Used Unbekannt Holder For Pull And Lead Screw for sale (25,358)

Condition: good (used), Counterholder, counter bearing, bearing block, pillow block, holder for draw and lead screw, draw and lead screw holder, spindle holder -Holder: for pull and lead screw -Dimensions: see photos Kdodpfsv Tli Sox Akwet -Transport dimensions: 160/120/H400 mm -Weight: 14.7 kg

Condition: good (used), Counterholder, counter bearing, bearing block, pillow block, holder for draw and lead screw, draw and lead screw holder, spindle holder -Holder: for pull and lead screw Ksdov Tlkpjpfx Akwsdt -Dimensions: see photos -Transport dimensions: 105/155/H450 mm -Weight: 11.3 kg

Condition: excellent (used), This system If designed to continuously cool veg products in glycol chilled water what was bought new by our customer to chill sachets of hot sauces and soups at 2500 KG per hour. Available separately or as a line with infeed and outfeed conveyors. Kdsdpfxsh Uyg Ns Akwjt

Condition: excellent (used), Conveyor belt, belt conveyor, transport belt, belt conveyor, steep conveyor, steep conveyor belt, flat belt conveyor -Conveyor belt: Transport belt, stainless steel housing -Total conveyor belt width: 90 mm / 2 x 40 mm belt width -Conveyor belt length: 550 mm, dimensions see photos -Drive shaft: Ø 25 mm Kdsdpfx Aksxr Apcewot -Individual components: see photos -Overall dimensions: 600/500/H180 mm -Weight: 27.8 kg

Condition: used, Line for forming cevapcici and cevapi (grinder with mixer, portioning device and belt transporter) Kodjg Atrvopfx Akwodt

Condition: excellent (used), Year of construction: 1991, Сryogenic gas tank used for oxygen, nitrogen, argon, and carbon dioxide (CO2). Manufacturer: Harsco (Germany) Year of production: 1991 Kdsdpfx Aoyuu Scskwot Vacuum isolation: with certificate. We also have a variety of other tanks available for different industrial gases. Please contact us with your specific requirements, and we would be happy to assist you.

Condition: new, functionality: fully functional, Year of construction: 2026, Dry and Wet Ball Mill: Structure, Operation, and Technical Details A ball mill is a fundamental grinding device used in mineral processing, cement manufacturing, chemical production, and other industrial applications. It works by rotating a cylindrical shell filled with grinding media—usually steel balls—causing impact and friction that reduce materials to fine powder. Based on the grinding environment, ball mills are classified into dry and wet types, each suited for specific materials and process requirements. Working Principle Both dry and wet ball mills operate on the same mechanical principle. The rotating cylinder, driven by a motor through a gear system, lifts the grinding media and material along the inner wall. As the rotation continues, the balls fall under gravity, striking and grinding the material. The difference lies in the presence or absence of a liquid medium during grinding. Dry Ball Mill A dry ball mill is used when the material must remain moisture-free or when water could affect product quality. It is commonly applied in cement clinker, limestone, quartz, and refractory material grinding. The discharge can be either grate type or overflow type, depending on the desired fineness. Technical Features: Feeding size: ≤25 mm Discharge size: 0.075–0.4 mm Capacity: 0.65–90 t/h Liner material: High manganese steel or wear-resistant alloy Drive system: Gear-driven or direct-coupled motor Dust control: Equipped with air exhaust and dust collector Advantages: Suitable for materials sensitive to moisture No drying process required after grinding Lower corrosion risk and simpler maintenance Easier material classification and separation Limitations: Dry grinding produces more dust and heat, requiring efficient ventilation and dust collection systems. Wet Ball Mill A wet ball mill operates with water or another liquid medium added to the material. The slurry formed during grinding improves efficiency by reducing friction and preventing excessive heat buildup. It is widely used in ore beneficiation, ceramics, and chemical industries. Technical Features: Feeding size: ≤25 mm Discharge size: 0.074–0.2 mm Capacity: 0.65–615 t/h Liner material: Rubber or high-chromium steel Discharge method: Overflow or grate type Auxiliary equipment: Classifier, pump, and thickener for slurry circulation Advantages: Higher grinding efficiency and finer particle size Reduced dust and noise levels Continuous operation suitable for beneficiation circuits Better control of particle uniformity Limitations: Requires drying if the final product must be in powder form and involves more complex slurry handling. The selection between dry and wet grinding depends on the material characteristics, downstream process, and environmental conditions. Dry mills are preferred for materials that must stay moisture-free, while wet mills are ideal for fine grinding and slurry-based processes. Kdjdpfx Akjq Nx Alewjt Conclusion Dry and wet ball mills share the same mechanical structure but differ in their grinding environment and application scope. The dry type offers simplicity and low maintenance for moisture-sensitive materials, while the wet type provides higher efficiency and finer output for mineral and chemical processing. Understanding their technical parameters and operational differences ensures optimal equipment selection, improved productivity, and reliable performance in industrial grinding operations.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 400 kW (543.85 HP), Ore Beneficiation Plant for Nickel, Copper, Zinc, Graphite, Gold, Silver, Chrome, Quartz/Silica In today’s competitive mining and metallurgical industry, maximizing ore value is critical. Our state-of-the-art Ore Beneficiation Plant offers a complete solution designed to increase the content and quality of raw ore, transforming it into a marketable product ready for further processing or direct sale. Engineered for a wide range of minerals—including nickel, copper, zinc, graphite, gold, silver, chrome, and quartz/silica—our ore beneficiation plant delivers exceptional performance, efficiency, and reliability. Introduction Mining operations around the world face the challenge of processing ores that are often low in grade and require extensive refinement to be economically viable. Beneficiation—the process of increasing the concentration of valuable minerals—plays a vital role in reducing operational costs, enhancing recovery, and ultimately, ensuring profitability. Our ore beneficiation plant, also known as an ore processing plant or mine dressing plant, integrates advanced technology and robust engineering to deliver an efficient crushing, grinding, classifying, and separation process. Designed to handle a wide variety of ores, our plant is the ideal solution for mining companies looking to optimize their extraction and processing operations. Whether you’re processing nickel, copper, zinc, graphite, gold, silver, chrome, or quartz/silica, our plant provides the versatility and performance needed to meet today’s rigorous industrial standards. ## What Is an Ore Beneficiation Plant? An ore beneficiation plant is a facility where raw ore is processed to improve its quality and increase the concentration of valuable minerals. The plant typically includes several stages of processing: 1. Crushing: The raw ore is reduced in size to allow for more efficient downstream processing. 2. Grinding: Further size reduction to liberate the valuable minerals from the waste material. 3. Classifying: Separation of the ore into different size fractions using screening and hydrocyclones. 4. Separation: Employing various physical processes such as magnetic separation, flotation, or gravity separation to concentrate the valuable minerals. 5. Dewatering: Removal of excess water to prepare the concentrate for further processing or shipping. Kdedpeq Nw Uqefx Akwst This integrated process not only boosts the metal content but also minimizes waste, thereby improving overall cost efficiency and environmental sustainability.

Condition: new, Made in Italy Machine manufactured according to DIN 8606 Maximum turning height: 260 mm Turning diameter over bed: 520 mm Turning diameter over slide: 300 mm Distance between centers: 1,500 mm Bed width: 400 mm Spindle bore: 82 mm Spindle nose: Camlock 8" Spindle speeds: (24) 9 - 1600 rpm (Option 11 - 2000 rpm) Motor power: 5.5 kW (Option: 7.5 kW) Feed rate, Z-axis: (93) 0.028 - 6.43 mm/rev Feed rate, X-axis: (93) 0.012 - 2.73 mm/rev Threads, metric: (54) 0.5 - 224 mm Threads, Whitworth: (55) 72 - 1/8 TPI Threads, module: (54) 0.5 - 112 mm Threads, diametral pitch: (54) 64 - 1/4 D.P. Cross slide, WxL: 650 x 230 mm Cross slide travel: 340 mm Top slide, WxL: 350 x 150 mm Top slide travel: 150 mm Tailstock spindle diameter: 85 mm Tailstock spindle travel: 200 mm Tailstock taper: MK 5 Weight: approx. 3,100 kg Equipment: - Tailstock movement with pneumatic assistance - Acceptance test report according to DIN 8605, lathe with increased accuracy - Mechanical dual clutch - Electromagnetic brake - Rapid traverse for X and Z axes - Electrical equipment made of high-quality brand components, e.g. Siemens/Schneider - Lubrication of guide rails via hand pump - Reducing sleeve - 2 fixed centers - All safety devices according to CE standards: Chuck guard with plexiglass pane, secured with microswitches. Tool holder guard with plexiglass pane. Rear splash guard over the entire length. Lead screw and feed screw protection by means of a light curtain (integrated into the emergency stop circuit). Emergency stop button. - Chip tray on wheels - Electric coolant system - Fixed steady rest Kjdpsdvm Eusfx Akwjdt - Follower steady rest - Operating tools, acceptance test report according to DIN, operating and maintenance manual, complete electrical installation, machine manufactured according to the latest CE standard

Condition: used, functionality: fully functional, Manufacturer: Haaf (formerly Gema) Type: LZ 185 Swing diameter over bed 365 mm, over cross slide 225 mm Turning length 750 mm Center height 185 mm Spindle bore 40 mm Spindle flange KK5 (DIN 55022) Spindle bore MK5 Speed range 20 – 1,600 rpm Digital display Heidenhain VRZ 773 B in 2 axes Kdedpfx Aow Svtcjkwot (Scales on the cross slide and longitudinal slide) Dimensions 1,900 x 900 x 1,700 mm Spindle brake with foot pedal Adjustable stop on the cross slide (feed shut-off) Splash guard Accessories: - Operating manual - Multifix B holder with 2 inserts - Coolant pump integrated in the machine base (no coolant hose connected) - 3-jaw chuck Röhm 200mm with turning and drilling jaws Weight approx. 950 kg Condition: Used The machine runs smoothly and can be inspected while powered on. All information is without guarantee, errors and omissions excepted; all dimensions are approximate. This offer is non-binding. The machine can be inspected by appointment. Changes and errors in the technical data, specifications and prices, as well as prior sale, are reserved! All prices are net plus VAT. Payable by prepayment, including any freight costs, within 14 days after conclusion of the contract. If the purchase price is not paid in full within this period, the seller reserves the right to cancel the purchase contract. The sale is only made to entrepreneurs within the meaning of § 14 BGB. The machine is sold with exclusion of any warranty for defects. This exclusion does not apply to claims for damages arising from warranty for defects, which are based on a gross negligent or intentional breach of obligations by the seller or his agent, as well as in the event of injury to life, body and health. Any existing claims against third parties arising from warranty for defects are assigned to the buyer. Please understand that I cannot assume any liability for compliance with any safety regulations that may apply to you and are generally required for the sold machine and its components. Such compliance with safety regulations is the responsibility of the final operator. German law shall apply exclusively to all contracts concluded by me, to the exclusion of the UN Sales Convention. Mannheim is agreed as the place of jurisdiction.

Condition: excellent (used), Year of construction: 2009, operating hours: 4,824 h, functionality: fully functional, power: 5.52 kW (7.51 HP), 1 x Atlas Copco Airpower B.V. rotary screw compressor and refrigerant air dryer mounted on 200L receiver tank. Manufacturer - Atlas Copco Airpower B.V. Model - GX5 FF. Serial number - CAI361147. Kedpfx Akozu Aw Sjwjdt Date of manufacture - 2009. Working pressure - 10 bar. Working hours - 4824 hours. Electrical requirements: Compressor - 400 V / 50 hz / 3 phase. Air dryer - 230 V / 50 hz / 1 phase.

Condition: ready for operation (used), functionality: fully functional, WEILER COMMODOR lathe, from an educational institution Kodpfezww D Eex Akwodt -Maximum turning height 180mm -Maximum turning length 1000 mm -Spindle bore 56 mm -Speed range 56 - 2000 RPM -Automatic longitudinal/facing feeds -Threading capabilities / Metric / Inch etc. -Tailstock MK 4 -Three-jaw chuck 200mm -Multifix base with inserts -Electric chuck guard -L & Z spindle cover -Work light -Coolant system -2 x Emergency stop -Machine documentation Dimensions: L x W x H 2.5 x 1.1 x 1.7 meters / Weight 1500 kg Errors and omissions excepted.

Condition: ready for operation (used), functionality: fully functional, WEISSER HEILBRONN Junior / L & Z lathe with Heidenhain digital control -Center height 220mm -Turning diameter over bed 440mm Kdsdpfx Akozwggvjwet -Distance between centers 1000mm -Spindle bore approx. 50mm -Spindle speeds 40 - 2000 rpm -Automatic longitudinal / facing feeds -Threading / Metric / Inch, etc. -Heidenhain digital display ND 780 -Forkardt F250 3-jaw chuck -Multifix base and inserts -Electric chuck guard -Follow rest -L & Z spindle cover -Work light -Documentation Dimensions: L x W x H 2.6 x 1.3 x 1.8 meters / Weight approx. 1800 kg Errors and omissions excepted.

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, L & Z Lathe WEILER CONDOR B incl. three-axis digital display -CE marking -Machine from an educational institution / very well maintained -Center height 165mm -Swinging diameter over bed 330mm -Swinging diameter over cross slide 185mm -Turning length 800mm -Spindle speeds 22 - 2800 rpm -Automatic / longitudinal and cross feeds -Threading / metric / inch, etc. -Bar capacity 40mm -Tailstock / Morse taper MT3 -Multifix base and inserts -Three-jaw chuck 200mm -Electric chuck guard -Spindle cover Kodozvx A Tepfx Akwodt -2x Emergency stop -Coolant system -Chip guard -Documentation Dimensions: L x W x H 1.8 x 0.8 x 1.6 meters / Weight 1200 kg Errors and omissions excepted.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, L & Z Lathe / Bickenbach LE-20-10-S incl. 3-axis digital display -Very well-maintained, original condition from an educational institution -CE marking -Year of manufacture 2008 -Three-axis digital display -Turning diameter 420 mm -Turning diameter over the carriage 250 mm -Turning diameter in the crotch 580 mm -Turning length 1000 mm -Spindle speed range (gearbox) 20 - 2000 rpm -Spindle bore 58 mm Kedszvpxxepfx Akwedt -Tailstock taper MK 4 / quill travel 130 mm -Röhm 3-jaw chuck 250 mm & quick-change jaws -Fixed steady rest -Multifix base holder & 3x inserts -Coolant system -Folding protective device for tool holder -Electric chuck guard -Foot brake -Swivel machine lamp -Follower (Röhm) -Machine feet -Bed stop -Chip guard -Emergency stop -Operating tool Dimensions: L x W x H 2.1 x 0.8 x 1.7 meters / Weight 1600 kg Errors and omissions excepted.

Condition: ready for operation (used), Leading and feed spindle lathe Weiler Matador -Distance between centers: 500 mm -Swing over bed: 140 mm -Longitudinal feed range via belt: 0.05–0.40 mm/rev -Longitudinal feed range via change gears: 0.018–0.800 mm/rev -Spindle head: Size 5 Kdjdpfxoztbbts Akwet -Drive: Three-phase motor -Speed range: 15–3,550 rpm -Coolant pump -Chuck guard -Forkardt F 160 three-jaw chuck with wedge shank -Quick-change tool holder Multifix & insert -Drill chuck -Follower rest -Documentation Dimensions: L x W x H 1.5 x 0.6 x 1.2 meters / Weight 600 kg Errors and omissions excepted.

Condition: ready for operation (used), WEILER Matador VS 2, including a new three-axis digital display, from a school workshop. Kdedpfszr Rnyjx Akwjt -Maximum distance between centers: 140 mm -Distance between centers: 500 mm -Spindle speeds: 15 - 3550 rpm -Automatic longitudinal and cross feeds -Threading capabilities: metric, inch, etc. -New three-axis digital display -Electric chuck guard -Work light -Multifix base with inserts -Coolant system -Three-jaw chuck / collet chuck -Tailstock MK 3 -Various tools -Documentation Dimensions: L x W x H: 1.5 x 0.6 x 1.5 meters / Weight: 680 kg Errors and omissions excepted.

Condition: excellent (used), functionality: fully functional, grinding width: 1,350 mm, overall weight: 4,200 kg, Fine and smoothing sanding machine Heesemann, model: FGA 6 For intermediate lacquer sanding, wood surface smoothing, and sanding of foils The machine is fully functional, well maintained, and in very good technical condition. The conveyor belt has been replaced. Sanding width: 1300 mm Working height: 880 mm, constant Maximum workpiece thickness: 3–80 mm Transport bed: with individual transport belts Drive: 2.5 kW three-phase motor, including blow-off unit Feed speed: 4.5–22 m/min, adjustable Units Brush roller unit: centrally height-adjustable Diameter: 150 mm Drive power: 1.5 kW Bristle material: Fibre Longitudinal sanding unit Continuous electronic adjustment of the sanding belt speed via frequency inverter Wear-free brake unit Pneumatic belt tensioning Intermittent belt blow-off device Infrared belt control Counter-rotating sanding belt Sanding belt dimensions: 2620 x 1350 mm Belt sanding speed: 0.3–12 m/s Drive power: 11 kW Graphical operator terminal for inputting machine settings, including numeric thickness adjustment and displays for fault sources, workpiece throughput, and feed speed Electronically controlled pressure beam Control roller spacing: 40 mm Pneumatic belt tensioning The pressure beam's contact surfaces automatically adjust to the shape of the passing workpieces Workpiece vacuum hold-down system: Fan with 5.5 kW drive power Operator side and terminal: left Operating voltage: 400 V, 50 Hz Space requirements: 2550 x 2220 x 2300 mm Weight approx.: 4200 kg Ksdpfjya I Iusx Akwjdt (Technical specifications are subject to change and errors, as well as prior sale.)

Condition: ready for operation (used), L & Z lathe WEILER MATATOR incl. Heidenhain digital display ND 780 -Center height approx. 150mm -Swinging diameter over carriage approx. 160mm -Swinging diameter over bed approx. 300mm -Distance between centers approx. 500mm -Three-axis digital display / Heidenhain -Collets / quick-change tool holder & various collets -Chuck guard -Chip guard -Multifix base plate & inserts -Spindle bore 36mm -Speed range 30 - 3500 rpm Kodpfx Akszpba Ujwjdt -Automatic longitudinal / cross feeds -Tailstock MK 3 -Three-jaw chuck -Documentation Dimensions: L x W x H 1.6 x 0.7 x 1.6 meters / Weight 600 kg Errors and omissions excepted.

Condition: used, Universal lathe with guide and lead screw, TOS Trenčín SN 63 C (year of manufacture 2000) from a business liquidation. Designed with a 630 mm swing over bed and a 3000 mm distance between centers, suitable for medium to heavy shafts, flanges, and large cylindrical components. EQUIPMENT & TECHNOLOGY - Swing over bed: 630 mm - Distance between centers: 3000 mm (long bed version "C") - Hardened and ground bed ways - Guide and lead screw drive: Metric and inch threading Ksdpfx Aozphf Dskwedt - 2-axis digital readout (DRO) - Steady rests/follow rests available (see photos) The SN series from TOS Trenčín is considered a classic among conventional universal lathes – robust, precise, and easy to maintain. CONDITION Used, functional. Located near Nuremberg, viewing by appointment. Sold as is, no warranty. ACCESSORIES (as shown in the photos) - 3-jaw chuck - Fixed and traveling steady rests / follow rests - Tailstock with center - 4-way tool holder - Set of turning tools / quick-change tool holder - 2-axis digital readout (DRO) Price on request. We will be happy to advise you – competent advice and nationwide service.

Condition: new, spindle bore: 51 mm, turning diameter: 360 mm, turning length: 1,000 mm, – Centre distance 1000 mm – Swing diameter over bed 360 mm – Swing diameter over cross slide 230 mm – Spindle bore 51 mm – Longitudinal and cross feed – SINO digital readout on two axes – Brake – Coolant system – Lighting – Protective cover – Fixed steady rest – Follow rest – Three-jaw chuck – Four-jaw chuck – Emergency stop – Documentation Kdsdpfx Asyqx A Dskwet – 400V

Condition: new, Year of construction: 2026, We have various kinds of ball grinding mill such as batch ball mill, rod mill, cement ball mill, mining ball mill, welcome to contact our team for further details according to your specific requirements. Kodpfxsq I Nw Ie Akwedt

Condition: ready for operation (used), Year of construction: 2012, L & Z Spindle Lathe ZMM - CU 630 RD incl. Digital Display -CE marking -Digital display -Year of manufacture 2012 -Center height 315mm -Turning diameter over guides 630mm -Turning diameter over cross slide 430mm Kdsdszhx Hvopfx Akwot -Distance between centers 1500mm -Turning diameter with bridge removed 830mm -Spindle bore 103mm -Automatic longitudinal / facing feeds -Motorized rapid traverse in the carriage -Speed range 16 - 1250 RPM (stepless speed control) -Drive power 11Kw -Three-jaw chuck / ROTAX 315 incl. hard & soft jaws -Chuck guard -Tailstock -Steady rest -Multifix base with inserts -Coolant system -Work light Dimensions: L x W x H 3.5 x 1.5 x 1.7 meters / Weight 4000Kg Errors and omissions excepted.

Condition: good (used), functionality: fully functional, Internal article number: 26060 Lead screw and feed spindle lathe Leinen DLZ 140 + Digital display + Multifix "A" base plate Kdodpfxjzd Txls Akwst + Three-jaw chuck + Four-jaw chuck Center height: 140 mm Distance between centers: 500 mm Spindle speed: 15 - 3100 rpm This machine comes from an educational institution and is in good condition. You are welcome to inspect the machine while it is powered on, in our over 500 m² heated storage area.

Condition: ready for operation (used), L & Z Lathe WEILER Praktikant 800 R Kdjdpjzbiyhsfx Akwjt -Turning diameter over bed: 300mm -Turning diameter over cross slide: 150mm -Turning length: 800mm -Spindle bore: approx. 42mm -Speed range: 40 - 2000 rpm -Automatic longitudinal/facing feeds -Threading / Metric / Inch, etc. -Tailstock: MK 3 -Three-jaw chuck -Chip guard & work light -Chip tray -Change gears -Tool cabinet & operating tools -Documentation Dimensions: L x W x H 1.8 x 0.8 x 1.6 meters / Weight: 800 kg Errors and omissions excepted.