kg/h Max Sheet Width: 1600mm Extruder: RZE 120mm Electrical Supply: 3 x 480V 60Hz with N Calendar Roll Width: 1800mm Calendar Roll Diameters: 450 / 700 / 700mm Silicon Bath Max Sheet Width: 1600mm Silicon Bath Sheet Thickness Range: 0.15 - 1.5mm 4 Position Winder WOB 1800 for double web winding included. All details are subject to change and/or errors. All equipment is subject to availability and/or prior sale.

Condition: used, Year of construction: 2019, operating hours: 8,889 h, Equipment: all wheel drive, Tigercat LH822D, a modern tracked harvester (forestry machine). This machine is used in forestry operations to simultaneously fell, delimb, and crosscut trees—a so-called cut-to-length system. Tracked harvester manufacturer: Tigercat Industries Functions: Timber harvesting, delimbing, crosscutting (cut-to-length) Application areas: Forestry, including selective logging and salvage operations Dimensions & Weight * Length (without boom): approx. 5,180 mm * Width: 3,430 mm * Height: approx. 3,710 mm * Ground clearance: around 685–710 mm Nwodpfx Aijyawv Iszok * Weight (without attachment): approx. 33,800 kg (ca. 74.6 t) * Tail swing radius: approx. 2,095 mm Drive & Performance * Engine: Tigercat FPT N67 (Stage V, Tier 4f, or non-certified) * Power: approx. 212 kW (284 hp) up to 217 kW (291 hp) at 2,200 rpm Drivetrain / Speed * Maximum speed (low range): approx. 1.6 km/h * Maximum speed (high range): approx. 3.4 km/h Hydraulics & Controls * Main, harvester head, and cooling pumps: piston pumps; additionally, a transmission oil pump * Hydraulic oil reservoir: approx. 204 L Very good condition

Condition: used, Year of construction: 1992, Long spindle with table Tree 50mm Trainer 3 rollers Nwedpezqg Rzjfx Aizok Clamping piece of the drive actuator to be repaired Sold as is

Condition: good (used), Year of construction: 2017, functionality: fully functional, overall weight: 8,500 kg, fuel: diesel, feed length X-axis: 6,000 mm, cutting length (max.): 1,100 mm, Equipment: front-end loader, trailer coupling, Pinosa CPE 1200 Semi Automatic Firewood Processing Machine Machine Type: Firewood Processing Machine Year: 2017 Condition: Very Good, has had very little use. Powered By: 3 Phase, Diesel Generator or PTO. Includes Nwodpfsvbdyxox Aizek FG Wilson P110 110kVA Diesel Generator Feeding Deck Extraction Conveyor with Sieve and Cyclone for Sawdust Machine Description This is a mobile, self-contained wood cutting and splitting machine. It allows you to saw and split sizes of wood from 50 to 480mm diameter, while being movable. The machine can thus be transported on a truck, then installed on demand autonomously using 4 jacks. It is therefore suitable for both the service provision market and for on-site production. Finally, note that it only requires a single operator to produce up to 16T of firewood per hour . Technical Specifications Blade Diameter: 1200mm Max Length of Tree Trunk: 6000mm Min Length of Tree Truck: 800mm Max Diameter of Tree Trunk: 480mm Min Diameter of Tree Trunk: 50mm Max Cut Off Length: 1100mm Min Cut Off Length: 200mm Splitting Possibilities: 2-4-6-8-10-12-14-16 Splitting Cylinder Power: 35T Max Hourly Throughput: 16T/H Power Connection Options: Electric Motor/Electric Generator/PTO Motor Power: 37kW Machine Weight: 8500kg Notes: *Specifications are given in good faith but not guaranteed*

Condition: excellent (used), functionality: fully functional, power: 17.65 kW (24.00 HP), fuel type: diesel, gearing type: hydrostat, Year of construction: 2015, operating hours: 530 h, Dvorak SPIDER ILD-02 Radio-controlled Large-area mower / Slope mower Technical information according to the manufacturer: Spider large-area and slope mower Areas of application: The remotely controlled SPIDER ILD is designed for maintaining uneven and difficult-to-access areas with slopes of up to 40° (with an optional cable winch, up to 55°). The mower is not only ideal for rough terrain, overgrown areas, and unkempt lawns but also for well-maintained parks. It is invaluable, especially for maintaining ditches around roads, cutting grass in orchards and nurseries, landfills, areas around power plants, airports, or mountain hotels, ski slopes, parks, and military areas. In addition, it can be used in agriculture and is often used for mowing golf courses and other sports facilities. Thanks to its unique drive system, it is very well suited for maintaining the surrounding terrain of reservoirs, rivers, and dams. The machine's exceptional environmental friendliness results from its low weight and soil-friendly drive system. The 4-wheel drive enables the mower to be used in wetlands and protected nature reserves. Mowing system: Mulching system Control: Radio remote control Cutting width: 123 cm Cutting height: Adjustable from 90 - 140 mm Cutting system: 4 blade bars with 8 blades Area output: Ø 3,500 m²/h | max. 7,000 m²/h Engine: Kawasaki FS 691V | 2 cylinders Engine power: 17.6 kW | 24 hp | 726 cc Transmission: Hydrostatic transmission 0 - 8 km/h Hour meter: Yes Mowing clutch: Electromagnetic with brake Drive: 4-wheel drive Steering: 4-wheel steering Wheels: Continuously rotatable by 360° Tires: 16 x 6.50 | V-profile Tank capacity / consumption: 16 liters / 3 - 3.8 l/h Weight: 335 kg Dimensions: 1640 x 1430 x 920 mm This SPIDER ILD02 with a cable winch was first commissioned in 2015, has 530 operating hours according to the meter, and is in a well-maintained overall condition with the usual signs of wear and tear for this class of equipment. The service has been recently performed, and it is ready for immediate use! - Net price: €15,882 / Gross price: €18,900 - Inspection / test drive is possible - Shipping costs nationwide (except islands): €400 - We would be happy to have our leasing partner prepare an attractive leasing/financing offer for you! Nwedpjztp Smefx Aizok

Condition: new, Year of construction: 2021, functionality: fully functional, overall weight: 600 kg, workpiece diameter (max.): 40 mm, Round Log Profiling Machine | Log Milling Machine | Log Shaper For sale is a round log profiling machine designed for processing tree trunks. This machine – also known as a round log milling machine or log shaper – enables the production of round log components for log home construction, landscaping, and creative woodworking projects. Description A round log profiling machine for machining tree trunks, ideal for log home construction and demanding timber structures, is offered for sale. The machine performs precise processing of round logs in several coordinated work steps, resulting in perfectly fitting components for natural log houses, log cabins, or structural timber projects. Njdeyr E Ezopfx Aizswk Processing Steps The machine performs several operations in a single process: - Debarking Removal of bark and preparation of the log. - Shaping Uniform rounding and contouring of the log. - Contour and Longitudinal Milling Milling of profiles and contours along the entire length. - Milling of Installation Grooves Thermal barrier / moon groove for precision log house assembly. - Cutting Notching for sockets or joints at 90-degree angles. - Finishing A complete log is processed in approximately 30–40 minutes. Applications - Log house construction - Natural log buildings - Round log structures - Timber constructions Advantages - Multiple work steps in a single machine - Precise processing along the entire log length - Ideal for small to medium production volumes - Electric drive systems Target Users - Log home builders - Timber framers - Timber construction companies - Round log specialists Accessories - Spare cutterhead - Knife set - Knife sharpening machine - Spare parts kit Inspection Inspection possible by appointment. Further information and technical details available on request. The sales price refers to the complete machine including accessories! Keywords: Round log milling machine, log shaper, round log machine, round log profiling machine, log milling machine, timber log milling machine, round log profiler, round log processing machine, log house machine, round log processing unit, post milling machine.

Condition: used, Year of construction: 2011, cutting width (max.): 4,300 mm, air demand: 4.45 m³/h, cutting diameter: 75 mm, Biesse Sektor 450 K1 - 4.300 x 4.400mm Description SIZING CENTRE SEKTOR 450 - K1 / 4300 x 4400 Motor 7,5 kW Scoring unit motor 2,2 kW 1+3 tables Speed 1-120 m/min. Automatic board measuring on Manual cuts and, with OSI Plus option, on Sequences programs Push button for remote control start cycle, complete with emergency stop button. Basic electronic label printer Label printer support stand OS-Labelling - Graphic labeling on the machine with part drawings. QUICK OPTI software for optimization of cutting patterns. On-board version. OSI PLUS interface. Includes: Order management, navigation through tree, advanced simulation, sequence mode, Macro functions for sequences, grooving, function Editor, advanced statistics elaboration, panel and drops stock, technological parameter control system, management of unstrained cuts on the boards. 3 Rounded air cushion unloading table, size 2050 x 620 mm Transfer device for the second air cushion unloading table. (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Nwsdozqcrzjpfx Aizok Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: used, Year of construction: 2024, operating hours: 25 h, Caterpillar engine (kW/HP): 340 / 460 Discharge height: 2,898 mm (tracked version) Discharge height: 1,830–4,151 mm (at 35°) Shredding unit: • Screen basket: 250 mm (other sizes available, including 80 / 100 / 125 / 150 / 180 / 250 / 300 mm) • Roller speed (min⁻¹): – Hydraulic drive, max. 32 Nwedpfx Aiezqbhnjzek • Roller length: 2,820 mm • Roller diameter: 610 mm Throughput, depending on the material: up to approx. 60 t/h Weight: approx. 25.7 t Transport dimensions – L × W × H (mm): 6,940 × 2,854 × 3,268 (tracked version) Working position L × W × H (mm): (conveyor belt 35°): approx. 11,372 × 3,290 × 4,151 Further features: Slow-speed, 2-shaft shredder for wood and green waste Very well suited for green waste, tree stumps, and all types of wood waste, as well as old wood Optional screen baskets available upon request: 80 mm round, 100, 125, 150, 180, or 250 mm (among others)

Condition: new, Year of construction: 2022, functionality: fully functional, Make Kiefel Natureformer Model KFT 90 Speed Year 2022 Condition New - Machines are unopened and still in original packaging from Kiefel. Nsdpfx Aiswkkpqjzewk Forming Area 900 x 600 mm (35.5 x 23.5 in) Max Height of Formed Part 120 mm (4.75 in) Punching Force 600 kN Shot Weight Max. 300g (10.5 oz) Cycle time 15 seconds +/- Machine picture shown is for example only. Machine has not been installed.

Condition: used, Year of construction: 1995, Long spindle long tables Digitized axes Digitized guide 5 speeds of rotation Engine 7.5hp 380V Face-front table extension Tree diameter 50mm Nwsdpfxoztk D Dj Aizjk New shaft and motor bearings New engine brake 4-roller trainer