Used Unifiller Hopper Topper Powerlift for sale (1,666)

Year of construction: 2022, condition: excellent (used), functionality: fully functional,  Pump with a diameter of 76 mm and an outlet of 50 mm,  High-efficiency pump cylinder derived from the HT Max model,  Mobile stainless steel construction equipped with a height adjustment system, allowing adaptation to the customer's bowl,  Mass flow is controlled by pump speed adjustment, enabling the device to be tailored to different product types,  Ergonomic PowerLift technology. Gedpey E Tvcofx Alxoit HOPPER TOPPER POWERTOPPER transfer pump by Unifiller – year of manufacture: 2022. The offered device is practically as new, having only been used for a single trial batch (approximately 60 kg pumped).

Year of construction: 2021, operating hours: 30 h, condition: like new (used), functionality: fully functional, 1 x Unifiller Systems Inc. food depositor mounted on a mobile height-adjustable frame. This is a compact, versatile machine which is easy to clean for a quick product changeover. Handles most fillings without particulates Model - iSpot. Serial number - ISP103177-001-01. Gijdpfjyv E Ryox Alxjt Date of manufacture - 2021. Depositing range - adjustable. Speed - adjustable, up to 60 deposits / minute depending on volume. Operating temperature - up to +60C. Fits containers up to 23” deep (80 quart Hobart bowl). Condition - full working order and excellent condition for its age. Used sporadically over a period of around 5 months and is believed to have had less than 30 hours of run time.

Year of construction: 2007, condition: ready for operation (used), - USED - 2-AXIS CNC VERTICAL LATHE MAX ROTATING DIAMETER: 450 mm MAX TURNING LENGTH: 150 mm MAX TURNING DIAMETER: 370 mm COUNTER SPINDLE: 4500 rpm; 11-18,5 kW; 210 mm; ASA A2-6 X-AXIS TRAVEL: 260 mm Z-AXIS TRAVEL: 370 mm RAPID FEEDS X-Z: 30 - 30 m/min TURRET HEAD: 12 POS CONTROL UNIT: FANUC 0i-TC WEIGHT: 5000 Kg OVERALL DIMENSIONS: 2300 x 2850 x 2670 mm ACCESSORIES: SWARF CONVEYOR Giodpfx Aeyw Utgolxet NOTE: No 10 STATIONS STORAGE SYSTEM

Condition: ready for operation (used), Year of construction: 1996, CNC Lathe Tongtai Topper TNL - 100 TL / Fanuc OT - CE marking - Fanuc OT control - Max. turning diameter: 388 mm - Max. turning length: 580 mm - Bar capacity: 51 mm - Hollow spindle diameter: 62 mm - Spindle speed: 45 - 4500 rpm - Turret / 12 stations - Tool-Eye / tool measurement - Tool shank: 25 mm - Holder diameter: 32 mm - Axis travel X / Z: 200 & 600 mm - Rapid traverse X / Z axes: 20 & 24 m/min - Spindle motor: 15 kW - Tailstock - Foot switch - Machine leveling feet - Chip conveyor - Documentation Dimensions: LxWxH 2.6x1.8x2 meters / Weight 4700 kg Errors and omissions excepted. Giodpfx Aloyrn Eksxjt

Condition: ready for operation (used), Year of construction: 2011, Tongtai / Topper TMV - 720 A / Fanuc OI-MD Vertical Machining Center - CE marking Gisdpfx Aloyidrrjxot - Year of manufacture: 2011 - Control: Fanuc Oi-MD - Travel X / Y / Z: 720x480x530mm - Distance spindle nose / table: 100-630mm - Table size: 800x480mm - Max. table load: 500kg - Spindle taper: BT-40 - Spindle speed: 8000 rpm - Spindle motor: 7.5 / 5.5 kW - Rapid traverse X / Y / Z: 48 m/min each - Feed rate: 1-10000 mm/min - Tool changer: 24 positions - Tool change time (T-T): 3 sec - Max. tool weight: 7kg - Max. tool diameter: 80mm - Work light - Coolant system - Chip conveyor - Electronic handwheel Dimensions (LxWxH): 2.8x2.2x2.8 meters / Weight: 4400kg Subject to errors and omissions.

Condition: new, New Conveyor with overhead feeder hopper Both units are mobile on castors Feeder hopper with opening end door, adjustable exit gate to conveyor Godpfxjwd Ntho Alxeit Feeder hopper dimensions 800mm x 740mm x 600mm deep Conveyor belt dimensions 1800mm x 230mm W x 1260mm H Conveyor height is adjustable VFD on conveyor drive

Condition: ready for operation (used), functionality: fully functional, A good used Hopper Feeder fopr feeding small parts into assembly machine or feeding a bowl feeder with bulk parts - stainless steel conveyor - flighted belt (comes with a second spare belt also) - three phase geared drive unit - 24 V DC sensors (2) for control of belt index if required Giodjw D Ev Eopfx Alxet Ready to ship worldwide More pictures and videos available upon request

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: 18576, travel distance X-axis: 850 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 530 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 24 m/min, feed rate X-axis: 12 m/min, feed rate Y-axis: 12 m/min, feed rate Z-axis: 12 m/min, nominal power (apparent): 7 kVA, controller model: Fanuc Oi-MC, total height: 2,640 mm, total length: 2,870 mm, total width: 2,000 mm, table width: 500 mm, table height: 900 mm, table length: 950 mm, table load: 500 kg, overall weight: 5,000 kg, spindle speed (min.): 60 rpm, spindle speed (max.): 8,000 rpm, number of spindles: 3, number of slots in tool magazine: 24, tool length: 250 mm, tool diameter: 88 mm, tool weight: 7,000 g, Equipment: chip conveyor, documentation/manual, For sale: CNC milling machine Topper TMV850A, year of manufacture 2006, month 08, serial number 18576, in good working condition with the following specifications: Vertical machining center: model no.: TMV-850A Machine: Working area (LxW): 950 mm x 500 mm Longitudinal Travel (X): 850 mm Godpfxsyk E A Rs Alxoit Cross Travel (Y): 500 mm Vertical Travel (Z): 530 mm Distance between Spindle and Table Top: Max. 680 mm / Min. 100 mm Maximum Table Load: 500 kg Table Height: 900 mm Rapid Traverse (X/Y/Z): X, Y = 30 m/min, Z = 24 m/min Cutting Feed: 1–12,000 mm/min Servo Motor: X, Y: 2.1 kW, Z: 3.8 kW Spindle Taper: BT40 Spindle Speed: 60–8,000 rpm Spindle Motor: 5.5/7.5 kW Coolant Motor: 0.37 kW ATC (Automatic Tool Changer): Tool Selection: Random Tool Capacity: 24 (max) Max. Tool Diameter: 88 mm Max. Tool Diameter & Length: 250 mm Max. Tool Weight: 7 kg Tool Holder: BT40 Machine Height: 2,640 mm Net Weight: 5,000 kg Floor Space (LxW): 2,000 mm x 2,870 mm Machine Precision: Position 0.01 mm / Full travel accuracy: +/-0.005 mm

Condition: excellent (used), Working travels 510 x 360 x 300 mm Table size 600 x 360 mm Spindle taper BT30 Spindle speeds -12'000 rpm Tool changer 20 Pos. Giedpfxouy S Hbe Alxot Control FANUC 18i-MB Coolant through spindle misc. accessories MARCELS MASCHINEN CH

Condition: good (used), Year of construction: 2003, travel distance X-axis: 850 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 530 mm, For Sale: Topper TMV-850 Vertical Machining Center (2003) Reliable and precise vertical machining center for demanding production tasks. Specifications: Spindle: BT-40, 8,000 rpm, through-spindle coolant Gsdpexp Um Usfx Alxeit Travel: X = 850 mm, Y = 500 mm, Z = 530 mm Table size: 950 × 500 mm, load capacity 800 kg Tool changer: 24-position automatic tool changer (ATC) Control: FANUC 0i-MC – easy to operate and widely supported 4th axis: Enables machining of complex workpieces with high accuracy Chip removal: Two chip augers and a rear-mounted scraper conveyor for efficient chip handling Solid and well-maintained machine ready for immediate operation.

Condition: used, TECHNICAL DETAILS - Number of axes : 4 MILLING SPINDLE - Tool holder type : BT40 - Spindle power : 22 [kW] - Spindle speeds : 12.000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 560 x 560 x 560 [mm] - Rapid traverses rates (X/Y/Z) : 40.000 [mm/min] - Cutting feed rates (X/Y/Z) : 1 - 20.000 [mm/min] B ROTARY AXIS - Travel : 360 [°] - Indexing precision : 1 [°] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 60 - Tool exchange time : 1,2 [sec] PALLET CHANGER - Pallet changing device type : Rotopalette - Pallet size : 400 x 400 [mm] - Pallets number : 2 - Maximum weight upon pallet : 400 [kg] - Distance table / spindle axis (min./max.) : 80 - 640 [mm] - Distance table center / spindle nose (min./max.) : 150 - 710 [mm] - Maximum workpiece diameter : 600 [mm] - Maximum workpiece height : 700 [mm] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 3.600 x 3.750 [mm] - Machine height : 2.828 [mm] - Machine weight : 9.500 [kg] MACHINE HOURS - Number of hours under power : 9.893 [h] - Number of working hours : 2.138 [h] EQUIPMENT - CNC : Fanuc 18-iM - Electronic handwheel Gjdeuhbv Eepfx Alxjit - Rigid tapping - Coolant tank * Coolant through spindle * With cabin washing - Chips conveyor - Spindle cooling unit

Condition: good (used), Year of construction: 2010, Internal item no.: 26046 Granulate drying plant + Multi-hopper system SOMOS D200 Gjdpfx Asy R Rumolxoit Year of manufacture: 2010 10x hopper Including electrical wiring diagram and operating manual

Condition: used, 5 material hoppers, each with a 50-litre capacity. Versions available with various machine flanges: 70 × 10 mm, 80 × 15 mm, 100 × 15 mm. Five hoppers including matching lids. Price per unit: €95.00 (material hopper incl. flange and lid). If you are interested, I look forward to hearing from you. Gisdpfx Ajy Nnhbolxst

Condition: excellent (used), Manufacturer: MORETTO S.P.A. Giedpfxjt H Ndpe Alxot -type: Hopper Loader; Serial.: 1302868; Model: F3F40 -electrical data: 230V; 50/60Hz; 1kW -capacity: 50dm3/h -weight: 11 kg

Condition: reconditioned (used), Technical data feed hopper with hydraulic moving floor and bag opener for recyclables from yellow bags and residual waste: Manufacturer BRT HARTNER GmbH Gjdpfx Aljyizxrjxoit Type HP5-3035 Year of construction 2015 Hopper volume 30 m³ Drive line 17.5 kW Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Condition of the machine: The feed hopper with bag opener was used at a large recycling plant, where recyclable materials from yellow bags or commercial waste were tipped into the hopper using wheel loaders, the bags were opened using the bag opener, and the recyclable materials were transported to a sorting plant or the commercial waste was transported in measured quantities for further processing. The system functioned flawlessly until it was dismantled and replaced with a larger system with higher throughput capacity. The machine was dismantled into individual parts in our workshop, partially overhauled, reassembled, and tested during operation. The following overhaul work was carried out and the following spare parts were replaced: Dismantling of the feed hopper and bag opener into individual parts. Cleaning, partial sandblasting, priming and painting of the steel parts. Various wear and cover plates were newly manufactured and installed. Cutting off the worn ends (approx. 40cm) of the push floor pipes. Welding on the new pipes and smoothing the push floor pipes. Replacement of all plastic sliding plates for the hydraulic push floor. Removal of the hydraulic unit from the push floor, emptying of the hydraulic oil tank, replacement of the oil filters, refilling with new hydraulic oil. Replacement of the three hydraulic blocks, all valves, the oil sight glass and all hydraulic hoses from the hydraulic unit. The seal kit and hydraulic hoses were replaced on all three hydraulic cylinders of the push floor. All six limit switches (proximity sensors) on the push floor were replaced. The conveyor chains on the left and right of the scraper conveyor were replaced. Seven carrier bars on the scraper conveyor were replaced. The drive motor for the ripper blades was replaced. All nine pneumatic cylinders for the pressure pipes were replaced. All pneumatic lines and connections were replaced. All of the plastic sliding plates for the hydraulic operation of the bag opener were replaced. The bag opener can be moved vertically so that the system can also be used for commercial waste or residual waste without the bag opener. The side impact protection plates on both sides were replaced. Various wear parts of the bag opener have been replaced. The entire system has been rewired and reconnected. The system control in the control cabinet has been retrofitted by the manufacturer BRT Hartner to a self-sufficient individual control system and the standard programme has been reloaded into the control system. The system has been commissioned and tested by the manufacturer BRT Hartner, see the function video. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: good (used), Asphalt unloading devices Giedoy Dix Rjpfx Alxjt

Condition: not inspected (used), Year of construction: 1959, functionality: unexamined, pressing force: 8 t, stroke length: 56 mm, total length: 1,600 mm, total width: 1,000 mm, overall weight: 300 kg, No reserve price – guaranteed sale to the highest bidder! Placing a bid commits you to timely collection between 23/06/2026 and 26/06/2026! TECHNICAL DETAILS Pressing force: 8 t Adjustable stroke: 8 mm to 56 mm Ram adjustability: 30 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,600 x 1,000 x 1,500 mm Weight: 300 kg EQUIPMENT Feed hopper (diameter: 500 mm) External reference: 36 Gsdpfx Alsy D S H Rsxsit

Condition: not inspected (used), Year of construction: 1968, functionality: unexamined, pressing force: 8 t, stroke length: 56 mm, total length: 1,600 mm, total width: 1,000 mm, overall weight: 300 kg, No minimum price – guaranteed sale to the highest bidder! Gsdjy D S A Ejpfx Alxjit Bidding obliges prompt collection between 23/06/2026 and 26/06/2026! TECHNICAL DETAILS Press force: 8 t Adjustable stroke: 8 to 56 mm Ram adjustment: 30 mm MACHINE DETAILS Dimensions & weight Dimensions (L x W x H): 1,600 x 1,000 x 1,500 mm Weight: 300 kg EQUIPMENT Feeder bowl (diameter: 500 mm) External reference: 37

Condition: not inspected (used), Year of construction: 1956, machine/vehicle number: 9904, functionality: unexamined, pressing force: 8 t, stroke length: 70 mm, table width: 350 mm, table length: 440 mm, overall weight: 600 kg, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect the item on time between 23/06/2026 and 26/06/2026! TECHNICAL DETAILS Pressing force: 8 t Adjustable stroke: 8 - 70 mm Ram adjustment: 30 mm Gisdpfx Alsy D Sp Ssxot Table dimensions: 440 x 350 mm MACHINE DETAILS Dimensions & weight Dimensions (L x W x H): 1,300 x 1,100 x 1,300 mm Weight: 600 kg EQUIPMENT Conveyor by manufacturer RNA (diameter: 550 mm) External reference: 62

Condition: not inspected (used), functionality: unexamined, overall weight: 80 kg, total height: 1,200 mm, rotational speed (max.): 3,000 rpm, machine/vehicle number: 05133, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates the buyer to collect the item on time between 23/06/2026 and 26/06/2026! Gedpfx Asy D Nhlelxoit TECHNICAL DETAILS Speed: 3,000 rpm MACHINE DETAILS Rated voltage: 200 V Frequency: 50 Hz Rated current: 3.77 A Power: 753 VA Vibration frequency: 50 Hz Dimensions & Weight Dimensions (L x W x H): 600 x 500 x 1,200 mm Weight: 80 kg External reference: 61

Condition: new, Year of construction: 2025, Workshop workstation with adjustable worktop height – Workbench PowerLift Concept M We offer a professional workshop workstation – PowerLift Concept M. A robust, height-adjustable table designed to meet the needs of demanding users. Key product features: Adjustable worktop height: Reliable mechanical height adjustment allows you to set the working height to individual requirements, ensuring ergonomic and comfortable working conditions. Solid construction: Made of top-quality materials, guarantees stability even under uneven load distribution. Load capacity up to 500 kg: Designed to handle heavy tools and materials, ideal for intensive use. Mobility: Extendable castors allow for easy movement of the workstation within the workshop, without compromising stability during operation. Lighting: Equipped with a professional lamp featuring adjustable light intensity, controlled locally by a dial or through a building management system. Standard configuration includes DALI system lighting. Electrical panel: Standard features include an emergency stop button, three 230V sockets, and a light intensity controller, enhancing both functionality and work safety. An additional fourth socket is located beneath the worktop. Tool board: Perforated panel enables convenient tool organization, helping to keep the workstation tidy. Why choose PowerLift Concept M? As a renowned manufacturer of workshop tables, Karnatech offers a product that is 100% made in Poland, characterized by outstanding quality and attention to detail. The PowerLift Concept is an investment in a durable and functional workstation that will meet the expectations of even the most demanding professionals. Height adjustment range: approx. 760–1130 mm Height adjustment of both the worktop and tool board is carried out mechanically using the included folding crank or any standard power screwdriver. Gsdpfoww Axqox Alxoit Contact and additional information: Power Lift Concept M is one of several models in our range of workbenches. For more information, please visit the Karnatech website. We invite you to contact us by email or phone for detailed information and to place an order. We also offer the option to build a workstation tailored to your individual requirements.

Condition: used, Wood chip discharge hoppers with auger Gijdpoy Dtqkjfx Alxet

Condition: used, functionality: fully functional, gearing type: mechanical, fuel type: electric, Year of construction: 2019, Height: approx. 4,700 mm Bunker volume: approx. 60 m³ Plate conveyor width / length: approx. 1,150 x 4,800 mm Length: approx. 7,400 mm Width: approx. 5,200 mm Giodpewk E Emjfx Alxst Bonfigioli gearbox: Type SK 185 Siemens electric motor: 346 to 524 volts, 160 watts

Condition: excellent (used), Year of construction: 2019, Plastic raw material hopper Year of manufacture: approx. 2019 12 units available Gedpfsy Dgv Tox Alxsit

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, overall weight: 1,300 kg, load capacity: 160 kg, throat depth: 3,500 mm, working height: 2,150 mm, Al-Vac Powerlift. Mobile column jib crane with articulated arm. Mounted on a robust steel base/foot, the crane can be positioned on a flat surface for immediate use. Alternatively, it can be permanently anchored into a concrete floor if required. The lifting and lowering function is controlled by simply raising or lowering by hand directly above the hook, making lifting loads of up to 160 kg feel effortless - like lifting by hand. Reach: 3500 mm. The innermost joint of the jib rotates approximately 270 degrees, with the outermost joint offering slightly more rotation, providing full access around the entire column. Load capacity: 160 kg. Giodjywti Topfx Alxjt Lifting height: 2150 mm + 120 mm base. Overall height: 3560 mm + 120 mm base. Height under jib: 3330 mm + 120 mm base. Loading and delivery available for an additional fee. Disassembly for cost-effective transport possible. The crane requires a 230 V power connection and is ready for immediate use. Extremely user-friendly operation. The crane was manufactured in 2010 but is in almost as-new mechanical condition. A comparable new unit costs approximately €26,000 today. A demonstration video can be sent via WhatsApp on request.