Used Ulmia 1728 for sale (27)

Condition: used, Year of construction: 1987, With new electrics – electronic brake – automatic star-delta start-up. Machine overhauled, various parts replaced, cleaned – function-tested – fully adjusted – trial cuts. Used, in good condition Manufacturer: Ulmia Model: 1728 Year of manufacture: 1987 Machine no.: 262 GS-certified Reinforced motor 5.0 kW Steel guides Gedpfjvwgibex Abfjuf Carriage length approx. 1600 mm Cutting width approx. 950 mm Cutting length (sliding table travel) 1900 mm Cutting height approx. 105 mm Max. blade diameter 350 mm Tiltable up to 45° Parallelogram guard Weight approx. 600 kg Storage location: 97447 Gerolzhofen, free loaded, unpacked Handover in as-inspected condition, without warranty or guarantee

Condition: excellent (used), Year of construction: 1987, Circular saw Manufacturer: Ulmia Type: 1712 Year of manufacture: 1987 Gedpfx Aeztnx Eobfsuf Table: 800 x 710 mm Saw blade diameter: 350 mm Cutting height: 125 mm Power: 3 kW Bevel angle: 45° Motor brake: Yes Weight: approx. 500 kg

Condition: used, The Ulmia 1622 table saw is designed for precise rip and cross cuts in solid timber and wood-based materials. Its robust construction ensures reliable performance in craft workshops and general workshops. Ideal for joinery as well as general timber and furniture making. Gedpfozryvtex Abfjuf Technical data: - Table size: 560 x 710 mm - Saw blade diameter: max. approx. 300 mm - Motor: 1.5 kW

Condition: ready for operation (used), Max. cutting height: 87 mm Max. cutting length approx.: 200 mm Saw blade diameter max.: 250 mm Saw blade speeds via gearbox approx.: 90 - 4000 rpm Drive motor: 380 V, 1.2 kW Guodpfxjznh Hfo Abfsf Space requirement: 1050 x 750 x 1100 mm Weight approx.: 210 kg

Condition: excellent (used), Year of construction: 1982, Ulmia table saw Type 1710 S Make No. 2943 Year of manufacture 1982 With sliding table Swivel saw blade Saw blade maximum diameter 250 mm Maximum cutting height 75 mm at 90° Gsdpor Elmwjfx Abfouf Maximum cutting height 52 mm at 45° Motor power 2.2 kW Sliding table Sliding table travel 750 mm Height to top edge of table 850 mm Suction connection diameter 100 mm Weight: 121 kg Location: ex stock 54634 Bitburg - immediately available -

Condition: reconditioned (used), Year of construction: 1995, functionality: fully functional, Nominal volume flow Vnenn 750 m³/h, suction nozzle D=100 mm, minimum volume flow Vmin 565 m³/h, negative pressure 14.5 mbar, motor 1.1 kW, nominal speed 2860 rpm, connection 380V 3Ph 50Hz - Guodpjv Azfzefx Abfjf

Year of construction: 1980, condition: good (used), Underfloor sliding table saw, crosscut saw, sliding table saw, miter saw, panel saw, table saw, circular saw -Manufacturer: Ulmia, circular saw type 1612SP -Motor power: 2.2 kW / 2800 rpm Godpfx Abof D H Hbjfjuf -Saw blade: Ø 280 mm -Sliding carriage: is available -Max. cutting height 70 mm -Miter cut: up to 45° -Length stop: up to approx. 800 mm -Dimensions 1000/1340/H980 mm -Weight: 306 kg

Condition: good (used), Panel saw, table saw, heavy precision circular saw, metal circular saw, cold circular saw -Sliding carriage: 200 mm -Speeds: 90-4000 rpm -Cutting width: 710 mm -Saw blade diameter: max. 260 mm -Max. Cutting height: 40 mm Gjdpsctvp Tefx Abfouf -Height adjustment -Transport dimensions: 1450/900/H1100 mm -Weight: 254 kg

Condition: excellent (used), Year of construction: 1982, Table saw ULMIA 1710s Year of construction 1982 Tilting angle 45° Cutting length on cart 750mm Blade diameter max 250mm. Gsdjufgnzspfx Abfjuf Cutting height 75mm. Cutting width between the saw and the attachment 650 mm Scale carriage for cutting angles Table size 1000x630mm

Condition: good (used), Year of construction: 1984, functionality: fully functional, From business closure: Ulmia 1710R Year of manufacture: 1984 380 Volt Mitre cuts up to 45° Max. cutting height: 50 mm Sliding table travel: 200 mm Table size: 800x500 mm Supplied with the accessories shown. Gujdoy Iutbepfx Abfef

Condition: used, Year of construction: 1982, From business liquidation: Guodpfx Aboxq N T Eofef Ulmia 1710S Year of manufacture: 1982 Mitre cuts up to 45° Maximum cutting height at 90°: 75mm – at 45°: 50mm Saw blade: 250mm Table size: 630x500mm 380 Volt Cutting width to the right of the saw blade: 650mm The machine is operational, but shows heavy signs of use!

Year of construction: 1980, condition: good (used), Ulmia circular saw 1630 Saw blade dimensions Ø max. 300 mm Speed range 95 - 3000 rpm Total power 1.1 kW Machine weight Gedpfjd Ddgpjx Abfouf 270 kg Space requirement (W x D x H) 0.9 x 0.73 x

Condition: excellent (used), 3.2 kW motor Cutting height 7 cm With 45-degree angles Table width 50 cm Table length 60 cm Guedpfoy Aagpex Abfof

Condition: used, Year of construction: 1981, machine/vehicle number: 2383, table size: 630 x 500 mm saw blade diameter: max. 250 mm curring height: 77 mm saw blade rotations: 6300 rpm Gedpfsb H Infox Abfeuf electric drive: 380 V, 2,2 kW space needed: 800 x 680 x 840 mm

Condition: used, Three-phase motor with 2 speeds, electric motor -Power: 5.5/6.6 kW -Speed: 1440/1728 rpm -Shaft: Ø 38 x 80 mm -Construction: B5 -Protection class: IP 55 -Dimensions: 440/300/H315 mm -Weight: 43 kg Godpfx Abed S Spcjfjuf

Year of construction: 2001, condition: good (used), 2 units of axially split spiral casing pumps with motor and baseplate. Last application as a turbine. !!! Performance curves as a pump and as a turbine are included as images !!! Manufacturer: KSB Type: Omega 350-360 A Flow rate: 1728 m³/h Head: 32 m Speed: 1450 rpm Year of manufacture: 2001 In turbine operation: Motor: VEM G21R 280 S4 Power: 75 kW at approximately 20 meters head and 1600 m³/h Voltage: 400 V In pump operation: Required shaft power: 177 kW Required electric motor: 200 kW NPSH value: 6.9 Gsdpfjd Nqi Rjx Abfsuf Efficiency: 85.28% Maximum operating temperature: 140°C Speed sensor: Yes !! Price per unit !!

Condition: used, mileage: 172,922 km, power: 221 kW (300.48 HP), first registration: 11/2011, tire size: 315/80R22.5, axle configuration: 6x4, wheelbase: 4,230 mm, color: red, gearing type: mechanical, emission class: euro5, suspension: steel, loading space length: 5,510 mm, loading space width: 2,470 mm, loading space height: 600 mm, Year of construction: 2011, Equipment: air conditioning, Technical information Number of cylinders: 6 Engine capacity: 7.146 cc Drivetrain Drive: Wheel Make of engine: Volvo Axle configuration Tyre size: 315/80R22.5 Suspension: leaf suspension Rear axle 1: Double wheels Rear axle 2: Double wheels Weights Empty weight: 12.870 kg Carrying capacity: 13.130 kg GVW: 26.000 kg Functional Tipper: Back Guodpoucyp Hsfx Abfof = Additional options and accessories = - PTO - Tipper hydraulics

Condition: used, maximum load weight: 35,560 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 01/2026, next inspection (TÜV): 01/2027, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately and in the short term, on our website. Excerpt from the equipment list. Complete equipment available upon request. Chassis Regular ladder frame in lightweight steel construction with continuous crossmembers. Coupling plate, 8 mm thick, with a 2-point kingpin according to DIN 74080 / ISO 337. Suspension Axle lift mechanism on axle 1. Manufacturer of choice: Kögel - three-axle unit with disc brakes, Ø 430 mm, offset approx. 120 mm. Air suspension with approx. 180 mm travel. Vehicle tires Tires: 6x 385/65 R 22.5 UNIROYAL TH 50. Chassis components Kingpin supports (manufacturer of choice from Kögel), mechanically operated with leveling support, lifting capacity approx. 24 tons. One-sided operation on the right side when traveling. Spray protection system (spray mist suppression) according to Regulation (EU) No. 109/2011 for a three-axle unit with tires 385/65 R22.5, consisting of 1 pair of quarter-circle fenders in front of the axles, 1 pair of straight fenders with spray flaps between the 1st and 2nd axles, and 1 pair of quarter-circle fenders with spray flaps behind the axles. Toolbox for storing: 10 side panels, folding stanchions, and rear door or rear flap. Fully enclosed, protected against spray, and also serves as a side protection device. Ground clearance (front): 220 mm. 2 plastic toolboxes, waterproof, dimensions (internal) approx. 545 x 400 x 400 mm. Installation at the rear, 1x on the left and 1x on the right. High, rigid underrun protection at the rear made of steel according to ECE-R58. 1 pair of retractable warning signs for overwidth loads, retro-reflective red/white, with LED lighting, spiral cable, and plug connection. Arrangement in the front and rear areas of the vehicle. Brake/air suspension system EBS system 2S/2M with stability program (includes ABS/ALB function), EBS plug connection ISO 7638 (without connection lines), parking brake as a spring brake, external pneumatic connections and external EBS diagnostic connection via ISO 7638 plug connection. WABCO EBS system. Air suspension system incl. 1 lifting and lowering valve, mounted on the left side behind the axle unit when traveling. Driving position is automatically adjusted. 2 tamper-proof coupling heads in the front ISO 1728 34410.010. Air reservoir for brake system and air supply made of steel (EN 286-2). Floor Plate floor approx. 30 mm thick. Floor sealed around the perimeter. Pocket for square tube inserts, approx. 80 x 80 mm, arrangement according to drawing J9: 8 pieces of pocket strips (18 pockets per strip: 4 pieces each on the outside + 10 pieces in the middle). Superstructure Meets superstructure strength according to EN 12642 XL (VDI 2700). Tested for a payload of approx. 27,000 kg. Front wall Storage for max. 14 square tube inserts, approx. 80 x 80 mm (length approx. 1,990 mm) on the inside of the front wall. Front wall approx. 2,000 mm high with steel corner posts, with profiled steel sheet, screwed/riveted to the frame. 2 pairs of lashing points (permissible lashing force approx. 1,000 kg per ring) on the front panel according to EN 12640. Rear wall Gujdpfxezth E Es Abfjf Foldable rear wall approx. 600 mm made of aluminum hollow profiles with 3 tensioners and T-latch locks, 2 foldable steps on the inside. Foldable steel corner posts at the rear at the height of the side panels. Side wall 4 pairs of folding stanchions at the height of the side panels, 43540.380 VarioFix steel hol

Condition: used, maximum load weight: 35,350 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 06/2026, next inspection (TÜV): 06/2027, Equipment: ABS, Excerpt - Equipment Frame 10110.122 Regular ladder frame in lightweight steel construction with continuous cross members. 10115.010 With chassis frame pre-tension. 10300.108 Coupling plate approx. 8 mm thick, with a 2-inch drawbar eye according to DIN 74080 / ISO 337. Chassis I 17160.010 Axle lift mechanism on axle 1. I 17165.103 Axle lift control fully automatic, load-dependent. Starting assistance: Activated by pressing the brake 3 times. 30% overload up to a speed of 25 km/h. 18330.700 Manufacturer of choice: Kögel - Three-axle unit, with disc brakes Ø 430 mm, approx. 120 mm mounting depth. Air suspension with approx. 180 mm travel. Vehicle tires I 20540.037 Tires 6x 385/65 R 22.5 BRIDGESTONE R179 XM 160 K (158 L). Chassis components 20110.010 Kingpin supports (manufacturer of choice: Kögel) mechanical with leveling foot, approx. 24 t lifting capacity. Single-sided operation on the right side in the direction of travel. I 21070.117 Splash guard system (spray mist suppression) according to Regulation (EU) No. 109/2011 for three-axle unit with tires 385/65 R22.5, consisting of 1 pair of quarter-circle fenders in front of the axles, 1 pair of straight fenders with splash flaps between the 1st and 2nd axles, and 1 pair of quarter-circle fenders with splash flaps behind the axles. 21300.001 2 chock blocks with holder. I 22070.008 Deletion of the standard side protection. I 25010.170 Storage box for storing: 10 side panels, folding battens and rear door or rear flap. Fully enclosed, protected against spray, simultaneously serves as side protection. I 25090.220 Ground clearance (front) approx. 220 mm. I 25620.101 2 plastic toolboxes, waterproof, dimensions (internal) approx. 545 x 400 x 400 mm. Installed at the rear, 1x on the left and 1x on the right. I 26110.005 Deletion of access ladder. 27510.010 High, rigid underrun protection at the rear made of steel according to ECE-R58. I 71800.020 1 pair of retractable warning boards for overwidth loads, retroreflective red/white, with LED lighting, spiral cable and plug connection. Arrangement in the front and rear vehicle area. Brake/Air suspension system Gsdpfxezrkbge Abfouf 32110.057 EBS system 2S/2M with stability program (includes ABS/ALB function), EBS plug connection ISO 7638, (without connection lines), parking brake as spring brake, external pneumatic connections as well as external EBS diagnostics connection via ISO 7638 plug connection. I 32125.010 EBS system (manufacturer of choice). 33420.040 Air suspension system incl. 1 lifting and lowering valve, mounted on the left behind the axle unit in the direction of travel. Driving position is automatically adjusted. 34320.001 2 non-interchangeable coupling heads at the front, ISO 1728. 34410.010 Air reservoir for brake system and air reserve made of steel (EN 286-2). Floor 40510.120 Plate floor approx. 30 mm thick. I 40513.020 Floor sealed around the perimeter. I 40542.023 Girder pockets for square tube inserts approx. 80 x 80 mm, arrangement according to drawing J9: 8 pieces of girder pocket rails (18 girder pockets per rail: 4 pieces each on the outside + 10 pieces in the middle). Superstructure I 46538.010 Meets superstructure strength according to EN 12642 XL (VDI 2700). Tested for a payload of approx. 27,000 kg. Front wall I 40532.260 Storage for max. 20 square tube inserts approx. 80 x 80 mm (length approx. 1,990 mm) on the inside of the front wall. I 41710.201 Front wall approx. 2,000 mm high with volume corner supports made of steel, with profi

Condition: used, maximum load weight: 35,750 kg, overall weight: 39,500 kg, axle configuration: 3 axles, first registration: 10/2022, next inspection (TÜV): 10/2026, Equipment: ABS, Excerpt from the equipment list. Complete equipment available upon request. Braking system according to ECE-R13 Electrical system according to ECE-R48 The Kögel superstructure guideline must be observed! It can be accessed at [website address] Frame Chassis frame made of high-quality steel, but without an outer frame Coupling plate with a 2-inch kingpin according to DIN 74080 / ISO 337 With cross member and container locking mechanisms for accommodating: a) 1 x 40' High-Cube container (frame extended), b) 2 x 20' ISO containers (frame extended), c) 1 x 30' ISO container flush at the rear (frame extended), d) 1 x 20' ISO container flush at the rear (frame retracted), e) 1 x 20' ISO container in the middle (frame retracted) 4 pairs of heavy-duty lashing rings Frame extension at the rear, extendable by approx. 1,370 mm, load capacity 5,800 kg, with spiral cable, adjustable in length via 1 pneumatic cylinder, low-maintenance guide on special plastic sliders and 2 extension rollers Automatic pneumatic locking of the extension Suspension Axle lift mechanism on axle 1 Control of the axle lift fully automatic, load-dependent Starting aid: activation via 3x brake, 30%, overload up to a speed of 25 km/h Operation on the chassis via switch, also possible from the driver's cab (switch in the cab required - PIN 12) Three-axle unit SAF INTRADISC, with disc brakes Ø 430 mm, ET 120 Air suspension with approx. 180 mm travel Vehicle tires Tires 6-fold 385/55 R 22.5, 160J 6 steel rims 22.5 x 11.75, offset 120 mm (ET 120) Chassis components Landing gear, mechanical with leveling foot, 24 t lifting capacity, single-sided operation on the right-hand side while driving Godpfozkx Ifox Abfjuf Spray protection system (spray mist suppression) according to Regulation (EU) No. 109/2011 for three-axle unit with 22.5 tires, consisting of: 3 pairs of semi-circular fenders with spray flaps 2 chock blocks with bracket Lateral protection device, according to ECE-R73, closed Underrun protection made of square steel tube according to ECE-R58 with a light carrier arranged above, protected Height of the underrun protection profile min. 120 mm, designed for increased test forces Brake / Air suspension system EBS system 2S/2M with stability program (includes ABS/ALB function), EBS plug connection ISO 7638, (without connection cables), parking brake as spring brake, external pneumatic connections and external EBS diagnostic connection via ISO 7638 plug connection Air suspension system incl. 1 raising and lowering valve, mounted on the left-hand side in the direction of travel in front of the axle unit 2 non-interchangeable coupling heads at the front ISO 1728 Air tanks for braking system and air supply made of steel (EN 286-2) Rear impact guard Solid steel rear impact guard on the rear end cross member Electrical system / Electronics Light carrier made of steel, arranged above the underrun protection KÖGEL LUXIMA Premium package, consisting of: LED license plate lighting, LED side marker lights and reflectors at the front, flashing LED side marker lights, Superseal and bayonet connectors for the lights 2 LED outline lights with arm, mounted on multi-chamber tail light 2 LED multi-chamber tail lights (without LCG) Plug connection at the front, 15-pole ISO 12098 (without connection cables) Corresponds to vehicle class FL, AT Information systems Kögel Telematics System BasicTrailer incl. location monitoring, coupling status, EBS data The monthly fees are regulated in a separate contract Signage Orange

Condition: used, maximum load weight: 36,250 kg, overall weight: 41,000 kg, axle configuration: 3 axles, first registration: 10/2025, next inspection (TÜV): 10/2026, Equipment: ABS, Excerpt from the equipment list. Complete equipment list available upon request. Frame: Chassis frame made of high-quality steel, but without an outer frame. Coupling plate with a 2-inch drawbar eye according to DIN 74080 / ISO 337. With crossmember and container locking mechanisms for accommodating: Guodozkx Hzspfx Abfof a) 1 x 45' High-Cube container b) 1 x 40' High-Cube container c) 1 x 30' ISO container, flush at the rear d) 2 x 20' ISO containers e) 1 x 20' ISO container, flush at the rear g) 1 x 45' ISO container h) 1 x 40' ISO container With 1 pair of height-adjustable container locking mechanisms and 3 pairs of foldable center supports, plus crossmember and container locking mechanisms for accommodating: f) 1 x 20' ISO container in the center Frame extension at the rear, mechanically extendable, load capacity approx. 5,800 kg, with spiral cable. Low-maintenance guidance on special plastic sliders and 2 extension rollers. KÖGEL frame extension at the front, manually extendable and mechanically lockable, incl. container guide on the left and right. Designed according to Directive 719/2015. Frame extension in the center, manually extendable and mechanically lockable with the tractor unit. Chassis: Axle lift mechanism on axle 1. Control of the axle lift is fully automatic and load-dependent. Starting aid: Activation via 3x brake, 30% overload up to a speed of 25 km/h. Operation on the chassis via switch. Additionally possible from the cab (switch in the cab necessary - PIN 12). When transporting 30' and 45' containers, the 1st axle CANNOT be lifted! BPW three-axle unit, with disc brakes Ø approx. 430 mm, mounting depth approx. 120 mm. Air suspension with approx. 180 mm travel. Vehicle Tires: Wheels with internal sensors according to UN ECE R141. Tires 6-fold 385/55 R 22.5 UNIROYAL TH 50. 6 steel rims 22.5 x 11.75, mounting depth approx. 120 mm (ET 120). Chassis Components: JOST landing gears, mechanically operated with leveling foot, 24 t lifting capacity. One-sided operation in the direction of travel, on the right. Splash guard system (spray suppression) according to Regulation (EU) No. 109/2011 for three-axle unit with 22.5 tires, consisting of: 3 pairs of semi-circular fenders with mud flaps. 2 chock blocks with holder. Side protection, according to ECE-R73, closed. Rear underrun protection made of square steel tube according to ECE-R58, screwable. Height of the underrun protection profile min. 120 mm, designed for increased test forces. Brake / Air Suspension System: EBS system 2S/2M with stability program (includes ABS/ALB function), EBS plug connection ISO 7638 (without connection cables), parking brake as spring brake, external pneumatic connections as well as external EBS diagnostic connection via ISO 7638 plug connection. Air suspension system incl. 1 raising and lowering valve, mounted on the left in the direction of travel in front of the axle unit. 2 non-interchangeable coupling heads at the front ISO 1728. Air reservoir for brake system and air supply made of steel (EN 286-2). Rear Impact Protection: Continuous steel rear impact protection, solid, on the end member at the rear. Information Systems: Tire pressure monitoring system according to UN ECE R141. Accessories: Document tube, diameter approx. 105 mm. Mounting on the left in the direction of travel on the side protection. 1 fire extinguisher 6 kg with pressure gauge (European approval). Mounting incl. holder and protective cover on the left in the direction of travel o

Condition: used, maximum load weight: 34,250 kg, overall weight: 39,500 kg, axle configuration: 3 axles, first registration: 10/2022, next inspection (TÜV): 04/2027, Equipment: ABS, Excerpt from Equipment List: 09010.001 Braking system in accordance with ECE-R13 09020.001 Electrical system in accordance with ECE-R48 09050.001 The Kögel superstructure guideline must be observed! It can be accessed at [URL removed]. Chassis 10110.020 Chassis frame made of high-quality steel, but without an outer frame. 10300.010 Coupling plate with a 2-inch fifth-wheel coupling pin according to DIN 74080 / ISO 337 11110.105 With cross member and container locking mechanisms for accommodating: a) 1 x 40' High-Cube container (frame extended) b) 2 x 20' ISO containers (frame extended) c) 1 x 30' ISO container flush at the rear (frame extended) d) 1 x 20' ISO container flush at the rear (frame retracted) e) 1 x 20' ISO container in the middle (frame retracted). 15200.140 4 pairs of heavy-duty lashing rings 27850.030 Rear frame extension, extendable by approx. 1,370 mm, load capacity 5,800 kg, with spiral cable. Length adjustable via 1 pneumatic cylinder, low-maintenance guide on special plastic slides and 2 extension rollers. Automatic pneumatic locking of the extension. Suspension I 17160.013 Axle lift mechanism on axle 1 Godjzkx Hnspfx Abfeuf I 17165.113 Axle lift control fully automatic, load-dependent. Start assist: activation via 3x brake, 30% overload up to a speed of 25 km/h. I 17170.010 Operation on the chassis via switch. Also possible from the cab (switch in the cab required - PIN 12). I 18330.210 Three-axle unit SAF INTRADISC, with disc brakes Ø 430 mm, offset 120. Air suspension with approx. 180 mm suspension travel. Vehicle Tires 20540.170 Tires 6x 385/55 R 22.5, 160J (manufacturer of our choice) 20865.005 6 steel rims 22.5 x 11.75, offset 120 mm. Chassis Components 20110.010 Fifth wheel (manufacturer at Kögel's choice) mechanically with equalizing plate, 24 t lifting capacity. Single-sided operation on the right when driving forward. 21070.169 Splash guard system (spray mist suppression) according to Regulation (EU) No. 109/2011 for three-axle unit with 22.5 tires, consisting of: 3 pairs of semi-circular mudguards with spray flaps. 21300.001 2 chock blocks with holder I 22070.020 Lateral protective device, according to ECE-R73, closed. 27510.050 Underrun protection made of square steel tube according to ECE-R58 with a lamp carrier arranged above, protected. 27511.010 Height of the underrun protection profile min. 120 mm, designed for increased test loads. Brake / Air Suspension System 32110.058 EBS system 2S/2M with stability program (includes ABS/ALB function), EBS connection ISO 7638, (without connecting lines), parking brake as spring brake, external pneumatic connections and external EBS diagnostic connection via ISO 7638 connection. 33420.070 Air suspension system incl. 1 raising and lowering valve, mounted on the left side when driving forward in front of the axle unit. 34320.001 2 non-interchangeable coupling heads in front ISO 1728 34410.010 Air reservoirs for the brake system and air supply made of steel (EN 286-2). Rear Impact Guard 42551.040 Solid steel rear impact guard at the rear end beam. Electrical / Electronics 60500.021 Lamp carrier made of steel, arranged above the underrun protection. 61100.220 KÖGEL LUXIMA Premium Package, consisting of: - LED license plate lighting, LED position lights and reflectors in front - flashing LED side marker lights - Superseal and bayonet connectors for the lights I 61500.110 2 LED outline lights with arm, mounted on multi-chamber tail light I 61910.120 2 LED multi-chamber lights

Condition: used, functionality: fully functional, machine/vehicle number: 6444164, Year of construction: 2016, operating hours: 1,728 h, load capacity: 1,600 kg, lifting height: 5,400 mm, fuel type: electric, mast type: triplex, construction height: 2,360 mm, fork length: 1,200 mm, drive type: Elektro, Electric high-lift stacker Gusdsw I H Ngepfx Abfjf Chassis number: 6444164 Mast type: Triplex Technical condition: Normal Battery voltage: 24V Description: BT SWE 160 No.: M0516 Year of manufacture: 2016 Operating hours: 1728 The unit is in good visual and technical condition. Errors and prior sale excepted. If you have not found the forklift you are looking for, please contact us. We have a large selection of additional machines on site.

Condition: new, axle configuration: 2 axles, total width: 25,500 mm, total height: 32,600 mm, Equipment: ABS, Humbaur HBT 106224 BS Basic, sloped Technical data: Internal dimensions: approx. 6,200 mm x 2,450 mm x 400 mm Overall dimensions: approx. 8,400 mm x 2,550 mm x 3,260 mm Permissible total weight: 11,900 kg Payload: approx. 9,100 kg Wheelbase: 990 mm Tires: 235/75 R17.5 inches Loading height: approx. 920 mm Drawbar length: approx. 1,800 mm Coupling height: approx. 750-1000 mm Ramp angle: approx. 16° Plank length: approx. 2,600 mm Plank width: approx. 540 mm 3 pairs of lashing rings, 3,000 kg per lashing point, lashing rings recessed in the floor 7 pairs of lashing rings, 1,000 kg per lashing point, lashing rings in the outer frame Guedpfx Abeyfvg Aefef Standard equipment: Axles: axles from renowned manufacturers Suspension: low-maintenance parabolic suspension with load compensation Tires: tires according to the manufacturer's choice on steel rim Braking system: ABS braking system according to ECE directive with ALB function, ABS plug connection ISO 7638, spindle parking brake, 2 fail-safe coupling heads red/yellow ISO 1728 Towing device: drawbar with DIN screw eye Ø 40 mm, galvanized, steplessly adjustable via crank Electrical system: 24V lighting system with multi-chamber tail lights and LED side marker lights, 15-pin connector for lighting Frame: solid, welded and hot-dip galvanized frame, sloped rear area, incline 12° Floor: floor made of 40 mm softwood planks Side walls: side walls made of anodized aluminum, foldable and removable on the side, corner posts galvanized, pluggable at the front and rear Ramps: 2 foldable steel ramps, 1-piece, galvanized, laterally adjustable, ramp lift 1 gas spring per ramp, ramp locking on the rear crossmember, ramp surface made of galvanized grating Support: reinforced 12 t geared support with load and quick gear, 2 telescoping folding supports on the left and right at the rear of the vehicle Equipment: steel fenders with anti-spray mats, side impact protection up to the 1st axle, foldable, 2 chock blocks with holder, contour marking on the side and rear, space for a two-line license plate on the left ramp On request, we will provide you with a leasing or financing offer. Mr. Seidel (Tel.) will be happy to assist you. You can find more information on our website. ... Errors, changes and prior sale reserved!!! = Further information = GVWR: 11,900 kg Please contact Tobias Ebert for further information.

Condition: excellent (used), Year of construction: 2016, Kaeser BB89C blower unit No. 2218 2016; 15 kW; 1.02 bar Kaeser Omega 23 P blower Guedpfszcx Dxox Abfof No. 1728; 2016; Siemens motor, No. 1LE10031CA734AB4-Z No. 1AV3137A, 15 kW; 2950 rpm