Used Twin Roll Forming Stud & Track Machine for sale (75,384)

Condition: used, Year of construction: 1997, functionality: unexamined, total height: 2,500 mm, total length: 33,223 mm, total width: 2,000 mm, table width: 700 mm, input frequency: 60 Hz, input voltage: 460 V, table length: 5,000 mm, table height: 1,200 mm, control cabinet width: 600 mm, control cabinet length: 1,500 mm, control cabinet height: 2,500 mm, compressed air connection: 5.5 bar, Stud & Track Rollforming Machine With 4.5 Tonnes Decoiler & Crane 5 Tonnes Capacity - Fully Dismantled - Ready to be transported MACHINE MANUFACTURER: BRADBURY UK GENERAL SPECIFICATIONS STUD LINE MATERIAL : GALVANIZED COLD ROLLED STEEL MATERIAL STRENGTH : 85.000 PSI MAX YIELD STRENGTH 55.000 PSI MIN· YIELD STRENGTH THICKNESS: 20 GA. TO 16 GA.-"HEAVY GAUGE" 22 GA. TO 25 GA.-"LIGHT GAUGE" ENTRY COIL WEIGHT: 10.000 LB MAX ENTRY STRIP WIDTH: 12" MAX C APPROX. 5" MIN C APPROX. ENTRY COIL I .D: 20" MAX ENTRY COIL O.D: 72" MAX EFF. LINE SPEED : l20-150 FPM-"HEAVY GAUGE" 175-250 FPM-"LIGHT GAUGE" ROLLFORMER SPEED: 120-250 FPM PASS LINE HEIGHT: 51" LINE DIRECTION : RIGHT TO LEFT MODE OF OPERATION : PREPUNCH/POSTCUT CUT LENGTH : 20' MAX. 5· MIN GAUGE" : 90 % C APPROX. ) OF PRODUCT iON < i 6' LENGTH TOLERANCE : •/- 1/16" AT 250 FPM Hedpfx Akjxya Hzjrenu MAIN POWER : ELEC : 460 VOLTS 60 HERTZ 3 PHASE 192.2 FLA : AIR : 80 PSI MIN. CLEAN 6 DRY : HYO : 1500 PSI WORKING PRESSURE CONTROL : 115 VOLT AC AIR CONSUMPTION: 2 CFM MAX. AT 80 PSI

Condition: new, Year of construction: 2025, Roll forming metal siding “double façade panel” machine SPM-2 Roll forming metal siding “double façade panel” machine SPM-2 is new design product of our company for façade and wall metal panels forming with the necessary configuration. These double façade panels are very popular in construction business of cladding residential buildings and industrial structures, for the construction of fences of various configurations, gazebos, roofing elements, etc. The SPM-2 metal siding production line is fully automatic and consists of a rolling part of the machine, an automation system and guillotine cutting shears at the machine exit. The line can have as additional parts a manual or automatic uncoiler for metal rolls, depending on the customer's needs. As standard version, this metal siding double façade panels roll forming machine SPM-2 makes a flat panel profile, but with the additional equipment, it is possible to roll panels with a microwave or rib shape profile. To start rolling, it is necessary to install a roll of metal to the decoiler and to put the end of the strip to the first rolling rollers of the equipment and feed it into them. After step by step, to put the metal to the next rollers, adjusting it if necessary. When metal comes to the cutting device of machine you need to feed metal into cutting knives and to make “zero” cut. After such step, equipment can move to automatic operation mode. The control panel of machine has the ability to set the number of tasks and the length of products, single tasks or to work in multitasking mode. After setting up necessary parameters the machine will automatically roll the metal cladding wall panels and cut them into necessary sizes. Thus, the customer will receive final product as quickly as possible and with the highest possible result. The roll forming speed is adjustable and can be up to 10-15 meters per minute. The SPM-2 metal wall cladding panels production line has special tools for punching out fastening holes on the side of the panel. It makes possible for the customer to get more interesting solution options and to offer a wider range of products to the end user. Hnjdpsxghngefx Akrsu The rolling part of the machine has 18 pairs of forming steps, ensuring high quality of final product. You can get machine with protective cover or without it as per your request preferences. Specifications Material width (mm) 416 The material thickness (mm) 0,4-0,5 Engine power (kW) 3 + 1,1 Rolling speed (m/min) 10-15

Year of construction: 1990, condition: used, functionality: fully functional, For sale is a robust and fully operational roll forming machine for the production of corrugated and tile-profile sheets made of aluminum. The system is suitable for the continuous production of various profile geometries. The machine was commissioned in October 1990 at Leichtmetallwerk Nachterstedt GmbH and impresses with its solid industrial design. Thanks to the integrated profiling line, the cutting and embossing tool, and the automatic stacking device, an efficient production process is possible, from the coil to the finished profile. The system is particularly designed for the production of roofing profiles, tile profiles, and aluminum corrugated profiles, thus offering a versatile range of applications in the field of sheet metal processing and profile manufacturing. System components: - Coil - Profiling line - Cutting and embossing tool - Automatic stacking device Currently produced profiles: - Tile profile 33/175; material thickness: 0.6 mm - Asymmetrical corrugated profile 33/175; material thicknesses: 0.6 mm and 0.7 mm - Aluminum corrugated profile 28/125; material thicknesses: 0.7 mm, 0.8 mm and 1.0 mm Hedpfx Aksy Sxhwjrenu Condition & Inspection: The system is ready for production, is in fully operational condition, and is currently still used for production. This allows the functionality to be verified on-site if desired. The roll forming machine can be inspected at any time by arrangement at our location in Krostitz, Hilchenbacher Straße 2A. The system is immediately available and ready for sale. We will gladly provide further technical information, images or details upon serious interest.

Condition: refurbished (used), ROLLFORMING MACHINE PRODUCING SQUARE PROFILES WITH 5 TONES OF TOOLS Hnedsfgl Aqopfx Akrou MADE IN ITALY

Condition: used, Width: 60 cm Hnedpfx Aksz R S T Ujrju Complete roll forming line equipped with tools for the production of a new type of industrial gutter for galvanized steel/stainless steel CE compliant Uncoiler capacity: 2 metric tons Maximum width: 600 mm Coil inner and outer diameters: 508–920 mm Hydraulic claw extension: 460 > 640 mm 4 kW Roll Forming Line Type H 18 stations Maximum width: 600 mm Maximum thickness: 0.8 mm Shaft diameter: 60 mm Maximum center-to-center shaft distance: 300 mm Siemens Simatic touchscreen control + Ethernet connection 7.5 kW Hydraulic shear Force: 5 metric tons Condition: machine has seen very little use Online auction of metalworking machines, woodworking machines, overhead cranes, workshop equipment, and lumber inventory, including an AMADA Arcade 210 CNC punch and nibbler, MAZAK VTC-41L and MT-V-515 vertical CNC machining centers, MAZAK Super Turbo-X 48 Mk II CO₂ laser cutting machine, BYSTRONIC Byjet 4022 CNC waterjet cutting machine, TECNOMA profiling and roll forming machines, ELUMATEC and EMMEGI aluminum sawing machines, HACO ERMS 200-metric-ton CNC press brake, ADIRA CNC press brake, LEFORT C 265T hydraulic scrap baler/shear combination, ESAB Pegasus CNC plasma cutting machine, GEMA powder coating machine with drying oven and exhaust system, EURO-MAC punching and nibbling machine, various KONE and DEMAG overhead cranes, VECOPLAN industrial shredder, NEDERMANN filter unit, METORA band saw, various metalworking and woodworking machines, panel saws, edge banders, milling machines, drills, compressors, workbenches, teak beams, sawn logs, and various accessories, etc. The online auction opens Wednesday 14 October and closes Thursday 5 November. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Tuesday 3 November Pickup days are on: - Tuesday 10 November - Thursday 12 November Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Year of construction: 1980, condition: used, Rolling mill in working condition, designed for the production of hot-rolled metal products: reinforcing bars, rounds, squares, angles, flats, channels, and beams. Hnodpfx Asz Eq Nuskrou Maximum initial blank diameter: 180 mm. It consists of a three-roll roughing stand with a diameter of 600 mm and five finishing stands with a diameter of 320 mm, as well as a calibrating three-roll stand with a diameter of 320 mm. High productivity. Cantilever-type rolling rolls are used. They are inexpensive to manufacture and can be quickly replaced when switching from one type of rolled product to another. Location: Ukraine, Sumy. Dismantling and loading are included in the price.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, sheet thickness (max.): 3 mm, total width: 2,000 mm, total length: 14,130 mm, total height: 2,170 mm, input voltage: 380 V, power: 40 kW (54.38 HP), overall weight: 13,680 kg, We offer this used Huachen ROLL FORMING MACHINERY HC50-60X80-100-120 profiling line, manufactured in 2024. Model: HC50-60X80-100-120 Dimensions: 14130 × 2000 × 2170 mm Serial Number: 202408976 Power: 32.5 + 7.5 kW Weight: 13680 kg Manufacturing Date: 2024-08-12 Voltage: 380 V Frequency: 50 Hz Standard: YB/T 4249-2011 USED OMEGA PROFILING MACHINE – As good as new Technical features: • Production of Omega profiles 80 – 100 – 120 (see technical data sheet) • Automatic Omega profile changeover • Maximum workable thickness: 3 mm • In-line hole punching • Hole punching on the profile height • Complete profiling line, ready for use • High profile precision and repeatability Machine condition: • Limited use: only 10 months of operation • Perfectly functional • Regular maintenance • Excellent mechanical and aesthetic condition Advantages: • Reduced setup times thanks to the automatic changeover • Ideal for medium to high production volumes • Excellent value compared to purchasing a new machine Available for inspection and testing. Technical documentation available. Hnodpfxoz D Dxge Akreu Attractive price.

Condition: good (used), Year of construction: 2011, For Sale: Konig Industrie Rex I 6/5 row Range: 33 - 95 grams Year of construction: 2011 Very well maintained Diagrams available + Hopper with oil system + Spreading belts Please note: the power unit is missing. (New price of the power unit approx. €10,000) However, it is possible to connect this Rex directly to a proofer that does have a power unit. Transport can be arranged. Inspection possible on-site. Price: €35,000,- EXW Hodow Edmfspfx Akrjnu If you have any questions or comments, please do not hesitate to contact us. Sincerely, Leo Holland

Condition: excellent (used), Year of construction: 2025, functionality: fully functional, DESCRIPTION: Complete production line: hydraulic uncoiler, guided feeding system, roll forming machine, hydraulic post-cutting, and automatic run-out/stacking. Profile-specific tooling for TR135-310-930 high-profile sheet metal. Hnodpezvaibsfx Akrju Siemens PLC/HMI control system and Schneider frequency-controlled main drives. Minimum thickness: 0.75 mm, Maximum thickness: 1.5 mm Effective width: 930 ± 5 mm Feeding width: 1500 mm Material: Galvanized coil, Yield strength: 350 MPa Working speed: approximately 20 m/min Stacker length: 12 m Location of the line: Serbia

Condition: new, Year of construction: 2026, Automatic Roll Forming Line for Light Gauge Steel Frame Production This automatic roll forming line is designed for manufacturing Light Gauge Steel (LGS) and Cold Formed Steel (CFS) structural profiles used for steel frame houses, modular buildings, commercial buildings and prefabricated construction systems. The production line automatically performs feeding, leveling, punching, roll forming, profile marking and hydraulic cutting according to digital production data. It is an ideal solution for manufacturers of: Light Gauge Steel structures Steel frame houses Prefabricated buildings Modular buildings Tiny houses Commercial steel structures Residential steel framing Cold formed steel construction systems Flexible Machine Configuration The roll forming line can be supplied in two different configurations depending on production requirements. Fixed Profile Machine Designed for manufacturers producing one profile size with maximum productivity and simplified machine setup. Multi-Profile Roll Forming Machine An adjustable roll forming system capable of producing several profile widths on one machine by changing the roll forming configuration. This solution provides greater production flexibility while reducing investment costs compared with purchasing multiple dedicated production lines. Complete Automatic Production Process The machine automatically performs the following operations: Coil feeding Strip leveling Servo punching Hole punching Slot punching Service hole punching Roll forming Profile identification marking Hydraulic cutting to length Finished profile discharge The production line is designed to work with professional steel frame design software. The operator imports production data generated from a building design into the machine control system. Based on this information the machine automatically manufactures every structural member including: wall studs tracks floor joists roof trusses rafters beams structural reinforcements Each component is produced with the correct length, punching pattern and identification marking required for final assembly. Automatic Profile Marking Each profile can be automatically marked during production. Typical marking information includes: Profile number Wall identification Member position Assembly reference Project identification Automatic marking significantly simplifies profile sorting and speeds up on-site assembly. Instead of manually identifying every component, installers receive a complete production kit with every profile clearly identified. Automatic Punching System All punching operations are synchronized with the roll forming process to achieve high accuracy and repeatability. Main Advantages Fully automatic production Computer controlled manufacturing Automatic profile marking Servo punching system Hydraulic cutting High dimensional accuracy Reduced material waste Fast production Flexible profile sizes Suitable for custom house projects Reduced manual labour Easy assembly thanks to profile identification Applications Technical Specifications Typical options include: Single-profile roll forming machine Multi-profile adjustable machine Automatic profile marking Servo punching Hedezrt Ivopfx Akrsnu Hydraulic cutting Automatic decoiler Hydraulic decoiler Computer control system Production management software compatibility

Condition: used, DALLAN Rollforming machine | Omega profiles 60mm & 80 mm With 11 forming stations, fully equipped and currently set up for Omega 60 mm, the line includes additional tooling for Omega 80 mm profiles. This machine is complete, in excellent condition. DALLAN rollforming line with 11 forming stations: · Maximum sheet width: 300 - 350 mm · Controls: Dual console · Shaft diameter: 60 mm · End unit: Integrated cutting station · Current setup: Configured for classic Omega 60 mm, includes tooling for Omega 80 mm · Idle decoiler · Tooling box (approx. 1,000 kg) for producing other profile types Hnedpfoxugf Hjx Akrou · Dimensions: 10,000 x 1,400 x 1,600 mm (L x W x H) · Weight: 10 tons Maximum sheet width: 300 - 350 mm Controls: Dual console Shaft diameter: 60 mm End unit: Integrated cutting station Current setup: Configured for classic Omega 60 mm, includes tooling for Omega 80 mm

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Complete P20 & P30 HVAC Duct Flange Profile Roll Forming Lines with Butyl Sealant System For sale is a complete set of two professional roll forming lines for the production of P20 and P30 flange profiles, used in the manufacturing of rectangular HVAC ducts and fittings. The set includes: - P20 flange profile production line - P30 flange profile production line Hnedpfszx Rz Hox Akreu Both machines are equipped with an integrated butyl sealant application system. Depending on production requirements, the profiles can be manufactured with or without factory-applied butyl sealant. This provides full flexibility and allows the finished profiles to be adapted to different duct manufacturing technologies and customer requirements. The machines perform the complete production process – from coil decoiling, through multi-stage roll forming, to automatic cutting of the finished profile to the required length. Technical highlights - 18 roll forming stations - Automatic PLC-controlled cutting system - Production speed up to 9 m/min without sealant application - Production speed up to 5 m/min with butyl sealant application - Integrated butyl sealant application system - Complete production lines for P20 and P30 profiles Both machines are in very good technical condition. Since new, they have been used exclusively for the production needs of our own HVAC duct manufacturing facility. They have not been used for continuous mass production of profiles for commercial sale, therefore their overall level of utilisation is relatively low. Both production lines are fully operational, properly adjusted, tested and ready for immediate production. The machines are offered as a complete P20 + P30 set, allowing the buyer to establish in-house production of the two main flange profile sizes commonly used in the manufacturing of rectangular HVAC ducts and fittings. Relocation and commissioning support We can provide technical assistance with dismantling and relocation of the machines. We can also support the buyer with installation, adjustment, testing and commissioning at the new production facility, helping to ensure that both lines are properly set up and ready for production after relocation. The machines can be inspected while in operation, and production tests can be carried out prior to purchase. The indicated price is NET and VAT will be added where applicable.

Year of construction: 1992, condition: excellent (used), Roll forming machine Manufacturer: Abele & Höltich Type: BB 20 Year of manufacture: 1992 Roller diameter: 180 mm Power: 5.5 kW Voltage: 400 volts Space requirement: Width: 2400 mm Hsdpfx Aog Tcn Iekrsnu Depth: 2100 mm Height: 1800 mm Documentation available.

Year of construction: 1998, condition: excellent (used), machine/vehicle number: ExCello Serial Number 3888, MICHIGAN Rotoflo Type 3237 Cold Forming Machine. Hodpfsfnk Ehsx Akrenu Original Serial Number: 4590 ExCello Serial Number 3888 New 1975 rebuilt by ExCello late 1990’s Country of Origin: USA For the coldforming of profiles for serrations (straight or angular), spiral teeth, oil grooves, threads and knurls. Capacity: Maximum slide stroke 1065 mm Maximum rack length 915 mm Maximum profile diameter 50 mm Maximum profile length 125 mm Standard module range 0.3 to 1.25 Motor size 15 kW Hydraulic tank capacity 1000 l Overall floorspace width of machine 5014 mm Width of machine 2768 mm Depth with outboard support 4165 mm Height 2000 mm Approximate weight of machine 11,700 kgs Complete with: Hydraulically operated outer support assembly to accommodate part length universal headstock, Universal rack holding feature.

Condition: new, Fully automated machines for the trapezoid roll forming, in various sizes. Please, contact us in order to receive further information as well as the technical documentation. Hodeyr Nkbspfx Akrsnu

Year of construction: 1978, condition: ready for operation (used), A roll forming line by Instytut Obróbki Plastycznej (Poland) for plastic metal forming is available. Roll stations: 12, shaft diameter: 50mm, max. profile width: 300mm, max. profile thickness: 2mm, overall system dimensions X/Y: approx. 20m/4m. Including an automatic cut-off unit with an incremental length measuring system and a payoff reel. An on-site inspection is possible. Hsdpfx Akszhw Sweronu

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 550 mm, total length: 2,320 mm, total height: 1,000 mm, input voltage: 220 V, working width: 300 mm, spindle motor power: 750 W, warranty duration: 12 months, power: 0.75 kW (1.02 HP), overall weight: 410 kg, Equipment: CE marking, New Misirli seamless rain gutter roll forming machine (portable) for producing seamless gutters on site or in the workshop, directly from metal coil. Supplied new by the authorised Misirli sales and service partner in Sofia, Bulgaria. The machine forms aluminium, pre-painted steel, galvanised steel and copper coil into a U-section rain gutter, cut to any length the operator needs – no joints along the run. Technical data - Coil (strip) width: 300 mm - Material thickness: 0.40 – 0.60 mm - Materials: aluminium, pre-painted steel, galvanised steel, copper - Production speed: 10 m/min - Drive motor: 1 HP (0.75 kW), 2800 rpm, chain and gear drive - Power supply: 220 V AC, 50–60 Hz (single phase) - Machine dimensions (L x W x H): 2320 x 550 x 1000 mm - Weight: 410 kg Hnedpfx Akjz Dquborsu - Forming rolls: solid, CNC-machined, hard-chrome plated - Gutter profile: K-style (ogee), top width 127 mm (approx. 5"), bottom 85 mm, back height 85 mm, front height 90 mm Quality and compliance: CE marked, built according to the Machinery Directive and Low Voltage Directive, electrical equipment tested to EN 60204. All parts are manufactured in-house on CNC machines; spare parts are kept in stock. Larger versions also available: 330 mm strip (420 kg) and 370 mm strip (0.50–0.60 mm, 1.5 HP, 2860 x 730 x 1160 mm, 500 kg). Warranty: 1 year. Demonstration in Sofia possible.

Condition: new, New Technology Trapezoidal Sheet Roll Forming Machine consists of these parts; Hydraulic Roll Opening and Roll Loading Trolley, 10 T Polyethylene Protective Film Coating Unit, Metal Sheet Aligning Unit, Metal RollForm Generating Unit, 18 & 36 Stations According to Form Type, Flying Continuous Length Sizing Shear Unit, Automatic Stacking and Packaging Unit, Automatic Siemens Electric Control Unit. All of our machines have CE MARKING. Please contact us for additional information and technical documents. Hnsdpfxof Nqgho Akrsu

Condition: new, Year of construction: 2025, Lock former machine LFM is the one that is most required beyond our customers. It is used for forming ventilation locks such as Pittsburgh lock, standing seam lock, single hem, double hem, locking pin, elbow radius element. Those locks are widely used when construction process of different industrial and civil buildings. The advantage of our lock former machine compared to others machine is possibility to form pipe lock so you can use it while round pipes production. Hnedpfsf Epzcsx Akrju So our customers can save money on purchasing additional equipment and renting additional production areas. There are 7 pairs of forming rolls on the LFM machine to form different ventilation locks. Forming rolls are tempered so they have long life period. The process of ventilation element production is started from Pittsburgh lock forming process and single hem forming process with the lock forming machine LFM. After the process of locks forming are finished it’s necessary to put single hem lock into Pittsburgh lock and close it with a hummer or special Pittsburgh lock closing machine. After those procedures ventilation element is ready It’s very easy to work with our ventilation lock former machine LFM, because there are ruler guides so they help you to put metal in necessary forming position. Lock former machine LFM can be 380V (1.5kW engine power) or 220V (1.1-1.5kW engine power) depends on customer’s preferences. The machine is suited to work with color-coated metal sheets or stainless steel. We have been producing lock forming ventilation machines since 2008 year. So we have ready solutions for you to be the first Dimension: 110.00Sm x 51.00Sm x 100.00Sm Weight: 300.00Kg Maximum metal thickness: 1.2mm

Condition: new, Year of construction: 2025, Standing seam roof panel machine F3-39 (1.5 inches) Standing seam roof panel machine F3-39 logically complements the line of machines for double standing seam roof panels production we make. In Europe, the most common is 25 or 27mm lock high, but outside of Europe, in some parts of America and Canada regions seam metal roofing with 39mm lock high is also popular. That is why our company decided to start production equipment for such task, to expand sales geography, and to bring our products to more and more customers who may need it. Metal roof machine F3-39 has additional rolls for clip-relief rolling, which come as standard set of machine supply. Clip-relief is a small bend locating closer to the locks of panel and which make possible to hide fixation clips under the panel. Standing seam machine F3-39 has 8 pairs of main rolls to make the main part of the lock and a ninth stand to make clip-relief part. The rollers and base of machine are stronger comparing to standard version of equipment – roof panel roll forming machine F3. It has also rolls of bigger diameter to make 39mm (1.5 inches) lock. Despite all these increases, standing seam roof panel machine F3-39 is portable one, our customers can directly take it to construction place, and you can use it at the roof installation site as well. Thus giving the customer opportunity to reduce number of panel’s damages and the transportation cost. There is drawing of panel you can get with our F3-39 machine Hnodpfxsq U N T Rj Akrju Roof panel roll forming machine F3-39 can make panels with clip relief or without it, depends on customer preferences. Machine can work with coated materials or without coating as well. Suitable for steel coils, copper aluminum, zinc etc. It’s possible to adjust gaps between rollers depends on material thickness customer use for forming. Standing seam metal roof machine has easy adjustable system to change the width of the panels. The machine operator just need to rotate adjusting wheel to make it happens As additional options you can get Length measuring device to set up number and lengths of panels; Cross cutting knife for metal cutting; Rolls for ribbed panels production; Floor decoiler; Hand seamers for lock closing; Sliding clip formers; Fixed clip former. Our company can produce other machines for metal roofing production: Standing seam metal roof machine F3 for 25mm lock high; Standing seam machine F3-27 for 27mm lock high; Snap lock roof panel machine SL-1; Automatic snap lock metal roofing panel machine SL-1 auto;

Condition: repair required (used), Year of construction: 2007, Roller profiling line for manufacturing profiles for dry construction, without a hydraulic unit. Hnsdpfozy Ekfex Akrju Location: In our workshop.

Condition: ready for operation (used), Year of construction: 1989, - USED - ROLL FORMING MACHINE STEPS: N. 20 WEIGHT: 25000 Kg OVERALL DIMENSIONS: 7300 x 2400 x 1500 mm Hnsdpfxjzqwf No Akrou NOTE: PROFILE: WIDTH FROM 85 mm TO 670 mm; LENGTH FROM 2000 TO 5000 mm; THICKNESS FROM 0,6 TO 1,5 mm IN AUTOMATIC; No 5 4-STEPS HEADS; FORMING LINE FOR CABLE TROUGHS AND CABLE TRAY COVERS PRODUCTION; EQUIPPED WITH LOADING/UNLOADING ROLLER CONVEYORS

Condition: like new (used), functionality: fully functional, Brand New C50–160 Automatic Roll Forming Machine | Solar Mounting Structures | Ready Stock China PRICE & AVAILABILITY * Price per Machine: USD 79,900 – FOB China * Price for Both Machines: USD 155,000 – FOB China Hnsdpfx Aez Ny Icokrou * Condition: Brand New / Unused * Quantity: 2 Complete Production Lines * Location: China * Availability: Ready Stock – Immediate Availability PRODUCT DESCRIPTION: Two brand-new, fully automatic C50–160 Roll Forming Production Lines, designed for manufacturing solar mounting structures and industrial C-channel steel profiles. Both machines are fully manufactured and available from stock in China, eliminating standard manufacturing lead times. Each production line features computer-controlled automatic profile size adjustment, integrated hydraulic punching, servo-follow hydraulic cutting, and PLC touchscreen control. The machines are suitable for solar mounting structure manufacturers, steel profile producers, and industrial fabrication companies. TECHNICAL SPECIFICATIONS * Model: C50–160 Automatic Roll Forming Line * Material Thickness: 2–4 mm * Profile Range: C50–160 mm * Material: Q235–Q345 Steel / Al-Mg-Zn Coated Steel * Forming Speed: 20–25 m/min * Forming Stations: 16 * Main Motor Power: 22 kW * Uncoiler Capacity: 5 Tons * Profile Size Adjustment: Computer-Controlled Automatic * Punching System: Hydraulic – Oblong & Bottom Holes * Cutting System: Servo-Follow Hydraulic Cutting * Control System: PLC Touchscreen * Power Supply: 380V / 50Hz / 3 Phase * Approximate Machine Weight: 15 Tons per Line COMPLETE PRODUCTION LINE INCLUDES * 5-Ton Uncoiler * Leveling and Feeding System * Hydraulic Punching Unit with Molds * Automatic Roll Forming Main Machine * Servo-Follow Hydraulic Cutting System * Receiving Tables * PLC Electrical Control Cabinet * Cooling Circulation System * Spare Parts as Specified KEY SELLING POINTS * Brand-new, unused production equipment * Ready stock in China * Immediate availability without manufacturing waiting time * Computer-controlled automatic profile size adjustment * Integrated hydraulic punching and servo-follow cutting * Suitable for solar mounting structure production * Competitive FOB China pricing * Available individually or together Technical documentation, and inspection arrangements are available upon request. Contact us for any further technical details.

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 2,300 mm, total length: 9,000 mm, total height: 2,300 mm, overall weight: 9,000 kg, Mobile Roll Forming Machine for Frameless Steel Arch Buildings Automatic Production Line for Self-Supporting Steel Hangars and Arch Roofs The mobile roll forming machine is designed for the on-site production of self-supporting curved steel panels used for the construction of frameless steel buildings, arch hangars and self-supporting metal roofs. The technology makes it possible to construct large-span steel buildings without a conventional internal steel frame. Steel coil is formed into a structural profile, cut to the required length and then curved to the required building radius. Several curved panels are connected together using a special seaming machine to form a strong, continuous and self-supporting arch structure. The equipment can be used for the construction of: frameless steel hangars aircraft hangars agricultural buildings grain and machinery storage buildings warehouses industrial buildings workshops garages livestock buildings sports facilities self-supporting steel roofs temporary buildings military and logistics storage facilities Mobile Production Directly at the Construction Site One of the main advantages of this technology is the possibility of producing the complete structural panels directly at the construction site. The main forming and curving equipment is installed on a mobile trailer chassis. The machine can therefore be transported to the building site, where steel coils are converted into finished structural arch panels. This is particularly important for long panels that would otherwise be difficult or expensive to transport. The supplied machine has two axles and eight tyres intended for movement around the construction site. Hedpjztwx Uofx Akrenu Production Process The complete production process consists of several stages: Steel Coil → Decoiling → Straight Profile Forming → Cutting to Length → Curving → Panel Seaming → Lifting → Installation The supplied technical manual describes the machine as a combination of a roll forming section and an arch bending section, with electrically driven forming and bending and hydraulic cutting. Main Technical Specifications Parameter Specification Machine type Mobile arch sheet roll forming line Application Frameless / self-supporting steel buildings Feeding width 1000 mm Effective profile width Approx. 610 mm Material thickness 0.8–1.5 mm Forming stations 13 + 1 Straight panel forming speed Up to 15 m/min Arch panel forming / curving speed Up to 13 m/min Seaming speed Approx. 6 m/min Forming motor 7.5 kW Curving / bending motor 5.5 kW Cutting motor 4.0 kW Additional drive 3.0 kW Total installed motor power Approx. 20 kW Cutting system Hydraulic Cutting tool material Cr12MoV, heat treated Roll material 45# steel, chromed and hardened Roller hardness HRC 58–62 Control system PLC Machine dimensions Approx. 9000 × 2230 × 2200 mm Machine weight Approx. 9000 kg Chassis 2 axles / 8 tyres Different Profile Sizes Available The machine can also be manufactured for different structural profile dimensions according to the required building span and application Available configurations may include different: coil feeding widths finished profile widths profile depths steel thicknesses arch radii building spans For example, depending on machine configuration, profiles can be designed for relatively small buildings as well as large-span self-supporting arch structures

Condition: excellent (used), Year of construction: 2008, For Sale: Very good condition. Industrie Rex I + spreading belts + hopper with oil lubrication 5/4 row Hnjdpfx Asw Ebw Iekrju range: 40 - 100 grams Siemens S7 program completely complete Videos available showing operation It is possible to inspect the machine at our location. If you have any questions or remarks, please feel free to contact us. Transport by arrangement Kind regards, Leo Holland