Used Trimming & Bearding Machine for sale (66,397)

Condition: good (used), Make: OMERA Type: R4 / 12-2 Year: 1976 Table length : 1900 Table width : 1000 Steady arm throath HOR : 670 Steady arm throath VER: 940 Hsdpekvnumefx Aitsnn Stroke cylinder : 350 Column diameter : 200 Specifications Metric US Standard There are no specifications for this machine (yet). Dimensions (Estimate) Length 3000 mm Width 2200 mm Height 2500 mm Weight 2800 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2008, condition: good (used), Make: OMERA Type: R 1600 Year: 2008 Specifications Metric US Standard Max. blank / workpiece over bed 1800 Dimensions (Estimate) Length 2800 mm Width 2000 mm Height 2600 mm Weight 4100 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Share on Downloads Hnsdpfxskvnuus Aiton Max. blank / workpiece over bed:1800 Length: 2800mm Width: 2000mm Height: 2600mm Weight: 4100kg Table length 2500 mm Table width 1450 mm Spindle diameter 250 mm Spindle Rpm 3 - 20 Gr/1Gr Stroke pinole arm 400 mm Column arm 250 mm Troath arm 900 Height arm 1400 mm Max. blank / workpiece over bed:1800 Length: 110.236inch Width: 78.74inch Height: 102.362inch Weight: 9043lbs Table length 2500 mm Table width 1450 mm Spindle diameter 250 mm Spindle Rpm 3 - 20 Gr/1Gr Stroke pinole arm 400 mm Column arm 250 mm Troath arm 900 Height arm 1400 mm Table length 2500 mm Table width 1450 mm Spindle diameter 250 mm Spindle Rpm 3 - 20 Gr/1Gr Stroke pinole arm 400 mm Column arm 250 mm Troath arm 900 Height arm 1400 mm

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, PROFILATRICE COMAL PRD 12 Automatic edging machine for strip end processing. Used to prepare strip edges for subsequent roll forming. The machine is equipped with a set of rollers capable of performing cold roll forming of strips and sheets, which are continuously shaped until the desired profile or tube is achieved. The machine has seen very little use, is fully operational, and is in good overall condition. Manual and original documentation are available. Hnodpfjxdr Swex Aiten

Condition: new, Deburring machine Make: Assfalg Hodpfx Aisb E Dc Hstonn Model: FS 5 Condition: new machine Speed: 2,800 rpm Max. chamfer width: 3 mm Equipped as standard with: - Guide rail 400 x 50 x 10 mm - Cutter head without indexable inserts - Chip drawer - Operating instructions

Condition: excellent (used), Edge trimming machine Hedpfjwiwnqox Aitenn Working height: 800 mm Dimensions (L x W x H): approx. 1,060 x 720 x 930 mm Compressed air connection: 6 bar Weight: approx. 120 kg Including cutter

Condition: used, Year of construction: 2001, OMERA DIAMETER: 1200 mm Hnsdpfx Asy Rx Eysitjn

Year of construction: 2003, condition: used, OMERA MAXIMUM DIAMETER: 1000 mm Hnsdpfx Aey Rx D Aeitsn

Year of construction: 2025, condition: new, KDT-03 Trimming Machine 380V Grooving machine – 380V powered electric grooving machine, equipped with a foot pedal with an emergency switch, has a retractable lower shaft. Includes 6 sets stones shown in the picture. Easy and convenient machine operation. Technical specifications Range of processed sheet metal: 1.2 mm Roller diameter: 62mm Hsdpfx Aiefwmvhstenn Dimensions length height: 900x450x1350 (mm) Weight: 135kg

Condition: used, Year of construction: 1977, functionality: fully functional, machine/vehicle number: M02L/7647, Offer Number: M02L/7647 Machinetype: trimming machine Make: HILGELAND Type: ME2VSP Constr. year: 1977 diameter range: M8 Hnedpfx Aijwi S Sdeton shaft length under head: 6-80 mm output pieces/min: 200 Location: In our warehouse

Condition: used, Year of construction: 1978, functionality: fully functional, machine/vehicle number: M02L/8406, Offer Number: M02L/8406 Machinetype: trimming machine Make: HILGELAND Type: ME4SP Constr. year: 1978 diameter range: 5-12 mm shaft length under head: 10-130 mm output - pieces/min: 120 Hsdpfx Aiswi S Avetsnn Location: In our warehouse

Condition: used, Year of construction: 1983, functionality: fully functional, machine/vehicle number: M02L/7787, Offer Number: M02L/7787 Machinetype: trimming machine Make: HILGELAND Type: ME2VM Constr. year: 1983 Hodpfx Aiewi S Ryotonn diameter range: 2,2-8 mm shaft length under head: 6-40 mm output pieces/min: 250 Location: In our warehouse

Condition: used, Year of construction: 1965, functionality: fully functional, machine/vehicle number: M02L/6992, Offer Number: M02L/6992 Machinetype: trimming machine Make: HILGELAND Type: ME2SP Constr. year: 1965 diameter range: 2,6-8 mm shaft length under head: 6-50 mm Hodpewi Taijfx Aitenn output pieces/min: 260 Location: In our warehouse

Year of construction: 2021, condition: ready for operation (used), A Mammut trimming machine in mint condition for the further processing of drawn and pressed parts including welding device is available. Operating hours: 444h. Including welding device CEA BSW 50, documentation available. On-site inspection is possible. Hnedpfevnd T Ejx Aiten

Condition: ready for operation (used), functionality: fully functional, Wurster & Dietz Trimming and Re-Cutting Machine Type FR7 with in-machine adjustment Star-delta soft start Hnedpfx Aisv I D Shjton Feed roller table Single-blade spiral roller chip separator Chips discharged into a trolley Main product on the feed roller table

Condition: refurbished (used), Trimming recutting machine MEM Cobra Cutting height 120 mm Diameter 1070 mm 4 axes variable Hodpfxju Ni Iuj Aitonn 2 x 55 KW Refurbished machine. Optionally we can offer new sprinkle separator as in photo.

Condition: used, functionality: unexamined, Ferwood code: AGG0059 - Manufacturer code: 1-056-11-0261 - Condition: Used - Functionality: Not tested - If interested, we offer refurbishment service, please contact us. Weight and transport dimensions: 9 kg, 46x39x27 cm Hnsdpfovu Avrox Aitjn

Condition: used, Year of construction: 2014, machine/vehicle number: 201409V, SECOND-HAND SEMIAUTOMATIC TRIMMING MACHINE FOR STRAIGHT AND SHAPED PANELS MOD. VSR FRAVOL - CE RULES - KW 1,5 - Volt. 230/50 - Matr. 201409V Hnedpfx Aswr Uhyjitjn - Year 2014

Condition: ready for operation (used), * Brand: Triman * Surface: length 3000 mm, width 1800 mm - 4 decks Hedpfsywml Iox Aitonn * Driving: 4 pieces vibration motors of each 3,2 kW * Screen opening: [] 10-6-4-2 mm * Capacity: 0-2 mm 55 t/h * Incl.: steel construction and vibrating chute.

Condition: good (used), Year of construction: 2005, machine/vehicle number: SBLG 0005, Proto Trax VL 3 jaw SMW chuck Hnsdpjzb Ipzofx Aiten 11KW Spindle motor 104mm spindle bore Spindle speeds 30-1800RPM 350mm swing over cross slide X axis travel 280mm Z axis travel 1650mm 1750 mm between centres Coolant pump and tank

Condition: excellent (used), Year of construction: 2021, Traverses X Y Z: 660 x 450 x 500mm, Table size 720mm x 420mm, table load 500kgs, spindle speed 12,000rpm, spindle motor power 28Hp, Siemens 828D Control with Shopmill, rapid feed XYZ axis 24m/min, Hnodpfjzbitusx Aitsn Spindle taper BT40, 12 station ATC

Condition: good (used), Year of construction: 2012, Traverses X Y Z: 785 x 470 x 530mm, Table size 900mm x 500mm, spindle speed 8000rpm, Hjdpoq R Tnzjfx Aitjnn spindle motor power 11kW, Prototrak, rapid feed XYZ axis 20m/min, Spindle taper BT40, 16 station ATC, swarf auger.

Condition: used, Year of construction: 2004, XYZ Proturn VL 355 ProtoTRAK CNC Gap Bed Centre Lathe ProtoTRAK SLX Control (2004) Max’ Distance Between Centres 1000mm Max’ Swing over Cross-slide 225mm Max Swing over Bed 360mm Hnodpfezav N Tsx Aitsn Spindle Bore 52mm Spindle Speeds 50 – 4000 rev/min Spindle Motor 5.75Kw Quick Change Tool Post Tailstock MT4 Tailstock Dia’ 75mm Tailstock Travel 160m Manufactured | 2004 Supplied with: 3 Jaw Chuck Interlocking Chuck & Main Guards 3 Toolholders TRAKing Constant Surface Speed Coolant Worklight Auto Lubrication For Sale with Jet Machinery Ltd Jet Machinery Stock No: #79196 Machine Serial Number: SL091 Cost: £13,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2011, XYZ Proturn SLX 1630 ProtoTRAK CNC Gap Bed Centre Lathe Ex Research machine – Superb Condition ProtoTRAK SLX Control (2011) Max’ Distance Between Centres 760mm Max’ Swing over Cross-slide 218mm Max Swing over Bed 400mm Spindle Bore 52mm Spindle Speeds 150 – 2500 rev/min Spindle Motor 5.75Kw Spindle Camlock D1-6 Quick Change Tool Post Tailstock MT4 Tailstock Dia’ 60mm Tailstock Travel 127mm Manufactured | 2011 Weight 1560Kgs Supplied with: Two-axis CNC, Two-axis DRO. TRAKing, Constant surface speed. Electronic hand-wheels for X & Z Axes. Joystick for feed & rapids. Interlocked chuck guard and main guard. Quick change toolpost with holders. 3 Jaw chuck 5C Collet Chuck Coolant For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #78211 Machine Serial Number: 16P99080-063 Cost: £17,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Hodozav D Dopfx Aitsnn Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: new, mileage: 1 km, power: 50 kW (67.98 HP), gearing type: automatic, fuel type: diesel, overall weight: 2,850 kg, lifting power: 1,000 kg/m, drive condition: 100 %, chain condition: 100 %, Year of construction: 2024, Equipment: additional headlights, cabin, GG010 The new Günter Grossmann GG010 LOADER The Günter Grossmann GG08 loader (1000 kg payload) is brand new. Günter Grossmann is a high quality machine made for a European company. The charger is very strong and can work under all conditions. The charger is very nice. The control panel is very nice and clear. The cabin is soundproof, insulated, equipped with heating, very comfortable and beautifully glazed, allowing safe and comfortable work. The machine has a very durable construction. The machine is equipped with a quick coupler, which makes it possible to change accessories quickly without leaving the cab. Additional equipment: 4 in 1 bucket, crocodile grab, crocodile grab for trees, straw or silage. Price 14,550 euros (excl. VAT) Included as standard GG010 loader + bucket + pallet fork + quick coupler Model 1000 kg SPECIFICATIONS Model: GG10 Brand: Günter Grossmann Engine: Changchai 390 Engine: In-line setup, water-cooled four-stroke diesel engine Engine power: 50 hp Speed: 2200 r/min (rpm) Steering system: Cycloid full hydraulic steering system: BZZ-80 System Pressure: 10MPa Hsdpfoiit Erex Aitonn Service brake: Hydraulic four-wheel brake with staggered shoes Parking brake: manual Tire: 10-16.5 Wheelbase: 2170mm Track: 1285 mm MEASUREMENTS Total length (bucket at ground position): 41--mm Ground to top of cab: 2530 mm Total width: 1600 mm WORKING RANGE Bucket capacity: 0.5 m3 Bucket width: 1600 mm Max. Height Breakout Force: 28KN Rated load: 1000 kg Operating weight: 2850 kg Drive means: four-wheel drive Min turning radius: 4600 mm ACCESSORIES Bucket 4 w 1: 1050 Eur Pitchfork: 1050 Eur Pallet fork: 650 Eur Quick coupler: 600 Eur Drill: 1400 Eur Bale clamp: 950 Eur Grass clip: 950 Eur Lawnmower: 1450 Eur Snowplow: 1375 Eur

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: automatic, laser type: fiber laser, laser power: 3,000 W, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Working Area (mm): 3048×1524 X-Axis Travel (mm）: 1524 Y-Axis Travel(mm）: 3048 Z-Axis Travel（mm）: 80 X/Y Axis Positioning Accuracy: ≤0.03mm/m X/Y Axis Repositioning Accuracy: ≤±0.02mm Maximum Synthetic Positioning Speed: 150m/min Maximum Acceleration: 1.2G Cutting Slit Width: 0.1mm-0.5mm (measured for platesless than3mm thick) Cutting Surface Roughness: Ra3.2um-Ra25.4um(measured for plate thickness below3mm） Floor Size(mm): 6000*3000 Mainframe Dimension(mm): 5000*2300*1800 Screen Size: 21"LCD TransmissionMode: Rack andpinion dual drive Hjdpfexvwcxox Aitjnn Table Loading Capacity: 1.1(ton)